Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
125 views2 pages

PBM Protection, Control and Monitoring System

Uploaded by

aroln

The document describes the PBM motor protection system including the PBM-B base module and optional PBM-H display module. The PBM-B provides protection functions like overload protection, phase imbalance detection, and earth leakage protection. It monitors parameters like operating hours and number of faults. The optional PBM-H display module provides an LCD screen and keys for viewing statuses, controls, and settings. Both modules support Modbus RTU communication and come in different models to support various motor voltages and currents.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

PBM Protection, Control and Monitoring System

Uploaded by

aroln
125 views2 pages
The document describes the PBM motor protection system including the PBM-B base module and optional PBM-H display module. The PBM-B provides protection functions like overload protection, phase imbalance detection, and earth leakage protection. It monitors parameters like operating hours and number of faults. The optional PBM-H display module provides an LCD screen and keys for viewing statuses, controls, and settings. Both modules support Modbus RTU communication and come in different models to support various motor voltages and currents.

Original Title

EN_FANOXPC_DATA_MPC_MotorProtection_PBM_R04.pdf

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

The document describes the PBM motor protection system including the PBM-B base module and optional PBM-H display module. The PBM-B provides protection functions like overload protection, phase imbalance detection, and earth leakage protection. It monitors parameters like operating hours and number of faults. The optional PBM-H display module provides an LCD screen and keys for viewing statuses, controls, and settings. Both modules support Modbus RTU communication and come in different models to support various motor voltages and currents.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
125 views2 pages

PBM Protection, Control and Monitoring System

Uploaded by

aroln
The document describes the PBM motor protection system including the PBM-B base module and optional PBM-H display module. The PBM-B provides protection functions like overload protection, phase imbalance detection, and earth leakage protection. It monitors parameters like operating hours and number of faults. The optional PBM-H display module provides an LCD screen and keys for viewing statuses, controls, and settings. Both modules support Modbus RTU communication and come in different models to support various motor voltages and currents.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2

PBM

PBM Protection, Control and Monitoring System

MOTOR MANAGEMENT SYSTEM PBM B ProtecTION FUNCTIONS

INTEGRAL SOLUTION FOR MCCs ADAPTABLE


Overload with thermal
TO EVERY CUSTOMER NEEDS
image
MULTIFUNCTION
FAULT REPORTS Overheating protection
4 fault reports with the following information: dates, (PTC sensor)
measurements, status bits, inputs and outputs.
SELF-DIAGNOSIS, INSTALLATION Phase imbalance or
MONITORING AND STATISTICS phase failure
• Earth toroidal disconnection monitoring.
• PTC sensor open circuit and short circuit Phase sequence
detection.
PBM H
• Magnetic module hardware monitoring. JAM detection
• N on-volatile memory stored information
coherence. Locked rotor
detection
• Number of motor start ups.
•M  edium and maximum current of last start up. Instantaneous earth
• Number of faults for the following functions: leakage overcurrent
Overload, PTC, JAM, locked rotor and neutral
faults. Earth leakage inverse
• Operating hours counter. time overcurrent
• Test menu.
Instantaneous neutral
DESIGNED FOR SCADA APPLICATIONS overcurrent
RTU Modbus protocol and RS485 communication
COMMANDS MANAGEMENT Neutral inverse time
• Start/Stop by 2 or 3 wires, without additional overcurrent
switches of push-buttons
• Remote Start/Stop, more efficiency and cost Undercurrent
saving.
COMMUNICATION SOFTWARE PBCom

PBM B
base MODULE
Current measurement is obtained from the motor line through the From 0,8 up to 25 A with internal current transformers.
magnetic module without need of external current transformers. Over 25 A with external current transformers.

PBM-B1 PBM-B5
MODELS
PBM-B11 PBM-B12 PBM-B51 PBM-B52
Adjustment range Ib (A) 0,8-6A 0,8-6A 4-25A 4-25A
Auxiliary supply 110/230Vac-dc 24/48Vdc 110/230Vac-dc 24/48Vdc
Frequency 50/60/ variable (45-65) Hz
Maximum motor nominal voltage 1.000 Vac
CODE 17000 17002 17001 17003
For IN of the motor below the minimum setting IB Pass the cables several times (n) through the holes in the relay IB = n x IN

For IN of the motor above the maximum setting IB Use 3 CT .../5 and the relay PBM B and pass the secondary through the holes

OTHERS CHaracterIstics
Optional PBM-H display module HMI
Inputs 1 x PTC temperature sensor, 1 x Toroidal transformer (external earth fault), 1 x Digital input 24 Vdc
Outputs 2 x NO-NC contact
Short circuit withstand rating 5000 A to 0,5s (SCR 5000@0,5s)
Communication RS485 ModBus RTU
Signalling 5 signalling LEDs
Reset mode Manual, automatic and automatic time delayed
Test Specific test menu
Operating temperature - 10ºC + 60ºC

88
PBM H

DISPLAY MODULE HMI

This is an optional display module with an LCD screen for signalling, control and setting.
The LEDs can be configured and are identified by labels.
Access to menus is intuitive and direct, making protection system commissioning easier.

CODE ACCESORIES LANGUAGE


17015 PBM - H1S1 Spanish
17016 PBM - H1F1 French
17017 PBM - H1E1 English
17018 PBM - H1P1 Polish
17019 PBM - H1G1 German
79229 CD PBM
17008 CDCNB CABLE 0,5 M
17009 CDCN1 CABLE 1 M
CHaracterIstics PBM H
LCD Display 20 x 2 alphanumeric characters
Keyboard 9 keys
Communication RJ45 connector to relay
Signalling 6 configurable signalling LEDs
Reset mode Manual, automatic and automatic time delayed
Test Specific test menu

FUNCTION DIAGRAM PBM B DIMENSIONS (mm)

PBM B PBM H
108mm

Ø 10
98 mm

80

99
mm
78 17
,3

CONNECTION DIAGRAM PBM B

89

You might also like