Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
327 views

Some Basic Intensity Transformation Functions

This document summarizes several basic intensity transformation functions used in image processing: 1. Negative transformations invert the intensity levels of an image, making black areas white and vice versa. This enhances detail in dark regions. 2. Log transformations map a narrow range of low intensities to a wider output range, compressing higher values. This spreads dark pixels while compressing bright ones. 3. Power-law (gamma) transformations also map dark pixels more than bright ones, with the curve determined by the gamma exponent. Gamma correction is used to adjust for device responses that follow a power law.

Uploaded by

Krishanu Modak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
327 views

Some Basic Intensity Transformation Functions

This document summarizes several basic intensity transformation functions used in image processing: 1. Negative transformations invert the intensity levels of an image, making black areas white and vice versa. This enhances detail in dark regions. 2. Log transformations map a narrow range of low intensities to a wider output range, compressing higher values. This spreads dark pixels while compressing bright ones. 3. Power-law (gamma) transformations also map dark pixels more than bright ones, with the curve determined by the gamma exponent. Gamma correction is used to adjust for device responses that follow a power law.

Uploaded by

Krishanu Modak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Some Basic Intensity Transformation Functions

Intensity transformations are among the simplest of all image processing


techniques. The values of pixels, before and after processing, will be denoted by r and s,
respectively. These values are related by an expression of the form s = T(r), where T is a
transformation that maps a pixel value r into a pixel value s.

Image Negatives

1. The negative of an image with intensity levels in the range [0, L - 1] is obtained
by using the negative transformation shown above.

2. It is given by the expression

where L = number of gray levels

3. Reversing the intensity levels of an image in this manner produces the


equivalent of a photographic negative.
4. This type of processing is particularly suited for enhancing white or gray detail
embedded in dark regions of an image, especially when the black areas are
dominant in size.

5. A common example of digital negative is the displaying of an X-ray image.

6. Negative simply means inverting the gray levels i.e black in the original image
will now look white and vice versa.

Log Transformations

1. The general form of the log transformation in Fig. 3.3 is

where c is a constant, and it is assumed that r ≥ 0.

2. The shape of the log curve in Fig. shows that this transformation maps a narrow
range of low intensity values in the input into a wider range of output levels. The
opposite is true of higher values of input levels.

3. We use a transformation of this type to expand the values of dark pixels in an


image while compressing the higher-level values. The opposite is true of the
inverse log transformation.

4. Any curve having the general shape of the log functions shown in Fig. would
accomplish this spreading/compressing of intensity levels in an image

5. The log function has the important characteristic that it compresses the dynamic
range of images with large variations in pixel values.

6. A classic illustration of an application in which pixel values have a large


dynamic range is the Fourier spectrum.
Power-Law (Gamma) Transformations

1. Power-law transformations have the basic form

………………………….(1)

where c and g are positive constants.

2. Sometimes Eq. (1) is written


as to account for an offset (that is, a measurable output when the input is zero).
However, offsets typically are an issue of display calibration and as a result they
are normally ignored in Eq. (1).

Fig: Plots of s versus r for various values of ϒ


3. As in the case of the log transformation, power-law curves with fractional
values of ϒ map a narrow range of dark input values into a wider range of output
values, with the opposite being true for higher values of input levels.

4. Unlike the log function, however, we notice here a family of possible


transformation curves obtained simply by varying ϒ.

5. As expected, we see in Fig that curves generated with values of ϒ > 1 have
exactly the opposite effect as those generated with values of ϒ < 1. Finally, we
note that Eq. (1) reduces to the identity transformation when c = ϒ = 1.

6. A variety of devices used for image capture, printing, and display respond
according to a power law. By convention, the exponent in the power-law equation
is referred to as gamma [hence our use of this symbol in Eq. (1)].

7. The process used to correct these power-law response phenomena is called


gamma correction. For example, cathode ray tube (CRT) devices have an
intensity-to-voltage response that is a power function, with exponents varying
from approximately 1.8 to 2.5. With reference to the curve for ϒ = 2.5 in Fig, we
see that such display systems would tend to produce images that are darker than
intended. Gamma correction in this case is straightforward. All we need to do is
preprocess the input image before inputting it into the monitor by performing the
transformation s = r1/2.5 = r0.4 . When input into the same monitor, this gamma-
corrected input produces an output that is close in appearance to the original
image

You might also like