WD73C9

Ser vice
Version 9.0 01/28/2011 2009
Manual
MITSUBISHI ELECTRIC
DLP PROJECTION HDTV
V41C, V41 & V41+ CHASSIS
V41C Chassis V41 Chassis

WD-60C9 WD-60737
WD-52327 WD-65C9 WD-65737
WD-52527
WD-73C9 WD-73737
V41+ Chassis WD-82737
WD-65837
WD-73837
WD-82837
Pb Solder
CAUTION:
Before servicing this chassis, it is important that the service person read the "SAFETY PRECAUTIONS" and
"PRODUCT SAFETY NOTICE" contained in this manual.
SPECIFICATIONS
• Power Input : AC 120V, 60Hz • Speakers : Two 5½"x2¼" Oval (8Ω 10W)
• Power Usage : See table on page 5 • Input Level : VIDEO IN JACK (RCA Type)
1.0Vp-p 75Ω unbalanced
• Light Engine : DLPTM (1080p) : AUDIO IN JACK (RCA Type)
5 Primary Color System -4.7dBm 43kΩ unbalanced
• Light Source : 180W • Output Level : AUDIO OUT JACK (RCA Type)
-4.7dBm 4.7kΩ unbalanced
• Channel Range : Analog Cable - 1~125
Digital Cable - 1~135 • Digital : AC-3 Digital Audio Output
(RCA Type)
• Antenna Input : 1 RF 75Ω unbalanced : HDMITM
:
IR Blaster Output (V41+ only)
• Tuning : 1 NTSC/ATSC/QAM :
USB
: PC - use HMDITM \
• Cabinet Dimensions : See Table on page 5 :
Wired IR Input (V41+ only)
• Weight : See table on page 5
• Design specifications are subject to change without notice.
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

9351 Jeronimo Road, Irvine, CA 92618-1904
Copyright © 2009 Mitsubishi Digital Electronics America, Inc.
All Rights Reserved
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737
WD-65837 / WD-73837 / WD-82837
CONTENTS
INTRODUCTION ................................................................................................................................ 5
Dimensions, weight, power usage, etc. ........................................................................................... 5
PRODUCT SAFETY NOTICE ............................................................................................................. 5
SAFETY PRECAUTIONS ................................................................................................................... 6
DISASSEMBLY .................................................................................................................................. 7
Back Cover Removal ....................................................................................................................... 7
Chassis Removal ............................................................................................................................ 7
Rear Terminal Cover Removal .......................................................................................................... 8
Power Supply Shield Removal
PWB-POWER Removal .................................................................................................................. 8
Top Chassis Brackets Removal ....................................................................................................... 9
PWB-MAIN Removal ....................................................................................................................... 9
Optical Engine Assembly Components and Connector Locations ................................................. 10
PWB-BALLAST Removal .............................................................................................................. 10
Optical Engine Assembly Removal ................................................................................................ 11
Duct Assembly Removal ............................................................................................................... 11
Optical Engine Replacement ......................................................................................................... 13
Color Wheel Replacement ............................................................................................................ 14
Projection Lens Replacement ....................................................................................................... 15
SCREEN REPLACEMENT ................................................................................................................ 16

Screen Replacement 60” 65” 73” ................................................................................................... 16
Screen Replacement 82”............................................................................................................... 19
MIRROR REPLACEMENT ................................................................................................................ 22
SPEAKER & PWB-SBL Replacement ............................................................................................ 23
INITIALIZATION, INITIAL SETTINGS & TROUBLESHOOTING ....................................................... 22

Remote Control ............................................................................................................................. 24
Option Menu ................................................................................................................................. 25
Reset and Initialization .................................................................................................................. 26
Initial Settings ............................................................................................................................... 27
A/V Reset ..................................................................................................................................... 28
LED Indications & Self Diagnostics ............................................................................................... 29
Error Codes .................................................................................................................................. 30
Error Code Log.............................................................................................................................. 30
SERVICE ADJUSTMENTS ............................................................................................................... 31

Equipment & Test Signals ............................................................................................................. 31
Service Mode ................................................................................................................................ 31
Horizontal & Vertical Position Adjustment ..................................................................................... 32
Index Delay Adjustment ................................................................................................................ 32
Manual Geometry Alignment ......................................................................................................... 33
Phase 1 - 16 Point Alignment ............................................................................................... 33
Phase 2 - 4:3 and 16:9 Alignment ........................................................................................ 33
Phase 3 - Touch Up Alignment ............................................................................................. 35
Data Transfer ....................................................................................................................... 36
USING LEAD FREE SOLDER .......................................................................................................... 37
Page 3
WD-65837 / WD-73837 / WD-82837
CHIP PARTS REPLACEMENT ......................................................................................................... 38
REPLACEMENT PARTS .................................................................................................................. 39

Parts Ordering .............................................................................................................................. 39
Critical and Warranty Parts Designation........................................................................................ 39
Parts Tolerance Codes .................................................................................................................. 39
PARTS QUICK REFERENCE LIST ................................................................................................... 40
SERVICE PARTS LIST .................................................................................................................... 41
SCREEN ASSEMBLY PARTS LIST .................................................................................................. 47
MIRROR KITS AND PREPARATION ................................................................................................ 49
CIRCUITRY BLOCK DIAGRAMS ..................................................................................................... 51

Main Power Supply ....................................................................................................................... 51
DC to DC Supplies ........................................................................................................................ 52
Power Control ............................................................................................................................... 53
System Control ............................................................................................................................. 54
Lamp Control ................................................................................................................................ 55
Audio/Video Signal Path ............................................................................................................... 56
SCHEMATIC DIAGRAMS
Digital Light Processing®, Digital Micro Mirror Device and DLP® are Trademarks of Texas Instruments.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC..
Page 4
WD-65837 / WD-73837 / WD-82837
INTRODUCTION
This service manual provides service instructions for the V41C, V41 and V41+ chassis types. The specific models for
each chassis type, dimensions and weight are listed below . Service personnel should read this manual thoroughly
before servicing these chassis.
POW ER
M ODEL CHASSIS HEIGHT W IDTH DEPTH W EIGHT
USAGE
W D-60C9 V41C 36.7" 53.9" 14.4" 64.9 lbs 260W
W D-60737 V41 36.7" 53.9" 14.4" 64.9 lbs 260W
W D-65C9 V41C 39.5" 58.2" 15.3" 72.2 lbs 260W
W D-65737 V41 39.5" 58.2" 15.3" 72.2 lbs 260W
W D-65837 V41+ 39.5" 58.2" 15.3" 72.2 lbs 260W
W D-73C9 V41C 43.6" 65.2" 17.5" 92.84 lbs 260W
W D-73737 V41 43.6" 65.2" 17.5" 92.84 lbs 260W
W D-73837 V41+ 43.6" 65.2" 17.5" 92.84 lbs 270W
W D-82737 V41 48.5" 73.2" 22.7" 139.7 lbs 270W
W D-82837 V41+ 48.5" 73.2" 22.7" 139.7 lbs 270W
This service manual includes:

1. Assembly and disassembly instructions for cabinet and chassis components.
2. Servicing of the Lenticular Screen and Fresnel Lens.
3. Servicing printed circuit boards (PCBs).
4. Electrical and Mechanical adjustments.
6. Chip parts replacement procedures.
7. Circuit block diagrams.
The parts list section of this service manual includes:

1. Cabinet and screen parts.
2. Electrical parts.
Schematic and block diagrams of the above listed models are included in this service manual for better understanding
of the circuitry.
PRODUCT SAFETY NOTICE

Many electrical and mechanical parts in television receivers have special safety related characteristics. These charac-
teristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by
using replacement components rated for higher voltage, wattage, etc.
Replacement parts which have special safety characteristics are identified in this service manual.
Electrical components having such features are identified by shading on the schematic diagram and parts list of this
service manual. The replacement for any safety part should be identical in value and characteristics.
The PWBs used in this chassis are constructed using Lead-Free Solder. When servicing use
Pb Solder only recommended Lead-Free Solder. Refer to the section “Using Lead Free Solder.”
Page 5
WD-65837 / WD-73837 / WD-82837
SAFETY PRECAUTIONS
NOTICE: Observe all cautions and safety related notes located inside the receiver cabinet and on the
receiver chassis.
WARNING:
1. Operation of this receiver outside the cabinet or with the cover removed presents a shock hazard
from the receiver's power supplies. Work on the receiver should not be attempted by anyone who is
not thoroughly familiar with the precautions necessary when working on high voltage equipment.
2. When service is required, observe the original lead dress. Where a short-circuit has occurred, replace
those components that indicate evidence of overheating.
SAFETY PRECAUTION
To protect your eyes, do not look directly into the lamp, or light coming directly from the lamp, lens or
mirror.
Leakage current check

Before returning the receiver to the customer, it is recommended that leakage current be measured according to the
following methods.
1. Cold Check
With the alternating current (AC) plug removed from the AC source, place a jumper across the two AC plug
prongs. Connect one lead of an ohm meter to the AC plug and touch the other lead to each exposed metal part
(i.e. antennas, handle bracket, metal cabinet, screw heads, metal overlay, control shafts, etc.), particularly any
exposed metal part that has a return path to the chassis. The resistance of the exposed metal parts having a
return path to the chassis should be a minimum of 1Meg Ohm. Any resistance below this value indicates an
abnormal condition and requires corrective action.
2. Hot Check ...Use the circuit shown below to perform the hot check test.
1. Keep switch S1 open and connect the receiver to the measuring circuit. Immediately after
connection, and with the switching devices of the receiver in their operating positions, measure the
leakage current for both positions of switch S2.
2. Close switch S1, energizing the receiver. Immediately after closing switch S1, and with the
switching devices of the receiver in their operating positions, measure the leakage current for both
positions of switch S2. Repeat the current measurements of items 1 and 2 after the receiver has
reached thermal stabilization. The leakage current must not exceed 0.5 milliampere (mA).
TOUCH ALL
OPEN EXPOSED
GROUND METAL PARTS
S2 RECEIVER
L
AC MA
METER
S1 N
INSULATED TABLE
SUPPLY CONNECTOR GROUND
GWG - Green Wire Ground

(Earth Ground)
Page 6
WD-65837 / WD-73837 / WD-82837
DISASSEMBLY
BACK COVER REMOVAL
BACK A
COVER
A
A
LAMP
COVER
A A 73" & 82" Models

Only
Back Cover Removal
1) Remove screws (A) from the back cover.
2) Remove the back cover from theTV.
CHASSIS REMOVAL & DISASSEMBLY
Side View
A
Chassis Removal
1) Remove five screws (A), one side, four rear.
2) Disconnect all cables connecting to the chassis.
3) Slide the chassis out of the cabinet.
Page 7
WD-65837 / WD-73837 / WD-82837
CHASSIS REMOVAL & DISASSEMBLY (Continued)
PG2
(Rear)
(V41+)
C
RS232C
A
D
D
Rear Terminal Cover Removal
1) Remove nut (A) from theANT input.
2) Disconnect connector PG2 from the rear of the RS232C assembly (V41+ only).
3) Remove screws (C) and (D).
4) Remove the Terminal Cover from the chassis.
POWER
SUPPLY HEAT
SHIELD SINK
Power Supply Shield Removal
1) Remove screw (A).
2) Remove the Power Supply Shield
from the chassis. PWB
POWER
PWB-POWER Removal B
1) Remove screws (B).
2) Disconnect all cables from the
PWB-POWER.
3) Lift the PWB-POWER from the
chassis.
PWB-POWER Installation
NOTE: The PWB-POWER should A
be re-installed so the Heat Sink is
opposite the Power Supply Shield.
Page 8
WD-65837 / WD-73837 / WD-82837
CHASSIS REMOVAL & DISASSEMBLY (Continued)
A A
TOP CHASSIS
BRACKETS
Top Chassis Brackets Removal

NOTE: Removal of the Power Supply Shield and PWB-POWER is not required to remove the
Top Chassis
Brackets.
1) Remove screws (A).
2) Disconnect all cables from the PWB-POWER.
3) Lift the Top Chassis Brackets from the chassis.
PWB-MAIN Removal A
1) Disconnect all cables to PWB-MAIN.
2) Remove screws (A) from the DVI
connector.
3) Remove screws (B) from the Side
DVI
Terminals.
4) Remove screw (C) from the Side
HDMI connector (V41+ only).
5) Remove screws (D). B D
6) Lift the PWB-MAIN out of the
chassis.
HDMI
C
(V41+)
PWB-MAIN Installation
1) Install screws (A) (B) and (C) first.
2) Then install screws (D).
3) Perform “Restore Engine Data From Backup” (See Dat
a Transfer in Service Adjustments section).
4) Perform “Restore Geometry Data From Backup” (See Data Transfer in Service Adjustments section).
Page 9
WD-65837 / WD-73837 / WD-82837
OPTICAL ENGINE ASSEMBLY

OPTICAL ENGINE ASSEMBLY - COMPONENT AND CONNECTOR LOCATIONS
(Rear View)
J8
SIROCCO
J10 FAN
DYNAMIC J4
BLACK J3
J9 EXHAUST THERMAL
SMOOTH FAN J5 SENSOR
PICTURE DMD
FAN
CD
DMD FAN LAMP
DOOR
J12 SWITCH
DVI LAMP
CARTRIDGE
PE2
POWER
BALLAST
OPTICAL DUCT CJ1

CJ3
ENGINE ASSEMBLY BALLAST
LAMP
POWER
CONTROL
PWB-BALLAST REPLACEMENT
Note: To remove the PWB-Ballast, it is not necessary to remove the Engine or Lamp Cartridge.
1) Release the Latch to lift the PWB-BALLAST from the mounting bracket.
2) Slide the PWB-Ballast out of the Engine Assembly.
3) Disconnect connectors CJ1, CJ3 and CJ4, the HV Lamp connector .
4) To reinstall, first connect the connectors.Then slide the PWB under the Retaining Hooks. Then press the
rear edge of the PWB down onto the guide pins to engage the latch.
RETAINING
HOOKS CJ4
(HV To Lamp)
CJ3
CJ1
LATCH
Page 10
WD-65837 / WD-73837 / WD-82837
OPTICAL ENGINE REPLACEMENT
CJ1 CJ3
BALLAST LAMP
OPTICAL CD POWER CONTROL
LAMP
ENGINE DOOR
J12 SWITCH
DVI LAMP
CARTRIDGE
PE2
POWER
BALLAST
OPTICAL ENGINE ASSEMBLY REMOVAL

1) Remove 3 screws (A) from the Optical Engine.
2) Disconnect all cables to the Optical Engine Assembly.
3) Slide the Optical Engine assembly out of the cabinet.
UPPER
DUCT ASSEMBLY REMOVAL DUCT
Upper Duct Assembly Removal Procedure
1) Loosen two screws (A) and remove the Lamp Cartridge.
2) Disconnect the Exhaust and Sirocco Fan Connectors (J4
and J8) from the back of the Engine and loosen the wiring
harnesses from the looms, refer to previous page for
connector locations.
3) Remove screw (B) from the top of the upper duct and
release the latches shown in Figure 2.
LAMP
4) Remove the Upper Duct assembly from the Optical
CARTRIDGE
Engine.
BALLAST
LOWER
DUCT
Figure 1: Duct Assembly (Rear View)

Page 11
WD-65837 / WD-73837 / WD-82837
OPTICAL ENGINE REPLACEMENT (Continued)

Latch
Latches
Latch
Figure 2: Duct Assembly (Top View)

DUCT INTERIOR COMPONENTS
1) Figure 3 shows the Duct Interior Components.
2) The Upper Duct must be removed to replace the Lamp Door Switch PWB, Sirocco Fan, Exhaust Fan and
Thermal Sensor (1 screw).
3) When replacing the Engine, transfer the Duct Interior Components from old Engine to the new Engine.
Note: There are three Exhaust Fan Holders, one on the top and two on the bottom of the Exhaust Fan.
Note: The Exhaust Fan must be installed so the Label is facing inside the Duct.
Note: The Sirocco Fan must be installed so the Label is facing upwith the Flanges aligned onto the Guide Pins.
FLANGES Align
Onto GUIDE PINS EXHAUST FAN
HOLDERS (3)
(1 Top - 2 Bottom)
SIROCCO FAN
(Label Facing Up)
EXHAUST
THERMAL FAN
SENSOR
(Behind Lamp Housing)
(Label Facing Inside)
PWB
LAMP DOOR
SWITCH
Figure 3: Lower Duct (Top View)

Page 12
WD-65837 / WD-73837 / WD-82837
OPTICAL ENGINE REPLACEMENT (Continued)

UPPER
DUCT
OPTICAL
ENGINE C
LOWER
DUCT
Figure 4: Lower Duct Rear Mounting Screw
Figure 5: Lower Duct Front Mounting Screw
LOWER DUCT REMOVAL

1) Remove Upper Duct, Fans, Fan Holders, Thermal Sensor and Lamp Cartridge. See previous page.
2) Remove the 2 screws (C) one in front and one in the rear of the lower duct, refer to
Figures 4 and 5.
3) Carefully remove the lower duct from the Engine.
ENGINE Replacement (Reverse the Removal Procedure)

1) Install Duct Assembly on the new Engine.
2) Remove the Protective Lens Cover from the face of the Lens and place it on the old Engine.
3) Install the Engine Assembly in the cabinet.
4) After a new Engine is installed, perform the “Restore Index Delay” and “Save Engine and Geometry Setting
to Backup” procedures as described in the DataTransfer section of the ServiceAdjustments.
5) If needed. perform the Horizontal and Vertical Centering Adjustment and Manual GeometryAlignment
described in Service Adjustments.
Page 13
WD-65837 / WD-73837 / WD-82837
COLOR WHEEL REPLACEMENT
SYMPTOMS
• Noise (Bad Motor Bearing)
• Solarized Picture NOTE: Before replacing the Color Wheel, check the Index Delay
Adjustment.
COLOR WHEEL REPLACEMENT PROCEDURE

CAUTION: This procedure should be performed in a dust free environment.
Any dust entering into the color wheel chamber can cause abnormalities in the picture.
1) Remove Engine Assembly and cover the projection lens to protect it from scratches.
2) Remove the TOP DUCT.
3) Remove the 2 screws (A) shown inFigure 1.
4) Disconnect the 2 connectors J6 & J7 shown inFigure 1.
5) Lift the top cover off of the color wheel chamber
.
A
COLOR WHEEL
COVER
J6 J7
Figure 1: Color Wheel Cover and Connectors

B
6) Remove 3 screws (B) shown inFigure 2.

7) Use the metal Handle to lift the Color Wheel from the chamber.
8) For installation, reverse the procedure above.
CAUTION: Avoid touching or scratching the Color Wheel.
NOTE: Do not twist the ribbon cable to J6 (the shiny silver
contacts must be facing up).
9) After re-assembly, perform the Index DelayAdjustment de- COLOR
scribed in the Service Adjustments section. WHEEL
HANDLE
10) Pack the original color wheel the same way the replacement
part was sent to you to prevent damage in return shipping.
Figure 2: Color Wheel

Page 14
WD-65837 / WD-73837 / WD-82837
PROJECTION LENS REPLACEMENT
PROJECTION LENS REPLACEMENT PROCEDURE

CAUTION: Any dust or fingerprints in the optics can cause abnormalities in the picture.
This procedure should be performed in a dust free environment.
Wear lint free cotton or rubber gloves while performing this procedure.
1) Remove Engine Assembly.

2) Remove screws (A) and rotate the Lens Collar off the Lens in the direction indicated while carefully releasing
the foam adhesive from the Lens
COLLAR
3) Remove screws (B) from the Lens Mask and slide the mask off in the direction indicated.
4) Lift out the Projection Lens.
5) Install the replacement lens so the key is oriented towards the top as shown. For reassembly
, reverse the
disassembly procedure. Use thread locker to secure screws (B).
KEY
B
LENS
MASK LENS
ve
Remo
Page 15
WD-65837 / WD-73837 / WD-82837
SCREEN REPLACEMENT 60”, 65” & 73” Models

Screen Assembly Removal and Replacement
1) Open the front control panel door. (V41+ Only) Pull away Speaker Covers followed by Center Escutcheon.
2) Remove three screws (A) (two screws WD-73837).
3) Remove screws (B) around the rear edge of the screen betzel.
NOTE: Leave one screw secure at the top. Then support the assembly to prevent it from falling
while removing the remaining screw.
4) During re-assembly replace screws in their original locations.
V41+
SPEAKER COVERS
(ORNAMENT LEFT & RIGHT)
CENTER ESCUTCHEON
(ORNAMENT CENTER)
A DOOR
B
B B
60 INCH
B B
B B
65 INCH 73 INCH
B B
B B
B B B B
Page 16
WD-65837 / WD-73837 / WD-82837
Screen Removal From the Bezel-Front

1) Remove screws (A) and remove the top, bottom and side rails.
2) Lift the Fresnel Lens and Lenticular screen from the Bezel-Front.
3) During re-assembly replace screws in their original locations.
A 60 & 65 INCH A
(Rear View)
A 73 INCH
(Rear View)
Page 17
WD-65837 / WD-73837 / WD-82837
SCREEN REPLACEMENT 60”, 65” & 73” Models (continued)

CAUTION: Wear gloves when handling the Lenticular Screen and Fresnel Lens.
This prevents cuts and finger prints. Do not place Fresnel Lens in the sun.
This may cause fire and heat related injuries.
Lenticular Screen and Fresnel Lens Removal
1) After removing the top, bottom and side HOLDER-SCREEN rails and their cushions from the Bezel, lift the
screens as a single unit from the frame.
2) Separate the Lenticular Screen and Fresnel Lens.
Note: When separating the Lenticular Screen from the Fresnel Lens, use caution
while prying the Screen and Lens apart. Use a slot type screw driver
, and
remove the pressure sensitive double sided tape.
Lenticular Screen and Fresnel Lens Replacement
1) Apply LENS-TAPE along the rear top edge of the Lenticular Screen.
2) Place the Fresnel Lens on top of the Lenticular Screen, and apply pressure along the top edge.
3) Place the screens in the screen frame and reinstall the cushions, top, bottom and side rails.
NOTE: The Lenticular Screen label must face the front and the Fresnel Lens label face the rear.
4) Reverse the Screen Removal Procedure and insert the screens in the Bezel.
SCREEN
LENTICULAR
LENS-TAPE
LENS
FRESNEL BEZEL FRONT
HOLDER-SCREEN-T
SPACER-SCREEN-T
COVER-HOLDER-T
LABEL
LABEL
SPACER-SCREEN-S
HOLDER-SCREEN-B HOLDER-SCREEN-S
SPACER-SCREEN-B
Page 18
WD-65837 / WD-73837 / WD-82837
SCREEN REPLACEMENT 82” Models

Front Cover and Pedestal Removal
1) Remove screws (A) around the bottom rear edge.
2) Open the front control panel door and remove screws (B).
3) Lift the Pedestal and Front Cover away from the front.
A A FRONT B B PEDESTAL
COVER
Screen Assembly Removal

1) Remove screws (C) from the bottom front of the screen assembly..
2) Remove screws (D) from the top rear edge of the screen bezel.
NOTE: Leave one screw secure at the top. Then support the assembly to prevent it from falling
while
removing the remaining screw.
D D D
Page 19
WD-65837 / WD-73837 / WD-82837
SCREEN REPLACEMENT 82” Models (continued)
CAUTION: Wear gloves when handling the Lenticular Screen and Fresnel Lens.
This prevents cuts and finger prints. Do not place Fresnel Lens in the sun.
This may cause fire and heat related injuries.
Lenticular Screen and Fresnel Lens Removal

1) Remove four screws (A) in all four corners of the Screen Bezel.
2) Remove the Screen Bezel components from the Screen/LensAssembly.
A X4
CORNER-S-T SCREEN/LENS
ASSEMBLY
COVER-HOLDER-T
CORNER-CAP CORNER-S-T
TOP-L
CORNER-CAP
TOP-R
HOLDER-SCREEN
S-L
FRONT
HOLDER-SCREEN
S-R
LABEL
CORNER
B-L
CORNER
HOLDER-SCREEN-B B-R
Page 20
WD-65837 / WD-73837 / WD-82837
SCREEN REPLACEMENT 82” Models (continued)
Lenticular Screen and Fresnel Lens Disassembly

1) Remove the HOLDER-SCREEN from the top, bottom and sides.
2) Separate the Lenticular Screen and Fresnel Lens.
HOLDER-SCREEN
LENTICULAR LENS
SCREEN LENTICULAR
SCREEN
FRESNEL
FRONT
HOLDER-SCREEN LENS
(TOP/BOTTOM)(SIDES)
Label Position
(Facing Outside)
Lenticular Screen and Fresnel Lens Replacement

1) Place the Fresnel Lens on top of the Lenticular Screen with the labels facing outside as shown.
2) Install the HOLDER-SCREEN, top, bottom and sides as shown above.
3) Reverse the disassembly procedure to reassemble and install the screen frame assembly .
NOTE: The Lenticular Screen must face the front and the Fresnel Lens must face the rear .
Page 21
WD-65837 / WD-73837 / WD-82837
MIRROR REPLACEMENT
MIRROR REPLACEMENT - 60”, 65” & 73” Models

1) To access the Mirror for replacement, remove the ScreenAssembly (See Screen Assembly Removal).
2) The Mirror slides down into the Left, Right and Bottom Brackets inside the cabinet.
3) For 73” models, a Top Bracket is installed.
3) See the Mirror Parts section for instructions on preparing a replacement mirror
.
TOP BRACKET
(73" Models)
SUPPORT
BRACKETS
MIRROR REPLACEMENT - 82” Models

1) To access the Mirror for replacement, remove screws (A) and lif t away the Mirror Cover.
2) The Mirror rests in place below the Mirror Cover.
3) See the Mirror Parts section for instructions on preparing a replacement mirror.
A MIRROR
(Below Cover)
Page 22
WD-65837 / WD-73837 / WD-82837
SPEAKER REPLACEMENT
1) Remove the Screen Assembly to access the speakers.
2) Remove screws (A) and remove the Speaker Assembly from the cabinet.
3) Disconnect the leads to the speaker.
4) Remove screws (B) to remove the speaker from the speaker cover
.
5) Reverse the procedure to install a replacement speaker.
SPEAKER
SPEAKER
COVER
B
CUSHIONS
SPEAKER
ASSEMBLY
CUSHIONS
PWB-SBL REPLACEMENT
V41+ Models Only
1) Remove the Screen Assembly.
2) Remove screws (A) to remove the PWB-SBLassembly.
3) Disconnect the electrical connector.
3) Release the latches to remove the PWB-SBLfrom the Holder.
4) Reverse the procedure to install a replacement PWB-SBL.
V41+ SBL
ASSEMBLY
HOLDER
A PWB-SBL
Page 23
WD-65837 / WD-73837 / WD-82837
REMOTE CONTROL
REMOTE CONTROL USE FOR SERVICE

Many service functions and adjustments are accessed using the Remote Control.
The V41 uses a new version remote. Service functions and adjustments can be performed with either the old or new
versions. However, several buttons have different names or labels.
The remote buttons associated with service that have been changed are shown below with the old buttons’ name in
parenthesis. For full remote instructions, refer to the Owner’s Guide.
NEW BUTTON NAME
(OLD BUTTON NAME)
ACTIVITY BACK
(INPUT or DEVICE) (EXIT)
PAGE UP
(AUDIO)
LAST
(QV)
PAGE DOWN
(VIDEO)
Page 24
WD-65837 / WD-73837 / WD-82837
OPTION MENU
OPTION MENU
1. Press the <MENU> button on the remote control.
2. Press the buttons <2-4-7-0>. The screen will display the Option Menu.
Option Menu
<MENU><2-4-7-0>
Initialize
Power Restore OFF
Production Mode OFF
Digital Signal Strength <1~9>
NetCommand Software Vxx xxx.xx
Total hours of use 0
DIGITAL SIGNAL STRENGTH

1. Tune to a Digital Channel.
2. From the Option Menu, scroll down and highlight “Digit
al Signal Strength.”
3. Press <ENTER>. The screen will display the Digital Signal Strength Menu.
Digital Signal Strength Menu

"Digital Signal Strength" <ENTER>
Tuner
Frequency(MHz) 749
Signal Level <1~9>
Modulation 8VSB Air
Carrier Lock Locked
SNR 29.09
Correctable errors 0
Un Correct able errors 0
SNR Recommended Levels:

8VSB = 16 to 33
64 QAM = 22 to 35
256 QAM = 27 to 38
Page 25
WD-65837 / WD-73837 / WD-82837
RESET / INITIALIZATION
SERVICE TIP:
Many customer generated symptoms, intermittent symptoms or no symptom found can be resolved by using the various
Reset and Initialization options. Before visiting the customer’s home ask the customer st1 perform a System Reset by
pressing the <POWER> button on the front panel and holding it for 8 seconds. If this does not resolve the issue,
they can perform an A/V Reset by pressing the <ACTIVITY> + <VOL e> buttons on the front panel at the same time
and holding for 10 seconds. Then, if necessary,perform a user levelInitialization by pressing <MENU><1-2-
3><ENTER> with the remote. The customer should be made aware when settings and/or options will be reset. For
more information, see the chart below.
Reset / Initialization Guide

Reset Name When to use How to use Resulting Action
Remote Returns the remote control TV 1) Set the s lide switch to TV Once the valid code has
Control TV layer to normal operation. 2) position. been entered and
Layer Res et 2) Press and hold the <POWER> button until it confirmed, the remote
3) flashes twice then releas e the button. contrrol has been reset.
3) Enter the code <0-0-9-3-5>.
Remote Returns the volume and mute 1) (1) Set the slide switch to TV position. The remote will now
Control TV functions of the remote control to 2) (2) Press and hold the <POWER> button until it operate the TV's volume
Volume/Mute TV volume and mute for TV, 2) flashes twice then releas e the button. and mute when the
functions Cable/Sat, VCR and DVD layers 3) (3) Enter the code <9-9-3>< + >. slide s witch is in the TV,
after the Audio Lock for AV CABLE/SAT, VCR or
Receiver feature has been used. DVD positions.
A/V Memory When the audio and or video MENU --> Audio/Video--> AV Reset All Audio and Video
Reset, by s ettings for a single input settings for the
individual s eems to be incorrect. individual input are
input reset except for the
Listen To, Language,
Balance and Closed
Caption settings.
A/V Reset, all To reset audio and video While viewing the TV, press the front panel buttons All Audio and Video
inputs e
adjustments for all inputs to the <ACTIVITY> + <VOL > at the same time and hold settings are reset to the
original factory settings. for 10 seconds. factory default settings.
No other menu options
are changed.
System To reset the TV when it does not Press the <POWER> button on the front panel and TV Micro Re-boots.
Reset turn on or off, does not respond hold it for 8 seconds. Note: The changes
to the remote control, front panel made during the current
buttons or has other unusual TV-On period may be
s ymptoms. lost. All other previous
user settings are not
lost.
Initialize User To reset all customer settings Press <MENU><1-2-3><ENTER> All customer menu
Level except V-Chip options and A/V settings
except V-Chip are reset
to factory default.
Initialize - To reset all customer settings <MENU><2-4-7-0>. Highlight INITIALIZE and press All customer menu
Service Level <ENTER> options and A/V settings
are reset to factory
default.
V-Chip If V-Chip password is not known Press < >+<9> at the same time. Password will be
Password bypassed. If in the V-
Bypass Chip menu, enter a new
password.
Unlock Front To unlock the front panel if it has Press and hold the front panel <ACTIVITY> button Front Panel becomes
Panel been locked in the V-Chip Menu. for 8 seconds. operational. Other V-
Chip settings not
changed. Note: Cannot
be performed while in
the Low Power mode
and the set is Off.
Page 26
WD-65837 / WD-73837 / WD-82837
RESET / INITIALIZATION (Continued)

INITIAL SETTINGS
Audio/Vide o Se tup Me nu
Settings Language (idioma) English
Video Scan
Picture M ode Brilliant Ant1 Air --
Brilliant Contrast 100% Ant1 Cable --
Brilliant Brightness 50% Start
Color 50% Edit
Tint 50% Channel in M em ory All Added
Sharpness 50% Name --
Brilliant Color Temp. High FAV1 ~ FAV6 unchecked
Deep Field Imager (V41+) On Lock Unlock
Video Noise (Off-Low-M id-High) Medium Clock
Audio (A/V Rec eiver) Settings M anual
Speakers 50% Time 12:00PM
Bass 50% Date 1/01/08
Treble 50% Time Zone Eastern
Balance Off Daylight Savings Applies
Sound Mode --- Timer
Listen To (Analog only) Normal Timer Off
Language (Digital only) English Day Daily
Level Sound On Time 12:00PM
Global Medium Input ANT-1
Video Noise(High-M ed-Low-Off) Medium Channel 2
Video Mute Auto Energy
Audio only screen saver On Lam p Mode Standard
F ilm Mode Auto 3D Mode Gray out
Test Picture --- Inputs Me nu Standard
B lue Glow (V41+ only) On if TV On Name
3D Mode Gray out Ant-1 On
Ca ptions Me nu Input-1 Gray out
Closed Captions Input-2 Gray out
Analog Captions On if Mute Input-3 (Front) Gray out
Background Gray Comp-1 Gray out
Digital Captions On if Mute Comp-2 Gray out
Digital Settings Comp-3 (Front) Gray out
Font Default HDMI-1 Gray out
Font Size Large HDMI-2 Gray out
Font Color W hite HDMI-3 Gray out
Font Opacity Translucent HDMI-4 (Side) (V41+) Gray out
Background Color Black Order Gray out
Background Opacity Translucent Learn (V41+) Gray out
Pa re nta l Lock M e nu A/V Receiver (V41+ ) Gray out
Lock Off Learn Gray out
TV Rating Gray until On Learn/Name Ant-1
M ovie Rating Gray until On Ass ign Input 1 --(Gray out for Ant)
Time Ass ign Input 2 Gray out until auto
Lock by Time Off Ass ign Input 3 sensing
Lock Tim e 12:00PM Ass ign Input 4 --
Unlock Time 12:00PM Form a t
Front Panel Ant-1 (HD Digital) Standard
Front Button Lock Off Input-1, 2, 3 Stretch
TV Volum e 30 HDMI-1, 2, 3, 4 (Video or PC) Standard
USB Photo --
Page 27
WD-65837 / WD-73837 / WD-82837
RESET / INITIALIZATION (Continued)
A. A/V Memory
Each of the external inputs has it’s own Audio/Video Memory. A change in an A/V setting at a specific input is
stored in memory for that specific input.
B. A/V Reset
1. Press the front panel <ACTIVITY> and <VOL e> buttons at the same time to initialize the A/V Settings
for all Inputs.
2. The AV Reset in the user’s menu initializes only the A/V Memory for the currently selected input.
A/V Initial Settings
HDMI HDMI HDMI USB
A/V Memory Ant Input Comp
(Video) (PC) (PC 3D) (JPEG)
Picture Mode Brilliant Brilliant Brilliant Brilliant Bright Bright Brilliant
Contrast MAX MAX MAX MAX MAX MAX MAX
Brightness Center Center Center Center Center Center Center
Color Center Center Center Center Center Center Center
Tint Center Center Center Center Center Center Center
Sharpness Center Center Center Center Center Center Center
Color Temp. High High High High High High High
Perfect Color Center Center Center Center Center Center Center
Perfect Tint
Center Center Center Center Center Center Center
(V41+)
Deep Field Imager
On On On On n/a n/a On
(V41+)
Video Noise Medium Medium Medium Medium Medium Medium Medium
Film Mode Auto Auto Auto Auto n/a n/a n/a
SharpEdge (V41+) On On On On On Off On
Bass Center Center Center Center Center Center Center
Treble Center Center Center Center Center Center Center
Balance Center Center Center Center Center Center Center
Sound mode Normal Normal Normal Normal Normal Normal n/a
Listed To Stereo n/a n/a n/a n/a n/a n/a
Level Sound On On On n/a n/a n/a n/a
Language
English n/a n/a n/a n/a n/a n/a
(Digital only)
Vertical Position n/a n/a n/a n/a Center Center n/a
Horizontal Position n/a n/a n/a n/a Center Center n/a
Page 28
WD-65837 / WD-73837 / WD-82837
LED INDICATIONS AND SELF DIAGNOSTICS

The front panel Status LED provides an indication of the set’s operation and the possible cause of a malfunction.
NORMAL INDICATIONS
STATUS LED Indication Condition
Off Off (standby)
Green Power On
Slow Blink Green Power Off with Timer Set
Fast Blink Green (80 seconds) > Off Power Off (Cooling fan still working, 80 sec)
ABNORMAL INDICATIONS (For details perform Self Diagnostics procedure.)

STATUS LED Indication Condition
Red Lamp Failure
Yellow TV Too Hot
Slow Blink Red TV May Require Service
Slow Blink Yellow Lamp Door Open or No Lamp Installed
- VOL + - CH + ACTIVITY STATUS POWER
ENTER
Front Panel (Location and Appearance Differs by Model)
SELF DIAGNOSTICS
To activate, press the front panel <ACTIVITY> + <CH T> buttons at the same time and hold for 5 seconds.
The STATUS LED will then flash denoting a two digit code.
• The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
• The flashing then pauses for approximately 1/2 second.
• The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
• The Error Code is repeated a total of 5 times.
Example: If the Error Code is “23”, the LED will flash two times, pause, and then flash three times.
Note: The TV must be in “Shut Down” and the LED will probably be indicating an abnormal condition.
If the TV is switched Off, AC is removed, or a System Reset is performed, the code automatically
resets to “12” No Error. See the Error Code Log to retrieve a history of errors.
Note: Use the front panel buttons, not the remote control.
Note: If there is no response, the front panel may be locked by a V-Chip setting. To unlock, press and hold
<ACTIVITY> on the front panel for 5 seconds.
Page 29
WD-65837 / WD-73837 / WD-82837
ERROR CODES
Error Codes, descriiptions and the most likely cause of the error are listed below:
ERROR CODES
Code Description Most Likely Cause
12 No Error found
Communication loss, TV Micro - Engine (3.3V-ENG-SDA & SCL) Loss of 12V from PWB-POWER to Engine
17 (Loose PE or PE2 connector).
Engine Failure
Engine will not accept data (ASIC-READY signal from Engine is not
18 Engine Failure
detected).
32 Lamp cover is open. Lamp Cover Switch (Loose CD connector)
Lamp turns Off while the TV is playing.
34 Lamp failure Lamp Cartridge Failure
(Lamp Enable signal from engine is lost)
36 Exhaust Fan failed. (Loose J4 connector)
37 Engine (DMD) fan failed. (Loose J5 connector)
38 Lamp temperature abnormally high. Poor Air Circulation (Loose J3 connector)
39 DMD temperature abnormally high. Poor Air Circulation
42 Sirocco fan failed (Lamp fan). (Loose J8 connector)
Check for disconnected DVI cable between PWB-MAIN and Engine.
44 DVI Cable unplugged
(Engine pulls DVI pin 14 Low)
48 PON-SHORT 3.3V or 5V switched supply short PWB-MAIN Failure
Loss of 340V from PWB-POWER to Ballast
(Loose PL or CJ1 connector); Loss of
57 Ballast communication problem (ballast to chassis) communications between PWB-MAIN and
Ballast (Loose FB or CJ3 connector).
Ballast Failure
61 No LAMP-EN output from the engine to the ballast Bad Color Wheel (Loose J6 or J7 connector)
Lamp did not turn on at P-ON sequence (Loose CJ4 connector)
(No Lamp inserted) No Lamp Inserted.
66
(Disconnected cable between ballast and lamp) HV connection or lead wire to lamp.
(Lamp-Enable goes to PWB-MAIN but not to Ballast) Lamp Cartridge Failure
Code 34 - Lamp Enable is generated to activate the Lamp

Code 57 - Lamp Enable is generated during P-ON sequence, but no Lamplit signal is received from the Ballast.
Code 61 - No Lamp Enable is received at the PWB-MAIN and Ballast.
Code 66 - Lamp enable is received at the PWB-MAIN but not at the Ballast.
ERROR CODE LOG
The Error Code Log may be helpful to retrieve the code for an error that occurred in the past.
To access the Error Code Log: Press <MENU> <3-5-6-4>
Error Code Definitions ***** PAGE (001/001) *****
• PAGE - Current page number
CURRENT TIME: 01455 HOURS
• CURRENT TIME - total hours of operational use.
• LAMP TIME - usage hours when the error LAMP TIME CODE STATUS
occurred. 00413 HRS 57 HAPPENED
• CODE - the specific Error Code that occurred. 00716 HRS 17 HAPPENED Press Up t o Previo us Page
• STATUS: HAPPENED - Indicates an error was 00905 HRS 66 HAPPENED Press Do w n t o Next Page
recorded. Press Right t o Top Page
Press Left t o Last Page
Press <CANCEL> to erase the Log. Press CANCEL t o Init ialize
Note: Lamp Cover errors (32) are not recorded. Press M ENU t o Exit
NOTE: The Error Code Log is intended as a reference tool and is not meant to be used as a final determination of a
defective part.
Page 30
WD-65837 / WD-73837 / WD-82837
SERVICE ADJUSTMENTS
There are 4 ServiceAdjustments:
Electrical Adjustments (there are no mechanical adjustments)
• Horizontal and Vertical Centering Adjustment
• Index Delay Adjustment
• Geometry Alignment
• Data Transfer Functions
Test Equipment and Test Patterns

• Remote Control
• Internally generated Test Patterns
• No external test equipment or pattern generators are required.
SERVICE MODE
The Service Mode is used for all service adjustments.
Service adjustments may only be performed using the remote control.
1. Activating the Service Mode

1. Press the <MENU> button on a remote control. (The “MENU” display will appear.)
2. Press the buttons <2-4-5-7>. (The Service Mode On Screen Display will appear
.)
If no display appears, press <BACK> and repeat steps 1 and 2.
Service Mode <MENU> <2-4-5-7>
SE RVICE
Function TVM
Adjustment 1. HVPOS -3 Data (HPOS)
4 Data (VPOS)
2. Test Pattern Activation

When in the Service Mode, press Play <Z> to activate the internal test patterns (no indication will be
displayed initially). Use Fast Forward <XX> and Rewind <WW> to select a specific pattern.
3. Adjustment Function
Service adjustments are performed in the TVM mode. No otherAdjustment Functions are available.
4. Adjustment Selection
Use the Page Down < > button to select a specific electrical adjustment, i.e. “1.HVPOS.”
5. Adjusting Data
After selecting an adjustment item, use the Navigation <bcef> buttons to perform the adjustment.
6. Saving Data
Press <ENTER> to save the adjustment data. The menu display will turn red for approximately one second.
Note: If the circuit adjustment mode is terminatedwithout pressing <ENTER>, changes in adjustment data
are not saved.
7. Data Transfer & Geometry Menu

While in the Service Mode, press the <0> button to activate the Data Transfer & Geometry Menu.
Page 31
WD-65837 / WD-73837 / WD-82837
Horizontal and Vertical Position Adjustment

1. Enter the Service Mode <MENU><2-4-5-7> .
2. Select the Geometry Test Pattern shown below <Z><WW> x2.
3. If necessary, select the adjustment, “1.HVPOS” < >.
SERVICE Adjustment
TVM Data (HPOS)
1.HVPOS -3 Data (VPOS)

4
4. After selecting the HVPOS adjustment item, use the Navigation <TSWX> buttons to center the display.
• If a Up/Down <TS> button is pressed, the vertical position and VPOS adjustment data changes.
• If a Right/Left <WX>button is pressed, the horizontal position and HPOS adjustment data changes.
5. Press <ENTER> to save the adjustment data.
Index Delay Adjustment

1. Enter the Service Mode<MENU><2-4-5-7> .
2. Select the Ramp Pattern shown below<Z><WW> x3.
3. Select the adjustment, “60.IDL” < >.
SERVICE Adjustment
TVM Data
60.IDL 35
4. After selecting the IDL adjustment item, use the Navigation <TS> buttons to adjust the Ramp Pattern color
bars so they are smooth and solid. HINT: The data value is typically in the mid 30’s.
5. Press <ENTER> to save the adjustment data.
Page 32
WD-65837 / WD-73837 / WD-82837
Manual Geometry Alignment

1. Activate the Service Mode <MENU><2-4-5-7>. From the Service Menu, press the <0> button. The Data
Transfer & Geometry Menu will appear.
2. Use the <TS> buttons to select “MANUALGEOMETRY ALIGNMENT” and press <ENTER>.
The Manual Keystone GeometryAlignment Pattern will appear. See below.
Note: To remove all geometry correction, while the GeometryAlignment Pattern is displayed, press <1> then
<ENTER>. This will null all correction data. Then re-enter the Manual GeometryAlignment mode by repeating
step 2.
Note: To restore the original factory correction data, select “RESTORE GEOMETRY DATA FROM BACKUP” and
press <ENTER>.
Data Transfer & Geometry Menu <MENU><2-4-5-7><0>

RESTORE ENGINE DATA FROM BACKUP
RESTORE GEOMETRY DATA FROM BACKUP
MANUAL GEOMETRY ALIGNMENT
RESTORE INDEX DELAY
SAVE ENGINE AND GEOMETRY SETTING TO BACKUP
Warning - Only use "SAVE ENGINE AND GEOMETRY SETTING TO BACKUP"
after Optical Engine replacement.
Cursor +
+
Adjustment Points
(16 Total)
Align Cursor + Flush With Bezel Edge
Phase 1 - 16 Point Geometry Alignment

1. 16 Adjustment Points are indicated by white dots around the edge of the raster. The adjustment position is
indicated by a + cursor.
2. Starting from the upper left corner, use the <WTSX> buttons to align the + at each point in a straight line,
flush with the bezel as a reference. See example above.
Note: Only the cursor will move. The Geometry Pattern will not change.
3. After adjusting each point, use the <XX> button to shift the cursor to the next point clockwise and repeat
until all 16 points have been adjusted.
4. After all 16 points are adjusted and the cursor is returned to the original starting point, press <ENTER>.
Correction will be automatically calculated and saved and the Manual GeometryAlignment will be terminated.
5. Press <ENTER> to re-activate the Manual GeometryAlignment. The geometry pattern will appear with the
corrections applied.
Page 33
WD-65837 / WD-73837 / WD-82837
Phase 2 - 4:3 and 16:9 Alignment

1. With the Manual Geometry Alignment activated, press < > to enter the 4:3Alignment Mode. The pattern
below will be displayed.
Note: Pressing < > will toggle between the 4:3,16:9 (top & bottom) and 16 Point GeometryAlignment modes.
2. In the 4:3 Alignment Mode, continuing to press <XX> will cause the geometry pattern to be displayed with
11 different preset amounts of correction. Continue pressing <WW> or <XX> to cycle through the 11 patterns
until you find the one with the straightest Blue 4:3 Lines. It may help to count the patterns as you cycle
through them. When you find the pattern with the straightest Blue 4:3 Lines, press < >.The Top 16:9
Alignment Mode will then be activated as indicated by theTop Red 16:9 Line displayed in the pattern.
4:3 MOD E
Select Straightest Blue Lines
3. In the Top 16:9 Alignment Mode, continuing to press <XX> will cause the geometry pattern to be displayed
with 15 different preset amounts of correction to the T
op Red 16:9 Line. Continue pressing <WW> or <XX>
to cycle through the 15 patterns until you find the one with the straightestTop Red 16:9 Line. Again, count
the patterns as you cycle through them. When you find the pattern with the straightest line, press < >.
The Bottom 16:9 Alignment Mode will then be activated as indicated by the Bottom Red 16:9 Line displayed
in the pattern.
4:3 MOD E
Select Straightest Red Line (Top)
Page 34
WD-65837 / WD-73837 / WD-82837
4. In the Bottom 16:9 Alignment Mode, continuing to press <XX> will cause the geometry pattern to be
displayed with 10 different preset amounts of correction to the Bottom Red 16:9 Line. Continue pressing
<WW> or <XX> to cycle through the 10 patterns until you find the one with the straightest Bottom Red
16:9 Line. Again, count the patterns as you cycle through them. When you find the pattern with the
straightest line, press <ENTER> to exit and save the 4:3 and 16:9 data.
5. Select the Geometry Test Pattern (See HVPOS). If Geometry is acceptable, press <BACK> to quit. To touch-
up the raster geometry, proceed.
4:3 MOD E
Select Straightest Red Line (Bottom)
Phase 3 - Geometry Touch-up Alignment

1. Enter the Manual GeometryAlignment mode.
2. Use the <WW> or <XX> button to shift the cursor to the point needing correction.
3. Use the <WTSX> buttons to indicate the direction and amount of correction necessary at the particular
point. Note: Only the cursor will move. The Geometry Pattern will not change.
4. Press the <INFO> button to apply the correction. The Geometry Pattern will now show the correction.
5. Repeat steps 2, 3 and 4 as needed.
6. Press <ENTER> to save your changes.The Manual Geometry Alignment will be terminated.
7. Press <BACK> to exit the alignment mode.
Page 35
WD-65837 / WD-73837 / WD-82837
Data Transfer
Service Data is duplicated and stored in separate EEPROMs in two locations.
• PWB-MAIN - Working data for TV operation
• OPTICAL ENGINE - Backup data
The Optical Engine also includes data for the Color Wheel Index Delay setting determined at the factory
.
Procedure:
1. Enter the Service Mode <MENU><2-4-5-7> Select the Data Transfer & Geometry Menu <0>
Data Transfer & Geometry Menu <MENU><2-4-5-7><0>

RESTORE ENGINE DATA FROM BACKUP
RESTORE GEOMETRY DATA FROM BACKUP
MANUAL GEOMETRY ALIGNMENT
RESTORE INDEX DELAY
SAVE ENGINE AND GEOMETRY SETTING TO BACKUP
BACKUP AND RESTORE ISF SETTINGS (V41+ & V41 s/w V41 011.01 and later only)
RED ONLY AND GREEN ONLY (V41+ & V41 s/w V4 1 011.01 and later only)
Warning - Only use "SAVE ENGINE AND GEOMETRY SETTING TO BACKUP"

after Optical Engine replacement.
Note: Besides MANUAL GEOMETRY ALIGNMENT, up to six data transfer choices are listed on screen.
• RESTORE ENGINE DATA FROM BACKUP - copies backup factory adjustments HVPOS, White
Balanceand Index Delay from the Optical Engine to the PWB-MAIN.
• RESTORE GEOMETRY DATA FROM BACKUP - copies backup factory Geometry Alignment data from
the Optical Engine to the PWB-MAIN.
• RESTORE INDEX DELAY - copies factory Index Delay Adjustment data from the Optical Engine to the
PWB-MAIN.
• SAVE ENGINE AND GEOMETRY SETTING TO BACKUP - copies all working data from the PWB-
MAIN into backup memory on the Optical Engine.
• BACKUP AND RESTORE ISF SETTINGS - (V41+ and V41 s/w V41 011.01 and later only) - allows the
ISF (ADV) video settings to be backed up and restored using an external USB memory device.
• RED ONLY AND GREEN ONLY - (V41+ and V41 s/w V41 011.01 and later only) - displays the video in
red or green only.
2. Use the <TS> buttons to select the item and press <ENTER>.
3. Follow on-screen instructions if given.
3. Press <MENU> to quit.
After Engine Replacement:

1. Restore Index Delay.
2. Save Engine and Geometry Setting to Backup
After PWB-MAIN Replacement:

1. Restore Engine Data From Backup
2. Restore Geometry Data From Backup.
3. Restore ISF Settings From Backup (Only if backup USB memory device is available).
Page 36
WD-65837 / WD-73837 / WD-82837
Using Lead Free Solder

The symbol shown below indicates Lead (Pb) Free • Poor wet-ability can cause solder balls.
solder was used during the construction of PWBs. • Higher temperatures can cause flux spattering.
Only Lead Free solder should be used when servic- • Soldering iron tip life is shortened.
ing these PWBs. • Dull finish solder joints (not shiny) can appear to be
a “cold” solder joint.
Solder must be compatible with that used by the
manufacturer. Leaded solder can not be used on In general a tip temperature of 700° F will usually provide
PWBs manufactured with Pb-free solder. The Mitsub- good results.
ishi standard for service requires the use of Tin-Silver-
Copper (Sn-96.5, Ag-3.0, Cu-0.5). It can be obtained
through the Parts Department.
Displays used to indicate Pb-free
Order part number: PB FREE SOLDER PCBs will be marked, indicating the level of Pb-free con-
struction. Table 1 defines the levels by phase and shows
Lead Free solder has a higher melting point, and does the different symbols that will be displayed on the PCB.
not “wet” as well as leaded solder. This means it does Additionally, a PCB constructed using Pb-free solder may
not adhere as readily to the solder iron tip, and the be simply marked LFS.
surface to be soldered. To counteract this, the flux
used is more corrosive. When possible, the indication will be placed close to the
part number that is screened onto the PCB (not the part
The following cautions must be taken when using Pb label). Figure 1 is an example of a PCB showing the
Free solder. display and its location.
• Higher temperatures can cause the PWB to
warp, detaching surface mount components.
• Higher temperatures may cause
Pb-Free Short Display (When the
thermal damage to components. Phase Definition Display area is too small)
• Higher temperatures can cause Phase-1 PCB's constructed using
plastics, such as connectors,
relays, LEDs electrolytic
Pb-free solder.
Pb Solder Pb S
capacitors, etc. to melt or warp.
• Higher temperatures can cause Phase-2 Solder, PCB surface
finishing and component
surface oxidation resulting in
poor solder spread-ability and
lead plating is Pb-free.
Components may have
Pb Joints Pb J
wet-ability. internal Pb.
• The flux is more corrosive. Phase-3 Solder, PCB surface
• The time required for a good
solder connection may take
finishing and components
are Pb-free. (100% Pb- Pb PCA Pb P
free)
longer.
Table 1: Pb-Free Phases and Symbols
Pb-Free
Display
Pb Solder
Figure 1: Pb-Free display on PWB

Page 37
WD-65837 / WD-73837 / WD-82837
CHIP PARTS REPLACEMENT

Some resistors, shorting jumpers (0 Ohm resistors),
ceramic capacitors, transistors and diodes are chip parts.
The following precautions should be taken when replacing
these parts.
Cautions:
1. Use a fine tipped, well insulated soldering iron
and tweezers.
2. Melt the solder and remove the chip parts
carefully so as not to tear the copper foil from
the printed circuit board.
3. Discard removed chips; do not reuse them.
4. Do not apply heat for more than 3 (three)
seconds to new chip parts.
5. Avoid using a rubbing stroke when soldering.
6. Take care not to scratch, or damage the chip
parts when soldering.
7. Supplementary cementing is not required.
Chip Parts Removal (Resistors, Capacitors, etc.)

1. Grasp the part with tweezers. Melt the solder
at both sides alternately, and remove one side
of the part with a twisting motion.
2. Melt the solder at the other side and remove
the part.
Page 38
WD-65837 / WD-73837 / WD-82837
REPLACEMENT PARTS
Parts Ordering
To expedite delivery of replacement parts orders, specify the following:
1. Model Number/Serial Number
2. Part Number and description
3. Quantity
Note: Unless complete information is supplied, delay in processing of orders will result.
Safety Critical Parts Designation
Safety Critical Components are indicated

123456789
123456789
in the Parts List by Bold Type and a icon, and in the
schematic diagrams by a red hatch 123456789
123456789
123456789 and a .
Parts Tolerance Codes
MARK B C D F G J K
Tolerance % ± 0.1 ± 0.25 ± 0.5 ±1 ±2 ±5 ± 10
MARK M N V X Z P Q
Tolerance % ± 20 ± 30 ± 10 + 40 + 80 + 100 + 30
-20 -20 -0 -10
MARK M N V X Z
Tolerance (pF) ± 0.1 ± 0.25 ± 0.5 ±1 ±2
Page 39
WD-65837 / WD-73837 / WD-82837
QUICK REFERENCE
ALL MODELS
PART PART NUMBER
La m p-Ca rtridge 915B403001
La m p Ba lla st 938P127010
Speaker 480P084020
Fan-Exhaust 299P335010
Fan-Scirocco (Lam p) 299P321010
Fan-Engine (DMD) 299P339010
Sensor-Temperature 299P337010
Module-Color-W heel 938P137010
PRINTED CIRCUIT BOARDS

MODEL PW B-MAIN PW B-POW ER PW B-LAMP-SW PW B-CONT PW B-LED PW B-RS232 PW B-PREAMP
W D-60737 934C328001 934C329001 934D059001 934D060001 934D057001 X 934D058001
W D-60C9 " " " " " X "
W D-65737 " " " " " X "
W D-65C9 " " " X "
W D-73737 " " " " " X "
W D-73C9 " " " " " X "
W D-82737 " " " 934D060002 X X "
W D-65837 934C328002 " " " X 934D062001 934D058002
W D-73837 " " " " X " "
W D-82837 " " " " X " "
OPTICAL EN GINE & MISC . PARTS

OPTICAL FRESNEL LENTICULAR PROJECTION
MODEL M IRROR KIT REMOTE
ENGINE LENS SCREEN LENS
W D-60737 938P158010 491P218010 491P217040 KIT-MIR V41 60" 491P 240010 290P175010
W D-60C9 " " " " " "
W D-65737 938P158020 491P218020 491P217050 KIT-MIR V41 65" " "
W D-65837 955B378003 " " " " "
W D-65C9 938P158020 " " " " "
W D-73737 938P158030 491P218030 491P217060 KIT-MIR V41 73" " "
W D-73C9 " " " " " "
W D-73837 955B378004 " " " " "
W D-82737 938P158040 491P232010 491P231010 KIT-MIR V41 82" " "
W D-82837 955B378005 " " " " "
Page 40
WD-65837 / WD-73837 / WD-82837
[#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-65C9,
(f) WD-73737, (g) WD-73837, (h) WD-73C9, (i) WD-82737, (j) WD-82837
Ref # Part # Part Name & Description [#] Ref # Part # Part Name & Description [#]
INTEGRATED CIRCUITS DIODES

D2A11 262P880080 DIODE-CHIP - MAZ8051GHL
IC1B01 271P171010 IC - MIC2040-1YMM D2A12 262P830010 D-CHIP - MC2850-T111-1
IC1B02 265P151010 VARISTOR - AVF16C225A000F405 D2A13 262P830010 D-CHIP - MC2850-T111-1
IC2A01 276P726010 IC-C-MOS - SiI9287CNU D2A21 262P880080 DIODE-CHIP - MAZ8051GHL
IC2A51 276P742020 IC-C-MOS - PST8428NR D2A22 262P830010 D-CHIP - MC2850-T111-1
IC3A00 276P733010 IC-C-MOS - YDA156-VZ D2A23 262P830010 D-CHIP - MC2850-T111-1
IC3C00 276P741010 IC-C-MOS - AK4420ETP D2A31 262P880080 DIODE-CHIP - MAZ8051GHL
IC4A01 276P742020 IC-C-MOS - PST8428NR D2A32 262P830010 D-CHIP - MC2850-T111-1
IC4A02 276P687010 IC-C-MOS - BCM3549LKFSB5G D2A33 262P830010 D-CHIP - MC2850-T111-1
IC4F01 276P744010 IC-C-MOS - NT5TU64M16DG-AC D2A41 262P880080 DIODE-CHIP - MAZ8051GHL dgj
IC4F02 271P033020 IC - LP2996LQNOPB D2A42 262P830010 D-CHIP - MC2850-T111-1 dgj
IC4F03 276P744010 IC-C-MOS - NT5TU64M16DG-AC D2A43 262P830010 D-CHIP - MC2850-T111-1 dgj
IC4G01 271P251040 IC - MM1662FHBE D2A52 262P830010 D-CHIP - MC2850-T111-1
IC4L01 276P485010 IC-C-MOS - SC16C652BIB48 D4A03 262P163010 D-CHIP - MALS068X0L
IC4L02 276P740010 IC-C-MOS - LC4064ZE-7TN48C D4A04 262P163010 D-CHIP - MALS068X0L
IC4L03 276P545090 IC-C-MOS - NAND01GW3B2CN6E-P D4A05 262P830010 D-CHIP - MC2850-T111-1
IC4L05 276P628010 IC-C-MOS - PL671-33-120SC-R D4A06 262P830010 D-CHIP - MC2850-T111-1
IC5A01 276P722010 IC-C-MOS - UPD808526F1-S11-MNJ-A D4A07 262P163010 D-CHIP - MALS068X0L
IC5A02 271P319010 IC - MM1701AHBE D4A08 262P163010 D-CHIP - MALS068X0L
IC5A03 271P319010 IC - MM1701AHBE D7A03 262P830010 D-CHIP - MC2850-T111-1
IC6C00 276P336010 IC-C-MOS - SiI7170CMHU D7A04 262P828020 D-CHIP - MC2836-T112-1
IC6C02 271P251020 IC - MM1663DHBE D8000 264P584020 DIODE-LE - SML1216W-C,D dgij
IC7A01 276P576010 IC-C-MOS - UPD78F1178GF(S)-GAT-AX D8200 264P584020 DIODE-LE - SML1216W-C,D abcefh
IC7A03 276P578020 IC-C-MOS - MM3376A33NRE D8300 262P828010 D-CHIP - MC2838-T112-1 dgj
IC7E01 276P519010 IC-C-MOS - 74HC132DB dgj D8301 268P100010 DIODE-PHOTO - SFH235FA dgj
IC8300 276P525010 IC-C-MOS - MAX4489ASA+T dgj D8701 262P855010 D-LE-CHIP - LB E6SG-S2U1-35-1 dgj
IC9010 267P324010 HIC - STR-W6754 D8702 262P855010 D-LE-CHIP - LB E6SG-S2U1-35-1 dgj
IC9020 271P142010 IC - RT9H301C D8703 262P855010 D-LE-CHIP - LB E6SG-S2U1-35-1 dgj
IC9030 271P315010 HIC - STR-A6159 D8704 262P855010 D-LE-CHIP - LB E6SG-S2U1-35-1 dgj
IC9031 271P142010 IC - RT9H301C D8705 262P855010 D-LE-CHIP - LB E6SG-S2U1-35-1 dgj
IC9A01 271P254010 IC - ISL6545ACBZ-TS2698 D8706 262P855010 D-LE-CHIP - LB E6SG-S2U1-35-1 dgj
IC9A04 276P578020 IC-C-MOS - MM3376A33NRE D9001 262P200010 DIODE - D6SB80-7001
IC9A06 271P321010 IC - PST8242NR D9005 262P170010 DIODE - SARS01
IC9A07 271P321010 IC - PST8242NR D9006 262P203070 DIODE - UF4007
IC9E01 275P989010 IC-C-MOS - MAX3223ECAP dgj D9008 262P201060 DIODE - 1N4006
IC9G80 271P171010 IC - MIC2040-1YMM D9009 262P201060 DIODE - 1N4006
D9010 262P201060 DIODE - 1N4006
D9011 262P201060 DIODE - 1N4006
D9012 264P045080 DIODE - 1S2076A/1S2471OM
TRANSISTORS D9013 262P084010 DIODE - 31DQ06
CHIP Type Transistors (Listed by Part No.) D9014 264P774020 DIODE - MTZJ4.7A,B,CQLF
D9018 264P045080 DIODE - 1S2076A/1S2471OM
D9019 264P045080 DIODE - 1S2076A/1S2471OM
D9020 264P045080 DIODE - 1S2076A/1S2471OM
Part No. Description
D9022 264P775080 DIODE - MTZJ6.2CQLF
261P842080 2SC3052-T112-1E;F
D9023 262P085010 DIODE - 11EFS2N-TA2B5
261P844010 R T1N436C-T112-1
D9024 262P085010 DIODE - 11EFS2N-TA2B5
261P845010 R T1P241C-T1112-1
D9026 262P208010 DIODE - FCHS10A12-15A
261P875010 FDS8984
D9031 262P210010 DIODE - 30PHA20-FC5
261P877010 FDC655BN
D9A01 262P852010 D-CHIP - BAT54S
261P878010 RT3Y97M-T111-1
D9A02 262P852010 D-CHIP - BAT54S
261P881010 2SB1424T100R
261P889010 ISA1235AC1-T112A-1E,1F
D9A06 262P828010 D-CHIP - MC2838-T112-1
D9A08 262P828010 D-CHIP - MC2838-T112-1
D9A09 262P900010 DIODE - FLZ3V9A T&R 2500/reel
PAGE 41
WD-65837 / WD-73837 / WD-82837
COILS L5F07 409P974010 CHIP BEADS - MMZ1608S601A

L6C00 409P974010 CHIP BEADS - MMZ1608S601A
L6C01 409P974010 CHIP BEADS - MMZ1608S601A
L1A02 409P975010 CHIP BEADS - MPZ2012S221A L6C02 409P974010 CHIP BEADS - MMZ1608S601A
L1A04 325C420070 COIL-CHIP - 10MH-K LOW-R L6C03 409P974010 CHIP BEADS - MMZ1608S601A
L1B01 409P975010 CHIP BEADS - MPZ2012S221A L6C04 409P974010 CHIP BEADS - MMZ1608S601A
L1B02 409P975010 CHIP BEADS - MPZ2012S221A L6C05 409P974010 CHIP BEADS - MMZ1608S601A
L1B03 409P979010 EMI-FILTER-CHIP - DLW21SN900SQ2L L6C06 409P974010 CHIP BEADS - MMZ1608S601A
L2A01 409P974010 CHIP BEADS - MMZ1608S601A L6C08 409P974010 CHIP BEADS - MMZ1608S601A
L2A92 409P975010 CHIP BEADS - MPZ2012S221A L6C14 409P975010 CHIP BEADS - MPZ2012S221A
L3A25 351P317010 COIL-CHOKE-CHIP - PLC-1055-220S L6C94 409P974010 CHIP BEADS - MMZ1608S601A
L3A28 351P317010 COIL-CHOKE-CHIP - PLC-1055-220S L7A01 409P974010 CHIP BEADS - MMZ1608S601A
L3A33 351P317010 COIL-CHOKE-CHIP - PLC-1055-220S L7A02 409P974010 CHIP BEADS - MMZ1608S601A
L3A36 351P317010 COIL-CHOKE-CHIP - PLC-1055-220S L7C02 409P974010 CHIP BEADS - MMZ1608S601A dgj
L3C12 409P974010 CHIP BEADS - MMZ1608S601A L7C03 409P974010 CHIP BEADS - MMZ1608S601A dgj
L4A01 325C505060 COIL-CHIP - MLF2012A2R7J L8300 409P975010 CHIP BEADS - MPZ2012S221A
L4A06 409P974010 CHIP BEADS - MMZ1608S601A L9001 351P351010 LINE-FILTER - SC22-05-70J
L4F01 409P974010 CHIP BEADS - MMZ1608S601A L9002 351P351010 LINE-FILTER - SC22-05-70J
L4F02 409P974010 CHIP BEADS - MMZ1608S601A L9005 321C141010 COIL-RF - 6.8MH-M
L4G01 409P975010 CHIP BEADS - MPZ2012S221A L9A01 409P975010 CHIP BEADS - MPZ2012S221A
L4G04 409P975010 CHIP BEADS - MPZ2012S221A L9A05 351P349010 COIL-CHOKE-CHIP - CDRH8D43NP-2R0NC
L4G06 409P975010 CHIP BEADS - MPZ2012S221A L9A07 351P349010 COIL-CHOKE-CHIP - CDRH8D43NP-2R0NC
L4G07 409P975010 CHIP BEADS - MPZ2012S221A L9A11 409P974010 CHIP BEADS - MMZ1608S601A
L4G08 409P975010 CHIP BEADS - MPZ2012S221A L9A12 409P974010 CHIP BEADS - MMZ1608S601A
L4G09 409P974010 CHIP BEADS - MMZ1608S601A L9A13 409P974010 CHIP BEADS - MMZ1608S601A
L4G12 409P974010 CHIP BEADS - MMZ1608S601A L9A16 409P975010 CHIP BEADS - MPZ2012S221A
L4G15 409P974010 CHIP BEADS - MMZ1608S601A L9A17 351P349010 COIL-CHOKE-CHIP - CDRH8D43NP-2R0NC
L4G17 409P974010 CHIP BEADS - MMZ1608S601A L9E03 325C411090 COIL-CHIP - 33MH-J dgj
L4G18 409P974010 CHIP BEADS - MMZ1608S601A L9G80 409P975010 CHIP BEADS - MPZ2012S221A
L4G19 409P974010 CHIP BEADS - MMZ1608S601A L9G81 409P974010 CHIP BEADS - MMZ1608S601A
L4G20 409P974010 CHIP BEADS - MMZ1608S601A T4G01 409P978010 EMI-FILTER-CHIP - DLP2ADN900HL4L
L4G25 325C421020 COIL-CHIP - 68MH-K LOW-R T4G04 409P978010 EMI-FILTER-CHIP - DLP2ADN900HL4L
L4L01 409P975010 CHIP BEADS - MPZ2012S221A T4G05 409P978010 EMI-FILTER-CHIP - DLP2ADN900HL4L
L4L02 409P974010 CHIP BEADS - MMZ1608S601A T4G06 409P978010 EMI-FILTER-CHIP - DLP2ADN900HL4L
L4L03 409P974010 CHIP BEADS - MMZ1608S601A T6C01 409P978010 EMI-FILTER-CHIP - DLP2ADN900HL4L
L4L04 409P974010 CHIP BEADS - MMZ1608S601A T6C02 409P978010 EMI-FILTER-CHIP - DLP2ADN900HL4L
L4L05 409P974010 CHIP BEADS - MMZ1608S601A
L5A01 409P975010 CHIP BEADS - MPZ2012S221A
L5A02 409P975010 CHIP BEADS - MPZ2012S221A
L5F06 409P974010 CHIP BEADS - MMZ1608S601A
TRANSFORMERS
T9010 350P865010 TRANS-PWR - SRW2630EG-U04H016

T9030 350P867010 TRANS-PWR - SRW16ES-U37V014
PAGE 42
WD-65837 / WD-73837 / WD-82837
VARISTORS RESISTORS
CHIP Type Resistors (Listed by Value)
RV9000 265P100040 VARISTOR - ERZV10D471CS
RV9001 265P100040 VARISTOR - ERZV10D471CS Part No. Value Part No. Value
VR2A11 265P151010 VARISTOR - AVF16C225A000F405 103P408040 1/10W 2.2-J 103P502040 1/16W 820-J
VR2A12 265P151010 VARISTOR - AVF16C225A000F405 103P508040 1/16W 2.2-J 103P492050 1/16W 1K-F
VR2A13 265P151010 VARISTOR - AVF16C225A000F405 103P408060 1/10W 3.3-J 103P502050 1/16W 1K-J
VR2A14 265P151010 VARISTOR - AVF16C225A000F405 103P500010 1/16W 10-J 103P492070 1/16W 1.2K-F
VR2A21 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P400010 1/10W 10-J 103P502060 1/16W 1.2K-J
VR2A21 265P151010 VARISTOR - AVF16C225A000F405 dgj 103P400050 1/10W 22-J 103P502070 1/16W 1.5K-J
VR2A22 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P500050 1/16W 22-J 103P493030 1/16W 2.2K-F
VR2A23 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P500090 1/16W 47-J 103P493050 1/16W 2.7K-F
VR2A24 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P794050 1/16W 68-F 103P493070 1/16W 3.3K-F
VR2A31 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P991020 1/16W 68-JX4 103P493090 1/16W 3.9K-F
VR2A31 265P151010 VARISTOR - AVF16C225A000F405 dgj 103P509090 1/16W 75-J 103P494010 1/16W 4.7K-F
VR2A32 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P401030 1/10W 100-J 103P503030 1/16W 4.7K-J
VR2A33 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P490030 1/16W 120-F 103P494080 1/16W 9.1K-F
VR2A33 265P151010 VARISTOR - AVF16C225A000F405 dgj 103P501040 1/16W 120-J 103P494090 1/16W 10K-F
VR2A34 265P151010 VARISTOR - AVF16C225A000F405 abcefhi 103P501050 1/16W 150-J 103P503070 1/16W 10K-J
VR2A34 265P151010 VARISTOR - AVF16C225A000F405 dgj 103P490070 1/16W 180-F 103P503080 1/16W 12K-J
VR2A43 265P151010 VARISTOR - AVF16C225A000F405 dgj 103P490090 1/16W 220-F 103P404000 1/8W 18K-J
VR2A44 265P151010 VARISTOR - AVF16C225A000F405 dgj 103P501070 1/16W 220-J 103P990050 1/16W 22-JX4
103P491000 1/16W 240-F 103P504010 1/16W 22K-J
103P491010 1/16W 270-F 103P495080 1/16W 24K-F
103P501080 1/16W 270-J 103P504030 1/16W 33K-J
103P491020 1/16W 300-F 103P504040 1/16W 39K-J
RESISTORS 103P501090 1/16W 330-J 103P496050 1/16W 47K-F
Conventional Resistors (By Ref #) 103P491050 1/16W 390-F 103P504050 1/16W 47K-J
103P502000 1/16W 390-J 103P504060 1/16W 56K-J
Ref # Part # Part Name & Description 103P491060 1/16W 430-F 103P504090 1/16W 100K-J
[#] 103P491070 1/16W 470-F 103P505000 1/16W 120K-J
R9001 109P179020 R-CEMT-PLT - 1.8 OHM-J 103P502010 1/16W 470-J 103P505030 1/16W 220K-J
R9003 109P291010 R-CEMENT-WIRE - RGB5PS-47-OHM J 103P491090 1/16W 560-F 103P505040 1/16W 270K-J
Type RGB5PS 5W Noble U.S.A., Inc. 103P502020 1/16W 560-J 103P506010 1/16W 1M-J
R9004 109P212090 R-SURGE - 1/2W 4.7M-J 103P400050 1/10W 22-J
R9005 103P145030 R-CARBON - 1/2W 220K-J
R9007 103C188020 R-METAL - 2W 2.2-J
R9019 103P145000 R-CARBON - 1/2W 120K-J
R9020 103P145000 R-CARBON - 1/2W 120K-J
R9021 103C187070 R-METAL - 2W 0.56-J
R9022 103C187070 R-METAL - 2W 0.56-J
R9025 103P142060 R-CARBON - 1/2W 1.2K-J
R9028 109D151060 R-CARBON - 1/4W 68-J
R9030 109D154010 R-CARBON - 1/4W 270-J
R9036 103C184000 R-METAL - 2W 18K-J
R9042 103C184000 R-METAL - 2W 18K-J
R9060 103P145030 R-CARBON - 1/2W 220K-J
R9075 103P143010 R-CARBON - 1/2W 3.3K-J
R9082 103C390030 R-METAL-P - 3W 15-J
R9083 103P145060 R-CARBON - 1/2W 390K-J
R9085 103P145030 R-CARBON - 1/2W 220K-J
PAGE 43
WD-65837 / WD-73837 / WD-82837
CAPACITORS AND TRIMMERS CAPACITORS

Conventional Capacitors (By Ref #) CHIP Type Capacitors (Listed by Value)
Ref # Part # Part Name & Description Part No. Value Part No. Value
C3A23 181P354090 C-ELEC - 35V 470M-M 154P340060 CK50V 5P-C 141P142010 B50V 0.01M-K
C3A24 181P354090 C-ELEC - 35V 470M-M 154P341010 CH50V 10P-C 141P142090 B25V 0.047M-K
C7AA9 189P252020 C-ELE-DBL-LAYER - EECS0HD224V 154P341030 CH50V 12P-J 141P144020 F25V 0.1M-Z
C9000 189P213020 C-M-POLY - AC250/275V 0.47M-M 154P341050 CH50V 15P-J 141P143030 B16V 0.1M-K
C9001 189P213020 C-M-POLY - AC250/275V 0.47M-M 154P341090 CH50V 22P-J 141P144030 F25V 0.22M-Z CK1608
C9002 189P213020 C-M-POLY - AC250/275V 0.47M-M 154P342030 CH50V 33P-J 141P146050 B16V 0.33M-K
C9004 189P217070 C-CER - AC250V E1000P-M 154P353060 SL50V 100P-J 141P146080 B10V 0.47M-K
C9005 189P217070 C-CER - AC250V E1000P-M 154P343050 CH50V 100P-J 141P148000 B25V 1M-K
C9006 189P217090 C-CER - AC250V E2200P-M 154P354040 SL50V 220P-J 141P144060 B16V 1M-Z
C9007 189P217090 C-CER - AC250V E2200P-M 154P344030 CH50V 220P-J 141P147020 B10/6.3V 1M-K
C9008 189P217070 C-CER - AC250V E1000P-M 141P140030 B50V 330P-K 141P147040 B6.3V 2.2M-K
C9013 181P189090 C-ELEC - 200V 100M-M 105C 141P140050 B50V 470P-K 141P147060 B6.3V 4.7M-K
C9014 142P010090 C-CER - B500V 470P-K 154P345010 CH50V 470P-J 189P253010 B6.3V 10M-M
C9015 181P732040 C-ELEC - 10V 3300M-M 105C 141P140090 B50V 1000P-K 189P253020 B16V 10M-M
C9016 181P731090 C-ELEC - 10V 470M-M 105C LOWR 141P141030 B50V 2200P-K 181P826050 50V 10M-M 105C
C9017 185D122040 C-ELEC - H200V 820M-M 141P141040 B50V 2700P-K 181P820010 6.3V 22M-M 105C
C9018 185D122040 C-ELEC - H200V 820M-M 141P141050 B50V 3300P-K 181P820030 6.3V 47M-M 105C
C9019 154P400030 C-CER - B1KV 470P-K 141P141060 B50V 3900P-K 181P822070 16V 100M-M 105C
C9021 181P555080 C-ELEC - 50V 10M-M 141P141070 B50V 4700P-K 181P828010 4V 220M-M 105C
C9030 154P400050 C-CER - B1KV 1000P-K 141P142000 B50V 8200P-K 141P242010 B50V 0.1M-K
C9031 142P010090 C-CER - B500V 470P-K 141P140060 B50V 560P-K 154P342010 CH50V 27P-J
C9035 181P734000 C-ELEC - 16V 2200M-M 105C 141P141090 B50V 6800P-K 154P344010 CH50V 180P-J
C9036 181P734000 C-ELEC - 16V 2200M-M 105C
C9039 181P555000 C-ELEC - 35V 2200M-M MISCELLANEOUS
C9046 142P010090 C-CER - B500V 470P-K
C9047 181P555030 C-ELEC - 50V 0.47M 246C578040 CABLE-DVI
C9070 189P258010 C-PLSTIC-PP - 630V-3300P-J 246C627010 AC POWER CORD
C9072 181P555090 C-ELEC - 50V 22M-M 299P321010 FAN-SCIROCCO - BG0703-B042-00L-T3
C9073 189P280010 C-M-PP - 7T2J333J-SM 299P335010 COOLING-FAN - LAMP/BALLAST
C9086 181P732040 C-ELEC - 10V 3300M-M 105C 299P339010 FAN-DMD
C9A06 181P731090 C-ELEC - 10V 470M-M 105C LOWR 299P337010 THERMAL SENSOR
C9A26 189P256030 C-ALUM - 16V 100M-M UUD1C101MCL1GS 411D044020 CORE-FERRITE - ZCAT2032-0930
C9A34 189P256030 C-ALUM - 16V 100M-M UUD1C101MCL1GS 411D062010 CORE-FERRITE - ZCAT1518-0730
C9A52 189P256030 C-ALUM - 16V 100M-M UUD1C101MCL1GS 434P004010 SWITCH-INTERLOCK
480P084020 SPEAKER - 8 Ohms 10 watts
491P240010 PROJECTION LENS
572C013010 SPRING-DOOR abcefh
622C489070 SPACER-SPEAKER abcefh
622D484010 HOLDER-LED
623D418010 HOLDER-FAN
SWITCHES 642B179010 DUCT-TOP
642B180010 DUCT-BOTTOM
642C431010 CATCH dgij
S8000 432P109010 SW-KEY BOARD - KSHS611BT dgij 642C432010 STRIKER dgij
S8002 432P109010 SW-KEY BOARD - KSHS611BT 642C438010 DAMPER-SPEAKER
S8003 432P109010 SW-KEY BOARD - KSHS611BT 716C044010 BADGE-BRAND abcefh
S8004 432P109010 SW-KEY BOARD - KSHS611BT 740B239020 BUTTON POWER abcefh
S8005 432P109010 SW-KEY BOARD - KSHS611BT 740B240010 BUTTON-POWER dgij
S8006 432P109010 SW-KEY BOARD - KSHS611BT 752C353010 TERMINAL-SIDE-JACK abcefhi
S8200 432P109010 SW-KEY BOARD - KSHS611BT abcefh 752C353020 TERMINAL-SIDE-JACK dgj
761A355040 COVER BACK abcde
761A359040 COVER-BACK fghij
761B471010 COVER-PORTHOLE
761B478020 COVER-LAMP
761B505020 DOOR-FRONT ac
PAGE 44
WD-65837 / WD-73837 / WD-82837
761B505030 DOOR-FRONT be PRINTED CIRCUIT BOARDS
761B506020 DOOR-FRONT f
761B506030 DOOR-FRONT h
761B511010 DOME-SPEAKER-R abcefh 934D057001 ASSY-PWB-LED abcefh
761B511020 DOME-SPEAKER-L abcefh 934C328001 ASSY-PWB-MAIN abcefhi
761B541010 SPEAKER-DOME dgij 934C328002 ASSY-PWB-MAIN dgj
761B550010 SBL-HOLDER dg 934C329001 ASSY-PWB-POWER
761C837010 LED CHIP dgij 934C331001 ASSY-PWB-SBL d gj
761C842010 SBL-LENS dgij 934D058001 ASSY-PWB-PREAMP abcefhi
761D999020 LED-CHIP abcefh 934D058002 ASSY-PWB-PREAMP d gj
771D127010 PAD-BOTTOM i j 934D059001 ASSY-PWB-SW-LAMP
771D127030 PAD-BOTTOM abce 934D060001 ASSY-PWB-CONTROL a bcefh
771D139010 PAD-BOTTOM dfgh 934D060002 ASSY-PWB-CONTROL dgij
771D139020 PAD-MIRROR-HOLDER fgh 934D062001 ASSY-PWB-RS232 dgj
915B403001 LAMP-CARTRIDGE (V41) 938P127010 ASSY-BALLAST-PWB
938P137010 COLOR-WHEEL
938P088010 DB-MODULE dgj
938P158010 OPTICAL-ENGINE ab
938P158020 OPTICAL-ENGINE ce COSMETIC PARTS
938P158030 OPTICAL-ENGINE fh
938P158040 OPTICAL-ENGINE i 760C825010 INLAY-CONTROL abce
955B378003 OPTICAL-ENGINE d
760C831010 INLAY CONTROL fh
955B378004 OPTICAL-ENGINE g
761A423010 COVER-FRONT i
955B378005 OPTICAL-ENGINE j
761A423020 COVER-FRONT j
3D 440C474010 PIN-JACK-MINI-DIN-3P
761A425010 PEDESTAL ij
AG9000 299P340010 SURGE-SUPPRESSOR DE37-452M-A21F
761B544010 65-ORNAMENT L&R d
F9000 283D161010 FUSE - 125V 10A
761B546010 ORNAMENT-C dgij
F9001 283P144080 FUSE - 125V 5A Type 20N Skygate Co. Ltd.
761B550020 SBL-HOLDER j
761B551010 73-ORNAMENT L&R g
761B552010 82-ORNAMENT L&R ij
F9A01 283P171090 FUSE-CHIP - KAB2402632NA29010
761B555010 ORNAMENT L/R a
24V 6.3A Type KAB Matsuo Electric Co. Ltd.
761B555020 ORNAMENT RIGHT a
J6C00 452C564010 DVI CONNECTOR
761B555030 ORNAMENT LEFT b
K9010 287P111060 RELAY-POWER - LKT1AF-5V
761B555040 ORNAMENT RIGHT b
K9011 287P111060 RELAY-POWER - LKT1AF-5V
761B556010 ORNAMENT LEFT c
P7E01 451C268010 JACK-IR BLASTER 1P dgj
761B556020 ORNAMENT RIGHT c
P9B01 440C457040 PIN-JACK-BOARD-9P
761B556030 ORNAMENT LEFT e
761B556040 ORNAMENT RIGHT e
761B557010 ORNAMENT LEFT f
761B557020 ORNAMENT RIGHT f
PC9010 268P125010 PHOTO-COUPLER - FOD617C
761B557030 ORNAMENT LEFT h
PC9020 268P125010 PHOTO-COUPLER - FOD617C
761B557040 ORNAMENT RIGHT h
TU1A01 295P571010 NTSC/ATSC TUNER - 115U4020AM
775B170010 NAME-PLATE a
X3A01 285P485030 QTZ-CRYST - SMD-49 24.576MHz
775B170020 NAME-PLATE c
X4A01 285P494010 QTZ-CRYST - HC-49/U 54MHZ
775B170030 NAME-PLATE f
X4L01 285P481070 QTZ-CRYST - SMD-49 7.3728MHZ
775B170040 NAME-PLATE i
X4L02 285P485030 QTZ-CRYST - SMD-49 24.576MHz
775B170050 NAME-PLATE d
X7A01 285P403020 QTZ-CRYST - DMX-S26S 32.768KHz
775B170060 NAME-PLATE g
X7A02 285P481090 QTZ-CRYST - SMD-49 20MHz
775B170070 NAME-PLATE j
Z8300 938P078010 UNIT-PREAMP - ROM-V3132SY
775B170080 NAME-PLATE b
775B170090 NAME-PLATE e
775B171010 NAME-PLATE h
PAGE 45
WD-65837 / WD-73837 / WD-82837
MIRROR KITS
KIT-MIR V41 60” 60” MIRROR KIT ab

KIT-MIR V41 65” 65” MIRROR KIT cde
KIT-MIR V41 73” 73” MIRROR KIT fhg
KIT-MIR V41 82” 82” MIRROR KIT ij
ACCESSORIES
290P175010 REMOTE-CONTROL - V41

774P001010 CLOTH-SOFT j
I/B WD60737 BASIC INSTRUCTION GUIDE
I/Q V41 QUICK-CONNECT-GUIDE
PAGE 46
WD-65837 / WD-73837 / WD-82837
SCREEN PARTS - 60”, 65” & 73” MODELS
Ref# Part# Description Model Ref# Part# Description Model

(0) LENS-TAPE TAPE-LENS (6) 622C487080 SPACER-SCREEN CORNERS fgh
(1) 491P217040 SCREEN-LENTICULAR ab (7) 622C489060 SPACER-SCREEN-TOP ab
(1) 491P217050 SCREEN-LENTICULAR cde (7) 622C489080 SPACER-SCREEN-TOP cdefgh
(1) 491P217060 SCREEN-LENTICULAR fgh (8) 622C550080 SPACER-SCREEN-B cde
(2) 491P218010 LENS-FRESNEL ab (8) 622C550090 SPACER-SCREEN-B ab
(2) 491P218020 LENS-FRESNEL cde (8) 622C601030 SPACER-SCREEN-B fgh
(2) 491P218030 LENS-FRESNEL fgh (9) 622C608010 SPACER-SCREEN-S fgh
(3) 593B341010 HOLDER-SCREEN T cde (10) 621B211010 COVER-HOLDER-T cde
(3) 593B350010 HOLDER-SCREEN-T ab (10) 621B212010 COVER-HOLDER-T ab
(3) 593B371010 HOLDER-SCREEN-T fgh (10) 621B213010 COVER-HOLDER-T fgh
(4) 593B342010 HOLDER-SCREEN B cde (11) 761A382020 BEZEL-FRONT ce
(4) 593B359010 HOLDER-SCREEN-B ab (11) 761A383020 BEZEL-FRONT ab
(4) 593B372010 HOLDER-SCREEN-B fgh (11) 761A384020 BEZEL-FRONT fh
(5) 621B196010 HOLDER-SCREEN S ab (11) 761A422010 BEZEL-FRONT d
(5) 621B196020 HOLDER-SCREEN S cde (11) 761A424010 BEZEL-FRONT g
(5) 621B207010 HOLDER-SCREEN-S fgh
1 LENS-TAPE 11
6 2
9
73" BEZEL FRONT
CORNERS
X2 3
10
4 5
PAGE 47
WD-65837 / WD-73837 / WD-82837
SCREEN PARTS 82” MODELS
Ref# Part# Description Model (12) & (13) SCREEN

(1) 491P231010 SCREEN-LENTICULAR ij HOLDERS
(2) 491P232010 LENS-FRESNEL ij
(3) 711B073010 COVER-HOLDER-T i LENTICULAR
(3) 711B073020 COVER-HOLDER-T j SCREEN
(4) 635B135010 CORNER-S-T ij
(5) 761B538020 CORNER-CAP-TOP-R i
(5) 761B538040 CORNER-CAP-TOP-R j
(6) 711B074020 HOLDER-SCREEN-S-R i 12
(6) 711B074040 HOLDER-SCREEN-S-R j
FRESNEL
(7) 635B136020 CORNER-B-R ij
LENS
(8) 711B075010 HOLDER-SCREEN-B ij
(9) 635B136010 CORNER-B-L ij
(10) 711B074010 HOLDER-SCREEN-S-L i
(10) 711B074030 HOLDER-SCREEN-S-L j
(11) 761B538010 CORNER-CAP-TOP-L i 13
(11) 761B538030 CORNER-CAP-TOP-L j
(12) 623D513010 HOLDER-SCREEN-TOP/BOTTOM ij
(13) 623D513020 HOLDER-SCREEN-SIDES ij
4
1 2
3
4
11
5
10
FRONT
6
8 7
PAGE 48
WD-65837 / WD-73837 / WD-82837
MIRROR KIT PARTS LIST
MODEL KIT PART DESCRIPTION PART # QTY

WD-60C9 MIRROR 60 Inch 767D088050 1
KIT-MIR V41 60"
WD-60737 HOLDER-MIRROR-EDGE 623D439050 3
WD-65C9 MIRROR 65 Inch 767D088070 1
WD-65737 KIT-MIR V41 65" HOLDER-MIRROR-EDGE 623D439020 3
WD-65837 STIFFENER, 703mm 601D001030 2
MIRROR 73 Inch 767D088080 1
WD-73C9 HOLDER-MIRROR-EDGE 623D439040 3
WD-73737 KIT-MIR V41 73" HOLDER-MIRROR-EDGE-T 623D439030 1
WD-73837 STIFFENER, 850mm 601D001050 2
STIFFENER, 1100mm 601D001040 1
MIRROR 82 Inch 767D089010 1
WD-82737 HOLDER-MIRROR-EDGE-T 623D512010 1
KIT-MIR V41 82"
WD-82837 HOLDER-MIRROR-EDGE-B 623D512020 1
HOLDER-MIRROR-SIDE 623D515010 2
MIRROR PREPARATION
Prepare the mirror for installation by adding HOLDER-MIRROR-EDGE and STIFFENERs to the back of the mirror
.
The back of the mirror is identified by the date code printed in the lower right corner
.
NOTE: No stiffeners are used in the 60 inch or 82 inch models.
STIFFENER INSTALLATION
Side Stiffener Top Stiffener
40mm from SIDE Edge and 84mm
65" Models N/A
from BOTTOM EDGE
40mm from BOTTOM Edge and
73" Models 130mm from TOP Edge
40mm from SIDE EDGE
Page 49
WD-65837 / WD-73837 / WD-82837
LEGEND
60 Inch Mirror Assembly A) Backside of Mirror (Date Code printed on
A bottom right side)
B) HOLDER-MIRROR-EDGE SIDES
C) STIFFENER-SIDES
D) HOLDER-MIRROR-EDGE TOP
E) STIFFENER-TOP
F) HOLDER-MIRROR-EDGE BOTTOM
B B
65 Inch Mirror Assembly
A
B 40mm
(DATE CODE)
89mm 71mm
C
B B
B
(DATE CODE)
60mm 84mm

REAR
A
40mm D
EDGE
130mm
E
B C B

B 25mm A F
(DATE CODE)
40mm 55mm
FRONT
B B
FRONT
D FRONT
(DATE CODE)
20mm 28mm
Page 50
WD-65837 / WD-73837 / WD-82837
7
F9001 F9002 D9031
340V T9010 18VS
5 1 11 6
To
Lamp 1
Ballast 5
PL AGND
Drain 1 3 12 4
D9023 R9028 7 D9026
Vcc 4 5 8
12VS
11
OCP 7 R9021 10
D9020 D9024 R9033
6 9 R9031
9
Main R9022 10 F9003 8
SMPS
PC9010 R9034 To
Regulator
D9001 IC9010 PWB
4 1
R9032 Main
D9022 R9037
R9035
FB 6 3 2
REF
IC9020
R9029
Source 3
R9060 C9018 K9011

5VSL
2
C9017 MAIN-RELAY
R9085 Q9009 3
K9010 R9041
PD
R9001
R9019 R9020
F9000
L
1 Q9008
D9010 D9011 R9039
N
3
PS 5 T9030 C9086
Start 5
R9087 R9086
4 D9013
D9008 D9009 3
Drain 8
7
Drain 7
D9012 R9030
Vcc 2 11
2 R9016
OCP 1 R9012
1
Standby R9007 R9008

10
SMPS
Regulator R9013
12V
IC9030 PC9020
1
2 To
FB 4 4 1
Optical
3 Engine
R9010
GND 3 3 2 R9011
REF 4
IC9031
PE
PWB POWER Live Cold
Page 51
WD-65837 / WD-73837 / WD-82837
PWB POWER PWB MAIN

Audio
Output
IC3A00
25 30 31 36
18VS
6 6 18VS
7 7 Voltage Doubler
D9A01, D9A02, Q9A11
30VSL
5 3.3VS 7 3.3VS
12VS F9A01 Regulator
10 10 12VS 6 Q9A01 8 5 2.5VS
Regulator 1 2.5VS
11 11 8 IC4G01
5 1.2VS 7
Regulator 1.2VS
5VSL
6 Q9A03 8
2 2 5VSL
PD PD 7 1.8VS 5
Regulator 5
8 Q9A02 6
1.0V Regulator 1 1.0V
IC5A02
8
Source Used In Circuit 5 A1.0V

Regulator 1 A1.0V
8 IC5A03
1.0V ASIC
A1.0V ASIC 1.8VS
1.2VS DM 1
5VS
1.8VS ASIC, Audio, CPLD, DM, SDRAM 2 3 Q9A05 Q9A04 STBY-ON
Switch
2.5VS DM 5 FET
Q9A06
4 5VS
ASIC, CPLD, DM, Flash ROM, HDMI, RS232, 6
3.3VS
TMDS, TV PC, UART
3.3V-SS
8 Regulator 1 3.3V-SS
3.3VSL HDMI, LED, Pre-Amp
IC6A02
ABU3.3V TV PC
ABU3.3V
BU3.3V
BU3.3V
DBU3.3V TV PC 1 Regulator 5
IC7A03
DBU3.3V
3.3V-SS TMDS
3.3VSL
5VS Audio, PreAmp, TMDS, Tuner, USB 1 Regulator 5 3.3VSL
IC9A04
30VSL Tuner
Page 52
WD-65837 / WD-73837 / WD-82837
LAMP
BALLAST
STANDBY
AC
SMPS
STANDBY ON
FET Switch 5VS
340V
DOUBLER
CIRCUIT
5VSL
18VS
MAIN
SMPS
ABU3.3V TV PC
12VS
3.3VSL BU3.3V
DBU3.3V RELAY
REMOTE
IR SENSOR 3.3VS
KSC0
2.5VS
CONTROL
KSC1
1.8VS
AC (LINE)
12V
AC (NEUTRAL) (To Engine) 1.2VS
Page 53
WD-65837 / WD-73837 / WD-82837
PWB MAIN
HDMI Processor Microprocessor UART
IC2A01 IC7A01 IC4L01
CEC-A
TV-TXD TXDF
DM_TXD TXA
DSCL1
TV-RTS RTSF
DSDA1 CEC-D CEC DM-RTS RTSA
HDMI 1
R1PWR5V
TV-CTS CTSF
INT HDMI-F-INT DM-CTS CTSA
TV-RXD RXDF
CSCL HDMI-SCL DM_RXD RXA
DSCL2 CSA
DSDA2 CSDA HDMI-SDA RXB
HDMI 2
R2PWR5V CSB
HDMI-DET (0) TXB
HDMI-DET (3)
DSCL3
DSDA3 HDMI-DET (2) CPLD
HDMI 3
R3PWR5V IC4L02
HDMI-DET (1)
B4
DSCL0 B2
DSDA0 ENG-SCL
HDMI 4
R0PWR5V
ENG-SDA
TMDS
IC6C00
Multi-Format Decoder
IC4A02
IDCK
1 DE
Optical
Engine
2 VSYNC
UART TXD 1
ENG
HSYNC
UART RXD 1
TUNER-SCL
TUNER ASIC
TUNER-SDA IC5A01
ASIC-RSTN
BSC-SCL HSZ_OUT
ASIC-MTOD
BSC-SDA VSZ_OUT
Audio Output SERIAL FLASH
ASIC-DTOM
IC3A00
I2S-CLK DE_OUT
ASIC-CLK
I2S-DATA CLK_OUT
ASIC-CS
Page 54
WD-65837 / WD-73837 / WD-82837
PWB MAIN OPTICAL ENGINE

DVI
CABLE
J6C00 J6C00
Microprocessor PWB POWER

IC7A01
PWB PREAMP 5 340V
ENGINE-ID 109
1
GND 1 1 DLP-ASIC-READY 50
PreAmp 2 2 126 RMC
ENG-SDA 8
PL
3.3VSL 3 3 3.3VSL 75 SYST5-CARMASK1

ENG-SCL 9
PreAmp 4 4 20 SYST5-CARMASK2
DLP-RST 64 LAMP BALLAST LAMP
5VS 5 5 5VS 125 SYST5-CAPTURE
LAMPLIT-OUT 61
3 LAMP GND
LE1
LAMPEN 6
1 340V
1
CJ1
4
CJ4
Q7A03 Q7A05 4 4 LAMPEN
PWB CONTROL
LAMPLIT 63 1 1 LAMPLITZ
1 6 102 KSC1
LAMPLIT-RX 128 2 2 GND
2 7 103 KSC0
5VS 3 3 5VS
GND 3 8
4 9 68 LED-G LAMPDIM-TX 127 5 5 DIM
5 10 67 LED-R CJ3
COVER-DET 91 6
LE2 LE
7
FB PWB-SW-LAMP
1
2
CD
Page 55
WD-65837 / WD-73837 / WD-82837
PWB MAIN
USB 2.0 USB IN

Multi-Format Decoder
IC4A02
ASIC TMDS
IC5A01 IC6C00 Optical Engine
HDMI 1 DVI
HDMI CABLE
HDMI 2 Processor LVDS OUT
IC2A01 HDMI IN
HDMI 3
J6C00 J6C00
HDMI 4
V41+ only
ATSC IF+
Tuner NTSC Tuner IN
QAM IF-
Analog Video IN
Y/Pb/Pr or CVBS
Analog Audio IN
Input 1
L/R Audio
Digital
SPDIF Audio
Output
Y/Pb/Pr or CVBS
Audio DAC AVR - L
Input 2
I2S IC3C00 AVR - R
L/R Audio
Audio
I2S (Audio L/R) OUT Output
IC3A00 Speaker(s) OUT SP L+
1
Y/Pb/Pr or CVBS
SP L-
2
Input 3
L/R Audio
SP R-
4
SP R+
5
ES
L/R Audio
DVI/PC
Page 56
L_SP
R_SP
R_OUT-
L_OUT-
R_OUT+
L_OUT+
V
PS
1 2 3
L
N
BOSS
1
SPL+
2
SPL-
3
ES
4
SPR-
5
SPR+
11
BOSS
BOSS
6 1
1
GND GND 2
7
3
2
RXD
2
RXD 8
PJ8232
4
V41+ only
PG2
PG2
9
BOSS
TXD
3
TXD 5
BOSS
1
ENG-PWR-ON 10
1
ENG-PWR-ON
2
5VSL
2
5VSL
PWB-RS232
MAIN-RELAY
3
MAIN-RELAY
4
AGND
4
AGND
5
PWB-POWER
AGND
AGND 5
6
PD
18VS
6
18VS
PD
7
18VS
7
18VS
8
GND
8
GND
9
GND
9
GND
10
12VS
10
12VS
12VS
11
12VS
11
GND
GND
12VC
12VC
NC
NC
LAMP GND
NC
340V
BOSS
1 2 3 4 5 3 1 LED-G
VH V
PE PL
2
LED-R
PWB-LED
KSC0
LE3
4
GND
VH
CJ1
1 2 3
V41C/V41 only
340V
LAMP GND
GH
1
12
LAMPLITZ GND
2
GND
11
KSC0
3
5VS
10
4
CJ3
LAMPEN LED-R
5
DIM
9
LED-G
8
GND
7
1
KSC0 KSC1
1
6
2
KSC1
LE
KSCO
BOSS
5
3
5VS GND
LAMPLITZ
CJ4
1
LAMP
PWB-CONT
4
4
4
LE2
IR-IN LED-G
2
GND
3
5
3.3VSL LED-R
VH
3
BALLAST
5VS
2
6
RMC N/C
4
LAMPEN-BALLAST
FB
1
GND
PWB-MAIN
DIM
BOSS
COVER-DET
7
GND
(LE2 Pin 1,2,3 use for V41C,V41)
(LE2 Pin 1,2,3,4,5 use for V41+)
EXHAUST FAN
BALLAST FAN
(Scirocco FAN)
BOSS
CD
1
GND
1 2 3 4
BOSS
2
RMC
GND
3
3.3VSL
LE1
4
IR-IN
COVER-DET
5
5VS
PWB-SW-LAMP
PWB-PREAMP
Molex 78128-1001
PE2 J8 J4
1 2 3 4 1 2 3 4 1 2 3
(LE1 Pin 1,2,3,4,5 use for V41+)
(LE1 Pin 1,2,3 use for V41C,V41)
GND
GND
GND
NC
12VC
GND
VCC
VCC
12VC
VH
SENSOR
SENSOR
LAMP
4
4
1
1
5VSL 5VSL
2
2
LE5
LE5
3
3
LRTN LRTN
Switch
5
5
Thermal
DLP ENGINE
V41+ only
PWB-SBL
J3
1 2
4
OUT A
3
GND
OUT B
2
J6
OUT C
LAMP Temp
CTAP
CW
3
5V
2
Index Delay
1
TX2- TX2-
J7
1
2
GND
2
TX2+ TX2+
3
TX2_SHIELD(AGND) TX2_SHIELD(AGND)
4
BLP-ASIC-READY(DLP) DLP-ASIC-READY(DLP)
5
DIM-DVI DIM-DVI
6
3.3V_ENG_SCL(DLP)
6
3.3V_ENG_SCL(DLP)
7
3.3V_ENG_SDA(DLP) 3.3V_ENG_SDA(DLP)
8
8
9
TX1- TX1-
TX1+ TX1+
RESETZ-DVI(DLP) RESETZ-DVI(DLP)
V41+ only
TP7_FB_OUT TP7_FB_OUT
ENGINE-ID ENGINE-ID
GND(5V&H/V-SYNC:AGND) GND(5V&H/V-SYNC:AGND)
DB CTL DVI CABLE DB CTL

J6C00
J6C00
TX0- TX0-
TX0+ TX0+
Shutter
DB Module
SP Module
LENS
LAMPEN-DVI(DLP) LAMPEN-DVI(DLP)
DMD Chip
1 2 3 4
LAMPLIT-DVI(DLP) LAMPLIT-DVI(DLP)
10 11 12 13 14 15 16 17 18 19 20 21 22
TXC_SHIELD(AGND)
10 11 12 13 14 15 16 17 18 19 20 21 22
TXC_SHIELD(AGND)
TXC+
23
J1
TXC+
23
TXC- TXC-
DMD
TEMP
DMD_FAN
J10
TMDS
24 25 26 27 28 29
1 2 3
24 25 26 27 28 29
J9
J5
GND
1 2 3 4
TMDS
P12V
1 2 3
GND
GND
DB drive
SP12V
GND
VCC
SENSOR
SP Signal
PL V
5 3 1
D9001
D6SB80-7001
*C9018
820U
R9060 200V
220K
1/2W
R9004
4.7M-J (UL)
1/2W
340V *C9017
R9085
POWER 220K
1/2W
820U
200V
C9008
AC250V E1000P-M(X1/Y1)
SUPPLY
*F9002
*T9010 125V 5A
SRW2630EG-UXXVXX
Type 20N
Skygate Co. Ltd.
*D9031 AUDIO 18VS SUPPLY
30PHA20-FC5 18VS
*R9075
IC9010 *C9046
470
*C9039
2200U
3.3K
1/2W
500V
MAIN POWER SUPPLY 3 11
35V
AGND
*C9041
SARS01 *R9079 0.1
D9005 22 25V/16V
F9001 1 1/10W
125V 5A R9082
Type 20N 15 R9036 1 12
3W 18K
3 2 1
Skygate Co. Ltd.
2W
ET9002
*IC9010 10
STR-W6754 R9042
18K
C9030 2W
C9031
1000
470
SS/OLP
OCP/BD
1KV
C9073 9 500V
S/GND
0.033U
N/C
VCC
630V
FB
D
5
R9019 R9020 6 7 *D9026
120K 120K 1 2 3 4 5 D9023
FCHS10A12-15A
1/2W 1/2W 11EFS2N-TA2B5
CHASSIS 12VS SUPPLY
3
8
12VS
2
R9028
C9019 68
470 1/4W
1KV
1
D9020 R9025 6 7
C9021 1.2K C9037
1S2076A/1S2471OM
10U 1/2W 0.1
50V *C9035 *C9036 25V/16V
C9022 C9023 C9025 D9024 2200U 2200U
K-1M 470 2200 16V 16V
11EFS2N-TA2B5 F9003
25V 25V/50V 50V 125V 5A
Type 20N
Skygate Co. Ltd.
*R9021 *R9022 D9022

0.56 0.56 C9024 R9024 MTZJ6.2C@LF
2W 2W 0.1 100
16V 1/10W
R9037 PC9010 R9031

R9023 3.3K 1K
1/16W FOD617C 1/16W
1K J8
1/16W
4 1
R9032 R9033
1K 390
3 2 1/16W R9043
56K 1/16W
1/16W
R9029 C9043
1K 16V/25V R9034
1/16W 18K
0.047 1/16W
2K
LIVE COLD IC9020
RT9H301C
1
Ref
12V
3A
R9035
4.7K
1/16W
T9030
SRW16ES-U37V014
D9011
IC9030 D9009
1N4006 1N4006
5
STANDBY SUPPLY C9013
100U
200V
D9008 D9010
R9086 C9070 R9083 1N4006
1N4006
18K 3300P-J 390K
1/2W
1/10W 630V 1
2
R9087 D9006
18K
1/10W
UF4007
C9014
5VSL SUPPLY
470
500V
IC9030 R9030 7
STR-A6159 270 L9005
1/4W
3
Drain 8
Drain 7
Start 5
6.8MH 9X9.5
5VSL
N/C
D9012
11
C9072
22M 1S2076A/1S2471OM 4 D9013
50v 31DQ06-FC5 R9012
47
C9016 1/16W
10 C9015 470U
3300U 10V
10V
R9013
1K
1/16W
1 OCP
2 Vcc
3 GND
4 FB
R9016
220
PC9020 1/16W 2 K R9014 C9084 C9087
470 K-1M R9088
FOD617C 1/16W 100 K-1M
25V 25V
1 1/16W
4 1 IC9031 Ref
R9011
D9014 560 RT9H301C
MTZJ4.7A,B,C@LF 1/16W R9010
3 A
1K
R9008 R9007 3 2 1/16W
22 2.2
1/10W 2W
C9047
.47U
50V
D9018
1S2076A/1S2471OM
K9011
R9001
1.8 1
10W
4 340V IN-RUSH RELAY.
2 3
Q9009
K9010 2SC3052-T112-1E,F R9041
390
1/16W MAIN-RELAY
1 4
2 3
D9019
R9005
220K 1S2076A/
1/2W 1S2471OM
R9003
RGB5PS-47-OHM J OR K 340V RELAY
TYPE RGB5PS R9039
390
NOBLE U.S.A., INC. 1/16W
Q9008
2SC3052-T112-1E,F
C9002 C9086
0.47U
250V/275V 3300U
10V
1 4
C9007
AC250V E2200P-M(X1/Y1)
L9002
SC22-05-70J
C9006
2 3 AC250V E2200P-M(X1/Y1)
C9005
C9001 AC250V E1000P-M(X1/Y1)
0.47U
250V/275V
C9004
12V
12V
MAIN-RELAY
5VSL
18VS
18VS
12VS
12VS
AC250V E1000P-M(X1/Y1)
AGND
AGND
1 4
L9001
SC22-05-70J
BOSS
1 2 3 4 5 6 7 8 9 10 11
2 3
1 2 3 4
PD VH
C9000 PE
0.47U
250V/275V
RV9000
ERZV10D471CS AG9000
DE37-452M-A21F
RV9001
ERZV10D471CS
F9000
S10A 125V
1 2 3
L 1 2 3 N
PS V ET9001
TO MAIN 10
TO MAIN 04
TO MAIN 10
[DMCORE]
[MICRO]
[MICRO]
RS232
V41+ Only
*PG2 TO MAIN 09 TO MAIN 10
TO MAIN 10 [AUDIO] [MICRO]
3.3VSL
1.2VS
30VSL
3.3VS
1.8VS
[MICRO] 1 2 3
5VS
AVR-DET
AVR-R
AVR-L
BOSS
AVR-MUTE
SPDIF-OUT
SPDIF-DET
PON-SHORT
12VS-OFF
5VSL-OFF
USB-OFF
PC-TXD
PC-RXD
RXD
TXD
D9A08
IC9A07 MC2838-T112-1
PST8242NR
R9A65
10K
TO MAIN 03,10 5VSL 1/16W
1 OUT NC 5
[HDMI, MICRO]
2 VDD
5VS SWITCH FET
C9A75
0.01 3 GND NC 4
25V/50V
Q9A06 INPUT2Y
FDC655BN INPUT1Y
3.3VSL INPUT2PR
1 6
INPUT1PR
TO MAIN 04
IC9A04 P9B02
MM3376A33NRE R9B02
P9B01 Y2 PB2 PR2 [DMCORE]
INPUT2PB
120K DVI-R DVI-L 1
2 5 AVR-L
2 INPUT1PB
1 VDD VOUT 5 1 11
C9A36 C9B01 R9B01 C9B02 C9B51
R9A10 R9A11 C9A35 R9A16 10
100K 10K 2.2K 2 1U C9A37 C9A38 C9A39 K-4.7M 1K K-4.7M R9B11
0.1 GND 50V
1/16W 1/16W R9A12
33K
R9A13
22
3 4
16V
1/16W 10V/6.3V 6.3V 0.1 0.1 B6.3V 1/16W B6.3V R9B04 R2 120K
1/16W Y1 PB1 PR1
1/16W 1/16W
22
25V/16V 25V/16V 120K AVR-R L2 3
Q9A04 3 CE NC 4 2 12 4
RT1N436C-T112-1 C9A18
C9B03 R9B03 C9B04
TO MAIN 10 0.1
16V
C9A19 K-4.7M 1K K-4.7M 3 R9B30
100 B6.3V 1/16W B6.3V 75
STBY-ON R9B00 R9B12
Q9A05 16V 1/16W 5 6 7 8 9 10 11 12 13
[MICRO] 2SC3052-T112-1E,F
220K R1 120K
1/16W
C9B50
10
R9B09
100K
SPDIF L1 50V
1/16W 4 13
5
6 14 R9B35 C9B31 R9B34 C9B33

75 100 75 100
4
C9A85
C1
1/16W 1/16W
B2
50V 50V
E2
0.1
25V/16V
R9B92 R9B31
270K
Q9B02 1/16W
75
1/16W
RT3Y97M-T111-1
R9B05
1K 7 8 9 10
1/16W
B1
C2
R9B26
E1
Q9B01 10K
R9B33 C9B30 R9B32 C9B32
3
RT1N436C-T112-1 1/16W
75 100 75 100
R9B13 R9B15 1/16W 50V 1/16W 50V
R9B27
120K 120K 10K
1/16W
R9B10
D9A06 100K
R9A01 1/16W R9B28
22 MC2838-T112-1 10K
1/16W R9B14 R9B16 1/16W IN1PB-DET
C9A02 120K 120K IN1Y-DET TO MAIN 04
C9A01
0.1
0.1
50V
MUTE AVR R9B29
10K IN2Y-DET
50V
1/16W IN2PB-DET [DMCORE]
R9B19
3.3K
3 3 30V TUNER SUPPLY 1/16W Q9B05
C9B05 2SC3052-T112-1E,F
R9B17 R9B66 R9B23
BAT54S BAT54S 820 1U 100 C9B43 C9B42
10V/6.3V 220K
R9A02 D9A01 D9A02 1/16W 1/16W 1/16W 100 100
100 Q9A11 50V 50V
1/16W 2 1 2 1 C9B07
R9A32 2SC3052-T112-1E,F R9B21
100 75 1U
1/16W 1/16W 10V/6.3V
R9B20 C9B41 C9B40
R9B18 100 100
C9B06 3.3K
560 50V 50V
R9A31 R9A33 0.1 1/16W 1/16W
10K 22 25V/16V R9B24
1/16W R9B22 12K DVI-L
1/16W 120
1/16W 1/16W
C9B10 R9B67 DVI-R
2.2U 39K
6.3V 1/16W R9B40
D9A04 C9B08
12K INPUT2-L
1U
MAZ8150GHL 1/16W
10V/6.3V
C9A05 INPUT2-R
10 R9B25
C9A03 C9A04 D9A03 50V 1K TO MAIN 04
R9A70 1/16W INPUT1-L
0.1 0.1 MAZ8160GHL 100K
50V 50V 1/16W [DMCORE]
INPUT1-R
C9B12 R9B68 INPUT3-L

2.2U 39K R9B45
6.3V 1/16W 12K
1/16W INPUT3-R
F9A01
KAB2402632NA29010
24V 6.3A Type KAB
Matsuo Electric Company, Ltd.
C9B14 R9B69
2.2U 39K
C9A21 6.3V 1/16W
10uF R9B50
12K
16V
1/16W
C9A20 C9A24
100 0.1
16V 25V/16V
RS232
12VSL TO 3.3VS V41+ Only C9B16 R9B70
2.2U 39K R9B55
6.3V 1/16W 12K
R9A40 1/16W
33K
1/16W R9A41 *R9E07
Q9A01 IC9A01 Q9A09 100K 100
ISL6545ACBZ-TS2698 1/16W 1/16W
2SC3052-T112-1E,F
*R9E06
FDS8984
1/16W
C9A23
R9A48
100
0.1 4.7
25V/16V 1/16W
C9A90 C9A91 C9A92 C9A93 C9A94 C9A95 C9A96
1
BOOT PHASE R9A23 0.1 0.1 0.1 0.1 0.1 0.1 0.1
22
25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V
L9A05 1/16W *L9E03 C9B18 R9B71
Q9A10 2.2U 39K
2
*R9E04
CDRH8D43NP-2R0NC UGATE COMP/SD *C9E06 33MH
*R9E03
1/16W
1/16W
5 4 C9A32
47 6.3V 1/16W
100
100
R9A47 8200 2SC3052-T112-1E,F
4.7 6.3V
25V/50V
1/16W R9A42
3
GND FB 10K R9B60

Q2 1/16W *C9E15 12K
6 3 0.01 1/16W
25V/50V
4
LGATE/OCSET VCC
L9A03 R9A15
N-220 ohm 2.2 R9A46
1/10W 0 *R9E05
1/16W R9A45 0
L9A02 7 2.2 1/16W
2
T1OUT 17
GND 18
VCC 19
FORCEOFF 20
INVALID 11
T1IN 13
FORCEON 14
N-220 ohm C9A29
T2IN 12
R1OUT 15
R1IN 16
1/16W
1000
L9A01 50V R9A43 C9A33
N-220 ohm 9.1K 8200 R9A21
275P989-11
Q1 1/16W 25V/50V 220
8 1 1/16W
C9B20 R9B72
R9A19 R9A20
C9A30 4.3K 270 2.2U 39K
C9A26
1/16W 1/16W 6.3V 1/16W
10 R2OUT
8 T2OUT
M-101 C9A27 C9A28 K-1M R9B65
9 R2IN
16V 10uF 10uF 25V 12K
2 C1+
6 C2-
5 C2+
4 C1-
D9A09 1% 1/16W
6.3V 6.3V
7 V-
3 V+
1 EN
FLZ3V9 C9A25 R9A27
10uF 1K
6.3V 1% 1/16W
10V/16V
10V/16V
10V/16V
*C9E01
*C9E12
*C9E14
*R9E02
*R9E01
1U
1U
1U
0
0 1/16W
1/16W C9B22 R9B76 R9B78
2.2U 39K 12K
6.3V 1/16W 1/16W
*C9E07
1U
*IC9E01 10V/16V
INPUT3Y
MAX3223ECAP+T
C9B24 R9B82 INPUT3PB
2.2U 39K
6.3V 1/16W R9B84
INPUT3PR
TO MAIN 04
12K
1/16W
Customer Interface
[DMCORE]
IN3PB-DET
IN3Y-DET
9
8
3D 10
3.3VS TO 1.8VS 3 5
Q9A02 IC9A02 7
ISL6545ACBZ-TS2698
FDS8984 C9A57
0.1
25V/16V
P9B03
1
BOOT PHASE
L9A06 1
N-220 ohm
2
5 4
R9A24
UGATE COMP/SD
IC9G80
C9A51 4.7 MIC2040-1YMM TR 2
10uF 1/16W IC9A06 R9G81
47K
3
6.3V C9A50 GND FB

PST8242NR C9G80
Q2 C9A61 1/16W
10uF
10
R9A30 R9B86
1
3900 VOUT 0.1
6.3V 6 3 10K EN 10K 3
50V 25V/16V L9G80
1/16W L9G81 1/16W
4
LGATE/OCSET VCC
R9A62 1 OUT NC 5 4
L9A07 N-220 ohm N-600 ohm
R9A22 13K
CDRH8D43NP-2R0NC 0
2
FAULT VIN
9
1/16W
1/16W C9A62 5
7 2
220
50V
2 VDD
C9A80
R9B85
8
R9A04 R9A18 0.01 VLOIN VOUT
3 GND NC 4
10K 6
2.2 2.7K 25V/50V R9A61 1/16W
1/10W 1/16W R9A25 7
Q1 2.2 9.1K
8 1 1/16W 1/16W
7
GND VIN C9G81 8
47
C9A34 6.3V
C9A42 C9A73
M-101
P9B04
6
10uF 1000
C9A60
ILIM VBIAS
16V
6.3V 50V
K-1M R9A29 TO MAIN 08
25V 4.3K R9G80 STEREO-SYNC
1
R9A26
2.2K 1/16W 430 [TMDS]
1/16W C9G82
1/16W
47 2
6.3V
R9A28
180 C9G83
1/16W 0.1
25V/16V 3
C9B44 C9B45 C9B35 C9B34 C9B52

100 100 100 100 10
50V 50V 50V 50V 50V
R9B87 R9B88 R9B89 R9B90
L9A15
L9A14
L9A13
120K R9B91
L9A12
L9A11
120K 75 75 75
1/16W 1/16W 1/16W 1/16W 1/16W
3.3VS TO 1.2VS
L9A18
LAMPEN-BALLAST_
IC9A03
Q9A03 C9A54 ISL6545ACBZ-TS2698
FDS8984
COVER-DET_
0.1
LAMPLITZ_
25V/16V
1
BOOT PHASE
L9A16
DIM_
5VS_
N-220 ohm
2
UGATE COMP/SD
5 4
C9A58 R9A53
10uF 4.7
1/16W BOSS
3
6.3V C9A53 GND FB

Q2
10uF C9A55 R9A56 7 6 5 4 3 2 1
6 3 3900 10K
6.3V 1/16W
4
LGATE/OCSET VCC 50V

L9A17 R9A52 C9A06
CDRH8D43NP-2R0NC 0 470U
FB
1/16W C9A56 C9A17
10V
7 220 0.1
2 50V
25V/16V
R9A51 R9A54 KSC0
2.2 3.3K
1/10W Q1 1/16W R9A57
2.2
8 1 1/16W KSC1
IR-IN
C9A52 C9A59 C9A64
M-101 10uF 1000 C9A67
16V C9A16 C9A15
6.3V 50V K-1M R9A59 0.1 0.1
3.3VSL
25V R9A58 4.3K 50V 50V
4.3K 1/16W
MAIN-RELAY
1/16W RMC
MAIN-RELAY
LAMPEN-BALLAST
R9A60
68
1/16W
COVER-DET
5VSL
AGND
AGND
DGND
DGND
12VS
12VS
18VS
18VS
LAMPLITZ
18VS
AGND
3.3VSL
IR-IN
KSC1
KSC0
BOSS
RMC
BOSS
DIM
10 9 8 7 6 5 4 3 2 1
LAMP-R
LAMP-G
12 11
1 2 3 4 5 6 7 8 9 10 11
LE
TO MAIN 09 TO MAIN 10 PD TO MAIN 10
[AUDIO] [MICRO] TO MAIN 10 [MICRO]
[MICRO]
USB2.0
MAIN-01
DCDC/JACK 5VS
R1B03
MAIN-04 USB-PWRON1 47K
1/16W
DMCORE R1B01
TU1A01 3.3K Q1B01
3.3VS 1/16W
115U4020AM MAIN-01 RT1N436C-T112-1
IC1B01
DCDC/JACK MIC2040-1YMM TR
NC (RF AGC)
NTSC IF OUT
VIDEO OUT
IF OUT (-)
IF OUT (+)
22 24 R1B02
32V (VT)
SIF OUT
100K
10
1
1/16W EN VOUT
IF AGC
MAIN-04 Active "H"
GND
GND
SCL
AFT
SDA
GND
GND
USB-PWRFLT1
DMCORE
NC
NC
NC
5V
2
23 25 FAULT VIN
9
NC
NC
USB-OFF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 MAIN-01
DCDC/JACK
8
VLOIN VOUT
C1A03 C1A06
IF-
IF+
0.1 4700
25V/16V 50V C1B01
10uF
7
GND VIN 6.3V
C1A04 C1A07
100 10
6
16V 50V ILIM VBIAS
TUNER-IF-P
R1B04 C1B02
390 0.1
TUNER-IF-N 1/16W 25V/16V
MAIN-04
TUNER-IFAGC
R1A09
100
DMCORE
1/16W TUNER-SDA-M0
R1A10
L1A02 100
N-220 ohm 1/16W TUNER-SCL-M0 IC1B02
AVF16C225A000F405
TUNER-RFAGC
6 5 4
L1A04
10MH
AVF
VARISTOR
L1B01
N-220 ohm
UB
1 2 3
C1B05 +5V
C1B04 1
100 0.1
L1B03
16V DLW21SN900SQ2 25V/16V
USB-DM1 D-
4 3 2
MAIN-04
DMCORE
USB-DP1 1 2 D+
3
MAIN-01 30VSL
DCDC/JACK TO FRONT USB
UB
L1B02 GND
N-220 ohm 4
MAIN-01 5VS
DCDC/JACK G
PIN Signal Assignment
V41+ ONLY
1 T.M.D.S. Data 2+
2 T.M.D.S. Data 2 Shield
3 T.M.D.S. Data 2- *R2A43

10
1/10W
4 T.M.D.S. Data 1+
*C2A48
5 T.M.D.S. Data 1 Shield *D2A41 1U
MAZ8051GHL 10V/16V
*R2A44 *R2A45
6 T.M.D.S. Data 1- 47K 47K
1/16W 1/16W
1
7 T.M.D.S. Data 0+
3
2
2
8 T.M.D.S. Data 0 Shield
23
22
T.M.D.S. Data 0- *D2A42 *D2A43
G
9 *R2A47
MC2850-T111-1 MC2850-T111-1 56
1/16W
10 11 12 13 14 15 16 17 18 19
10 T.M.D.S. Clock+
*C2A49
0.22
11 T.M.D.S. Clock Shield 25V/16V
*R2A41
100
12 T.M.D.S. Clock- 1/16W
13 CEC
*R2A42
100
14 Reserve 1/16W
HDMI_CEC *VR2A41
15 DDC Clock
R0XCN
16 DDC Data R2A17 1 6
*J2A04
56
1/16W
AVF
17 Ground (return for +5V, R0XCP 2 VARISTOR 5
R0X0N
3
9
18 +5V Power 4
8
R2A13
19 Hot Plug Detect 10
R0X0P
1/10W
7
Shell FG C2A18 R0X1N
*VR2A42
6
D2A11 1U
MAZ8051GHL 10V/16V
(20) Location Post (GND)
5
1 6
R0X1P
4
(21) Location Post (GND) AVF
2 VARISTOR 5
R0X2N
3
(22) Location Post (GND) 3 4
2
1
(23) Location Post (GND) R2A14

47K
R2A15
47K R0X2P *VR2A43
1
3
1/16W 1/16W
2
21
G
D2A12
20
1 6
MC2850-T111-1
AVF
2 VARISTOR 5
C2A19
0.22 3 4
25V/16V
23
22
G
*VR2A44
3
10 11 12 13 14 15 16 17 18 19
D2A13 1 6
MC2850-T111-1
AVF
R2A11 2 VARISTOR 5
100 HDM1CLK-
DDC1DA 1/16W
VR2A11 3 4
HDM1CLK+
DDC1CL
HDM1D0-
1/16W
1 6
HDM1D0+ MAIN-04
100
R2A12
HDM1D1-
DM-CORE
HDMI_CEC AVF
2 VARISTOR 5 HDM1D1+
R1XCN
HDM1D2-
3 4
HDM1D2+
J2A01
C2A05
VR2A12 0.1
25V/16V
R1XCP
TPWR_CI2CA
C2A01
R1X0N
1
9
6 10uF
6.3V
ROX2P
AVF
8
R2A06
2 VARISTOR 5 4.7K
R1X0P 1/16W
7
R2A07
3 4 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 4.7K
R1X1N 1/16W
6
ROX2N
ROX1P
R0X1N
R0X0P
R0X0N
R0XCP
R0XCN
VCC33
TXCN
TXCP
TX0N
TX0P
TX1N
TX1P
TX2N
TX2P
R1XCN 1
CSCL54
5
2 CSDA 53
R1X1P R1XCP
VR2A13
4
3 R1X0N INT 52
R1X2N
3
4 R1X0P CEC_D 51
1 6
2
5 R1X1N CEC_A 50
R1X2P AVF
2
1
VARISTOR 5
6 R1X1P IC2A01 R4PWR5V 49
G
21
G
20
3 SiI9287CNU R2A02
4 0
7 R1X2N DSCL4 48 1/16W
8 R1X2P DSDA4 47
VR2A14
9 VCC33 ePAD R3PWR5V 46
1 6 73
C2A02 10 RSVD CBUS_HPD3 45
0.1
AVF 25V/16V DSCL3 44
2 VARISTOR 5 11 R2XCN
R2A01
0
1/16W 12 R2XCP DSDA3 43
L2A91 3 4
N-600 ohm
13 R2X0N R2PWR5V 42 3.3VSL MAIN-01
5VSL
14 R2X0P CBUS_HPD2 41 DCDC/JACK
C2A91 C2A92
0.1 L2A01
MAIN-01 100
16V
25V/16V
15 R2X1N DSCL2 40
N-600 ohm
CBUS_HPD0
DCDC/JACK 16 R2X1P DSDA2 39
R0PWR5V
L2A92
N-220 ohm 17 SBVCC 38
R3XCN
R3XCP
R3X0N
R3X0P
R3N1N
R3X1P
R3X2N
R3X2P
VCC33
DSDA0
DSCL0
DSDA1
DSCL1
3.3VS R2X2N
RSVD
C2A06 HDMISW-SCL
18 VOUT33 37
C2A94 R2A23 R2X2P 0.1 C2A07 HDMISW-SDA
0.1 10 25V/16V
10uF
25V/16V 1/10W 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 6.3V
CBUS_HPD1
R1PWR5V
HDMI-INT
C2A28 CEC
D2A21 1U
C2A03
C2A12 MAIN-10
MAZ8051GHL 10V/16V 10uF C2A04 1U
6.3V 0.1
25V/16V
10V/16V
HDMI-DET[3] MICRO
HDMI-DET[2]
R2A27 HDMI-DET[1]
56
1/16W HDMI-DET[0]
C2A08 C2A09 C2A10 C2A11
10uF 10uF 10uF 10uF
6.3V 6.3V 6.3V 6.3V
1
3
2
D2A22
MC2850-T111-1
VR2A21
3R3XCN
C2A29 3R3XCP
0.22
1 6 2R2XCN
25V/16V
3R3X0N
1
AVF 3R3X0P
2 5
3
VARISTOR
23
22
2
G
3R3X1N
G
D2A23 2R2XCP 3R3X1P

3 4
MC2850-T111-1 IC2A51
10 11 12 13 14 15 16 17 18 19
3R3X2N
3R3X2P PST8428NR
R2A24
47K
1/16W R2A25
47K 1 5
R2A21 1/16W OUT NC
100
1/16W
VR2A22 C2A51
DDC2DA 330
2 VDD 50V
DDC2CL 2R2X0N
1 6 D2A51
1/16W 3 GND NC 4
100 MC2850-T111-1
R2A22 AVF
2 VARISTOR 5
1
HDMI_CEC
3
3 4 2R2X0P
VR2A34
2
R2XCN VR2A32 VR2A33 C2A53
6 5 4 6 5 4 6 5 4 0.1
J2A02
6 5 4 R2A57
25V/16V 1.5K
1/16W
R2XCP
VR2A23 AVF
R2X0N
VR2A31 AVF
AVF AVF
VARISTOR
Q2A54
2SB1424T100R
VARISTOR VARISTOR Q2A51
9
VARISTOR R2A51
10K R2A53 Q2A52 R2A58
1 6 2R2X1N 1/16W RT1N436C-T112-1 10K ISA1235AC1-T112A-1E,1F 180
R2A52
8
10K 1/16W 1/16W

AVF 1/16W
R2X0P 2 5 1 2 3
VARISTOR
7
1 2 3 1 2 3 C2A52
1 2 3 R2A55
1000 10K
R2X1N 50V Q2A53
2R2X1P
6
3 4 1/16W
2SC3052-T112-1E,F
VR2A24
5
R2A54 R2A56
100K 10K
R2X1P 1/16W 1/16W
4
1 6 2R2X2N
R2X2N
3
AVF
2 VARISTOR 5
2
R2X2P 2R2X2P
3
1
4
G
21
G
20
D2A32
MC2850-T111-1 D2A33
MC2850-T111-1
1
1
3
3
R2A35 R2A34
2
2
47K 47K
1/16W 1/16W
R2A33
10
1/10W
R2A37
C2A38 56
1U D2A31 1/16W
10V/16V MAZ8051GHL
HDMI_CEC
R3XCN
R3XCP
R3X0N
R3X0P
R3X1N
R3X1P
R3X2N
R3X2P
C2A39
0.22
25V/16V
R2A31
100 R2A32
1/16W 100
1/16W
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 G
G
23 21
J2A03
22
G 20
G
HDMI CONNECTOR
D1.8V_BCM3549 D1.2V_BCM3549 D3.3V_BCM3549
DDR_VREF
C4A09 C4A10 C4A11 C4A12 C4A13 C4A14 C4A15 C4A16 C4A17 C4A18 C4A19 C4A20 C4A22 C4A24 C4A25 C4A26 C4A27 C4A28 C4A29 C4A30 C4A31 C4A32 C4A33 C4A34 C4A35 C4A36 C4A37 C4A40 C4A41 C4A42 C4A43 C4A44 C4A45
0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000 0.1 0.01 1000
A1.2V_BCM3549 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V 25V/16V 25V/50V 50V
MAIN-05
DMMEM (LVDS OUTPUT)
R4A22
3.3K
1/16W IC4A01
PST8428NR
MAIN-01 1 RST CD 5
DCDC/JACK
(DDR2-SDRAM)
3.3VS VCC
2
MAIN-05
MAIN-06 GND NC
LVDS1-D0P
LVDS0-D3P
LVDS0-D1P
LVDS0-D0P
LVDS0-D0N
LVDS0-D2N
LVDS1-D0N
LVDS0-D3N
LVDS0-D4P
LVDS0-D1N
LVDS1-D2N
LVDS1-D2P
LVDS0-D4N
LVDS0-CLKP
LVDS0-D2P
LVDS1-CLKN
LVDS1-CLKP
LVDS0-CLKN
LVDS1-D3N
LVDS1-D3P
LVDS1-D1P
LVDS1-D4N
LVDS1-D4P
LVDS1-D1N
DDR0_DQ[0]
DDR0_DQ[2]
DDR0_DQ[5]
DDR0_DQ[8]
DDR0_DQ[13]
DDR0_DQ[15]
DDR0_DQSN[0]
DDR0_DQ[7]
DDR0_DQ[10]
DDR0_DQSN[1]
DDR0_DM[0]
DDR0_DQS[0]
DDR0_DM[1]
DDR0_DQ[14]
DDR0_DQ[9]
DDR0_DQS[1]
DDR0_DQ[1]
DDR0_DQ[6]
DDR0_DQ[3]
DDR0_DQ[4]
DDR0_DQ[11]
DDR1_CLKN
DDR0_CLK
DDR0_CLKN
DDR0_A[5]
DDR0_DQ[12]
DDR1_CLK
DDR01_A[11]
DDR01_A[12]
DDR0_A[4]
DDR0_A[6]
DDR01_A[9]
DDR01_A[7]
DDR01_A[10]
DDR01_A[1]
DDR01_A[8]
DDR01_A[0]
DDR1_A[5]
DDR01_A[3]
DDR01_BA[2]
DDR1_A[4]
DDR01_BA[1]
DDR01_RASN
DDR1_A[6]
DDR01_ODT
DDR01_BA[0]
DDR01_CASN
DDR01_WEN
DDR1_DQ[15]
DDR1_DQ[13]
DDR1_DQ[2]
DDR1_DQ[5]
DDR1_DQ[0]
DDR1_DQ[7]
DDR1_DQ[8]
DDR1_DQ[10]
DDR1_DQS[0]
DDR1_DQSN[0]
DDR1_DQSN[1]
DDR1_DQS[1]
DDR1_DM[1]
DDR1_DQ[6]
DDR1_DQ[1]
DDR1_DQ[3]
DDR1_DQ[4]
DDR1_DQ[12]
DDR01_A[13]
DDR01_A[2]
DDR01_CKE
DDR1_DM[0]
DDR1_DQ[11]
DDR1_DQ[9]
DDR1_DQ[14]
3 4 DDR_VREF NAND_ALE
3.3VS
DMMEM (PD) MAIN-04
ROM/EBI PON-RSTN
C4A06
A1.2V_BCM3549
R4A95 NAND_DATA[0-7] DM-CORE
0.01 2.7K
1/16W
25V/50V
MAIN-10
MICRO R4A96
2.7K
1/16W
NAND_DATA[7]
R4A97 (PD)
2.7K
1/16W
R4A12 R4A18
1/16W
1/16W
1/16W
2.7K 2.7K
1/16W 1/16W NAND_DATA[6]
R4A44 R4A98 (PD)
240 2.7K
1K
1K
1K
1/16W 1/16W
NAND_DATA[5]
R4A03
R4A06
R4A07
R4A99 (PD)
2.7K
1/16W
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28
NAND_DATA[4]
R4B01 (PD)
R4A09 100 2.7K
1/16W 1/16W
C4A01 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28
R4A10 100 1000 NAND_DATA[3]
1/16W 50V
R4A88 (PD)
2.7K
1/16W
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24 C25 C26 C27 C28 NAND_DATA[2]
R4A11 100 (PD)
1/16W R4B03
2.7K
1/16W
NAND_DATA[1]
D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 R4A90 (PD)
2.7K
1/16W
R4A02
1/16W
MAIN-06
1K
NAND_DATA[0]
C4A08
ROM/EBI (PD)
10uF E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21 E22 E23 E24 E25 E26 E27 E28
6.3V
Boot strap options
A2.5V_BCM3549
MAIN-05 A2.5V_BCM3549 R4A33
DMMEM A1.2V_BCM3549 3.3K
1/16W
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 F25 F26 F27 F28
EBI_CS0N
R4A53
0
1/16W
R4B17
22 G1 G2 G3 G4 G5 G6 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G18 G19 G20 G21 G22 G23 G24 G25 G26 G27 G28 EBI_ADDR[0]
MAIN-07 ASIC-RSTN 1/16W EBI_ADDR[1]
ASIC EBI_ADDR[2]
EBI_WE1N
R4A28
H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H18 H19 H20 H21 H22 H23 H24 H25 H26 H27 H28
10K EBI_ADDR[3] 3.3VS
1/16W
R4A29
10K
1/16W
R4A91 R4A94
J1 J2 J3 J4 J5 J6 J7 J8 J21 J22 J23 J24 J25 J26 J27 J28 1.5K 1.5K
1/16W 1/16W
IC4A02 DMPWRGDN MAIN-10
MICRO R4A74
100
1/16W
K1 K2 K3 K4 K5 K6 K7 K8 K21 K22 K23 K24 K25 K26 K27 K28 R4A75

100
IN2Y-DET 1/16W
IN1PB-DET
MAIN-01 IN1Y-DET
DCDC/JACK IN3PB-DET D4A07 D4A08
L1 L2 L3 L4 L5 L6 L7 L8 L11 L12 L13 L14 L15 L16 L17 L18 L21 L22 L23 L24 L25 L26 L27 L28 MALS068X0L MALS068X0L
IN2PB-DET
IN3Y-DET C4A57
1U
10V/16V
M1 M2 M3 M4 M5 M6 M7 M8 M11 M12 M13 M14 M15 M16 M17 M18 M21 M22 M23 M24 M25 M26 M27 M28
PLL_RAP_AVD_AVDD1P2V DM-TVRST
MAIN-05 A1.2V_BCM3549 MAIN-06
DMMEM RST-UART
ROM/EBI
N1 N2 N3 N4 N5 N6 N7 N8 N11 N12 N13 N14 N15 N16 N17 N18 N21 N22 N23 N24 N25 N26 N27 N28
A2.5V_BCM3549
MAIN-05
DMMEM A1.2V_BCM3549
P1 P2 P3 P4 P5 P6 P7 P8 P11 P12 P13 P14 P15 P16 P17 P18 P21 P22 P23 P24 P25 P26 P27 P28
D3.3V_BCM3549
MAIN-05
MAIN-05 PLL_DS_AVDD1P2V DMMEM
D1.2V_BCM3549
DMMEM
USB-PWRFLT1 R1 R2 R3 R4 R5 R6 R7 R8 R11 R12 R13 R14 R15 R16 R17 R18 R21 R22 R23 R24 R25 R26 R27 R28
DM-RST MAIN-06
A1.2V_BCM3549
MAIN-05 ROM/EBI
R4A61 3.3K
R4A63 3.3K
3.3K
R4A21 3.3K
A3.3V_BCM3549
DMMEM
1/16W
1/16W
1/16W
1/16W
NAND_WEN
NAND_ALE
R4A20
T1 T2 T3 T4 T5 T6 T7 T8 T11 T12 T13 T14 T15 T16 T17 T18 T21 T22 T23 T24 T25 T26 T27 T28
USB-PWRON1 NAND_DATA[2]
A2.5V_BCM3549 NAND_DATA[1] TUNER-SDA-M0 MAIN-02
MAIN-05 A2.5V_BCM3549 NAND_CLE TUNER-SCL-M0
DMMEM NAND_CS0N TUNER/IO
NAND_REN
U1 U2 U3 U4 U5 U6 U7 U8 U11 U12 U13 U14 U15 U16 U17 U18 U21 U22 U23 U24 U25 U26 U27 U28
MAIN-05 NAND_DATA[4]
DMMEM USB_AVDD1P2PLLV NAND_DATA[3] BSC-M1-SCL MAIN-09
NAND_RBN BSC-M1-SDA
NAND_DATA[0] AUDIO
R4A26
SF_MOSI
C4A07
100 3.9K V1 V2 V3 V4 V5 V6 V7 V8 V11 V12 V13 V14 V15 V16 V17 V18 V21 V22 V23 V24 V25 V26 V27 V28 NAND_DATA[7]
1/16W USB-DM1 NAND_DATA[6] TP-KNUART_TXD1
50V
USB-DP1 NAND_DATA[5]
1
R4A27 R4A30
10K R4A92
120 SF_CSN 100 TP-KNUART_RXD1
1/16W R4A31
1/16W SF_SCK 1/16W
1
10K
1/16W
W1 W2 W3 W4 W5 W6 W7 W8 W21 W22 W23 W24 W25 W26 W27 W28
L4A06
N-600 ohm
D4A04 D4A03
R4A35 68 R4A39 430 MALS068X0L MALS068X0L
A2.5V_BCM3549 1/16W 1/16W SF_MISO MAIN-04 MAIN-06 C4A55
0.1
GP30_UART_TXD_1 R4A59 33 1/16W Boot St. ROM/EBI 25V/16V
Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y21 Y22 Y23 Y24 Y25 Y26 Y27 Y28
GP31_UART_RXD_1
R4A60 33 1/16W
MAIN-05 A3.3V_BCM3549 GP16_UART_TXD_0
A1.2V_BCM3549 GP15_UART_RXD_0
DMMEM
AA1 AA2 AA3 AA4 AA5 AA6 AA7 AA8 AA9 AA10 AA11 AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AA24 AA25 AA26 AA27 AA28
A1.2V_BCM3549 UART-INTA
MAIN-06
ROM/EBI
R4A80
10K AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 AB24 AB25 AB26 AB27 AB28
1/16W
PLL_MAIN_AVDD1P2V
R4A81
10K MAIN-05
1/16W R4A50
1/16W
0 DMMEM
HDM1CLK- AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 AC14 AC15 AC16 AC17 AC18 AC19 AC20 AC21 AC22 AC23 AC24 AC25 AC26 AC27 AC28
HDM1CLK+
A2.5V_BCM3549 CLK54_XTAL_P
5
R4A37 68 R4A40 430 CLK54_XTAL_N
MAIN-05 HDMI_0_PLL_VDD1P2V 1/16W 1/16W UART_TXD_0
Factory Use Only

A2.5V_BCM3549
DMMEM HDM1D0-
R4A93
100
AD1 AD2 AD3 AD4 AD5 AD6 AD7 AD8 AD9 AD10 AD11 AD12 AD13 AD14 AD15 AD16 AD17 AD18 AD19 AD20 AD21 AD22 AD23 AD24 AD25 AD26 AD27 AD28 R4A65 1/16W UART_RXD_0
HDM1D0+ A2.5V_BCM3549 MAIN-05 1.2K
2
1/16W D4A05
RG
HDMI_0_RXVDD3P3V A1.2V_BCM3549
DMMEM L4A01 MC2850-T111-1
2
1% MLF2012A2R7J
GND
3
R4A51 2.7K C4A47
3
1/16W R4A66
33
1
1.2K
1/16W 50V
HDM1D1- AE1 AE2 AE3 AE4 AE5 AE6 AE7 AE8 AE9 AE10 AE11 AE12 AE13 AE14 AE15 AE16 AE17 AE18 AE19 AE20 AE21 AE22 AE23 AE24 AE25 AE26 AE27 AE28
HDM1D1+ 3.3V
1%
4
A1.2V_BCM3549 A1.2V_BCM3549
MAIN-05 R4A62
22 X4A01
R4A69
22
D4A06
MC2850-T111-1
DMMEM
6
A2.5V_BCM3549 1/16W 1/16W
HC-49/U 54.000MHZ
2
MAIN-05
3
R4A49
AUDMX_INCM1
HDM1D2- AF1 AF2 AF3 AF4 AF5 AF6 AF7 AF8 AF9 AF10 AF11 AF12 AF13 AF14 AF15 AF16 AF17 AF18 AF19 AF20 AF21 AF22 AF23 AF24 AF25 AF26 AF27 AF28 2.7K
1
1/16W
HDM1D2+ DMMEM C4A46 C4A48 ASIC-CLK
C4A89
0.47
VCXO_AVDD1P2V 12 12
50V
ASIC-DTOM MAIN-07
50V
10V ASIC-MTOD ASIC
A2.5V_BCM3549 ASIC-CS
AUDMX_INCM1
R4B20
1/16W
R4B21
SF_MISO 1/16W
R4B22
SF_MOSI 1/16W
R4B23
1/16W
AUDMX_INCM2 R4A55
22
22
22
22
R4A82 AG1 AG2 AG3 AG4 AG5 AG6 AG7 AG8 AG9 AG10 AG11 AG12 AG13 AG14 AG15 AG16 AG17 AG18 AG19 AG20 AG21 AG22 AG23 AG24 AG25 AG26 AG27 AG28 220
C4A90 10K 1/16W TUNER-IFAGC MAIN-02
0.47 AUDIO INCM 1/16W
10V C4A38
TUNER/IO
SF_SCK
SF_CSN
AUDMX_INCM2 0.1
16V
AUDMX_INCM3
C4A91
0.47
AH1 AH2 AH3 AH4 AH5 AH6 AH7 AH8 AH9 AH10 AH11 AH12 AH13 AH14 AH15 AH16 AH17 AH18 AH19 AH20 AH21 AH22 AH23 AH24 AH25 AH26 AH27 AH28
(SERIAL FLASH)
10V
MAIN-02
AUDMX_INCM4
TUNER/IO R4A57
2.2K
C4A92
0.47 R4A41
1/16W TUNER-RFAGC MAIN-02
MAIN-03
25V/50V
10V 33 C4A39
HDMI 1/16W TUNER/IO
C4A23
0.01
R4A46 0.01
0 25V/50V
1/16W
R4A70 R4A72 R4A78
0 0 0
PLL_VAFE_AVDD1P2V
1/16W 1/16W 1/16W
C4A21 0.1
R4A36 TUNER-IF-N
POR_OTP_VDD2P5V
R4A43
SD_V2_AVDD2P5V
SD_V2_AVDD2P5V
SD_V2_AVDD2P5V
75 560
25V/16V
R4A47
SD_INCM_CVBS1
SD_INCM_CVBS2
A1.2V_BCM3549
SD_INCM_CVBS3
SD_INCM_CVBS4
SD_INCM_COMP3
SD_INCM_COMP1
SD_INCM_COMP2
A2.5V_BCM3549
A1.2V_BCM3549
VDAC_AVDD3P3V
AUDMX_LDO_CAP
A2.5V_BCM3549
A2.5V_BCM3549
0 1/16W 1/16W
AUDMX_INCM4
AUDMX_INCM3
1/16W
EDSAFE_AVDD2P5
SPDIF-OUT
AGC_VDDOV
MAIN-05 MAIN-02
R4A45 DMMEM
0
1/16W R4A71 R4A73 R4A79 TUNER/IO
0 0 0
1/16W 1/16W 1/16W TUNER-IF-P
I2S-OUT-DATA
I2S-OUT-CLK
DCDC/JACK
MAIN-05
I2S-OUT-LR
MAIN-01
DMMEM
C4A67
1U
C4A66
1U
C4A61
C4A63
C4A65
C4A76
C4A79
C4A82
MAIN-09
AUDIO
0.1
16V
0.1
16V
0.1
16V
MAIN-05
1U
1U
1U
DMMEM
C4A73
C4A75
C4A78
C4A81
C4A60
C4A62
C4A64
0.1
16V
0.1
16V
0.1
16V
0.1
16V
C4A70
C4A72
C4A74
C4A77
C4A80
1U
1U
1U
0.1
16V
0.1
16V
0.1
16V
0.1
16V
0.1
16V
INPUT2-R
INPUT3-R
INPUT1-R
INPUT2-L
INPUT3-L
INPUT1-L
DVI-R
INPUT3PB
INPUT3PR
INPUT1PB
INPUT1PR
INPUT2PR
INPUT2PB
DVI-L
INPUT1Y
INPUT2Y
INPUT3Y
INPUT3Y
INPUT1Y
INPUT2Y
MAIN-01 MAIN-01
DCDC/JACK DCDC/JACK
MAIN-04
DMCORE
D1.8V_BCM3549 L4G25
68MH
3.3VS
C4F07 C4F22
100 100
16V
16V IC4F01 C4G27 C4G35
2.2U MAIN-04
NT5TU64M16DG-AC IC4F03 MAIN-01 A1.2V_BCM3549
100
16V 6.3V
NT5TU64M16DG-AC DMCORE
DCDC/JACK
A2.5V_BCM3549
A1 A2 A3 A7 A8 A9 A1 A2 A3 A7 A8 A9
DDR0_DQSN[1] DDR1_DQSN[1]
DDR0_DQ[8] DDR0_DQ[12] DDR1_DQ[12] DDR1_DQ[8] A3.3V_BCM3549

B1 B2 B3 B7 B8 B9 B1 B2 B3 B7 B8 B9
DDR0_DM[1] DDR0_DQS[1] DDR1_DM[1] DDR1_DQS[1]
AGC_VDDOV
C1 C2 C3 C7 C8 C9 C1 C2 C3 C7 C8 C9
DDR0_DQ[13] DDR0_DQ[9] DDR1_DQ[11] DDR1_DQ[10] (AUDMX_AVDD2P5)
AUDMX_LDO_CAP
DDR0_DQ[10] DDR0_DQ[11] DDR1_DQ[14] DDR1_DQ[13] (AUD_VDDO2P5_0)
D1 D2 D3 D7 D8 D9 D1 D2 D3 D7 D8 D9
(AUD_AVDD2P5_1)
DDR0_DQ[15] DDR0_DQ[14] DDR1_DQ[9] DDR1_DQ[15] (AUD_AVDD2P5_2)
(CLK54_AVDD1P2)
E1 E2 E3 E7 E8 E9 E1 E2 E3 E7 E8 E9
DDR0_DQSN[0] DDR1_DQSN[0] (CLK54_AVDD2P5)
(DDR0_BVDDO)
DDR0_DQ[2] DDR0_DQ[5] DDR1_DQ[6] DDR1_DQ[4] (DDR1_BVDDO)
F1 F2 F3 F7 F8 F9 F1 F2 F3 F7 F8 F9
DDR0_DM[0] DDR0_DQS[0] DDR1_DM[0] DDR1_DQS[0]
G1 G2 G3 G7 G8 G9 G1 G2 G3 G7 G8 G9
DDR0_DQ[0] DDR0_DQ[7] DDR1_DQ[3] DDR1_DQ[1]
DDR0_DQ[1] DDR0_DQ[3] DDR1_DQ[2] DDR1_DQ[0]

H1 H2 H3 H7 H8 H9 H1 H2 H3 H7 H8 H9
L4F01 DDR0_DQ[6] DDR0_DQ[4] L4F02 DDR1_DQ[5] DDR1_DQ[7] C4G20 C4G36 C4G52
N-600 ohm N-600 ohm C4G28 C4G44 C4G59 C4G71 C4G77 C4G80 C4G84 C4G88 C4G90
R4F01 100 R4F14 100 10uF 10uF 10uF
J1 J2 J3 J7 J8 J9 1/16W J1 J2 J3 J7 J8 J9 1/16W 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
6.3V 25V/16V 6.3V 25V/16V 6.3V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V
C4F04 DDR0_CLK C4F21 DDR1_CLK
C4F03 0.1 DDR01_CKE DDR01_ODT C4F20 0.1 DDR01_CKE DDR01_ODT
1U 25V/16V K2 K3 K7 K8 K9 1U 25V/16V K2 K3 K7 K8 K9
DDR01_WEN DDR0_CLKN DDR01_WEN DDR1_CLKN
10V/16V DDR01_RASN R4F02 10V/16V
DDR01_RASN R4F15
1/16W 0 1/16W 0
DDR01_BA[2] L2 DDR01_BA[2] L2
L1 L3 L7 L8 L1 L3 L7 L8
DDR01_BA[0] DDR01_BA[0]
DDR01_BA[1] DDR01_CASN DDR01_BA[1] DDR01_CASN
M2 M3 M7 M8 M9 M2 M3 M7 M8 M9
DDR01_A[10] DDR01_A[0] DDR01_A[10] DDR01_A[0]
DDR01_A[1] DDR01_A[2] DDR01_A[1] DDR01_A[2]
N1 N2 N3 N7 N8 N1 N2 N3 N7 N8
DDR01_A[3] DDR0_A[4] DDR01_A[3] DDR1_A[4] (LVDS_AVDDC1P2)
DDR0_A[5] DDR0_A[6] DDR1_A[5] DDR1_A[6] (LVDS_TX_AVDD2P5_1)
(LVDS_TX_AVDD2P5_2)
P2 P3 P7 P8 P9 P2 P3 P7 P8 P9
DDR01_A[7] DDR01_A[8] DDR01_A[7] DDR01_A[8] L4G09
DDR01_A[9] DDR01_A[11] DDR01_A[9] DDR01_A[11] N-600 ohm
DDR01_A[13] DDR01_A[13] PLL_DS_AVDD1P2V
R1 R2 R3 R7 R8 R1 R2 R3 R7 R8
DDR01_A[12] DDR01_A[12] (EDSAFE_DVDD1P2)
L4G10
N-600 ohm
C4F08 C4F23 EDSAFE_AVDD2P5
0.01 0.01
25V/50V 25V/50V
C4G29 C4G53 C4G72 C4G85
C4G21 C4G37 C4G45 C4G60 C4G66 C4G81
10uF 10uF 10uF 10uF
0.1 0.1 0.1 0.1 0.1 0.1
25V/16V 6.3V 25V/16V 25V/16V 6.3V 25V/16V 25V/16V 6.3V 25V/16V 6.3V
(HDMI_1_RXVDD2P5)
(HDMI_0_RXVDD2P5)
R4F03
1/16W 68-JX4 RM1608X4 (3216) L4G11
R4F08 68 N-600 ohm
1/16W DDR0_A[4] HDMI_0_PLL_VDD1P2V
1 8
R4F09 68
C4F17 DDR01_CKE C4F24 1/16W DDR0_A[5] (HDMI_0_RXVDD1P2)
0.1 2 7 0.1 (HDMI_0_RXVDD2P5)
R4F10 68
25V/16V DDR01_BA[2] 25V/16V 1/16W DDR0_A[6] L4G12
MAIN-03
3 6 N-600 ohm
R4F11 68
1/16W
HDMI
DDR01_BA[0] DDR1_A[4] HDMI_0_RXVDD3P3V
4 5
A1.2V_BCM3549
R4F04 R4F06 (HDMI_1_PLL_VDD1P2)
1/16W 68-JX4 RM1608X4 (3216) 1/16W 68-JX4 RM1608X4 (3216) (HDMI_1_RXVDD1P2)
(HDMI_1_RXVDD2P5)
DDR01_A[10] DDR01_RASN
1 8 1 8
C4F18 DDR01_A[3] C4F25 DDR01_CASN A3.3V_BCM3549
MAIN-04 DDR_VREF 0.1 2 7 0.1 2 7
25V/16V 25V/16V
DMCORE DDR01_A[7] DDR01_A[2] C4G22 C4G61
3 6 3 6 C4G30 C4G38 C4G46 C4G54 C4G73 C4G82 C4G86
10uF 10uF
0.1 1000 0.1 0.1 0.1 0.1 0.1
C4F01 C4F02 C4F06 C4F05 DDR01_A[12] DDR01_A[11] 6.3V 25V/16V 50V 25V/16V 25V/16V 6.3V 25V/16V 25V/16V 25V/16V
1U 470 1U 470 4 5 4 5
10V/16V 50V 10V/16V 50V
L4G08 R4F05 R4F07

IC4F02
N-220 ohm 1/16W 68-JX4 RM1608X4 (3216) 1/16W 68-JX4 RM1608X4 (3216)
MAIN-01 LP2996LQNOPB
3.3VS
DCDC/JACK DDR01_A[9] DDR01_A[13]
1 8 1 8
4 3 2 1 C4F19 DDR01_A[1] C4F26 DDR01_A[8]
0.1 2 7 0.1 2 7
L4G15
SD
NC
GND
NC
25V/16V 25V/16V N-600 ohm
DDR01_BA[1] DDR01_A[0]
5 16 3 6 3 6 PLL_MAIN_AVDD1P2V
VSENSE NC
DDR01_WEN DDR01_ODT (SD_V_AVDD1P2)
6 NC VTT 15 4 5 4 5
17 L4G16
N-600 ohm
7 VREF DGND VTT 14
SD_V1_AVDD2P5V
D1.8V_BCM3549 R4F12
PVIN
PVIN
AVIN
8 VDDQ C4F16 C4F52 L4G07
NC 13 220
1/16W 68
DDR1_A[5] N-220 ohm
NC
0.1
C4F10 C4F11 C4F12 4V SD_V2_AVDD2P5V
C4F09 25V/16V
100 10uF 0.1 220 9 10 11 12 R4F13 (SD_V3_AVDD2P5)
16V 6.3V 25V/16V 50V 1/16W 68
DDR1_A[6] (SD_V4_AVDD2P5)
L4G17
C4F31 N-600 ohm
C4F14 C4F13 0.1 PLL_VAFE_AVDD1P2V
1U 470 25V/16V
10V/16V 50V L4G18
C4F15 N-600 ohm
0.1 POR_OTP_VDD2P5V
25V/16V
C4G31 C4G58 C4G83

C4G23 C4G39 C4G47 C4G51 C4G64 C4G70 C4G76 C4G79 C4G87
10uF 10uF 10uF
0.1 0.1 1000 0.1 1000 0.1 1000 0.1 0.1
25V/16V 6.3V 25V/16V 50V 25V/16V 6.3V 50V 25V/16V 50V 25V/16V 6.3V 25V/16V
L4G01
N-220 ohm
1.8VS D1.8V_BCM3549
C4G01 C4G06 C4G11

100 2.2U 0.1
16V 6.3V 25V/16V
L4G02
N-220 ohm (SPDIF_AVDD2P5)
D1.2V_BCM3549
MAIN-04 L4G19
N-600 ohm
DMCORE C4G02 C4G07 C4G12 C4G91 C4G92 VCXO_AVDD1P2V
100 2.2U 0.1 0.1 0.1
LVDS OUT FROM BCM3549 16V 6.3V 25V/16V 25V/16V 25V/16V
(VDAC_AVDD1P2)
T4G01 (VDAC_AVDD2P5)
DLP2ADN900HL4 L4G20
LVDS_TX0_D0_N N-600 ohm
LVDS0-D0N 8 1 VDAC_AVDD3P3V
LVDS_TX0_D0_P
LVDS0-D0P 7 2
L4G03 C4G24 C4G48 C4G74
LVDS_TX0_D1_N N-220 ohm C4G32 C4G40 C4G55 C4G62 C4G68
LVDS0-D1N 6 3 10uF 10uF 10uF
1.2VS A1.2V_BCM3549 0.1 0.1 0.1 0.1 0.1
6.3V 25V/16V 25V/16V 6.3V 25V/16V 25V/16V 25V/16V 6.3V
LVDS_TX0_D1_P
LVDS0-D1P 5 4 C4G03 C4G08 C4G13 C4G93 C4G94
100 2.2U 0.1 0.1 0.1
16V 6.3V 25V/16V 25V/16V 25V/16V
T4G02
DLP2ADN900HL4
LVDS0-D2N 8 1 LVDS_TX0_D2_N
L4G21
LVDS0-D2P 7 2 LVDS_TX0_D2_P
L4G04
N-220 ohm
3.3VS TO 2.5VS N-600 ohm
USB_AVDD1P2PLLV
LVDS0-CLKN 6 3 LVDS_TX0_CLK_N (USB_AVDD12)
(USB_AVDD2P5)
LVDS0-CLKP LVDS_TX0_CLK_P C4G17
5 4 10uF (USB_AVDD2P5REF)
L4G05
N-220 ohm 6.3V (USB_AVDD33)
D3.3V_BCM3549
C4G33
C4G04 C4G09 C4G14
8 7 6 5 C4G25 C4G49 C4G56
10uF
T4G03 2.2U 0.1 0.1 0.1
Cont
100
Vin
0.1
NC
NC
6.3V 25V/16V 6.3V 25V/16V 25V/16V
DLP2ADN900HL4 16V 25V/16V
LVDS0-D3N 8 1 LVDS_TX0_D3_N IC4G01

MM1662FHBE
Vout
GND
LVDS0-D4N LVDS_TX0_D4_N
Cn
6 3
NC
L4G06
N-220 ohm
LVDS0-D4P 5 4 LVDS_TX0_D4_P A3.3V_BCM3549 1 2 3 4
C4G05 C4G10 C4G15 A2.5V_BCM3549
100 2.2U 0.1
16V 6.3V 25V/16V C4G16
2.2U C4G18
T4G04 22
6.3V
DLP2ADN900HL4 6.3V
LVDS1-D0N 1 8 LVDS_TX1_D0_N A1.2V_BCM3549

C4G19
470
LVDS1-D0P LVDS_TX1_D0_P 50V
2 7
A1.2V_BCM3549
LVDS1-D1P 4 5 LVDS_TX1_D1_P A2.5V_BCM3549

L4G24
N-600 ohm
PLL_RAP_AVD_AVDD1P2V
T4G05 MAIN-01
D1.8V_BCM3549 D1.8V_BCM3549 C4G26
DLP2ADN900HL4 C4G34 C4G50 C4G57 C4G69
DCDC/JACK C4F36 C4F49
10uF
0.1 0.1 0.1 0.1
LVDS1-D2N 1 8 LVDS_TX1_D2_N C4F33 C4F32 C4F44 C4F45 6.3V
560 560 25V/16V 25V/16V 25V/16V 25V/16V
C4F28 C4F27 0.01 4700 C4F37 C4F41 C4F40 0.01 4700 C4F48
25V/50V 50V 50V 25V/50V 50V 50V
LVDS1-D2P 2 7 LVDS_TX1_D2_P 10uF 0.1 470 10uF 0.1 470
6.3V 25V/16V 50V 6.3V 25V/16V 50V
LVDS1-CLKN 3 6 LVDS_TX1_CLK_N
LVDS1-CLKP 4 5 LVDS_TX1_CLK_P
T4G06
DLP2ADN900HL4
C4F34 C4F35 C4F39 C4F38 C4F47 C4F46 C4F51 C4F50
LVDS1-D3P LVDS_TX1_D3_P 0.01 4700 560 470 0.01 4700 560 470
2 7 C4F30 C4F29 50V C4F43 C4F42 50V
10uF 0.1 25V/50V 50V 50V 10uF 0.1 25V/50V 50V 50V
LVDS1-D4N LVDS_TX1_D4_N 6.3V 25V/16V 6.3V 25V/16V
3 6
MAIN-07
ASIC
LVDS TO ASIC
MAIN-04
DMCORE
MAIN-01 3.3VS
DCDC/JACK
MAIN-04 PON-RSTN
DMCORE
IC4L03
NAND01GW3B2CN6E-P
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
1
NC NC
2
NC NC
3
NC NC
4
NC NC
NAND_DATA[7]
5
R4L26 NC I/O7
10K
1/16W NAND_DATA[6]
6
NC I/O6
NAND_RBN NAND_DATA[5]
7
R/B I/O5
NAND_REN NAND_DATA[4]
8
R I/O4
NAND_CS0N
9
E NC
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
R4L27 NC NC
10K
1/16W
NC NC
C4L22 R4L33
C4L15 C4L19 R4L31
VDD VDD 12 0 1M
0.1 0.1 50V 1/16W 1/16W
25V/16V 25V/16V
VSS VSS
NC NC
IC4L05
X4L02 PL671-33-120SC-R
24.576Mhz
NC NC
NAND_CLE 1 XIN XOUT 8
CL NC
C4L23
10 L4L04
NAND_ALE NAND_DATA[3] 50V MMZ1608S601A
AL I/O3 2 VCC NC 7
NAND_WEN NAND_DATA[2]
W I/O2 C4L24
0.1
3 GND CLK1 6
R4L21
NAND_DATA[1] 25V/16V
WP I/O1
100 4 CLK0 NC 5
1/16W NAND_DATA[0]
NC I/O0
C4L14
0.1 NC NC
25V/16V
NC NC
NC NC R4L28 R4L44
L4L03 33 33 L4L05
N-600 ohm 1/16W 1/16W N-600 ohm
NC NC
CLK-FI MAIN-07
ASIC
EBI_ADDR[3]
EBI_CS0N
NAND_DATA[7]
NAND_DATA[6]
NAND_DATA[5]
NAND_DATA[4]
NAND_DATA[3]
NAND_DATA[2]
NAND_DATA[1]
NAND_DATA[0]
EBI_ADDR[0]
EBI_ADDR[1]
EBI_ADDR[2]
NAND_REN
C4L10 TV-RST
MAIN-10
0.1
L4L02 25V/16V MICRO
N-600 ohm
R4L13 10K
R4L15 10K
R4L17 10K
1/16W
1/16W
1/16W
C4L07
C4L03 0.1
0.1 C4L09 C4L11 DM-TVRST
L4L01 25V/16V
25V/16V 47 1000 MAIN-04
MPZ2012S221A 6.3V 50V
DMCORE
C4L01 C4L02 C4L04
47 47 1000
6.3V 6.3V 50V
C4L25
48 47 46 45 44 43 42 41 40 39 38 37 0.1
25V/16V
D0/GOE1
CLK0/I
CLK3/I
A0/GOE0
A4
A2
A1
D2
D4
D6
1 36
48 47 46 45 44 43 42 41 40 39 38 37 TDI VCC
MAIN-04
DSRA
CTSA
CDA
TXRDA
D2
VCC
RIA
GND
D4
D3
2 A8
NC
TDO 35
D1
D0
A6
R4L20
DM-RST DMCORE
3 A10 D8 34
100
1/16W
1 D5 active high RESET 36 4 A11 D10 33
WIRED-RMC MAIN-10
C4L08 MICRO
0.1 5 GND(0) D12 32
2 D6 N.C. DTRB 35 25V/16V IC4L02 R4L41 PON-RSTN
MAIN-04
6 VCCO(0) LC4064ZE-7TN48C D15 31 C4L26 0.1
100
C4L12
0.1
25V/16V
1/16W
DMCORE
R4L08
3 D7 N.C. DTRA 34 7 B15 VCCO(1) 30
25V/16V
10K 1/16W
8 B12 GND(1) 29 C4L28
4 RXB RTSA 33 0.1
9 B10 C11 28 25V/16V
5 RXA OP2A 32 10 B8 C10 27
B6 GND
C6
CLK1/I
CLK2/I
11 TCK C8 26
6 TXRDYB RXRDYA 31
IC4L01
B4
B2
B0
C0
C1
C2
C4
VCC TMS
12 25
SC16C652BIB48
7 TXA INTA 30 13 14 15 16 17 18 19 20 21 22 23 24
C4L13
0.1
25V/16V
8 TXB INTB 29
R4L45
3.3K A0 28
1.8VS MAIN-01
9 OP2B
1/16W
DCDC/JACK
10 CSA A1 27
11 CSB A2 26
R4L46
3.3K
1/16W 12 NC NC 25
RXRDYB
XTAL1
XTAL2
DSRB
RTSB
CTSB
CDB
IOR
RIB
IOW
GND
NC
13 14 15 16 17 18 19 20 21 22 23 24
R4L12 10K
R4L14 10K
R4L16 10K
R4L18 10K
1/16W
1/16W
1/16W
1/16W
R4L11
0
1/16W
X4L01
SMD-49 7.3728MHz
C4L05 C4L06
22 22
50V 50V
R4L04 0
R4L05 0
R4L06 0
R4L07 0
RST-UART
MAIN-04
DMCORE
WIRED-RMC-CARRIER
R4L22
4.7K
1/16W
R4L23
2.2K
1/16W
R4L24
4.7K
MAIN-10
1/16W
MICRO
RXDF
CTSF
RTSF
TXDF
UART-INTA
TV-TXD
TV-RTS
TV-CTS
TV-RXD
VCC(3.3V)
GND
TCK
TMS
TDI
TDO
IPC
MAIN-04 MAIN-10 6 5 4 3 2 1
DMCORE MICRO
8 JT 7
Factory Use Only

IC5A02
MM1701AHBE
8 7 6 5
C5A40
1U
10V/16V
9 C5A05 C5A06 C5A07 C5A08 C5A09
0.1 0.1 0.1 0.1 0.1
25V/16V 25V/16V 25V/16V 25V/16V 25V/16V
TO MAIN 01 1.8VS 1 2 3 4
(DCDC/JACK) Asic_1.0V
C5A41 C5A42 C5A01 C5A02 C5A03 C5A04

C5A10 0.01 1U 0.1 0.1 0.1 0.1
10uF 25V/50V 10V/16V 25V/16V 25V/16V 25V/16V 25V/16V R5A30 22 HSZ_OUT
HSZ_O
6.3V
R5A31 22 VSZ_OUT
VSZ_O
R5A32 22 DE_OUT
DE_O
R5A33 22 CLK_OUT
CLK_O
OUTRB[0-9]
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26
TO MAIN 08 (TMDS)
IC5A03 RB9 OUTRB[9] OUTBB[0-9]
4
MM1701AHBE B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26
8 7 6 5 B1 B2 B3 B4 B5 RB8 OUTRB[8]
3
C5A43
1U
10V/16V RB7 OUTRB[7]
2
9 BB0 OUTBB[0]
1
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24 C25 C26
22 R5A26 OUTGB[0-9]
1 2 3 4
L5A01
N-220 ohm
ASIC_AVDD_V RX_AVDD
D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 OUTBB[1]
D1 D2 D3 D4 D5
BB1
4
C5A44 C5A45 C5A48 C5A49
0.1 RB9 RB6 OUTRB[6]
3
0.01 2.2U 10uF
25V/50V 6.3V 6.3V 25V/16V RB8
L5A02
RB7 RB5 OUTRB[5]
2
N-220 ohm
RX_AGND
E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21 E22 E23 E24 E25 E26
RB4 OUTRB[4]
1
BB1
RB6
BB0 22 R5A25
RB3
F16 F17 F18
TO MAIN 05 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F19 F20 F21 F22 F23 F24 F25 F26
RB5
(DMMEM) RB4
RB2
GB9 RB3 OUTRB[3]
4
G1 G2 G3 G4 G5 G6 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G18 G19 G20 G21 G22 G23 G24 G25 G26
RB2 OUTRB[2]
3
LVDS_TX0_D0_N GB8
GB7 GB9 OUTGB[9]
2
R5A01
100 GB3
1/16W
LVDS_TX0_D0_P GB2 GB8 OUTGB[8]
1
H1 H2 H3 H4 H5 H6 H7 H20 H21 H22 H23 H24 H25 H26
LVDS_TX0_D1_N GB6 22 R5A24

R5A02 GB5
100 BB9
1/16W
LVDS_TX0_D1_P GB7 OUTGB[7]
IC5A01
4
J1 J2 J3 J4 J5 J6 J7 J20 J21 J22 J23 J24 J25 J26
UPD808526F1-S11-MNJ-SES-A GB6 OUTGB[6]
3
LVDS_TX0_D2_N
BB8
BB7 GB5 OUTGB[5]
2
R5A03
100
1/16W GB4
LVDS_TX0_D2_P GB4 OUTGB[4]
1
K1 K2 K3 K4 K5 K6 K7 K10 K11 K12 K13 K14 K15 K16 K17 K20 K21 K22 K23 K24 K25 K26
LVDS_TX0_CLK_N BB2 22 R5A23

R5A04 BB3
100 BB5 OUTGB[3]
1/16W
LVDS_TX0_CLK_P BB6 GB3
4
L1 L2 L3 L4 L5 L6 L7 L10 L11 L12 L13 L14 L15 L16 L17 L20 L21 L22 L23 L24 L25 L26 OUTGB[2]
GB2
3
LVDS_TX0_D3_N GB1
GB0 BB9 OUTBB[9]
2
R5A05
100 RB0
1/16W
LVDS_TX0_D3_P BB4 BB8 OUTBB[8]
1
M1 M2 M3 M4 M5 M6 M7 M10 M11 M12 M13 M14 M15 M16 M17 M20 M21 M22 M23 M24 M25 M26
LVDS_TX0_D4_N VSZ_O 22 R5A22

R5A06 HSZ_O
100 RA9
1/16W
LVDS_TX0_D4_P RB1
N10 N11 N12 BB7 OUTBB[7]
4
N1 N2 N3 N4 N5 N6 N7 N13 N14 N15 N16 N17 N20 N21 N22 N23 N24 N25 N26
DE_O BB6 OUTBB[6]
3
CLK_O
RA3 BB5 OUTBB[5]
2
RA8
P10 P11 P12 BB4 OUTBB[4]
1
P1 P2 P3 P4 P5 P6 P7 P13 P14 P15 P16 P17 P20 P21 P22 P23 P24 P25 P26
LVDS_TX1_D0_N RA6
R5A07 RA7 22 R5A21
100 GA9
1/16W
LVDS_TX1_D0_P RA2
R10 R11 R12 BB3 OUTBB[3]
4
R1 R2 R3 R4 R5 R6 R7 R13 R14 R15 R16 R17 R20 R21 R22 R23 R24 R25 R26
LVDS_TX1_D1_N RA4 BB2 OUTBB[2]
3
R5A08 RA5
100 GA5 GB0 OUTGB[0]
2
1/16W
LVDS_TX1_D1_P GA8
T10 T11 T12 GB1 OUTGB[1]
1
T1 T2 T3 T4 T5 T6 T7 T13 T14 T15 T16 T17 T20 T21 T22 T23 T24 T25 T26
LVDS_TX1_D2_N BA1
R5A09 BA0 22 R5A20
100 GA3
1/16W OUTRA[0-9]
LVDS_TX1_D2_P
RB0 OUTRB[0]
4
U1 U2 U3 U4 U5 U6 U7 U10 U11 U12 U13 U14 U15 U16 U17 U20 U21 U22 U23 U24 U25 U26
RB1 OUTRB[1]
3
LVDS_TX1_CLK_N GA4
R5A10
GA6
RA9 OUTRA[9] OUTGA[0-9]
TO MAIN 08 (TMDS)
2
100 GA7
1/16W
LVDS_TX1_CLK_P
RA8 OUTRA[8]
1
V1 V2 V3 V4 V5 V6 V7 V20 V21 V22 V23 V24 V25 V26
LVDS_TX1_D3_N BA3
GA2
22 R5A19 OUTBA[0-9]
R5A11
100 BA8
1/16W
LVDS_TX1_D3_P BA9 RA7 OUTRA[7]
4
W1 W2 W3 W4 W5 W6 W7 W20 W21 W22 W23 W24 W25 W26
RA6 OUTRA[6]
3
LVDS_TX1_D4_N BA2
BA4 RA5 OUTRA[5]
2
R5A12
100 BA6
1/16W
LVDS_TX1_D4_P BA7 RA4 OUTRA[4]
1
Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23 Y24 Y25 Y26
L5F07
RA0 22 R5A29
N-600 ohm GA0
ASIC_VDDQ_V
BA5 RA3 OUTRA[3]
4
RA1
C5A20 C5A21 C5A22 C5A23 C5A24 C5A25 C5A26 C5A27 RA2 OUTRA[2]
AA11
3
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 AA1 AA2 AA3 AA4 AA5 AA6 AA7 AA8 AA9 AA10 AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AA24 AA25 AA26
25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V
GA9 OUTGA[9]
2
GA1
GA8 OUTGA[8]
1
AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 AB24 AB25 AB26
22 R5A18
ASIC-MTOD
ASIC-MTOD OUTBA[0]
BA0
4
OUTBA[1]
BA1
3
AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 AC14 AC15 AC16 AC17 AC18 AC19 AC20 AC21 AC22 AC23 AC24 AC25 AC26
GA7 OUTGA[7]
2
ASIC-DTOM
ASIC-DTOM
GA6 OUTGA[6]
1
AD1 AD2 AD3 AD4 AD5 AD6 AD7 AD8 AD9 AD10 AD11 AD12 AD13 AD14 AD15 AD16 AD17 AD18 AD19 AD20 AD21 AD22 AD23 AD24 AD25 AD26
ASIC-CLK
22 R5A17
ASIC-CLK
GA5 OUTGA[5]
4
TO MAIN 04 GA4 OUTGA[4]
3
ASIC-CS AE1 AE2 AE3 AE4 AE5 AE6 AE7 AE8 AE9 AE10 AE11 AE12 AE13 AE14 AE15 AE16 AE17 AE18 AE19 AE20 AE21 AE22 AE23 AE24 AE25 AE26
(DMCORE) ASIC-CS GA3 OUTGA[3]
2
GA2 OUTGA[2]
1
AF1 AF2 AF3 AF4 AF5 AF6 AF7 AF8 AF9 AF10 AF11 AF12 AF13 AF14 AF15 AF16 AF17 AF18 AF19 AF20 AF21 AF22 AF23 AF24 AF25 AF26 22 R5A16
ASIC-RSTN
ASIC-RSTN R5A35
0 BA9 OUTBA[9]
4
CLK-FI 1/16W
BA8 OUTBA[8]
3
TO MAIN 06 C5A95 BA7 OUTBA[7]
2
0.01
CLK-FI 25V/50V
(ROM/EBI) BA6 OUTBA[6]
1
22 R5A15
TO MAIN 01 L5F06
N-600 ohm BA5 OUTBA[5]
4
3.3VS ASIC-3.3V
(DCDC/JACK) BA4 OUTBA[4]
3
C5A50 C5A51 C5A52 C5A53 C5A54 C5A55 C5A56 C5A57 C5A58 C5A76 C5A77 C5A78 C5A79
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V BA3 OUTBA[3]
2
BA2 OUTBA[2]
1
22 R5A14 OUTGA[0]
GA0
4
C5A59 C5A60 C5A61 C5A62 C5A63 C5A64 C5A65 C5A66 C5A67
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 OUTGA[1]
GA1
C5A12 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V
3
10uF
6.3V RA0
OUTRA[0]
2
RA1 OUTRA[1]
1
C5A68 C5A69 C5A70 C5A71 C5A72 C5A73 C5A74 C5A75
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 22 R5A13
25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V 25V/16V
(G)
OUTGB[1]
OUTGB[0]
OUTGB[2]
OUTGB[3]
OUTGB[4]
OUTGB[5]
OUTGB[6]
OUTGB[7]
OUTGB[8]
OUTGB[9]
(B)
OUTBB[2]
OUTBB[3]
OUTBB[4]
OUTBB[5]
OUTBB[6]
OUTBB[7]
OUTBB[8]
OUTBB[9]
OUTBB[1]
OUTBB[0]
(R)
OUTRB[1]
OUTRB[0]
OUTRB[2]
OUTRB[3]
OUTRB[4]
OUTRB[5]
OUTRB[6]
C6C88
0.1
25V/16V C6C77
0.1
25V/16V
C6C78
C6C87 100
100 50V
50V
101
100
102
81
91
99
98
97
96
95
94
93
92
90
89
88
87
86
85
84
83
82
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
RO6
RO5
GND
R04
G07
G06
B08
B09
GND
VCC
G08
G09
GND
VCC
R08
R09
G05
G04
B07
GND
B06
B05
B04
B010
B011
B012
B013
B014
B015
G010
G011
G012
G013
G014
G015
R010
R011
R012
R07
103
R013
64
OUTRB[7]
HSYNC
104
R014
63
OUTRB[8]
VSYNC
105
R015
62
OUTRB[9]
TMDS3.3VS
31
DE
106
R6C60
300 C6C59
AGND
61
1/16W 0.1 DLP2ADN900HL4 1 9
16V
T6C01
GND 17
107
C6C30
1U 2 10
TX2+
60
10V/16V TX2+A 1 8 TX2+
18
C6C01 3 11
IDCK
108
0.1 TX2-A 2 7 TX2-
TX2- 19
59
8 7 6 5 25V/16V C6C00
100 4 12
C6C58 C6C61 TX1+A 3 6 TX1+
50V 100
VCC 20
109
0.1
5 13
J6C00
50V R6C57
IC6C02 AVCC 25V/16V
58
300 C6C56 TX1-A 4 5 TX1-
MM1663DHBE 9 1/16W 0.1 21
CTL3 16V
6 14
TO ENGINE
110
TX1+ 22
57
7 15
DGND
SS_CLK_OUT 23
111
1 2 3 4 8 16
TX1-
56
24
SS_CLK_IN
IC6C00
112
C6C33
R6C54 C6C53
AGND C1 C3
55
470
C6C32 50V 300 0.1 DLP2ADN900HL4
C6C31 L6C05 1/16W
.33M 22 16V
T6C02
PVCC2 C5 C5
113
16V 6.3V
TX0+
54
C6C03 TX0+A 1 TX0+
0.1 C6C02 8
C2 C4
C6C95 25V/16V 100
PGND2 SiI7170CMHU C6C52 C6C55
114
C6CA2 50V 100 0.1 TX0-A 2 7 TX0-
0.1 25V/16V
TX0- 32
53
0.1 25V/16V 50V
L6C00
L6C01
L6C06
L6C94
25V/16V
TXC+A 3 TXC+
L6C02
L6C03
L6C04
L6C08
6
RST/ISEL
115
AVCC TXC-A
52
4 5 TXC-
VCC
116
51
C6C07 C6C06
0.1 100 RSVD
25V/16V 50V
GND
117
DGND
R6C49
AVCC
50
300
C6C48
C6C50 1/16W
100 C6C49 0.1
OUTRA[9] RE15
118
50V 0.1 16V
49
25V/16V
TXC+
OUTRA[8] RE14
119
48
TXC-
RE13
120
OUTRA[7]
AGND
47
R6C46
RE12
121
OUTRA[6] 470 L6C46
1/16W
EXT_SWING
46
ATMDS3.3VS
C6C44
100
OUTRA[5] RE11
122
50V C6CA3
GND
45
0.1
25V/16V
C6C45
RE10
123
OUTRA[4] 0.1
25V/16V
VCC
44
RE9
124
OUTRA[3]
CTL1
43
OUTRA[2] RE8
125
CTL2
42
C6C29
0.1
25V/16V R6C38
VCC
126
C6C28 10K
100 1/16W
41
50V SS_EN#
GE15
127
OUTGA[9]
PD
40
GE14
128
OUTGA[8]
PVCC1
PGND1
39
RE7
GE11
GE10
BE15
BE14
BE11
BE10
GE13
GE12
BE13
BE12
MSEN
DEPO
EDGE
PIXS
DEP1
BE4
BE5
BE6
BE7
GE4
GE5
GE9
BE9
BE8
SCL
GE8
GND
VCC
VCC
SDA
GE6
GE7
RE4
GND
RE5
RE6
TMDS3.3VS
20
21
23
25
26
27
28
29
30
31
33
34
35
36
37
38
10
11
12
13
14
15
16
17
18
19
22
24
32
2
9
1
C6C26
C6C13 100
100 50V
50V
C6C25
C6C14 C6C22 0.1 C6C23
0.1 100 25V/16V 0.1
25V/16V 50V 25V/16V
DGND
L6C14
OUTGA[0]
OUTGA[1]
L6C24
OUTGA[7]
OUTGA[6]
OUTGA[5]
OUTGA[4]
OUTGA[3]
OUTGA[2]
OUTBA[0]
OUTBA[1]
OUTBA[9]
OUTBA[8]
OUTBA[7]
OUTBA[6]
OUTBA[5]
OUTBA[4]
OUTBA[3]
OUTBA[2]
ENGINE-ID
LAMPLIT-DVI
LAMPEN
C6CA0
0.1
25V/16V
DLP-ASIC-READY TO MAIN 10 (MICRO)
DLP-RST
C6CA1
0.1 3.3V-ENG-SDA
25V/16V
3.3V-ENG-SCL
TMDS-PDOWN
3.3VS
OUTRA[0]
OUTRA[1]
5VS
TO MAIN 01 (DCDC/JACK)
STEREO-SYNC
OUTGB[0-9]
OUTBB[0-9]
OUTRB[0-9]
OUTGA[0-9]
OUTBA[0-9]
OUTRA[0-9]
CLK_OUT
HSZ_OUT
VSZ_OUT
DE_OUT
TO MAIN 07 (ASIC)
5VS
3.3VS
MAIN 01
R3A37
1.8VS [DCDC/JACK]
2.2 1/16W
R3A44
R3A45 47 R3A38
47 1/16W R3A43 2.2
1/16W 47 1/16W
1/16W
C3A42 C3A38
0.1 C3A39 K-1M
0.1 25V
25V/16V
25V/16V
R3A47
47
1/16W
C3A40
0.1
16V
BOSS
C3A48
DGND 0.1 48 47 46 45 44 43 42 41 40 39 38 37
25V/16V SPL+
SPEAKERS
1
1
36 C3A37 L3A36
50V
2 0.1
35 SPL-
22uH, 3A
2
C3A35 C3A50 C3A36
DGND 3 IC3A00 34 0.1 0.1 0.1
ES
YDA156-VZ-E2 50V 50V 50V
4
3
33 L3A33
C3A06
0.1
25V/16V
5 32 22uH, 3A C3A33
SPR-
4
0.1
6 50V
31 C3A31
49 50V
0.1 SPR+
7
5
30 C3A30
AGND L3A28
50V
C3C01 C3C16 0.1
1U
8 29
1U 22uH, 3A C3A28
10V/6.3V 10V/6.3V C3A26
R3A10 C3A51 0.1
1 CN VEE 16 9 28 0.1 0.1
1K 50V 50V
50V
1/16W
CP VSS2 15 10 27
R3C06 2 L3A25
100 R3C14
10
1/16W 11 26
1/16W L3A11 22uH, 3A C3A25
3 SMUTE CVDD 14 MMZ1608S601A 0.1
C3C14 12 25 50V
C3C15 C3A12
Mast_CLK 0.1 22 C3A11 C3A22
4 MCLK DZF 13 25V/16V 6.3V 22 0.1 13 14 15 16 17 18 19 20 21 22 23 24 0.1
6.3V 25V/16V 50V
CLK VSS1 12 C3C12 C3C13
5 BICK 0.1 22
25V/16V 6.3V L3C12
C3A17
25V/16V
0.1
DATA VDD
6 SDTI 11 R3A16 R3A23 C3A23
MMZ1608S601A 1M 1K 470U
C3A13 1/16W 35V
L/R_CLK C3A14 1/16W DGND
R3A15
1/16W
AOUTL 10
R3A21
1/16W
7 LRCK 22
470
0.1
6.3V
100
DGND
25V/16V AGND
X3A01
8 DIF AOUTR 9
R3A22 C3A24
R3C12 24.576MHz 100 470U
R3C09 470 L3A13 1/16W 35V
470 1/16W
MMZ1608S601A
C3A15
15
C3A16
12
MAIN 01
DAC 1/16W
50V 50V AGND 18VS
IC3C00
AK4420ETP
C3C09 DGND DGND
[DCDC/JACK]
C3C11 AVR-L
2200 2200
50V 50V AVR-R
DGND
DGND DGND
BSC-M1-SCL
BSC-M1-SDA
MAIN 04
I2S-OUT-LR
I2S-OUT-CLK
[DMCORE]
I2S-OUT-DATA
AUDIO-DSP-RST
Low=MUTEON MUTE-SPKR1 MAIN 10

AVR-MUTE
[MICRO]
C3A52
3300
50V
C3A53
3300
50V
C3A54
3300
50V
C3A55
3300
50V
C3A56
3300
50V
C3A57
3300
50V
DGND
AGND
3.3VSL
R7AC2
4.7K
LAMP-R 1/16W
Q7A67
R7A67
LAMP-G 330 RT1P241C-T112-1 LAMPLITZ
TO MAIN 01 1/16W TO MAIN 01
[DCDC/JACK] KSC0 COVER-DET [DCDC/JACK]
KSC1
5VS
Q7A68
R7A68
330 RT1P241C-T112-1 DIM
1/16W
R7AC8
R7AC5 R7AC7 180
10K 10K 1/16W LAMPEN-BALLAST
1/16W 1/16W
Q7A05
R7AB3 2SC3052-T112-1E,F
R7A83 22K
2.2K R7A85
R7A84 10K 1/16W
2.2K 1/16W
1/16W
1/16W R7AC6 Q7A03
R7AB1 10K
33K 1/16W 2SC3052-T112-1E,F
1/16W
HDMISW-SCL
HDMISW-SDA
CEC
TO MAIN 03
HDMI-INT LAMPEN
[HDMI] R7A87
22K Q7A04
HDMI-DET[0] 1/16W
R7A88 RT1N436C-T112-1
22K
HDMI-DET[1] 1/16W
R7A89
22K
HDMI-DET[2] TO MAIN 08
1/16W
HDMI-DET[3] [TMDS]
Q7A06
R7A90
R7B87 R7B88 R7B89 22K RT1N436C-T112-1
33K 33K 33K 1/16W
1/16W 1/16W 1/16W
LAMPLIT-DVI
R7B90
33K
1/16W DLP-RST
R7A92
100
1/16W
R7AA2 R7AA3 R7A91
10K 10K 10K
1/16W 1/16W 1/16W
C7AA2
0.01 C7A91 MUTE-SPKR1 TO MAIN 01/09
C7AA3
25V/50V 0.1
0.01
25V/50V 25V/16V AVR-MUTE [DCDC/JACK]
[AUDIO]
R7A72
2.2K
R7B73 1/16W
10K
1/16W
KSC1
R7B20
100
1/16W
R7A20 R7A95
5.6K 100
1/16W 1/16W
C7A97
0.1 C7B97 R7AC3
25V/16V 47 100
6.3V 1/16W
R7AF4
10K
KSC1 102
GND 101
AVREF0 100
71
70
69
68
67
DM-CTS 66
FAN-CTL1 65
R7A64
NC 99
NC 98
AVREF1 97
96
(INTERNAL PULL-UP) BUS-REQ 95
94
93
92
COVER_DET 91
HDMI-DET3 90
HDMI-DET2 89
HDMI-DET1 88
HDMI-DET0 87
HDMI-F-INT 86
CEC 85
HDMI-SDA 84
HDMI-SCL 83
NC 82
PC_RXD 81
PC-TXD 80
DM_TXD 79
DM_RXD 78
DM-RTS 77
SYST5-CAPTURE2 76
SYST5-CARMASK1 75
ENG_PWR 74
MUTE_SPKR1 73
AVRMUTE 72
1/16W
100
TO MAIN 08 DLP-RST 1/16W
128 127 126 125 124 123 122 121120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103
KSC0
61 62 63 64
NC
NC
NC
NC
NC
ENGINE-ID
LED_G
LED_R
NC
[TMDS] R7AC4
100 LAMPLIT R7A63
100
1/16W
1/16W
ID3
ANI12
ANI11 LAMPLIT_OUT
SPDIF-DET
39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ANI10 SPDIF_DET
R7AC1 MAIN 01/09
100 ANI9 NC
1/16W [DCDC/JACK]
STBY-ON
IR-IN
ENG_ID STBY [AUDIO]
CHASSIS-TEMP EVDD1 MAIN-RELAY
PON-SHORT
C7A04
PON-SHORT EVSS1
0.01
TO MAIN 01 AVR-DET
25V/50V BACKLIGHT-IN NC
C7B57
0.1
[DCDC/JACK] RMC
NC CABLEDET0
25V/16V
12VS-OFF
NC NC
5VSL-OFF
NC IC7A01 NC
UPD78F1178GF(S)-GAT-AX
SYST5_CTRL2 Q7A46
TO MAIN 06
NC
2SC3052-T112-1E,F
TO MAIN 08
WIRED-RMC DLP-ASIC-READY
[ROM/EBI] AVR-DET DLP-ASIC-RDY R7A50 [TMDS]

R7AA6 100
100 R7B50
R7AA8 NC 1/16W
10K 1/16W NC 10K
TMDS-PDOWN 1/16W
1/16W
TO MAIN 08 3.3V-ENG-SCL
R7AF5 WIRED-RMC PON-RSTN
10K
[TMDS] 3.3V-ENG-SDA
1/16W
R7A46
NC NC 100 C7A46
1/16W 0.1
R7AF6 WIRED-RMC-DET RELAY 25V/16V R7B46
10K 390
6
1/16W R7A44 1/16W

ENG-EMR-OFF CABLEDET1 100
1/16W
TO MAIN 09
BUS-REQUEST AUDIO-DSP-RST
4
EMR-OFF AUDIODSP-RST [AUDIO]
20 SYST5-CARMASK2
SYST5-CAROUT NC
3
ENG
R7B03 SYST5-CAPTURE POWER_GOOD

TO ENGINE
16 SYST5-RMOUT2
GPIO-TEST2
14 GPIO-TEST1
24 TMDS-PDOWN
1K
INV-SHORT
3.3V-ENG-SDA 1/16W
2
RMC
ENG-SDA
ENG-SCL
SYST5-RMOU1
BLUELED
19 INV-PWR
REG CAP
LAMPEN
C7A03
1000
21 TOOL1
22 TOOL0
26 RESET
29 FLMD0
EVSS0
EVDD0
3.3V-ENG-SCL 50V LAMPDIM-TX
27 XT2
28 XT1
VSS
VDD
1
NC
NC
NC
15 NC
17 NC
18 NC
23 NC
25 NC
30 X2
X1
NC
NC
NC
LAMPLIT-RX
5
10
11
12
13
31 32 33 34 35 36 37 38
9
NC C7A05 C7A32
0.01 1U
12VS-OFF 25V/50V 10V/16V
5VSL-OFF
SYSTEM-5 V41+ Only C7A36
0.1
25V/16V
3.3VS R7A03
4.7K
R7A08
1/16W 47
R7B30
5VS *IC7E01 1/16W
1M
74HC132DB 1/16W
*C7E00 X7A02
RMOUT1 R7A02 C7A02 R7A09 20.000MHz
0.1 VCC 1A
*C7E01 14 1 10K 0.01 47
25V/16V 25V/50V 1/16W
6 100 *R7E16 1/16W
16V 0 C7A30 C7A31
1/16W *C7E03 RMOUT2 10 10
1 *R7E02 4B 1B
13 2 50V 50V
2.7K 0.1
1/16W 25V/16V
4A 1Y SYST5-CAPTURE2
12 3
4 *R7E03
330
1/16W
*Q7E01 4Y 2A
5 2SB1424T100R 11 4
*Q7E00
*R7E05 RT1N436C-T112-1
22 3B 2B
10 5
*P7E01 1/10W
YKB21-5263B
TV-TXD
3A 2Y
*R7E07 9 6
TO MAIN 06 10K *R7E06
WIRED-RMC-CARRIER 1/16W 22
1/10W
TV-RXD TO MAIN 06
VSS
[ROM/EBI] 8
3Y
7 TV-RTS [ROM/EBI]
1 2 R7A27
0 TV-CTS
DBU3.3V
ABU3.3V
1/16W
X7A01
DMX-26S 32.768KHZ
R7AB7
33K D7A03
R7AA7 1/16W 3
MC2850-T111-1
R7E01
R7E08
10K
2.2K
1/16W
1 4
DMPWRGDN MAIN 04/06
2.7K 1/16W
1/16W [DMCORE]
PON-RSTN
2 3 [ROM/EBI]
C7A28
C7A27 5
L7A01 5
L7A02 50V
N-600 ohm 50V
N-600 ohm
TV-RST MAIN 04
IC7A03 R7A22 [DMCORE]
10K
MM3376A33NRE 1/16W
TO MAIN 01 5VSL
R7A21
10K
1 VDD VOUT 5 1/16W
[DCDC/JACK]
C7AA7 R7AB2 C7AA8
0.1 2.2K 2 GND 0.1 C7AA9
25V/16V 1/16W 25V/16V
EECS0HD224V
3 CE NC 4
R7A23
10K
1/16W
D7A04
MC2836-T112-1
5 *LE5 4
C7B26
0.01
3 2 1 25V/50V
RNT
5VSL
R7A81 R7A80
*L7C03
*L7C02
SBL 10K
1/16W
10K
1/16W
N-600 ohm
N-600 ohm
TO MAIN 01 3.3VSL
V41+ Only
[DCDC/JACK] *R7C07 *R7C03
3.3
22K *Q7C02
1/16W 1/10W
ISA1235AC1-T112A-1E,1F
*R7C05
470
1/16W
*R7C06
3.3K
1/16W
*Q7C01
*R7C04
2SC3052-T112-1E,F
22K
1/16W
PC-TXD
PC-RXD
BLUE-LED
MAIN 01
[DCDC/JACK]
TO PWB-MAIN
TO PWB-MAIN
LE2
V41+ Only R8313
270
LE3 1/16W
6 5 4 3 2 1 4 3 2 1
BOSS C8307
R8305
PWB-CONT 1U
KSC1
1.2K
KSCO
GND
N/C
LED-R
LED-G
LED-R
LED-G
10V/6.3V 1/16W
KSCO
GND
PWB-LED D8301 C8305
R8310 220
SFH235FA 120K 50V R8306
1/16W
10K
1/16W
IC8300
MAX4489ASA+T
C8306 R8304 R8303
0.01 220K 10K
25V/50V OUTA 1/16W 1/16W
ENTER/ 1 V+ 8
R8302
2.7K
ACTIVITY KSHS611BT -INA OUTB 1/16W IR-IN
D8000 S8002 2 7
R8308
SML1216W-C,D 220K
1/16W -INB
+INA
(R) 1 (G) 3 6
3 D8200
S8200 SML1216W-C,D
2 R8000 KSHS611BT D8300
TO PWB-MAIN LE
3.3K
1/16W MC2838-T112-1 4 V- 5
(R) 1 3 (G) +INB 5VS
5
R8309 R8307
R8311 150
2 47K 120K
POWER 1/16W 1/16W 1/16W
C8301
D8000 for C8304 C8302 1U
4
K-4.7M 1U 10V/6.3V
B6.3V 10V/6.3V
V41+ Only R8312
LE1
12K C8303 3.3VSL
3
1/16W 0.1
16V
RMC
2
R8001 R8002 R8003 R8004
3.3K 3.3K 3.3K 3.3K
1/16W 1/16W 1/16W 1/16W
V41, V41C Only GND
1
BOSS
KSHS611BT KSHS611BT KSHS611BT KSHS611BT KSHS611BT
S8000 S8003 S8004 S8005 S8006
POWER CH-DOWN/
CH-UP/ VOL-DOWN/ VOL-UP/
ADJ-LEFT ADJ-RIGHT ADJ-DOWN ADJ-UP
Z8300
ROM-V3132SY
REMOCON
S8000 for PRE-AMP
Vout Vcc GND
V41+ Only
1 2 3
R8301
1K
1/16W
R8300
3.3K
1/16W L8300
N-220 ohm
3.3VSL
C8300
1U
10V/6.3V
PWB-PREAMP
V41+ Only
PWB-SBL
V41+ Only
PWB-RS232 5
3
LE5
2 1
5VSL 4
LRTN
PWB-SW-LAMP
S8100 R8701 R8702 R8703 R8704 R8705 R8706 R8707
SSCF210100 R8708
220 220 220 220 220 220 220
1
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 220

1/10W
11
10
A A A A A A A A A A A A A A A A A A A A A A A A
6
5 4 3 2 1
PJ8232 D8701 D8703 D8705 D8707

1221-XXH-09P-FXX
C LB E6SG-S2U1-35-1 C C LB E6SG-S2U1-35-1 C C LB E6SG-S2U1-35-1 C C LB E6SG-S2U1-35-1 C
D8702 D8704 D8706 D8708

LB E6SG-S2U1-35-1 LB E6SG-S2U1-35-1 LB E6SG-S2U1-35-1 LB E6SG-S2U1-35-1
GND
RXD
TXD
BOSS
BOSS
4 3 2 1
1 2 3
CD
PG2
TO PWB-MAIN

WD73C9

Uploaded by

Copyright:

Available Formats

WD73C9

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

WD73C9

Uploaded by

Copyright:

Available Formats

Ser vice

Version 9.0 01/28/2011 2009

V41C Chassis V41 Chassis

• Weight : See table on page 5

• Design specifications are subject to change without notice.

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

PRODUCT SAFETY NOTICE ............................................................................................................. 5

SAFETY PRECAUTIONS ................................................................................................................... 6

SCREEN REPLACEMENT ................................................................................................................ 16

MIRROR REPLACEMENT ................................................................................................................ 22

SPEAKER & PWB-SBL Replacement ............................................................................................ 23

INITIALIZATION, INITIAL SETTINGS & TROUBLESHOOTING ....................................................... 22

SERVICE ADJUSTMENTS ............................................................................................................... 31

USING LEAD FREE SOLDER .......................................................................................................... 37

CHIP PARTS REPLACEMENT ......................................................................................................... 38

REPLACEMENT PARTS .................................................................................................................. 39

PARTS QUICK REFERENCE LIST ................................................................................................... 40

SERVICE PARTS LIST .................................................................................................................... 41

SCREEN ASSEMBLY PARTS LIST .................................................................................................. 47

MIRROR KITS AND PREPARATION ................................................................................................ 49

CIRCUITRY BLOCK DIAGRAMS ..................................................................................................... 51

This service manual includes:

The parts list section of this service manual includes:

PRODUCT SAFETY NOTICE

Leakage current check

GWG - Green Wire Ground

A A 73" & 82" Models

CHASSIS REMOVAL & DISASSEMBLY

CHASSIS REMOVAL & DISASSEMBLY (Continued)

CHASSIS REMOVAL & DISASSEMBLY (Continued)

Top Chassis Brackets Removal

OPTICAL ENGINE ASSEMBLY

OPTICAL DUCT CJ1

OPTICAL ENGINE REPLACEMENT

OPTICAL ENGINE ASSEMBLY REMOVAL

Figure 1: Duct Assembly (Rear View)

OPTICAL ENGINE REPLACEMENT (Continued)

Figure 2: Duct Assembly (Top View)

Figure 3: Lower Duct (Top View)

OPTICAL ENGINE REPLACEMENT (Continued)

Figure 4: Lower Duct Rear Mounting Screw

Figure 5: Lower Duct Front Mounting Screw

LOWER DUCT REMOVAL

ENGINE Replacement (Reverse the Removal Procedure)

COLOR WHEEL REPLACEMENT

COLOR WHEEL REPLACEMENT PROCEDURE

Figure 1: Color Wheel Cover and Connectors

6) Remove 3 screws (B) shown inFigure 2.

Figure 2: Color Wheel

PROJECTION LENS REPLACEMENT

PROJECTION LENS REPLACEMENT PROCEDURE

1) Remove Engine Assembly.

SCREEN REPLACEMENT 60”, 65” & 73” Models

Screen Removal From the Bezel-Front

SCREEN REPLACEMENT 60”, 65” & 73” Models (continued)

SCREEN REPLACEMENT 82” Models

Screen Assembly Removal

SCREEN REPLACEMENT 82” Models (continued)

Lenticular Screen and Fresnel Lens Removal

SCREEN REPLACEMENT 82” Models (continued)