Castrol EDGE 5W-40: Description

Product Data
Castrol EDGE 5W-40

Boosted with TITANIUM FST™ - Strength for Maximum Performance
Description
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under
higher pressures than ever before.
The only thing keeping metal engine components apart is the oil, so it needs to be strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength,
preventing oil film breakdown and reducing friction.
Castrol EDGE with TITANIUM FST™: helping your engine perform at its best
Application
Castrol EDGE 5W-40 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA C3, API SN or earlier specification.
Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers, please refer to the specifications
section and your owners handbook.
*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0715082
Advantages
Castrol EDGE 5W-40 gives you the confidence to demand maximum engine performance from today’s latest technology,
highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE 5W-40:
Maximises short and long term engine performance

Reduces engine deposits to help maximise engine response
Delivers unsurpassed levels of protection across a variety of driving conditions and temperature
Independently proven to Improve engine efficiency
Delivers and sustains maximum horsepower for longer, even when under pressure
Page: 1/2
Typical Characteristics
Name Method Units Castrol EDGE 5W-40
Density @ 15C, Relative ASTM D4052 g/ml 0.85
Viscosity, Kinematic 100C ASTM D445 mm²/s 13
Viscosity, CCS -30C (5W) ASTM D5293 mPa.s (cP) 5800
Viscosity, Kinematic 40C ASTM D445 mm²/s 75
Viscosity Index ASTM D2270 None 174
Pour Point ASTM D97 °C -42
Flash Point, PMCC ASTM D93 °C 202
Ash, Sulphated ASTM D874 % wt 0.8
Product Performance Claims

ACEA C3
API SN/CF
Meets Fiat 9.55535-S2
Meets Ford WSS-M2C917-A
* GMdexos2™
MB-Approval 226.5/ 229.31/ 229.51
Renault RN 0700 / RN 0710
VW 502 00/ 505 00/ 505 01
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed
to hot sun or freezing conditions.
Castrol EDGE 5W-40

24 Jul 2018
Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.
This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is
made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised
to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the
intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries
for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the
material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
require any further information.
Castrol (UK) Limited, PO BOX 354, Chertsey Road, Sunbury On Thames, Middlesex, TW16 9AW
Orders/Enquiries: 0345 6008125 Technical Enquiries: 0345 082 1719 BP (Ireland) Ireland Orders/Enquiries: 1850 930 3942 Ireland Technical Enquiries: 1800
509 353
www.castrol.com/uk
Page: 2/2

Castrol EDGE 5W-40: Description

Uploaded by

Copyright:

Available Formats

Castrol EDGE 5W-40: Description

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Castrol EDGE 5W-40: Description

Uploaded by

Copyright:

Available Formats

Product Data

Castrol EDGE 5W-40

*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0715082

Maximises short and long term engine performance

Density @ 15C, Relative ASTM D4052 g/ml 0.85

Viscosity, Kinematic 100C ASTM D445 mm²/s 13

Viscosity, CCS -30C (5W) ASTM D5293 mPa.s (cP) 5800

Viscosity, Kinematic 40C ASTM D445 mm²/s 75

Viscosity Index ASTM D2270 None 174

Pour Point ASTM D97 °C -42

Flash Point, PMCC ASTM D93 °C 202

Ash, Sulphated ASTM D874 % wt 0.8

Product Performance Claims

Castrol EDGE 5W-40

You might also like