Indoor WIFI Camera Manual
Indoor WIFI Camera Manual
Indoor WIFI Camera Manual
Built-in Speaker
Reset/WPS Button
Wall mounting plate x 1 Installation position map x 1 Solid green light Wifi connected
Red light and quick flash Device fail to boot up; SD card not working
Device
Step 1 Drill holes on the proper mounting surface according to the hole
sites of installation position map.
THE YALE BRAND, with its unparalleled global reach and
Step 2 Knock the expansion bolts into the holes
range of products, reassures more people in more countries Step 3 Use self tapping screws to install the quick installation board
than any other consumer locking solution.
and fix it well
THE ASSA ABLOY GROUP is the world’s leading Step 4 Connect the device to power
manufacturer and supplier of locking solutions, dedicated to
satisfying end-user needs for security, safety and convenience.
Step 5 Adjust the device monitoring angle and stick the device on the
quick installation board
Note:
If you want to add more than one camera, please repeat step 4 for each camera. If you want to change wifi settings, please reset the camera to factory setting and repeat step 4.