Az 850
Az 850
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Microminiature size: Height: .197 inches (5 mm);
Length: .551 inches (14 mm); Width: .354 inches (9 mm)
• High sensitivity, 79 mW pickup
• Monostable and bistable (latching) single coil and
two coil versions available
• Meets FCC Part 68.302 1500 V lightning surge
• DIP terminal layout, fits 10 pin IC socket
• Epoxy sealed
• UL, CUR file E43203
CONTACTS GENERAL DATA
Arrangement DPDT (2 Form C) Life Expectancy Minimum operations
Bifurcated crossbar contacts Mechanical 1 x 108
Electrical 2 x 105 at 1 A, 30 VDC, resistive
Ratings Resistive load: 1 x 105 at 0.5 A, 125VAC, resistive
Max. switched power: 30 W or 62.5 VA
Operate Time (typical) 2 ms at nominal coil voltage
Max. switched current: 1 A
Max. switched voltage: 220 VDC* or 250 VAC Release Time (typical) 1 ms at nominal coil voltage
Max. carry current: 2A (with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
Set Time 2 ms at nominal coil voltage (typical)
special precautions must be taken.
Please contact the factory.
(bistable versions) Recommended coil pulse: 20 ms
Shock 50 g
MECHANICAL DATA
.551 .354 PC BOARD L AYOUT
[14.0] [9.00]
.010
.197
[0.25]
[5.0]
.027 10 x ø .032
[0.69] [0.8]
4x.100 10x.138 10x.010
[2.54] 10x.020 [3.5] [0.25]
.300
[0.51] [7.63]
.300
[7.62]
WIRING DIAGRAMS
SINGLE SIDE STABLE BISTABLE (LATCHING) TWO COIL
1 2 3 4 5 1 2 3 4 5 Set Coil
(+)
.075
(+) (-) [1.90]
Diagrams show the "reset" 4 x .100
Stripe on top of relay
indicates the position position before energized [2.54]
of pins 1 & 10 with polarity as shown.
(+) (-)
(-)
10 9 8 7 6 10 9 8 7 6 Reset Coil
VIEWED TOWARDS TERMINALS
DEENERGIZED OR RESET CONDITION RESET CONDITION
Watch for polarity Watch for polarity