Alfa Laval Packinox: Combined Feed/effluent Heat Exchangers

Alfa Laval Packinox
Combined feed/effluent heat exchangers
Introduction
Alfa Laval Packinox combined feed/effluent heat exchangers
are ideal for demanding heat recovery duties in processes
with high temperatures and pressures.
Thanks to its unique design, a Packinox combines the

thermal and hydraulic efficiency of welded plate heat
exchangers with the high-temperature and high-pressure
resistance of shell-and-tube heat exchangers.
The result is a compact heat exchanger with high capacity,

high heat recovery efficiency and minimal pressure drop.
Applications
Alfa Laval Packinox heat exchangers are used as feed/
effluent heat exchangers in:
• Catalytic reforming
• Paraxylene production
• Hydrotreating/hydrodesulfurization
• Paraffin dehydrogenation for LAB Plants
There are currently more than 350 Packinox heat exchangers

in operation in refineries and petrochemical plants around the
world.
Benefits
An Alfa Laval Packinox offers many benefits over a shell-and- The plate bundle resides inside a pressure vessel filled with
tube solution: the cold-stream gas under high pressure. This means the
• High degree of heat recovery – HAT (hot approach plate bundle is only exposed to the differential pressure
temperature) as low as 20°C between the hot and cold streams, thereby minimizing the
• Compact size compared to a comparable shell-and-tube mechanical stress on the plate welds.
solution
• Low CAPEX and OPEX Effective mixing
• High ROI The liquid feed (naphtha or mixed xylene) enters a Packinox
• Optimal mixing of the liquid feed and the recycle gas heat exchanger from the side and is mixed with the recycle
• Low pressure drop gas in the mixing chamber. The liquid is sprayed into the
• Ideal conditions for high yield recycle gas using Alfa Laval’s patented Spray Bars, ensuring
• Robust design and reliable operation a more homogenous liquid/gas mixture compared to tradi-
• Guaranteed performance tional mixing in the feed pipe. This optimizes heat transfer in
• Fully customized design for optimal performance the plate bundle and minimizes mechanical stress.
• Continuous follow-up from Alfa Laval
Thanks to Alfa Laval’s Spray Bar technology and the possi-
How it works bility to optimize the plates’ corrugation pattern according to
The core of an Alfa Laval Packinox heat exchanger is a fully operating conditions, Packinox heat exchangers offer greater
welded bundle of heat transfer plates. The counter-current flexibility than shell-and-tubes when setting the ratio between
flow of the hot and cold media in combination with the high the liquid feed and the recycle gas, allowing for smaller gas
turbulence maximizes heat transfer between the streams. flows without compromising lifting efficiency.
Manhole Vent
Robust design
Feed outlet Effluent inlet Alfa Laval Packinox heat exchangers are designed and built
for maximum operating reliability. The chevron pattern on the
heat transfer plates is produced using underwater explosion
Hot bellows
forming, a technique developed by Alfa Laval, in order to
maximize the mechanical strength of plates. Laser welding is
Effluent header used to ensure high weld quality and strength.
Feed header
We operate under a rigorous quality management system,

Bundle support and thorough inspections are performed at each step of the
production process.
Accessible for service

The plate pack is accessible for service through a manhole
at the top of the unit and through one of the bellows from
Welded the bottom. All welds can be repaired and channels can be
plate bundle plugged if necessary.
For more information about our service offer, see the

Alfa Laval Packinox service leaflet or our website:
Skirt
www.alfalaval.com/packinox.
Customized design
Liquid feed inlet
Each Packinox heat exchanger is designed and built to
the exact conditions it will operate under. Performance
Venturi is optimized by the right selection of plate pattern, gap
Cold bellows distance, plate dimensions, number of plates, ΔT and
pressure drop. The result is outstanding performance and
high cost efficiency.
Effluent outlet
Recycle gas inlet
Drain
Lifting Controller
Alfa Laval’s Lifting Controller software helps operators
optimize lifting, and is available for all Packinox heat
exchangers. An easy-to-read indicator shows when the liquid
feed/recycle gas ratio is optimal, making it easy to set the
correct flow rate of the gas.
The combination of Spray Bar technology, plate pattern

optimization and the Lifting Controller software gives
operators great flexibility and makes it easy to optimize the
liquid feed/recycle gas ratio, for example when changing
feedstock.
Low pressure drop with Wide Opening Design

A low operating pressure is key for high yield in catalytic
reforming and xylene production processes. Packinox
heat exchangers combine excellent heat recovery with low
pressure drop, usually within the range of 0.5 to 1.5 bar (total
flange-to-flange, both sides).
Thanks to Alfa Laval’s unique Wide Opening Design plates,

the pressure drop over the distribution area of the plates is
very low. This means more of the available pressure drop can
be utilized in the heat transfer area of the plate with maximum
heat recovery as a result. Packinox heat exchanger installed in a catalytic reforming unit.
Installation
Alfa Laval Packinox heat exchangers are installed in an
Key features
upright position (the pressure vessel is fitted with a skirt or
brackets) within minimal footprint. Lifting Controller
The Lifting Controller software ensures
Current size range maximum flexibility and makes it easy to
Shell diameter: 1 m to 6 m (3 to 18 ft.) set the optimum gas flow.
Shell total length: 10 m to 20 m (30 to 65 ft.)
Total weight: 30 to 400 metric tons (60,000 lb. to 600,000 lb.)
Equivalent S&T surface area: 1,000 to 35,000 m² (10,000 to Wide Opening Design
375,000 sq. ft.) in a single shell. With Wide Opening Design plates,
as much as possible of the available
Construction materials pressure drop is used for heat recovery.
Bundle
Stainless steel (SS 321, SS 316, SS 304, etc.). Qualified
construction materials include all types of austenitic stainless Lifetime Follow-Up
steel, including highly corrosion resistant Alloy 6 Mo. We continuously collect operating data,
and make recommendations on how to
Vessel improve performance.
Qualified construction materials include 1.25 Cr 0.5 Mo, 2.25
Cr 1.0 Mo, stainless steel, carbon steel or other qualities as
per customer requirements Spray Bar
Alfa Laval’s Spray Bar technology
Bellows ensures perfect mixing of the liquid feed
Inconel, Incoloy or other, subject to demand. and the recycle gas, resulting in high heat
transfer and reliable operation.
Pressure and temperature operating limits
Temperature Explosion Forming
The typical design temperature range is between 300°C The one-step forming process makes the
(570°F) and 550°C (570 - 1,000°F). Design temperatures as heat transfer plates strong and maximizes
high as 650°C (1,200°F) have been achieved. operating reliability.
Note: internal bellows compensate for thermal differential

expansion.
Pressure
Our reference list includes exchangers with design pressures
ranging from 3 bar to 140 bar.
Differential pressure between feed and effluent is the bundle’s

only mechanical limitation. As a conservative measure, we
currently limit this value to 55 bar (depending on the configu-
ration and operating temperature).
Codes and Standards

Alfa Laval Packinox’s quality and environmental management
systems are certified according to ISO 9001 and ISO 14001.
We comply with all international standards for pressure vessel

manufacturing, for example ASME U, U2, R, NB, as well as
all local standards (PED 97/23 EC, ATEX 94/9 EC, AS 12 10,
EN standards, CODAP, AD Merkblatter, IS 875 - IS 1893,
RACCOLTA VSR-M-S, High Pressure Gas Control Law,
Gosgortekhnadzor Permit, Gost R GOST, PD PTM 2615,
SNIP II.11, OTY1, etc.)
Alfa Laval’s unique Spray Bar technology ensures effective
mixing of the liquid feed and the recycle gas. The gas enters from
the bottom and passes the Spray Bars where the liquid feed is
sprayed into the gas.
100001034-1 EN 1901 Alfa Laval reserves the right to change specifications without prior notification.
How to contact Alfa Laval

Up-to-date Alfa Laval contact details for all
countries are always available on our website
at www.alfalaval.com

Alfa Laval Packinox: Combined Feed/effluent Heat Exchangers

Uploaded by

Copyright:

Available Formats

Alfa Laval Packinox: Combined Feed/effluent Heat Exchangers

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Alfa Laval Packinox: Combined Feed/effluent Heat Exchangers

Uploaded by

Copyright:

Available Formats

Alfa Laval Packinox

Combined feed/effluent heat exchangers

Thanks to its unique design, a Packinox combines the

The result is a compact heat exchanger with high capacity,

There are currently more than 350 Packinox heat exchangers

We operate under a rigorous quality management system,

Accessible for service

For more information about our service offer, see the

The combination of Spray Bar technology, plate pattern

Low pressure drop with Wide Opening Design

Thanks to Alfa Laval’s unique Wide Opening Design plates,

Note: internal bellows compensate for thermal differential

Differential pressure between feed and effluent is the bundle’s

Codes and Standards

We comply with all international standards for pressure vessel

How to contact Alfa Laval

You might also like