SEMIKRON DataSheet SKD 35 07612840

SKD 35
3)
VRSM, VRRM VRMS ID = 36 A (Tc = 70 ºC)
V V Types
400 125 SKD 35/04
800 250 SKD 35/08
1000 310 SKD 35/10
1200 400 SKD 35/12
1400 440 SKD 35/14
1600 500 SKD 35/16
Symbol Condition Values Units

ID Ta = 45 ºC, P1/120 natural cooling 28 A
2)
Ta = 45 ºC, chassis 14,5 A
IDCL Tc = 35 ºC, P1/120 forced cooling 36 A
Square bridge Tc = 45 ºC, P1/120 natural cooling
2)
28 A
Ta = 45 ºC, chassis 14,5 A
Power Bridge Rectifiers IFSM Tvj = 25 ºC ; 10 ms 370 A

Tvj = 150 ºC ; 10 ms 320 A
2 2
it Tvj = 25 ºC ; 8,3 ...10 ms 680 As
2
Tvj = 150 ºC ; 8,3 ...10 ms 500 As
SKD 35
VF Tvj = 25 ºC, IF = 150 A max. 1,90 V
V(TO) Tvj = 150 ºC 0,85 V
Features rT Tvj = 150 ºC 7 m
 Square plastic case with isolated IRD Tvj = 25 ºC ; VRD = VRRM 300 µA
metal base plate and fast-on IRD Tvj = 150 ºC ; VRD = VRRM 5 mA
connectors trr Tvj = 25 ºC Typ. 10 µs
 Blocking voltage up to 1600 V fG 2000 Hz
 High surge currents 1)
 Notch moulded in casing for easy Rth(j-a) isolated 14 K/W
2)
polarity identification chassis 3,8 K/W
 Easy chassis mounting Rth(j-c) total 1,0 K/W
Rth(c-s) total 0,15 K/W
Tvj -40 ... +150 °C
Typical Applications Tstg -55 ... +150 °C
 Three phase rectifier for power
supplies Visol a. c. 50 ... 60 Hz; r.m.s.; 1 s / 1 min. 3000 / 2500 V~
 Input rectifiers for variable Ms to heatsink SI units 2 ± 15 % Nm
frequency drives US units 18 ± 15% Lb. in.
 Rectifier for DC motor field supplies M approx. 23 g
 Battery charger rectifiers
 Recommended snubber network: Case G 11b
RC: 50 , 0.1 µF (PR = 1 W)

1) Freely suspended or mounted on an
insulator
2) Mounted on a painted metal sheet of
min. 250 x 250 x 1 mm
3) Recommended
SKD
1 01-08-2016 RP © by SEMIKRON
SKD 35
Fig. 01 Power dissipation vs. output current Fig. 02 Power dissipation vs. case temperature
Fig. 04 Forward characteristics of a diode arm (typical) Fig. 05 Transient thermal impedance vs. time
SKD 35
Dimensions in mm
Case G11b
*IMPORTANT INFORMATION AND WARNINGS

The specifications of SEMIKRON products may not be considered as guarantee or assurance of product
characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual
characteristics of products to be expected in typical applications, which may still vary depending on the specific
application. Therefore, products must be tested for the respective application in advance. Application adjustments
may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding
SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical
injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that
the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise
explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON,
SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the
use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no
liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without
limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not
assume any liability arising out of the applications or use of any product; neither does it convey any license under its
patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes
no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any
third party which may arise from applications. Due to technical requirements our products may contain dangerous
substances. For information on the types in question please contact the nearest SEMIKRON sales office. This
document supersedes and replaces all information previously supplied and may be superseded by updates.
SEMIKRON reserves the right to make changes.

SEMIKRON DataSheet SKD 35 07612840

Uploaded by

Copyright:

Available Formats

SEMIKRON DataSheet SKD 35 07612840

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SEMIKRON DataSheet SKD 35 07612840

Uploaded by

Copyright:

Available Formats

SKD 35

Symbol Condition Values Units

Power Bridge Rectifiers IFSM Tvj = 25 ºC ; 10 ms 370 A

*IMPORTANT INFORMATION AND WARNINGS

You might also like