ROUGH TERRAIN

HYDRAULIC CRANE
•••••••••••••••••••••
 Dimensions

44' 1.83"
(13458 mm)
C
L
ROTATION

11' 10.88"
(3629 mm)

1' 5.69"
1' 7.49" (449 mm)
(495 mm)

11.05"
(281 mm)
22 DEGREES

13' 4.00"
(4064 mm) 20 DEGREES
16' 10" 11' 3.12" 11' 11.12"
(5131 mm) (3432 mm) (3635 mm)
26' 3.75"
(8020 mm)

TAIL SWING
13' 7.95"
(4164 mm)

TRACK
8' 2.44"
(2500 mm)

TURNING RADIUS
2 WHEEL STEER
37' 3" (11342 mm) 10' 10.94"
4 WHEEL STEER (3326 mm)
22' 2" (6743 mm)

10' 5.00" (3175 mm) RETRACTED

17' 4.00" (5283 mm) MID EXTEND
Note: ( ) Reference dimensions in mm 23' 4.00" (7112 mm) FULL EXTEND

Weights
GVW Front Rear
lbs kg lbs kg lbs kg
RT760E Basic Machine 83,683 37,959 40,130 18,203 43,553 19,756
ADD: 33 - 56 ft Bi-fold swingaway 2,340 1,061 3,686 1,672 -1,346 -611
ADD: 33 ft swingaway 1,640 744 2,880 1,306 -1,240 -562
ADD: Aux Hoist w/rope 625 284 -230 -104 855 388
ADD: Aux boom nose 130 59 374 170 -244 -111
ADD: 60 ton (55mt) 5-sheave block
(stowed in trough) 1,250 567 1,250 567 0 0
ADD: 50 ton (45mt) 3-sheave block
(stowed in trough) 1,000 454 1,000 454 0 0
ADD: 8.3 ton (7.5mt) headache ball
(hanging from aux nose) 347 157 565 256 -218 -99
Remove: counterweight -12,150 -5,511 4,784 2,170 -16,934 -7,681

2 GROVE RT700E Series

 Working Range
Bi-fold Swingaway

36 - 110 ft. 33 - 56 ft. 12,150 lbs. 100% 360°

(11 - 33.5 m) (10.1 - 17.1 m) (5511 kg)

WORKING RANGE DIAGRAM

(BOOM DEFLECTION NOT SHOWN) D6-829-101026
0°
180 56' EXT.
25°
170
40°
160
33' EXT.
150

140

BOOM LENGTH AND EXTENSION IN FEET

130

70° 110
120
60° 100
HEIGHT FROM GROUND IN FEET

110
50° 90
100
80
90
40°
70
80

30° 60
70
50
60
20° 40
50 36
40
10° 78°
30 MAX.
BOOM
20 ANGLE

0°
10

0
160 140 120 100 80 60 40 20
150 130 110 90 70 50 30 10
AXIS OF
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION ROTATION

DIMENSIONS ARE FOR

LARGEST GROVE FURNISHED
HOOK BLOCK AND HEADACHE
99.28" 104.10"
BALL, WITH ANTI-TWO
BLOCK ACTIVATED.

3 GROVE RT700E Series

Superstructure Specifications
Boom Swing
36 ft. - 110 ft. (11 m - 33.5 m) four-section, full-power Planetary swing with foot-applied multi-disc brake.
sequenced synchronized boom. Spring applied, hydraulically-released swing brake and
Maximum tip height: 119 ft. (36.4 m). plunger-type, one position, mechanical house lock
operated from cab. *Optional 360° mechanical swing
*Optional Fixed Swingaway Extension lock. Maximum speed: 2.5 RPM.
33 ft. (10.1 m) offsettable lattice swingaway extension.
Offsettable at 0°, 25° and 45°. Stows alongside base Counterweight
boom section. Maximum tip height: 150 ft. (45.8 m). 12,150 lbs. (5511 kg) pinned to superstructure.

*Optional Bi-Fold Swingaway Extension Hydraulic System

33 ft. - 56 ft. (10.1 m - 17.1 m) bi-fold lattice swingaway Three main gear pumps with a combined capacity of
extension. Offsettable at 0°, 25° and 45°. Stows 103 GPM (391 L/min), 135 GPM (511 L/min) with
alongside base boom section. Maximum tip height: optional air conditioning.
174.5 ft. (53.2 m). Maximum operating pressure: 4000 psi (27.6 MPa).
Two individual post pressure compensated valve banks.
*Optional 20 ft. (6.1 m) or 40 ft. (12.2 m)
Installs between boom nose and bi-fold extension, non- Return line type filter with full flow by-pass protection
stowable. Maximum tip height: 194 ft. (59.1 m)-20 ft. and service indicator. Replaceable cartridge with micron
insert, 214 ft. (65.2 m)-40 ft. insert. filtration rating of 5/12/16. 132 gallon (500 L) reservoir.
Integral oil cooler. System pressure test ports.
Boom Nose
Three nylatron sheaves (four with 60-ton rating) Hoist Specifications
mounted on heavy-duty tapered roller bearings with Main and Auxiliary Hoist:
removable pin-type rope guards. (Four and five Grove Model HO30G-16G
sheaves respectively with optional 18 x 19 wire rope.) Planetary reduction with automatic spring applied multi-
Quick-reeve type boom nose. disc brake. Grooved drum. Electronic hoist drum
*Optional removable auxiliary boom nose with rotation indicator and hoist drum cable followers.
removable pin type rope guard.
Maximum Single Line Pull: 18,180 lbs
Boom Elevation (8 246 kg)
One double-acting hydraulic cylinder with integral
holding valve provides elevation from -3° to 78°. Maximum Single Line Speed: 588 FPM
(179 m/min)
Load Moment Maximum Permissible Line Pull:
& Anti-Two Block System 16,800 lbs. (7 620 kg) w/standard 6 x 37 class rope
Standard “Graphic Display” load moment and anti-two 12,920 lbs. (5 879 kg) w/optional 18 x 19 class rope
block system with audio-visual warning and control lever
lockout. These systems provide electronic display of Rope Diameter: 3/4 in. (19 mm)
boom angle, length, radius, tip height, relative load
moment, maximum permissible load, load indication and Rope Length: 500 ft. (152 m)
warning of impending two-block condition. The standard *Optional 550 ft. (168 m) 18 x 19 class rope
Work Area Definition System allows the operator to pre-
select and define safe working areas. If the crane Rope Type:
approaches the pre-set limits, audio-visual warnings aid 6 x 37 class EIPS IWRC
the operator in avoiding job-site obstructions. *Optional 18 x 19 class rotation resistant

Cab Maximum Rope Stowage: 694 ft. (211 m)

Full-vision, all-steel fabricated with acoustical lining and
tinted safety glass throughout. Deluxe seat incorporates Optional H030G-26G Main Hoist
armrest-mounted hydraulic single-axis controllers. Dash Rope: 650' (198 m)
panel incorporates gauges for all engine functions. 6 x 37 class rope
Other standard features include: hot water heater, cab Stowage: 1193 ft. (355 m)
circulating air fan, sliding side and rear windows, sliding
skylight with electric wiper and sunscreen, electric
windshield wash/wipe, fire extinguisher and seat belt.

4 GROVE RT700E Series

Carrier Specifications
Chassis Tires
Box section frame fabricated from high-strength, low *29.5 x 25 - 28PR bias earthmover type.
alloy steel. Integral outrigger housings and front/rear *29.5R25 radial earthmover type.
towing and tie down lugs.
Lights
Outrigger System Full lighting package including turn indicators, head, tail,
Four hydraulic telescoping single-stage double box brake and hazard warning lights.
beam outriggers with inverted jacks and integral holding
valves. Three position settings, 100%, 50% and fully Maximum Speed
retracted. All steel fabricated, quick-release type round 23 MPH (37 km/h).
outrigger floats, 24 in. (610 mm) diameter. Maximum
outrigger pad load: 80,700 lbs (36,606 kg). Gradeability (Theoretical)
75% (Based on 89,000 lbs. [40 370 kg] GVW) 29.5 x 25
Outrigger Controls tires, pumps engaged, 110 ft. (33.6 m) boom, and bi-
Controls and crane level indicator located in cab. fold extension.

Engine Miscellaneous Standard Equipment

Cummins 6CT 8.3L diesel, six cylinders, turbocharged, Full width steel fenders, dual rear view mirrors,
215 bhp (160 kW) (Gross) @ 2,500 rpm. Maximum hookblock tiedown, electronic back-up alarm, light
torque: 610 ft. lbs. (827 N-m) @ 1,500 RPM. package, front stowage well, tachometer, rear wheel
position indicator, 36,000 BTU hot water heater, hoist
Fuel Tank Capacity mirrors, engine distress A/V warning system. Auxiliary
72 gallons (273 L) hoist control valve arrangement (less hoist). Ether
injection cold start aid (less canister) and immersion
Transmission type engine block heater, 120V 1500 watt.
Full powershift with 6 forward and 6 reverse speeds (3
speeds hi and 3 speeds low). Front axle disconnect for *Optional Equipment
4 x 2 travel. *AUXILIARY HOIST PACKAGE (includes Model
HO30G-16G auxiliary hoist with electronic hoist drum
Electrical System rotation indicator, hoist drum cable follower, 500 ft.
Two 12-volt maintenance free batteries. 12-volt starting (152 m) of 3/4 in.(19 mm) 18 X 19 class wire rope,
and lighting, circuit breakers. auxiliary single sheave boom nose.)
*AIR CONDITIONING PACKAGE (includes hydraulic
Drive driven 28,500 BTU air conditioning)
4x4 *AUXILIARY LIGHTING PACKAGE (includes cab
mounted, 360° rotation spotlight, cab mounted amber
Steering flashing light, and dual base boom mounted
Fully independent power steering:
floodlights)
Front: Full hydraulic, steering wheel controlled.
*CONVENIENCE PACKAGE (includes in cab LMI light
Rear: Full hydraulic, switch controlled.
bar)
Provides infinite variations of 4 main steering modes:
*“CE” Mark Conformance (includes European boom,
front only, rear only, crab and coordinated.
battery disconnect switch, 3rd wrap indicator, electric
Rear steer centered indicating light.
emergency auxiliary steering, dual axis joystick
4 wheel turning radius - 22 ft. 2 in. (6.7 m).
controllers)
Axles *Cross axle differential locks (front and rear)
Front: Drive/steer with differential and planetary *Full-length aluminum decking
reduction hubs rigid-mounted to frame. *Manual pump disconnect
Rear: Drive/steer with differential and planetary *Pintle hook - rear
reduction hubs pivot-mounted to frame. *360 degree NYC style positive swinglock
*Rubber mat for stowage trough
Oscillation Lockouts *PAT datalogger
Automatic full hydraulic lockouts on rear axle permit 8'' *Aluminum fender protectors
(20.3 cm) oscillation only with boom centered over the *Battery disconnect switch
front. *Denotes optional equipment

Brakes
Full hydraulic split circuit brakes operating on all
wheels. Spring-applied, hydraulically released axle-
mounted parking brake.

GROVE RT700E Series 5

 RT750E MAIN BOOM RATED LIFTING CAPACITIES IN POUNDS
36 FT. - 110 FT. BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0001
in Main Boom Length in Feet
Feet
36 40 50 **60 70 80 90 100 110
100,000 84,400 80,200 *62,500
10
(69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12
(65.5) (68.5) (73.5) (77) (78)
85,400 82,700 80,200 61,000 36,800 *36,800 *31,000
15
(59.5) (63.5) (70) (74) (76.5) (78) (78)
65,700 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20
(49) (55) (63.5) (69) (72) (75) (77) (78) (78)
52,800 52,450 51,850 41,800 36,800 34,000 30,000 27,000 24,000
25
(36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
42,150 39,600 38,000 33,400 29,000 25,300 24,200 22,000
30
(31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
31,750 29,750 28,700 25,000 22,200 21,750 20,000
35
(40) (51.5) (58) (63) (67) (69.5) (72)
24,450 24,750 23,600 22,000 20,200 19,000 18,500
40
(28) (45) (53) (59) (63) (66.5) (69)
19,750 19,700 18,800 17,800 17,300 17,300
45
(37) (47.5) (54.5) (59.5) (63) (66.5)
16,000 16,750 16,500 16,000 16,000 16,000
50
(26.5) (41) (49.5) (55.5) (60) (63.5)
13,650 14,300 14,100 14,100 14,100
55
(33.5) (44.5) (51) (56.5) (60)
11,150 12,000 12,200 12,200 12,200
60
(24) (38.5) (47) (52.5) (57)
10,100 10,800 10,600 10,600
65
(31.5) (42) (48.5) (53.5)
8,480 9,410 9,000 9,000
70
(22.5) (36.5) (44.5) (50)
8,100 7,800 7,800
75
(30) (40) (46.5)
6,920 6,600 6,600
80
(21.5) (34.5) (42.5)
5,800 5,800
85
(28.5) (38)
5,000 5,000
90
(20.5) (33)
4,440
95
(27.5)
3,880
100
(19.5)
Minimum boom angle (°) for indicated length (no load) 0
Maximum boom length (ft.) at 0° boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based on maximum boom angle.
Lifting Capacities at Zero Degree Boom Angle
On Outriggers Fully Extended - 360°
Boom Main Boom Length in Feet
Angle 36 40 50 **60 70 80 90 100 110
29,050 24,450 17,050 11,950 9,400 7,310 6,050 4,660 3,350
0°
(29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet. A6-829-101070
** Boom length is with inner-mid fully extended and outer-mid & fly fully retracted.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
6 GROVE RT700E Series
 RT760E MAIN BOOM RATED LIFTING CAPACITIES IN POUNDS
36 FT. - 110 FT. BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0001
in Main Boom Length in Feet
Feet
36 40 50 **60 70 80 90 100 110
120,000 84,400 80,200 *62,500
10
(69) (72) (76) (78)
100,000 84,400 80,200 62,500 *36,800
12
(65.5) (68.5) (73.5) (77) (78)
85,400 82,700 80,200 61,000 36,800 *36,800 *31,000
15
(59.5) (63.5) (70) (74) (76.5) (78) (78)
65,700 65,000 64,300 50,650 36,800 36,800 31,000 *29,100 *24,000
20
(49) (55) (63.5) (69) (72) (75) (77) (78) (78)
52,800 52,450 51,850 41,800 36,800 34,000 30,000 27,000 24,000
25
(36) (45) (56.5) (63.5) (68) (71) (73.5) (76) (77.5)
42,150 39,600 38,000 33,400 29,000 25,300 24,200 22,000
30
(31.5) (48.5) (57.5) (63) (67) (70.5) (72.5) (75)
31,750 29,750 28,700 25,000 22,200 21,750 20,000
35
(40) (51.5) (58) (63) (67) (69.5) (72)
24,450 24,750 23,600 22,000 20,200 19,000 18,500
40
(28) (45) (53) (59) (63) (66.5) (69)
19,750 19,700 18,800 17,800 17,300 17,300
45
(37) (47.5) (54.5) (59.5) (63) (66.5)
16,000 16,750 16,500 16,000 16,000 16,000
50
(26.5) (41) (49.5) (55.5) (60) (63.5)
13,650 14,300 14,100 14,100 14,100
55
(33.5) (44.5) (51) (56.5) (60)
11,150 12,000 12,200 12,200 12,200
60
(24) (38.5) (47) (52.5) (57)
10,100 10,800 10,600 10,600
65
(31.5) (42) (48.5) (53.5)
8,480 9,410 9,000 9,000
70
(22.5) (36.5) (44.5) (50)
8,100 7,800 7,800
75
(30) (40) (46.5)
6,920 6,600 6,600
80
(21.5) (34.5) (42.5)
5,800 5,800
85
(28.5) (38)
5,000 5,000
90
(20.5) (33)
4,440
95
(27.5)
3,880
100
(19.5)
Minimum boom angle (°) for indicated length (no load) 0
Maximum boom length (ft.) at 0° boom angle (no load) 110
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based on maximum boom angle.
Lifting Capacities at Zero Degree Boom Angle
On Outriggers Fully Extended - 360°
Boom Main Boom Length in Feet
Angle 36 40 50 **60 70 80 90 100 110
29,050 24,450 17,050 11,950 9,400 7,310 6,050 4,660 3,350
0°
(29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (104.2)
NOTE: ( ) Reference radii in feet. A6-829-101070
** Boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
GROVE RT700E Series 7
 RT700E SERIES 33 FT. - 56 FT. BI-FOLD SWINGAWAY BOOM EXTENSION
ON OUTRIGGERS FULLY EXTENDED - 360¡
33 ft. LENGTH 56 ft. LENGTH NOTES:
Radius 0¡ 25¡ 45¡ 0¡ 25¡ 45¡
in
Feet
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET 1. All capacities above the bold line are based
#0021 #0022 #0023 #0041 #0042 #0043 on structural strength of boom extension
30
11,650 and do not exceed 85% of tipping loads, in
(77.5)
accordance with SAE J765.
11,650 *6,700
35
(75.5) (78)
2. 33 ft. and 56 ft. boom extension lengths
10,850 *8,500 6,700
40
(73.5) (78) (76.5) may be used for single line lifting service.
10,000 8,500 *5,000 6,500
45
(71.5) (76.5) (78) (74.5) 3. Radii listed are for a fully extended boom
50
9,430 8,500 5,000 6,400 with the boom extension erected. For
(69.5) (74) (76.5) (73)
main boom lengths less than fully ex-
8,780 7,850 5,000 6,300 *5,100
55
(67.5) (72) (74.5) (71.5) (78) tended, the rated loads are determined by
60
8,130 7,200 5,000 6,200 5,100 boom angle. Use only the column which
(65) (70) (72) (69.5) (77) corresponds to the boom extension length
7,620 6,750 4,850 5,850 5,100 *3,000
65
(63) (67.5) (70) (67.5) (75) (78) and offset for which the machine is config-
7,110 6,300 4,700 5,500 5,100 3,000 ured. For boom angles not shown, use the
70
(61) (65) (67.5) (66) (73) (77) rating of the next lower boom angle.
6,700 5,950 4,600 5,200 4,800 3,000
75
(58.5) (63) (65) (64) (71) (75) WARNING : Operation of this machine
6,300 5,600 4,500 4,900 4,500 3,000
80
(56) (60.5) (62.5) (62) (69) (72.5)
with heavier loads than the capacities
5,880 5,250 4,450 4,600 4,100 2,800 listed is strictly prohibited. Machine tip-
85
(53.5) (58) (59.5) (60) (67) (70.5) ping with boom extension occurs rapidly
90
5,460
(51)
4,900
(55)
4,400
(57)
4,300
(58.5)
3,700
(65)
2,600
(68.5)
and without advance warning.
95
4,880
(48.5)
4,650
(52.5)
4,190
(54)
4,000
(56)
3,450
(62.5)
2,450
(66)
4. Boom angle is the angle above or below
4,300 4,400 3,980 3,700 3,200 2,300 horizontal of the longitudinal axis of the
100
(45.5) (49.5) (51) (54) (60.5) (63.5) boom base section after lifting rated load.
3,830 4,020 3,720 3,450 3,050 2,150
105
(42.5) (46.5) (47.5) (52) (58) (61) 5. Capacities listed are with outriggers fully
110
3,360
(39.5)
3,650
(43)
3,200
(49.5)
2,900
(55.5)
2,000
(58.5)
extended and vertical jacks set only.
2,880 3,150 2,950 2,750 1,940
115
(36) (39.5) (47.5) (53) (55.5)
2,400 2,650 2,700 2,600 1,890
120
(32) (35) (45) (50.5) (53)
1,970 2,200 2,400 2,370 1,840
125
(27.5) (30.5) (42) (47.5) (49.5)
1,550 2,100 2,150
130
(22) (39.5) (44.5)
1,850 1,950
135
(36.5) (41.5)
1,600 1,750
140
(33) (37.5)
1,350 1,450
145
(29.5) (33.5)
1,100
150
(25)
Minimum boom angle
(¡) for indicated length 21 25 45 25 28 45
(no load)
Maximum boom length
(ft.) at 0¡ boom angle 100 90
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-101043
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
8 GROVE RT700E Series
 Working Range
Bi-fold Swingaway

36 - 110 ft. 20 & 40 ft. 12,150 lbs. 100% 360°

(11 - 33.5 m) INSERTS (5511 kg)

230
220 0°
56' EXT.
25°
210
45°
200
33' EXT.
190
180
170
160
150
140
130
120 70° 110

110 60° 100

100 50° 90

90 80
40°
80 70

70 30° 60

60 50

50 20° 40
36
40
30 10° 78°
MAX.
BOOM
20 ANGLE
10 0°

0
200 180 160 140 120 100 80 60 40 20
190 170 150 130 110 90 70 50 30 10 AXIS OF
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION ROTATION

DIMENSIONS ARE FOR

LARGEST GROVE FURNISHED
99.28" 104.10" HOOK BLOCK AND HEADACHE
BALL, WITH ANTI-TWO
BLOCK ACTIVATED.

GROVE RT700E Series 9

 33 FT. - 56 FT. FOLDING BOOM EXTENSION + 20 FT. INSERT
ON OUTRIGGERS FULLY EXTENDED - 360°

33 ft. LENGTH 56 ft. LENGTH 1. All capacities above the bold line are
Radius based on structural strength of boom
0° 25° 45° 0° 25° 45°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET extension and do not exceed 85%
Feet
#0064 #0065 #0066 #0084 #0085 #0086 of tipping loads, in accordance with
35
*9,360 SAE J-765.
(78) 2. 33 ft. and 56 ft. folding boom exten-
9,360 *6,300 sion lengths may be used for single
40
(77) (78)
line lifting service only.
8,480 *7,480 6,300
45
(75.5) (78) (77.5)
3. For main boom lengths less than 110
7,680 7,070 *5,880 6,000
ft. with the boom extension erected,
50 the rated loads are determined by
(73.5) (77.5) (78) (76.5)
6,990 6,470 5,880 5,990 boom angle. Use only the column
55
(71.5) (76) (77.5) (75) which corresponds to the boom ex-
60
6,390 5,970 5,480 5,980 *4,840 tension length and offset for which
(70) (74) (76.5) (73.5) (78) the machine is set up. For boom
5,890 5,570 5,080 5,510 4,840 angles not shown, use rating of the
65
(68) (72) (74.5) (72) (77.5)
next lower boom angle.
5,390 5,070 4,780 5,010 4,440
70
(66) (70) (72.5) (70) (76.5)
4. WARNING: Operation of this machine
4,990 4,770 4,480 4,560 4,050 *3,760
with heavier loads than the capaci-
75 ties listed is strictly prohibited. Ma-
(64) (68) (70.5) (68.5) (74.5) (78)
4,650 4,400 4,190 4,170 3,870 3,460 chine tipping with boom extension
80
(62) (66) (68.5) (67) (73) (76.5) occurs rapidly and without advance
85
4,300 4,150 3,890 3,820 3,570 3,260 warning.
(60) (64) (66) (65) (71) (74.5) 5. Boom angle is the angle above or be-
4,000 3,850 3,690 3,520 3,320 2,960 low horizontal of the longitudinal axis
90
(58) (62) (64) (63.5) (69.5) (73)
of the boom base section after lift-
3,760 3,650 3,500 3,220 3,070 2,770
95
(55.5) (59.5) (61.5) (61.5) (67.5) (71)
ing rated load.
6. Capacities listed are with outriggers
3,510 3,410 3,300 2,980 2,880 2,570
100 properly extended and vertical jacks
(53.5) (57.5) (59.5) (60) (66) (69)
3,260 3,210 3,100 2,780 2,680 2,460 set only.
105
(51) (55) (57) (58) (64) (67)
3,070 3,020 2,930 2,530 2,480 2,340
110
(48.5) (52.5) (54.5) (56) (62) (65)
2,870 2,870 2,780 2,340 2,280 2,200
115
(46) (50) (51.5) (54) (60) (63)
2,730 2,730 2,190 2,140 2,050
120
(43.5) (47) (52) (58) (60.5)
2,530 2,580 2,000 1,990 1,910
125
(40.5) (44) (50) (55.5) (58.5)
2,210 2,440 1,850 1,850 1,810
130
(37.5) (41) (48) (53.5) (56)
1,850 2,150 1,720 1,750 1,670
135
(34.5) (37.5) (45.5) (51) (53.5)
1,510 1,750 1,610 1,610
140
(30.5) (34) (43) (48.5)
1,200 1,520
145
(26.5) (46)
1,370
150
(43)
Minimum boom angle
(°) for indicated length 20 25 45 40 41 45
(no load)
Maximum boom length
(ft.) at 0° boom angle 90 70
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-101371A
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

10 GROVE RT700E Series

 33 FT. - 56 FT. FOLDING BOOM EXTENSION + 40 FT. INSERT
ON OUTRIGGERS FULLY EXTENDED - 360°

33 ft. LENGTH 56 ft. LENGTH 1. All capacities above the bold line are
Radius based on structural strength of boom
in #0064 #0065 #0066 #0084 #0085 #0086
extension and do not exceed 85%
Feet 0° 25° 45° 0° 25° 45°
of tipping loads, in accordance with
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
SAE J-765.
6,560
45
(78) 2. 33 ft. and 56 ft. folding boom exten-
5,960 4,510
sion lengths may be used for single
50 line lifting service only.
(76) (78)
5,360 5,860 4,210 3. For main boom lengths less than 110
55
(74.5) (78) (77.5) ft. with the boom extension erected,
4,860 5,260 *5,170 3,910 the rated loads are determined by
60
(73) (76.5) (78) (76) boom angle. Use only the column
65
4,370 4,870 4,670 3,710 which corresponds to the boom ex-
(71) (75) (77.5) (74.5) tension length and offset for which
3,970 4,370 4,270 3,410 *3,710 the machine is set up. For boom
70
(69.5) (73) (75.5) (73) (78)
angles not shown, use rating of the
3,670 4,070 3,980 3,220 3,420 next lower boom angle.
75
(67.5) (71.5) (73.5) (71.5) (77.5)
4. WARNING: Operation of this machine
3,270 3,670 3,680 2,820 3,120
80
(66) (69.5) (72) (70) (76)
with heavier loads than the capaci-
ties listed is strictly prohibited. Ma-
2,980 3,370 3,380 2,520 2,820 2,730
85 chine tipping with boom extension
(64) (68) (70) (68.5) (74.5) (77.5)
2,780 3,080 3,080 2,320 2,620 2,530 occurs rapidly and without advance
90 warning.
(62.5) (66) (68) (66.5) (72.5) (76)
2,480 2,880 2,890 2,030 2,330 2,340 5. Boom angle is the angle above or be-
95
(60.5) (64) (66) (65) (71) (74.5) low horizontal of the longitudinal axis
2,290 2,580 2,690 1,830 2,130 2,140 of the boom base section after lift-
100
(58.5) (62) (64) (63.5) (69.5) (72.5) ing rated load.
105
2,090 2,390 2,390 1,630 1,930 1,940 6. Capacities listed are with outriggers
(56.5) (60) (62) (62) (68) (71) properly extended and vertical jacks
1,900 2,190 2,200 1,440 1,730 1,740 set only.
110
(54.5) (58) (60) (60) (66) (69)
1,700 2,000 2,100 1,240 1,540 1,550
115
(52.5) (56) (58) (58.5) (64.5) (67)
1,600 1,800 1,910 1,140 1,340 1,450
120
(50.5) (54) (55.5) (57) (62.5) (65)
1,410 1,700 1,710 1,240 1,260
125
(48) (51.5) (53) (61) (63.5)
1,310 1,510 1,520 1,050 1,160
130
(46) (49.5) (50.5) (59) (61.5)
1,120 1,420 1,420
135
(43.5) (47) (48)
1,030 1,220
140
(41) (44.5)
1,130
145
(41.5)
1,040
150
(38.5)
No Load Stability Data
Min. boom
angle at 110' 37° 37° 45° 54° 56° 58°
boom length
Max. boom
length at 0° 70 ft. 40 ft.
boom angle
NOTE: ( ) Boom angles are in degrees. A6-829-101581
*This capacity is based upon maximum boom angle.
#LMI operating code. Refer to LMI manual for instructions.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

GROVE RT700E Series 11

 ON RUBBER CAPACITIES
STATIONARY CAPACITIES STATIONARY CAPACITIES
DEFINED ARC OVER FRONT (See Note pg. 10)
Radius #9005 Radius #9005
in Main Boom Length in Feet in Main Boom Length in Feet
Feet Feet
36 40 50 *60 70 36 40 50 *60 70
45,300 39,700 45,300 42,850 29,600
10 10
(69) (72) (69) (72) (76)
41,750 39,700 29,600 43,650 41,350 29,600
12 12
(65.5) (68.5) (73.5) (65.5) (68.5) (73.5)
29,350 26,450 26,450 26,450 38,300 36,300 29,600 20,900 17,300
15 15
(59.5) (63.5) (70) (74) (59.5) (63.5) (70) (74) (76.5)
17,800 17,650 17,050 16,250 16,250 31,150 29,550 25,900 20,900 17,300
20 20
(49) (55) (63.5) (69) (72) (49) (55) (63.5) (69) (72)
11,750 11,700 11,350 10,850 10,850 24,100 24,150 21,800 18,800 17,300
25 25
(36) (45) (56.5) (63.5) (68) (36) (45) (56.5) (63.5) (68)
8,040 7,820 7,470 7,470 17,400 17,200 15,300 15,300
30 30
(31.5) (48.5) (57.5) (63) (31.5) (48.5) (57.5) (63)
5,400 5,120 5,120 12,800 12,500 11,000
35 35
(40) (51.5) (58) (40) (51.5) (58)
3,660 3,200 3,430 9,720 9,390 9,390
40 40
(28) (45) (53) (28) (45) (53)
1,000 2,150 7,090 7,090
45 45
(37) (47.5) (37) (47.5)
1,150 5,310 5,310
50 50
(41.0) (26.5) (41)
Lifting Capacities at Zero Degree Boom Angle 3,870
On Rubber - Stationary 360 55
(33.5)
Boom Main Boom Length in Feet 3,170
60
Angle (24)
36 40 50
Lifting Capacities at Zero Degree Boom Angle
8,180 5,890 2,170 On Rubber - Defined Arc Over Front
(29.7) (34.2) (44.2)
Boom Main Boom Length in Feet
Note: ( ) Reference radii in feet. A6-829-101048
Angle 36 40 50 *60 70
#LMI operating code. Refer to LMI manual for instructions.
*60 ft. boom length is with inner-mid extended and outer-mid & fly 17,600 13,600 7,750 4,010 2,670
retracted. (29.7) (34.2) (44.2) (54.6) (64.2)
Note: ( ) Reference radii in feet. A6-829-101047
#LMI operating code. Refer to LMI manual for instructions.
*60 ft. boom length is with inner-mid extended and outer-mid & fly
retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
12 GROVE RT700E Series
 ON RUBBER CAPACITIES (cont'd.)

PICK & CARRY CAPACITIES (UP TO 2.5 MPH) -

BOOM CENTERED OVER FRONT (See note 7)
Radius #9006 NOTES TO ALL RUBBER CAPACITY CHARTS:
in Main Boom Length in Feet
Feet 1. Capacities are in pounds and do not exceed 75% of
36 40 50 *60 70 tipping loads as determined by test in accordance
42,500 37,600 30,700
10
(69) (72) (76)
with SAE J765.
12
42,500 37,600 30,700 23,450 2. Capacities are applicable to machines equipped
(65.5) (68.5) (73.5) (77)
37,600 37,600 30,700 19,700 16,250
with 29.5x25 (28 ply) tires at 65 psi cold inflation
15
(59.5) (63.5) (70) (74) (76.5) pressure.
32,950 32,900 30,700 19,700 16,250
20
(49) (55) (63.5) (69) (72) 3. Defined Arc - Over front includes 6¡ on either side
24,100 24,150 23,850 19,700 16,250 of longitudinal centerline of machine (ref. drawing
25
(36) (45) (56.5) (63.5) (68) C6-829-003529).
17,400 17,200 16,800 16,250
30 4. Capacities appearing above the bold line are based
(31.5) (48.5) (57.5) (63)
35
12,800 12,500 12,500 on structural strength and tipping should not be
(40) (51.5) (58) relied upon as a capacity limitation.
9,720 9,390 9,390
40
(28) (45) (53) 5. Capacities are applicable only with machine on firm
45
7,090 7,090 level surface.
(37) (47.5)
50
5,310 5,310 6. On rubber lifting with boom extensions not permit-
(26.5) (41)
ted.
3,870
55
(33.5) 7. For pick and carry operation, boom must be cen-
3,090 tered over front of machine, mechanical swing lock
60
(24)
Lifting Capacities at Zero Degree Boom Angle
engaged and load restrained from swinging. When
On Rubber - Pick & Carry handling loads in the structural range with capaci-
Boom Main Boom Length in Feet ties close to maximum ratings, travel should be
Angle 36 40 50 *60 70 reduced to creep speeds.
17,600 13,600 7,750 4,010 2,670
0¡
(29.7) (34.2) (44.2) (54.6) (64.2) 8. Axle lockouts must be functioning when lifting on
Note: ( ) Reference radii in feet. A6-829-101049 rubber.
#LMI operating code. Refer to LMI manual for instructions.
*60 ft. boom length is with inner-mid extended and outer-mid & fly 9. All lifting depends on proper tire inflation, capacity
retracted. and condition. Capacities must be reduced for
lower tire inflation pressures. See lifting capacity
chart for tire used. Damaged tires are hazardous to
safe operation of crane.
10. Creep - not over 200 ft. of movement in any 30
minute period and not exceeding 1 mph.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
GROVE RT700E Series 13
 WEIGHT REDUCTIONS FOR
LOAD HANDLING DEVICES

33 FT. - 56 FT.
FOLDING BOOM EXTENSION

*33 ft. Extension (Erected) - 5,080 lb.

*56 ft. Extension (Erected) - 11,330 lb.

*Reduction of main boom capacities

(no deduct required for stowed boom extension)

AUXILIARY BOOM NOSE 137 lb.

HOOKBLOCKS and HEADACHE BALLS:

60 Ton, 5 Sheave 1250 lb.+

50 Ton, 4 Sheave 1000 lb.+

50 Ton, 3 Sheave* 1000 lb.+

8.3 Ton Headache Ball (non-swivel) 350 lb.+

8.3 Ton Headache Ball (swivel)* 370 lb.+

* DO NOT use with 18x19 class of rope.

+Refer to rating plate for actual weight.

When lifting over swingaway and/or jib combina-

tions, deduct total weight of all load handling
devices reeved over main boom nose directly
from swingaway or jib capacity.

NOTE: All load handling devices and boom attach-

ments are considered part of the load and suitable
allowances MUST BE MADE for their combined
weights. Weights are for Grove furnished equip-
ment.

14 GROVE RT700E Series

 LINE PULLS AND REEVING INFORMATION
PERMISSIBLE NOMINAL
HOISTS CABLE SPECS.
LINE PULLS CABLE LENGTH

3/4" (19 mm) 18x19 Class

Main & Aux. Rotation Resistant 12,920 lb. 550 ft.
Min. Breaking Str. 64,600 lb.
3/4" (19 mm) 6x37 Class,
Main EIPS, IWRC Special Flexible 16,800 lb. 500 ft.
Min. Breaking Str. 58,800 lb.

GROVE RT700E Series 15

 WORKING AREA DIAGRAM

360° CENTERLINE
CENTERLINE
OVER OF OUTRIGGER
OF BOOM
SIDE SUPPORT

LONGITUDINAL
CENTERLINE
OF CRANE

CG OF OVER OVER
LOAD FRONT REAR

SEE NOTE
AT BOTTOM

DIAGRAM
FOR LIFTING CENTERLINE
ON OUTRIGGERS OVER
OF ROTATION
SIDE

REAR AXLE
OSCILLATION
360°
LOCKOUTS MUST
BE SET TO
BOOM MAINTAIN 360°
CENTERED CAPACITIES
OVER FRONT

6°

12°

FRONT

DIAGRAM C6-829-003529
FOR LIFTING C6-829-001159
ON TIRES

BOLD LINES DETERMINE THE LIMITING POSITION OF ANY

LOAD FOR OPERATION WITHIN WORKING AREAS INDICATED

16 GROVE RT700E Series

 Features and Benefits

▲
Hot water heater cab with defroster, sliding
skylight with sunscreen, armrest-mounted single
axis controls & easy access circuit breakers for
comfort

▲
110 ft. (33.5 m) Four-section
full power MEGAFORM™
boom with “quick reeve”
boom nose

▲
Optional 33-56 ft. (10.1-17.1 m) bifold swingaway
extension; Maximum tip height: 174.5 ft. (53.2 m);
Maximum working radius: 150 ft. (45.7 m)
▲

Optional aluminum decking & fenders for

walking surface area
▲

Optional 20 ft. (6.1 m) or 40 ft. (12.2 m) swingaway

extension insert; Maximum tip height: 20 ft.--194 ft.
(59.1 m); 40 ft.--214 ft. (65.2 m)

Grove Worldwide - World Headquarters

1565 Buchanan Trail East
P.O. Box 21
Shady Grove, Pennsylvania 17256-0021, U.S.A.
Constant improvement and engineering progress make it necessary that we reserve the right to make
specification, equipment, and price changes without notice. Illustrations shown may include optional Tel: (717) 597-8121
equipment and accessories and may not include all standard equipment. Fax: (717) 597-4062
GROVE® and GROVE LOGO are registered trademarks of GROVE in the U.S. and/or other countries.
www.groveworldwide.com
Copyright© 2000 GROVE. All rights reserved.
Form No.: RT700E Series Part No.: 3-1381 0301-4M Printed in U.S.A.