3S World leading company

3S Co., Ltd.
　1　
 MPseries
Features
Easy operation

LCD display

Protection against lightning

Flexible configuration

Feedback signal function (option)

HART communication (option)

Specification
Specification MP
4 to 20 mA（minimum range: 4 mA）minimum drive current : 3.8 mA *1
Input signal
（Voltage across terminals 10.5 V Typ）
Supply air pressure 0.14 to 0.50MPa
Linear motion: 10 to 100 mm Rotation angle of feedback lever 45° （40 to 100°）
Stroke / Open angle
Rotary motion: Rotation angle of feedback lever 40 to 100°
Air connection Standard: Rc 1/4（Pressure gauge Rc 1/8） Option: 1/4 NPT（Pressure gauge 1/8 NPT）
Power connection Standard: G 1/2 Option1: 1/2 NPT Option2: M20 × 1.5（Not available for TIIS flameproof.）
Protection of enclosure IP65（IEC 60529:1989 / AMD2:2013）
Type of Protection Standard: Non-explosion proof（Flameproof construction Ex d IIC T6）
Standard model: ‒20 to 80℃
Operating temperature range
Frameproof model: ‒20 to 60℃
Flow characteristics Linear, near equal-percentage, quick open, user setting（17 setting points)
Manual action A/M switch function（Single acting only）
Weight Approx. 3.8 kg
Material Aluminum Diecasting
*1 In case input signal goes below this limit, the unit goes "wait mode" (shutdown status). To change settings, at least 4 mA power is required.

Option
Function Items Specification
Output signal range 4 to 20 mA（reverse output is available）
Feedback signal Input voltage 12 to 36 V DC（Flameproof:12 to 24 V DC）
Accuracy ± 1.0% F.S. to the position cognized internally
Communication function HART communication HART7
* In case input signal goes below 3.8mA, the feedback signal falls stand-by value.

Easy operation with 4 buttons Rotatable LCD display

2　
 Smart Positioner MP100

Notation table
1 2 3a 3b 3c 4 5 6

Specification Definition Code

1 Series Smart positioner MP1
Standard (non-explosion proof) 0
2 Housing
Flameproof Ex d IIC T6 6
Single acting, Rc 1/4 (gauge: Rc 1/8) 1
Double acting, Rc 1/4 (gauge: Rc 1/8) 2
3a Connection & acting
Single acting, 1/4 NPT (gauge: 1/8 NPT) 3
Double acting, 1/4 NPT (gauge: 1/8 NPT) 4
G1/2 1
3b Electric connection 1/2 NPT 2
M20 × 1.5 (Not available for TIIS flameproof.) 3
N/A 1
3c Option Feedback signal 2
HART communication 3
Non-explosion proof: ‒20 to 80℃
4 Ambient temp. 5
Ex d IIC T6: ‒20 to 60℃
Linear motion L
5 Actuator
Rotary motion R
0.2 MPa M2
86 Output press. gauge 0.4 MPa M4
1.0 MPa M0

Dimension
220.5
艦

MARK2
151

MARK1
G1/2 (NPT1/2 or M20×1.5)

Rc 1/4 (NPT 1/4)

OUTPUT 1
161
115

色艴良
18

Rc 1/4 (NPT 1/4)

62

OUTPUT 2

Rc 1/4 (NPT 1/4)

SUPPLY 34.5 50 33.5
Air Connection Port
Supply Port Output Port Gauge Port Mark 1
Rc 1/4 Rc 1/4 Rc 1/8 A
1/2 NPT 1/4 NPT 1/8 NPT B
93

Rc 1/4 Rc 1/4 1/8 NPT C

45°
38

Cable Entry Conduit

Cable Entry Conduit Mark 2 45°
38

G1/2 G
1/2 NPT N
3-M8×15
M20 × 1.5 M 86

　3　
 Xseries
POSI-POWER XE100 Features
Electric/Pneumatic Positioner
Mounting kits interchangeable
between E/P and P/P

Linear Motion and Rotary Motion are

available

3 kinds of pilot relays. normal,

stable and quick speed

No resonance 5 to 200 Hz (2G)

Innovative design supports various

mounting position

4 types of characteristics are

available with a single standard
cam

POSI-POWER XP100
Pneumatic/Pneumatic Positioner

n
Specification
XE XP
Specification Single acting Double acting Specification Single acting Double acting
4 to 20 mA/250 Ω Standard: 20 to 100 kPa
Input signal / Resistance Input signal
(1/2 split range adjustment is also available.) (1/2 split range adjustment is also availabe.)
Supply air pressure 0.14 to 0.7 MPa Supply air pressure 0.14 to 0.7 MPa
Linear motion: 10 to 100 mm Linear motion: 10 to 100 mm
Stroke / Open angle Stroke
Rotary motion: 60 to 90° Rotary motion: 60 to 90°
Standard: Rc1/4 (Gauge Rc1/8 ) Standard: Rc1/4 (Gauge Rc1/8)
Air connection Air connection
Option: 1/4 NPT (Gauge 1/8 NPT) Optional: 1/4 NPT (Gauge 1/8 NPT)
Electrical connection Standard: G1/2 (PF1/2) Option: 1/2 NPT *1 Standard: 0 to 0.2 MPa, 0 to 0.4 MPa, 0 to 1.0 MPa(R)
Pressure gauge
Wiring method Conduit method or Pressure-tight packing method （output pressure） Option: kPa (R, NPT), psi, bar (NPT)
*1 Standard: 0 to 0.2 MPa, 0 to 0.4 MPa, 0 to 1.0 MPa(R) Construction Non-explosion proof
Pressure gauge
(output pressure) Option: kPa (R, NPT), psi, bar (NPT) Standard: Linear characteristics
Cam
Protection of enclosure IP65 (IEC 529-1989) Option: Non-linear characteristics
Standard: (S) 20 to 83 ℃
Standard: Non-explosion proof Ambient
*2 Low temp. : (L) 50 to 60 ℃
Flameproof: Ex d IIB T6 temperature
Construction High temp. : (L) 0 to 100 ℃
Flameproof H2: Ex d IIB+H₂ T6
Standard: Linear characteristics Weight Approx. 1.3 kg Approx. 1.4 kg
Cam Base: Aluminium Diecasting
Option: Eq%, (S3 model) reverse Eq%, square-law
Standard: (S) -20 to 83℃ Material Standard cover: PBT resin (Mixed Glass Fiber)
Low temp. construction: (L) -50 to 60℃ Option cover: Aluminium Diecasting
*3
Ambient High temp. construction: (H) 0 to 100℃ *1 Contact us for kPa,psi,bar displays.
temperature Ex d IIB T6: -20 to 60℃ * Dry air (dew point ‒30℃ ) is required.
Ex d IIB+H₂ T6: -20 to 60℃ * Air filter 5 μm is required.

Weight Approx.2 to 2.6 kg Approx.2.3 to 2.7 kg

Base: Aluminium Diecasting
Material Standard cover: PBT resin (Mixed Glass Fiber)
Option cover: Aluminium Diecasting
*1 Contact us for kPa, psi, bar displays.
*2 Type of certificates are listed on the page 21.
*3 The explosion proof type is only available for the standard products.
* Dry air (dew point ‒30℃ ) is required.
* Air filter 5 μm is required.

4　
 Valve Positioner XE100 / XP100

Dimension
Linear motion / Side lever type Rotary motion / Linkage lever type

XE1●●-SS1 XE1●●-SS3

２５
１１８∼２０７
１７４（１８０）
３７（４３） １２９ ８ ３８∼４１ ４０ ３７ ３７ ９０°
３７（４３） １２９ ２３ １１ ４０ ３７ ３７

３１

３１
６９

５４

６９
４２

５４
４５°

４２
４２
５１

４２
５１
２７
１５５∼１５９

２７
１５５∼１５９
５
３−Ø６ １１

３４
Ｒｃ１／４ １１
３−Ø６

３４
（ＮＰＴ１／４） Ｒｃ１／４
（ＮＰＴ１／４）
４８∼５２

４８∼５２
２−Ｇ１／２（ＰＦ１／２）
２−Ｇ１／２（ＰＦ１／２）
６１ ２８ ７ ４８∼５２
６１ ２８ ７ ４８∼５２

XP10●-SS1 XP10●-SS3

２５
１１８∼２０７
１７４（１８０）
３７（４３） １２９ ８ ３８∼４１ ４０ ３７ ３７ ９０°
３７（４３） １２９ ２３ １１ ４０ ３７ ３７
３１

３１
６９

５４

６９
４２

５４

４２
４５°

４２
５１

４２
７１

５１
７１
２７

２７
３−Ø６ １１
８９ ７
Ｒｃ１／４ ８９ ７ ３−Ø６ １１
（ＮＰＴ１／４） Ｒｃ１／４
（ＮＰＴ１／４）

Linear motion / Back lever type Concentric rotary motion / Back lever type

XE1●●-SB4 XE1●●-SB7
５ ２７
２０
２５

２２．５°
２２．５°
１７４（１８０） １７４（１８０）
３７（４３） １２９ ８ ４４ ２５ ２５ ７９ ３７（４３） １２９ ８ １５ ４４ ２５ ２５ ７９
３９

３９
７７

７７
８７

８７

５６
４２

４２
６４

６４

３２
３５

３５

９０°
１５

Ｍ８（Ｍ６）
１５
４２

４２
４６

４６

２−Ｍ８×１１ ２−Ｍ８×１１
５９

５９
２７

２７
１５５∼１５９

１５５∼１５９

５ ５
２−Ｍ８×１１ ２−Ｍ８×１１
３−Ｍ８×１５ １１ ３−Ｍ８×１５ １１
３４

３４

Ｒｃ１／４ １１５ Ｒｃ１／４ １１５

（ＮＰＴ１／４） ３８∼４１ （ＮＰＴ１／４）
４８∼５２

４８∼５２

２−Ｇ１／２（ＰＦ１／２） ２−Ｇ１／２（ＰＦ１／２）

６１ ２８ ２２ ４８∼５２ ６１ ２８ ２２ ４８∼５２

XP10●-SB4 XP10●-SB7
５ ２７
２０
２５

２２．５° １７４（１８０）
２２．５° ３７（４３） １２９ ８ １５ ４４ ２５ ２５ ７９
１７４（１８０）
３７（４３） １２９ ８ ４４ ２５ ２５ ７９
３９
３９

７７

８７
７７

８７

５６
４２
６４

３２
３５

９０°
４２
６４
３５

Ｍ８（Ｍ６）
１５

４２
１５

４６

２−Ｍ８×１１
７１
４２

５９
４６

２−Ｍ８×１１
７１

５９

２７
２７

２−Ｍ８×１１
３−Ｍ８×１５ １１
２−Ｍ８×１１
３−Ｍ８×１５ １１ Ｒｃ１／４ １１５
Ｒｃ１／４ １１５ （ＮＰＴ１／４） ８９ ２２
（ＮＰＴ１／４） ８９ ２２ ３８∼４１

　5　
 Xseries Valve Positioner XE100 / XP100

Notation table
1 2 3 4 5 6 7 8 9
- /

Specification Definition Code

XE100 - I/P Positioner
1 Basic code XE 1 XP 1
XP100 - P/P Positioner
Non-explosion proof 0 0
2 Construction * Flameproof IP65 Ex d IIB T6 (TIIS) enclosure 5 ー
Flameproof IP65 Ex d IIB+H₂ T6 (TIIS) enclosure 6 ー
Single acting, Rc 1/4 1
Double acting, Rc 1/4 2
3 Connection & acting
Single acting, 1/4 NPT 3
Double acting, 1/4 NPT 4
Standard: 20 to 60 ℃ (Flameproof) Standard: 20 to 83 ℃ (Non-explosion proof) S
Ambient
4 Low temp construction: 50 to 60 ℃ L
temperature
High temp construction: 0 to 100 ℃ H
Linear motion / side lever type / 4 phases cam: linear & near equal % S1 / C1a
Rotary motion / linkage lever type / 2 phases cam: linear S3 / C3L
Rotary motion / linkage lever type / 2 phases cam: near equal % S3 / C3E
5&9 Mounting & Cam Rotary motion / linkage lever type / 2 phases cam: square-law S3 / C3B
Rotary motion / linkage lever type / 2 phases cam: near reverse equal % S3 / C3P
Linear motion / back lever type / 4 phases cam: linear & near equal % B4 / C4La
Rotary motion / top mount type / 2 phases cam: linear B7 / C7L
0.2 MPa, 0.4 MPa, 1.0 MPa M2, M4, M0
Outlet pressure 200 kPa, 400 kPa, 1000 kPa K2, K4, K0
6 gauge 30 psi, 60 psi, 150 psi P2, P4, P0
2 bar, 4 bar, 10 bar B2, B4, B0
Standard: with filter mesh protector F1 - F6
Standard: with cleaning pin Q1 - Q6
Stable: with filter mesh protector G1 - G6
Stable: with cleaning pin J1 - J6
Quick speed: with filter mesh protector R1
7 Pilot relay Quick speed: with cleaning pin T1
*Number represents orifice size:
                1= φ 5.0
                2= φ 2.0
                4= φ 1.0
                5= φ 0.7
                6= φ 0.45
4 to 20 mA M1 ー
4 to 12 mA M2 ー
12 to 20 mA M3 ー
8 Input signal
20 to 100 kPa ー B1
20 to 60 kPa ー B2
60 to 100 kPa ー B3
*Type of certificates are listed on the page 21.

6　
 Xwired Valve Positioner with wire feedback.
［Patented in Japan Patent number: 5443706］

Features
Wire feedback from valves

Independent from vibration and temperature

from valves

Tolerable for 10G, 1000Hz vibration

Linear motion
Free mounting style. Install positioner
anywhere you want, apart from actuator

Simple installation kits. Linear motion or

rotary motion is available
Rotary motion

Specification
E/P Positioner XE P/P Positioner XP
Specification Single acting / Double acting Specification Single acting Double acting
4 to 20 mA/250 Ω Standard: 20 to 100 kPa
Input signal / Resistance Input signal
(1/2 split range adjustment is also available.) (1/2 split range adjustment is also availabe.)
Supply air pressure 0.14 to 0.7MPa Supply air pressure 0.14 to 0.7 MPa
Stroke Linear: 20 to 100mm Rotary: 60 to 90° Linear motion: 20 to 100 mm
Stroke
Air connection Standard: Rc 1/4 Option: 1/4 NPT Rotary motion: 60 to 90°
Standard: Rc1/4 (Gauge Rc1/8)
Conduit method / Pressure-tight packing Air connection
Wiring method Optional: 1/4 NPT (Gauge 1/8 NPT)
method
*1 Standard: 0 to 0.2 MPa, 0 to 0.4 MPa, 0 to 1.0 MPa(R)
Standard: 0 to 0.2MPa, 0 to 0.4MPa, 0 to 1.0MPa Pressure gauge
Pressure gauge Option: kPa (R, NPT), psi, bar (NPT)
Option: kPa (R, NPT), psi, bar (NPT) （output pressure）
Protection of enclosure IP65 (IEC 529-1989) Construction Non-explosion proof
Dust proof & Weather proof Standard: Linear characteristics
Construction Exprosion-proof: Ex d IIB T6 Cam
Option: Non-linear characteristics
Exprosion-proof H2: Ex d IIB+H₂ T6 Standard: (S) 20 to 83 ℃
Cam Linear Ambient Low temp. : (L) 50 to 60 ℃
temperature
Standard: 20 to 83℃ (Flameproof: ‒20 to 60℃ ) High temp. : (L) 0 to 100 ℃
Ambient temperature Low temp.: 50 to 60℃ Base: Aluminium Diecasting
High temp.: 0 to 100℃ Material Standard cover: PBT resin (Mixed Glass Fiber)
Base: Aluminium Diecasting Option cover: Aluminium Diecasting
Materal Standard cover: PBT resin (Mixed glass fiber) *1 Contact us for kPa,psi,bar displays.
Option cover: Aluminium Diecasting * Dry air (dew point ‒30℃ ) is required.
± 2% (influenced by the length and * Air filter 5 μm is required.
Accuracy
installation posture of wire) Wire
Air consumption At SUP 0.4MPa, 10NL/min
Length 3m / 5m / 7m / 10m
370NL/min to SUP 0.4MPa
Output air capacity Stroke of wire 75 mm
(on condition OUT is open-to-air, Orifice φ 5)
Ambient Standard: 30 to 80℃
temperature
Standard: Dust proof & Weather proof
Housing
Option: bellous
Materials SUS

Notation table
Model notation
1 2 3 4 5 Specification Definition Code
- 1 Basic code Feedback wire FW
Standard 1
2 End cover
Bellous style 2
3m 3
5m 5
3 Length
7m 7
10m 10
4 Ambient temperature Standard: 30 to 80 ℃ S
Linear motion S1
5 Mounting
Rotary motion S3

　7　
 CEseries E/P positioner CE100

Features
Compact and lightweight

Linear motion and Rotary motion available

Split range available

AUTO / MANUAL function

Specification
Input Signal 4 to 20 mA/250 Ω
Supply air pressure 0.14 to 0.7 MPa(140 to 700 kPa)
Stroke / Angle Linear motion: 10 to 100mm Rotary motion: 60 to 90°
Air connection Standard: Rc1/4 (Gauge Rc1/8） Option: 1/4 NPT (Gauge 1/8 NPT)
Electrical connection G1/2 (Option: 1/2 NPT)
Wireing method Conduit method or Pressure-tight packing method
*1 Pressure gauge Standard: 0 to 0.2MPa, 0 to 0.4 MPa, 0 to 1.0 MPa Option: kPa, psi, bar
(output pressure)
Protection dust & drip-proof IP65
Construction
Explosion-proof: Ex d IIB T6
Cam Standard: Linear characteristics
*2 Ambient temperature Standard: 20 to 83℃ Flame proof: 20 to 60℃ Low temp.: 50 to 60℃ High temp.: 0 to 100℃
Weight Single acting: Approx. 2.2kg Doublea acting: Approx. 2.3kg
Base: Aluminium Diecasting
Material
Standard cover: Aluminium Diecasting
*1 Please contact us available combination of connection and units such as kPa, psi and bar.
*2 The explosion proof type is only available for the standard products.

Notation table
1 2 3 4 5 6 7 8 9
- /

Specification Definition Code

1 Basic code CE100 E/P positioner Rated dust and weatherproof (IP65) CE1
Non-explosion proof 0
Intrinsically Safe EExia IIC T4 to T6 (ATEX) 4
2 Construction
Flameproof Ex d IIB T6 (TIIS) 5
Non-explosion proof feedback signal 7
Single acting, Rc 1/4 1
Double acting, Rc 1/4 2
3 Functions and connections
Single acting, 1/4 NPT 3
Double acting, 1/4 NPT 4
Standard: ‒20 to 83℃ Flameproof: ‒20 to 60℃ Intrinsically safe (ATEX)
S
T6: ‒20 to 50℃ T5: ‒20 to 65℃ T4: ‒20 to 80℃
4 Ambient temperature Low temp. construction: ‒50 to 60℃ Intrinsically safe (ATEX)
L
T6: ‒40 to 50℃ T5: ‒40 to 65℃ T4: ‒40 to 65℃
High temp. construction: 0 - 100℃ H
Back lever (Linear motion) / 45°4 phase cam B5 / C5La
5&9 Mounting & cam
Back lever (Rotary motion) / 90°2 phase cam B6 / C6L
0 to 0.2 MPa, 0 to 0.4 MPa, 0 to 1.0 MPa
6 Outlet pressure gauge M2, M4, M0
Option: kPa, psi, bar
Single V1
7 Pilot relay
Double V2
4 to 20 mA M1
4 to 12 mA M2
8 Input signal
12 to 20 mA M3
User specified M4
8　
 CPseries P/P positioner CP200

Features
Compact and lightweight

Linear motion and Rotary motion available

Split range available

AUTO / MANUAL function

Specification
Input signal 20 to 100 kPa
Supply air pressure 0.14 to 0.7 MPa (140 to 700 kPa)
Stroke / Open angle Linear: 12 to 100 mm / Rotary: 60 to 90°
Standard: Rc1/4 (Gauge Rc1/8）
Air connection
Option: 1/4 NPT (Gauge 1/8 NPT)
*1 Pressure gauge Standard: 0.2MPa, 0.4 MPa, 1.0 MPa
(output pressure) Option: kPa, psi, bar
Standard: Linear characteristics
Cam
Option: Non-linear characteristics
Standard: 20 to 83℃
Ambient temperature Low temp.: 50 to 60℃
Hith temp.: 0 to 100℃
Weight Single acting: Appox. 1.1kg / Double acting: Approx. 1.3kg
Base: Aluminium Diecasting
Material
Standard cover: Aluminium Diecasting
*1 Please contact us available combination of connection and units such as kPa, psi and bar.

Notation table
1 2 3 4 5 6 7 8 9 10
- /

Specification Definition Code

1 Basic code CP200 P/P positioner Dust and weatherproof CP2
2 Construction Standard (Non-explosion proof) 0
Single acting, Rc 1/4 1
Double acting, Rc 1/4 2
3 Functions and connections
Single acting, 1/4 NPT 3
Double acting, 1/4 NPT 4
Standard: -20 to 83℃ S
4 Ambient temperature Low temp. construction: -50 to 60℃ L
High temp. construction: 0 to 100℃ H
Back lever (Linear motion) / 45° B8 / C8L
5&9 Mounting & cam
Back lever (Rotary motion) / 90° B9 / C9L
0 to 0.2 MPa, 0 to 0.4 MPa, 0 to 1.0 MPa
6 Outlet pressure gauge M2, M4, M0
Option: kPa, psi, bar
Single P1
7 Pilot relay Double P2
Reverse P3
20 to 100 kPa B1
8 Input signal 20 to 60 kPa B2
60 to 100 kPa B3

　9　
 TEseries

TE100 (with junction box) TE200 (without junction box)

Features
Small and lightweight design

Filter regulator directly attached (without piping)

Auto / manual function

Mounting brackets (wall or pipe)

Specification
Specification TE100 TE200

Supply air pressure 140 kPa

Output pressure 20 to 100 kPa

Input signal 4 to 20 mA

Accuracy Linearity: ± 0.2 ％ Hysteresis: ± 0.2 % Repeatability: ± 0.1 %

Required operating voltage 6.5 V @20 mA

Output air capacity Max. 40 Nℓ/min

Air consumption 3 Nℓ/min (4 Nℓ/min: with a filter regulator integrated)

Standard: -20 to 80 ℃
Ambient temperature
Flame proof: -20 to 60 ℃ ---------

Air connection Standard: Rc 1/4 (Gauge Rc 1/8), Option: 1/4 NPT (Gauge 1/8 NPT)

Electrical connection Standard: G1/2, Option: 1/2 NPT

Construction Explosion proof: TIIS flameproof Ex d IIB T6 ---------

Approx. 1.6 kg Approx. 1.3 kg
Weight
(1.8kg with a filter regulator integrated) (1.5kg with a filter regulator integrated)
Material Aluminum Diecasting

10　
 I/P Converter TE100 / TE200

Dimension
TE100 (with junction box)

１８０ １００．５ ７８
９８
３０
Ｐｒｅｓｓｕｒｅ Ｇａｕｇｅ Ｂｒａｃｋｅｔ Ｗ
（ＯＵＴＰＵＴ） ２−Ｍ８×１３
Ｃｏｎｄｕｉｔ Ｃｏｎｎｅｃｔｉｏｎ Ｐｏｒｔ Ｂｒａｃｋｅｔ Ｐ

４５
Ｇ１／２（ＮＰＴ１／２）

１１８

３８
※１６７．５
１３７

６２
Ｓｕｐｐｌｙ Ｐｏｒｔ

※８１
Ｍｉｎｉ−Ｓｅｔ
Ｓｕｐｐｌｙ Ｐｏｒｔ
ｗｉｔｈ Ｍｉｎｉ−Ｓｅｔ（ＳＳＳ Ｐｒｏｄｕｃｔ） ２ Ｐｉｐｅ
※６９．５ ５２ Ｏｕｔｐｕｔ Ｐｏｒｔ Ｏｕｔｐｕｔ Ｐｏｒｔ

TE200 (without junction box)

※１４４
１００．５ ７８
１０７
３０
Ｐｒｅｓｓｕｒｅ Ｇａｕｇｅ Ｂｒａｃｋｅｔ Ｗ
（ＯＵＴＰＵＴ） ２−Ｍ８×１３
Ｃｏｎｄｕｉｔ Ｃｏｎｎｅｃｔｉｏｎ Ｐｏｒｔ Ｂｒａｃｋｅｔ Ｐ
Ｇ１／２（ＮＰＴ１／２）

４５
１１８

３８
※１６７．５

Ｓｕｐｐｌｙ Ｐｏｒｔ
１３７

６２

※８１
Ｓｕｐｐｌｙ Ｐｏｒｔ
ｗｉｔｈ Ｍｉｎｉ−Ｓｅｔ（ＳＳＳ Ｐｒｏｄｕｃｔ） Ｍｉｎｉ−Ｓｅｔ
２ Ｐｉｐｅ
※６９．５ ５２ Ｏｕｔｐｕｔ Ｐｏｒｔ Ｏｕｔｐｕｔ Ｐｏｒｔ

Notation table
1 2 3 4 5 6 7 8 9
- /

Specification Definition Code

TE100 with junction box TE 1
1 Basic code
TE200 without junction box TE 2
Non-explositon proof 0
2 Construction
Ex d IIB T6 (TIIS) Flame proof 5
Rc 1/4 G 1/2 1 / R1
3&9 Air/Electrical connection 1/4 NPT G 1/2 3 / N1
1/4 NPT 1/2 NPT 5 / N1
Standard: -20 to 80 ℃
4 Ambient temperature S
Flame proof: -20 to 60 ℃
5 Auto-Manual function With Auto-manual function M
200 kPa K2
0.2 MPa M2
6 Pressure gauge
30 psi P2
2 bar B2
None G0
7 Pressure gauge Outlet only G1
Supply & Outlet G2
4 to 20 mA M1
4 to 12 mA M2
8 Input signal
12 to 20 mA M3
User's specified M4

　11　
 XRseries Filter Regulator XR100

Features
Compact and lightweight

No Bracket Required

2 air supply inlets and 3 air outlets available

Built-in Drain Plug

XR100 Polypropylene cloth-free filter

Panel mounting hole provided

Specification
Specification XR100
Ambient temperature Standard: 20 to 83℃ Option: 0 to 100℃
Pressure range 0.2 MPa, 0.4 MPa, 0.8 MPa
Output pressure gauge 0.2 MPa, 0.4 MPa, 1.0 MPa Option: kPa, psi, bar
Air connection (pressure gauge) Standard: Rc1/4(Gauge Rc1/8), Option: 1/4 NPT (Gauge 1/8 NPT)
Material Polypropylene cloth-free filter 5 μ
Filter element
Air resistance (Approx.) 1.5kPa at 100Nl/min, 4.5kPa at 300Nl/min, 9.0kPa at 600Nl/min
Air Consumption: Pressure setting (Max.) 0.5Nl/min : 0.14MPa, 0.6Nl/min: 0.24MPa, 0.7Nl/min: 0.40MPa
Max. air supply pressure 0.9MPa
Weight Approx. 260g

Notation table
1 2 3 4 5 Specification Definition Code
- / 1 Basic code XR100 - Filter Regulator XR 10
200 kPa (0.2 MPa) 2
2 Pressure range 400 kPa (0.4 MPa) 4
800 kPa (0.8 MPa) 8
Standard: -20 to 83 ℃ S
3 Ambient temp.
High temp construction: 0 - 100 ℃ H
0.2 MPa, 0.4 MPa, 1.0 MPa M2, M4, M0
Outlet pressure 200 kPa, 400 kPa, 1000 kPa K2, K4, K0
4 gauge 30 psi, 60 psi, 150 psi P2, P4, P0
2 bar, 4 bar, 10 bar B2, B4, B0
Air connection Rc1/4, 3 outlet model J3
Air connection 1/4 NPT, 3 outlet model U3
5 Connections
Air connection Rc1/4, 1 outlet model R1
Air connection 1/4 NPT, 1 outlet model N1

Dimension Characteristics
４５ ８３ REGULATION CHARACTERISTICS FLOW CHARACTERISTICS
□１６
Primarily Set Press. : 5 kgf/㎠ (72 psi) Prim, press. : 6 kgf/㎠ (86 psi)
３７ ５３ ３０
４
Ｐ２
2−M 4 H=7
Ｐ２

１６ ２１

Ｐ２ Ｐ２
Ｐ２

Ｐ１ Ｐ１
７７
Ｐ１

４０

（１） Ｐ１ Ｐ２
 
    Ｓｕｐｐｌｙ ｐｒｅｓｓｕｒｅ    Ｏｕｔｌｅｔ ｐｒｅｓｓｕｒｅ
    ｃｏｎｎｅｃｔｉｏｎ ｉｎｌｅｔ   ｃｏｎｎｅｃｔｉｏｎ ｏｕｔｌｅｔ
   ※Ｕｎｕｓｅｄ ｃｏｎｎｅｃｔｉｏｎ ｏｕｔｌｅｔｓ ｓｈｏｕｌｄ ｂｅ ｆｉｔｔｅｄ
    ｗｉｔｈ ｔｈｅ ａｔｔａｃｈｅｄ ｂｌｉｎｄ ｐｌｕｇ．
（２） Ｃｏｎｎｅｃｔｉｏｎ ｏｕｔｌｅｔ ｉｓ ＮＰＴ１／４ ｏｒ ＰＴ１／４
（３） Ｐｒｅｓｓｕｒｅ ｇａｕｇｅ ｃｏｎｎｅｃｔｉｏｎ ｏｕｔｌｅｔ ｉｓ ＮＰＴ１／８ ｏｒ ＰＴ１／８
（４） Ａ ｐｒｅｓｓｕｒｅ ｇａｕｇｅ ｗｉｔｈ ａ ｄｉａｍｅｔｅｒ ｏｆ ｕｐ ｔｏ ４３ｍｍ ｉｓ ｃｏｎｎｅｃｔａｂｌｅ（Ｏｐｔｉｏｎ）

12　
 ASseries Signal Emitter AS200

Features
Different 3 functions
「SOURCE」Mode 「READ」Mode (option)
Emit a current signal of 4 to 20 mA or 1 to 5 V. Display 4 to 20 mA current of circuit.
Functions as follows are available;
*Signal: 4 to 20 mA or 1 to 5 V
*Step: 25 ％ step or 0.01 mA step
*Display: in mA or %
「RECEIVE」Mode 「TWO-WIRE」Mode (option)
AS200 Display output signal of two-wire-system Available for loop testing of two-wire-system
transmitters, e.g. positioners, without external transmitters.
electric power provision.

LED light automatically on in response to ambient brightness

Selectable load high limit: 500 or 750

Specification
Specification Non-Rechargeable battery（200/201）
Accuracy SOURCE Mode ± 0.1 %F.S, RECEIVE & READ Mode ± 0.15 %F.S *1
SOURCE MODE Current(4 to 20 mA) 0 to 23 mA (-25 to 119 %) , Voltage(1 to 5 V) 0 to 5.76 V (-25 to 119%)
Input / Output range RECEIVE / 2 WIRE MODE 0 to 23 mA (-25 to 119 %) MAX loop voltage in 2 WIRE MODE: MAX 35V
READ MODE 0 to 24 mA (-25 to 125 %)
Current (at 20 mA) *2 L load mode: 500 Ω MAX / H load mode: 750 Ω MAX
Drive load capacity
Voltage (at 5V) 10mA MAX.
Display（LCD） 3,1/2 digits
Temperature influence 50 PPM (TYP.) /℃
SOURCE/RECEIVE L load mode Approx. 7 hours/Full output
*3 Mode H load mode Approx. 5 hours/Full output
Battery life SOURCE(1-5V) Mode Approx. 8 hours in L load mode / Approx. 5 hours in H load mode
READ/2WIRE Mode Approx. 50 hours
Battery Non-Rechargeable battery (9 V, 006 P) × 1 *4
Recharging time ―
Ambient recharging temperature ―
Length of rechargeable battery life ―
Ambient operating temperature 0 to 50 ℃
Ambient storage temperature -20 to 70 ℃
Dimemsions 145 × 80 × 40
Weight Approx. 320 g
Connecting cord / Carrying case / Non-Rechargeable battery
Accessories
Option: AC adaptor (9 V, 300 mA)
*1 FS. Current at 16mA (20 to 4 mA), Voltage at 4V (5 to 1 V)
*2 Drive load capacity at 119 % (23 mA) max output is 90 % of the capacity at 100 % (20mA) output.
*3 Effected by the battery capacity and ambient temperature. Using LED light may shorten the battery life.
*4 Only Alcaline battery is available. Manganese Battery is not available.

Notation table
1 2 3 S 4 Specification Definition Code
-
1 Basic code AS200 - Signal Emitter AS 2
2 Battery Non-Rechargeable battery 0
READ type 0
3 Mode
2 Wire type 1
Without AC adaptor S0
4 AC adaptor
With AC adaptor S1

Connection
RECEIVE Mode TWO-WIRE Mode

　13　
 XBseries
XB100
Features
Flow characteristics suitable for control valves

Secondary pressure partition plate (seal plate) to

detect stable secondary pressure

Built-in bypass valve for adjusting sensitivity

Filter for supply pressure side

All the exposed bolts and nuts are made of stainless

steel

Specification
Specification XB100
Max. supply pressure 1.03 MPa
Max. signal pressure 1.03 MPa
Max Cv. 1.2
Standard: ‒30 to 83 ℃
Ambient temperature
Option: ‒55 to 60 ℃ , 0 to 100℃
In/Out ratio 1:1
Connection Standard: Rc 1/4 Option: Rc 3/8, 1/4 NPT
Net weight Approx. 0.6 kg

Notation table
1 2 3 4 Specification Definition Code
1 Basic code XB100 - Booster Relay XB 1
‒30 to 83 ℃ 0
Ambient
2 ‒55 to 60 ℃ 1
temperature
0 to 100 ℃ 2
SUP: Rc 1/4 SIG: Rc 1/4 1
3 Air connection SUP: Rc 3/8 SIG: Rc 1/4 2
SUP: 1/4 NPT SIG: 1/4 NPT 3
With bracket B
4 Mounting bracket
Without bracket N

Dimension Characteristics
（Ｓ
ｉｇｎａ
ｌ Ｐ
ｒｅｓｓ．
＝０．
２ＭＰａ，
 Ｓｕｐｐ
ｌｙ Ｐ
ｒｅｓｓ．
＝０．
２５ＭＰａ）
（Ｃｖ）

１
ＳＩＧ
ｃｅｎｔ

ＳＳＳＣｏ．，Ｌｔｄ．
ｆ
ｏｗ Ｃｏｅｆｉ

０．
５

７６ ５０
ｌ
（Ｆ

５７ ２
2−Ø 9 ０
−４０％ −３０％ −２０％ −１０％ ０％ １０％ ２０％ ３０％ ４０％

ＳＩＧ
９．５

−０．
５
１０３

５７

ＳＵＰ ＯＵＴ
２３

−１
８２ ８６
（Ｏｕｔｐｕｔ Ｐ
ｒｅｓｓ．
−Ｓｉ
ｇｎａ
ｌ Ｐ
ｒｅｓｓ．
）／Ｓ
ｉｇｎａ
ｌ Ｐ
ｒｅｓｓ（
．％）

14　
 Booster Relay XB100 / XB200

XB200
Features
Large Cv suitable for large valves

Secondary pressure partition plate to detect stable

secondary pressure

Built-in bypass valve for adjusting sensitivity

Filter for supply pressure side

All the exposed bolts and nuts are made of stainless

steel

Specification
Specification XB200
Max. supply pressure 0.99 MPa
Max. signal pressure 0.99 MPa
Max Cv. 2.6
Ambient temperature Standard: 30 to 80 ℃
In/Out ratio 1:1
Connection Standard: Rc 1/2 Option: 1/2 NPT
Net weight Approx. 1.5 kg

Notation table
1 2 3 Specifications Definition Code

1 Basic code XB200 - Booster Relay XB 2

Ambient
2 30 to 80 ℃ 0
temperature
Pneumatic SUP: Rc 1/2 (SIG : Rc 1/4) 1
3 connection SUP: 1/2 NPT (SIG : 1/4 NPT) 2
*Please ask us for mounting bracket.

Dimension Characteristics
（Ｓ
ｉｇｎａ
ｌ Ｐ
ｒｅｓｓ．
＝０．
２ＭＰａ，
 Ｓｕｐｐ
ｌｙ Ｐ
ｒｅｓｓ．
＝０．
２５ＭＰａ）
（Ｃｖ）

４０ １
２− M 8 H = 10
ｔ
ｃｅｎ

Ｒｃ１／４
ｉ
３５

ｆ
ｏｗ Ｃｏｅｆ

０．
５
ＳＵＰ
ＯＵＴ

ＳＩＧ
ｌ
（Ｆ

Ø１３０

０
−４０％ −３０％ −２０％ −１０％ ０％ １０％ ２０％ ３０％ ４０％
９０
１１９

−０．
５

Ｒｃ１／２ Ｒｃ１／２

８７

−１
（Ｏｕ
ｔｐｕ
ｔ Ｐ
ｒｅｓ
ｓ．−Ｓ
ｉｇｎａ
ｌ Ｐ
ｒｅｓ
ｓ．）
／Ｓｉ
ｇｎａ
ｌ Ｐ
ｒｅｓｓ（
．％）

　15　
 SEseries
Features
Durable SUS 304 frame

Easy and flexible installation and maintenannce.

Various output torque

Manual operation handle

Operation changeable by cam setting.

Specification
Specification Control Drive SE series
Structure Totally enclosed outdoor type
Ambient tempertature Standard: -10 to 50℃ High temp: 0 to 100℃
Humidity Below 85% (Noncondensing）
Rated use Continuity
Electric signal: DC 4 to 20 mA
Input signal
Pneumatic signal: 20 to 100 kPa
Supply air pressure 0.14 to 0.70 MPa
Air consumption 11 Nl/min at balancing position supplying air 0.4 MPa
Standard: SUS 304
Materials
Option: SS material (painted in Munsell 7.5BG 6/1.5 light gray)
Hysterisis 2%
Linearity ±3 %
Characteristics Linear, Equal%, Reverse equal%

Notation table
Rated Torque
N-m (kgf-m) Dimensions of the cylinder (mm)
Estimated
Supply air pressure
Model weight
The The (kg)
0.4 MPa 0.5 MPa 0.55 MPa diameter of Stroke diameter of
the piston the rod
SE-01H 123 (12.6) 152 (15.5) 167 (17.0) φ100 100 φ30 70
SE-02H 196 (20.0) 245 (25.0) 274 (28.0) φ125 100 φ36 80
SE-05H 323 (33.0) 412 (42.0) 451 (46.0) φ160 100 φ40 160
SE-08H 627 (64.0) 784 (80.0) 872 (89.0) φ180 150 φ45 190
SE-15H 1039 (106.0) 1313 (134.0) 1421 (145.0) φ200 200 φ50 280
SE-25H 1568 (160.0) 1960 (200.0) 2156 (220.0) φ200 300 φ50 380
SE-40H 2489 (254.0) 3126 (319.0) 3430 (350.0) φ250 300 φ60 440
SE-60H 4155 (424.0) 5194 (530.0) 5684 (580.0) φ300 350 φ70 620
SE-80H 5341 (545.0) 6664 (680.0) 7350 (750.0) φ300 450 φ70 720
SE-80H (IP-TYPE) 5428 (553.9) 6785 (692.3) 7464 (761.6) φ340 350 φ60 720
SE-100H (IP-TYPE) 6946 (708.8) 8683 (886.0) 9551 (974.6) φ385 350 φ70 820
SE-150H (IP-TYPE) 9923 (1012.6) 12404 (1265.7) 13645 (1392.3) φ385 500 φ70 1350
SE-200H (IP-TYPE) 12762 (1302.2) 15953 (1627.9) 17548 (1790.6) φ435 500 φ70 1500

*) NORMAL MODEL and IP-TYPE is different by the cylinder inside. So the rated torque is different, too.

16　
 Control Drive SE

Dimension
(mm)
Model W D H t （SE-01H ∼ 05H manual lever type）

SE-01H 360 475 595 16 Power Arm

Positioner

SE-02H 360 475 610 16 Output Shaft Current

Transmitter
Lever Arm

SE-05H 360 475 675 16

Limit Switch
Pressure Gauge

Auto-Manual

SE-08H 420 560 860 19 Manual

Handle
Change Valve
Air Cylinder

Filter Regulator

SE-15H 460 620 964 19 Lock up Valve

Terminal Block

SE-25H 530 755 1170 22

SE-40H 545 805 1285 22
（SE-08H ∼ 200H manual handle type）
SE-60H 630 930 1495 25 Chain Sprocket
Power Arm

Current
Transmitter

SE-80H 650 1050 1700 25 Output Shaft

Worm Wheel

Pressure Gauge

SE-80H (IP-TYPE) 682 912 1427 25 Lever Arm

Clutch Lever

Auto-Manual
Change Valve

SE-100H (IP-TYPE) 682 912 1427 25 Manual Handle Air

Cylinder
Positioner

SE-150H (IP-TYPE) 752 1077 1560 30 Clutch Unit

Lock up Valve

Mnual

SE-200H (IP-TYPE) 752 1077 1560 30

Operator Unit

Filter Regulator Terminal Block

*) Projections are not figured in this table.

（SE-01H ∼ 05H manual lever type） （SE-08H ∼ 200H manual handle type）
Required space for overhail. Eye Bolt Required space for overhail. Eye Bolt

Indicator
D W D W

Indicator

Clutch Lever

Lever Arm
Lever Arm
O An
pe g
ra le

O An
tin

pe g

H H
g

ra le
tin
g

Pressure Gauge
Pressure Gauge
Auto-Manual
Changerver Knob Auto-Manual
Changerver Knob

Supply Air Conn. Conduit Conn.

2-PT 1/4” 3-PF 3/4” Manual Operator
Manual Operator
Supply Air Conn. Conduit Conn.
2-PT 1/4” 3-PF 3/4”

N O T E N O T E
Shaft Center

1. Lever Arm can be installed at any direction 1. Lever Arm can be installed at any direction
around the shaft. around the shaft.
Shaft Center

Thickness:16t
2. Lever Arm can be installed at opposite side.
Thickness:19t

MOUNTING DIMENSIONS
MOUNTING DIMENSIONS

　17　
 SEseries
Setting characteristics of the equiptment with Cam
Concerning linear Cam, both linear（RA) linear（DA)
RA and DA characteristics are 100 open 0
（％）
designed face side. To change

LR

LD
75 25

from RA to DA and vice versa,

C3L
C3L
50 50

turn the Cam 180 degrees,

LD

LR
25 75
50%open open 50%open
both RA and DA. （％）0 100
0 25 50 75 100 0 25 50 75 100
Concerning Equal percent and input
（％） input
（％）

S quare - law, face side is reverse sq-law（RA) reverse sq-law（DA)

designed for RA and back side 100 open
（％）
is designed for DA.To change R
75 25

from RA to DA and vice versa,

C3E

50 50

turn the Cam face to back.

D
25 75
*) Explanation above is based 50%open open 50%open
（％）0 100

on the condition that signal 0 25 50

input
（％）
75 100 0 25
input
50
（％）
75 100

increase to counter clockwise.

square-law（RA) square-law（DA)
The condition signal increase
100 open
to clockwise will reverse all the D （％）
75 25
actions.
C3E

R 50 50

25 75
50%open open 50%open
（％）0 100
0 25 50 75 100 0 25 50 75 100
input
（％） input
（％）

Characteristic curve figure

SE-01H∼SE-08H SE-15H∼SE-200H

Supply Air Pressure Supply Air Pressure

(MPa) (MPa)
Pa

Pa
Pa

Pa
5M

M
4M

Pa Pa
55
4
5

M M
0.

0.
0.

0.

7 7
0. 0.
5480Nm(SA 0.55MPa)
830Nm(SA 0.56MPa)

OPERATING ANGLE(Deg.) TORQUE(Nm) ( X 98) OPERATING ANGLE(Deg.) TORQUE(Nm) ( X 980)

18　
 Control Drive SE

Installation chart
● Air Accessories
1. Pressure gauge
2. Filter regulator
3. Auto/Manual switch valve
4. Lock-up valve
5. Air Cylinder
6. Positioner
7. Solenoid valve
8. Master valve
9. Check valve
10. Air reserve tank
11. Speed controller

Organization Structure

Standard spare items

● A/M change valve (SH-7-1/4-B)
● Manual Handle ● Air Filter Regulator (AW30 or AW40)
● Pressure Gauge (P110×10)

　19　
 WPseries actuator for damper WP201

Features
Ambient temperature −10 to 83℃

IP / EP both available

Specification
Specification WP201 - Double Acting
Input signal 20 to 100 kPa (1/2 split available with range adjustment)
Supply air pressure 0.14 to 0.7MPa
Stroke 125 mm
Standard: Rc 1/4 (Pressure gauge Rc 1/8)
Air connection Option: 1/4 NPT (Pressure gauge 1/8 NPT)
Standard: 0.2MPa, 0.4MPa, 1.0MPa
Pressure gauge Option: kPa, psi, bar
Construction Dust proof & Weather proof
Cam Standard: Linear characteristics Option:Non-linear characteristics
Ambient temperature Standard: ‒10 to 83℃
Weight Approx. 8.0 kg
Material Body / Cover: Aluminum Diecasting
Cylindar Heat resistant (model: CA2C63-125-DCP5769P)
Linearity ± 3.5%
Hysterisys 2.0 %
Repeatability 1.0 %
Sensitivity 1.0 %
Range of supply air 0.3 % / 0.01 MPa
Tolerance by posture 10°: 0.5 % / 90°: 1.0 %
Resistance against vibration 1%/1G
Air consumption 10NL/min At SUP 0.4 MPa and Output75%balancing
Output air capacity 140NL/min At SUP 0.4 MPa
Balancing pressure 75 %

Dimension
65
63

417（ＭＡＸ ４３２） Ｓｔｒｏｋｅ １２５
153

+0.3
18 +0.1
-0.1
20 -0.3

φ12.5
φ12.5±0.05

Ｈ１０
70

φ13 ｄ９

20　
 Appendix

Type of flame-proof certificates of XE

Ex d IIB T6
TIIS
Ex d IIB+H₂ T6 corresponding Hydrogen
II 2GEx d IIB+H₂ T6Gb
ATEX 94/9/EC Standards: EN60079-0:2009
EN60079-1:2007
Ex d IIB T6Gb
IECEx02 Standards: IEC60079-0: 2007
IEC60079-1:2007
KOSHA Ex d IIB+H₂ T6Gb

FAQ for X series

Q We have SSS products and need to replace. How can we specify the full model?

A Please kindly inquire us with S/N, written on the product plate. We can specify full model No by that.

Q What is the range of air pressure for positioner?

A 140 to 700 kPa. Below 500 kPa is recommended. Also filter regulator XR100 is recommended for air suppily.

Q Is positioners available in high temperature environment?

High temperature model (0 to 100 ℃ ) is available.
A Please be noted that flame-proof product is limited to the use in ambient temperature -20 to 60 ℃ . High temperature model is not
flame-proof.

Q Concerning pressure gauge, psi indicator or NPT connection is available?

A We have option for indicator MPa, kPa, psi, bar. Also NPT is available. Please ask us for lead time.

Q How can we choose orifice dia?

A Please kindly refer to the table below.

Actuator type and Orifice dia

Actuator type Capacity of actuator (litter) Orifice dia
below 0.3 0.45
0.3 to 0.7 0.7
Double acting 0.7 to 1.5 1.0
1.5 to 10.0 2.0
10.0 or more 2.0 (5.0)
below 0.1 0.45
0.1 to 0.5 0.7
Single acting 0.5 to 1.0 1.0
1.0 to 3.0 2.0
3.0 or more 2.0 (5.0)
* Capacity of double acting actuator is total capacity of 2 rooms.

　21　
 Company Profile

3S was established in 1986 in Tokyo, Japan as a

unique expert-manufacturer of valve positioners. We
have been in service for over 30 years .
We are highly trusted in Japanese industry because
of high quality in products and services based on long
years of experience. Our products - E/P and P/P
positioners, smart positioners, I/P converters and
peripherals - are used in various industries.
Petrochemical, Chemical, Steel, Pulp & Paper, Power
& Gas and more. They are often selected especially
in hard-duty environment.
We have so much technological know-how that our
products can be attached to a variety of different valve
actuators.
We also serve various countries. We are willing to
support our customers anywhere in the world.

Tokyo
Location Osaka

Hanoi
3S Head office and factory are located in Tokyo,
Japan. This is our main manufacturing site.
We have sales branch at Osaka. Cooperating with
distributors, our service is broadly covering
customers all over Japan.
We have a representative office in Hanoi, Vietnam.
Based on this office we will offer our service and
products to Asian markets.

Vietnam
3S Co.,Ltd. (Representative office in Viet Nam)
14 Floor, VIT Tower, 519 Kim Ma Str, Ba Dinh Dist, Hanoi,
Vietnam.

22　
 3S Customers
3S is the number one supplier in Japanese positioner industry. We have OEM contracts with leading
Japanese valve manufacturers, with which we have been in long trusted relationship. We are very proud
that many of our customers are satisfied with our high quality products and service.

Customers
Asahi Organic Chemicals Industry Co., Ltd.
Azbil Corporation
NBS Corporation
OKM(OKUMURA ENGINEERING Corporation)
KITZ Corporation
Konan electronic Co.,Ltd.
CKD Corporation
CCI Corporation
Toko Valex Co.,Ltd.
Tomoe Valve Co.,Ltd.
Nihon KOSO Co.,Ltd.
Nippon Daiya Valve Co.,Ltd.
Dresser Japan, Ltd.
Pentair Valves & Controls Japan Co.,Ltd.
Motoyama Eng. Works, Ltd.
YKV Corporation

Sales Record
Domestic (Japanese) end users. Overseas sales
• Petrochemical  ■ Asia-Pacific
– JX (formerly Japan Oil), Idemitsu, Showa Shell, Cosmo Oil, etc. China, Taiwan, South Korea,VietNam,
• Chemical Philippines, Singapore, Thailand, India,
– Mitsubishi, Sumitomo, Mitsui, Asahi Kasei, Shin-Etsu, etc. Indonesia, Malaysia, Myanmar, Pakistan, Turkey
• Steel
– Nippon Steel & Sumitomo Metal, JFE, Kobe Steel, etc.
 ■ Middle East
• Pulp & Paper
Iran, Qatar, Saudi Arabia, UAE
– Oji Paper, Nippon Paper, Daio Paper, Rengo, etc.
• Power
– Tokyo Electric Power, Osaka EP, Tokyo Gas, etc.
 ■ Europe
Denmark, Germany, Portugal, Spain,
• Foods and Beverages
Coca-cola, Kirin, Sapporo, Suntory, Ajinomoto, etc Switzerland, UK, France
• Sugar
Nippon Beet Sugar, Hokkaido sugar, etc  ■ Other
Canada, Chile, USA, Zambia
Other Indusries
• Gas, Fiver, Medicine, Glass, Cigarettes, Plant
engineerings, Cement, Shipbuilders, etc

Sales partners
● Shanghai SSS Instrument Co.,Ltd. ● Korea
1010shi, A zuo, 988hao, Datonglu, Zhabeiqu, Shanghaishi Ucontech Co., Ltd.
TEL:+86-21-6630-7110 10F, Geumkang Bldg, 14-35, Yeouido-dong,
FAX:+86-21-3653-2336 Yeongdeungpo-Gu, Seoul, 150-871 Korea
E_mail: sss_cbi @126.com TEL: +82-2-780-6002(Rep)
FAX: +82-2-6008-6111
● Taiwan
Lamson Trading Corporation
2F, No.202 Pa teh Road Sec.2 Taipei Taiwan R.O.C.
台灣台北市松山區八德路二段 202 號 2F
TEL: +886-2-27521257(Rep)
FAX: +886-2-27711337
　23　
 3S Co., Ltd.

PUB-GN001-E-R1

24