Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

www.xeltek.

com

SuperPro 611S sales@xeltek.com

Low-Cost Stand-Alone Universal IC Programmer

Overview
SuperPro 611S is a cost-effective, reliable, and high-speed universal chip programmer. It is
designed to communicate using USB 2.0 port for development requirement and can also
work in standalone mode (without connecting to a PC) for production requirement. Comes
with free software updates.

Application and target customers: Electronic repair, car repair shops, medical devices,
students and hobbyists.

Advantages
 Ultra-Fast Programming Speed SuperPro 611S is designed with high programming speed
in mind. Our semiconductor manufacturer approved algorithms, precision and clean
signals guarantee high programming yield. Special design was made to eliminate
overshoot and ground bounce. Algorithms are performed with state machine
architecture constructed with FPGA to achieve an ultra-high programming speed.
PROGRAMMER FEATURES  Stand-Alone Mode SuperPro 611S is capable of operating in stand-alone mode. Under
stand-alone mode, it can be operated by an inexperienced operator with minimal
 SuperPro 611S supports 37,200+ IC training. Users can also use clusters of stand-alone programmers to achieve high
devices from 249 manufacturers and volume production. Last but not the least, stand-alone mode saves both the cost of PC
continuing. and labor of the trained and qualified operator.
 Ultra fast programming speed: programs  Tester for Logic Devices and SRAMS SuperPro 611S is also designed for IC testing of
and verifies 64 MB NOR Flash memory in various devices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.
11.3 seconds.  Technical Support Xeltek is proud to offer same day support for technical inquiries.
 Built with 48 pin drivers for support of
today’s most complex devices.
SuperPro 611S comes with
 Universal and device independent socket  Software CD
adapters are available for various package  AC Adapter
types.  USB Cable
 Two operating modes:
o PC mode via USB 2.0 port and PC
communication.
o Stand-Alone mode (no PC required).
 Cluster 1-15 units for volume production.
 Supports VCC from 1.2V to 5V. Specifications
 In-circuit programming capability
Devices Supported EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
available via ISP/ICP adaptor.
PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware
 Only IC manufacturer approved HUB, Microcontroller, MCU
programming algorithms are used for
Package Types DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP,
high reliability. VCC verification at (+5% -
Supported MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA,
5%) enhances programming reliability. FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.
 Provides over-current and over-voltage
PC Interface USB 2.0
protection for safety of the chip and
programmer hardware. PC Compatibility Windows XP/Vista/7/8/10 (32/64 bit)
 2 year warranty Stand-alone Memory Compact FLASH Card

Power Supply AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions Main unit: 80(L) x 57(W) x 30(H) mm Package: 130(L) x 110(W) x 50 (H) mm

Weight Main unit: Weight 1.35 lbs (0.6 Kg) Package: Weight 4 lbs (1.8Kg)

Xeltek and SuperPro are registered trademarks of Xeltek


Advanced Software Features
SuperPro 611S comes with a powerful and easy-to-use programming software. The
biggest advantage is its simplicity so that any operator can operate the
programmer with little or no training. SuperPro 611S software is supported on
Windows Vista. 7, 8, and 10.

Project Files The project file stores preparations before programming. Users could also restore and save work environment. The
project file includes device type, buffer data, operation option settings, configuration bit setting and batch commands. Project
files may be password protected to increase security and reliability when operated by untrained operators.

Auto Function The Auto function organizes different functions into a sequential group (erase, blank check, program, verify and
protect). Functions are executed in sequential order similar to a batch command.

Production Mode Once a chip is inserted correctly, the programmer automatically starts batch command of erase, blank check,
program and verify. Auto chip detection saves time and increases efficiency.

Production Statistics A log file could be sued to save operation information before exiting the program. Log files can also be
used to facilitate quality tracking.

Auto Recognition of File Types We support almost all kinds of known file formats including file formats with automatic
recognition function: Binary, Intel (linear & segmented) Hex, Motorola S, Tektronix (linear & segmented), JEDEC, POF, etc.

Factory Mode This mode is designed for factory volume production. To prevent operation errors from destroying the chips and
wrong data written to the chip, SuperPro 611S will operate in the Auto function mode. The administrator can set a password to
prevent unauthorized access to the system.

Auto Increment of Serial Numbers Auto-generation of electronic serial numbers is available on SuperPro 611S. This feature is
implemented by setting Auto Increment in Operation Option. Auto Increment allows users to add unique serial number into
the device. After each successful programming, the software automatically changes the value by the specified increment mode.

Intellectual Property Protection Password settings available in both PC and stand-alone mode.

Xeltek and SuperPro are registered trademarks of Xeltek

You might also like