WF5 Config Options

Table of Contents
Pro/ENGINEER Wildfire 5.0 Configuration Options 1
Pro/ENGINEER Wildfire 4.0 to 5.0 Configuration Options Changes 137
Parametric Technology Corporation iii Pro/ENGINEER Wildfire 5.0 Configuration Options

Pro/ENGINEER Wildfire 5.0 Configuration Options
Name Category Description Values Default value

accessory_window_display Without category Docked - Displays the accessory window undocked, docked docked
embedded in the active window.
Undocked - Displays the accessory
window as a stand alone window.
accuracy_lower_bound Environment Enter an accuracy value to override the 0.0001
default lower limit.The minimum value for
relative accuracy is 1E-06.
acis_export_params Data Exchange For ACIS interface allows to export object, yes, no no
feature and entity level parameters.
acis_export_units Data Exchange Allows selection of model units for ACIS in, ft, m, mm, cm, micron, default
export. default
acis_out_version Without category Allows the user to choose ACIS export 5, 4 5
version.
acrobat_reader Printing & Plotting Sets the Adobe Acrobat Reader command
path. This value will be used to launch the
reader after exporting a PDF document.
add_java_class_path Application Prepends the option value on the java
Programming environment variable, CLASSPATH, used
Interfaces to find classes in J-Link programs. To
specify multiple search paths in the same
line, delimit them using ':' on UNIX, and ';'
on Windows NT.
add_lower_level_comps_to_layer Layers Setting this option to yes will check off the yes, no no
Favor Current Layer option, which allows
lower level components to be added to top
level layers.
add_weld_mp Weld Yes - System includes welds when yes, no no
calculating mass properties and
approximates light weight weld mass
properties. No - System excludes welds
when calculating mass properties.
Parametric Technology Corporation 1 Pro/ENGINEER Wildfire 5.0 Configuration Options

advanced_intersection Assembly Control the appearance of the intersection yes, no no
tool and scope of available functionalities.
advanced_style_surface_edit Without category Use advanced options by default for yes, no no
Surface Edit in Style.
ae_propagate_detail_dependency User Interface Sets the AE detail dependency for AE's dependent, independent dependent
that are locally propagated. If set to
independent, the AE's parameter call outs
will update to other propagated AEs
parameters.
aec_dwg_anno_attrpar_spec_file Piping Specifies the aec drawing annotation aec_dwg_anno_attrpar
attribute/parameter specification file name. am_spec.ptd
aec_object_type_file Piping Specifies the aec object type file name. aec_object_type.ptd
aec_parameter_file Without category Specifies the file name of the user defined
piping parameter codes.
af_copy_references_flag User Interface Toggle display of Copy References no, yes no
column in Annotation Feature definition
dialog
align_cable_bundles Electromechanical Align NEWLY CREATED bundles where yes, no yes
they meet or branch out
allow_anatomic_features Features Allow the creation of pre-Pro/E 2000i yes, no no
geometry features including ear, neck, lip,
slot, flange, shaft, local push, radius dome
and section dome.
allow_confirm_window User Interface Display a confirmation window when yes, no yes
exiting Pro/ENGINEER. This enables you
to use the mouse to confirm/cancel exiting
Pro/ENGINEER.
allow_delete_many_in_drawings Without category Make the Delete Many command available yes, no no
in drawing mode. The Delete Many
command is not supported by undo but
can improve performance when deleting a
significant number of items.

allow_float_opt_checkout System Yes - Allows checkout failure for floating no, yes no
modules.
allow_fully_dependent_copy Features Enables the usage of advanced yes, no yes
copy/paste functionality tocontrol degree
of dependency on the pasted object.
allow_harn_mfg_assy_retrieval Electromechanical Allow to retrieve a harness mfg assembly yes, no no
directly.
allow_move_attach_in_dtl_move Drawing Yes - Move and Move Attach commands yes, no yes
in drawing mode act together. No - Move
and Move Attach commands in drawing
mode do not act together.
allow_move_view_with_move Drawing Disallow the movement of drawing views yes, no no
with the mouse.
allow_package_children Assembly Sets what type of children packaged all, feat, none all
components can have. ALL - Features and
components can be a children of
packaged component. FEAT - Only
features can be children of packaged
components. NONE - Packaged
components cannot have children.
allow_ply_cross_section Miscellaneous Yes - Enables Pro/COMPOSITE to create yes, no yes
a cross-section of composite plys.
allow_redo_intersections Assembly Yes - Displays the ReIntersect command yes, no no
in the ASSY FEAT menu.
allow_ref_scope_change Without category No - Displays the message "Reference yes, no yes
scope changes are prohibited by the
configuration file settings" when the Ref
Scope user interface is changed.

allow_refs_to_geom_reps_in_drws Drawing Yes - Allows you to create drawing yes, no no
references to geometry representations
(includes dimensions, notes, and leaders).
These references may become invalid if
the referenced geometry changes
resulting in geometry representations not
updating in drawings.
allow_rfs_default_gtols_always Dimensions & Yes - Enables RFS/Default gtols to be no, yes no
Tolerances created even when not permitted by ANSI
standard.
allow_save_as_instance Assembly Allows the option to save a copy of the yes, no no
active model as a family table instance.
allow_shrink_dim_before Casting & Mold Design Allow calculation before relations. yes, no no
allow_solid_perspective_hlr Model Display Yes - Allows a solid to be displayed with no, yes yes
hidden lines while in perspective.
allow_udf_style_cosm_threads Features Defines the Cosmetic Thread user yes, no no
interface. Yes - Creates a Cosmetic
Thread as a UDF. No - Creates a
Cosmetic Thread as a Cosmetic Thread
feature.
allow_update_part_simp_rep_data Assembly Allow updating part Simplified Rep data in yes, no, prompt yes
session automatically when switching from
one Simp Rep to another.Yes - Allow
updating part simplified rep data. No - Do
not update part simplified rep data. Prompt
- Prompt the user if the current simplified
rep should be updated.
allow_workpiece_silhouette Without category Determines if the workpiece is allowed for yes, no, auto no
Silhouette Mach Window creation. NO -
only reference part is allowed; YES - both
workpiece and reference part are allowed;
AUTO - only workpiece is allowed.

analysis_crt_tmp_file_on_regen File Storage & Determines whether regeneration of yes, no yes
Retrieval analysis features creates/updates tmp files
ang_dim_in_screen Dimensions & Yes - If the display is in the default yes, no no
Tolerances pan/zoom setting
(View>Pan/Zoom>Reset), the system
checks whether an angular dimension is
visible on the screen. If it is not visible,
then the system moves the dimension to a
visible location.
ang_units Environment Sets the display of angular dimensions to ang_deg, ang_min, ang_sec ang_deg
decimal degrees (ang_deg), degrees and
decimal minutes (ang_min) or degrees,
minutes and decimal seconds (ang_sec).
angle_grid_interval Features Modify grid space in angular units for 1
handle movement.
angular_tol Dimensions & An alternative format for setting default 0

Tolerances angular tolerance dimensions. The value
sets the number of decimal places, and
the tolerance is the actual tolerance value.
For integer dimensions, the value is zero,
and the tolerance is an integer.
angular_tol_0.0 Dimensions & Sets the default tolerance for angular 5
Tolerances dimensions. Each option sets a tolerance
for a specific decimal place. The value is
the place of the last decimal.

animate_explode_states Model Display Animate the transition between explode yes, no no
states and mold opening steps.
arc_radius_limit Without category Sets the upper limit for a radius in a -1
CIRCLE statement of NCL file. The value
must be positive. If not, 10*part_size is
used.
ask_designate_owners Without category Show the both required and optional yes, no yes
owners to be designated.
assemble_parent_connector Electromechanical Assemble parent connectors on locations yes, no yes
referencing a subconnector.
atb_auto_check_on_activate Data Exchange Sets state of ATB 'Auto Check Status On on, off off
Activate' toggle.
atb_auto_check_on_retrieve Data Exchange Sets state of ATB 'Auto Check Status On on, off on
Retrieve' toggle.
atb_auto_check_on_update Data Exchange Sets state of ATB 'Auto Check Status On on, off off
Update' toggle.
atb_ident_cadds_files Data Exchange Allows to identify CADDS files in the file yes, no no
open browser.

atb_prod_asm_upd_by_comp_ids Data Exchange Allows to update a Pro/DESKTOP yes, no yes
assembly based on assembly component
ids, if set to YES. Otherwise, the update
will be based on component names.
atb_search_path Without category Extends search path for ATB Update and
ATB Check Status commands.
atb_show_log Data Exchange Sets state of ATB 'Show Log' toggle. on, off on
attach_menumanager Without category Setup menu manager attachment to the yes, no no
main Pro/E window.
auto_ae_param_file User Interface Define path and file name of external file
used to define parameters that are
automatically created in all Annotation
Elements.
auto_assembly_with_layouts Assembly Yes - Enables automatic assembly. No - yes, no yes
Disables automatic assembly.
auto_associate_dimensions Data Exchange Yes - The drawing setup option no, yes no
associative_dimensioning is also set to
Yes. The system tries to associate
imported IGES dimensions (not yet
associative) with corresponding imported
geometry.
auto_backup_new_placemnt_refs Assembly Yes - Create Component Reference yes, no no
Backup, No - Do not Create Component
Reference Backup.
auto_constr_always_use_offset Assembly Control whether auto constraint should yes, no, never no
create offsets. Yes - Auto constraint alw
ays creates offsets. No - Auto constraint
snaps align or mate if surfaces are wi thin
tolerance. Never - Auto constraint never
create offsets.

auto_constr_offset_tolerance Drawing Sets the auto constraint tolerance for 0.5
creating offset dimensions. If distance is
less than this tolerance multiplied by
component size, offset is set as coincident.
Default value is 0.5 .
auto_convert_cables Electromechanical Yes - When regenerating a pre-Release yes, no yes
11.0 cabling assembly, the system
automatically creates a separate spool
feature for every individual wire or cable in
the assembly. No - An interface for the
cable conversion appears.
auto_evaluate_simprep_rules Assembly If the option is "yes" newly created rep no, yes no
would be updated each time on
retrieve/regeneration.
auto_include_annot_plane User Interface Control the default setting of the check box no, yes yes
in the Propagate annotation dialog box
which controls whether to pass all
annotations plane references.
auto_propagate_ae User Interface Yes - causes the automatic, local no, yes no
propagation of AE's after a supported
feature has been created.
auto_regen_views Drawing Yes - Automatically repaints the drawing yes, no yes
display when changing from one window
to another. No - Update to drawing views
will only occur when manual updates are
made via Repaint or View> Update.
auto_show_3d_detail_items Without category When set to yes, AEs parallel to the view yes, no yes
will be displayed while creating a new
view.
auto_traceback System When set to yes, traceback.log file will be yes, no no
generated when fatal error occurs.

auto_xml_on_retrieve Electromechanical Automatically load Cabling Logical yes, no no
Reference from an XML file when
retrieving the cabling assembly
auto_xml_on_save Electromechanical Automatically create an XML Logical yes, no no
Reference when saving a cabling
assembly
autobuildz_enabled Drawing Loads AutobuildZ application. yes, no no
autodrill_udf_dir Manufacturing Storage directory for holemaking MUDF's
that are used by Pro/NC Auto-drilling
functionality
autodrilling_config_filename Manufacturing Retrieve automatically and load the autodrilling
configuration file for the auto-drilling table.
autodrilling_holestyle_param Manufacturing Parameter name included in hole features
of a manufacturing reference model.The
parameter value identifies the MUDF for
holemaking that is automatically applied in
Pro/NC to drill these holes.
autohide_copied_group_af Features If set to yes, copying a feature group yes, no no
containing an Annotation feature will
automatically hide the Annotation Features
in the new group.
autoplace_single_comp Assembly Assembling components with an interface no, yes yes
will automatically place the component at
the first position satisfying the interface
definitions.
autoround_max_n_chains_per_feat Features Determines the maximum number of edge 20
chains that the Auto-Round algorithm will
attempt to round in each Auto-Round
member
autoroute_path_param_name Electromechanical Set the wire parameter to use to select a use_path
path during autorouting.
auxapp_popup_menu_info User Interface Enable display of popup menu info in the yes, no no
trail file.
bell Environment Yes - Turns on the keyboard bell that rings yes, no no
after each prompt. No - Turns off the
keyboard bell. To override this setting use
the Environment dialog box on the Tools
menu.
bitmap_size Data Management Works in conjunction with save_bitmap. 200
Determines the size (squared) of the
bitmap image that is stored.
blank_layer Layers Blanks specified layers when you begin a
Pro/ENGINEER session. The value is the
layer ID.
blended_transparency Model Display Yes - Transparent colors will appear using no, yes yes
alpha blending (if supported) when the
model is shaded.
bm_graph_tool User Interface BMX graph tool default, excel_linked, excel default
embedded
bmgr_pref_file User Interface Specifies the location of the Graph Tool
preference file.
bmx_param_restrictions Without category yes, no yes
boeing_extract_bundle Without category Setup whether the new extract bundle yes, no no
algorithm should be used.
bom_format Drawing Sets the BOM format file to be used for a
customized BOM.Specify name and path.
browser_favorite File Storage & Specifies the directories visible in the file
Retrieval browser for quick navigation.Use the full
path to avoid problems.
bump_revnum_on_retr_regen Assembly Determines whether or not revision yes, no yes
number is increased for generic models
that regenerate and change during
assembly retrieval.Only applies if
new_asm_regen_revnums is yes
(otherwise, there will be no revision
number bumping).
button_name_in_help User Interface Yes - The name and menu of any selected yes, no no
menu option displays, in English, in the
help text associated with that button.
c5_color_import Data Exchange Allows color import for Catia V5 interface. yes, no no
cable_int_portions_for_clr Electromechanical No - Global clearance checking for internal no, yes no
cable portions is excluded. Yes - Global
clearance checking for internal cable
portions is included.
cables_with_hlr Electromechanical Cables are not hidden behind objects. no, yes yes
cadam_line_weights Data Exchange Define the line width of entities within 0
Pro/ENGINEER to plot drawings with
correct line weights that are consistent
with a standard. The default
Pro/ENGINEER values for these weights
are: 2 (light), 3 (medium), 5 (heavy).
cadds_import_layer Data Exchange Allows import of CADDS5 layering. yes, no yes
campost_dir Manufacturing Specifies the CAM-Post load point
directory to enable you to directly set-up
the post-processors and generate MCD
files.
can_snap_to_missing_ref Assembly Controls whether to enable snapping to yes, no yes
missing references while dragging
components for placement. Yes -
Snapping is enabled while dragging. No -
Snapping is disabled while dragging.
capped_clip Model Display Yes - Displays the model as a solid when no, yes yes
shaded and clipped. No - Displays the
model as surfaces when shaded and
clipped.

catia_out_to_existing_model Data Exchange Append - If the selected CATIA model append, overwrite append
already exists, the new data is appended
to the existing CATIA file. Overwrite - If the
selected CATIA model already exists, the
newly exported file overwrites the existing
one.
centimeter_grid_interval Features Modify grid space in centimeter units for 0.1
handle movement.
cgm_use_pentable Data Exchange No - Do not use a defined pen table for no, yes no
formatting of CGM export.
chamfer_45deg_dim_text Drawing Controls the display of chamfer dimension asme/ansi, iso/din, jis asme/ansi
text without affecting the leader. This only
affects the text of newly created
dimensions. ASME/ANSI is the default.
check_same_assy_parts Assembly Determines whether to permit different yes, no yes
names for different part occurrences, or
not in mirror subassembly UI.
check_udf_int_key Without category Yes - updates UDF internal keys upon yes, no yes
group's retrieval. No - skips keys update.
chk_part_surfs_profpock Manufacturing Yes - Includes all reference part surfaces yes, no no
as check surfaces for profiling and
pocketing NC sequences.
cl_arrow_scale Manufacturing Enables you to control the size of the tool 1
path arrow for contouring NC sequences.
0 - The arrow does not display. Any other
value - The arrow scales accordingly.
cl_rotate_sign_convention Manufacturing TOOL or TABLE - defines ROTATE sign table, tool table
direction convention based with respect to
either rotation table or cutting tool.
clearance_triangulation Environment Specifies the quality of surface none, low, medium, high none
triangulation used to obtain initial guess
points for clearance and interference
calculations.

clip_always Model Display Yes - Display clipping after Visibilities no, yes yes
dialog box is closed.
clock Environment Yes - Displays the clock while yes, no no
Pro/ENGINEER is working.
clr_print_plus_minus Environment Sets the display of the system accuracy yes, no no
when calculating clearances between two
parts or surfaces. The default is to not
display the accuracy.
cmm_custom_tool_param_file Manufacturing Defines the file that contains the user-
defined tool parameters' list.
collect_dims_in_active_layer Without category This config options allows dimensions to yes, no yes
be collected on the active layer.
color Colors Turns the colors on or off. Turning colors no, yes yes
off displays the model wireframe in white.
color_ramp_size Colors Specifies the number of shades in a color -1
ramp. Applicable to multi-color, shaded
model displays of simulation / analysis
results. System graphics must support 256
colors and color maps that compress.
color_resolution Colors Specifies minimum allowable deviation 0.1
between user-defined colors. Colors
having RGB values within tolerance of
existing colors cannot be created.
Decreasing this setting allows more colors
that are very similar in RGB value to be
defined.
color_windows Colors All_windows - Wireframe colors display in all_windows, one_window all_windows
the main window and all auxiliary windows.
One_window - Colors display only in the
main window. Auxiliary windows display
wireframe in the default color.
combined_views_customization Without category Enable / Disable combined views yes, no yes
customization.

comp_angle_offset_eps Assembly Specifies the angle epsilon such that if the 10
desired surfaces are equal or greater than
the epsilon (in degrees), than an angle
offset constraint will be created.
comp_assemble_start Assembly Sets the initial assembly placement default, package,
behavior when assembling a new constrain_in_window,
component. Default - Default initial move_then_place
position.Package - Define initial position
using the Move
option.Constraint_in_Window - Use
secondary window. Move_then_Place -
Define initial position using the Move
option and thendefine placement
constraints.
comp_assemble_with_interface Without category Settings for assembling component with default_multi, default_single, default_multi
interface(s). from_list, none
comp_interface_placement Without category Sets the default interface placement type. interface_to_interface, interface_to_interface
Interface to geometry - place the interface_to_geom
component using component interfaces
and assembly geometry. Interface to
Interface - place the component using
assembly and component interfaces.
comp_rollback_on_redef Assembly No - Assembly is not rolled back when the yes, no yes
user redefines a component.
comp_snap_angle_tolerance Without category Specify the angle tolerance for snapping 30
while freeform dragging components.
Default value is 30.0 degrees.
comp_snap_dist_tolerance Without category Specify the distance tolerance for 0.1
snapping while freeform dragging
components.Default value is 0.1 (relative
to size of component being assembled).

company_name Environment Used with the export option
iges_out_mil_d_28000. To support MIL-D-
28000, your company name is required
input and the system prompts you every
time you export through IGES unless you
set the company name in your
configuration file.
compress_output_files File Storage & You can compress object files to store yes, no no
Retrieval them. Compressed files are generally
somewhat smaller than non-compressed
files (but may be larger in some cases).
Compressed files are slower to read and
write. Yes - Stores object files in
compressed format.
conf_mouse_anim Miscellaneous Display the presenter's mouse motions no, yes yes
when observing a shared Pro/ENGINEER
session.
contact_surfaces_gap Without category Sets the maximum allowable gap between 0
weld contact surfaces.
convert_to_wf3_replace Without category Convert to Wildfire3 replace functionality. yes, no no
copy_dxf_dim_pict Data Exchange YES - Imports each component of yes, no, as_symbol no
AutoCAD dimension separately. NO -
Imports AutoCAD dimensions as
dimensions in Pro/ENGINEER.
AS_SYMBOL - Imports AutoCAD
dimensions as symbols in Pro/ENGINEER.
copy_geom_update_pre_2000i_dep Assembly Yes - Flags independent copy geom no, yes
features in a pre-2000i model as modified
when retrieved into Pro/ENGINEER. Save
the model immediately to update the
model's copy geom dependency
information.
copy_geometry_method Assembly Sets the default copy geometry publish_geometry, references publish_geometry
reference(s) type

copy_set_datum_attr Features If set to yes, allow to copy set datum yes, no yes
associated with datum features..
cpus_to_use System Set up the number of threads including 2
main thread
create_drawing_dims_only Drawing Yes - Saves all new driven dimensions yes, no no
created in the drawing inside the drawing
as associative draft dimensions. No -
Saves driven dimensions created in
Drawing mode on solid geometry in the
solid.
create_fraction_dim Dimensions & Yes - All dimensions created will be yes, no no
Tolerances displayed as fractions.
create_numbered_layers Layers Yes - Creates default layers named 1 yes, no no
through 32.
create_temp_interfaces Assembly Allow the automatic creation of interfaces yes, no no
based on previous assembly instructions.
cri_grafting_enable Data Exchange Activates "Graft features" button under File yes, no no
menu. This allows user to graft features
created in CRI model to active model.
cti_class_color_file Electromechanical Sets the CTI class color file for CTI class
color displayduring electrical clearance
and creepage analysis.Use the full
pathname to avoid problems.
curr_proc_comp_def_color Assembly Process Specifies the default color used to display 0
the current component in a process
assembly.
curr_proc_comp_def_font Assembly Process Specifies the default font used on the
current component in a process assembly.

custom_rainbow Without category Used to specify fringe colors in Pro/FEM-
POST results. Specify blue, black, cyan,
magenta, green, yellow, red, and white.
Enter colors as a dash-delimited string
(lowest to highest value). The default is
blue-cyan-green-yellow-red-magenta-
white.
datum_point_symbol Model Display Specifies the shape of datum point dot, cross, circle, triangle, cross
symbols displayed in Part or Assembly square
mode.
dazix_default_placement_unit Data Exchange Specifies the units to be used for data micron, mm, thou
imported in Dazix files.
dazix_export_mounthole Data Exchange Yes - Causes the MOUNTHOLE section of yes, no no
a Dazix file to be processed as a mount
hole.No - Causes the MOUNTHOLE
section to be processed as a cut.
dazix_z_translation Data Exchange Yes - Passes the objects in the .edn files yes, no yes
through z translation.
def_layer Layers Specifies default layer names for different layer_3d_items,
types of items. The first value string is the layer_ae_driving_dim,
layer type. The second value string is the layer_all_detail_items,
layer name. layer_annotation_element,
layer_assem_member,
layer_assy_cut_feat,
layer_axis, layer_axis_ent,
layer_chamfer_feat,
layer_comp_design_model,
layer_comp_fixture,
layer_comp_workpiece,
layer_copy_geom_feat,
layer_corn_chamf_feat,
layer_cosm_round_feat,
layer_cosm_sketch,
layer_csys, layer_csys_ent,
layer_curve, layer_curve_ent,

layer_cut_feat, layer_datum,
layer_datum_plane,
layer_datum_point,
layer_detail_item,
layer_dgm_conn_comp,
layer_dgm_highway,
layer_dgm_rail,
layer_dgm_wire, layer_dim,
layer_draft_constr,
layer_draft_dim,
layer_draft_dtm,
layer_draft_entity,
layer_draft_feat,
layer_draft_geom,
layer_draft_grp,
layer_draft_hidden,
layer_draft_others,
layer_draft_refdim,
layer_draft_xsec,
layer_driven_dim,
layer_dwg_table,
layer_ext_copy_geom_feat,
layer_feature,
layer_geom_feat, layer_gtol,
layer_hole_feat,
layer_hole_thread,
layer_intchg_funct,
layer_intchg_simp,
layer_nogeom_feat,
layer_note,
layer_parameter_dim,
layer_part_refdim, layer_poin
default_abs_accuracy Environment Defines the default absolute part accuracy. 0
default_ang_dec_places Drawing Specifies the number of decimal places 1
shown in angular dimensions in a drawing.

default_ang_units Dimensions & Sets the display of newly created angular ang_deg, ang_min, ang_sec ang_deg
Tolerances dimensions to decimal degrees
(ang_deg),degrees and decimal minutes
(ang_min) or degrees, minutes and
decimal seconds (ang_sec) both in the
model and in the drawing. Does not affect
dimensions that already have been
created.
default_comp_geom_scope Without category Set the specified Shared Geometry all, pg, none all
reference control conditions to newly
added components.
default_comp_invalid_refs Without category Set the specified handling method of out- copy, prohibit copy
of-scope Accessible references to newly
added components.
default_comp_scope_setting Without category Set the specified Accessible reference all, none, subassemblies, all
control conditions to newly added skeleton_model
components.
default_comp_skel_geom_scope Without category Set the specified Shared Geometry all, pg, none all
added Skeleton components.
default_comp_skel_scope_setting Without category Set the specified Accessible reference all, none, subassemblies, all
control conditions to newly added Skeleton skeleton_model
components.
default_dec_places Dimensions & Sets the default number of decimal places 2
Tolerances (0-14) to display in all model modes for
non-angular dimensions. It does not affect
the display of dimensions modified using
Num Digits. In Sketcher,
sketcher_dec_places controls the number
of decimal places.
default_dep_copy_option Features Sets Full Dependent Copy as a default full_dep, dep_dim dep_dim
copy option.

default_dim_num_digits_changes Dimensions & Sets the default number of digits displayed yes, no yes
Tolerances in a dimension to the last entered value.
No - The system defaults to the value
specified for the configuration file option
default_dec_places.
default_draw_scale Drawing Sets the default drawing scale for views -1
added with the No Scale command. The
value must be greater than 0. No - The
system does not set a default drawing
scale.
default_ext_ref_scope Without category Set default scope for externally referenced all, none, subassemblies, all
models. All - Any model. None - Only skeleton_model
current model and children. Skeletons -
Any component in model's assembly and
higher skeletons on branch. Subassembly
- Only components and children in model's
assembly.
default_font User Interface Sets font for text other than menu bar,
menus and their children, and pop-up
menus and help. Add comma-delimited
variables in any order (italic bold, 24, times
or 24, times, italic bold have the same
effect). Any omitted variable uses standard
setting.
default_font_kerning_in_drawing Drawing Determines initial setting of Font kerning yes, no no
when 2D drawing annotations are created.
Yes - Font kerning is on for new 2D
annotations.
default_geom_analysis_type Without category Default save type for geometry analysis. quick, saved, feature quick
default_geom_scope Without category Default value for Geometry Scope allowed all, pg_if_exists, pg_only all
for referencing.
default_layer_model Layers Name of the model which is used to drive
rule-based layer placement of new items in
all models of the same type in session.

default_mold_base_vendor Casting & Mold Design Default Value for Mold Base vendor. futaba_mm, dme, hasco,
dme_mm, hasco_mm
default_obj_constraints_scope Without category Set the specified Shared Placement all, interfaces, none all
created models if template models were
not used.
default_object_geom_scope Without category Set the specified Shared Geometry all, pg, none all
created models if template models were
not used.
default_object_invalid_refs Without category Sets default condition for reference copy, prohibit copy
handling. Prohibit - System will abort all
attempts to create ext. reference that
violates scope. Copy - System will issue
warning upon all attempts to create ext.
reference that violates scope.
default_object_scope_setting Without category Set default condition for reference control. all, none, subassemblies, all
All - Any model. None - Only current model skeleton_model
and children. Skeletons - Any component
in model's assembly ang higher skeletons
on branch. Subassembly - Only
components and children in model's
assembly.
default_placement_scope Without category Default value for Component Placement all, intrf_if_exists, intrf_only all
Reference filter.
default_placement_surfacefinish Dimensions & Sets the default placement type for with_leaders, on_entity, normal_to_entity
Tolerances surface finishes within the surface finish normal_to_entity, free
UI.
default_ramp_size Model Display Specifies a number of shades of gray to
show shading of non-colored objects.

default_scene_filename Photorender Complete path to the scene file to be used /devsrc1/spg/system_1
as default scene file. /graphic-
library/scenes//default-
enhanced-realism.scn
default_shrink_formula Casting & Mold Design Default option of shrinkage formula: 1/(1- asme, simple simple
S) - ASME standard or 1+S (simple).
delete_after_plotting Printing & Plotting Yes - A plot file is automatically deleted yes, no
from the directory in which it resides when
it has been successfully plotted.
depthcue_always Model Display Depth cue aids in visualizing a wireframe no, yes yes
model. With depth cue enabled, wireframe
lines become darker as they extend into
the screen and lighter as they extend
towards the screen. Depth cue is
supported only by the appropriate graphics
hardware.
depthcue_value Model Display Aids in visualizing a wireframe model. With
depth cue enabled, this option specifies
the default percentage of depthcue used.
Depth cue is supported only by the
appropriate graphics hardware.
diagram_export_allow Electromechanical YES: Allow user to save a copy of loaded no, yes no
diagrams as DGE file for loading into
Routed Systems Designer, NO: Do not
provide option to save a diagram as DGE.
diagram_pin_edit_multi_line Electromechanical (Diagram) Determines the Pro/TABLE yes, no no
format used when you are modifying pin
parameters. "yes" - You can add user-
defined pin parameters by including them
between the DEFINE and ENDDEF
statements for each pin. "no" - The system
uses columnar format

dialog_translation User Interface Specifies the language in which the dialog yes, no yes
display when running non-English version
of Pro/ENGINEER.
dim_fraction_denominator Dimensions & Sets the largest denominator to be used 32
Tolerances for fractional dimensions. If the fraction
can be reduced, then it converts to the
lowest possible denominator (for example,
4/32 converts to 1/8).
dim_fraction_format Dimensions & Std - Displays fractional dimensions in the std, aisc std
Tolerances standard Pro/ENGINEER format. Aisc -
Displays fractional dimensions in the
American Institute of Steel Construction
(AISC) format and displays architectural
units in AISC format for feet-inches.
dim_inactive_components Assembly Display inactive assembly components always, never, shaded_only shaded_only
with stippled transparency and default
color (grey). Default value is shade_only.
dim_offscreen_limit Dimensions & If more than zero, sets the margin beyond 0.2
Tolerances which dimensions are automatically
snapped back onto the screen.For
example, a value of .2 lets a dimension be
20% of the window size outside the
window.If set to zero, disables snapping of
offscreen dimensions.
din_std_line_priority Printing & Plotting If set to YES line priority in plotting or yes, no no
export is determined according to DIN
standard.
dir_cache_max File Storage & Specify the maximum number of 256
Retrieval directories to cache.Larger values can
speed up file access, but use more
memory.
direct_vrml Data Exchange Yes - Enables direct VRML conversion. yes, no no

disable_search_path_check File Storage & Controls whether the search path is yes, no no
Retrieval checked for name conflicts when creating,
renaming, or copying models. Name
conflicts should be avoided because
different models with the same name
cannot be together in session.
disp_in_open_rep_create Without category Simplified Rep to display initially in Open yes, default rep, no no
Rep Create: "No" for none, "Yes" for
graphics rep, or "Default Rep" to display
the rep indicated by option
"open_simplified_rep_by_default".
disp_trimetric_dwg_mode_view Drawing Displays the model in default orientation yes, no yes
when placing a general view on the
drawing. No - Model does not appear until
Default is chosen from the Orientation
dialog box.
display Model Display Wireframe - All solid edges in white. wireframe, hiddenvis, shade
Hiddenvis - Hidden lines in grey. hiddeninvis, shade
Hiddeninvis - Hidden lines removed.
Shade - Display shaded surfaces. Settings
are reflected in printing and some export
modes.
display_annotations Environment Determines whether or not annotations are yes, no yes
displayed in 3D models.
display_axes Model Display Displays or hides datum axes. yes, no yes
display_axis_tags Model Display Displays or hides datum axis name tags. yes, no yes
display_comps_to_assemble Assembly Process Yes - The design model goes into memory yes, no yes
and displays. Pick process components
from the design model or the Model Tree.
No - Only the Model Tree displays. As you
pick process components from the Model
Tree, they go into memory.

display_coord_sys Model Display Yes - Coordinate systems will be yes, no yes
displayed. No - Coordinate systems will
not be displayed.
display_coord_sys_tags Model Display Yes - Coordinate system name tags will be yes, no yes
displayed. No - Coordinate system name
tags will not be displayed.
display_dwg_sketch_constraint Drawing When set to yes, parametric sketching yes, no no
constraints, such as V for vertical, are
displayed when a drawing object is
selected
display_dwg_tol_tags Drawing Sets the display of the tolerance tags that yes, no yes
appear in drawings. This option does not
affect the display of tolerances on
dimensions.
display_florin Model Display Yes: display of the florin (international no, yes no
currency symbol) where possible. No: use
the euro symbol exclusively.
display_full_object_path Environment Controls the display of the object's full file no, yes no
name (including its object-type suffix and
its version number) and file path in the
window title and Model Info display. Yes -
Displays full file name and file path. No -
Displays object name only.
display_in_adding_view Drawing Controls model display in a drawing when wireframe, wireframe
auto_regen_views is No. Wireframe - Adds minimal_wireframe, default
new views in wireframe, displays datums.
Minimal_wireframe - Displays in
wireframe, no datums, axes, or silhouette
edges. Default - Displays using the
Environment setting.

display_internal_cable_portion Electromechanical Yes - Internal cable portions will be yes, no no
displayed for any wires that have been
manually set to Yes in the Cable Paths
Setup dialog box for each individual splice
and custom component. This option can
be overridden in the Environment dialog
box.
display_layer Layers This causes the specified layers to display
when you begin a Pro/ENGINEER
session. The variable "value" is the layer
Id.
display_plane_tags Model Display Yes - Datum plane name tags will be yes, no yes
displayed. No - Datum plane name tags
will not be displayed.
display_planes Model Display Yes - Datum planes will be displayed. No - yes, no yes
Datum planes will not be displayed.
display_point_tags Model Display Yes - Datum point tags will be displayed. yes, no yes
No - Datum point tags will not be
displayed.
display_points Model Display Yes - Datum points and their names will be yes, no yes
displayed. No - Datum points and their
names will not be displayed.
display_silhouette_edges Model Display Sets the display of silhouette edges for no, yes yes
wireframe display only.
display_thick_cables Electromechanical Yes - Display cables and wires with yes no
thickness. No - Display the centerline of
cables and wires only. This option can be
overridden in the Environment dialog box.
display_thick_insulation Piping Yes - Display insulation in thick mode. No - yes, no yes
Display insulation in centerline mode. This
option can be overridden by the Thick
insulation option in the Model Display
dialog box.

display_thick_pipes Piping Yes - Display pipes in thick mode. No - yes, no no
Display pipes in centerline mode. This
option can be overridden by the Thick
pipes option in the Model Display dialog
box.
display_tol_by_1000 Dimensions & If set to Yes, tolerances for non-angular yes, no no
Tolerances dimensions will be displayed multiplied by
1000.
display_z_extension_lines Model Display Controls the display of dimension z- yes, no yes
extension lines. Yes - z-extension lines will
be displayed; No - z-extension lines will
not be displayed.
dm_adv_import_file_types Without category
dm_adv_import_system_params Without category
dm_auto_open_zip Data Management YES - Windchill CAD packages or zip files yes, no yes
will open automatically. NO - User selects
which file in contents to open.
dm_cache_limit Data Management Enter amount of disk space (in megabytes)
to allocate for local file storage. The
change to the existing setting will take
effect after Pro/ENGINEER is restarted
dm_cache_mode Data Management Indicate which objects will be written to none, modified, all all
local cache when objects in Pro/E memory
are saved.
dm_checkout_on_the_fly Data Management Controls the default action presented to checkout, continue checkout
the user when Check Out on the fly dialog
comes up
dm_enable_import_export_ui Without category yes, no no
dm_enable_simple_import_export Without category yes, no yes
dm_http_compression_level Data Management Set the data compression factor (0-9, 0=
no compression) for data exchange with a
Windchill server.

dm_overwrite_contents_on_update Data Management Yes: Windchill Workspace Update will yes, no no
overwrite locally/modified out of date
objects with the ones in the server. No
(Default): Windchill Workspace Update will
update metadata only.
dm_remember_server Data Management Primary server/workspace must be set by no, yes yes
user for each Pro/E session.
dm_save_as_attachment Data Management Controls the default option for Save A yes, no
Copy when models are saved as in non-
Pro/E format. Yes - It will by default save it
as secondary content attachment to the
original CAD Document. No- It will by
default save it as Primary CAD Document
dm_search_primary_server Data Management Search the primary server for yes, no yes
dependencies not found in the workspace.
dm_secondary_upload Data Management Indicate when modified Pro/E objects on a automatic, explicit automatic
secondary server will be moved from the
local cache to the user's workspace on the
server.
dm_synchronize_in_background Data Management Yes: Enables workspace synchronization yes, no no
in the background. No (Default):
Workspace synchronization will happen in
the foreground.
dm_upload_objects Data Management Indicate when modified Pro/E objects will automatic, explicit explicit
be moved from the local cache to the user
workspace on the server.
dont_show_symbol_nodes Design Manager Do not show references derived from yes, no no
relations in Parent/Child viewer.

draw_models_read_only Drawing Yes - Drawing model files are read- yes, no, cosmetic_only no
only.No model changes can be
made.Cosmetic_only - Only cosmetic
changes can be made to the
model.Design changes are not
allowed.Cosmetic changes include adding
driven dimensions, cross sections, and
explode states.
draw_points_in_model_units Drawing Defines the current draft view's coordinate yes, no no
values as model units rather than drawing
units. The GET POINT menu uses the
scale of the draft view and the draft view's
model units for relative and absolute
coordinate entry and display in the
Message Window.
drawing_ole_image_dpi Drawing Resolution of OLE object images. The 150
range of valid values is 0 to 600 dots per
inch.
drawing_setup_file Drawing Sets the default drawing setup file option /devsrc1/spg/system_1
values for your Pro/ENGINEER session, /text/prodetail.dtl
otherwise, the system uses the default
drawing setup file option values. Certain
parameters in the file are valid only if you
have a license for Pro/DETAIL.
drawing_shaded_view_dpi Drawing Resolution of exported shaded drawing 150
views.The range of valid values is 0 to 600
dots per inch.
drawing_view_origin_csys Drawing The named coordinate system will be used none
as the origin of a newly created view or of
a modified view.None - The system will not
use a previously specified coordinate
system.

drm_policy_server User Interface Allows a user to preset the server policy
that is to be used when Apply Policy
command is utilized.
dwg_export_format Data Exchange Provides the ability to choose DWG file 14, 2000, 2004, 2007 2007
version when exporting from Pro/E
drawing.
dwg_unicode_conversion_language Drawing Defines the language used during Unicode file, session, usascii, english, file
conversion of pre-Wildfire 4.0 drawings. japanese, french, german,
This option does not affect the conversion russian, italian, spanish,
of models. File uses the language stored korean, chinese_tw,
in the drawing header file; Session uses chinese_cn, hebrew, greek,
the language of the current Pro/E session. turkish, czech, polish,
hungarian, slovenian,
portuguese, slovak
dxf_block_to_pro_symbol Data Exchange Specifies whether or not DXF BLOCKS to yes, no no
be imported as Pro/E symbols. Yes -
Imports BLOCKS as symbol definitions,
No - Imports BLOCKS as separate
entities.
dxf_export_format Data Exchange Provides the ability to choose DXF file 12, 13, 14, 2000, 2004, 2007 2007
version when exporting from Pro/E
drawing.
dxf_in_faceted_brep Data Exchange Default, faceted boundary representation yes, no yes
is allowed in import.
dxf_in_proxy_entity Data Exchange Controls the input support for no, yes yes
ACAD_PROXY_ENTITY.
dxf_out_comments Data Exchange YES - comments (999 group codes) will be yes, no yes
created in DXF file exported from
Pro/ENGINEER. NO - DXF file will be
created without comment lines.

dxf_out_drawing_scale Data Exchange Specify whether or not to export drawing yes, no no
scale to the DXF or DWG file. Yes -
Includes a scale factor DIMLFAC in the
exported DXF/DWG. No - Exports without
using a scale for the drawing. Set to Yes
when exporting to read into AutoCAD.
dxf_out_scale_views Data Exchange Specify whether or not to scale drawing yes, no no
views when exporting to theDXF or DWG
file.Yes - rescales the entire drawing in
such a way that the main viewscale
becomes 1:1. No - exports without
rescaling.
dxf_out_sep_dim_w_breaks Data Exchange YES - Breaks dimensions with breaks on yes, no no
witness lines to separate entities and
preserves the original picture. No - Exports
such dimensions as DXF DIMENSION
entities and removes the breaks on
witness lines.
dxfio_in_sjis Data Exchange Determines if the SJIS is supported when yes, no no
importing/exporting DXF files in Japanese
ecad_area_default_import Data Exchange Defines how imported ECAD areas are 3d_volume, cosm_area cosm_area
treated. Cosm_area - Treats imported
ECAD areas as cosmetic area features.
3d_volume - Imports ECAD areas with Z-
heights as a 3D enclosed quilt.
ecad_board_csys_def_name Data Exchange Specifies the default coordinate system
name added to an ECAD board being
imported. If you do not set this variable,
the system prompts you for a name.
ecad_comp_csys_def_name Data Exchange Specifies the default coordinate system

name added to an ECAD component
being imported. If you do not set this
variable, the system prompts you for a
name.

ecad_comp_layer_map Data Exchange Allow layer mapping for ECAD yes, no yes
component's import into Assembly.
ecad_comp_xsec_def_name Data Exchange Will allow pre-setting default X-section to
be used for component outline output to
*.eda format.
ecad_create_hint_add Data Exchange Assists in creation of an ecad_hint.map no, yes yes
file. Yes - Automatically renames
components, if necessary, each time
library of component outlines is imported
to Pro/ENGINEER. This does not create
an ecad_hint.map file. It controls if
ecad_hint.add is created.
ecad_default_comp_height Data Exchange Sets default value and units for an ECAD -1
component being imported. Units can be:
inch, mil (1E-3 inches), thou (1E-6 inches),
cm, mm, micron (1E-6 meters), dsu (1E-8
meters). If not set, the system uses the
current component's units.
ecad_default_comp_place_status Data Exchange Sets default component placement status unplaced, fixed, placed, placed
for export (parameter setting will override mcad, ecad
the default).
ecad_exp_both_two_areas Data Exchange Supports the export of ECAD areas with yes, no no
different "Above Board" and "Below Board"
conditions."yes" - Enables you to export
both sided keep-in/keep-out ECAD areas
as two individual areas (top and bottom).
ecad_export_cuts_as_holes Data Exchange Exports Pro/ENGINEER cuts as holes to yes, no yes
ECAD systems.
ecad_export_holes_as_cuts Data Exchange Exports Pro/ENGINEER holes as cuts to yes, no no
ECAD systems.

ecad_import_holes_as_features Data Exchange Import sections specified as yes, no yes
DRILLED_HOLE as through-all holes.
Boards created with Pro/ENGINEER
drilled holes export with default value of
NPTH for the ECAD_HOLE_TYPE
parameter. Create this feature parameter if
a value of PTH is needed (IDF 2.0/3.0).
ecad_import_relative_accuracy Data Exchange Defines the relative accuracy used in 0.0012
ECAD import.
ecad_load_filtered_holes_to_ui Without category Controls whether "ECAD import holes yes, no no
configs" (ecad_pin_hole_import &
ecad_via_hole_import) will remove holes
completely from the import (default) or just
pre-set the holes filter UI condition.
ecad_mapping_file Data Exchange Specify the ecad_hint.map file that will be
used for ECAD operations.
ecad_missing_component_status Data Exchange Setup default status for missing keep_missing, keep_missing
components in "Investigate Placement" delete_missing
Dialog.
ecad_mtg_hole_import Data Exchange Setup the default for the import of ECAD yes, no, as lightweight yes
Holes type MTG (IDF 3.0 or IDX ONLY)
ecad_other_outl_csys_def_name Data Exchange Specifies the default coordinate system
name for the .OTHER_OUTLINE section
of an IDF 2.0 ECAD component being
the system uses ECAD DEFAULT as
coordinate system name.
ecad_outline_holes_exp_method Without category Select how holes that are placed on the default, arcs default
board outline be exported.
ecad_panel_csys_def_name Data Exchange Specifies the default coordinate system
name added to an ECAD panel being
the system prompts you for a name.

ecad_pin_hole_import Data Exchange Setup the default for the import of ECAD yes, no, as lightweight no
Holes from type PIN (IDF 3.0 or IDX
ONLY)
ecad_tool_hole_import Data Exchange Setup the default for the import of ECAD yes, no, as lightweight yes
Holes type TOOL (IDF 3.0 or IDX ONLY)
ecad_via_hole_import Data Exchange Setup the default for the import of ECAD yes, no, as lightweight yes
Holes from type VIA (IDF 3.0 or IDX
ONLY)
edge_display_quality Model Display Controls display quality of an edge for normal, high, very_high, low normal
wireframe and hidden-line removal.
Normal - Normal quality of edge display.
High - Increases tessellation by 2.
Very_high - Increases tessellation by 3.
Low - Decreases tessellation from normal,
speeds up display.
enable_3dmodelspace_browser_tab Without category Yes - Display 3DModelSpace tab in the yes, no yes
browser when Pro/E starts. No - Display
3DModelSpace tab only when user click a
3DModelSpece link in the navigator
enable_absolute_accuracy Environment Controls display of the ACCURACY menu. yes, no no
Yes - ACCURACY menu always appears
when you choose Accuracy from the
PART SETUP menu. No - The menu
appears only if the part is currently defined
with absolute accuracy.
enable_acis_export_extension Data Exchange Enable ACIS export extension. yes, no no
enable_advance_collision Assembly Enables advance collision settings usage. yes, no no
enable_assembly_accuracy Assembly No - Disables accuracy modification for yes, no yes
assembly objects.
enable_cadra_export Data Exchange Enables the CADRA command in the no, yes no
EXPORT menu. This enables the creation
of a CADRA specific IGES file.

enable_face_preselection Without category Controls the ability to "pre-select" yes, no yes
faces/datums as an entry to Sketch based
features such as Extrude, Revolve (input
to the internal sketch).
enable_hlr_hashing Model Display Enables hlr hashing no, yes no
enable_implied_joints Assembly Allow underconstrained components as yes, no yes
mechanism connections.
enable_offset_fan_curve Without category Enables fan curve option for offset tool. yes, no no
enable_popup_help User Interface Controls pop-up help in dialog boxes. Yes yes, no yes
- Help enabled. No - Help disabled.
enable_protk_xml_schema Application Enables XML-Schema validation for yes, no no
Programming Pro/TK feature XMLs
Interfaces
enable_shaded_view_in_drawings Drawing Yes - shading display is allowed in yes, no yes
drawing views. No - shading display will be
shown in wireframe.
enable_tree_indep System Setup whether tree customization will yes, no no
allow separating the tree window from
Pro/E window.
erv_show_external_only Assembly Yes - Global Reference Viewer will show yes, no no
objects with external references only;No -
all the objects will be visible
excel_analysis_directory File Storage & Sets the default directory for the MS Excel
Retrieval files to be used for Excel analysis
calculations. Use the full pathname to
avoid problems.
excel_family_table_keep_file File Storage & Yes - in case of editing family table with yes, no no
Retrieval excel, if saved excel file exist , will always
update it.
exec_prog_on_assem_retr File Storage & Execute pro/program for models during yes, no no
Retrieval assembly retrieval.

expand_all_with_nested_layers Without category Yes - expand all including nested sub yes, no yes
layers.
explode_animation_max_time Model Display Sets the maximum amount of time an 1
animation between explode states will
take.
explode_iges_dimension_note Data Exchange Controls how dimensions are treated when yes, no no
importing an IGES drawing file. Yes - Each
IGES dimension explodes into an
independent note with the dimension text
and a dimension with an empty note. No -
Dimensions are treated as before.
export_3d_force_default_naming Data Exchange Specify whether the Pro/ENGINEER yes, no no
model names should be used for STEP
export. Yes - Use default naming. No -
Add suffixes to model file names.
export_report_format System Controls the format of the exported reports comma_delimited, rich_text comma_delimited
displayed in the embedded browser. Rich
Text - Exports the report in Rich Text
format, Comma Delimited - Exports the
report in Comma Delimited format.
export_to_shipit Data Exchange Enable Ship-it interface export. yes, no no
extend_cvpath Data Exchange Extends CVPATH search path for
CADDS5 data exchanging.
external_analysis_directory File Storage & Sets the default directory for the files to be
Retrieval used by External Analysis calculations.Use
the full pathname to avoid problems.
fail_ref_copy_when_missing_orig Assembly Yes - When using a copied geom feature yes, no yes
or a backed-up external reference with the
Design Manager, and the reference is
missing in the original, then the copied
geom feature fails. No - The feature
freezes and does not update.

fail_unattached_feature Features Handles unattached protrusion and cuts, yes, no no
when retrieving pre-Release 15 models.
Yes - When a part is retrieved, the system
fails an unattached protrusion or cut. No -
When a part is retrieved, the system does
not fail an unattached protrusion or cut.
fan_significant_locations_only Electromechanical Setup whether only significant locations yes, no yes
should be flattened on flattening a
harness.
fan_with_network Electromechanical Setup whether the network should be yes, no yes
included on flattening a harness.
fast_highlight Model Display Yes - Use simplified highlighting which no, yes yes
redisplays more quickly at the expense of
certain details.This option may increase
memory usage slightly.
fasthlr Model Display Specifies whether fast hidden line removal no, yes no
is on/off by default.
feature_create_auto_begin Features In feature creation, determines whether or yes, no no
not the Define button is automatically
activated when you open the dialog box.
Yes - Button is activated automatically. No
- You select the button.
feature_create_auto_ok Features In feature creation, determines whether or yes, no no
not the system activates the dialog box OK
button automatically when the last
required element is defined. Yes - Button
is activated automatically. No - You select
the button.
fem_allow_named_mesh_files Without category Yes - The user will be prompted to select a yes, no no
file to retrieve the mesh from, or enter a
file name to save the mesh to. No - The
user will not be prompted to select or enter
a mesh file name.

fem_ansys_annotations Without category Toggles transfer of loadcase names to yes, no no
ANSYS.
fem_ansys_grouping Without category Toggles transfer of groups/layers to yes, no no
ANSYS.
fem_asp_ratio Without category The value that FEM created elements of 7
aspect ratio are compared against.
fem_default_solver Without category Specifies default solver. ansys, nastran
fem_dist_index Without category The value that FEM created elements of 0.4
distortion indices are compared against.
fem_edge_angle Without category Sets the minimum acceptable default 30

angle between adjacent element edges.
Enter value between 0 and 90.
fem_keep_solver_files Without category Yes - All Solver files will be retained after yes, no no
running the analysis. No - All Solver files
will be deleted after running the analysis.
fem_mesh_operations Without category Yes - The menu item Operations appears yes, no no
in the FEM MESH menu, providing access
to functionalities to manipulate the finite
element mesh. No - the menu FEM MESH
will not have the item Operations.
fem_mesh_preserve Without category Yes - The finite element mesh will be yes, no no
automatically stored in the mesh file upon
creation, and retrieved on entering the
Structure/Thermal. No - The mesh will not
be stored or retrieved automatically.
fem_mid_ratio Without category The value that FEM created elements of 0.1
mid ratios are compared against.
fem_neutral_version Without category Specifies version number of neutral file. 3
fem_shell_elem_type Without category Sets the default shell element type in FEM tri, quad quad
mode.

fem_skew_angle Without category Sets the maximum acceptable default 45
skew angle value, measured in degrees.
Enter a value between 0 and 90.
fem_solver_time_limit Without category For NASTRAN solution, uses this option to 60
interrupt the solver after the specified time
limit. The default value is 60 minutes.
fem_taper Without category Sets the minimum acceptable default taper 0.5
value. Enter a value between 0 and 1.
fem_warp_angle Without category Sets the maximum acceptable default 10
warp angle value, measured in degrees.
Enter a value between 0 and 90.
fem_which_ansys_solver Without category Specifies the ANSYS equation solver type frontal, iterative, powersolver,
to be used. Supported solver types: iccg, auto, sparse
FRONTAL, ITERATIVE (JCG),
POWERSOLVER (PCG), ICCG, AUTO,
and SPARSE.
fem_y_dir_compress Without category Specifies the Y-direction based on yes, no no
compressed and uncompressed geometry.
The default value is uncompressed.
file_open_default_folder File Storage & Sets default dir for File>Open. default, working_directory,
Retrieval Working_directory - Search working in_session, pro_library
directory. In_session - Search objects
insession. Pro_library - Use only if
Pro/LIBRARY is installed. Workspace -
Use only with
Pro/INTRALINK.Commonspace - Use only
with Pro/INTRALINK.
file_open_default_view File Storage & Specify the initial view for file dialogs: list, details list
Retrieval "LIST" or "DETAILS".
file_open_preview_default File Storage & Controls whether the preview area is expanded, collapsed collapsed
Retrieval expanded by default when the file open
dialog or local file browser is displayed.

file_timestamp_format Without category Controls the format of time stamps in file %dd-%mmm-%yy
dialogs and the folder browser. The format
for the setting is a string consisting of up to
seven portions: the year, the month, and
the date, the hours, minutes, seconds and
am/pm designator. You can enter the
portions in any order.
fix_autocad_iges_text_scale Data Exchange Fixes scaling problems with AutoCAD yes, no no
releases earlier than Release 10. Yes -
Repairs AutoCAD files appropriately.
fix_catia_iges_sym_note Data Exchange Corrects a problem caused by multiple yes, no no
rotations of a note in a CATIA IGES file.
Yes - Rectifies any discrepancies.
fix_imported_set_view_orient Data Exchange Sets viewing characteristics for imported yes, no no

CATIA SET files. Yes - Files can have
translated views. No - Files cannot have
translated views.
fix_refs_to_intersections Assembly Sets remnant removal ability for the yes, no no
ReIntersect command in the ASSY FEAT
menu. Yes - You can remove remnants.
No - You cannot remove remnants.
flip_arrow_scale Environment Sets a scale factor for enlarging the size of 1
the flip arrow that appears for feature
creation direction (default = 1).
floating_layer_tree Layers Set to yes if user wants to see a layer tree yes, no no
dialog separated from navigator.
fonts_size User Interface Determines the relative size of the text in small, medium, large
menus and dialog boxes. You must restart
Pro/ENGINEER for the change to take
effect.
foot_grid_interval Features Modify grid space in foot units for handle 0.083333
movement.

force_new_file_options_dialog File Storage & Force the use of the New File Options yes, no no
Retrieval dialog.
force_upd_assem_mp_in_simp_rep Assembly Update mass properties parameters even yes, no no
when some of the components of the
assembly are not in master rep.
force_wireframe_in_drawings Drawing Yes - Displays all views of drawings in yes, no no
wireframe. No - Displays views according
to the display set for the session
(wireframe, hidden, and so on).
format_setup_file Drawing Assigns a specified setup file to each dwgform.dtl
drawing format. To assign the drawing's
parameter values to the format, you must
retrieve the drawing's setup file into the
format.
frames_per_sec Model Display Determines whether view is animated. no, yes no
frames_per_sec_value Model Display Used to set the smoothness of view 3
animation changes. Higher numbers
provide more frames/sec, and giving you a
smoother animation. Lower numbers
cause the view to change more quickly.
freeze_failed_assy_comp Assembly No - Requires an action to fix the yes, no no
assembly or freeze the component that
fails retrieval. Yes - Freezes any
component failing retrieval at its last
known assembly location. Missing refs
using offsets or internal datums do not
cause components to freeze.
freeze_failed_cable_locations Electromechanical Suspends the cable location at its last yes, no no
known assembly location.
frt_enabled Without category Loads feature recognition application. yes, no no

full_hlr_for_cables Electromechanical Full - Removes hidden lines from view none, full, partial full
when cables hide other geometry (use
when Hidden Line active). Partial - Cables
hide other non-interfering cables except
when cables route together between same
locations. None - Display hidden lines
(faster).
general_undo_stack_limit System Setup the default number of entries in the 50
top level Undo/Redo (default = 50).
generate_viewable_on_save File Storage & Controls whether updated ProductView yes, no no
Retrieval .edz files are automatically exported every
time a model is saved.
geometry_analysis_color_scheme File Storage & Specifies the location of the geometry
Retrieval analysis color scheme file.
gerber_360_interpolation Printing & Plotting Yes - Arcs and circles included in no, yes no
outputted Gerber plot files will take this
format.
global_appearance_file Colors Material Global Appearance file path.
gpostpp_dir Manufacturing Specifies the directory containing the post
processor files to be used by Pro/NCPOST
(GPOST).
graphics System Sets the optional graphics environment opengl opengl
used by certain platforms for running x_windows
Pro/ENGINEER. Refer to the Installation starbase
Guide for a list of defaults and optional xgl
graphics. win32_gdi
grid_snap Sketcher Yes - Makes pick points snap to a grid. No yes, no no
- Turns the grid snap off so that any
location can be picked.

group_repl_with_recycle Without category Yes - enables new UDF replacement with yes, no yes
family table instances that prevents
children failures. No - UDF replacement
will work in the same manner as Wildfire
3.0 and earlier releases.
group_replace_rename Without category Yes - updates replaced group name with yes, no yes
replacement group name. No - preserves
existing name of the group being replaced
if it is a user-given name.
gtol_dim_placement Dimensions & Controls display of geometric tolerances in on_bottom, under_value on_bottom
Tolerances Part. Use like drawing set-up option of the
same name. On_bottom - Gtols display at
bottom (below additional lines of text).
Under_value - Gtols display under
dimension value (above additional lines of
text).
harn_start_model_dir Electromechanical Provides the complete path to the
directory containing harness start parts
and assemblies
harn_tang_line_display Electromechanical Display the tangency lines between cable yes, no yes
segments in thick cable display mode.
help_center_path User Interface URL of an active Pro/ENGINEER Help
Center, if the Help Center is not installed
at the default path (along with Pro/E
product), of nature
http://localhost:/index.jspx. Or, URL of the
Pro/ENGINEER Help Center, that is
deployed on a web server.
help_translation User Interface Specifies the language in which the short yes, no yes
help messages display when running non-
English versions of Pro/ENGINEER. Yes -
Display in native language. No - Display in
English.

highlight_erased_dwg_views Drawing Controls the display of erased view yes, no yes
outlines (environment option Highlight
Erased Views). Yes - Highlights erased
views. No - Turns off highlighting for
erased views.
highlight_geometry Environment Yes - Items selected in the model tree are yes, no yes
highlighted in the geometry area.
highlight_layer_items Layers Yes - Items selected in the layer tree are yes, no yes
highlighted in the geometry area.
highlight_new_dims Drawing In drawing mode, highlights new yes, no no
dimensions in red until you repaint the
screen.
hlr_for_quilts Drawing In Drawing, controls quilt display in hidden yes, no no
line removal. Yes - Includes quilts in the
hidden line removal process (preselects
Qlt HLR in the VIEW DISP menu). Default
in the VIEW DISP menu, uses the value
you have set.
hlr_for_xhatches Electromechanical Controls whether HLR to be enabled for no, yes yes
crosshatches in drawing mode.
hole_diameter_override Features No- Uses hole-table-driven standard hole yes, no no
diameter value. Yes - Allows specifying the
drilled hole value instead of the standard
value.
hole_file_resolution Features Specify Hole tool to use external hole replace_with_external, replace_with_external
parameter (.hol) files. use_internal
hole_parameter_file_path Features Specifies the directory path for a standard
screw-size parameters (.hol) file to be
loaded from disk. Use the full path name
to avoid problems.

iconify_entire_pro User Interface Determines how many other no, yes yes
Pro/ENGINEER windows/menus are
iconified when one window is iconified.
Yes - All the windows and menus are
iconified. No - Only the selected window is
iconified.
idd_repair_tangency Without category yes, no no
iges_clip_view_ent Data Exchange Determines whether IGES entities are yes, no yes
clipped with regards to IGES views. YES -
Entities outside the view outline are
clipped. NO - No clipping.
iges_clip_view_note Data Exchange Determines how IGES notes are clipped no_clip, full_clip, partial_clip no_clip
with regards to IGES views. No_clip - No
clipping. Full_clip - Notes that are partially
outside the view outline are clipped.
Partial_clip - Notes completely outside the
view outline are clipped.
iges_export_dwg_views Data Exchange Yes - Exports drawing view information. yes, no no
No - Does not export drawing view
information.
iges_in_assoc_dim_geom_21 Data Exchange Controls if imported IGES associative yes, no no
dimensions remain associative. Yes - If the
drawing setup option
associative_dimensioning is Yes, then the
Associativity Instance entity is processed
during import. No - Dimensions do not
retain associativity.
iges_in_dwg_color Data Exchange Yes - Import RGB information to IGES yes, no no
files. The color definition entities in the
IGES file are imported to the drawings as
user-defined colors. No - The color-
definition entities in the IGES files are
ignored when importing to the drawing.

iges_in_dwg_line_font Data Exchange Controls the import of user-defined line yes, no no
fonts. Yes - Give default names to user-
defined line styles without names in order
("IGES_1," "IGES_2" etc.). No - Imports
the user-defined line fonts as Solid line
font.
iges_in_group_to_dwg_layer Data Exchange Yes - Converts an IGES group to drawing no, yes no
layers. No - The IGES group is not
converted.
iges_note_disp Data Exchange Determines what to do when IGES note as_geometry, all_views, all_views
entities do not point to any views or the no_views, as_is
drawing entity. See the configuration
option iges_zero_view_disp.
iges_out_all_srfs_as Data Exchange Default - Outputs all surfaces as 128, 114, default default
appropriate IGES surfaces. 114 - This
option applies only to representations of
surface shape. Trimmed surface entities
(type 144) are exported regardless of
setting. 128 - Outputs all surfaces as IGES
B-spline surfaces.
iges_out_assembly_default_mode Data Exchange Set default for assembly export via IGES. flat flat
Flat - Single level model. One_level - Assy one_level
structure with pointers to components. all_levels
All_levels - Assy structure with all comps all_parts
to IGES files. All_parts - Assy to IGES files
with geominfo of comps and assy feats.
iges_out_catia_gdt_width Data Exchange Yes - Enables the desired width of a gtol yes, no no
symbol to be exported to CATIA.
iges_out_catia_notes Data Exchange Yes - Breaks a large note (greater than 70 yes, no no
strings) down into smaller notes, each
producing an IGES entity.

iges_out_dwg_color Data Exchange Yes - Enables the export of RGB yes, no no
information to IGES files. The user-defined
colors in the drawing are exported to an
IGES file as color definition entities. No -
Ignores the user-defined colors in the
drawing when exporting IGES file.
iges_out_dwg_line_font Data Exchange Controls the export of user-defined line yes, no no
font through IGES. No - Exports all
geometry as solid font.
iges_out_ent_as_bspline Data Exchange True - Exports all geometry entities, other true, false FALSE
than lines or arcs, as third-degree B-
splines. False - Does not export entities as
third-degree B-splines.
iges_out_jamais_compliant Data Exchange Yes - Specifies IGES output with special yes, no no
JAMA-IS subset specification, compliant
with the version 1.02 of JAMA-IS (Japan
Automobile Manufacturers Association
IGES Subset Specification). No - Specifies
normal IGES.
iges_out_mil_d_28000 Data Exchange Yes - Specifies IGES output that uses the yes, no no
MIL-D-28000 entity subset.
iges_out_spl_crvs_as_126 Data Exchange Converts all part geometry spline curves to no, yes yes
IGES entity 126 (B-spline) when creating
an IGES file.
iges_out_spl_srfs_as_128 Data Exchange Converts all part geometry spline surfaces no, yes yes
to IGES entity 128 (B-spline) when
creating an IGES file.
iges_out_start_note Data Exchange Yes - Exports the text specified by yes, no no
system_iges_header_file and
user_iges_header_file as a note on the
drawing. To control note placement, use
the configuration file option
put_iges_drawing_entity.

iges_out_symbol_entity Data Exchange Exports a drawing symbol as an IGES yes, no yes
general symbol entity, IGES type number
228 (yes), or as its component entities:
notes and lines.
iges_out_trim_curve_deviation Data Exchange Sets the maximum value for the distance -1
between an XYZ trimming curve
(boundary) and the underlying surface of a
trimmed surface
iges_out_trim_xyz Data Exchange Controls whether or not XYZ data is output yes, no yes
in addition to UV data for trimmed
surfaces.
iges_out_trm_srfs_as_143 Data Exchange Yes - Exports all surfaces to IGES entities no, yes no
141 and 143. This overrides option
iges_out_trm_xyz.
iges_zero_view_disp Data Exchange When IGES geometry does not point to all_views, no_views, as_is all_views
any views or the drawing entity. All_views -
Creates a copy of the entity for each view.
No_views - Does not create the entity at
all. As_is - Creates the entity once, using
only its own transformation information.
ignore_all_ref_scope_settings Without category Controls whether object-specific reference yes, no no
scope settings are ignored or not.
Environment scope settings will still be
enforced. See also
allow_ref_scope_change and
default_ext_ref_scope
ignore_export_geom_declaration Without category Ignore Export Geometry settings. yes, no no
inch_grid_interval Features Modify grid space in inch units for handle 0.125
movement.

info_output_format Environment Setup the default format type for html, text html
information presentation. Text -
information will be output as simple text.
HTML - information will be output as html
data.
info_output_mode Environment Sets default method for presenting choose, screen, file, both both
information. Both - View information on
screen and write information to file. Screen
- View information on screen only. File -
Write information to file only. Choose -
Select method from the INFO OUTPUT
menu.
initial_bend_y_factor Sheetmetal Specifies a constant used to determine the 0.5
neutral bend line for a sheet metal part.
This value is always used for non-
cylindrical bends. It is used for regular
bends only when no bend table is
specified.
initial_drm_warning User Interface Warns the user that they are initiating a yes, no yes
DRM session.When set to "no", this
warning dialog will be skipped.
instance_search_exhaustive File Storage & Specifies extent of instance search. Yes - no, yes no
Retrieval Include file type when entering instance
name in File>Open: type ininput panel
(e.g. inst_name.prt) or select in drop-down
list. If no .idx files are found, only working
dir issearched; each generic is not.
interface_quality Data Exchange Sets amount of checking for overlapping 3
lines and collecting lines of same pen
color before exporting plot or 2-D file. 0 -
No check or collection. 1 - No check, but
collection. 2 - Partial check and collection.
3 - Complete check and collection.

intf_cadds_import_make_solid Data Exchange Allows the user to solidify all closed quilts yes, no no
during import CADDS5 model.
intf_cadds_version Data Exchange Allows the user to switch between the 14, 13, 15 14
default and alternate converter version for
interface with CADDS5
intf_generate_log_file Data Exchange Specifies not to generate or generate short no, short, long short
or long log files for data exchange import
operations.
intf_in_dwg_pnt_ent Data Exchange Yes - Converts an IGES or DXF point yes, no no
entity to a drawing point.
intf_in_dwg_view Data Exchange Controls if associativity in an imported no, 2d_views, 3d_views 2d_views
IGES view is preserved. 3D_VIEWS - tries
to create 3D views if 3D model exists in
the file. 2D_VIEWS - Imported IGES views
work as 2D. No - Imported IGES views are
exploded and become unrelated.
intf_in_extract_profiles Data Exchange Default, no profiles in a data exchange file none, comp, all none
will be extracted for use.
intf_in_granite_direct_enable Data Exchange Allows the user to switch back to the old yes, no yes
'Import Feature' method of reading
Desktop .des files and Granite .g files into
Pro/E. By default, Pro/E directly opens
these models.
intf_in_profile_default Data Exchange Specifies the name of the existing import
profile to use by default.
intf_out_as_bezier Data Exchange Exports all B-splines as Bezier surfaces. yes, no no
intf_out_asm_mapped_item Data Exchange Export assembly components and yes, no no
instances using MAPPED ITEM entity.

intf_out_assign_names Data Exchange Controls how entity names are handled no_name, user_name, no_name
when an object is exported to STEP format id_name
from part or assembly mode. You can give
unique names to Pro/ENGINEER datum
points, datum axes, datum curves,
surfaces, edges, and quilts.
intf_out_auto_layer_ids Data Exchange Yes - Automatically assigns interface IDs yes, no no
for layers that were not assigned IDs
during export. No - Does not assign
interface IDs for layers that were not
assigned IDs during export.
intf_out_blanked_entities Data Exchange Filters export of entities based on their yes, no yes
blank status
intf_out_cat_start_model Data Exchange Specifies Catia start model to be used for
CATIA II .model export.
intf_out_ed_recipe_file Data Exchange Sets the ProductView recipe file for export
to .ed and .edz formats. For use with
Windchill 8.0 and earlier servers
intf_out_layer Data Exchange Layer mapping mechanism providing an none, part_layer, block_layer, none
ability to group entities to layers or blocks. block_nested_layer,
block_view_based_layer,
block_nested_view_based_la
yer
intf_out_layer_rename_table Data Exchange Enables you to assign interface ids to
layers during export
intf_out_max_bspl_degree Data Exchange Controls the maximum degree of exported 16
B-spline surfaces when exporting through
IGES
intf_out_pvs_recipe_file Data Exchange Sets the ProductView recipe file for export
to .pvs and .pvz formats. For use with
Windchill 9.0 and later servers

intf_out_text_length Data Exchange Sets text length in exported 2-D. As_is - as_is, full_size, adjusted full_size
Width of each character is width of
strokes. Full_size - Width of each
character is width of character text box.
Adjusted - Adjusts spacing so no extra
space left and end/start character do not
overlap.
intf_pdf_u3d_create_u3d_files Without category YES - When exporting a Pro/E model as yes, no no
PDF U3D file, create a U3D file of the
same name as the PDF file.
intf_profile_dir Data Exchange Specifies the directory where import and
export profiles are kept. Use the full path
to avoid problems.
intf_pv_recipe_dir Data Exchange Sets the directory for user defined
ProductView recipe files
intf_ug_version Data Exchange Sets the version of Unigraphics interface. nx3, nx4, nx5 nx4
intf_use_variable_size Data Exchange Yes - IGES,DXF,STEP files with variable no, yes yes
sized sheet information are imported
andput on the appropriate variable-size
format. Without a sheet size, the system
tries to apply the correct variable-size
format.No - The IGES,DXF,STEP drawing
isplaced on a standardsized format.
intf2d_fit_incompatible_data Data Exchange YES - For import and export, fixes yes, no no
compatibility problems between 2-D
external formats (such as IGES and DXF)
and Pro/ENGINEER.
intf2d_iges_out_hatch Data Exchange YES - Exports draft xhatching as IGES yes, no no
sectioned area entity. NO - exports draft
xhatching as separate geometric entities.

intf2d_in_acad_ignore_3d Data Exchange YES - Ignore the 3DSOLID entities, if they yes, no no
exist, in the DXF/DWG file being imported
in Drawing mode. Only, the 2D entities are
processed.NO - Create an assembly by
processing the 3DSOLID entities in the
DWG/DXF file being imported in Drawing
mode. This is the default value for this
option.
intf2d_in_create_multiline_note Data Exchange Create a single multi-line note on importing yes, no yes
multi-line text when is set to YES.
intf2d_in_dxf_mapping_file Data Exchange Specifies the mapping file for DXF and
DWG import. Absolute or relative path to
the file can be used.
intf2d_in_iges_hatch_bnd_layer Data Exchange Yes - Places all sectioned areas boundary yes, no no
imported from the IGES file in one layer
named IGES_HATCH_BOUNDARY. NO -
Does not place sectioned areas boundary
in one layer.
intf2d_in_iges_symbols Data Exchange Controls whether to import IGES symbols yes, no yes
as symbols or entities by default. Yes -
Import IGES symbols as symbols by
default. No - Import IGES symbols as
entities by default.
intf2d_in_open_log_window Data Exchange Yes - Opens Import Log File in separate yes, no no
window. No - the Log File will not appear
in the window.
intf2d_out_acad_mtext Data Exchange Create a single MTEXT entity for multi-line yes, no yes
text notes when is set to YES.
intf2d_out_acad_text_align Data Exchange As_is - Exports notes to DXF/DWG with as_is, fit as_is
their original alignment values. Fit -
Exports notes with FIT alignment.
intf2d_out_acad_unicode Data Exchange If set to Yes, non-ASCII characters will be yes, no no
written in UNICODE encoding.

intf2d_out_blanked_layers Without category Enables export of blanked layer entities. If yes, no no
an entity is placed on a layer that is
blanked and this option is set to YES, the
entity will be exported.
intf2d_out_cgm_old_lfont_map Data Exchange Yes - Use the old line font mapping in yes, no no
CGM export: hidden lines to type 2,
CTRLFONT to type 4, PHANTOMFONT to
type 5. No - Use the new mapping: hidden
lines to type 12, CTRLFONT to type 11,
PHANTOMFONT to type 13.
intf2d_out_cgm_ver Data Exchange Provides the ability to choose CGM 1, 3 1
metafile version when exporting from
Pro/E drawing.
intf2d_out_dxf_mapping_file Data Exchange Specifies the mapping file for DXF and
DWG export. Absolute or relative path to
intf2d_out_enhanced_ents Data Exchange Controls whether the enhanced entities spline_and_hatch, spline_and_hatch
(SPLINE and HATCHING) are converted spline_only, hatch_only, none
to the corresponding DXF entities or
represented as separate lines and
polylines.
intf2d_out_iges_layers_with_id Data Exchange Yes - Exports interface IDs of layers as yes, no no
IGES levels.
intf2d_out_line_width Data Exchange YES - Exports line width information to yes, no yes
DXF. NO - all entities are exported with the
default width.
intf2d_out_open_log_window Data Exchange Yes - Opens Export Log File in special yes, no no
window. No - the Log File will not appear
in the window.
intf2d_out_pnt_ent Data Exchange Yes - Exports a drawing point to IGES, yes, no no
DXF or DWG as a point entity. No -
Exports a drawing point as shape entities.

intf2d_out_stroke_text Data Exchange Strokes == text is converted to lines and none, special, all none
dots. "NONE"- Does not stroke out the text
for export. "ALL" - Strokes out all the text.
"SPECIAL" - Strokes out only special
characters.
intf3d_ideas_import_filter Data Exchange Enables UI to selectively import I-DEAS yes, no no
part and assembly models from the I-
DEAS .mf1 and .pkg container files.
intf3d_ideas_install_dir Data Exchange Specifies the path for I-DEAS installation.
Use the full pathname to avoid problems.
intf3d_ideas_run_command Data Exchange Specifies the I-DEAS run command. ideas
Default command is "ideas".
intf3d_in_enable_layer_join Data Exchange No - Join surfaces on import as geometry yes, no yes
is loaded from file. Yes - Use new method
to join surfaces by layer (surfaces
contained on the same layer are joined
together first) with a better chance of
joining those surface elements to form
closed geometry.
intf3d_out_annotations Data Exchange Export annotations with models. yes, no yes
intf3d_out_cat2_ident_crv Data Exchange Specifies model parameter IDENT_CRV -1
while exporting to Catia.
intf3d_out_cat2_ident_pt Data Exchange Specifies model parameter IDENT_PT -1
intf3d_out_cat2_infinity Data Exchange Specifies model parameter INFINITY while -1
exporting to Catia.
intf3d_out_cat2_model_sz Data Exchange Specifies model parameter MODEL_SZ -1
intf3d_out_cat2_sag Data Exchange Specifies model parameter SAG while -1
exporting to Catia.
intf3d_out_cat2_step Data Exchange Specifies model parameter STEP while -1
exporting to Catia.

intf3d_out_catia_v5_version Without category Allows the user to switch between the 10, 14, 15, 16, 17, 18 10
default and alternate converter version for
export to CATIA V5
intf3d_out_datums_by_default Data Exchange Determines whether datum curves are yes, no no
included when exporting IGES files in
Batch mode.
intf3d_out_default_option Data Exchange Controls the type of 3-D data output wireframe, surfaces, surfaces
through Pro/BATCH to an IGES or STEP wireframe_surfaces, solid,
file. shells, none
intf3d_out_export_as_facets Data Exchange Export as faceted data for formats that facets_only, default
support both facet and Brep brep_and_facets,default
representations.
intf3d_out_extend_surface Data Exchange Specifies how surfaces are handled for yes, no yes
exporting files to other systems
intf3d_out_force_surf_normals Data Exchange IGES and PDGS export. Controls normals yes, no no
of non-analytic surfaces. Yes - Forces the
surface normals to point in a consistent
direction. No - Does not force the surface
normals to point in a consistent direction.
intf3d_out_jt_structure Data Exchange Specifies product structure to file structure per_part, fully_shattered, per_part
mapping defined in JT Open Toolkit. monolithic
intf3d_out_notes Data Exchange Exports notes with models. yes, no yes
intf3d_out_parameters Data Exchange Exports parameters with models. all, none, designated all
intf3d_out_surface_deviation Data Exchange Sets maximum allowable deviation -1
between original and resulting surfaces in
the process of converting Pro/ENGINEER
surfaces to spline surfaces. By setting this
you convert surfaces with a better
approximation than by using the current
model accuracy.

intf3d_out_unicode_to_neutral Data Exchange YES - Unicode strings are exported to the yes, no yes
Neutral file, NO - Unicode strings are
converted to ascii characters for Neutral
file export.
intf3d_parasolid_export_schema Data Exchange Allows user to choose the schema to be sch_10004
used for parasolid export. Default is
SCH_10004. Consult online
documentation for other valid schema
settings.
intf3d_ug_install_dir Without category Specifies the path for Unigraphics
installation. Use the full pathname to avoid
problems.
isogen_attribute_map_file Piping Specifies the mapping between isogen /devsrc1/spg/system_1
parameter and attribute name. /text/piping_data/isodat
a/isogen_attribute_ma
p.ptd
isogen_endtype_map_file Piping Specify name of file mapping Pro/Piping /devsrc1/spg/system_1
endtypes with ISOGEN endtypes /text/piping_data/isodat
a/isogen_endtype_ma
p.ptd
isogen_mandatory_attr_file Piping Specify file containing mandatory attribute isogen.fls
filenames used by ISOGEN.
isogen_nominal_size_map_file Piping Specify name of file mapping Pro/Piping /devsrc1/spg/system_1
Size with Nominal Sizes in MM and Inches /text/piping_data/isodat
a/isogen_nominal_size
_map.ptd
isogen_output_files_dir Piping Specify directory to save the PCFs created
by ISOGEN interface
isogen_pcf_filename_format Piping Specify format to create filenames of PCF mnemonic,-
files being created ,specification,-,number

isogen_symbol_map_file Piping Specify name of file for mapping /devsrc1/spg/system_1
Pro/Piping selection names with ISOGEN /text/piping_data/isodat
symbol keys (SKEY)s a/isogen_symbol_map.
ptd
jlink_java_command Without category Specifies a command to start JRE for J-
Link. May contain arguments and
environment variables. Overrides the
default, see also jlink_java2.
jlink_java2 Application Option to force use of Java-2 JRE off, on on
Programming command line ("java" instead of "jre")
Interfaces
kbd_cmd_abbreviation User Interface On - Enables use of abbreviations when on, off off
entering menu commands from the
keyboard.
kbd_selection User Interface Provides the ability to select locations in no, yes no
the graphics area via the keyboard.Yes -
Selection in the graphics area may be
performed via the keyboard.No - Selection
in the graphics area requires a mouse.
keep_info_datums Features Sets the initial state of how the system yes, no yes
treats datums and features created at run
time.
keep_model_in_open_window Without category Controls whether a model will be kept no, yes no
displayed in its window while accessory
window is used.
keep_style_items_hidden_on_exit Without category Keep style entities hidden after exiting of yes, no no
the Style feature definition.
lang_propagate File Storage & Specifies language storage options. The yes, no yes
Retrieval option provides flexibility for objects that
use a different language than the current
last_session_directory_path Without category Sets the directory that holds the temp files /home/kapig/.wf/.settin
for the session recording mechanism. gs

last_session_retrieval Without category Yes - Activates recording mechanism that yes, no yes
enables the session to be retrieved during
the next session. No - The recording
mechanism is not available and the
session can not be retrieved.
let_proe_rename_pdm_objects Data Management Determines whether an object fetched no, yes no
from a PDM database can be renamed in
a Pro/Engineer session.
linear_tol Dimensions & An alternate format for setting default 0
Tolerances linear tolerance dimensions. First value
sets the number of decimal places.
Second value is the actual tolerance. For
example, 6 0.000025 sets tolerance to six
decimal places. The default tolerance is
0.000025.
linear_tol_0.0 Dimensions & Specify a range for default tolerances of 1
Tolerances linear and angular dimensions. These
values affect only models created after the
tolerance options are specified in the
configuration file.
configuration file.
configuration file.

configuration file.
configuration file.
configuration file.
lods_enabled Model Display Determines whether or not the system no, yes no
uses Level of Detail in shaded models
during dynamic orientation (panning,
zooming and spinning).
lods_value Model Display When lods_enabled is Yes, this value 50
specifies the default value used to display
LODs. The value is a percentage of the
edge size vs the total size of the model.
maintain_limit_tol_nominal Dimensions & Maintains the nominal value of a yes, no no
Tolerances dimension regardless of the changes that
you make to the tolerance values.
make_aux_view_notes Drawing Automatically adds view names to auxiliary yes, no no
views using AUX VIEW* viewname-
viewname. You can modify the view name
after adding the view to the drawing.

make_parameters_from_fmt_tables Drawing Determines the handling of values entered yes, no no
in a format table when you replace one
drawing format with another. Yes - Stores
entered values for format table and copies
them with the table. No - Prompts you to
re-enter all the values for the format table.
make_proj_view_notes Drawing Automatically adds view names to yes, no no
projection views in the format "VIEW
viewname-viewname." You can modify the
view name after adding the view to the
drawing.
manikin_drag_auto_locks Without category Manikin drag auto locks yes, no yes
mapkey Miscellaneous Stores a keyboard macro. Use
Tools>Mapkeys to create, edit and delete
mapkeys.
mapkeys_execution Miscellaneous Mapkeys execution behavior. No no_feedback, no_feedback
Feedback - The mapkey is executed with execute_with_feedback,
no feedback, Execute with Feedback - A stop_at_failure
warning message is given upon failure
during execution, Stop at failure - The
execution stops at failure and a feedback
message is provided.
mark_approximate_dims Dimensions & Yes - Displays a tilde (~) in front of a yes, no no
Tolerances dimension that is set to display as a
fraction and has an actual value that is not
rounded to equate exactly to the displayed
fractional value (the fraction shows 7/32
but the actual value is .22, not 0.21875).
mass_property_calculate Environment Calculate mass properties upon by_request, automatic by_request
regeneration or by user request.
mat_assign_appearance Colors Control whether default appearance in yes, no yes
material definition is automatically
assigned to a part.

material_upd_smt_bend_table Sheetmetal Defines whether assignment of material to always_replace, always_replace
the model via Pro/Toolkit will overwrite never_replace
existing bend table data and y factor
value. Always Replace - Overwrites
existing data. Never Replace - Keeps
existing data
mathcad_analysis_directory File Storage & Sets the default directory for the Mathcad
Retrieval files to be used for Mathcad analysis
calculations. Use the full pathname to
avoid problems.
mathcad_automapping Environment Toggles Mathcad analysis automapping of yes, no no
variables
max_animation_time Model Display When the orientation, or zoom state, of the 1
Pro/ENGINEER window changes, an
animation sequence of a predefined
duration takes place. This option controls
the maximum time the system spends
animating.
max_image_dimension Model Display Set the upper bound dimension on images 4096, 1024, 2048, 8192, 4096
loaded into Pro/ENGINEER. Images larger 16384
than this limit will be rescaled to this upper
bound during loading.
mdl_tree_cfg_file User Interface Specifies the Model Tree configuration file
to be loaded when Pro/ENGINEER is
started.
mdo_cl_executable Mechanism Path for Custom Load executable.
mdo_density Mechanism Mass density for dynamics. 0
mdo_explicit_integration Mechanism Enable explicit integration for dynamic yes, no no
analyses.
mdo_spring_wire_radius Mechanism Spring wire radius for dynamics spring 0.15
icons.

measure_dec_places Without category This configuration option controls the -1
number of digits after the decimal point. If
value = -1, this configuration is ignored
and measure_sig_figures is used
measure_sig_figures Environment Sets the number of significant figures 6
displayed as results when using the
Measure dialog box from the Info menu.
medusa_2d_config_file Data Exchange Specifies the Medusa 2D Interface config.
file. Absolute or relative path to the file can
be used.
mentor_ver_2_0 Data Exchange Yes - Exports the file in IDF 2.0 format. No yes, no yes
- Exports the file in IDF 1.0 format unless
IDF 2.0 is selected from the ECAD
FORMAT menu.
menu_font User Interface Specify font used in the Pro/ENGINEER
menu bar, menus, and all their children.
Specify the comma-delimited variables in
any order (italic bold, 24, times or 24,
times, italic bold have the same effect).
Any omitted variable uses the standard
setting.
menu_manager_position User Interface outside: Top left corner of Menu Manager outside, inside, adaptive adaptive
is aligned to top right corner of
window,inside: Top right corner of Menu
Manager is aligned to top right corner of
graphics area,adaptive: Behavior is like
'outside' unless there's not enough room
available, in which case behavior is like
'inside'.
menu_mapper_location User Interface Specify your own URL for the Menu
Mapper button in the help menu.
menu_show_instances File Storage & Determines whether instance names listed yes, no yes
Retrieval in instance index files appear in file lists.

menu_translation User Interface Specifies the language in which the menus yes, no, both yes
display when running non-English version
of Pro/ENGINEER.
merge_smt_srfs_without_seam Sheetmetal Yes - no edge left at the merge if the yes, no yes
sheetmetal surfaces being merged are
same surfaces. No - edge is left even
between same sheetmetal surfaces.
merge_type Features Sets the default merge type surface merge join, intersect intersect
operations.
mesh_spline_surf Model Display Turns the blue mesh surface lines on or no, yes no
off.
meter_grid_interval Features Modify grid space in meter units for handle 0.001
movement.
mfg_auto_ref_mfg_template Without category Enable/Disable auto referencing for yes, no no
Manufacturing template
mfg_auto_ref_prt_as_chk_srf Manufacturing Yes - In 3, 4, and 5 axis contour and yes, no yes
conventional mill sequences, the entire
reference part is selected as check
surfaces by default when computing the
NC sequence toolpath for those
sequences. No - You select the check
surfaces.
mfg_auto_retract_clear_dist Without category Specifies distance between automatically -0.001
created retract plane and step coordinate
system. Will be applied to the new steps
created in process manager if operation
retract cannot be used.
mfg_custom_tool_param_file Manufacturing Defines the file that contains the user-
defined tool parameters' list.
mfg_customize_dialog Manufacturing Yes - Uses the new customize dialog box yes, no yes
for customizing NC sequences. No - Uses
the Release 19.0 menus.

mfg_cutline_save_mesh Manufacturing Yes - Save / Retrieve Mesh for yes, no yes
subsequent cutline recalculations, No -
New Mesh will be computed for each
cutline recalculations.
mfg_ijk_num_digits Manufacturing Sets the number of digits for i, j, k data 10
points in a CL data file.
mfg_info_location Manufacturing top left /bottom right -Position of the mfg. top_left, bottom_right top_left
Info dialog box.
mfg_modal_command_file Manufacturing Enables you to make some of the APTn
index topics modal, which means that you
repeatedly get a list of major keywords
corresponding to this topic upon
completing a command line.
mfg_param_auto_copy_from_tool Manufacturing Do not copy any parameter of the tool to none, all, misc, cutting none
the sequence parameter tree.
mfg_process_print_dir Without category Specifies the directory where Mfg Process
html page get stored. Use the full
mfg_process_table_setup_dir Without category Specifies the directory where Mfg Process
Table settings get stored. Use the full
mfg_process_template_dir Without category Specifies the directory where Mfg Process
Templates get stored. Use the full
mfg_setup_dir Without category Specifies the directory which contains all
manufacturing related setup files for the
current session.
mfg_start_model_dir File Storage & Provides the complete path to the
Retrieval directory containing mfg start assemblies.

mfg_tap_mat_rem_coef Without category The factor is used to consider the 1
threading of tapping tool. The estimate
removed material value of tapping
sequence is presented as estimate
removed material value multiplied by this
factor. The factor should be greater than 0
and upto 1.0.
mfg_template_dir Manufacturing Specifies the storage directory for NC
templates. Specify full path to avoid
problems. NC templates are used in
Expert Machinist. Templates store the
recipe for a toolpath as the method of tool
retrieval.
mfg_tool_dialog_setup_file Without category Specifies the XML based file to setup Tool
Dialog.
mfg_udf_info_setup_file Without category Specify name and path of the file
containing udf and mfg criteria values .
mfg_workpiece_transparency Manufacturing Controls the workpiece transparency in 0.5
shaded model display. You can change
the value in the range between 0.1 and 1.
The bigger the value, the more transparent
the workpiece. The default value is 0.5.
mfg_xyz_num_digits Manufacturing Sets the number of digits for x, y, z data 10
points in a CL data file.
millimeter_grid_interval Features Modify grid space in millimeter units for 1
handle movement.
min_animation_steps Model Display When the orientation, or zoom state, of the 6
Pro/ENGINEER window changes, an
animation sequence of predefined duration
takes place. This option controls the
minimum number of frames used in the
animation sequence.

minimum_angle_dimension Dimensions & Controls the minimum angle value under 1
Tolerances which Pro/ENGINEER assumes colinearity
of the selected items when creating a
driven dimension.
model_allow_ref_scope_change Without category Yes - Users can change the scope setting yes, no yes
of components.
model_grid_balloon_display Environment Controls the display of grid balloons. yes, no yes
model_grid_neg_prefix Environment Enables you to specify the prefix to use for -
negative numbers in the balloon capture of
the grid.
model_grid_num_dig Environment Controls the number of decimal places
displayed in the balloon capture. 0 - Only
integers display.
model_grid_spacing Environment Sets the default model grid spacing. 1.5
model_notes_as_labels Environment Gives the option to display notes as either no, yes no
full text or as label. Can also be toggled
with environment option "Display Notes as
Names."
model_rename_template File Storage & Sets the default renaming convention for
Retrieval copied assemblies. The default new name
is the old name appended with an
underscore (_). Adding a template such as
[*a1*=*b1*] changes every
occurrence of a1 to b1 (e.g.
TOP_A1_BRACKET copies to
TOP_B1_BRACKET).
model_tree_start Environment Toggles display of the Model Tree. Yes - no, yes yes
Displays the Model Tree window along
with its model. No - Does not display the
Model Tree window.
modelcheck_enabled Environment Enable ModelCHECK yes, no yes

modeltree_show_gen_of_instance User Interface Determines whether the generic name is yes, no no
displayed as an extension of the instance
name in the model tree and other model
name lists.
modified_objs_in_new_dir File Storage & Yes- During Save a Copy operations, any yes, no no
Retrieval modified object that is not renamed will be
saved in the new directory.No- Any
modified object that is not renamed will be
saved to the retrieval directory.
mold_layout_origin_name Casting & Mold Design Sets a specified coordinate system as the
default for the cavity layout origin.
mold_vol_surf_no_auto_rollback Casting & Mold Design Do not perform automatic rollback while yes, no no
modifying mold volumes or parting
surfaces.
motion_envlp_alert Mechanism Displays the Motion Envelope alert the first yes, no yes
time the quality level is increased.
mp_calc_level Without category Specifies the level of mass properties assembly_only, all_models assembly_only
calculation.
mp_dens_ft_column_mtrl_assigned Assembly Yes - Allows adding an MP_DENSITY no, yes no
column in FT when a material is assigned
to a model. When set may cause the same
material to have different values for the
Density parameter in different instances.
Does not affect legacy models.
msg_translation User Interface Specifies language in which Messages are yes, no yes
displayed when running non-English
version of Pro/ENGINEER.
mtrl_convert_units Assembly If set to "Yes" Pro/E will automatically yes, no yes
convert units in materials from a library to
the model system of units.
multiple_skeletons_allowed Without category Allows/restricts multiple skeleton. yes, no no

multipoint_location_count Electromechanical Specifies the maximum number of cable 1
locations to allow in one feature. To create
locations as features, set to 1.To limit the
number of locations in one feature, set to a
number between 2 and 100.
native_kbd_macros User Interface Specifies support of keyboard macros no, yes no
written in native language (for example,
German).
nc_autodoc_param_dir Manufacturing Location of the setup file that describes
which process parameters will be included
in the parameter table.
nc_autodoc_report_dir Manufacturing Location for storing the report and images
generated by the shop floor
documentation tool.
nc_autodoc_setup_dir Manufacturing Location for documentation setup files that
describe which process parameters will be
included in the parameter table.
nc_autodoc_template_dir Manufacturing Location of the style sheet and default
images used for shop floor documentation.
nc_jobman_visible Without category Yes - make "Submit Path" and "Abort yes, no no
Path" visible. No - make "Submit Path"
and "Abort Path"invisible.
nccheck_type Manufacturing Vericut will be used for NC material vericut, nccheck vericut
removal simulation.
ncl_file_extension Manufacturing Sets the default file extension for Pro/MFG ncl
CL data files. Enter the file extension only
(without the preceding "."). For example,
apt produces filename.apt.
ncmdl_bar_stock_part_path Manufacturing Sets path for storage and retrieval of stock /devsrc1/spg/system_1
instances for creating workpiece in NC /text/ncmdl_data/ncmdl
Model. Specify full path, including part _bar.prt
name, to avoid problems.

ncmdl_billet_stock_part_path Manufacturing Sets path for storage and retrieval of stock /devsrc1/spg/system_1
instances for creating workpiece in NC /text/ncmdl_data/ncmdl
Model. Specify full path, including part _billet.prt
name, to avoid problems.
ncpost_type Manufacturing Set to GPOST to access the default post gpost, ncpost
processor supplied with Pro/NCPOST.
ncseq_outbnd_curve Without category Yes - Create out bound curve. no no
ncseq_outbound_curve Manufacturing Yes - Create out bound curve. yes

new_parameter_ui User Interface Enable the new parameter editor and user yes, no yes
interface.
new_ref_part_name_disabled Without category yes, no yes
new_relation_ui User Interface Enable the new relations editor and user yes, no yes
interface.
new_turn_scan_type Manufacturing Allows to use New turn scan types for yes, no yes
Turning NC sequences.
new_wf5_simp_rep_ui Without category Yes - Use Component Chooser base Simp yes, no yes
Rep UI, No - Use old Simp Rep definition
UI.
number_user_colors Colors Specifies the maximum number of different -1
wireframe colors that can display in the
graphics area(s) at any given moment.
offset_line_def_color Assembly Process Specifies the color that offset lines are 0
displayed in drawings.
offset_line_def_font Assembly Process Specifies the font in which offset lines are
displayed in drawings.
old_style_set_datum Without category Yes - datum properties dialog has button yes, no yes
for old-style set datum. No - datum
properties dialog does not have button for
old-style set datum.

online_resources_location User Interface Specify your own URL for the Online
Resources button in the help menu.
open_draw_simp_rep_by_default File Storage & Set to "Yes" to always invoke the open rep yes, no no
Retrieval dialog when opening a drawing.
open_simplified_rep_by_default File Storage & Retrieves a model in a specified no
Retrieval representation. Yes - uses Open Rep
dialog. No - retrieves the Master
representation. Specified Name - retrieves
the model in the specified representation
name if it exists or the Default
representation.
orientation Model Display Establishes the initial standard view isometric, trimetric, trimetric
orientation. User_default - System uses X- user_default
axis and Y-axis values defined by options
x_axis and y_axis.
orientation_style Without category Set spin orientation style to dynamic or anchored, dynamic dynamic
anchored.
orthogonal_snap Electromechanical Controls non-90 degree routing in yes, no yes

Pro/DIAGRAM. Yes - Turns the Ortho
Snap function on. You can sketch wires
only at the default horizontal and vertical
orientation. No - Enables you to sketch
wires in drawings at angles other than the
default.
output_mfg_xml Without category Allows export/import mfg model to/from yes, no no
xml file. Yes- make Export/Import options
visible. No - make them invisible.
overlays_enabled System Yes - Enables Pro/ENGINEER screens yes, no no
and menus to be placed on different
overlay layers of the hardware graphics
card. This frees memory for
Pro/ENGINEER use.

override_store_back File Storage & Forces the storage of objects retrieved yes, no no
Retrieval from other directories to the current
working directory.
package_constraints Assembly Action to take for packaged components in disallow, freeze, update update
Assembly mode. Update - Updates
components if assembly changes. Freeze
- Does not move components if assembly
changes. Disallow - Does not allow
packaged components in assembly (must
be fully constrained).
package_ref_alert Assembly Control whether alert dialog is given when yes, no no
packaged component is referenced. Yes -
Allow alert when a packaged component is
referenced. No -No Alert is given when a
packaged component is referenced.
param_dec_places User Interface Sets the number of decimal places (0-14) 6
to display in parameters.
parameter_dialog_setup_file User Interface Setup for the parameter dialog
configuration file.
parenthesize_ref_dim Dimensions & Encloses reference dimensions in yes, no no
Tolerances parentheses. No - Follows reference
dimensions with the text "REF".
pattern_exact_incremental_dim Without category When pattern incremental dimensions are no, yes no
calculated from expressions, round them
to the decimal places set by config option
default_dec_places.
pattern_relations_copy User Interface Determines whether relations of pattern yes, no yes
leader are inherited by pattern members.
pdf_linecap Data Exchange 0 - Butt cap: stroked lines are squared off butt, round, projecting square butt
at the endpoint of the path.There is no
projection beyond the end of the path.

pdf_linejoin Data Exchange 0 - Miter join: outer edges of the strokes miter, round, bevel miter
for the two segments are extended until
they meet at an angle.
pdf_use_pentable Data Exchange No - PDF export does not use any defined no, yes no
pentable changes as would be applied to
plotting the drawing.
pdm_rev Data Management Specify how the system parameter, pdmrev_fmt_rev_ver, pdmrev_fmt_rev_ver
PDM_REV, should be formatted. Only pdmrev_fmt_rev,
useful for objects submitted to Pro/PDM or pdmrev_fmt_branch_rev_ver,
Pro/INTRALINK. pdmrev_fmt_branch_rev
pen_slew Printing & Plotting Sets the pen speed for both x and y -1
directions for plotters that are compatible
with this option. Consult your plotter's user
guide for more information.
pen_slew_xy Printing & Plotting Sets the pen speed for the x and y -1
directions individually for plotters that are
compatible with this option.The first value
is the x value and the second, the y value.
They should be separated by a space.
pen_table_file Printing & Plotting Specifies a default pen mapping table table.pnt
which supersedes other pen mapping
information.
pen1_line_weight Printing & Plotting Sets the weight of entities plotted with 4
pens using an electrostatic plotter. The
weight is a range from 1 (thinnest) to 16
(thickest).
(thickest).

(thickest).
(thickest).
(thickest).
(thickest).
(thickest).
(thickest).
photorender_capability_warnings Photorender Allows the user to disable warnings about yes, no yes
PhotoLux only capabilities.
photorender_default_height Photorender Sets the default height (in pixels) for the 450
custom size rendered output
photorender_default_width Photorender Sets the default width (in pixels) for the 600
custom size rendered output

photorender_memory_usage Photorender Sets the memory limit that 256
Pro/PHOTORENDER allows for model
processing. Do not use commas in the
memory value, as Pro/ENGINEER
interprets these as decimals.
photorender_preview_scale Photorender Allows user defined size ratio at which 0.5
Pro/PHOTORENDER will render, using
the default Render To: Full Window
Preview setting. Increasing the value
creates higher quality rendering with
slower performance. Reducing the value
produces reverse results.
pick_aperture_radius System Specifies the size of the area about the 7
mouse when making selections. Units are
1/1000 of screen size.
pick_chain_tangent_only Drawing Specifies the extent of draft entity chains yes, no no
selected. Yes - Only entities in the chain
that are tangent will be selected. No - All
entities connected end to end will be
selected.
pipe_3d_bend_theor_int_pts Without category Yes - Displays theoretical intersections no, yes no
and bends in three-dimensional models.
pipe_bend_locations_csys_units Piping Define which assembly units will be used yes, no no
for the piping bend locations calculations.
Yes - to use coordinate system assembly
units. No - to use pipeline assembly units.
pipe_pre_22_bendinfo_conv Piping Convert bend report information generated yes, no yes
prior to Pro/ENGINEER 2000i-2 to current
saved analysis format.
pipe_solid_centerline Piping Yes - Display Pro/PIPING centerlines. No - yes, no yes
Do not display Pro/PIPING centerlines.

pipe_solid_label_format Piping Specify the pipe solid label format that will size,-,specification,-
be used to automatically generate pipeline ,mnemonic,-,number,-
labels. ,insulation
pipe_update_pre_20_int_pts Piping Yes - Pipelines created prior to Release yes, no no
20.0 are updated with intersection point
entities. The entities are created in session
by Info>Regen Info or when you retrieve
the model.
pipeline_assembly_library_dir Piping Sets the default pipeline assembly library /devsrc1/spg/system_1
directory. /text/piping_data/pipeli
nelib/
pipeline_assembly_name_format Piping Sets the default pipeline assembly name mnemonic,-,number
format.
pipeline_label_format Piping Specify the pipeline label format that will size,-,specification,-
be used to automatically generate pipeline ,mnemonic,-,number,-
labels. ,insulation
pipeline_solid_start_part_name Piping Sets the default pipeline solid start part pipeline_solid_start.prt
name.
pipeline_spool_label_format Piping Specify the pipeline spool label format that mnemonic-number-
will be used to generate the spool labels prefix[0]spoolnum
during pipeline spool generation. [01]suffix[]
pipeline_start_assembly_name Piping Sets the default pipeline start assembly pipeline_start.asm
name.
piping_appearance_map_file Piping Sets the default piping appearance map /devsrc1/spg/system_1

filename. /text/piping_data/maste
r_catalog/piping_appe
arance.map
piping_bolt_nut_select_file Piping Piping bolts and nuts selection file. /devsrc1/spg/system_1
/text/piping_data/maste
r_catalog/piping_bolt_n
ut_select.ptd

piping_design_method Piping Sets the current Piping design method for non_spec_driven, non_spec_driven
pipeline modeling. spec_driven, user_driven
piping_enable_designate_report Piping Enable designatable reports for spec- yes, no yes
driven piping.
piping_end_compatibility_file Piping Sets the default piping end compatibility /devsrc1/spg/system_1
filename. /text/piping_data/maste
r_catalog/piping_end_c
ompatibility.ptd
piping_extend_dim_scheme Piping Specify a dimension scheme for piping cartesian, cylindrical, cartesian
extend segment. spherical
piping_fitt_angle_tolerance Piping Sets the default piping fitting angle 1.5
tolerance value.
piping_fitt_category_map_file Piping Sets the default piping fitting category map /devsrc1/spg/system_1
filename. /text/piping_data/sampl
e_project/piping_fitt_ca
tegory_map.ptd
piping_fitt_library_dir Piping Sets the default piping fitting library /devsrc1/spg/system_1
directory. /text/piping_data/fittingl
ib/
piping_fluid_parameter Piping Enables/disables the Parameters tab in no, yes no
Create Pipeline Dialog
piping_insulation_dir_file Piping Sets the default piping insulation directory /devsrc1/spg/system_1
filename. /text/piping_data/sampl
e_project/piping_insula
tion_dir.ptd
piping_joint_fitting_clearance Piping Sets the piping joint minimum fitting 1
clearance value.
piping_joint_fitting_offset Piping Sets the piping joint minimum fitting offset 1
value.

piping_manufacture_dir_file Piping Sets the default piping manufacture /devsrc1/spg/system_1
directory filename. /text/piping_data/maste
r_catalog/piping_manu
facture_dir.ptd
piping_material_file Piping Sets the default piping material filename. /devsrc1/spg/system_1
/text/piping_data/maste
r_catalog/piping_mater
ial.ptd
piping_mcat_dir Piping Sets the default piping master catalog /devsrc1/spg/system_1
directory. /text/piping_data/maste
r_catalog/
piping_mcat_dir_file Piping Sets the default piping master catalog /devsrc1/spg/system_1
directory filename. /text/piping_data/maste
r_catalog/piping_mcat_
dir.ptd
piping_min_bolting_clearance Piping Sets the default piping minimum bolting 1
clearance value.
piping_project_data_dir Piping Sets the default Project data directory. /devsrc1/spg/system_1
/text/piping_data/sampl
e_project/
piping_schematic_driven Piping Set the Schematic Driven Pipeline no, yes no
Modeling ON/OFF
piping_schematic_xml_dir Piping Specify directory with full path containing /home/kapig/config_pr
schematic information XML file(s). o/
piping_spec_dir_file Piping Sets the default piping specification /devsrc1/spg/system_1
directory filename. /text/piping_data/sampl
e_project/piping_spec_
dir.ptd
piping_system_tree_format Piping Sets the default piping model tree format. mnemonic
piping_thumb_wheel_increment Piping Sets the default piping thumb wheel 1
increment value.

piping_thumb_wheel_ratio_inc Piping Sets the default piping thumb wheel ratio 0.01
increment value.
piping_wildfire_convert Piping Always ask before converting old piping manual, never, automatic manual
assemblies to update the network
structure.
placement_rep_by_default File Storage & Retrieves the assembled component in a none
Retrieval specified representation. None - retrieves
the representation specified in
configuration option
open_simplified_rep_by_default.
plot_file_dir Printing & Plotting Specifies the directory where plot files
should be written. Use the full pathname to
avoid problems. For example
/home/users/plotfiles.
plot_linestyle_scale Printing & Plotting Specifies the scaling factor for the 1
DOTFONT line style in a plot.
plot_names Printing & Plotting Yes - Plot files are given descriptive yes, no
extensions when created. No - All plot files
are simply given the extension .plt.
plot_names_with_sheet Without category Yes - Plot file names are appended with yes, no no
_(sheet number) before file extension.
plot_proceed_dialog Printing & Plotting Yes - Enables the Plot Proceed dialog yes, no no
which provides a choice for delaying the
printing of plot files. This is useful for large
plots when using lp print commands. The
lp command may not access the plot file
before it is removed resulting in no output.
plot_to_scale_full_window Printing & Plotting Provides the ability to exclude empty yes, no
window space when plotting the model to
scale.
plotter Printing & Plotting Establishes the default plotter for making
plot files.

plotter_command Printing & Plotting Sets the command that you use to start a windows_print_manager
plot on your system; for Windows NT or
Windows 95, windows_print_manager
option configures Pro/ENGINEER to plot
to a recognized device in the Windows NT
or Windows 95 print manager.
plotter_handshake Printing & Plotting Specifies the type of plotter handshake hardware, software
initialization sequence generated in the
plotter files.
popuphelp_font User Interface Specify font used in the Pro/ENGINEER
pop-up help. Add the comma-delimited
variables in any order (italic bold, 24, times
or 24, times, italic bold have the same
effect). Any omitted variable uses the
standard setting.
postscript_compression Printing & Plotting Specifies whether or not to compress yes, no no
exported shaded PostScript files. Yes - A
shaded postscript file created with
File>Export will be compressed. This will
increase processing time.
preferred_publish_deliverable Drawing Set the default preferred deliverable for print, iges, set, dxf, step, print
the Publish Context in Drawings. cgm, pdf, dwg, tiff, medusa,
stheno
preferred_save_as_type File Storage & Allows customizing the order of the Type
Retrieval selections found under File ->Save A
Copy.
prehighlight Environment Yes - Selectable items beneath the pointer yes, no yes
are highlighted prior to being selected. No
- Selectable items beneath the pointer are
not highlighted prior to being selected.
prehighlight_tree Environment Yes ? Selectable items in the model tree yes, no no
and layer tree are highlighted prior to
being selected.

preserve_comp_color_in_preview Assembly Yes - During component placement, no, yes no
component being assembled will retain its
normal colors.No - During component
placement, component being assembled is
shown in preview color.
prev_proc_comp_def_color Assembly Process Specify the default color for components 0
added to a process assembly in a previous
step.
prev_proc_comp_def_font Assembly Process Specify the default font for previously
added components in a process assembly.
pro_ansys_path Without category Specifies path to ANSYS executable.
pro_catalog_dir Casting & Mold Design Sets the path to the catalog directory
containing the catalog menu and the
names of other catalog files, such as
ejector pins. For example: pro_catalog_dir
proe_loadpoint/apps_data/mold_data/catal
og. Use full path name to avoid problems.
pro_cav_lay_rule_dir Casting & Mold Design Sets the default directory for cavity layout
rules. Use the full path name to avoid
problems.
pro_cbltrm_dir Electromechanical Sets the directory from which terminators
are retrieved. Use the full pathname to
avoid problems.
pro_colormap_path Colors Specifies the directory path for a color map
(.map) file to be loaded from disk. Use the
full path name to avoid problems.
pro_crosshatch_dir File Storage & Specifies a default directory for your cross-
Retrieval hatch library in which you can save cross-
hatching patterns for later retrieval. Its
value is the full path name of the default
directory.

pro_dtl_setup_dir Drawing Sets the directory for the drawing setup
files. If this option is not set, the system
uses the default setup directory.
pro_editor_command User Interface Enables use of an editor other than the
system editor when the option editor has
been specified as the value for the options
part_table_editor or relation_file_editor.
pro_font_dir File Storage & Sets the default font directory /devsrc1/spg/system_1
Retrieval (Pro/ENGINEER will load all fonts in this /text/fonts/
directory into the drawing regardless of the
contents of the system and working
directories).
pro_format_dir Drawing Sets the default directory for the drawing
format library. Use the full pathname to
avoid problems.
pro_gplug_dir Data Exchange Specifies the directory in which Granite /devsrc1/spg/system_1
application plug-ins are located. Use the /sun_solaris_x64/gplug
full pathname to avoid problems. s/
pro_group_dir Features Sets the default directory for the user-
defined feature (UDF) library. If not
specified, your current working directory is
the default. Use the full pathname to avoid
problems.
pro_insulation_dir Piping Specifies the directory to search for
insulation files used in Pro/PIPING. Use
pro_library_dir File Storage & Sets the default directory for the
Retrieval Pro/ENGINEER libraries (or any libraries
you have built containing the proper index
menu files). Use the full pathname to avoid
problems.

pro_material_dir File Storage & Sets the default directory for the part
Retrieval material library. Use the full pathname to
avoid problems.
pro_mdb_dir Manufacturing Sets the default directory for the
Machinability Database (MDB) files. Use
the full pathname to avoid problems.
pro_mf_cl_dir Manufacturing Sets the default directory for the
manufacturing CL data files.Use the full
pro_mf_clamp_dir Manufacturing Specifies the directory where the
manufacturing clamps can be found.
pro_mf_param_dir Manufacturing Sets the default directory for the
manufacturing parameter files. Use the full
pro_mf_tprm_dir Manufacturing Sets the default directory for the
manufacturing tool files. Use the full
pro_mf_workcell_dir Manufacturing Sets the default directory for the
manufacturing workcell files. Use the full
pro_mfg_cmdsyn_dir Manufacturing Sets the default directory for the syntax
menu files in Pro/MFG. Use the full
pro_nastran_path Without category Specifies the path to the MSC/NASTRAN
executable (nastran).
pro_note_dir Drawing Specifies the directory from which to /home/kapig/config_pr
retrieve notes entered from a file. Use the o/
pro_palette_dir Drawing Sets the default directory for drawing /devsrc1/spg/system_1
symbol palette files. /symbols/palette/
pro_pip_fitt_dir Piping Specifies the directory to search for fittings
used in Pro/PIPING.

pro_pip_lnstk_dir Piping Specifies the directory to search for
linestock files used in Pro/PIPING. Use full
path name to avoid problems.
pro_plot_config_dir Printing & Plotting Sets the directory of your user-defined
plotter configuration file. Use the full
pro_sheet_met_dir Sheetmetal Sets the default directory of your user-
defined bend tables. If not set, the
Pro/SHEETMETAL supplied bend tables
are used. Use the full path name to avoid
problems.
pro_smt_params_dir Sheetmetal Specifies the directory to save/retrieve
Sheet metal parameters files.Use full path
name to avoid problems.
pro_solver_name Without category Specifies the name of the user-defined
solver to be included in the SOLVE menu.
See also pro_solver_path.
pro_solver_path Without category Specifies the path to the user-defined
solver whose name is defined in the
SOLVE menu. See also pro_solver_name
pro_spool_dir Electromechanical Sets the directory from which spools are /home/kapig/config_pr
retrieved. Use the full pathname to avoid o/
problems.
pro_stheno_command Data Exchange Specifies the command for Stheno launch.
pro_surface_finish_dir File Storage & Sets the default directory for your user- /devsrc1/spg/system_1
Retrieval defined surface finish symbols. Use the full /symbols/surffins/
pro_symbol_dir Drawing Set and automatically create the default /home/kapig/config_pr
directory for saving and retrieving user- o/
defined symbols. If you do not specify a
directory, the system uses the current
working directory. Use full path name to
avoid problems.

pro_texture_library Photorender Allows the user to specify a different
graphics library.
pro_unit_length Environment Sets the default units for new objects. unit_inch, unit_foot, unit_mm, unit_inch
unit_cm, unit_m
pro_unit_mass Environment Sets the default units for mass for new unit_ounce, unit_pound, unit_pound
objects. unit_ton, unit_gram,
unit_kilogram, unit_tonne
pro_unit_sys Environment Specifies the default system of units for mks, cgs, mmns, fps, ips,
new models. proe_def, mmks
pro_weld_params_dir Weld Specifies the directory to search when a
weld parameter file is needed.
prodevdat Application Specify the name of the Pro/Develop
Programming registry file.
Interfaces
proe_memory_buffer_size Environment Specify the size in megabytes of the 50
memory buffer to be reserved by
Pro/ENGINEER for system out of memory
condition. You must restart
Pro/ENGINEER for the change to take
effect.
profile_output_utils Manufacturing Affects CL-Data output for profile milling yes, no no
sequences. Yes - Sequence parameter
output_point is available with options: tip -
Toolpath is output with respect to the tool
center; on_profile - Toolpath is output with
respect to the profile of the tool.
prompt_on_erase_not_disp File Storage & Specifies whether or not to display a yes, no no
Retrieval prompt allowing you to save your
undisplayed objects. This option is used in
conjunction with the Erase > Not
Displayed command on the File menu.

prompt_on_exit User Interface Determines if you are prompted to save yes, no no
objects when exiting a Pro/ENGINEER
session.
proncpost_dbf Manufacturing Enter directory path to NCPost database
file.
propagate_change_to_parents File Storage & When saving objects with option yes, no no
Retrieval save_objects set to Changed or
Changed_and_specified, Pro/ENGINEER
verifies which models are. Yes - Any
model that is a parent of a changed model
is considered to be a changed model
when determining what to save.
propagate_inactive_annotation User Interface Yes - causes the propagation of inactive no, yes yes
annotation.
prorembatch_queue_manager Manufacturing Enables toolpath computation on a
separate host machine. Required values
are Processor name, Remote machine's
hostname, Type of transport (always 0),
RPC processor number (same as that of
remote processor), Version of queue
manager.
protable_in_background System Yes - Starts Pro/TABLE editor in the no, yes yes
background. Reduces time between
pressing a menu button that uses
Pro/TABLE and entering the data.
protkdat Application Specify the Pro/TOOLKIT registry file.
Programming
Interfaces
provide_pick_message_always User Interface No - A message describing the yes, no no
(pre)selected item is provided only while
querying. Yes - A message describing the
selected item is provided in all cases (i.e.
even when Query is not used).

ps_output_with_pagesize Printing & Plotting Specifies whether or not to include yes, no yes
pagesize information when generating
postscript files from Pro/ENGINEER. No -
Pro/ENGINEER will omit Adobe level 2
pagesize information from the header of
the postscript file.
ptncpost_dbf Manufacturing Enter directory path to NCPost database
file.
punch_axis_points Sheetmetal Yes - Enables the creation of punch axis yes, no no
points in Sheetmetal cuts and punches.
punch_models_directory Sheetmetal Sets path to directory that contains the
punch models.
put_iges_drawing_entity Data Exchange Specifies whether or not to suppress the yes, no yes
output of the IGES drawing entity, #404, to
the IGES file. No - The drawing entity is
not output.
qty_balloon_change_warning Without category Sets the warning style when quantity dialog, message dialog
balloons have changed in a
drawing.Dialog displays the warning in a
dialog box, Message displays the warning
in the message area only.
quick_print_drawing_template Without category Specify the path and name of a drawing
template to be used by the File > Quick
Print command.
quick_print_plotter_config_file Without category Specify the path and name of the default
plotter config file to be used by the File >
Quick Print command.
radial_hole_linear_dim Without category YES - Option for creation of radial hole yes, no no
with a linear dimension will be available.
raster_plot_dpi Printing & Plotting Determines the resolution for plotter 100, 200, 300, 400 100
outputs variables are in dots per inch.
ratio_grid_interval Features Modify grid space in percentage units for 0.05
handle movement.
read_famtab_file_on_retrieve File Storage & No - Ignores filename.ptd. Yes - Creates no, yes no
Retrieval and saves filename.ptd and uses that file
when retrieving the generic.
read_parameters_of_excluded Data Management Allow Pro/ENGINEER designated yes, no no
parameters on excluded objects in
Simplified Representation to be visible in
Model Tree columns.
real_time_rendering_display Model Display Disable realtime rendering. disable, transparent_floor, disable
room_display
recompute_iges_dim_value Data Exchange Indicates whether to recompute yes, no no
associative dimensions upon import of an
IGES file.
ref_scope_copy_color Without category Set the color of backed up references 55
according to RGB values. Enter RGB
values between 0 and 100 separated by
space.
ref_scope_copy_color_change Without category Enable changing colors of backuped no, yes yes
references during selection.
ref_scope_no_pick_to_copy Without category Disable selecting references backuped by no, yes no
references control.
ref_scope_no_pick_to_prohibit Without category Disable selecting references prohibited by no, yes yes
references control.
ref_scope_prohibit_color Without category Set the color of prohibited references 45
according to RGB values. Enter RGB
values between 0 and 100 separated by
space.
ref_scope_prohibit_color_change Without category Enable changing colors of prohibited no, yes yes
references during selection.

regen_backup_directory Environment Specifies the directory in which the system
stores regen_backup models. (See
regen_backup_using_disk.) The primary
default is the current directory, but if that
directory is read-only, the secondary
default is the /tmp directory.
regen_backup_using_disk Environment Specifies whether or not the system backs yes, no no
up the current model to disk before each
regeneration.
regen_failure_handling Without category Specifies whether to enter resolve mode resolve_mode, no_resolve_mode
when regeneration failures no_resolve_mode
occur.Resolve_mode - Enter resolve mode
when regeneration failures occur.
No_resolve_mode - Don't enter resolve
mode when regeneration failures occur.
Ask_user - Let the user decide whether to
enter resolve mode or not when
regeneration failures occur.
regen_int_mdls_on_retr Without category Yes to regen models intersected with yes, no no
assem feats during assembly retrieval.
regen_layout_w_assem Assembly Specifies whether or not the layout will be yes, no yes
automatically regenerated upon assembly
regeneration.
regen_simp_retrieve File Storage & Regenerate the assembly when retrieving yes, no no
Retrieval an assembly simplified representation. Yes
- Regenerates the assembly on
retreival.No - The assembly is not
regenerated on retrieval.
regenerate_read_only_objects Data Management Determines whether an object retrieved yes, no yes
from PDM database with read only status
can be regenerated in a Pro/ENGINEER
session.
relation_file_editor User Interface Sets the editor used to edit relations. protab, editor editor

relation_text_trail_output Miscellaneous No - Disable trail output from Text layout in yes, no yes
Relation Parameter UI if it hasn't been
changed.
relation_tool_mapkey_behavior Miscellaneous Will control how mapkeys will be executed increment, full_output increment
in relation tool / dialog.Incremental will
add/remove text incrementally to the
current set.Full_output will record the
original set state and replace the current
one with it. Note: this config is dependent
on relation_text_trail_output.
relations_num_const_units Without category Specifies whether diagnostic should be yes, no no
issued when an unitless numeric value
causes relation expression evaluation
trouble.
relations_units_sensitive Without category Set the default unit sensitivity (ignore or yes, no yes
take into account parameter/dimensions
units) in creation of new relation data
(legacy relation data will not be unit
sensitive until "converted" to one).
remember_last_attach_type Without category Yes - Sets the default of the ATTACH yes, no yes
TYPE menu of the last options picked.
remember_last_get_point_option Drawing Yes - Sets the default of the GET POINT yes, no no
menu as the last option picked among
Pick Pnt, Vertex and On Entity.
rename_drawings_with_object File Storage & Controls whether the system copies none, part, assem, both none
Retrieval associated drawings automatically with
parts and assemblies.
replace_comp_name_method Assembly Sets the naming convention used when transfer, remove, preserve transfer
replacing components.

replace_comp_notes_method Without category Specify treatment of notes when transfer, remove, preserve transfer
components are replaced. Transfer -
transfer to new component. Remove -
remove the notes. Preserve - save notes
in case component is restored.
replace_history_rule_order Assembly Set the default order of the history disable, 1, 2, 3, 4, 5 3
evaluation rule in the replace operation.
Disable - the evaluation rule will be
disabled by default. Number - set the order
of the rule relative to other evaluation
rules.
replace_interface_rule_order Assembly Set the default order of the interface disable, 1, 2, 3, 4, 5 1
rules.
replace_sameid_rule_order Assembly Set the default order of the same id disable, 1, 2, 3, 4, 5 5
rules.
replace_samename_rule_order Assembly Set the default order of the same name disable, 1, 2, 3, 4, 5 2
rules.
replace_sameparam_rule_order Assembly Set the default order of the same disable, 1, 2, 3, 4, 5 4
parameters evaluation rule in the replace
operation. Disable - the evaluation rule will
be disabled by default. Number - set the
order of the rule relative to other
evaluation rules.

replace_unrelated_automatic Assembly Availability of automatic reference pairing yes, no no
in unrelated replace. No - Automatic
reference pairing is not available. Yes -
Automatic reference pairing is available.
report_end_splice Electromechanical Setup whether the terminal splices of yes, no no
cables are reported.
reserved_menu_space User Interface Reserves space for extra menus to the 1
right of the Pro/ENGINEER window (0.0-
4.0). This option overrides windows_scale.
restricted_gtol_dialog Dimensions & Determines whether the Geometric yes, no yes
Tolerances Tolerance dialog restricts the user by
graying out elements that are considered
"illegal".
restricted_val_definition Without category Specify name and path of the file
contained restricted values definition.
retain_display_memory File Storage & Determines if the display of an object yes, no yes
Retrieval currently on the screen is kept in memory
when you quit the window. Doing so (yes)
makes the retrieval of objects in memory
faster.
retrieve_data_sharing_ref_parts File Storage & Automatic reference parts retrieval for yes, no, ignore_missing no
Retrieval dependent data sharing features.
retrieve_display Without category Controls whether or not graphics data is background background
loaded in the background. foreground
retrieve_instance_dependencies Assembly Determines whether to retrieve the instance_deps_only, instance_req_generic
dependencies of the generic when an instance_and_generic_deps,
instance is retrieved. instance_req_generic
retrieve_merge_ref_parts Without category Automatic reference parts retrieval for yes, no, ignore_missing no
dependent Merge.
reverse_spiral_finish_type Without category If the option value is 1, the tool path is
obtained from standard one by reversing
it; if the option value is 2, the tool path
starts from an inner circle.
ribbon_cable_flat_direction Electromechanical Flat ribbon cables in the y-axis of entry y_axis, x_axis y_axis
ports.
right_mouse_button_popup User Interface Specify whether or not the right mouse yes, no yes
button pop up menu is available or not.
room_rotation_lock Photorender Default room rotation setting at session studio, model studio
start.studio - Lock room rotation to
studio.model - Lock room rotation to
model.
rotate_postscript_print Printing & Plotting Specifies rotation for printing. Yes - yes, no
Rotates a PostScript plot 90 degrees
counterclockwise. Use when you are
plotting a landscape drawing on a portrait-
type laser printer, or a portrait drawing on
a landscape-type laser printer.
round_displayed_dim_values Dimensions & No - newly created or first shown yes, no yes
Tolerances dimension is displayed with all its
significant decimals."Rounded Dimension
Value" Check Box will be unchecked while
opening Dimension Properties Dialog. Yes
- number of decimals is rounded according
to default dec places option."Rounded
Dimension Value" Check Box will be
checked while openingDimension
Properties Dialog.
rv_current_object Assembly Will control default option when setting a component, model, component
model or component as the current object. component + model
rv_search_scope Assembly Sets the search scope for children when session, window session
entering the reference viewer. Session -
Search all objects in session. Window -
Search objects in the active window only.

save_bitmap Data Management When performing a save on a model, none, toplevelonly, alllevels none
determines what level of the assembly will
have bitmap images created of modified
components.
save_bitmap_type Data Management When performing a save on a model, bmp, tiff, gif, cgm, jpeg bmp
determines the type of image file that is
created for that model. Used with
"save_bitmap" option.
save_clipped_view File Storage & Yes - clipping status is saved with model. yes, no no
Retrieval No - clipping status is not saved.
save_dialog_for_existing_models File Storage & Controls whether the Save dialog is shown yes, no yes
Retrieval for models whose storage location is
already known.
save_display Drawing Yes - Stores view geometry and detail no, yes no
items such as solid dimensions. These
items are displayed when retrieving the
drawing in View-Only mode.
save_display_status_in_submodel Layers If set to no, the top level assembly will yes, no yes
store sub model layer display status,
allowing lower level display status to be
stored without having to save the sub
models.
save_drawing_picture_file Drawing Embed - Embeds a picture file inside a no, export, embed, both embed
drawing for preview purposes. Export -
Saves a drawing file as a picture file in the
working directory when saving a drawing.
Both - Does both embed and export.
save_hidden_items_w_status Without category The items on the "Hidden Items" yes, no yes
temporary layer are stored permanently
when layer display status is saved with
Save Status command.

save_instance_accelerator File Storage & With family tables of solid parts, none, explicit, always, saved_objects
Retrieval determines saving instance accelerators. saved_objects
None - Accelerator files not used. Explicit -
Save when instance is explicitly saved.
Saved objects - Save when objects were
modified. Always - Always save.
save_model_display File Storage & Sets amount of graphical data stored. shading_lod shading_lod
Retrieval Wireframe - Wireframe data. Shading_high wireframe
- Most detail (shaded). Shading_low - shading_low
Least detail (shaded). Shading_lod - Detail shading_high
determined by ViewPerformance dialog
(shaded).
save_modified_draw_models_only Drawing Determines whether the system saves the no, yes yes
model after you have changed it. No -
Saves the model every time that you store
the drawing.
save_object_in_current File Storage & Use with the override_store_back option. yes, no no
Retrieval Yes - Objects retrieved from a directory
where you do not have write permission
will be stored in the current directory. No -
These objects are not saved at all.
save_objects File Storage & Determines when an object and its all, changed, changed_and_specifie
Retrieval dependent objects (such as a part used in changed_and_specified, d
an assembly) are stored. changed_and_updated
save_scene_with_file Photorender Yes - Automatically update the model with yes, no no
current scene information when saving the
model; No - Scene information embedded
in model must be updated manually.
save_texture_with_model Photorender Yes - Embed applied texture and yes, no no
tracesketch bitmap files into the model file.
save_triangles_flag Model Display Spinning shaded images with software no, yes no
graphics only.Note: This option has no
effect if your system uses hardware
graphics.

save_unchanged_pdm_object Data Management Determines how to save in the current as_ref, as_copy as_ref
working directory an object fetched from a
Pro/PDM database into a Pro/ENGINEER
session.
saveunders_enabled System Yes - Enables Pro/ENGINEER popup yes, no yes
helptext and menus to retain the portion of
the window they obscure to be used to
restore the window image when they are
dismissed.
scope_invalid_refs Without category Prohibit - System will abort all attempts to copy, prohibit copy
create external reference violating the
scope. Backup - Warning appears. Abort
reference creation or declare as out-of-
scope reference. If you declare, backup
copies to part/assembly and backup is
referenced.
search_not_retrieved_models Assembly Expands search to include models that yes, no yes
have not been retrieved into session. If
Yes, models will be brought into session
possibly causing performance issues.
search_path File Storage & Specifies list of directories to search (in
Retrieval order) for object/file retrieval. These
directories, the working directory, and
directories in search.pro file (refer to
search_path_file) are Pro/ENGINEER's
search path. Use full path name to avoid
problems.
search_path_file File Storage & Specifies path to text file search.pro (a list
Retrieval of directory path names). The directories
listed in search.pro, the working directory,
and directories specified by search_path
are Pro/ENGINEER's search path. Use full

section_color Sketcher Specifies the color of sketched sections. default, sketch_color,
drawing_color
sel_insts_on_comp_retrieval Assembly Yes - If the components used in the yes, no no
assembly instances are themselves
generics, the systems asks if you want to
choose an instance as each component is
retrieved. No - The generic model of the
component is retrieved automatically.
select_hidden_edges_in_dwg Drawing Controls selectability of hidden edges in yes, no yes
no-hidden drawing views.
select_on_dtm_edges Environment All_modes - Select a datum plane by all_modes, sketcher_only all_modes
clicking on its visual boundary.
Sketcher_only - Select a datum plane by
clicking on its tag in modes other than
Sketcher. If you use Query frequently, set
this option to Sketcher_only.
selection_of_removed_entities Drawing Yes - Entities in front of cross-section yes, no no
(planar or offset) can be selected, clipped
(using Z-clipping), or erased with EDGE
DISP menu. No - Geometry, datum points
or curves, cosmetic features, threads,
grooves, or coordinate systems cannot be
erased.
set_menu_width User Interface Determines width of menu manager -1
panels. Default value is equivalent to 8
character widths. Acceptable range is from
8 to 20. Values lower than 8 and higher
than 20 are ignored.
set_model_types_to_save File Storage & Determines which model types are used in asm
Retrieval the Save Changed command. The format
is a list of extensions separated by
spaces.
set_trail_single_step System Yes - Enables a trail file to be single- yes, no no
stepped by entering .

shade_mfg_ref_models Manufacturing No - Does not process reference parts no, yes yes
when generating the shaded image (to
save time). Yes - Shades reference parts
when generating shaded images.
shade_moving_comp Model Display Yes - Shades assembly components while yes, no yes
they are being moved. No - Displays
components in wireframe while they are
being moved.
shade_surface_feat Model Display Controls the shading of surface features. yes, no yes
shade_windows Model Display Enables shading of objects in all windows. all_windows, one_window all_windows
This option does not also enable color
shading.
shade_with Model Display Controls the display of datum curves on curves, no curves
shaded objects.
shaded_postscript_background Printing & Plotting Specifies how background colors are yes, no no
handled in Postscript files of shaded
objects.
show_all_mold_layout_buttons Casting & Mold Design Sets all mold layout buttons visible. yes, no no
show_annotations_dialog_limit Drawing Default value for annotations dialog
show_axes_for_extr_arcs Model Display Determines if axes are created for newly yes, no no
extruded arcs.
show_cav_fit_loc_sys Miscellaneous Allows the printing of the transformation yes, no no
matrix of a Pro/Verify Fit into a file.
show_description_view_mgr Without category Yes - show a column for Description field yes, no no
for all tabs in view manager.

show_dim_sign Environment No - Dimension values always appear yes, no no
positive. Negative value creates geometry
to opposite side. Yes - Entering negative
value for dim displayed as negative
creates geometry to same side. Dims for
csys and datum point offsets always show
neg/pos value.
show_geom_checks_on_creation Features Yes - The SHOW ERRORS menu appears yes, no no
at the end of feature creation when the
feature being created has Geometry
Checks.
show_preview_default Drawing This option determines the default keep, remove remove
behavior for preview in Show/Erase.
show_selected_item_id Environment Show id of Pro/E and Sketcher geometry no, yes no
in query selection bin, collector and tool
tip.
show_shaded_edges Model Display Controls the edge color when shading. no, yes no
Yes - Edges are displayed in darker color
than the surfaces to which they belong. No
- Edges are displayed in the same color as
the surfaces to which they belong.
shrinkage_value_display Casting & Mold Design Determines how dimensions are displayed final_value, percent_shrink percent_shrink
when shrinkage is applied to a model with
Pro/MOLDESIGN. Percent_shrink -
Dimensions appear with the shrinkage
percent.
shrinkwrap_alert Assembly Displays the Shrinkwrap alert the first time yes, no yes
the quality level is increased.
shrinkwrap_skip_geom_validation Without category Allows creation of Shrinkwraps from yes, no no
problematic geometry. Downstream
referencing of Shrinkwrap geometry could
cause issues asShrinkwrap may contain
"Geometry checks".

sim_additive_mass Without category Treats Mass Idealizations as additive if yes, no no
they are applied to the same entity and
suppresses Mass precedence rules.
sim_agem_edge_by_crv_default Without category Sets the default value for the ratio of Edge 2
Length / Radius of curvature.
sim_agem_edge_crv Without category Sets the value for the target ratio of Edge 0
Length / Radius of curvaturefor automatic
creation of a global AutoGEM Control.
sim_agem_model_thickness Without category Set the value to the part thickness. This -1
causes AutoGEM to perform more
boundary refinement, and can be very
useful for thinner parts.
sim_auto_map_max_angle Without category Sets the default maximum angle tolerance 10
for auto-mapping of pressure load. The
valid range is from 0 to 90 degrees.
sim_auto_map_max_dist Without category Sets the default maximum distance 0.0012
tolerance (relative to model size) for auto-
mapping of pressure load. The default
value is 0.0012.
sim_auto_pairing_thickness Without category Set the value of characteristic thickness for 0
auto-detection of shell pairs. Using this as
a threshold value, auto-detection will find
surface pairs with thickness smaller than
this value.
sim_auto_regen_enabled Without category Yes - Regenerate model on entrance to yes, no yes
Mechanica. No - Don't regenerate the
model.
sim_beamsection_path Without category Specifies the path where the Beam
Sections will be stored.
sim_calculate_node_reaction Without category Enables node reaction calculations for yes, no no
point constraints within links. The default
value is NO.

sim_check_jacobian_corners Without category No - Suppress Jacobian checks at corner yes, no no
nodes (default). ANSYS and Nastran will
check parabolic elements Jacobian at the
integration points only and FEM will fix too
curved elements for the same criterion.
Yes - Jacobian is checked both at
integration points and corner nodes. FEM
mode will fix too curved elements
accordingly.
sim_display_agem_controls Without category Toggles display of AutoGEM Controls. yes, no
sim_display_arrow_scale Without category Toggles automatic arrow scaling. yes, no
sim_display_arrow_tail_touching Without category Toggles display of Load arrows to have yes, no
tails or heads touching.
sim_display_beam_releases Without category Toggles display of Beam Release icons. yes, no
sim_display_beam_sections Without category Toggles display of beam section icons. yes, no
sim_display_beams Without category Toggles display of beam icons. no, yes
sim_display_contacts Without category Toggles display of contact icons. no, yes
sim_display_current_csys_triad Without category Toggles display of the current coordinate yes, no
system triad in the lower right corner of the
window.
sim_display_fasteners Without category Toggles display of Fastener icons. yes, no
sim_display_highlight_refs Without category If set to yes, selecting a load/constraint will yes, no
highlight its geometrical references.
sim_display_in_spin Without category Toggles display of simulation objects in yes, no
Dynamic Spin.
sim_display_interfaces Without category Toggles display of structure connection no, yes
icons.
sim_display_internal_mesh_edges Without category Specifies whether internal edges of mesh yes, no no
elements should be displayed in the
wireframe mode. The default is "No".
sim_display_load_colors Without category Toggles display of Load colors. yes, no

sim_display_load_distribution Without category Toggles display of distributed load vectors yes, no
over entire entity.
sim_display_load_icons Without category Toggles display of load icons. yes, no
sim_display_load_name Without category If set to yes, the load/constraint name is yes, no
displayed in the label.
sim_display_load_value Without category Toggles display of Load values. yes, no
sim_display_loads_from_comps Without category Toggles display of loads and constraints yes, no
defined on lower-level components of
assembly.
sim_display_masses Without category Toggles display of mass icons. no, yes
sim_display_matl_assignments Without category Toggles display of Material Assignment yes, no
icons.
sim_display_measures Without category Toggles display of Simulation Measure yes, no
icons.
sim_display_mesh_and_model Without category Toggles display of Mesh together with yes, no
Model.
sim_display_mesh_control_name Without category If set to yes, the Mesh/AutoGEM control yes, no
name is displayed in the label.
sim_display_mesh_control_value Without category If set to yes, the Mesh/AutoGEM control yes, no
value is displayed in the label.
sim_display_mesh_controls Without category Toggles display of Mesh Controls. yes, no
sim_display_mesh_entities Without category Toggles display of Mesh entities. yes, no
sim_display_mesh_mode Without category Specifies the mode of mesh display in no_mesh, wireframe, hidden,
FEM preprocessor. Values: NO_MESH, nohidden, shading
WIREFRAME, HIDDEN, NOHIDDEN,
SHADING.
sim_display_mesh_quality Without category Specifies the quality of mesh display in fine, medium, coarse
Mechanica. Values: FINE, MEDIUM,
COARSE.

sim_display_mesh_shells_thick Without category Toggles the display of shell thickness in no, yes
Mechanica mesh. YES - Display shells
with real thickness. NO - Display shells
with zero thickness.
sim_display_mesh_shrink_elems Without category Controls display of Mesh through a -1
specified percentage of shrinking of its
elements.
sim_display_model_type Without category Toggles the display of the Simulation yes, no yes
model setup in the lower left corner of
Pro/E screen.
sim_display_names Without category Toggles display of Simulation Object yes, no
names.
sim_display_rigid_dof Without category Toggles display of Rigid Link DOF icons. yes, no
sim_display_rigid_links Without category Toggles display of Rigid Link icons. yes, no
sim_display_shell_pairs Without category Toggles display of shells pairs. no, yes
sim_display_shells Without category Toggles display of shell icons. no, yes
sim_display_springs Without category Toggles display of spring icons. no, yes
sim_display_struct_constraints Without category Toggles display of structure constraint yes, no
icons.
sim_display_struct_loads Without category Toggles display of structure load icons. yes, no
sim_display_therm_bcs Without category Toggles display of Thermal Boundary yes, no
Condition icons.
sim_display_therm_loads Without category Toggles display of thermal load icons. yes, no
sim_display_weighted_dof Without category Toggles display of Weighted Link DOF yes, no
icons.
sim_display_weighted_links Without category Toggles display of Weighted Link icons. yes, no
sim_display_welds Without category Toggles display of Weld icons. yes, no
sim_display_z_buffered Without category Toggles z-buffered display of Mechanica yes, no
icons.

sim_expanded_diagnostics Without category Yes - Mechanica will perform an expanded yes, no no
set of diagnostic checks during meshing a
model or running an analysis. These
include checks for interferences in an
assembly and for singular geometry. No -
Mechanica will not perform expanded
checks.
sim_extend_surf_max_angle Without category Controls the maximum angle between a 30
surface to be extended during shell
compression and its adjacent surfaces. If
the angle is higher than specified, the
adjacent surfaces will be extended. The
default is 30 degrees. The range is from 0
to 90 degrees.
sim_fatigue_biaxiality_correct Without category Controls the use of biaxiality correction. yes, no yes
The default value is YES.
sim_fatigue_biaxiality_method Without category Controls which method is used to model worst, ktc, hs worst
biaxiality: Klann-Tipton-Cordes, Hoffman-
Seeger, or the most conservative (worst)
of the two methods. The default value is
WORST.
sim_fatigue_confidence_level Without category Specifies the percentage confidence in the 90
predicted life result value. The default
value is 90, and range is from 0.1 to 99.9
sim_fatigue_external_matdata Without category Controls the use of external material data. no, yes no
The default value is NO.
sim_fatigue_hysteresis_gate Without category Specifies the gate applied to cycle 1
counting as a percentage of peak load.
The default value is 1 and range is from 0
to 50.
sim_fatigue_infinite_life_value Without category Specifies the value for the lives beyond 1E+20
cutoff. The default value is 1e20 and range
is from 1e15 to 1e30.

sim_fatigue_mean_stress Without category Controls the application of the mean stress yes, no yes
correction. The default value is YES.
sim_fatigue_mean_stress_method Without category Controls which method is used to model worst, swt, morrow worst
mean stress: the Smith-Watson-Topper
Approach, Morrow Correction, or the most
conservative (worst) of the two methods.
The default value is WORST.
sim_fatigue_safety_margin Without category Specifies a factor used to determine the 3
Life Confidence quantity. The default value
is 3 and range is from 1.1 to 100.
sim_fatigue_user_directory Without category Specifies the directory for user files (for
example, external material files). The
default value is the current directory.
sim_fatigue_write_surf_stress Without category Controls writing of surface stresses to a no, yes no
neutral file. The default value is NO.
sim_fem_nastran_use_pshell Without category Yes - use PSHELL cards, No - use yes, no no
PCOMP cards for laminate composite
shells in NASTRAN output file.
sim_html_report_prefs_file Without category Specifies the path to the Simulation post
processor HTML report preferences file.
sim_hyperelastic_material_fit Without category Sets the default method for calculating normalized, non-normalized normalized
coefficients for hyperelastic materials. If
set to "normalized", normalized stresses
will be used. If set to "non-normalized",
non-normalized stresses will be used.)
sim_icon_distribution_density Without category Determines how many icons are drawn for -1
a distribution. 1 is fewer, 10 is the highest.
sim_ignore_unpaired Without category Yes - Unpaired surfaces are ignored when yes, no no
meshing the model, placing you directly
into the AFTER COMP menu (the CONT
MESH menu is skipped).

sim_invoke_diagnostics_on_run Without category Sets the default for the display of yes, no, prompt prompt
diagnostics during the run of an analysis in
Mechanica Native mode. If set to prompt,
the user is prompted to rundiagnostics
every time he/she starts a run.
sim_load_mech_mesh Without category No - The user is prompted to load the no, yes no
existing Mechanica mesh file from the
current working directory. Yes - The mesh
file, if exists, is loaded automatically and
the mesh is displayed.
sim_loadpreview Without category Sets the type of load preview: vectors, vectors, fringe, mesh fringe
fringe or mesh.
sim_mat_poissons_notation Without category Specifies the convention used for defining tsai, jones tsai
Poisson's ratio for anisotropic materials as
being either Tsai (Column-normalized) or
Jones (Row-normalized). This option
affects only the labels for Poisson's ratio
on the Material data form.
sim_max_contact_iterations Without category Specify the maximum number of iterations 200
for contact analysis. The default is 200.
sim_max_memory_usage Without category Specifies the maximum amount of memory
in megabytes to be allocated during FEM
meshing. If this option is not set, or set to
zero, the mesher can use all available
memory.
sim_nastran_use_coupmass Without category Add PARAM,COUPMASS,1 in the Nastran yes, no no
deck file to enforce consistent mass matrix
generation.
sim_output_ids_for_layers Without category Outputs FEM mesh element IDs on each yes, no no
layer into XML file.
sim_output_obj_names Without category Output Beam Sections names, Analyses yes, no no
names, Coordinate Systems names as
comments.

sim_pp_background_color Without category Specifies the background color of the work proe, blue, black, white proe
area for the results display. The default
value is PROE.
sim_pp_display_beam_thickness Without category Sets the thickness for beams and 2D- actual, 1, 2, 3, 4, 5 5
shells display in Post Processor.
Numerical values specify the thickness in
pixels.
sim_pp_display_spin_center Without category Sets the default for the behavior of mouse yes, no yes
spinning the model in results.
sim_pp_legacy_selection Without category Enable legacy selection of geometrical no, yes no
entities from Mechanica postprocessor on
Mechanica geometry.
sim_pp_legend_continuous Without category Determines if the legend will be yes, no no
continuous tone (YES) or discrete colors
(NO).
sim_pp_legend_levels Without category The default number of legend levels (from 9
1 to 16; the default is 9).
sim_pp_legend_show Without category If set to NO, the legend is not displayed in yes, no yes
newly created results windows by default.
sim_pp_legend_show_min_max Without category If set to NO, the gray minimum and yes, no yes
maximum values are not displayed by
default in the legend.
sim_pp_legend_spectrum Without category This string sets the default color legend
used in the definition of a results window.
This file will be looked up in the
sim_pp_template_dir location, or, if this is
not specified, in the current working
directory.
sim_pp_path_absolute Without category Choose Absolute (Yes) or Relative (No) yes, no no
path to "rwd" file.
sim_pp_query_location Without category Sets the default value for the display of the yes, no no
WCS location in dynamic query in results.

sim_pp_template_dir Without category Sets the default directory for results
template files.
sim_pp_vector_plot_arrow_2d Without category To draw 2D arrows instead of 3D arrows yes, no no
while post-processing vector results. It is
useful when system memory is not
sufficient to display3D vector arrows.
sim_pp_vrml_export_format Without category Flags to denote VRML1.0 or VRML2.0 vrml2.0, vrml1.0 vrml2.0
(default) output.
sim_pp_vrml_feature_edges Without category Flag to enable the inclusion of feature no, yes no
edges in the VRML file. The default value
is NO.
sim_reentrant_geom_angle Without category Sets the default value for reentrant 120
geometry detection in both Isolation for
Exclusion AutoGEM Control and
expanded diagnostics checks. The valid
range is from 0 to 180 degrees. The
default is 120 degrees.
sim_remove_unopposed Without category Yes - The system ignores unopposed yes, no no
surfaces when meshing the model; the
system also deselects the UseUnopposed
option. No - the system uses the
unopposed surfaces in the shell model.
sim_run_copy_fem_neutral_file Without category Controls whether the FEM neutral file (with yes, no yes
extension .fnf) is copied into the study
directory. The default value is YES.
sim_run_num_threads Without category Controls the number of CPUs that all, all_but_1, all_but_2, 2, 1, all
Mechanica Native mode will use for half
running the analysis. The possible values
are: ALL (default), ALL_BUT_1,
ALL_BUT_2, 2, 1, HALF.
sim_run_out_dir Without category Specifies the directory for Mechanica run
output storage. By default, the current
directory is used.

sim_run_tmp_dir Without category Specifies the directory for Mechanica run
temporary storage. By default, the current
directory is used.
sim_smooth_aspect_ratio Without category Sets the element aspect ratio criterion for 7
the mesh smoothing process.
sim_smooth_edge_angle Without category Sets the element edge angle criterion 30
(Quad elements only), measured in
degrees, for the mesh smoothing process.
sim_smooth_skew Without category Sets the element skew angle criterion 45
sim_smooth_taper Without category Sets the element taper criterion (Quad 0.5
elements only) for the mesh smoothing
process.
sim_smooth_warp_angle Without category Sets the element warp angle criterion 10
sim_solver_memory_allocation Without category Specifies the amount of memory in 128
megabytes reserved for solving equations
and for storing element data created by
the iterative solver. The default value is
128.
sim_spotweld_split_mesh Without category If set to YES (default), the elements that yes, no yes
touch the end of the spot weld are created
in a circle the same diameter as the weld
(AutoGEM only).
sim_struct_interface_default Without category Sets the default for the interfaces created bonded, free, contact
between the geometry in a structural
model for meshing and running analysis.
sim_therm_interface_default Without category Sets the default for the interfaces created bonded, adiabatic, resistance
between the geometry in a thermal model
for meshing and running analysis.

sim_use_layers Without category Allows layers to become groups for no, yes no
Mechanica Independent mode.
simprep_default_model_status Assembly Determines the default model status while exclude, master, graphics, exclude
defining a new simplified rep. geometry
simprep_ondemand_activation Without category Enables retrieving on-demand the Master yes, no yes
rep ofan activated model. When an
assembly is activatedthe Assembly only
rep is retrieved.
simprep_ondemand_cleanup Without category Determines if a model retrieved on disable, remove, remove
demandshould be removed or remove_and_erase
erased.Disabled - the model will not be
removedand will remain in the
assembly.Removed - the model will be
removed. Remove_Erase - The model will
be removedand erased from memory.
simprep_ondemand_editing Without category Enables on demand retrieval of an edited disable, master, automatic, automatic
item and its parent master_with_ancestors
references.Configuration tools (Family
Tables, Relations, etc) will retrieverequired
models accordingly.Automatic - Retrieves
the minimum rep required to perform the
operation.
simprep_ondemand_regeneration Without category Enables on demand retrieval of automatic, master, disable automatic
requiredmodels during regeneration.Can
affect regeneration performance.
simprep_ondemand_selection Assembly Determines the rep to be retrieved when automatic, master, disable automatic
selecting a reference. AutomaticRetrieves
the minimum rep required to perform the
operation.

simprep_ondemand_settings Assembly Determines on-demand retrieval behavior prompt, never_prompt, never_prompt
in simplified representation views. Prompt disable
- Ask for confirmation before retrieving on-
demand. Never_prompt - Retrieve models
on-demand automatically with no
confirmation. Disabled - on demand is
disabled.
simulation_fem_mode Without category Yes - Activates FEM mode. No - Allows yes, no, prompt prompt
access to Mechanica only. Prompt
(default) - Brings Mechanica Model Type
Dialog. This option is used only if
information about FEM mode is not yet
stored with model.
simulation_process_auto_advance Without category If set to yes the Process Guide will yes, no no
advance to the next set automatically upon
completion of the current step.
simulation_process_prompt Without category If set to yes, the Process Guide will be yes, no no
launched automatically upon entry into
Mechanica, if template files are present.
simulation_process_template_dir Without category Specifies the default location of the
Process Guide template files.
simulation_product Without category Set Mechanica product being selected structure, thermal, prompt prompt
(Structure/Thermal). Prompt (default) -
Brings Mechanica Model Type Dialog. This
option is used only if the information about
Mechanica product is not yet stored with
model.
skeleton_model_default_color Assembly Specifies the color Pro/ENGINEER uses to 0
display new skeleton models. The three
decimal values ranging from 0 through 100
specify (in order) the percentages of red,
green, and blue in the resulting color. For
example, 0 0 49 specifies medium blue.

sket_import_geometry_line_style Sketcher Determine if the original line style and yes, no no
color should be preserved on Copy/Paste,
Sketcher Palette and Import from file. Yes
- Preserve original line style and color.
sketcher_animated_modify Sketcher No - The section is not animated as yes, no yes
modifications are regenerated.
sketcher_auto_create_refs Sketcher The option values are: 2: the system 1, 2 2
automatically creates 2 dimensioning
references; 1: the system automatically
adds the orientation reference as a
dimensioning reference; 0: the system
does not automatically create
dimensioning references.
sketcher_blended_background Sketcher This option controls whether the blended no, yes no
background should be used in 3D
Sketcher.The option has no effect if
blended background is turned off
generally.
sketcher_collinear_constr Sketcher Yes - collinear constraints will be used by no, yes yes
Intent Manager; No - collinear constraints
will not be used by Intent Manager.
sketcher_default_font_kerning Sketcher Automatically set kerning for text entities in yes, no no
Sketcher. Yes - Kerning will be set for new
text entities. No- Kerning will not be set
automatically.
sketcher_dim_of_revolve_axis Sketcher If this option is set all dimensions created no, yes no
by Intent Manager to Axis of Revolution
will be diameter dimensions.
sketcher_dimension_autolock Sketcher Automatically lock strong sketcher no, yes no
dimensions.
sketcher_disp_constraints Sketcher Shows the constraints when sketching in yes, no yes
Sketcher Mode; for example, H for
horizontal, V for vertical, and so on.

sketcher_disp_dimensions Sketcher No - Suppresses the display of all yes, no yes
dimensions while in sketcher.
sketcher_disp_grid Sketcher Specify whether or not to display the yes, no no
sketcher grid.
sketcher_disp_vertices Sketcher No - Suppresses the display of yellow yes, no yes
points on all vertices while in sketcher.
sketcher_disp_weak_dimensions Sketcher Yes - weak dimensions will be displayed; yes, no yes
No - weak dimensions will not be
displayed.
sketcher_equal_length_constr Sketcher Yes - equal length constraints will be used no, yes yes
by Intent Manager; No - equal length
constraints will not be used by Intent
Manager.
sketcher_equal_radii_constr Sketcher Yes - equal radii constraints will be used no, yes yes
by Intent Manager; No - equal radii
Manager.
sketcher_grid_angle Sketcher Enter a grid angle value to override the 0
default grid angle value.
sketcher_import_exact_geom Sketcher During import in sketcher use exact yes, no yes
geometry.
sketcher_lineup_hor_constr Sketcher Yes - line up horizontal constraints will be no, yes yes
used by Intent Manager; No - line up
horizontal constraints will not be used by
Intent Manager.
sketcher_lineup_ver_constr Sketcher Yes - line up vertical constraints will be no, yes yes
used by Intent Manager; No - line up
vertical constraints will not be used by
Intent Manager.
sketcher_lock_modified_dims Sketcher Yes - modified dimensions will be locked; yes, no no
No - modified dimensions will not be
locked.

sketcher_midpoint_constr Sketcher Yes - midpoint constraints will be used by no, yes yes
Intent Manager; No - midpoint constraints
sketcher_palette_path Sketcher Sets the default directory for the user
sketcher shape library. Use the full path
name to avoid problems.
sketcher_parallel_constr Sketcher Yes - parallel constraints will be used by no, yes yes
Intent Manager; No - parallel constraints
sketcher_perpendicular_constr Sketcher Yes - perpendicular constraints will be no, yes yes
used by Intent Manager; No -
perpendicular constraints will not be used
by Intent Manager.
sketcher_point_on_entity_constr Sketcher Yes - point on entity constraints will be no, yes yes
used by Intent Manager; No - point on
entity constraints will not be used by Intent
Manager.
sketcher_refit_after_dim_modify Sketcher Refits section after dimension modification yes, no yes
in 2D section or when creating the first
feature.
sketcher_rel_accuracy Sketcher Enter a sketcher relative accuracy. -1
sketcher_same_point_constr Sketcher Yes - same points constraints will be used no, yes yes
by Intent Manager; No - same points
Manager.
sketcher_save_preview_image Sketcher This option controls whether section files no, yes no
should be saved with embedded image
information which can be used to preview
sections in File/Open dialog.
sketcher_set_grid_method Sketcher "Automatic" - grid spacing will be automatic, manual automatic
automatically set, "Manual" - grid spacing
will be manually set.

sketcher_set_grid_x_spacing Sketcher Enter an x-grid spacing value to override 1
the default x-grid spacing value.
sketcher_set_grid_y_spacing Sketcher Enter a y-grid spacing value to override 1
the default y-grid spacing value.
sketcher_starts_in_2d Sketcher Defines initial model orientation in yes, no yes
Sketcher mode. Yes - (2D orientation)
Looking directly at section (sketching)
plane. No - (Orientation unchanged)
Sketch directly on the 3D part.
sketcher_strngthn_to_def_dec_pl Without category This option enable the user to keep a yes, no yes
highly precise value during creation or
convertion strong dimension.
sketcher_symmetric_constr Sketcher Yes - symmetric constraints will be used no, yes yes
by Intent Manager; No - symmetric
Manager.
sketcher_tangent_constr Sketcher Yes - tangent constraints will be used by no, yes yes
Intent Manager; No - tangent constraints
sketcher_undo_reorient_view Sketcher Controls the ability to Undo view no, yes no
reorientation while in Sketcher. Yes - it is
possible to Undo view reorientation in
Sketcher.
sketcher_undo_stack_limit Sketcher Sketcher saves a copy of each function 200
performed. The number of possible saved
functions depend on the number specified
in the option. The undo menu can be used
to remove the stored functions.
skip_small_surfaces Model Display Gives the user the option not to display no, yes yes
small shaded surfaces. Disabling this
option will improve display quality at the
expense of speed.It is most useful for
creating screen snap shots.

smooth_lines Model Display Choose whether to smooth lines by default no, yes no
or not.
smt_allow_flip_sketch Sheetmetal Yes - Allows flipping the sketch in Flat and yes, no no
Flange tools. No- Disables the ability to flip
the sketch in Flat and Flange tools.
smt_bend_notes_dflt_display Sheetmetal Define the default state of Bend Note yes, no yes
display (sheetmetal Mode)
smt_bend_notes_direction_down Sheetmetal Define the Down Direction symbol for default
Bend Notes (sheetmetal Mode)
smt_bend_notes_direction_up Sheetmetal Define the Up Direction symbol for Bend default
Notes (sheetmetal Mode)
smt_bend_notes_order Sheetmetal Define the Fields Order for Bend Notes &type&direction&angle
(sheetmetal Mode)
smt_bend_notes_type_formed Sheetmetal Define the Formed symbol for Bend Notes default
(sheetmetal Mode)
smt_bend_notes_type_rolled Sheetmetal Define the Rolled symbol for Bend Notes default
(sheetmetal Mode)
smt_crn_rel_display Sheetmetal Yes - Corner relief notes will be displayed. no, yes yes
No - Corner relief notes will not be
displayed.
smt_form_abort_on_fail_plc Sheetmetal Yes - will always fail the Sheetmetal Form yes, no no
feature if there is a problem with its
placement .
smt_mp_method Sheetmetal MASS - Suppressed Flat Pattern and mass, cg, both cg
Flatten Forms will be temporary resumed
before mass properties calculation of
sheetmetal part. CG - Mass Properties
calculation will be performed on current
state of sheetmetal part.BOTH - Both
methods will be used one after the other.

smt_outside_mold_lines Sheetmetal Yes - Outside Mold Lines will be created yes, no no
during Flat Pattern creation.
snap_single_constraints Without category When dynamically dragging components yes, no yes

during component placement, allow to
snap to references one constraint at a
time.
spherical_map_size Model Display Size of Spherical map texture image used 256x256, 512x512, 256x256
for environment mapping. Bigger size will 1024x1024
have better image quality but will be slow
to regenerate.
spin_center_display Environment Determines whether or not the spin center yes, no yes
symbol displays.
spin_rate_zoom_sensitive Model Display Allows slower spinning when zoomed in yes, no no
on a model.
spin_with_notes Model Display Yes - 3D feature and model notes are yes, no yes
displayed during dynamic spinning of a
model.
spin_with_orientation_center Without category Display orientation center while yes, no yes
reorienting.
spin_with_part_entities Model Display Yes - Datum features will be displayed yes, no no
during dynamic spinning of a model.
spin_with_silhouettes Model Display Yes - Silhouette lines will be displayed no, yes no
during dynamic spinning of a model.
start_appmgr Environment Determines whether or not the application yes, no yes
manager starts when Pro/ENGINEER is
started.
start_model_dir File Storage & Provides the complete path to the
Retrieval directory containing start parts and
assemblies.

std_nastran_template Without category Sets the file path of a NASTRAN deck
template. Use full path to avoid problems.
step_appearance_layers_groups Data Exchange No - Output of Appearances, Layers, and yes, no no
Groups is enabled for STEP standard
AP214. Yes - Output of Appearances,
Layers, and Groups is enabled for STEP
standard AP203.
step_export_ap214_asm_def_mode Data Exchange Toggles the default setting of the File single_file, single_file
Structure field in the STEP Export dialog separate_parts_only,
box for supported assembly STEP export separate_all_objects
files.
step_export_dwg_views Data Exchange AS_3D_VIEWS - Export 3-D model no, as_3d_views, no
geometry with its associative views. as_3d_views_assoc_draft
AS_3D_VIEWS_ASSOC_DRAFT - Export
3-D model geometry with its associative
views and view related annotations. NO -
Export only 2-D representations of the 3-D
models. This is the default.
step_export_format Data Exchange Specifies output format when exporting to ap203_is ap203_is
STEP. AP203_IS - Formats output to ISO ap214_cd
10303 AP203IS format. AP214_CD - ap202_is
Formats output with geometry that meets 203_is_ext
the specification for the long-term schema ap214_dis
for AP214cc1. ap209_dis
ap214_is
store_tool_path_file Manufacturing Specifies how tool path information is yes, no yes
computed. Yes - Tool path information
stored in file filename.tph (filename is
manufacturing model name). No - Tool
path is computed each time manufacturing
model is retrieved or parameters are
changed.
style_auto_regen_curves Without category Yes - Enable auto regeneration of curves. yes, no yes

style_auto_regen_shaded_surface Without category Yes - Enable auto regeneration of shaded yes, no yes
surfaces.
style_auto_regen_surface Without category Yes - Enable auto regeneration of yes, no yes
surfaces.
style_connection_arrow_scale Without category Set scale factor of surface connection 1
arrow. Number should be greater then 0.
style_default_connections Without category Yes - Add connections to a newly created yes, no yes
Style surface.
style_display_grid Without category Yes - Display grid for active datum plane. yes, no yes
style_grid_spacing Without category Set the number of lines to display on grid. 5
Number should be equal or greater than 2.
style_state_transparency Without category Set the value of transparency for 70
components set to "Transparent" in style
state.Value must be between 0 and 100.
style_surface_mesh_display Without category On - Display surfaces mesh. Off - Do not off, on, off when shaded off
display surfaces mesh. Off When Shaded -
Display surfaces mesh except when
shaded.
style_surface_mesh_quality Without category Sets the quality of the surface mesh. 1
Values range is between 0.1 to 10.
summary_help User Interface Refers to the one-line help Messages that yes, no no
are either displayed or not displayed.
suppress_dlg_license_expired User Interface Suppresses "License expired: List of 7
options and expiration days" dialog
suppress_license_loss_dialog User Interface Yes - Suppresses the 'Regained Floating yes, no no
License' dialog box. No - The 'Regained
Floating License' dialog box will display.
switch_dims_for_notes Drawing Yes - Dimensions will be displayed in their yes, no yes
symbolic format during drawing note
creation. No - Dimensions will be
displayed in drawing notes as numerical
values.

sym_leader_orient_move_text Drawing With Pro/DETAIL, automatically regroups yes, no no
weld symbol instances after you move the
text.
symbol_instance_palette_file Drawing Specifies the location of the symbol
instance palette.
symbol_palette_input Drawing Controls the display of the special symbol yes, no yes
palette during note creation.
system_background_color Colors Defines default graphics area background 0
color. The three decimal values specify (in
order) percentage of red, green and blue
in the resulting color. For example, 0 0 49
specifies a medium blue. Change in
session using View>Display
Settings>System Colors.
system_colors_file Colors Specifies the system color file. Use the full
system_curves_color Colors Defines default curve color. The three 0
decimal values specify (in order)
percentage of red, green and blue in the
resulting color. For example, 0 0 49
system_dimmed_menu_color Colors Defines default secondary highlight color. 0
The three decimal values specify (in order)

system_edge_high_color Colors Defines default edge highlight color. The 0
three decimal values specify (in order)
system_geometry_color Colors Defines default color of solid wireframe 0
entities. The three decimal values specify
(in order) percentage of red, green and
blue in the resulting color. For example, 0
0 49 specifies a medium blue. Change in
system_hidden_color Colors Defines default color of hidden, wireframe 0
entities. The three decimal values specify
system_highlight_color Colors Defines default primary highlight color. The 0
system_iges_header_file Data Exchange Inserts specified text file into the Start
section of IGES files (refer to
user_iges_header_file). When used with
user_iges_header_file, the system text
appears first.

system_letter_color Colors Defines default color of datum tags. The 0
system_section_color Colors Defines default section color. The three 0
system_sheetmetal_color Colors Defines default color of Sheetmetal parts. 0
The three decimal values specify (in order)
system_volume_color Colors Defines default color of Manufacturing 0
volumes. The three decimal values specify
tablet_device_name System Specifies the name of a digitizing tablet.
tan_angle_for_disp Model Display For display purposes only. Sets the angle 0.02618
between two quilt surfaces below which
the edge will be displayed as tangent.
Enter an angle between 1.5 and 15
degrees.

tangent_edge_display Model Display Determines how edges between tangent no, solid, centerline, solid
surfaces are displayed. phantom, dimmed
tbl_driven_tol_val_edit Dimensions & Tbl_driven_tol_val_edit Y/N* - "Yes" allows yes, no no
Tolerances users to directly edit the tolerance value of
dimensions whose tolerance values are
driven by tolerance tables. Editing the
tolerance value of a dimension will make
the dimension non-table-driven. "No"
disallows direct editing of the tolerance
values of table driven tolerances.
template_designasm File Storage & Specifies the designated template inlbs_asm_design.asm
Retrieval assembly. Use full path to avoid problems.
template_drawing File Storage & Specify the drawing used as the default c_drawing.drw
Retrieval drawing template.
template_ecadasm File Storage & Specify the model used as the default
Retrieval ECAD assembly template.
template_ecadpart File Storage & Specify the model used as the default
Retrieval ECAD part template.
template_esrasm Without category Specifies the designated template ESR inlbs_asm_esr.asm
assembly. Use full path to avoid problems.
template_flat_harness Electromechanical Specify the model used as the default
flattened Harness assembly template.
template_harnesspart Electromechanical Specify the model used as the default
Harness part template.
template_mfgcast File Storage & Specify the model used as the default inlbs_mfg_cast.asm
Retrieval manufacturing cast template.
template_mfgcmm File Storage & Specify the model used as the default inlbs_mfg_cmm.asm
Retrieval manufacturing cmm template.
template_mfgemo File Storage & Specify the model used as the default inlbs_mfg_emo.asm
Retrieval manufacturing expert machinist template.
template_mfgmold File Storage & Specify the model used as the default inlbs_mfg_mold.asm
Retrieval manufacturing mold template.

template_mfgnc File Storage & Specify the model used as the default inlbs_mfg_nc.asm
Retrieval manufacturing assembly template.
template_mold_layout File Storage & Specify the mold layout assembly used as inlbs_mold_lay.asm
Retrieval a default template.
template_sheetmetalpart File Storage & Specify the model used as the default inlbs_part_sheetmetal.
Retrieval sheetmetal part template. prt
template_solidpart File Storage & Specify the model used as the default part inlbs_part_solid.prt
Retrieval template.
terminal_command User Interface Specifies the full path to the terminal
emulator command (the command that
starts shell windows). Use the command
for your system. Enter the complete path
name and the terminal command.
terminator_table_out_unicode Electromechanical YES - Unicode strings are exported in yes, no yes
terminator table files, NO - Unicode strings
are converted to ASCII characters for
terminator table export.
texture Model Display Yes - Applied textures will be displayed no, yes yes
when the model is shaded.
texture_search_path Model Display Appends a directory to the search path for
textures.
thermo_position_hint User Interface Enables you to position the thermometer- no_window_overlap, window_overlap
type scales whenever they appear, so that window_overlap
they do not overlap the Pro/ENGINEER
windows (if space permits, for example, if
windows have been scaled).
tiff_compression Data Exchange TIFF exports are done without none, g4, packbits, deflate none
compression.
tiff_type Data Exchange Determines the type of tiff items are rgb, palette, grayscale, mono rgb
exported to variables refer to color sets

todays_date_note_format Drawing Controls the initial format of the date %dd-%mmm-%yy
displayed in a drawing. The format for the
setting is a string consisting of three
portions: the year, the month, and the
date. You can enter the portions in any
order.
tol_display Dimensions & Displays dimensions with or without yes, no no
Tolerances tolerances.
tol_mode Dimensions & Sets the tolerance mode of newly created nominal, limits, plusminus, limits
Tolerances dimensions. plusminussym,
plusminussym_super
tol_num_digits_default_driven Drawing Yes - The Default check boxes in the yes, no yes
number of digits area of the Dimension
Properties dialog will be checked when a
dimension is created or first shown. No -
The check boxes will be unchecked when
a dimension is created or first shown.
tolerance_class Dimensions & Sets the default tolerance class for ISO- fine, medium, coarse,
Tolerances standard models. The system uses the very_coarse
tolerance class in conjunction with the
dimension value when retrieving
tolerances for General or Broken Edge
dimensions.
tolerance_standard Dimensions & Sets the tolerance standard used when ansi, iso ansi
Tolerances creating the model.
tolerance_table_dir Dimensions & Sets the default directory for user-defined
Tolerances tolerance tables for ISO-standard models.
All Holes and Shafts tables overwrite
existing tables when loaded.
toolkit_registry_file Application Tells Pro/E the full path to which toolkit
Programming registry file to be used. This option
Interfaces replaces the R17 option prodevdat.

tracesketch Without category Display tracesketches outside of Style no, yes yes
feature
trail_delay System Sets a delay in seconds between trail file
steps.
trail_dir System Instructs Pro/ENGINEER to create its trail
file in the specified directory rather than in
the startup directory.
train_file_path System Specifies the default directory for training
files. The path name must start from the
root of the directory, for example,
/home/users/library/training.
transparency Model Display Yes - Transparent colors will appear as no, yes yes
such when the model is shaded.
travel_bounds_display Without category Enable travel bounds display. yes, no no
travel_bounds_transparency Without category Transparency value for machine bound 0.8
display.
triangulate_filled_areas Drawing Subdivide filled areas into triangles (may yes, no no
affect memory usage and plot files).
troubleshooter_show_info_gcheck Features When set to Yes this option will add a no, yes no
"Show info items" filter to the View panel in
the Troubleshooter.
ttf_handling_for_plot_files Printing & Plotting Defines how annotations using True Type stroke all fonts, use true type use
Fonts are written to the plot file. Use True fonts
Type Fonts will reduce the plot file size,
but font substitution may occur due to
device settings. Annotations that do not
use True Type Fonts are unaffected by
this option.
udf_af_name_postfix Features If set to yes, a sequential number will be yes, no yes
appended to the name of annotation
feature in group from Copy and UDF
placement.

ui_theme Without category Setup Pro/E Theme.Standard will result in wildfire, standard wildfire
the Wildfire Theme on UNIX and "following
the Windows theme on Windows XP &
Win2K. Wildfire - Will always use the
Wildfire Theme regardless of the OS
settings.
units_system_dic_file Piping Specifies the file containing the mapping /devsrc1/spg/system_1
for MCAT filename and units. /text/piping_data/maste
r_catalog/piping_units_
system_dic_file.ptd
update_copy_geom_location Assembly Yes-Copy Geometry will try to update yes, no yes
location of copied geometry based on
changes to component placements even if
some components are excluded or in
graphics rep.
update_harness_mfg_line_color Electromechanical Update cable line color for harness-mfg yes, no no
part created in release 2000i or earlier.
update_pre_130_harness Electromechanical Yes - When a cable is added between two yes, no no
previously laid out locations in a three-
dimensional reference harness, display of
the new cable will update automatically in
pre-Release 13 flattened cable models.
update_pre_16_cable_layers Electromechanical Yes - Harnesses containing cables routed yes, no no
prior to Release 16.0 will be automatically
updated upon retrieval to comply with new
display standards.
update_rep_refs Assembly "Yes" updates top assembly simplified yes, no yes
reps for replacements during regeneration
and upon replacement.
use_8_plotter_pens Printing & Plotting Specifies whether to support up to 8 no, yes no
plotter pens. The initial default is 4 pens.

use_export_2d_dialog Data Exchange Yes - Opens export options dialog when yes, no yes
exporting Pro/E drawing. No - exports file
without the options dialog.
use_iges_font_1003 Data Exchange Used to disable the use of IGES font 1003. yes, no yes
use_iges_kanji_font_2001 Data Exchange Specifies whether to convert Kanji notes in yes, no no
Pro/ENGINEER to IGES Kanji notes (font
code) when exporting. Yes - Converts
Kanji notes to IGES Kanji notes. No -
Converts using Font 1.
use_major_units Dimensions & Determines if fractional dimensions are yes, no no
Tolerances displayed in terms of feet-inches or meter-
mm. Yes - The major units are used. For
example, when the units are inches and
25.125 is converted to a fraction, the
dimension becomes 2' 1-1/8".
use_master_for_bad_disp_reps Without category Yes to retrieve master rep when graphics yes, no no
rep has no display data.
use_nom_dim_val_in_expr Dimensions & Yes - use dimensions' nominal values in yes, no no

Tolerances expressions.No - use current values.
use_part_color_for_hidden_lines Colors Determines how to color the hidden lines no, yes no
of parts that have user defined colors.
"YES" - Use the dimmed part color for
hidden lines.SYSTEM_HIDDEN_COLOR
is ignored if it has been specified.
use_pre_wildfire_text_font Model Display Yes - Use the old stroke-based PTC font no, yes no
as the default font. No - Use a True Type
font as the default font.

use_software_linefonts Printing & Plotting Yes - The exact line style used in yes, no no
Pro/ENGINEER is plotted, stroked out dot
by dot, dash by dash, and space by space.
No - plots lines using the line font it
supports which most closely resembles the
font used in Pro/ENGINEER.
use_strict_ui_trail Without category Perform extra validation of user interface yes, no yes
actions when playing back trail files.
use_temp_dir_for_inst File Storage & Explicitly makes Pro/ENGINEER use the no, yes no
Retrieval Temp directory for regenerating instances
of models.
use_web_page_font_in_reports Without category Controls whether HTML reports use the yes, no no
browser's standard fonts.
user_defined_grid_interval Features Modify grid space in user defined length 0.5
units for handle movement.
user_iges_header_file Data Exchange Filename - Insert specified text file into the
Start section of IGES file. Valid parametric
note symbols will be replaced during
export. For example, &dwg_name in the
text file is replaced by the drawing name
when a drawing is exported.
variable_plots_in_inches Printing & Plotting No - Variable plot sizes may be entered in yes, no yes
millimeters.
variant_drawing_item_sizes Drawing No - Drawing items moved/copied to a yes, no no
different sheet or located on a changed
sheet keep same size and relative
orientation on paper. Yes - Some items
scale/reposition to be the same on paper,
and others scale and/or reposition to be
the same on screen.

vda_header Data Exchange The complete filename of the text file
containing VDA header information. If you
intend to use the same header for all VDA
files, specify the full pathname.
verify_on_save_by_default File Storage & Yes - "Verify Now" action will be selected yes, no no
Retrieval in the conflict dialog by default when an
unverified family table instance is to be
saved in PDM workspace.No - "Verify
Now" action will not be selected by default.
The user may explicitly specify the "Verify
Now" action in the conflict dialog.
versatec_cutter_installed Printing & Plotting Yes - Indicates that a cutter is installed on no, yes
a Versatec plotter.
visible_annotations_scope Assembly Specify whether sub-model annotations active model only, all active
will be visible in assemblies.If set to
"Active model only", only annotations of
the active model will be visible.If set to
"All", all annotations in sub-models will
also be displayed. Annotation display in
part mode is not affected.
visible_mapkeys User Interface No - Mapkeys will run without displaying no, yes no
picks being made in the Menu Manager
menus. This does not affect the display of
picks being made in menu bar menus or
dialog boxes.
visible_message_lines User Interface Sets the default number of visible 2
message lines in the Pro/ENGINEER
message area.
vrml_anchor_url Data Exchange Enables you to place an anchor on a
specified VRML component during the
export to VRML. The keywords are
optional.
vrml_background_color Data Exchange Yes - Exports a model to VRML with the yes, no no
Pro/ENGINEER background color.

vrml_explode_lines Data Exchange Yes - Exports a model to VRML with yes, no yes
explode lines for assembly or assembly
process data.
vrml_export_resolution Data Exchange Specifies the number of levels of detail high, medium, low medium
(LODs) in models exported in VRML
format.
vrml_export_version Data Exchange Allows the user to choose between 2.0, 1.0 2
exporting to the VRML 2.0 or 1.0 format.
vrml_file_duplicate_material Data Exchange Yes - Ensures that the model components yes, no no
retain their true color. No - In some
viewers, component colors might not be
consistent.
vrml_multiple_views Data Exchange All - Exports top-level and lower-level none, all, top all
assembly component views into VRML
format. None - Does not export component
views into VRML format. Top - Exports
top-level object view only into VRML
format.
vrml_parameters Data Exchange Controls the export of user parameters. designated, all, none designated
Designated - Export only designated
parameters. All - Export all parameters.
None - Do not export parameters.
vrml_simprep_export Data Exchange Yes - Specifies direct and in memory yes, no no
export of top-level assembly simplified
representation to Pro/FLY-THROUGH
package files.
warn_if_iso_tol_missing Without category Yes - Returns the user to the dimension yes, no no
properties dialog to select a different table.
No - Applies the tolerance according to
existing functionality.
wcell_fixt_info_setup_file Without category Specify name and path of the file
containing workcell and fixture name info.

web_browser_history_days System Enter number of days to store history 20
records.
web_browser_homepage System Enter location of Pro/E browser home /devsrc1/spg/system_1
page. /html/chinese_tw/proe/
helpsystop/resource_c
enter_index.htm
web_disable_js_command Application Enter a specific javascript command to be
Programming disabled
Interfaces
web_enable_javascript Without category Enables or disables Pro/Web.Link in the on, off off
embedded browser.
web_enable_subscription Application Enable the subscription mechanism for no, yes yes
Programming Connections
Interfaces
web_link_file_read Application Sets Pro/Web.Link permission to read data yes, no no
Programming from the local file system.
Interfaces
web_link_file_write Application Sets Pro/Web.Link permission to write yes, no no
Programming data to the local file system.
Interfaces
web_link_proe_read Application Sets Pro/Web.Link permission to read data yes, no no
Programming from a Pro/ENGINEER session.
Interfaces
web_link_proe_write Application Sets Pro/Web.Link permission to modify yes, no no
Programming data in a Pro/Engineer session.
Interfaces
web_link_security_autoprompt Application Yes - The Security dialog box is displayed yes, no yes
Programming when a Pro/Web.Link function requires
Interfaces security access beyond the current
settings.
web_max_mail_size Without category Set the maximum email attachment size in 5000
kilobytes.

weld_ask_xsec_refs Weld No - Do not ask for X-section references no, yes no
when creating weld features. Yes - Ask for
X-section references when creating weld
features.
weld_color Weld Defines default weld color. The three 0
session using Tools>Colors>System.
weld_dec_places Weld Sets the default number of decimal places 3
(0-10) to display in weld parameters.
weld_edge_prep_driven_by Weld Determines if the edge preparation feature part, assembly part
is created in the part or theassembly level.
weld_edge_prep_groove_angle Weld Specifies an initial default value for the 45
angle cut edge preparation.
weld_edge_prep_groove_depth Weld Specifies an initial default value for the 0.25
edge preparation depth.
weld_edge_prep_instance Weld Controls whether a family table instance is yes, no
created for edge preparation. Yes -
Instances of the components that receive
edge preparation are created.
weld_edge_prep_name_suffix Weld Specifies the suffix name for the instance _noep
that will be created during edge
preparation. Part name plus extension
makes the instance name.
weld_edge_prep_root_open Weld Specifies an initial default value for the 0.25
root opening edge preparation.

weld_edge_prep_visibility Weld Applies only if weld_edge_prep is set to generic, instance
Yes. Generic - Edge preparation features
are resumed in the generic and
suppressed in the instance. Instance -
Edge preparation features are suppressed
in the generic and resumed in the
instance.
weld_fillet_preferences_file Without category Specifies the directory to search when a
weld_general_preferences_file Without category Specifies the directory to search when a
weld_geom_type_default Weld Sets the default weld geometry type. surface, light surface
weld_groove_preferences_file Without category Specifies the directory to search when a
weld_notch_corner_radius Weld Specifies an initial default value for the 0.1
radius at weld notch corner.
weld_notch_height Weld Specifies an initial default value for the 0.4
weld notch height.
weld_notch_radius Weld Specifies an initial default value for the 0.5
weld notch radius.
weld_notch_width Weld Specifies an initial default value for the 0.5
weld notch width.
weld_plug_slot_preferences_file Without category Specifies the directory to search when a
weld_spot_preferences_file Without category Specifies the directory to search when a
weld_ui_standard Weld Specifies standard for welding user iso, ansi ansi
interface. ANSI - Use ANSI standards. ISO
- Use ISO standards.
window_gamma Photorender Gamma correction to apply to images 1
created by renderer. Default value is 1.0.

windows_browser_type System Select the type of embedded browser to ie_in_process,
be used. ie_in_sep_process,
mozilla_based_browser
windows_scale User Interface Scales Pro/ENGINEER windows with a 1
given coefficient. A value of 0.85 is usually
adequate to allow dynamic menus to
display to the right of the Pro/ENGINEER
window.
workpiece_instances Without category Cut out are created in Workpiece but not steps, operations_and_steps,
the family table instances. none, operations
www_add_aux_frame Data Exchange Creates additional frame for each process no, yes no
step or for assembly publication. Yes -
Auxiliary files aux.html are created for
each step in assembly process (in each
step00 directory) to be replaced by your
.html file. No - Auxiliary files are not
created.
www_export_geometry_as Data Exchange Specifies the output format by to one of vrml, cgm, jpg, cgm_vrml, jpg_vrml
the values jpg_vrml, cgm_jpg, all
www_multiple_views Data Exchange All - Writes all views in any component to none, all, top top
the appropriate VRML files. Top - Writes
only named views that reside in the
assembly or process assembly to top-level
VRML files. None - Does not write named
views to VRML files.
www_tree_location Data Exchange Specifies the location of the model tree in out, in out
the browser window. Out - Opens model
tree in a separate window. In - Includes
model tree in the Web page and removes
the Tree checkbox from the control panel.

x_angle Model Display Sets the default view orientation for 0
models (appears in the Orientation dialog
box). The default orientation is the last
option, x_angle, y_angle, or orientation, in
the configuration file.
y_angle Model Display Sets the default view orientation for 0
models (appears in the Orientation dialog
box). The default orientation is the last
option, x_angle, y_angle, or orientation, in
the configuration file.

Pro/ENGINEER Wildfire 4.0 to 5.0 Configuration Options Changes
Name Status Category Description Values Default value

accessory_window_display NEW Without category Docked - Displays the undocked, docked
accessory window embedded docked
in the active window.
Undocked - Displays the
accessory window as a stand
alone window.
advanced_style_surface_edit CHANGED Features Without Use advanced options by yes, no no
category default for Surface Edit in
Style.
allow_update_part_simp_rep_data CHANGED Assembly Allow updating part Simplified yes, no, prompt yes
Rep data in session
automatically when switching
from one Simp Rep to
another.Yes - Allow updating
part simplified rep data. No -
Do not update part simplified
rep data. Prompt - Prompt the
user if the current simplified
animate_explode_states NEW Model Display Animate the transition yes, no no
between explode states and
mold opening steps.
auto_backup_new_placemnt_refs NEW Assembly Yes - Create Component yes, no no
Reference Backup, No - Do
not Create Component
Reference Backup.
auto_evaluate_simprep_rules NEW Assembly If the option is "yes" newly no, yes no
created rep would be updated
each time on
retrieve/regeneration.
Parametric Technology Corporation 137 Pro/ENGINEER Wildfire 4.0 to 5.0 Configuration Options Changes
cdt_transfer_details DELETED Data Exchange No - Details (dittos) yes, no yes
associated with the imported
CADAM drawing are placed
on the current
Pro/ENGINEER drawing
sheet. Yes - Each detail
(ditto) associated with the
imported CADAM drawing
converts to a separate
additional sheet.
cmm_custom_tool_param_file NEW Manufacturing Defines the file that contains
the user-defined tool
parameters' list.
combined_views_customization NEW Without category Enable / Disable combined yes, no yes
views customization.
contact_surfaces_gap NEW Without category Sets the maximum allowable 0
gap between weld contact
surfaces.
datum_point_symbol CHANGED Model Display Specifies the shape of datum dot dot, cross, cross
point symbols displayed in circle, triangle,
Part or Assembly mode. square
default_ang_units NEW Dimensions & Sets the display of newly ang_deg, ang_deg
Tolerances created angular dimensions ang_min,
to decimal degrees ang_sec
(ang_deg),degrees and
decimal minutes (ang_min) or
degrees, minutes and
decimal seconds (ang_sec)
both in the model and in the
drawing. Does not affect
dimensions that already hav
display_z_extension_lines CHANGED Model Display Controls the display of yes, no yes
dimension z-extension lines.
Yes - z-extension lines will be
displayed; No - z-extension
lines will not be displayed.
dm_adv_import_file_types NEW Without category
dm_adv_import_system_params NEW Without category
dm_enable_import_export_ui NEW Without category yes, no no
drawing_setup_file CHANGED Drawing Sets the default drawing /shipsrcl01/spg/syste
setup file option values for m_1/text/prodetail.dtl
your Pro/ENGINEER session, /devsrc1/spg/system
otherwise, the system uses _1/text/prodetail.dtl
the default drawing setup file
option values. Certain
parameters in the file are
valid only if you have a
license for Pro/DETAIL.
dwg_unicode_conversion_languag CHANGED Drawing Defines the language used file, session file, file
e during Unicode conversion of session, usascii,
pre-Wildfire 4.0 drawings. english,
This option does not affect japanese, french,
the conversion of models. german, russian,
File uses the language stored italian, spanish,
in the drawing header file; korean,
Session uses the language of chinese_tw,
the current Pro/E session. chinese_cn,
hebrew, greek,
turkish, czech,
polish,
hungarian,
slovenian,
portuguese,
slovak
dxf_export_mapping_file DELETED Data Exchange Specifies the DXF export
mapping file. Absolute or
relative path to the file can be
used.
dxf_out_stroke_text DELETED Data Exchange Strokes == text is converted none, special, all none
to lines and dots. "NONE"-
Does not stroke out the text
for export to DXF or DWG.
"ALL" - Strokes out all the
text. "SPECIAL" - Strokes out
only special characters.
ecad_comp_xsec_def_name CHANGED Without category Will allow pre-setting default
Data Exchange X-section to be used for
component outline output to
*.eda format.
ecad_mtg_hole_import NEW Data Exchange Setup the default for the yes, no, as yes
import of ECAD Holes type lightweight
MTG (IDF 3.0 or IDX ONLY)
ecad_pin_hole_import CHANGED Data Exchange Setup the default for the yes, no yes, no, no
import of ECAD Holes from as lightweight
type PIN (IDF 3.0
ONLY)Setup the default for
the import of ECAD Holes
from type PIN (IDF 3.0 or IDX
ONLY)
ecad_tool_hole_import NEW Data Exchange Setup the default for the yes, no, as yes
import of ECAD Holes type lightweight
TOOL (IDF 3.0 or IDX ONLY)
ecad_via_hole_import CHANGED Data Exchange Setup the default for the yes, no yes, no, yes
import of ECAD Holes from as lightweight
type VIA (IDF 3.0
ONLY)Setup the default for
the import of ECAD Holes
from type VIA (IDF 3.0 or IDX
ONLY)
enable_3dmodelspace_browser_ta NEW Without category Yes - Display 3DModelSpace yes, no yes
b tab in the browser when
Pro/E starts. No - Display
3DModelSpace tab only
when user click a
3DModelSpece link in the
navigator
explode_animation_max_time NEW Model Display Sets the maximum amount of 1
time an animation between
explode states will take.
fem_shell_elem_type NEW Without category Sets the default shell element tri, quad quad
type in FEM mode.
file_open_default_view CHANGED Without category Specify the initial view for file list, details list
File Storage & dialogs: "LIST" or "DETAILS".
Retrieval
frt_enabled NEW Without category Loads feature recognition yes, no no
application.
geometry_analysis_color_scheme NEW File Storage & Specifies the location of the
Retrieval geometry analysis color
scheme file.
graphics CHANGED System Sets the optional graphics opengl opengl
environment used by certain x_windows
platforms for running
Pro/ENGINEER. Refer to the
starbase
Installation Guide for a list of xgl
defaults and optional win32_gdi
graphics.
help_center_path NEW User Interface URL of an active
Pro/ENGINEER Help Center,
if the Help Center is not
installed at the default path
(along with Pro/E product), of
nature
http://localhost:/index.jspx.
Or, URL of the
Pro/ENGINEER Help Center,
that is deployed on a web
server.
idd_repair_tangency NEW Without category yes, no no
intf_generate_log_file NEW Data Exchange Specifies not to generate or no, short, long short
generate short or long log
files for data exchange import
operations.
intf_in_profile_default NEW Data Exchange Specifies the name of the
existing import profile to use
by default.
intf_profile_dir NEW Data Exchange Specifies the directory where
import and export profiles are
kept. Use the full path to
avoid problems.
intf2d_in_dxf_mapping_file NEW Data Exchange Specifies the mapping file for
DXF and DWG import.
Absolute or relative path to
intf2d_in_iges_symbols NEW Data Exchange Controls whether to import yes, no yes
IGES symbols as symbols or
entities by default. Yes -
Import IGES symbols as
symbols by default. No -
Import IGES symbols as
entities by default.
intf2d_in_open_log_window NEW Data Exchange Yes - Opens Import Log File yes, no no
in separate window. No - the
Log File will not appear in the
window.
intf2d_out_acad_unicode NEW Data Exchange If set to Yes, non-ASCII yes, no no
characters will be written in
UNICODE encoding.
intf2d_out_dxf_mapping_file NEW Data Exchange Specifies the mapping file for
DXF and DWG export.
Absolute or relative path to
intf2d_out_stroke_text NEW Data Exchange Strokes == text is converted none, special, all none
to lines and dots. "NONE"-
Does not stroke out the text
for export. "ALL" - Strokes out
all the text. "SPECIAL" -
Strokes out only special
characters.
intf3d_out_annotations NEW Data Exchange Export annotations with yes, no yes
models.
intf3d_out_jt_structure NEW Data Exchange Specifies product structure to per_part, per_part
file structure mapping defined fully_shattered,
in JT Open Toolkit. monolithic
intf3d_out_notes NEW Data Exchange Exports notes with models. yes, no yes
intf3d_out_parameters NEW Data Exchange Exports parameters with all, none, all
models. designated
isogen_attribute_map_file CHANGED Piping Specifies the mapping /shipsrcl01/spg/syste
between isogen parameter m_1/text/piping_data/
and attribute name. isodata/isogen_attrib
ute_map.ptd
/devsrc1/spg/system
_1/text/piping_data/is
odata/isogen_attribut
e_map.ptd
isogen_endtype_map_file CHANGED Piping Specify name of file mapping /shipsrcl01/spg/syste
Pro/Piping endtypes with m_1/text/piping_data/
ISOGEN endtypes isodata/isogen_endty
pe_map.ptd
/devsrc1/spg/system
odata/isogen_endtyp
e_map.ptd
isogen_nominal_size_map_file CHANGED Piping Specify name of file mapping /shipsrcl01/spg/syste
Pro/Piping Size with Nominal m_1/text/piping_data/
Sizes in MM and Inches isodata/isogen_nomi
nal_size_map.ptd
/devsrc1/spg/system
odata/isogen_nomina
l_size_map.ptd
isogen_symbol_map_file CHANGED Piping Specify name of file for /shipsrcl01/spg/syste
mapping Pro/Piping selection m_1/text/piping_data/
names with ISOGEN symbol isodata/isogen_symb
keys (SKEY)s ol_map.ptd
/devsrc1/spg/system
odata/isogen_symbol
_map.ptd
keep_model_in_open_window NEW Without category Controls whether a model will no, yes no
be kept displayed in its
window while accessory
window is used.
keep_style_items_hidden_on_exit CHANGED Features Without Keep style entities hidden yes, no no
category after exiting of the Style
feature definition.
last_session_directory_path NEW Without category Sets the directory that holds /home/kapig/.wf/.setti
the temp files for the session ngs
recording mechanism.
last_session_retrieval NEW Without category Yes - Activates recording yes, no yes
mechanism that enables the
session to be retrieved during
the next session. No - The
recording mechanism is not
available and the session can
not be retrieved.
make_aux_view_notes CHANGED Drawing Automatically adds view yes, no no
names to auxiliary views
using AUX VIEW* viewname-
viewname. You can modify
the view name after adding
the view to the drawing.
menu_manager_position NEW User Interface outside: Top left corner of outside, inside, adaptive
Menu Manager is aligned to adaptive
top right corner of
window,inside: Top right
corner of Menu Manager is
aligned to top right corner of
graphics area,adaptive:
Behavior is like 'outside'
unless there's not enough
room available,
merge_type NEW Features Sets the default merge type join, intersect intersect
surface merge operations.
modeltree_show_gen_of_instance NEW User Interface Determines whether the yes, no no
generic name is displayed as
an extension of the instance
name in the model tree and
other model name lists.
nc_autodoc_param_dir NEW Manufacturing Location of the setup file that
describes which process
parameters will be included in
the parameter table.
nc_autodoc_report_dir NEW Manufacturing Location for storing the report
and images generated by the
shop floor documentation
tool.
nc_autodoc_setup_dir NEW Manufacturing Location for documentation
setup files that describe
which process parameters
will be included in the
parameter table.
nc_autodoc_template_dir NEW Manufacturing Location of the style sheet
and default images used for
shop floor documentation.
ncmdl_bar_stock_part_path CHANGED Manufacturing Sets path for storage and /shipsrcl01/spg/syste
retrieval of stock instances for m_1/text/ncmdl_data/
creating workpiece in NC ncmdl_bar.prt
Model. Specify full path, /devsrc1/spg/system
including part name, to avoid _1/text/ncmdl_data/n
problems. cmdl_bar.prt
ncmdl_billet_stock_part_path CHANGED Manufacturing Sets path for storage and /shipsrcl01/spg/syste
retrieval of stock instances for m_1/text/ncmdl_data/
creating workpiece in NC ncmdl_billet.prt
Model. Specify full path, /devsrc1/spg/system
including part name, to avoid _1/text/ncmdl_data/n
problems. cmdl_billet.prt
new_wf5_simp_rep_ui NEW Without category Yes - Use Component yes, no yes
Chooser base Simp Rep UI,
No - Use old Simp Rep
definition UI.
pipeline_assembly_library_dir CHANGED Piping Sets the default pipeline /shipsrcl01/spg/syste
assembly library directory. m_1/text/piping_data/
pipelinelib/
/devsrc1/spg/system
_1/text/piping_data/pi
pelinelib/
piping_appearance_map_file CHANGED Piping Sets the default piping /shipsrcl01/spg/syste
appearance map filename. m_1/text/piping_data/
master_catalog/pipin
g_appearance.map
/devsrc1/spg/system
_1/text/piping_data/m
aster_catalog/piping_
appearance.map
piping_bolt_nut_select_file CHANGED Piping Piping bolts and nuts /shipsrcl01/spg/syste
selection file. m_1/text/piping_data/
g_bolt_nut_select.ptd
/devsrc1/spg/system
bolt_nut_select.ptd
piping_end_compatibility_file CHANGED Piping Sets the default piping end /shipsrcl01/spg/syste
compatibility filename. m_1/text/piping_data/
g_end_compatibility.
ptd
/devsrc1/spg/system
end_compatibility.ptd
piping_extend_dim_scheme CHANGED Piping Specify a dimension scheme cartesian, spherical cartesian
for piping extend segment. cylindrical,
spherical
piping_fitt_category_map_file CHANGED Piping Sets the default piping fitting /shipsrcl01/spg/syste
category map filename. m_1/text/piping_data/
sample_project/pipin
g_fitt_category_map.
ptd
/devsrc1/spg/system
_1/text/piping_data/s
ample_project/piping
_fitt_category_map.pt
d
piping_fitt_library_dir CHANGED Piping Sets the default piping fitting /shipsrcl01/spg/syste
library directory. m_1/text/piping_data/
fittinglib/
/devsrc1/spg/system
_1/text/piping_data/fit
tinglib/
piping_insulation_dir_file CHANGED Piping Sets the default piping /shipsrcl01/spg/syste
insulation directory filename. m_1/text/piping_data/
sample_project/pipin
g_insulation_dir.ptd
/devsrc1/spg/system
_insulation_dir.ptd
piping_manufacture_dir_file CHANGED Piping Sets the default piping /shipsrcl01/spg/syste
manufacture directory m_1/text/piping_data/
filename. master_catalog/pipin
g_manufacture_dir.pt
d
/devsrc1/spg/system
manufacture_dir.ptd
piping_material_file CHANGED Piping Sets the default piping /shipsrcl01/spg/syste
material filename. m_1/text/piping_data/
g_material.ptd
/devsrc1/spg/system
material.ptd
piping_mcat_dir CHANGED Piping Sets the default piping master /shipsrcl01/spg/syste
catalog directory. m_1/text/piping_data/
master_catalog/
/devsrc1/spg/system
aster_catalog/
piping_mcat_dir_file CHANGED Piping Sets the default piping master /shipsrcl01/spg/syste
catalog directory filename. m_1/text/piping_data/
g_mcat_dir.ptd
/devsrc1/spg/system
mcat_dir.ptd
piping_project_data_dir CHANGED Piping Sets the default Project data /shipsrcl01/spg/syste
directory. m_1/text/piping_data/
sample_project/
/devsrc1/spg/system
ample_project/
piping_spec_dir_file CHANGED Piping Sets the default piping /shipsrcl01/spg/syste
specification directory m_1/text/piping_data/
filename. sample_project/pipin
g_spec_dir.ptd
/devsrc1/spg/system
_spec_dir.ptd
popup_refpairintch_window DELETED Without category Bring forward the window yes, no no
being used with the reference
pairing table.
preferred_publish_deliverable NEW Drawing Set the default preferred print, iges, set, print
deliverable for the Publish dxf, step, cgm,
Context in Drawings. pdf, dwg, tiff,
medusa, stheno
pro_font_dir CHANGED File Storage & Sets the default font directory /shipsrcl01/spg/syste
Retrieval (Pro/ENGINEER will load all m_1/text/fonts/
fonts in this directory into the /devsrc1/spg/system
drawing regardless of the _1/text/fonts/
contents of the system and
working directories).
pro_gplug_dir CHANGED Data Exchange Specifies the directory in /shipsrcl01/spg/syste
which Granite application m_1/sun_solaris_x64
plug-ins are located. Use the /gplugs/
full pathname to avoid /devsrc1/spg/system
problems. _1/sun_solaris_x64/g
plugs/
pro_lwa_library_path DELETED Without category Allows the user to specify the /shipsrcl01/spg/syste
path to LWA library. m_1/graphic-
library/smdata/archiv
es/
pro_lwa_license_path DELETED Photorender Allows the user to specify the
path to LWA license file.
pro_palette_dir CHANGED Drawing Sets the default directory for /shipsrcl01/spg/syste
drawing symbol palette files. m_1/symbols/palette/
/devsrc1/spg/system
_1/symbols/palette/
pro_surface_finish_dir CHANGED File Storage & Sets the default directory for /shipsrcl01/spg/syste
Retrieval your user-defined surface m_1/symbols/surffins
finish symbols. Use the full /
pathname to avoid problems. /devsrc1/spg/system
_1/symbols/surffins/
punch_models_directory NEW Sheetmetal Sets path to directory that
contains the punch models.
real_time_rendering_display NEW Model Display Disable realtime rendering. disable, disable
transparent_floor,
room_display
regen_failure_handling NEW Without category Specifies whether to enter resolve_mode, no_resolve_mode
resolve mode when no_resolve_mod
regeneration failures e
occur.Resolve_mode - Enter
resolve mode when
No_resolve_mode - Don't
enter resolve mode when
Ask_user - Let the user
decide wh
regen_simp_retrieve CHANGED File Storage & Regenerate the assembly yes, no yes no
Retrieval when retrieving an assembly
simplified representation. Yes
- Regenerates the assembly
on retreival.No - The
assembly is not regenerated
on retrieval.
replace_history_rule_order CHANGED Assembly Set the default order of the disable, 1, 2, 3, 3
history evaluation rule in the 4, 5
replace operation. Disable -
the evaluation rule will be
disabled by default. Number -
set the order of the rule
relative to other evaluation
rules.
replace_interface_rule_order CHANGED Assembly Set the default order of the disable, 1, 2, 3, 1
interface evaluation rule in 4, 5
the replace operation.
Disable - the evaluation rule
will be disabled by default.
Number - set the order of the
rule relative to other
evaluation rules.
replace_sameid_rule_order CHANGED Assembly Set the default order of the disable, 1, 2, 3, 5
same id evaluation rule in the 4, 5
replace operation. Disable -
the evaluation rule will be
disabled by default. Number -
set the order of the rule
relative to other evaluation
rules.
replace_samename_rule_order CHANGED Assembly Set the default order of the disable, 1, 2, 3, 2
same name evaluation rule in 4, 5
the replace operation.
evaluation rules.
replace_sameparam_rule_order CHANGED Assembly Set the default order of the disable, 1, 2, 3, 4
same parameters evaluation 4, 5
rule in the replace operation.
evaluation rules.
replace_unrelated_automatic CHANGED Assembly Availability of automatic yes, no no
reference pairing in unrelated
replace. No - Automatic
reference pairing is not
available. Yes - Automatic
reference pairing is available.
report_end_splice NEW Electromechanic Setup whether the terminal yes, no no

al splices of cables are
reported.
reserved_menu_space CHANGED User Interface Reserves space for extra 1
menus to the right of the
Pro/ENGINEER window (1.0-
4.0). This option overrides
windows_scale.Reserves
space for extra menus to the
right of the Pro/ENGINEER
window (0.0-4.0). This option
overrides windows_scale.
round_displayed_dim_values NEW Dimensions & No - newly created or first yes, no yes
Tolerances shown dimension is displayed
with all its significant
decimals."Rounded
Dimension Value" Check Box
will be unchecked while
opening Dimension
Properties Dialog. Yes -
number of decimals is
rounded according to defa
save_drawing_picture_file CHANGED Drawing Embed - Embeds a picture no, export, no embed
file inside a drawing for embed, both
preview purposes. Export -
Saves a drawing file as a
picture file in the working
directory when saving a
drawing. Both - Does both
embed and export.
show_annotations_dialog_limit NEW Drawing Default value for annotations
dialog
show_description_view_mgr NEW Without category Yes - show a column for yes, no no
Description field for all tabs in
view manager.
sim_auto_map_max_dist CHANGED Without category Sets the default maximum 0.0012
distance tolerance for auto-
mapping of pressure
load.Sets the default
maximum distance tolerance
(relative to model size) for
auto-mapping of pressure
load. The default value is
0.0012.
sim_auto_pairing_thickness NEW Without category Set the value of characteristic 0
thickness for auto-detection
of shell pairs. Using this as a
threshold value, auto-
detection will find surface
pairs with thickness smaller
than this value.
sim_check_jacobian_corners NEW Without category No - Suppress Jacobian yes, no no
checks at corner nodes
(default). ANSYS and
Nastran will check parabolic
elements Jacobian at the
integration points only and
FEM will fix too curved
elements for the same
criterion. Yes - Jacobian is
checked both at integration p
sim_display_current_csys_triad NEW Without category Toggles display of the current yes, no
coordinate system triad in the
lower right corner of the
window.
sim_display_highlight_refs NEW Without category If set to yes, selecting a yes, no
load/constraint will highlight
its geometrical references.
sim_display_load_name NEW Without category If set to yes, the yes, no
load/constraint name is
displayed in the label.
sim_display_mesh_control_name NEW Without category If set to yes, the yes, no
Mesh/AutoGEM control name
is displayed in the label.
sim_display_mesh_control_value NEW Without category If set to yes, the yes, no
Mesh/AutoGEM control value
is displayed in the label.
sim_display_shell_pairs NEW Without category Toggles display of shells no, yes
pairs.
sim_display_z_buffered NEW Without category Toggles z-buffered display of yes, no
Mechanica icons.
sim_extend_surf_max_angle NEW Without category Controls the maximum angle 30
between a surface to be
extended during shell
compression and its adjacent
surfaces. If the angle is
higher than specified, the
adjacent surfaces will be
extended. The default is 30
degrees. The range is from 0
to 90 degrees.
sim_icon_distribution_density NEW Without category Determines how many icons -1
are drawn for a distribution. 1
is fewer, 10 is the highest.
sim_ignore_unpaired NEW Without category Yes - Unpaired surfaces are yes, no no
ignored when meshing the
model, placing you directly
into the AFTER COMP menu
(the CONT MESH menu is
skipped).
sim_pp_display_beam_thickness NEW Without category Sets the thickness for beams actual, 1, 2, 3, 4, 5
and 2D-shells display in Post 5
Processor. Numerical values
specify the thickness in
pixels.
sim_pp_path_absolute CHANGED Without category Choose Absolute (Yes) or yes, no yes no
Relative (No) path to "rwd"
file.
sim_remove_unopposed NEW Without category Yes - The system ignores yes, no no
unopposed surfaces when
meshing the model; the
system also deselects the
UseUnopposed option. No -
the system uses the
unopposed surfaces in the
shell model.
simprep_default_model_status NEW Assembly Determines the default model exclude, master, exclude
status while defining a new graphics,
simplified rep. geometry
simulation_product CHANGED Without category Set Mechanica product being structure, prompt
selected (Structure/Thermal). thermal, prompt
Prompt (default) -Brings
Mechanica Model Type
Dialog. This option is used
only if the information about
Mechanica product is not yet
stored with model.
sketcher_dec_places DELETED Sketcher Sets the default number of 2
decimal places displayed for
dimensions in Sketcher. The
extrusion depth or any other
dimension you enter to create
3D geometry is controlled by
the default_dec_places
option.
sketcher_intent_manager DELETED Sketcher Specifies which sketcher to yes, no yes
use. Yes - Intent Manager is
the default. No - Old sketcher
is the default.
sketcher_strngthn_to_def_dec_pl NEW Without category This option enable the user to yes, no yes
keep a highly precise value
during creation or convertion
strong dimension.
snap_single_constraints NEW Without category When dynamically dragging yes, no yes
components during
component placement, allow
to snap to references one
constraint at a time.
step_export_format CHANGED Data Exchange Specifies output format when ap203_is ap203_is
exporting to STEP. AP203_IS ap214_cd
- Formats output to ISO ap202_is
10303 AP203IS format. 203_is_ext
AP214_CD - Formats output ap214_dis
with geometry that meets the ap209_dis
specification for the long-term ap214_is
schema for AP214cc1.
style_auto_regen_curves NEW Without category Yes - Enable auto yes, no yes
regeneration of curves.
style_auto_regen_shaded_surface NEW Without category Yes - Enable auto yes, no yes
regeneration of shaded
surfaces.
style_auto_regen_surface NEW Without category Yes - Enable auto yes, no yes
regeneration of surfaces.
style_connection_arrow_scale NEW Without category Set scale factor of surface 1
connection arrow. Number
should be greater then 0.
style_display_grid NEW Without category Yes - Display grid for active yes, no yes
datum plane.
style_grid_spacing NEW Without category Set the number of lines to 5
display on grid. Number
should be equal or greater
than 2.
style_surface_mesh_display NEW Without category On - Display surfaces mesh. off, on, off when off
Off - Do not display surfaces shaded
mesh. Off When Shaded -
Display surfaces mesh
except when shaded.
style_surface_mesh_quality NEW Without category Sets the quality of the surface 1
mesh. Values range is
between 0.1 to 10.
summary_help CHANGED User Interface Refers to the one-line help yes, no yes no
Messages that are either
displayed or not displayed.
template_mfgcast CHANGED File Storage & Specify the model used as inlbs_mfg_cast.mfg
Retrieval the default manufacturing inlbs_mfg_cast.asm
cast template.
template_mfgcmm CHANGED File Storage & Specify the model used as inlbs_mfg_cmm.mfg
Retrieval the default manufacturing inlbs_mfg_cmm.asm
cmm template.
template_mfgemo CHANGED File Storage & Specify the model used as inlbs_mfg_emo.mfg
Retrieval the default manufacturing inlbs_mfg_emo.asm
expert machinist template.
template_mfgmold CHANGED File Storage & Specify the model used as inlbs_mfg_mold.mfg
Retrieval the default manufacturing inlbs_mfg_mold.asm
mold template.
template_mfgnc CHANGED File Storage & Specify the model used as inlbs_mfg_nc.mfg
Retrieval the default manufacturing inlbs_mfg_nc.asm
assembly template.
tol_num_digits_default_driven CHANGED Drawing Yes - The Default check yes, no yes
boxes in the number of digits
area of the Dimension
Properties dialog will be
checked when a dimension is
created or first shown. No -
The check boxes will be
unchecked when a dimension
is created or first shown.
ttf_handling_for_plot_files NEW Printing & Defines how annotations stroke all fonts, use
Plotting using True Type Fonts are use true type
written to the plot file. Use fonts
True Type Fonts will reduce
the plot file size, but font
substitution may occur due to
device settings. Annotations
that do not use True Type
Fonts are unaffected by this
op
units_system_dic_file CHANGED Piping Specifies the file containing /shipsrcl01/spg/syste
the mapping for MCAT m_1/text/piping_data/
filename and units. master_catalog/pipin
g_units_system_dic_f
ile.ptd
/devsrc1/spg/system
units_system_dic_file
.ptd
update_copy_geom_location NEW Assembly Yes-Copy Geometry will try to yes, no yes
update location of copied
geometry based on changes
to component placements
even if some components are
excluded or in graphics rep.
use_cadam_plot_data DELETED Data Exchange Determines whether the yes, no no
information in the Plot Axis
System element should be
taken into account when
importing a CADAM drawing.
web_browser_homepage CHANGED System Enter location of Pro/E /shipsrcl01/spg/syste
browser home page. m_1/html/chinese_tw
/proe/helpsystop/reso
urce_center_index.ht
m
/devsrc1/spg/system
_1/html/chinese_tw/p
roe/helpsystop/resour
ce_center_index.htm
weld_fillet_preferences_file NEW Without category Specifies the directory to
search when a weld
parameter file is needed.
weld_general_preferences_file NEW Without category Specifies the directory to
search when a weld
weld_geom_type_default CHANGED Weld Sets the default weld solid, light solid surface
geometry type. surface, light
weld_groove_preferences_file NEW Without category Specifies the directory to
search when a weld
weld_plug_slot_preferences_file NEW Without category Specifies the directory to
search when a weld
weld_spot_preferences_file NEW Without category Specifies the directory to
search when a weld
windows_browser_type NEW System Select the type of embedded ie_in_process,
browser to be used. ie_in_sep_proces
s,
mozilla_based_br
owser
workpiece_instances CHANGED Without category Instances are created in steps,
Workpiece for each steps.Cut operations_and_
out are created in Workpiece steps steps,
but not the family table operations_and_
instances. steps, none,
operations

WF5 Config Options

Uploaded by

Copyright:

Available Formats

WF5 Config Options

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

WF5 Config Options

Uploaded by

Copyright:

Available Formats

Table of Contents

Pro/ENGINEER Wildfire 5.0 Configuration Options 1

Pro/ENGINEER Wildfire 4.0 to 5.0 Configuration Options Changes 137

Parametric Technology Corporation iii Pro/ENGINEER Wildfire 5.0 Configuration Options

Name Category Description Values Default value

Parametric Technology Corporation 1 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 2 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 3 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 4 Pro/ENGINEER Wildfire 5.0 Configuration Options

angular_tol Dimensions & An alternative format for setting default 0

Parametric Technology Corporation 5 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 6 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 7 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 8 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 11 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 12 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 13 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 14 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 15 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 16 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 17 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 18 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 19 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 20 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 21 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 22 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 23 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 24 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 25 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 26 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 27 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 28 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 29 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 30 Pro/ENGINEER Wildfire 5.0 Configuration Options

ecad_comp_csys_def_name Data Exchange Specifies the default coordinate system

Parametric Technology Corporation 31 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 32 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 33 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 34 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 35 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 36 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 37 Pro/ENGINEER Wildfire 5.0 Configuration Options

fem_edge_angle Without category Sets the minimum acceptable default 30

Parametric Technology Corporation 38 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 39 Pro/ENGINEER Wildfire 5.0 Configuration Options

fix_imported_set_view_orient Data Exchange Sets viewing characteristics for imported yes, no no

Parametric Technology Corporation 40 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 41 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 42 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 43 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 44 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 45 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 46 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 47 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 48 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 49 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 50 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 51 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 52 Pro/ENGINEER Wildfire 5.0 Configuration Options

Parametric Technology Corporation 53 Pro/ENGINEER Wildfire 5.0 Configuration Options