Accelerator Control System: Section
Accelerator Control System: Section
Accelerator Control System: Section
ACC
SECTION
ACCELERATOR CONTROL SYSTEM C
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ...................... 2 SERVICE DATA AND SPECIFICATIONS (SDS) ........ 4 F
Removal and Installation .......................................... 2 Accelerator Control ................................................... 4
REMOVAL ............................................................. 2 ADJUSTABLE ACCELERATOR PEDAL ............... 4
INSTALLATION ..................................................... 3 G
INSPECTION AFTER INSTALLATION ................. 3
LBIA0379E
1. Adjustable accelerator pedal assem- 2. A/T control cable mounting bracket (part 3. Adjustable pedal electric motor (part
bly of the accelerator pedal assembly) of the accelerator pedal assembly)
4. Adjustable brake pedal cable (part
of the accelerator pedal assembly)
CAUTION:
● Before removal and installation the accelerator and brake pedals must be in the frontmost posi-
tion. This is to align the base position of the accelerator and brake pedals.
● Do not disassemble the accelerator pedal assembly.
● Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
● Do not disassemble the accelerator pedal adjusting mechanism.
● Avoid damage from dropping the accelerator pedal assembly during handling.
● Keep the accelerator pedal assembly away from water.
REMOVAL
1. Move the accelerator and brake pedals to the frontmost position.
2. Turn the ignition switch OFF and disconnect the negative battery terminal.
3. Disconnect the adjustable brake pedal cable from the adjustable brake pedal.
● Unlock, then pull the adjustable brake pedal cable to disconnect it from the adjustable brake pedal.
● Avoid damage from dropping the accelerator pedal assembly during handling.
E
● Keep the accelerator pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal. F
INSPECTION AFTER INSTALLATION
● Check that the accelerator pedal moves smoothly within the specified ranges.
G
Adjustable accelerator pedal – total pedal applied stroke : 48.3 mm (1.90 in)
Adjustable accelerator pedal – total pedal adjustment travel : 73.2 mm (2.88 in)
● Check that the accelerator pedal smoothly returns to the original position. H
● Perform an electrical inspection of the accelerator pedal position sensor. Refer to EC-590, "DTC P2138
APP SENSOR" .
CAUTION: I
When the harness connector of the accelerator pedal position sensor is disconnected, perform
″Accelerator Pedal Released Position Learning″. Refer to EC-89, "Accelerator Pedal Released
Position Learning" . J