Electrical

temperature measurement

Threaded resistance thermometer

Model TR10-D, miniature design
WIKA data sheet TE 60.04

for further approvals

see page 5

Applications

■■ Machine building, plant and vessel construction

■■ Propulsion technology
■■ Air-conditioning and refrigeration systems

Special features
■■ Application ranges from -200 ... +500 °C (-328 ... +932 °F)
■■ Compact design
■■ Universal application
■■ Direct installation into the process
■■ Explosion-protected versions

Description

Resistance thermometers of this series are used for the

Threaded resistance thermometer, miniature design,
measurement of liquid or gaseous media at low and medium
model TR10-D
pressures.

The resistance thermometer is screwed directly into the

process. The electrical connection is made via connection
terminals in the connection head (splash-proof). The measu-
ring inserts are available in two variants, depending upon the
application. The choice is between a replaceable, spring-
loaded miniature measuring insert and a non-replaceable,
permanently screwed-in design.

Insertion length, process connection and sensor can each be

selected for the respective application.

WIKA data sheet TE 60.04 ∙ 04/2016 Page 1 of 5

Data sheets showing similar products:

Thermocouple for additional thermowell; model TC10-B; see data sheet TE 65.02
Cable resistance thermometer; model TR40; see data sheet TE 60.40
Sensor Measuring insert

The sensor is located in the tip of the thermometer or Removable design

measuring insert, respectively. Using two screws and springs, the measuring insert can be
mounted into a connection head (form J), replaceable and
Sensor connection method mounted spring-loaded into the thermowell.
■■ 2-wire
■■ 3-wire
■■ 4-wire Fixed design
The measuring insert is manufactured as a unit (as a tube
Sensor tolerance value per DIN EN 60751 assembly in a thermowell) and thus cannot be replaced.
■■ Class B
■■ Class A With this design, the temperature range is limited to max.
■■ Class AA 250 °C.

Combinations of 2-wire connection and class A or class AA

are not allowed.
Transmitter (option)
For detailed specifications for Pt100 sensors, see Technical
Within the model JS connection head a model T91.20
information IN 00.17 at www.wika.com.
analogue temperature transmitter can be factory-fitted.
It is mounted in place of the terminal block.

The version with temperature transmitter is not suitable for

use in hazardous areas.

For further specifications on the model T91.20 temperature

transmitter please refer to WIKA data sheet TE 91.01.

Components model TR10-D

3157966.01

Legend:
 Connection head
 Process connection
 Thermowell
 Terminal block

Connection head

JS
JS BS BSZ, BSZ-K BSZ-H, BSZ-HK BSS BS
Model Material Cable outlet Ingress protection Cap Surface
JS Aluminium M16 x 1.5 1) IP65 Cap with 2 screws Blue, lacquered 2)

1) Standard
2) RAL 5022

Page 2 of 5 WIKA data sheet TE 60.04 ∙ 04/2016

Thermowell Permanent threaded connection
Material: stainless steel The connection is permanently fixed to the thermowell.
The standard neck length is N (MH) = 55 mm
Thermowell Ø Insertion length U1 in mm
in mm 50 75 100 150 160 250 400
6 x x x x x x x
Compression fitting
8 - - x x x x x

The compression fitting enables simple, on-site adjustment

to the required insertion length.
Permissible temperature ranges
The self-extending nature of the compression fitting results in
the smallest possible neck length, N (MH), of approx. 55 mm.
Class Sensor construction
Wire-wound Thin-film Since the compression fitting is adjustable on the thermowell,
Class B -200 ... +500 °C -50 ... +500 °C the size of the insertion length, A, and the neck length,
Class A 1) -100 ... +450 °C -30 ... +300 °C N (MH), are stated as the values for the delivered item.
Class AA 1) -50 ... +250 °C 0 ... 150 °C ■■ Ferrule material: stainless steel or PTFE

1) Not with 2-wire connection method Ferrules from stainless steel are only adjustable once; once
the fitting has been loosened, sliding along the thermowell is
For detailed specifications for Pt100 sensors, see Technical no longer possible.
information IN 00.17 at www.wika.com.
Ferrules from PTFE can be adjusted numerous times; once
■■ At the head: -40 ... +80 °C the fitting has been loosened it can again be tightened onto
■■ Storage: -40 ... +80 °C the thermowell.
■■ Max. temperature at process connection: 150 °C

Process connections
Double nipple
All process connections are manufactured from stainless
steel. Other materials are available on request. Using a double-sided threaded nipple, the thermometer
can be screwed directly into the process. In this case the
The insertion length A (U1 or U2) can be customised. permissible temperature ranges must be observed.

The neck length, N (MH), depends on the type of the process The neck length, N (MH), for parallel threads depends on the
connection selected. height of the hexagon. This is 10 mm.

The neck length N (MH) of NPT threads not only includes the
Extended process connection hexagon height but also half of the thread height. This gives
us a neck length, N (MH), of approx. 19 mm.
Connection heads, connecting leads/wires and the optional
transmitter must only be used within the above-mentioned
temperature ranges. Without process connection
If the thermometer will operate at temperatures outside of the This version is designed mainly for mounting in one of the
temperature limits, the clearance between the connection available compression fittings.
head and the hot or cold surfaces must be increased.
The neck length, N (MH), in this case only specifies the
This neck length is dependent upon the intended application height of the hexagon on the head of the thermowell.
and generally serves as isolation or as a cooling element N (MH) is always 7 mm.
between the process and the connection head.

The resistance thermometers of the TR10-D series are designed for direct installation into the process. Using it in an additional
thermowell only makes sense in exceptional cases.

WIKA data sheet TE 60.04 ∙ 04/2016 Page 3 of 5

Dimensions in mm

Extended process connection

11346418.01
Without process Threaded connection Compression fitting
connection Double nipple (welded) (adjustable)

Thread

Legend:
A (U1) Insertion length N (MH) Neck length
(with parallel threads) (U) Insertion length per DIN 43772
A (U2) Insertion length (U1) Insertion length in accordance with international standards
(with tapered threads) Ød Measuring insert diameter

Electrical connection

1 x Pt100, 2-wire 1 x Pt100, 3-wire 1 x Pt100, 4-wire 2 x Pt100, 2-wire

3383942.03

black yellow

white red white red white red white red

red red red

red red red
white

white white white black

white
yellow

For the electrical connections of built-in temperature transmitters see the corresponding data sheets or operating instructions.

Page 4 of 5 WIKA data sheet TE 60.04 ∙ 04/2016

 Explosion protection (option) Certificates (option)

Resistance thermometers of the TR10-D series are available Certification type Measuring Material
with an EC-type examination certificate for “intrinsically safe”, accuracy certificate
Ex i, ignition protection. 2.2 test report x x
These instruments comply with the requirements of the ATEX
3.1 inspection certificate x -
directive for gases and dusts.
DKD/DAkkS calibration x -
certificate
The permissible power Pmax as well as the permissible
ambient temperature for the respective category can be seen The different certifications can be combined with each other.
on the EC-type examination certificate and in the operating
instructions.

Approvals

Logo Description Country

EC declaration of conformity European Community
■■ EMC directive 1)
EN 61326 emission (group 1, class B) and interference immunity (industrial application)
■■ ATEX directive (option)

IECEx (option) IECEx member states

Hazardous areas
EAC (option) Eurasian Economic
■■ Import certificate Community
■■ Hazardous areas

GOST (option) Russia

Metrology, measurement technology
INMETRO (option) Brasil
■■ Metrology, measurement technology
■■ Hazardous areas

NEPSI (option) China

Hazardous areas
KOSHA (option) South Korea
Hazardous areas
- PESO (option) India
Hazardous areas

1) Only for built-in transmitter

Approvals and certificates, see website

Ordering information
Model / Version / Measuring insert / Explosion protection / Process connection / Version and material of threaded connection /
Thread size / Measuring element / Connection method / Temperature range / Design of the sensor tip / Sensor diameter /
Insertion length A / Neck length N (MH) / Certificates / Options

© 2008 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.
The specifications given in this document represent the state of engineering at the time of publishing.
We reserve the right to make modifications to the specifications and materials.

WIKA data sheet TE 60.04 ∙ 04/2016 Page 5 of 5

04/2016 EN

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 30
63911 Klingenberg/Germany
Tel. +49 9372 132-0
Fax +49 9372 132-406
info@wika.de
www.wika.de