Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
180 views

Assignment No. 03 Chapter #27 Rolling Contact Bearings Problem # 01

The document contains 4 problems related to selecting and sizing ball bearings for different shaft applications based on load, speed, life, and reliability requirements. Problem 1 calculates the dynamic load rating of a bearing supporting a shaft with variable load over time. Problem 2 selects a bearing for a countershaft with a given load, speed, life, and reliability while accounting for operating and material factors. Problem 3 selects a single row deep groove ball bearing for given radial and axial loads and speed over a 5 year average life. Problem 4 determines the minimum dynamic load rating for a bearing with varying radial load over time to achieve a given life with less than 10% failures.

Uploaded by

Faris Ahmad
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
180 views

Assignment No. 03 Chapter #27 Rolling Contact Bearings Problem # 01

The document contains 4 problems related to selecting and sizing ball bearings for different shaft applications based on load, speed, life, and reliability requirements. Problem 1 calculates the dynamic load rating of a bearing supporting a shaft with variable load over time. Problem 2 selects a bearing for a countershaft with a given load, speed, life, and reliability while accounting for operating and material factors. Problem 3 selects a single row deep groove ball bearing for given radial and axial loads and speed over a 5 year average life. Problem 4 determines the minimum dynamic load rating for a bearing with varying radial load over time to achieve a given life with less than 10% failures.

Uploaded by

Faris Ahmad
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Assignment No.

03
Chapter #27 Rolling Contact Bearings
Problem # 01
A shaft rotating at constant speed is subjected to variable load. The bearings supporting the shaft
are subjected to stationary equivalent radial load of 3 kN for 10 per cent of time, 2 kN for 20 per
cent of time, 1 kN for 30 per cent of time and no load for remaining time of cycle. If the total life
expected for the bearing is 20 × 106 revolutions at 95 per cent reliability, calculate dynamic load
rating of the ball bearing.
Problem # 02
The rolling contact ball bearing are to be selected to support the overhung countershaft. The shaft
speed is 720 r.p.m. The bearings are to have 99% reliability corresponding to a life of 24 000
hours. The bearing is subjected to an equivalent radial load of 1 kN. Consider life adjustment
factors for operating condition and material as 0.9 and 0.85 respectively. Find the basic dynamic
load rating of the bearing from manufacturer's catalogue, specified at 90% reliability.
Problem # 03
Select a single row deep groove ball bearing for a radial load of 4000 N and an axial load of
5000N, operating at a speed of 1600 r.p.m. for an average life of 5 years at 10 hours per day.
Assume uniform and steady load.
Problem # 04
The ball bearings are to be selected for an application in which the radial load is 2000 N during
90% of the time and 8000 N during the remaining 10 per cent. The shaft is to rotate at 150 r.p.m.
Determine the minimum value of the basic dynamic load rating for 5000 hours of operation with
not more than 10 per cent failures.

You might also like