Professional Documents
Culture Documents
Bcqs For DR Dost Baloch
Bcqs For DR Dost Baloch
Key:a
a. Upper anterior artificial teeth should be set into positions similar to that previously occupied by
natural teeth.
Key:a
a. if non anatomical flat plane teeth have been used ,maxillary posterior
c. balanced occlusion eliminates deflective occlusal contact on the balancing side by providing
better occlusion
demand
Key:b
4. Edentulous patient came to the department of prosthodontics for the rehabilitation. He is provided
with the complete upper and lower denture. After 48hours he came with the ulcers under upper and
lower denture. What is the most common cause of ulcer and abrasion under denture base is
b. Improper occlusion
Ans b
a. Ridge height
d. vestibular depth
Ans c
a. Mucostatic
b. Low pressure
c. Selective pressure
d. Mucocompressive
Ans. c
a. Masseter
b. Temporalis
c. Buccinator
d. Lateral pterygoid
key:a
8: During the lateral movement, the mandible shifts by 1 to 4mm towards the working side .This
movement is known as ………
a. Bennett movement
b. Bennett angle
key:a
9. While recording the Maxillomandibular relationship kinematic face bow was used .Which feature
favours kinematic face bow from arbitrary face bow:
b. it is simple instrument
Key :a
10: A 50 yrs old male patient came to dental OPD with Complain of cheek biting, difficulty in swallowing
and speech, pain and clicking of teeth. After examining the dentist came to know his complete denture
has:
Ans=b
d. Non arcon
Key: c
12: During the construction of complete denture the teeth should be arranged where the forces of
buccal musculature are compensated by lingual musculature:
a. Mediolus
b. zone of equilibrium
c. neutral zone
d. arch from
Ans =c
a. Masseter
b. Temporalis
c. Lateral pterygoid
d. Geniohyoid
Key: a
bicuspid
d.Incisive papilla can also be used to assess the inclination of the posterior teeth
Key: a
15. Final year student taking final impression of upper edentulous arch which structure will be the
distal palatal terminator of upper complete denture?
a .Tuberosity
b. Vibrating line
c. Fovea palatine
d. Maxillary tori
Ans = a
Ans= b
17. During the lab procedure, after taking the final impression the functional width and depth of the
sulcus is recorded. Preservation of margin is done by:
a. proper pouring
b. beading
c. boxing
d. indexing
Ans=c
spacer of 3mm was given. Which is the most likely material to be used
a. Impression plaster
c. Impression compound
d. Alginate
Ans. d
19-A final year student made a complete denture with no compensatory curves. The incorporation of
these curves during setup of teeth is important since they provide:
a. Stability
b. Retention
d. non-working contact
key: a
20. Final year student got edentulous patient for rehabilitation which material is considered least
favourable for temporary base plate:
a. Wax
b. Thermoplastic material
d. Cast metal
ANS: d
21. Regarding wax base plate, the least likely statement is:
ANS: b
22. During the fabrication of implant supported denture certain features are taken under consideration
when comparing implants with teeth. All features are similar in implants except:
a. proprioception
c. immobile
d. cannot be intruded and extruded
key= a
key: a
24. A 40years old patient came to dental opd with complain of missing teeth in upper and lower arch. He
wants replacement of missing teeth by a removable prosthesis. Examination reveals right and left upper
premolars with marked gingival recession .The patient is not willing for the extraction. What is the
treatment of choice for this patient?
c. overdenture
Ans= c
25. In treatment plan, canine were taken under consideration as abutments for overdentures because:
Ans= a
26: During the mandibular border moulding which movement is made to record the width of anterior
lingual border of mandible:
a. Tell the patient to open wide and closes against the hand on the chin
Ans =c
27. Student is taking impression of edentulous patient what instruction he would give his patient for
moulding of coronoid process:
Ans. d
28. How much scoring the cast of the cast required in depth at the demarcated vibrating line is to
achieve posterior palatal seal
a. 0.5mm
b. 01mm
c. 1.5mm
d. 2.0mm
Key: c
29: Green stick is commonly used for recoding secondary impression according to classification it is
what type of compound
b. low fusing
d. high fusing
Ans.b
Ans c
31. The clinical picture of oral mucosa in patient with burning mouth
syndrome usually
a. Inflamed
b. Healthy
c. Traumatized
d. Atrophic
Ans. b
32. A sequala of excessive load on the residual ridge and the unstable
a. Hyperplasia
b. stomatitis
c. Traumatic ulcers
d. Flabby ridge
Ans.d
a. Genioglosis muscle
b. Mylohyoid muscle
c. Styloglosis muscle
d. Geniohyoid muscle
Key:b
by
a. Perform proper cheek movements according to
Key:d
35. The excessive thickness of impression material over the fitting surface of
Ans:c
a. Consonants
b. Vowels
c. Affricative consonants
d. Fricative consonants
key b
37. The space which is formed between occlusal vertical dimension and the rest vertical dimension is
a. Vertical space
b. Occlusal space
c. Freeway space
d. Inter-dental space
38. The patient’s tactile sense can be used as a guide for the determination
of the:
c. Freeway space
Ans: b
40. Use of phonetic sounds like ch, s and j may be used to record
d. Vertical dimension
41. Maxilla
Ans. b
Ans. a
43.51 yr old HR MANAGER came to the prosthodontic deptt.with Kennedy class II in upper arch and
Kennedy class I in lower arch .Grade III mobility of upper anteriors was observed .Patient was willing for
the extraction of mobile teeth .What is the treatment of choice for this patient ?
d. overdenture
Ans = a
44. Dentist want to take maxillary area impression, he selected irreversible hydrocolloid impression
material. While viewing its ingredients he got to know that potassium titanium fluoride is used
as………….;
a. accelerator
b. retarder
c. activator
d. reactor
Ans=a
45. A wax spacer of 2 mm was given during the fabrication of custom tray for secondary impression
.Most likely material for final impression is:
a. alginate
c. impression compound
d. condensation silicones
Ans=b