The HBE-CW is a high build liquid coating designed for cold weather applications down to -20°C. It cures quickly when applied to cold substrates or in cold ambient temperatures without external heat. It can be used to coat pipeline field joints, valves, and fittings or for repairing FBE coatings on pipelines. It provides superior corrosion resistance and allows for a fast cure time and efficient installation process.
The HBE-CW is a high build liquid coating designed for cold weather applications down to -20°C. It cures quickly when applied to cold substrates or in cold ambient temperatures without external heat. It can be used to coat pipeline field joints, valves, and fittings or for repairing FBE coatings on pipelines. It provides superior corrosion resistance and allows for a fast cure time and efficient installation process.
The HBE-CW is a high build liquid coating designed for cold weather applications down to -20°C. It cures quickly when applied to cold substrates or in cold ambient temperatures without external heat. It can be used to coat pipeline field joints, valves, and fittings or for repairing FBE coatings on pipelines. It provides superior corrosion resistance and allows for a fast cure time and efficient installation process.
The HBE-CW is a high build liquid coating designed for cold weather applications down to -20°C. It cures quickly when applied to cold substrates or in cold ambient temperatures without external heat. It can be used to coat pipeline field joints, valves, and fittings or for repairing FBE coatings on pipelines. It provides superior corrosion resistance and allows for a fast cure time and efficient installation process.
temperature applications The HBE-CW is an advanced liquid coating specifically designed for cold weather application. The high build formulation is capable of curing fast when applied to colder substrates at colder ambient temperatures – even down to subzero conditions of -20°C (-4°F). Applied to bare steel, the HBE-CW coating is used for protection of pipeline field joint girth welds, valves and fittings, as a holiday repair material on FBE coated mainline pipe or for pipeline coating rehabilitation.
Cures in the Winter Applications
• The HBE-CW coating will cure in the Winter season without the requirement of external heat. Just apply it and leave it. No Oil & Gas preheating or post heating necessary. Superior Corrosion Resistance • Canusa’s HBE-CW coating has proven to outperform Repair & Rehab competitive equivalents in a variety of different test methods including cathodic disbondment, hot water soak and impact resis- tance. Low Temperature Saves Time • The fast cure formulation allows for quick handling and quick backfilling for an efficient end-to-end coating process. High Build in Single Coat • A single pass application direct-to-metal will achieve a high igh build coating thickness of 20-40 mils (500-1000 microns) Variety of Uses • Field joint girth welds, valves and fittings, holiday repair material on FBE mainline pipe, pipeline rehabilitation or new construction.
PRODUCT DATA SHEET canusacps.com
The product information shown here is intended as a
HBE-CW guide for standard products.
Consult your Canusa
representative for specific High build liquid coating for low temperature projects or unique applications applications.
Performance All performance testing followed CSA-Z245.20-10 unless specified.
Service Temp. Up to 65°C (150°F)
Typical Thickness > 25 mils (635 microns) Mixing Ratio 12.5:1 (by volume) Percent Solids 100% Base: 1.45 Specific Gravity Cure: 1.58 Hardness (ASTM D2240) > 87 Shore D Adhesion to Steel (ASTM D4541) 3200 psi Adhesion to FBE (ASTM D4541) 3000 psi Cathodic Disbondment @ 28 days, 23°C 4.1 mm Canusa-CPS Cathodic Disbondment @ 28 days, 50°C 10.0 mm A division of Shawcor Ltd. Impact Resistance @ 0°C > 3.0 J Head Office Impact Resistance @ -40°C > 3.0 J 25 Bethridge Road Toronto, ON, Canada M9W 1M7 Hot Water Immersion @ 28 days, 50°C Rating 1 Tel: +1 416 743 7111 Fax: +1 416 743 5927 Hot Water Immersion @ 28 days, 65°C Rating 1 Canada Hot Water Immersion @ 28 days, 95°C Rating 1 Dome Tower St. 2200, 333-7th Avenue SW Calgary, AB, Canada T2P 2Z1 Minimum Curing Temperature (Surface) -20°C Tel: +1 403 218 8207 6 months when stored in original packaging be- Fax: +1 403 264 3649 Shelf Life tween 0.5°C – 27°C. Americas Pot Life/Gel Time (100 g Sample) 5875 N. Sam Houston Pkwy W., Suite 200 Houston, TX, USA 77086 Pot Life/Gel Time @ 23°C (73°F) 13 minutes Tel: +1 281 886 2350 Fax: +1 281 886 2353 Pot Life/Gel Time @ 0°C (32°F) 35 minutes Middle East Pot Life/Gel Time @ -10°C (14°F) 55 minutes ADPC - Mussafah Port, P.O. Box 2621 Abu Dhabi, UAE Pot Life increases as temperature decreases Tel: +971 2 496 3500 Fax: +971 2 496 3501 Typical Kit Size Required by Pipe Diameter1 Europe, Africa & Russia 4.5” – 26” 0.8 Liter Kit Dellaertweg 9-E, Gebouw “Le Carrefour” 28” to 50” 1.5 Liter Kit 2316 WZ Leiden, The Netherlands (NL) Tel: +31 71 80 802 70 1 Based on 400 mm coating width, 25 mils (635 micron) average thickness and 50% wastage factor. Fax: +31 71 80 802 71 Asia-Pacific 101 Thomson Road, #11-03 United Square 307591 Singapore Tel: +65 6749 8918 Safety Fax: +65 6749 8919
Handle with care. Before and during use, observe all safety labels on packaging Quality Management system containers, consult with Canusa-CPS Material Safety Data Sheets and abide by all registered to ISO 9001 local or national safety regulations. Canusa warrants that the product conforms to its chemical and physical description and is appropriate for the use stated on the product data sheet when used in compliance with Canusa’s written instructions. Since many installation factors are beyond our control, the user shall determine the suitability of the products for the intended use and assume all risks and liabilities in connection therewith. Canusa’s liability is stated in the standard terms and conditions of sale. Canusa makes no other warranty either expressed or implied. All information contained in this data sheet is to be used as a guide and is subject to change without notice. This data sheet supersedes all previous data sheets on this product. E&OE Since 1967, Canusa-CPS has been a leading developer and manufacturer of specialty pipeline coatings for the sealing and corrosion protection of pipeline joints and other substrates. Canusa-CPS high PDS_HBE-CW_rev017 performance products are manufactured to the highest quality standards and are available in a number of configurations to accommodate many specific project applications.
