PRODUCT DATA SHEET

Sikalastic®-8800
LIQUID APPLIED PURE POLYUREA MEMBRANE

DESCRIPTION SUSTAINABILITY
Sikalastic®-8800 is a two part, elastic, 100 % solids, ▪ Conformity with LEED v4 MRc 2 (Option 1): Building
very fast curing and coloured pure polyurea liquid ap- Product Disclosure and Optimization – Environment-
plied membrane with good chemical resistance. al Product Declarations
Suitable for use in hot and tropical climatic conditions. ▪ Conformity with LEED v2009 IEQc 4.2: Low-Emitting
Materials - Paints and Coatings
USES
APPROVALS / CERTIFICATES
Sikalastic®-8800 may only be used by experienced pro-
fessionals. ▪ Coating for concrete protection according the re-
On concrete quirements of EN 1504 - 2: 2004, DoP
▪ Abrasion resistant protective coating in industrial and 0206070100100000271008, certified by FPC Notified
manufacturing facilities Body and provided with CE-Marking
▪ Waterproofing for cut and cover structures ▪ Geoscope GmbH, project No. 131303A, 2013, De-
▪ Waterproofing for submersed structures termination of the durability of the synthetic mem-
▪ Waterproofing on walkways and balconies brane Sikalastic-8800 in an autoclave, based on DIN
▪ Waterproofing on floors and car park decks EN ISO 13438
▪ Water retaining structures in power plants ▪ Eurofins Product Testing A / S, report No.
▪ Secondary containment structures G23435_Ver2 / BJ1, 2013, Determination of the over-
▪ Tank, bund and pit lining in sewage and waste water all migration and migration of isocyanates according
treatment plants to EN 1186 and EN 14338
On steel ▪ KIWA Polymer Institut GmbH, report No. P8331 - E,
▪ Truck bed lining 2013, Testing of static and dynamic crack bridging
▪ Waterproofing and wearing layer on steel ridges ability in accordance with DIN EN 1062 - 7, as well as
bond strength after freeze-thaw-cycling with de-icing
CHARACTERISTICS / ADVANTAGES salt immersion and after thundershower cycling ac-
cording DIN EN 13687-1 and -2, in combination with
▪ Very fast reactivity and curing time Sikafloor®-156
▪ Almost immediate return-to-service time ▪ KIWA Polymer Institute GmbH, report No. P8395,
▪ Excellent crack bridging properties 2013, Testing of the root resistance according DIN
▪ Good chemical resistance 4062
▪ Excellent abrasion resistance ▪ KIWA Polymer Institute GMBH, report No. P92787 - 1
▪ UV light exposure may lead to yellowing - E, Tests on a coating system in accordance with test
category OS 11 / A, according DIN V 18026 in accord-
ance with EN 1504 - 2.
▪ Sikalastic®-8800 complies with the requirement of
specification BS 6920: Part 2 & 3 2000 Cl. 2.2 & 2.3
(Suitability of non-metallic products for use in con-
tact with water intended for human consumption
with regard to their effect on the quality of the wa-
ter)

Product Data Sheet

Sikalastic®-8800
August 2018, Version 04.02
020702050010000019

1/4
PRODUCT INFORMATION
Chemical base Pure Polyurea

Packaging Part A (Isocyanate) 212 kg drums ~189 L

Part B (Polyamine) 191 kg drums ~189 L

Appearance / Colour Part A Clear

Part B Grey
Standard colour approximately RAL 7012, basalt grey.
Grey, approximately RAL 7004 on request.
Shelf life Part A 12 months
Part B 12 months

Storage conditions From date of production if stored properly in closed, sealed and undam-
aged packaging in dry conditions at temperatures between +5 °C and +30
°C. Protect from direct sunlight.
Density Part A ~1.12 kg/l
Part B ~1.01 kg/l
Density values determined at +20 °C
Solid content ~99 %
Viscosity Temperature Part A Part B
+20 °C 900 - 1300 mPas 600 - 850 mPas
+25 °C ~750 mPas ~500 mPas

TECHNICAL INFORMATION
Shore D Hardness > 50 (DIN 53505)

Mechanical Resistance 0 mg CS-17 / 1000 g / 1000 cy (ISO 5470-1)

Tensile Strength ~20 N/mm² (DIN 53504)

Elongation at Break ~400 % (DIN 53504)

Crack Bridging Ability Class A5 Static (DIN EN 1062-7)

Class B4.2 Dynamic (DIN EN 1062-7)

Chemical Resistance Sikalastic®-8800 is resistant to de-icing salts, bitumen, alkalis, fresh- and
ground water and various chemicals. Contact Sika technical service for spe-
cific information.

APPLICATION INFORMATION
Mixing Ratio Part A : Part B = 1 : 1 (volume)
Consumption ~1.05 kg/m²/mm
Layer Thickness > 1.5 mm Dampproofing (not UV exposed /
Hard landscape)
> 2 mm Fully submerged or UV exposed or
soft landscape areas
For further information contact Sika Technical Department. All properties
have been tested with a minimum layer thickness of 2 mm.
Product Temperature > +65 °C
Ambient Air Temperature -20 °C min. / +40 °C max.
Relative Air Humidity < 85 %

Product Data Sheet

Sikalastic®-8800
August 2018, Version 04.02
020702050010000019

2/4
Substrate Temperature -20 °C min. / +50 °C max.
≥ 3 °C above dew point, beware of condensation
Curing Time 24 h at +20 °C
Gel time ~11 sec at +20 °C
Waiting Time / Overcoating 1 to 2 min at +20 °C

APPLICATION INSTRUCTIONS CLEANING OF EQUIPMENT

Dose and mix with a suitable air driven or electrical Clean all tools with Thinner C immediately after use.
plural component heated spray equipment. Both com- The application equipment has to cleaned and filled
ponents must be heated up to +70°C. The accuracy of with Mesamoll. Hardened and/or cured material can
mixing and dosage must be controlled regularly with only be removed mechanically.
the equipment. Thoroughly stir part B (Amine) using a
drum stirrer until a homogenous colour is obtained. IMPORTANT CONSIDERATIONS
SUBSTRATE QUALITY ▪ Application by using a 2-component hot spray equip-
ment. For more detailed information please refer to
The concrete substrate must be sound and of suffi- the Method Statement Sikalastic®-8800 provided by
cient compressive strength (minimum 25 N/mm2) with Sika Technical Department.
a minimum pull off strength of 1.5 N/mm2. ▪ Sikalastic®-8800 is not resistant to biogenic sulphuric
The substrate must be clean, dry and free of all con- acid.
taminants such as dirt, oil, grease, coatings and sur- ▪ Service temperatures: Performs in constant dry tem-
face treatments, etc. Concrete substrates must be pre- peratures from -30 °C to +100 °C
pared mechanically using abrasive blast cleaning or ▪ Service temperatures: Performs in continuous im-
scarifying equipment to remove cement laitance and mersion at maximum average temperatures +50°C
achieve an open textured surface.
Weak concrete must be removed and surface defects BASIS OF PRODUCT DATA
such as blow holes and voids must be fully exposed.
Repairs to the substrate, filling of blowholes/voids and All technical data stated in this Data Sheet are based
surface levelling must be carried out using appropri- on laboratory tests. Actual measured data may vary
ate products from the Sikafloor®, Sikadur®, Sika® due to circumstances beyond our control.
Monotop®, SikaRep® and Sikagard® range of materials.
All dust, loose and friable material must be com- LOCAL RESTRICTIONS
pletely removed from all surfaces before application of
the product, preferably by brush or vacuum. Note that as a result of specific local regulations the
declared data and recommended uses for this product
SUBSTRATE PREPARATION may vary from country to country. Consult the local
Product Data Sheet for the exact product data and
The surface must be sound, of sufficient strength, uses.
clean, dry and free of dirt, oil, grease and other con-
tamination.
All substrate must be primed or mechanically cleaned.
Grinding may be necessary to level the surface. Suit-
able substrates are, for example Concrete, bituminous
felts.
For detailed information regarding substrate prepara-
tion and primer chart please refer to Method State-
ment.
Substrate Pre-Treatment Substrate Primer
Cementitious substrates Sikafloor®-161 lightly
broadcast with quartz
sand, 0.3 – 0.8 mm, for
example Sikadur®-507
For the consumption rates and waiting time / overcoating please refer to the
PDS of the appropriate primer. Other substrates must be tested for their com-
patibility. If in doubt, apply a test area first.

Product Data Sheet

Sikalastic®-8800
August 2018, Version 04.02
020702050010000019

3/4
ECOLOGY, HEALTH AND SAFETY
For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
to the most recent Safety Data Sheet (SDS) containing
physical, ecological, toxicological and other safety-re-
lated data.

LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.

SIKA NORTHERN GULF SIKA SOUTHERN GULF SIKA SAUDI ARABIA

Bahrain / Qatar / Kuwait UAE / Oman / SIC Riyadh / Jeddah / Dammam
Tel: +973 177 38188 Tel: +971 4 439 8200 Tel: +966 11 217 6532
sika.gulf@bh.sika.com info@ae.sika.com info@sa.sika.com
gcc.sika.com gcc.sika.com gcc.sika.com

Sikalastic-8800-en-AE-(08-2018)-4-2.pdf

Product Data Sheet

Sikalastic®-8800
August 2018, Version 04.02
020702050010000019

4/4