Onshore Product Reference Guide PDF

Product Reference Guide
2018 Rev.1
Onshore
Technical Marketing
MASTS AND SUBSTRUCTURES POWER GENERATION
4. Masts and Substructures - Ideal Series 26. Compact Drive Systems
5. Masts and Substructures - Signature Series
6. Masts and Substructures - Velocity Series DRILLING CONTROLS AND INSTRUMENTATION
7. Masts and Substructures - Custom Terrain Series 30. Pharos™ sheet 1 & 2
32. Amphion™
8. Steel Toe Walking System
PRESSURE CONTROL EQUIPMENT
DRILL FLOOR EQUIPMENT 34. 6012 BOP
10. Onshore Top Drives 35. LXT BOP
11. BX-Elevators 36. SBOP
12. X-Series Manual Side Door Elevators
PUMPING AND CIRCULATION
13. Manual Single Joint Elevators
14. Elevator/Spider and FMS Flush Mounted Slips 38. 12-P-160 Triplex Mud Pump
39. Brandt Centrifuges
15. Power Slips
40. Brandt Shakers
16. Rotary Support Table 41. Brandt Shaker screens
17. High Pressure Manifolds 42. Brandt Agitators
18. Onshore Roughnecks
REFERENCE
19. Stand Transfer Vehicle (STV) & PipeCat
43. Engineering Tables
DRAWWORKS
22. ADS Drawworks
23. DSGD-375 & SSGD-250
rig@nov.com | www.nov.com
Masts and Substructures
4. Masts and Substructures - Ideal Series
5. Masts and Substructures - Signature Series
6. Masts and Substructures - Velocity Series
7. Masts and Substructures - Terrain Series
8. Steel Toe Walking system
rig@nov.com | www.nov.com | pg. 3

Technical Marketing Sheet
Masts and Substructures - Sheet 1 of 4 *For reference only, please contact your local sales contact for more information.
The Ideal™ Series

The Ideal™ Rig Series defines reliability and versatility. This versatile series with
straight-leg mast design includes some of our most popular, field-proven rigs.
Comprised of the Ideal, Ideal Prime, Drake and Ideal Box Rigs, the Ideal™ Series
has evolved alongside the drilling industry to accommodate a wide array of
your drilling demands, integrating improvements in technology and
engineering with proven designs and equipment.
Notes
• Ideal Rig base box measurement excludes attached Drawworks Skid Base
and pin-on Steel Toe™ walking foot, pinned to V-door side of substructure
base box.
• The Ideal Prime base box measurement excludes pin-on Steel Toe™ walking
foot, pinned to V-door side of substructure base box.
Dimensions
Ideal Series units A B C D E F G H
Ideal Rig 52'-5" 34'-3" 18'-2" 21'-8" 25'-0" 85'-0" 142'-0" 167'-0"
meters 15.97 10.44 5.53 6.6 7.62 25.91 43.28 50.9
Ideal Box 55'-0" 36'-0" 19'-0" 21'-8“ to 31’-8” 25'-0" to 35'-0" 85'-0" 142'-0" 167'-0" to 177'-0"
meters 16.76 10.97 5.79 6.6 7.62 to 10.67 25.91 43.28 50.90 to 53.95
Ideal Prime 62'-11" 42'-5" 20'-6" 23'-0" 28'-0" 85'-0" 142'-0" 170'-0"
meters 19.17 12.92 6.25 7.01 8.53 25.91 43.28 51.81
Drake Rig 46'-8" 34'-2 12'-6" 18'-0" 22'-0" 85'-0" 136'-0" 158'-0"
meters 14.22 10.41 3.81 5.49 6.71 25.91 41.45 48.16
Conventional Substructures and Drilling Masts — Ideal™ Series

Rig Model units AC Ideal Rig Ideal Box Ideal Prime Drake Rig
Hook Capacity ton 375 375 375 250
metric ton 340.2 340.2 340.2 226.8
Mast type Cantilever (Straight Leg) Cantilever (Straight Leg) Cantilever (Straight Leg) Cantilever (Straight Leg)
Mast Height 142'-0" 142'-0" 142'-0" 136'-0"
m 43.3 43.3 43.3 41.5
Base Width 12'-0" 12'-0" 21'-0" 20'-0"
m 3.66 3.66 6.4 6.1
Raising Method type Cylinder Raised Cylinder Raised Cylinder Raised Cylinder Raised
Drawworks model ADS-10SD ADS-10SD DSGD-375 DSGS-375
(# of lines) (12) (12) (12) (8)
Substructure type Slingshot Cylinder Box-on-Box Slingshot Cylinder Slingshot Cylinder
Pipe Set-Back Capacity lb 500,000 500,000 575,000 350,000
ton 250 250 287.5 175
metric ton 226.8 226.8 260.8 158.8
Casing Capacity lb 750,000 750,000 750,000 500,000
ton 375 375 375 250
metric ton 340 340 340 226.8
Pipe Racking Capacity (Stands) stands 5" DP: (208) 5" DP : (208) 5" DP: (224) 5" DP: (144)
8" DC: (8) 8" DC: (8) 8" DC: (6) 8" DC: (6)
Floor Height 25 25, 28, 30, or 35 28 22
m 7.6 7.6, 8.5, 9.1 or 10.6 8.5 6.7
Cellar/Clearance Height 21'-8" 24’-0” (based on 28’ drill floor) 24'-0" 18'-0"
m 6.6 7.3 7.3 5.4
Rotary Table Opening in 37½” 37½” 37½” 37½”
Standard Crown Sheave Groove in 1⅜" 1⅜" 1⅜" 1¼"
Sheaves on Cluster * # 5 5 5 3
*Fastline and Deadline sheaves not included
©National Oilwell Varco - All rights reserved - RigDoc 100496778

Page 4 rig@nov.com nov.com
The Signature Series

The Signature Series Rigs are built to specific market requirements and your
unique needs. Products of many engineering hours, these rigs are configured
to operate optimally in geographic arenas with stringent regulations or
unrelenting, rugged environments. Examples include the European, Middle
East, Mono-Transit, and SEAM rigs.
Notes
• Racking board height can be adjusted within a range of dimension F so as to

accommodate varying stand heights.
Dimensions
Signature Series units A B C D E F G H
SEAM 1000 49'-6" 37'-2" 12'4" 21'-8" 25'-0" 85'-0" 142'-0" 167'-0"
meters 15.09 11.33 3.76 6.60 7.62 25.91 43.28 50.90
SEAM 1500 57'-4" 29'-7" 27'-9" 26'-8" 30'-0" 85'-0" 142'-0" 172'-0"
meters 17.48 9.02 8.46 8.13 9.14 25.91 43.28 52.42
SEAM 2000 54'-7" 42'-2" 12'-5" 26'-8" 30'-0" 85'-0" 142'-0" 172'-0"
meters 16.63 12.85 3.78 8.13 9.14 25.91 43.28 52.42
European 1500 57'-4" 29'-7" 27'-9" 26'-8" 30'-0" 85'-0" 142'-0" 172'-0"
meters 17.48 9.02 8.46 8.13 9.14 25.91 43.28 52.42
European 2000 54'-7" 42'-2" 12'-5" 26'-8" 30'-0" 85'-0" 142'-0" 172'-0"
meters 16.63 12.85 3.78 8.13 9.14 25.91 43.28 52.42
ME 1500 62'-6" 42'-0" 20'-6" 25'-0" 30'-0" 85'-0" 152'-0" 182'-0"
meters 19.05 12.80 6.25 7.62 9.14 25.91 46.33 55.47
ME 2000 DC 60'-0" 46'-8" 13'-4" 30'-0" 35'-0" 86'-4" 156'-0" 191'-0"
meters 18.28 14.22 4.06 9.14 10.67 26.31 47.55 58.22
ME 2000 AC 60'-0" 46'-8" 13'-4" 30'-0" 35'-0" 86'-4" 156'-0" 191'-0"
meters 18.28 14.22 4.06 9.14 10.67 26.31 47.55 58.22
ME 2000 74'-2" 49'-8" 24'-6" 39'-10" 45'-0" 87'-6" 160'-0" 205'-0"
meters 22.61 15.14 7.47 12.14 13.72 26.67 48.77 62.49
Mono Transit 61'-2" 30'-10" 30'-4" 16'-0" 20'-0" 85'-0" 142'-0" 162'-0"
meters 18.65 9.40 9.25 4.88 6.10 25.91 43.28 49.38
Conventional Substructures and Drilling Masts — Signature Series

Rig Model units SEAM 1000 SEAM 1500 SEAM 2000 European European ME 1500 ME 2000 DC ME 2000 AC ME 3000 Mono-Transit
1500 2000
Hook Capacity ton 250 350 500 350 500 412.5 500 500 777.5 375
metric ton 226.8 317.5 453.6 317.5 453.6 374.2 453.6 453.6 705.3 340.2
Mast type Cantilever Cantilever Cantilever Cantilever Cantilever Cantilever Cantilever Cantilever Cantilever Cantilever
Mast Height 142'-0" 142'-0" 142'-0" 142'-0" 142'-0" 152'-0" 157'-0 157'-0" 160'-0" 142'-0"
m 43.3 43.3 43.3 43.3 43.3 46.3 47.85 47.85 47.9 43.3
Base Width 21'-0" 21'-0" 25’-0” 21’-0” 25’-0” 25’-0” 30'-0" 30'-0" 30'-0" 12’-6”
m 6.40 6.40 7.62 6.40 7.62 7.62 9.14 9.14 9.14 3.81
Raising Method type Sling-Line Sling-Line Sling-Line Sling-Line Sling-Line Cylinder Raised Cylinder Raised Cylinder Raised Sling-Line Cylinder Raised
Drawworks model DSGD-250 DSGS-375 DSGS-500 DSGS-375 DSGD-500 110-UDBE 1320-UDBE ADS-10SD ADS-30D DSGD-375L
(# of lines) (8) (8, 10, 12) (8, 10, 12) (8, 10, 12) (8, 10, 12) (12) (12) (12) (14) (8, 10, 12)
Substructure type Slingshot Slingshot Slingshot Slingshot Slingshot Slingshot Slingshot Slingshot Slingshot 1 Piece
Winch Winch Winch Winch Winch Cylinder Cylinder Cylinder Winch Telescoping
Pipe Set-Back Capacity lb 325,000 500,000 500,000 500,000 600,000 550,000 800,000 800,000 1,000,000 460,000
ton 162.5 250 250 250 300 275 400 400 500 230
metric ton 147.4 226.8 226.8 226.8 330.7 294.4 362.9 362.9 453.6 208.7
Casing Capacity lb 450,000 700,000 950,000 700,000 950,000 750,000 1,000,000 1,000,000 1,500,000 700,000
ton 225 350 475 350 475 375 500 500 750 350
metric ton 204.1 317.5 430.9 317.5 430.9 340.1 453.5 453.5 680.3 317.5
Pipe Racking Capacity stands 5” DP: (180) 4½” DP: (132) 5” DP: (196) 5” DP: (180) 4½” DP: (132) 5" DP: (190) 5/5½" DP: (285) 5/5½" DP: (285) 5½" DP: (264) 5” DP: (196)
6½” DC: (8) 6½” DC: (8) 8¼” DC: (8) 6½” DC: (8) 6½” DC: (8) 6½” DC: (8) 8” DC: (8) 8” DC: (8) 10” DC: (9) 8” DC: (8)
10” DC: (2) 8¼”DC: (6) 9½” DC: (4) 9½” DC: (4) 14” DC: (1)
10” DC: (2)
Floor Height 25'-0" 30'-0" 30'-0" 30'-0" 30'-0" 30'-0" 35'-0" 35'-0" 45'-0" 30'-0"
m 7.62 9.14 9.14 9.14 9.14 9.1 10.6 10.6 13.7 9.1
Cellar/Clearance Height 21'-0 26'-0 26'-1 n.a. n.a. 25'-0" 30'-0" 30'-0" 35’-0” 17’-7”
m 6.4 7.92 8.92 n.a. n.a. 7.6 9.1 9.1 10.6 5.3
Rotary Table Opening in 37½” 37½” 37½” 37½” 37½” 37½” 37½” 37½” 47½” 37½”
Standard Crown Sheave Groove in 1¼” 1⅜” 1½” 1⅜” 1½” 1⅜" 1½" 1½" 1⅝” 1¼”
Sheaves on Cluster* # 5 6 6 6 6 6 6 6 7 6

Custom Terrain Series

The Custom Terrain Series Rigs are purpose-built to perform in demanding
terrains and extreme temperature environments. With designs ranging from
arctic, desert, heli, and train applications, these rigs continue drilling downhole
no matter the conditions above ground.
Notes
•
information.
Dimensions
Terrain Series units A B C D E F G H
Desert Rig 62'-6" 42'-0" 20'-6" 25'-0" 30'-0" 85'-0" 152'-0" 182'-0"
meters 19.05 12.80 6.25 7.62 9.14 25.91 46.33 55.47
Arctic Box 86'-9" 37'-10" 48'-11" 26'-8" 30'-0" 85'-0" 142'-0" 172'-0"
meters 26.44 11.53 14.91 8.13 9.14 25.91 43.28 52.42
Train Prime 57'-1" 39'-0" 18'-1" 31'-10" 36'-0" 85'-0" 142'-0" 178'-0"
meters 17.40 11.89 5.51 9.70 10.97 25.91 43.28 54.25
Heli Rig 61'-2" 39'-7" 21'-7" 20'-4" 25'-0" 85'-0" 142'-0" 167'-0"
meters 18.64 12.06 6.58 6.20 7.62 25.91 43.28 50.90
Conventional Substructures and Drilling Masts — Terrain Series

Rig Model units Desert Rig Arctic Rig Train Rig Heli Rig
Hook Capacity ton 250 to 750+ 250, 350, or 500 250 to 750+ 250
metric ton 226.79 to 680.38+ 226.79, 317.5, or 453.5 226.79 to 680.38+ 226.79
Mast type Telescopic or Cantilever Telescopic or Cantilever Cantilever Cantilever
Mast Height 127'-0"+ 120'-0"+ 127'-0"+ 142'-0"
m 38.71+ 36.58+ 38.71+ 43.28
Base Width 15'-0" to 33'-0" 25'-0" (based on 350 and 375 ton) 25'-0" (based on 350 ton) 21'-0"
m 4.57 to 10.06 7.62 (based on 350 and 375 ton) 7.62 (based on 350 ton) 6.4
Raising Method type Cylinder/Sling-line Cylinder/Sling-line Cylinder/Sling-line Cylinder/Sling-line
Drawworks model 1320-UDBE SSGD-360 DSGS-375 D700
(# of lines) (10 to 14) (12) (12) (12)
Substructure type Slingshot-Cylinder/Winch/Drawworks Slingshot-Cylinder/Winch Slingshot-Cylinder/Winch Slingshot-Cylinder/Winch/Drawworks
Pipe Set-Back Capacity lb 250,000 to 700,000 250,000 to 600,000 350,000 or 575,000 -
ton 125 to 350 125 to 300 175 or 287.5 -
metric ton 113.4 to 317.5 113.4 to 272.1 158.7 or 260.8 -
Casing Capacity lb 400,000 to 1,500,000 750,000 700,000 600,000
ton 200 to 750 375 350 300
metric ton 226.7 to 680.3 340.1 323.8 272.1
Pipe Racking Capacity stands 3½ to 5½" DP: (140-270) 5" DP: (200) 5" DP: (180) 5" DP: (178)
8½ to 9½” DC: (up to 9) 6¾” DC: (22) 7” DC: (12) 10” DC: (8)
8” DC: (8)
Floor Height 20'-0" to 30'-0" 20'-0" or 35'-0" 25'-0" or 30'-0" 20'-0" or 25'-0"
m 6.1 to 9.1 6.1 or 10.6 7.6 or 9.1 7.6 or 9.1
Cellar/Clearance Height 19'-0" to 38'-0" 25'-6" 22'-0" Up to 20'-4"

m 5.7 to 11.5 7.7 6.7 6.1
Rotary Table Opening in 27½" 37½" 37½" 27½"
Standard Crown Sheave Groove in 1⅛” to 1¾” 1¼” to 1⅜” 1⅜" (based on 350 ton) 1⅛"
Sheaves on Cluster* # 5 to 7 6 6 (based on 350 ton) 6

The Velocity™ Series
fewer transport loads, allowing for quick transport between rig sites. The
Velocity Series sets the standard for speed.
Notes
• All Velocity Series rigs are equipped with pipe handling systems which
eliminate the need for a racking board and setback area.
Dimensions
Velocity Series units A B C D
Rapid Rig 36’-10” 30’-06” 6’-4” 18’-0”
meters 11.23 9.30 1.93 5.49
Vertical Slant
20’-6” 19’-4” 1’-2” 12’-6”
(VSR)
meters 14.22 10.41 3.81 5.49
units E F G H
Rapid Rig 20’-0” 80’-0” 100’-0” 167'-0"
meters 6.10 24.38 30.48 50.9
Vertical Slant
14’-0” or 20’-0” 76’-0” 90’-0” or 96’-0” 167'-0" to 177'-0"
(VSR)
meters 6.71 25.91 41.45 48.16
Conventional Substructures and Drilling Masts — Velocity Series

Rig Model units Rapid Rig Vertical Slant (VSR)
Hook Capacity ton 250 100 or 150
metric ton 226.79 90.71 or 136.07
Mast type Telescopic Telescopic
Mast Height 80'-0" 75'-4
m 24.38 23.16
Base Width 7'-0" 6’-4”
m 2.13 1.93
Raising Method type Cylinder Raised Cylinder Raised
Drawworks model SSGD-250 D700AC
(# of lines) (8) (6)
Substructure type Slingshot Cylinder Swing-up, Box-in-Box
Casing Capacity lb 500000 280000
ton 250 140
metric ton 226 127
Floor Height 20'-0" 14'-0" or 20'-0"
m 6.1 4.2 or 6.1
Cellar/Clearance Height 18'-0" 12’-6” or 18’-0”
m 5.4 3.8
Drill Floor Opening in 37½” 27½”
Standard Crown Sheave Groove in 1¼” 1⅛”
Sheaves on Cluster* # 3 2
Rapid Rig Slant Rig

Steel Toe™ Walking System *For reference only, please contact your local sales contact for more information.
Description
Spend less time rigging up and down by simply, and safely, walking to Starting Position Rear Steel Toe
your next well. Our innovative Steel ToeTM walking system moves your
rig while keeping critical equipment stationary or mounted in place
and ready for the next well. Wireless controls ensure safe operations
by allowing your personnel to stay at safe distances during moves. We
the substructure and system controls. The integrated cable management

system, gravity mud return, high pressure piping extensions and choke
reconfigurations integrate your backyard for full functionality.
Value Added Benefits
• Reduced release-to-spud and required crane time

•
• Ability to walk with a full-rated setback Substructure Raised
• Capability to change direction and walk along the X or Y axis
• Allows rig to walk in 45° increments and spin
• Ability to leave rig walkers installed in the Ideal™ Rig substructure base
boxes during pad-to-pad rig moves Front Steel Toe
Key Components
• Steel Toe 1000 walking feet

• BOP beams and hoists to support
• BOP stack while walking
• Flowline manifold or catch and scalping tank
• High pressure piping for mud
Travel Along Rollers
• Festoon cable management system
• System controls options: wireless, remote, tethered back-up power or
manual hydraulic controls
• Structural modifications
• Powered by rig HPU
Technical Specifications
Horizontal system total stroke 24 inches
7 inches
Clearance under substructure* 3 inches
Clearance under foot** 3 inches Ideal™ Rig Application

Number of skidding cylinders 48
4
Substructure Lowered
Number of bearing pads 4
Maximum walking distance 120 feet
*when fully extended and includes substructure deflection

**when fully retracted

Drill Floor Equipment
10. Onshore Top Drives
11. BX-Elevators
12. X-Series Manual Side Door Elevators
13. Manual Single Joint Elevators
14. Elevator Spider and FMS Tool
15. Power Slips
16. Rotary Tables
17. High Pressure Manifolds
18. Onshore Iron Roughnecks
19. Stand Transfer Vehicle (STV) & Pipecat

Onshore Top Drives *For reference only, please contact your local sales contact for more information.
TDS-11SA TDS-11SH TDS-10SH IDS-350PE
The TDS-11SA sets the standard for dependability, performance and Combining the TDS-11SA top drive design, which is the largest-selling The CE-compliant TDS-10SH is a portable top drive designed for land- The IDS-350PE (Portable Enhanced) integrated drilling system is the first
quality. Delivering 500 tons of hoisting capacity, 800 horsepower single design in the history of top drives, with added power density and based drilling operations. It is compact enough to operate safely in a permanent magnet motor top drive from NOV. The machine incorporates
torque, the TDS-11SH is the most powerful top drive of its size. This means a modular design, durability, and ease of operation designed to greatly
established reputation of the top drive is unmatched within the industry. faster and deeper drilling, both vertically and horizontally, to help you The portable design means that rig-up and rig-down operations take only enhance drilling performance. The permanent magnet's high power
reach your payload in even the most demanding formations. With the a few hours. The top drive can also easily integrate into existing rigs with density coupled with proven advantages in AC drilling technology allow
11SA is the largest-selling single design in the history of top drives since minimal cost and rig modification. for drilling rigs to incorporate this improved performance into smaller
their introduction in 1997. profile rigs with minimal or no impact.
forefront of your operations.
Technical Specifications • 800 HP Technical Specifications • 1,100 HP Technical Specifications • 400 HP Technical Specifications • 1,000 HP
Motor Type Baldor Reliance AC Induction Motors • 500 ton API-8C rated Motor Type
Baldor Reliance AC Permanent • 500 tons rotating and Motor Type Baldor Reliance AC Induction Motors • 2500 tons rotating Motor Type
Baldor Reliance AC Permanent • 350 tons rotating and
Magnet Motors Magnet Motors
Horsepower Rating 2 x 400 HP hoisting capacity hoisting capacity Horsepower Rating 1 x 400 HP and hoisting capacity hoisting capacity
Horsepower Rating 2 x 550 HP Horsepower Rating 1 x 1,000 HP
TDS Working Height TDS Working Height
Weight 28,000 lb (12,700 kg)
• TDS Working Height • Weight 18,000 lb (8,164 kg)
• TDS Working Height •
TRANSMISSION continuous drilling Weight 28,000 lb (12,700 kg) continuous drilling TRANSMISSION continuous drilling Weight 33,000 lb (14,968 kg) continuous drilling
Gear Ratio 10.5:1 torque at 110 RPM TRANSMISSION torque at 125 RPM Gear Ratio 13:1:1 torque at 85 RPM TRANSMISSION torque at 145 RPM
Gear Ratio 10.6:1 Gear Ratio 12.6:1
DRILLING PARAMETERS DRILLING PARAMETERS
• DRILLING PARAMETERS • • DRILLING PARAMETERS •
Max Speed 228 RPM Max Speed 182 RPM
torque Max Speed 228 RPM torque torque Max Speed 212 RPM torque
Max Cont. Torque Max Cont. Torque
Max Cont. Torque Max Cont. Torque
Speed @ Max Cont. Torque 110 rpm • Temperature range: • Temperature range: Speed @ Max Cont. Torque 85 rpm • Temperature range: • Temperature range:
Speed @ Max Cont. Torque 125 RPM Speed @ Max Cont. Torque 145 RPM
Max Breakout Torque Maximum Makeup Torque -40°C to 55°C Max Breakout Torque
-40°C to 55°C Max Breakout Torque -40°C to +40°C Max Breakout Torque
-40°C to +55°C
Max Makeup Torque Max Makeup Torque
Static Lock Brake • Max Makeup Torque • Static Lock Brake
Max Makeup Torque
RATING CAPACITIES enhancements: Static Lock Brake enhancements: RATING CAPACITIES

Static Lock Brake
RATING CAPACITIES RATING CAPACITIES
Hoisting and Rotating 500 ton (453,592 kg) Hoisting and Rotating 250 ton (226,796 kg)
• Hoisting and Rotating 500 ton (453,592 kg) Hoisting and Rotating 350 ton (317,514 kg)
Water Course 3 in (76.2 mm) Twister™, Monkey Water Course 3 in (76.2 mm)
Water Course 3 in (76.2 mm) Water Course 3 in (76.2 mm)
Washpipe Packing 7,500 psi (517 bar) • Twister™ Board Collision Washpipe Packing 7,500 psi (517 bar)
Washpipe Packing 7,500 psi (517 bar) Washpipe Packing 7,500 psi (517 bar)
Pipe Handler PH-75
• Monkey Board Pipe Handler PH-75
Warning System Pipe Handler PH-55
Pipe Handler PH-65
Breakout Torque Capacity Breakout Torque Capacity
Drill Pipe Range 3½ in – 6⅝ in (88.9 mm – 168.2 mm)
Collision Warning Breakout Torque Capacity
Drill Pipe Range 2⅞ in – 5 in (73 mm – 127 mm)
Breakout Torque Capacity
Connection OD 4 in – 8½ in (101.6 mm – 215.9 mm)

System Drill Pipe Range 3½ in – 6⅝ in (88.9 mm – 168.2 mm)
Connection OD 4 in – 6⅝ in (101.6 mm – 168.2 mm)
Drill Pipe Range 3½ in – 6⅝ in (88.9 mm – 168.2 mm)
Connection OD 4 in – 8½ in (101.6 mm – 215.9 mm) Connection OD 4 in – 8½ in (101.6 mm – 215.9 mm)
IBOP Pressure Rating 15,000 psi (1,034 bar) IBOP Pressure Rating 15,000 psi (1,034 bar)
IBOP Pressure Rating 15,000 psi (1,034 bar) IBOP Pressure Rating 15,000 psi (1,034 bar)
6⅝ in API Reg. RH Box (remote 6⅝ in API Reg. RH Box
Upper IBOP 6⅝ in API Reg. RH Box (remote Upper IBOP 6⅝ in API Reg. RH Box (remote
operated) Upper IBOP (remote operated) Upper IBOP
operated) operated)
Lower IBOP 6⅝ in API Reg. RH Pin/Box (manual) Lower IBOP 6⅝ in API Reg. RH Pin/Box (manual)
Lower IBOP 6⅝ in API Reg. RH Pin/Box (manual) Lower IBOP 6⅝ in API Reg. RH Pin/Box (manual)
Rotation/Orientation 360°/Unlimited Rotation/Orientation 360°/Unlimited
Rotation/Orientation 360°/Unlimited Rotation/Orientation 360°/Unlimited
OTHER OTHER
OTHER OTHER
Cooling System Local Blower Cooling System Local Blower
Cooling System Local Blower Cooling System Remote Water Cooling
Hydraulic Power Onboard Hydraulic Power Onboard
Hydraulic Power Onboard Hydraulic Power HPU Required
Temperature Range -40°C to +55°C (-40°F to +131°F)* Temperature Range -40°C to +40°C (-40°F to +104°F)
Temperature Range -40°C to +55°C (-40°F to +131°F) Temperature Range -40°C to +55°C (-40°F to +131°F)
Casing Running Tool Ready Optional Casing Running Tool Ready Optional
Casing Running Tool Ready Yes Casing Running Tool Ready Yes
Elevator Links 250, 350 and 500 ton API Elevator Links 250 ton API
Elevator Links 250, 350 and 500 ton API Elevator Links 250 and 350 ton API

Bx-Elevators *For reference only, please contact your local sales contact for more information.
BX3™ BX4-35™ BX4-50™
of the BX 1 and 2 elevators in 1996, our engineers have continuously strived to improve the of the BX 1 and 2 elevators in 1996, our engineers have continuously strived to improve the of the BX 1 and 2 elevators in 1996, our engineers have continuously strived to improve the
operations reliability and safety of its design, resulting in the present BX 3, 4, and 5 design. operations reliability and safety of its design, resulting in the present BX 3, 4, and 5 design. operations reliability and safety of its design, resulting in the present BX 3, 4, and 5 design.
• One door bushing is spring loaded with linkage connecting it to a lockin pin • Rotator for easier handling • One door bushing is spring loaded with linkage connecting it to a locking pin
• Rotator for easier handling • Hydraulically actuated elevator • Rotator for easier handling
• Hydraulically actuated elevator • Hydraulic cylinders • Hydraulically actuated elevator
• Hydraulic cylinders • Quick and easy change of changeable bushings • Hydraulic cylinders
• Quick and easy change of changeable bushings • Trigger mechanism • Quick and easy change of changeable bushings
• Trigger mechanism • Trigger mechanism
Technical specifications Technical specifications Technical specifications

Actuation Hydraulic Actuation Hydraulic Actuation Hydraulic
Control system Automatic remote controlled (stand-alone control panel or driller) Control system Automatic remote controlled (stand-alone control panel or driller) Control system Automatic remote controlled (stand-alone control panel or driller)
Dimension LxWxH 40.24" x 54.40" x 18.06" Dimension LxWxH 26.43" x 40.99" x 17.90" Dimension LxWxH 30.43" x 42.26" x 20.50"
Weight 2,445 lbs Weight 1,600 lbs Weight 2,278 lbs
Tubular types Casing, drill collar (plain) Tubular types Tubular types
Tubular size range (slips)
Tubular size range (slips) Tubular size range (slips)
Changing slips Manually
Changing slips Manually Changing slips Manually
Load rating Up to 350 sTon
Load rating Up to 350 sTon Load rating Up to 500 sTon
Power down force N/A
Power down force N/A Power down force N/A
Req. pressure 2,000 - 2,500 psi (hydraulic)
Req. Pressure 2,000 - 2,500 psi (hydraulic) Req. pressure 2,000 - 2,500 psi (hydraulic)
Flow rate 5 to 7 gpm
Flow rate 5 to 7 gpm Flow rate 5 to 7 gpm
Ambient temp. range -4°F up to 131°F (-20°C up to +55°C)
Ambient temp. range -4°F up to 131°F (-20°C up to +55°C) Ambient temp. range -4°F up to 131°F (-20°C up to +55°C)
Req. crew to operate 1
Req. crew to operate 1 Req. crew to operate 1
Manpower interfering No
Manpower interfering No Manpower interfering No
Interlocking Yes
Interlocking Yes Interlocking Yes
Greasing Hand
Greasing Hand Greasing Hand
BX-closed signal
Yes BX-closed signal BX-closed signal
confirmation Yes Yes
confirmation confirmation
Link size
Link size Link size
Use of rotator Yes
Use of rotator Yes Use of rotator Yes
API 8C
API 8C API 8C
CE Yes
CE Yes CE Yes
ATEX Yes
ATEX Yes ATEX Yes

X-Series Manual Side Door Elevators *For reference only, please contact your local sales contact for more information.
SMX SLX SX SLX-DD

The X-series elevators handle all sizes of collar-type tubing, drill pipe and The X-series elevators handle all sizes of collar-type tubing, drill pipe and The X-series elevators handle all sizes of collar-type tubing, drill pipe and The X-series elevators handle all sizes of collar-type tubing, drill pipe and
casing. The SMX has a patented latch & lock arrangement mounted on the casing. The SMX has a patented latch & lock arrangement mounted on the casing. The SMX has a patented latch & lock arrangement mounted on the casing. The SMX has a patented latch & lock arrangement mounted on the
elevator door. The handle protects the latch from accidental opening. Both elevator door. The handle protects the latch from accidental opening. Both elevator door. The handle protects the latch from accidental opening. Both elevator door. The handle protects the latch from accidental opening. Both
latched operate from a single handle. latched operate from a single handle. latched operate from a single handle. latched operate from a single handle.
• 8C qualified • 8C qualified • 8C qualified • 8C qualified

• For handling collar type casing, collary type tubing, and drill collars • For handling collar type casing, collary type tubing, and drill collars • For handling collar type casing, collary type tubing, and drill collars • For handling collar type casing, collary type tubing, and drill collars
• Tool is fit for manual operation • Tool is fit for manual operation • Tool is fit for manual operation • Tool is fit for manual operation
• Lock and unlock one-hand operation • Lock and unlock one-hand operation • Lock and unlock one-hand operation • Lock and unlock one-hand operation
• Latching/locking by closing door • Latching/locking by closing door • Latching/locking by closing door • Latching/locking by closing door
• Latched and locked verification; separate action and incorporated in • Latched and locked verification; separate action and incorporated in • Latched and locked verification; separate action and incorporated in • Latched and locked verification; separate action and incorporated in
design design design design
• Round ears for easy rotating in links • Round ears for easy rotating in links • Round ears for easy rotating in links • Round ears for easy rotating in links
• Easy to rig up • Easy to rig up • Easy to rig up • Easy to rig up
• Hinge up bushings • Hinge up bushings • Hinge up bushings • Hinge up bushings
• Lower link ears are 8C rated for 5 ton slings • Lower link ears are 8C rated for 5 ton slings • Lower link ears are 8C rated for 5 ton slings • Lower link ears are 8C rated for 5 ton slings
• Handling grup on elevator back for easy handling • Handling grup on elevator back for easy handling • Handling grup on elevator back for easy handling • Handling grup on elevator back for easy handling
• Handling handle for link mount is avilable (part number • Handling handle for link mount is avilable (part number • Handling handle for link mount is avilable (part number • Handling handle for link mount is avilable (part number
50006435); (optional; can also be used for other applications) 50006435); (optional; can also be used for other applications) 50006435); (optional; can also be used for other applications) 50006435); (optional; can also be used for other applications)
• SMX series (8 frames) replaces SLX, SSD and SX type • SMX series (8 frames) replaces SLX, SSD and SX type • SMX series (8 frames) replaces SLX, SSD and SX type • SMX series (8 frames) replaces SLX, SSD and SX type
elevators (15 frames) elevators (15 frames) elevators (15 frames) elevators (15 frames)
Technical Specfications Technical Specifications Technical Specifications Technical Specifications

Max. Weight Link Size Min. Link Size Max. Max. Weight Link Size Min. In. Link Size Max. In. Load Max. Weight lbs. Link Size Max. in.
Load Rating Size inches (mm) Load Rating Size inches (mm) Size inches (mm) Link Size min in. (mm)
lbs. (kg) In. (mm) In. (mm) lbs. (kg) (mm) (mm) Rating (kg) (mm) Link Size min in. Link Size Max. in.
Load Rating Size inches (mm) Max. Weight lbs. (kg)
(mm) (mm)
150 / 136 3.1/2 - 5.3/4 (88.9-146.1) 278 (126) 2.1/4 (57) 2.3/4(70) 65/59 1.66 - 3.1/8 (42.2-79.4) 50 (23) 1.3/4 (44) 2.1/4 (57)
350/317 9.5/8- 16.3/4 (244.5-425.5 1200 (544) 2.1/4(57) 3.1/2 (89)
250 / 227 6 - 13 (152.4-330.2) 563 (255) 2.1/4(57) 3.1/2(89) 100/90 2.3/8- 6 (60.3-152.4) 145 (66) 1.3/4 (44) 2.3/4(70)
500/454 9.5/8-13.5/8 (244.5-346.1 1235(560) 2.3/4(70) 3.1/2(89) 220/225 18-30 (457.2-792) 1820 (826) 1.3/4(44) 3.1/2 (89)
350 / 318 9- 13.3/8(228.6- 339.7) 563 (255) 2.1/4(57) 3.1/2(89) 150 / 136 5.1/2 - 18.5/8 (139.7-473.1) 705 (320) 1.3/4 (44) 3.1/2 (89)
250 / 227 13.1/2 - 17.7/8(342.9-454.1) 679 (308) 2.1/4(57) 3.1/2(89) 250 / 227 21.1/2-24.1/2 (546.1-622.3) 1208 (548) 1.3/4 (44) 3.1/2 (89)
250 / 227 18 - 24.1/2 (457.2-622.3) 902 (409) 2.1/4(57) 3.1/2(89)
©National Oilwell Varco - All rights reserved - RigDoc 100464431 Rev. 1

Manual Single Joint Elevators *For reference only, please contact your local sales contact for more information.
SJH SJL SPL DSJX Heavy Duty SJX
The SJH horizontal pick up elevator is designed to pick
the tubulars prior to closing the elevator. The elevator is
and casing. It will handle single joints of pipe straight from
The SJX single joint elevator is designed for running single

Load joints of tubing and casing from V-door to well center.
Appr. weight It is double hinged for use with the CRT Casing Running
Rating SJL and SPL single-joint, center-latch elevators are
Size inches (mm) Pipe type (lbs/kg) Tool, or any other stabberless operation. Ergonomically
(sTon/ designed to replace unsafe rope slings for hoisting collar-
(incl. jaws)
Tonne) SJL and SPL single-joint, center-latch elevators are
type pipe into position. The SJL 90° elevator enables the
designed to replace unsafe rope slings for hoisting collar- sling shackles from pinching hands. Suitable for loads up
5 / 4.5 2.3/8 – 4.1/2 (60.3-114.3) Tbg & Dp 100 / 45 crew to handle pipe properly, help avoid damage to pipe
type pipe into position. The SJL 90° elevator enables the to 5 sTon / 4.5 Tonne.
4.1/2 – 7.5/8 (114.3- threads and reduce the chances of accident or injury.
5 / 4.5
193.7)
Tbg & Dp 111 / 51 crew to handle pipe properly, help avoid damage to pipe
The SPL elevator is the same as the SJL elevator except
threads and reduce the chances of accident or injury. • Designed for pick-up and running single joints of tubing
5 / 4.5 7 – 10.3/4 (177.8-273.1) Csg 132 / 60 that the SPL elevator is designed for use on tapered pipe,
The SPL elevator is the same as the SJL elevator except and casing from v-door to well center
conforming to API specifications for extreme line casing.
that the SPL elevator is designed for use on tapered pipe,
conforming to API specifications for extreme line casing. • 2-way access due to double hinge pin arrangement
Load Rating • Double hinged for use with CRT Casing Running Tool
Size Range inches Max. Weight Range
(sTon/
(mm) lbs. (kg.) Load Rating Max. Weight
Tonne) Size Range inches • No loose parts, as hinge pins are contained within the
Type (sTon/ Range lbs. body halves
(mm) The D-SJX is the heavy duty version of the SJX, capable of
5 / 4.5 2.7/8- 13.1/2 (60.3 - 114.3) 45-342.9 (20-55) Tonne) (kg.)
SPL 5 5 / 4.5 2.7/8- 7.5/8 (60.3 - 114.3) 77-108 (35-49)
handling doubles and triples up to 12 STon / 10.9 Tonne. • Clear visual gripping points for safe operation
7.5/ 6.8 12.7/8 – 30 (355.6 - 762) 121-404 (55-183.3)
SPL 12 5 / 4.5 2.3/8-5 (60.3-127) 86 (39)
• Ergonomically deisnged handles, with cast on stop pins,
• High capacity single joint - 12 sTons (106 kN) API rating
SPL 18 5 / 4.5 2.3/8-6.5/8 (60.3-168.3) 79-94 (36-49)
• DSJX is designed for running doubles or triples during and prevent shackles from getting stuck underneath the
casing coupling while hoisting.
• DSJX used special inserts to handle a range of pipe •
types casing with the SJX upside down.
• Elevator can handle drill pipe and square shoulder pipe • Verification "latched-and-locked" safety pin
• Lightweight for easy manual handling; on the average,
45% lighter than other single joints
Load Rating Size Range Inches Max. Weight Range
(sTon/Tonne) (mm) lbs. (kg.) • Designed and qualified accoring to API 8C rules
• Rubular sizes from 2 3/8'' to 14''; information on larger
12/11 3.1/2-7.1/2 (88.9-190.5) 79-89 (36-40)
sizes is avialable upon request
• Rating of 5 tons
Load Rating Max.

Size Range Max. Weight
(sTon/ Weight
Inches (mm) Range lbs. (kg.)
Tonne) Range (kg.)
4.1/2-10.3/4
5/4.5 37-67 (17-30) 17-30
(100.8-323.9)

Elevator/Spider and FMS Flush Mounted Slips *For reference only, please contact your local sales contact for more information.
BJ-250 BJ-350 FMS275 FMS375 Varco-500 14"
Description Description Description Description Description Description

The BJ-250 elevator/spider tool is designed The BJ-350 elevator/spider tool is designed for The FMS275 is a hydraulic operated near-flush The FMS375 is mounted flush with the rig floor,
mounted slip for running completion strings allowing the casing connection height to be and suspending tubular goods, from light and suspending tubular goods, from light
from light tubing to heavy wall pipe and drill tubing to heavy wall pipe and drill collars. The tubing to heavy wall pipe and drill collars. The tubing to heavy wall pipe and drill collars. The
collars. The 250 sTon model is designed for main body of these units can be dressed as a rigs to handle completion strings and casing main body of these units can be dressed as a main body of these units can be dressed as a
medium to long strings of smaller casing. The casing elevator or a spider. The upper unit is more room to work by removing the spider casing elevator or as a spider. The upper unit casing elevator or as a spider. The upper unit
main body of these units can be dressed as a dressed as an elevator, using a bottom guide control lines. The unit is a companion tool to body from the top of the rig floor. The unit is is dressed as an elevator, using a bottom guide is dressed as an elevator, using a bottom guide
casing elevator or as a spider. The upper unit and a bell guide. The lower unit is dressed as a the "BJ" style 250 sTon elevator/spider. The slip designed to fit standard 37" rotary tables and and bell guide. The lower unit is dressed as a and bell guide. The lower unit is dressed as a
is dressed as an elevator, using a bottom guide spider, using a top guide to aid in centering the power down force generated allows the FMS to can be used in combination with the 500 sTon spider, using a top guide to aid in centering spider, using a top guide to aid in centering
and a bell guide. The lower unit is dressed as casing. The unitized design of the slip assembly take the torque reaction of the tong when the 14" Varco type elevator spider. The slip power casing. casing.
a spider, using a top guide to aid in centering allows the tool to grip casing with uniform down force generated allows the FMS to take
the casing. The unitized design of the slip circumferential pressure, ensuring a safe hold and it eliminates the need for a manual tong. the torque reaction of the tong when the string
assembly allows the tool to grip casing with while minimizing the possibility to damage the The powered down slips allow the first joint of
uniform circumferential pressure, ensuring a pipe. The unit is either manual or air operated. casing to be run with the FMS. The replaceable it eliminates the need for a manual tong. The Technical Specifications Technical Specifications
safe hold while minimizing the possibility to A double hinged door permits the unit to be slip and insert carriers are set/raised by the powered down slips allow the first joint of
Max weight slips set w/inserts (lbs/kg) 600 / 272 Max weight slips set w/inserts (lbs/kg) 600 / 272
damage the pipe. The unit is either manual or rapidly installed on the casing or removed. operator using remote controls. casing to be run with the FMS. The replaceable
air operated. A double hinged door permits slip and insert carriers are set/raised by the Load rating (sTon /Tonne) 500 / 454 Load rating (sTon /Tonne) 500 / 454
the unit to be rapidly installed on the casing or operator using remote controls.
Casing size range (inches) Casing size range (inches)
removed.
MANUAL & PNEUMATIC ELEVATORS MANUAL & PNEUMATIC ELEVATORS
Technical Specifications Technical Specifications Technical Specifications Technical Specifications
Weight without slip assembly (lbs/kg) 5,000 / 2,268 Weight without slip assembly (lbs/kg) 7,950 / 3,606
Weight without slip assembly (lbs/kg) 2,043 / 927 Weight without slip assembly (lbs/kg) 3,500 / 1,587 Weight without slip assembly (lbs/kg) 2,755 / 1,250 Weight without slip assembly (lbs/kg) 5,392 / 2,446
Normal operating pressure (psi/kPa) 85 / 585 Normal operating pressure (psi/kPa) 85 / 585
Max weight slips set w/inserts (lbs/kg) 550 / 250 Max weight slips set w/inserts (lbs/kg) 650 / 295 Weight FMS with slips and guides (lbs/kg) 3,300 / 1,497 Weight FMS with slips and guides (lbs/kg) 6,992 / 3,171
Max. operating pressure (psi/kPa) 125 / 861 Max. operating pressure (psi/kPa) 125 / 861
Casing size ranges (inches) Casing size ranges (inches) Pipe size ranges (inches) Pipe size ranges (inches) up to 14
HYDRAULIC ELEVATORS HYDRAULIC ELEVATORS
Load rating (sTon/Tonne) 250 / 226 Load rating (sTon/Tonne) 350 / 317 Load rating (sTon/Tonne) 250 / 226 Load rating (sTon/Tonne) 500 / 454
Weight without slip assembly (lbs/kg) 5,392 / 2,446 Weight without slip assembly (lbs/kg) 9,500 / 4,275
27.5 (or reduced
Normal operating pressure (psi/kPa) 85 / 585 Normal operating pressure (psi/kPa) 85 / 585 Rotary size (inches) Rotary size (inches) 37.5
from 37.5) Min. inlet pressure (psi/kPa) 1,500 / 10,342 Min. inlet pressure (psi/kPa) 1,500 / 10,342
Max. operating pressure (psi/kPa) 125 / 861 Max. operating pressure (psi/kPa) 125 / 861 Min. inlet pressure (psi/kPa) 1,500 / 10,342 Min. inlet pressure (psi/kPa) 1,500 / 10,342
Normal operating pressure (psi/kPa) 2,000 / 13,790 Normal operating pressure (psi/kPa) 2,000 / 13,790
Min. allowed ambient temperature -4°F / -20°C Min. allowed ambient temperature -4°F / -20°C Normal operating pressure (psi/kPa) 2,000 / 13,790 Normal operating pressure (psi/kPa) 2,000 / 13,790
Max. inlet pressure (psi/kpa) 2,500 / 17,237 Max. inlet pressure (psi/kpa) 2,500 / 17,237
Max. allowed ambient temperature 131°F / 55°C Max. allowed ambient temperature 131°F / 55°C Max. operating pressure (psi/kPa) 2,500 / 17,237 Max. operating pressure (psi/kPa) 2,500 / 17,237
500 - 750 / 500 - 750 /
Recommended inlet pressure slips up (psi/kPa) Recommended inlet pressure slips up (psi/kPa)
Recommended inlet pressure slips up (psi/ 500 - 750 / 3,447 Recommended inlet pressure slips up 500 - 750 / 3,447 3,447 - 5,171 3,447 - 5,171
kPa) - 5,171 (psi/kPa) - 5,171
Max. pressure slips up (psi/kPa) 1,000 / 6,895 Max. pressure slips up (psi/kPa) 1,000 / 6,895
Max pressure slips up (psi/kPa) 1,000 / 6,895 Max pressure slips up (psi/kPa) 1,000 / 6,895
Max. pressure slips down (psi/kPa) 2,500 / 13,790 Max. pressure slips down (psi/kPa) 2,500 / 13,790
200 / 1,378 200 / 1,378
line and return line (psi/kPa) line and return line (psi/kPa)
Max allowed pressure in return line (psi/kPa) 200 / 1,378 Max allowed pressure in return line (psi/kPa) 200 / 1,378 200 / 1,378 200 / 1,378
and return line (psi/kPa) and return line (psi/kPa)
Applied max. back-up torque @ 2,500 psi / Applied max. back-up torque @ 2,500 psi /
14,370 / 19,483 40,000 / 54,232 Max. allowed pressure in return line (psi/kPa) 200 / 1,378 Max. allowed pressure in return line (psi/kPa) 200 / 1,378

Power Slips *For reference only, please contact your local sales contact for more information.
PS-15 PS-16 PSF PS-21

springs
springs
*Model shown above is the PS-16 with air cylinders on the

side. These are not found on the actual PS-15 model

Actuation Spring Actuation Air Actuation Electro-hydraulic Actuation Hydraulic
Automatic remote controlled (hand or foot Automatic remote controlled (hand or foot
Control system Manual Control system Control system Control system Automatic remote controlled (control panel)
controlled) controlled)
Dimension LxWxH 33" x 41.5" Dimension LxWxH 32" x 48.4" Dimension LxWxH 36.6" x 27.5" Dimension LxWxH Ø 39.88" x 35.5"
Weight 1,040 lbs Weight 1,600 lbs Weight 365 lbs Weight 5,600 lbs
Rotary size Rotary size Rotary size Rotary size

Fits in Oilwell/Wirth/Gardner Denver, Emsco, Ideco,
Rotary configuration Fits in Master Bushing Rotary configuration Fits in Master Bushing Rotary configuration Fits in Master Bushing Rotary configuration
Varco/National
Tubular type Drill pipe Tubular types Drill pipe Tubular types Drill pipe Tubular type Drill pipe, casing, drill collar, tubing
Tubular size range (slips) Tubular size range (slips) Tubular size range (slips) Tubular size range (slips)
Changing slips Manually Changing slips Manually Changing slips Manually Changing slips Using a special tool to insure
Load rating Up to 750 sTon Load rating Up to 750 sTon Load rating -- Load rating 350 sTon
Backup torque -- Backup torque -- Backup torque -- Backup torque
Centering device -- Centering device -- Centering device -- Centering device Comply
Slip set back -- Slip set back -- Slip set back -- Slip set back Comply
Throat opening w/o slips 15" Throat opening w/o slips 16" Throat opening w/o slips Depending on size bushing bowl Throat opening w/o slips 21"
Set: 11" Set: 17.5" Set: 11.3"
Height above rig floor Height above rig floor Height above rig floor Height above rig floor 7"
Released: 19" Released: 26" Released: 27.5"
Required pressure -- Required pressure 90 psi (air) Required pressure 600 psi (hydraulic) Required pressure 2,300 - 2,500 psi (hydraulic)
Flow rate -- Flow rate -- Flow rate 3 gpm Flow rate 10 gpm
Ambient temperature range -4°F up to 104°F (-20°C up to 45°C) Ambient temperature range -4°F up to 104°F (-20°C up to 45°C) Ambient temperature range -4°F up to 104°F (-20°C up to 45°C) Ambient temperature range -4°F up to 104°F (-20°C up to 45°C)
Required crew to operate 2-3 Required crew to operate 1 Required crew to operate 1 Required crew to operate 1
Manpower interfering Yes Manpower interfering No Manpower interfering No Manpower interfering No
Interlocking No Interlocking Yes Interlocking No Interlocking Yes
Greasing Hand Greasing Hand Greasing Hand Greasing Automated
Slip-set signal confirmation No Slip-set signal confirmation Yes Slip-set signal confirmation No Slip-set signal confirmation Yes
Slip-up signal confirmation No Slip-up signal confirmation No Slip-up signal confirmation No Slip-up signal confirmation No
Top cover No Top cover No Top cover No Top cover Yes
API 7K API 7K API N/A API 7K
CE Yes CE Yes CE No CE Yes
ATEX N/A ATEX Yes ATEX No ATEX Yes

Rotary Support Table *For reference only, please contact your local sales contact for more information.
RST-375
Table size Required crew to operate 1
Actuation Hydraulic Manpower interfering No
Control system Automatic remote controlled (control panel) Interlocking Yes
Dimension L x W x H 89" x 61.75" x 28.2" Control station Yes
Weight (depends on size topcover) Appr. 14,102 lbs PS compatibility PS21
Load rating (static) 750 sTon Greasing Automated and manual
Torque max Flushing kit Yes / flushiung PS
Max. back-up torque API 7K
Speed max (intermittent) 15 RPM CE Yes
Max. operational speed (continously) 5 RPM ATEX Yes
Max. working pressure 3,000 psi (hydraulic) IECEX Yes
Max. flow rate 75 gpm DSB Yes
Ambient temperature range 4°F up to 131°F (-20°C up to 55°C)
RST-495
Table size Required crew to operate 1
Actuation Hydraulic Manpower interfering No
Control system Automatic remote controlled (control panel) Interlocking Yes
Dimension L x W x H 105" x 82" x 30.42" Control station Yes
Weight (depends on size topcover) Appr. 22,175 lbs PS compatibility PS21/30/495
Load rating (static) 1,000 sTon Greasing Automated and manual
Torque max Flushing kit Yes / flushing PS
Max. back-up torque API 7K
Speed max (intermittent) 15 RPM CE Yes
Max. operational speed (continously) 5 RPM ATEX Yes
Max. working pressure 3,000 psi (hydraulic) IECEX Yes
Max. flow rate 115 gpm DSB Yes
Ambient temperature range -4°F up to 131°F (-20°C up to 55°C)

High Pressure Manifolds *For reference only, please contact your local sales contact for more information.
Choke & Kill 3” 5K Choke & Kill 4” 10K / 4” 5K Choke & Kill 4” 10K Choke & Kill 4” 15K / 3” 15K
Features and Benefits Features and Benefits Features and Benefits Features and Benefits
• Saudi Aramco Drilling workover well-control manual (Vol. 1 5th edition • Saudi Aramco Drilling workover well-control manual (Vol. 1 5th edition • 1000HP Guidance specification for choke manifolds - designed and • Designed and supplied in accordance with KOC specification of
2014) - designed and supplied in accordance with Saudi Aramco 2014) - designed and supplied in accordance with Saudi Aramco supplied in accordance with NDC operational requirements contractors, rigs, and associated equipment
specification specification • Complete manifold packages available for delivery from 3 weeks • Complete manifold packages available for delivery from 3 weeks
• Complete manifold packages available for delivery from 3 weeks • Complete manifold packages available for delivery from 3 weeks • Forged steel body and bonnet, single-seat assembly design, • Forged steel body and bonnet, single-seat assembly design,
• Forged steel body and bonnet, single-seat assembly design, • Forged steel body and bonnet, single-seat assembly design, bidirectional sealing, low operating torque, manual operated (non- bidirectional sealing, low operating torque, manual operated (non-
bidirectional sealing, low operating torque, manual operated (non- bidirectional sealing, low operating torque, manual operated (non- rising stem) rising stem)
rising stem) rising stem) • Reduced weight and footprint to allow for standard freight options • Reduced weight and footprint to allow for standard freight options
• Reduced weight and footprint to allow for standard freight options • Reduced weight and footprint to allow for standard freight options • Flexible to customer valve preference • Flexible to customer valve preference
• Flexible to customer valve preference • Flexible to customer valve preference • Manual and/or hydraulic actuator options • Manual and/or hydraulic actuator options
• Manual and/or hydraulic actuator options • Manual and/or hydraulic actuator options • • Raised access platform and bolted-design modular skid frame designed
• • transport, and low maintenance
transport, and low maintenance transport, and low maintenance • Standard local control panel is universal function LCP tested and • Standard local control panel is universal function LCP tested and
• Standard local control panel is universal function LCP tested and • Standard local control panel is universal function LCP tested and delivered with manifold delivered with manifold
delivered with manifold delivered with manifold • Double Isolation valves with suitable pressure rating • Double Isolation valves with suitable pressure rating
• Double Isolation valves with suitable pressure rating • Double Isolation valves with suitable pressure rating • Corrosion resistence using inconel nickel-chromium alloy 625 • Corrosion resistence using inconel nickel-chromium alloy 625
• Corrosion resistence using inconel nickel-chromium alloy 625 • Corrosion resistence using inconel nickel-chromium alloy 625 • Lightweight pipex grating system with anti-slip coating • Lightweight pipex grating system with anti-slip coating
• Lightweight pipex grating system with anti-slip coating • Lightweight pipex grating system with anti-slip coating

Working pressure 5,000psi Working pressure 10,000psi /5,000psi Working pressure 10,000psi Working pressure 15,000psi
Upstream/downstream API 3-1/8’’ Upstream/downstream API 4-1 ⁄16’’ / 4-1/16’’ Upstream/downstream API 4-1 ⁄16’’ Upstream/downstream API 4-1 ⁄16’’ / 3-1/16’’
Service EE/NL/SourNACE MR0175 Service EE/NL/SourNACE MR0175 Service EE/NL/SourNACE MR0175 Service EE/NL/SourNACE MR0175
API standards API 6A / 16C & STD 53 API standards API 6A / 16C & STD 53 API standards API 6A / 16C & STD 53 API standards API 6A / 16C & STD 53
Ring groove inlay CRA 625 Ring groove inlay CRA 625 Ring groove inlay CRA 625 Ring groove inlay CRA 625
Temp class ‘P-X’ (-29°C – 177 °C) Temp class ‘P-X’ (-29°C – 177 °C) Temp class ‘P-X’ (-29°C – 177 °C) Temp class ‘P-X’ (-29°C – 177 °C)
Choke model NOV MPX-40D Choke model NOV MPX-40D Choke model NOV MPX-40D Choke model NOV MPX-40D
Choke actuator Hydraulic Choke actuator Hydraulic Choke actuator Hydraulic Choke actuator Hydraulic
Choke size 3’’ Choke size 4’’ Choke size 4’’ Choke size 3’’
Choke transmitter sensor 4-20 mA Choke transmitter sensor 4-20mA Choke transmitter sensor 4-20mA Choke transmitter sensor 4-20 mA
Local pressure transmitter 4-20 mA Local pressure transmitter 4-20mA Local pressure transmitter 4-20mA Local pressure transmitters 4-20 mA
Isolation valves NOV API 6A Gate Valves Isolation valves NOV API 6A Gate Valves Isolation valves NOV API 6A Gate Valves Isolation valves NOV API 6A Gate Valves
Product Specification Level PSL3 (Gas-Tested Valves & Chokes) Product Specification Level PSL3 (Gas-Tested Valves & Chokes) Product Specification Level PSL3 Product Specification Level PSL3G (API 6A Components)
Performance requirement PR-2 Performance requirement PR-2 Performance requirement PR-2 Performance requirement PR-2
Dimensions (L x W x H) 3.9m x 4.7m x 2m Dimensions (L x W x H) 6.3m x 5.5m x 2.2m Dimensions (L x W x H) 6.3m x 5.5m x 1.9m Dimensions (L x W x H) 5.1m x 3.3m x 2.9m
3.9m x 2.9m x 2m + 6.3m x 2.7m x 2.2.m + 6.3m x 2.7m x 1.9m
Transport dimensions (L x W x H) Transport dimensions (L x W x H) Transport dimensions (L x W x H) Transport dimensions (L x W x H) 5.1m x 2.8m x 2.9.m
3.9m x 1.8m x1m 6.3m x 2.8m x 1.8m + 6.3m x 2.8m x 1.5m
Weight 22,000kg Weight 22,000kg Weight 23,000kg Weight 22,000kg
Verified skid structural analysis Yes Verified skid structural analysis Yes Verified skid structural analysis Yes Verified skid structural analysis Yes
Manufacturing certification ISO 9001-2008 Manufacturing certification ISO 9001-2008 Manufacturing certification ISO 9001-2008 Manufacturing certification ISO 9001-2008

Onshore Iron Roughnecks *For reference only, please contact your local sales contact for more information.
ST-80C ST-80CL ST-100 ST-120

Controls Local manual Local manual, Hard-wired remote console, Integrated NOV driller’s Local manual, Hard-wired remote console, Integrated NOV driller’s Local manual, Hard-wired remote console, Integrated NOV driller’s
Controls Controls Controls
Mount Pedestal with floor mounted socket control control control
Mount Pedestal with floor mounted socket Mount Pedestal with floor mounted socket Mount Pedestal with floor mounted socket
Pedestal Rotation ±90° (manual)
Pedestal Rotation ±90° (manual and power slew) Pedestal Rotation ±90° (power slew) Pedestal Rotation ±90°
Hydraulic Requirements (min) 28 GPM @ 2,100 psi (106 LPM @ 145 bar)
Hydraulic Requirements (min) 28 GPM @ 2,100 psi (106 LPM @ 145 bar) Hydraulic Requirements (min) 45 GPM @ 2,500 psi (170 LPM @ 172 bar) Hydraulic Requirements (min) 45 GPM @ 2,500 psi (170 LPM @ 172 bar)
Hydraulic Requirements (max) 40 GPM @ 3,000 psi (151 LPM @ 207 bar)
Hydraulic Requirements (max) 40 GPM @ 3,000 psi (151 LPM @ 207 bar) Hydraulic Requirements (max) 55 GPM @ 3,000 psi (208 LPM @ 207 bar) Hydraulic Requirements (max) 65 GPM @ 3,000 psi (246 LPM @ 207 bar)
Assembly Weight 7,800/8,320 lbs (3,538/3,773 kg)
Assembly Weight Approximately 9,400 lbs (4,263 kg) Assembly Weight 11,500 lbs (5,216 kg) Assembly Weight 19,800 lbs (8,981 kg) installed weight
Tool Joint Connection (OD) Range *41/8” to 81/2”
Tool Joint Connection (OD) Range *4 1/8” to 8 1/2” Tool Joint Connection (OD) Range *31/2” to 9¾” Tool Joint Connection (OD) Range 3 7/8” to 10”
Spin Speed 75 RPM with 5” DP, 35 GPM
Spin Speed 75 RPM with 5” DP, 35 GPM Spin Speed 80 RPM with 5” DP, 45 GPM Spin Speed 80 RPM (nominal on 5” DP)
Spin Torque
Spin Torque Spin Torque Spin Torque
Maximum Makeup Torque
Maximum Makeup Torque Maximum Makeup Torque Maximum Makeup Torque
Maximum Breakout Torque
Maximum Breakout Torque Maximum Breakout Torque Maximum Breakout Torque
Connection Height 23” to 59” (584 mm to 1,498 mm)
Connection Height 23” to 65” (584 mm to 1,651 mm) Connection Height 30” to 66” (762 mm to 1,676 mm) Connection Height 31.5” to 73.4” (800 mm to 1,864 mm)
Horizontal Travel** 60” (1,524 mm) ***Optional 15” to 25” added reach
Horizontal Travel** 100” (2,540 mm) Horizontal Travel** 60” (1,524 mm) or 96” (2,438 mm) Horizontal Travel* 144” (3,658 mm)
Vertical Adjustment 36” (914 mm) or 72” (1,828 mm)
Vertical Adjustment 42” (1,067 mm) Vertical Adjustment 36” (914 mm) Vertical Adjustment 42” (1,067 mm)
Casing Ready No
Casing Ready No Casing Ready No Casing Ready No
Torque Wrench Angle 30°
Torque Wrench Angle 30° Torque Wrench Angle 60° Torque Wrench Angle 60°
* ST-80 and ST-100 can make/break certain tool joints on 2 7/8” drill pipe * ST-80 and ST-100 can make/break certain tool joints on 2 7/8” drill pipe * ST-80 and ST-100 can make/break certain tool joints on 2 7/8” drill pipe * NOV classifies total horizontal travel as the distance between points A and B. Point A is defined as the centerline of
** NOV classifies total horizontal travel as the distance between points A and B. Point A is defined as the centerline ** NOV classifies total horizontal travel as the distance between points A and B. Point A is defined as the centerline ** NOV classifies total horizontal travel as the distance between points A and B. Point A is defined as the centerline the jaw dies when the iron roughneck is fully retracted. Point B is defined as the centerline of the jaw dies when the
of the jaw dies when the iron roughneck is fully retracted. Point B is defined as the centerline of the jaw dies when of the jaw dies when the iron roughneck is fully retracted. Point B is defined as the centerline of the jaw dies when of the jaw dies when the iron roughneck is fully retracted. Point B is defined as the centerline of the jaw dies when iron roughneck is fully extended.
the iron roughneck is fully extended. the iron roughneck is fully extended. the iron roughneck is fully extended.
*** Horizontal travel may be increased upon request with use of an extender plate.

Stand Transfer Vehicle (STV) & PipeCat™ *For reference only, please contact your local sales contact for more information.
STV Pipecat
The Stand Transfer Vehicle (STV) is a fingerboard-mounted system The function of the PipeCat laydown system is to move When the trough is raised to the drill floor, the skate
tubulars between the catwalk and drill floor. The primary is used to push tubulars to well center, and to receive
of tubulars, but guides the top of the stand between the elevators and the moving component is the trough. The trough is used tubulars as they are unloaded from the elevators. The
fingerboard. PipeCat laydown system is operated using an Amphion™
The STV system includes the fingerboard and a carriage mounted arm mounted on the underside of the V-Door. When the control system and is powered by an external electrical
which rides up and down rails which are integral to the diving board. The trough is lowered into the catwalk, a system of pipe power source and an external hydraulic power unit. The
pipe handling head is designed to capture rather than grip the stand. This racks, indexer arms, and kicker arms are used to load illustrations below show examples of laydown system
prevents adverse loading due to the lean of the stand present when the pin tubulars to and from the trough. Pipe racks may be layouts. Refer to the assembly drawings, schematics,
is in the setback and the box is at well center. installed on one or both sides of the catwalk. A skate is and documentation supplied with this manual for exact
used to position tubulars along the length of the trough. configuration details.
The pipe handling head consists primarily of two arms and a body. The
two arms are connected to the body via parallel linkages and one hydraulic PC-5-47 PC-5-65
on Iron Roughnecks.
Technical Specifications Technical Specifications Technical Specifications

Service Upper guide arm Model PC-5-47 Model PC-5-65
Area classification Zone 1 Safe Working Load 10,000 lbs (4,536 kg) Safe Working Load 10,000 lbs (4,536 kg)
Hydraulic requirements 15 GPM 2500 psi Maximum Tubular Length 47’ (14,326 mm) Maximum Tubular Length Maximum Length: 65’ (19,812 mm)
Electrical 120 VAC
Tubular Diameter Range 2 3/8” to 24” (60 mm to 610 mm) Tubular Diameter Range 2 3/8” to 24” (60 mm to 610 mm)
Compressed air 90 psi
Drill Floor Height 25' – 0" (7,620 mm) Drill Floor Height 25' – 0" (7,620 mm)
Weight (guide arm only) 2500 lbs
Main Power 480/240/120 VAC ~ 50/60 Hz Main Power 480/240/120 VAC ~ 50/60 Hz
Extension force 1800 lbs retracted, 2700 lbs extended
Control Power 208/120 VAC ~ 50/60 Hz Control Power 208/120 VAC ~ 50/60 Hz
Retraction force 1800 lbs extended, 1200 lbs retracted
Maximum Ambient Temperature 122°F (50°C) Maximum Ambient Temperature 131 °F (55°C)
Max radial force at extension 1500 lbs
Control System Integrated Amphion Control System Control System Integrated Amphion™ Control System
Max slew moment
Hydraulic Power Unit Integrated Hydraulic Power Unit Integrated
Tubular capacities 3 1/2" drill pipe to 10" collars
Extension speed TUBULAR SPECIFICATIONS TUBULAR SPECIFICATIONS
Retraction speed Drill Pipe and Tubing 2 3/8” to 6 5/8” (60 to 168mm) Range II and Range III Drill Pipe and Tubing 2 3/8” to 6 5/8” (60 to 168 mm) Range II Doubles & Range III Singles
Slew time 90 ° in 3.2 sec Drill Collar 3 1/2” to 11” (89 to 279mm) Range II Drill Collar 3 ½ to 11” (89 to 279 mm) up to maximum weight of 10,000 lbs/4,536 kg
Carriage travel Casing Up to 24” (610 mm) Range III, Max 10,000 lbs (4,536 kg) Casing Up to 24” (610 mm) Range II Doubles up to 65’ & Range III Singles

Drawworks
22. ADS Drawworks
23. DSGD-375 & SSGD-250

ADS Drawworks *For reference only, please contact your local sales contact for more information.
Our Automated Drawworks systems (ADS) provides drillers with enhanced which provide significantly more performance and have made possible a
machine that requires approximately half the space and weight with less
safety of the drilling process. These drawworks are equipped with AC motors maintenance than traditional drawworks.
ADS-10SD ADS-30D
Technical Specifications Technical Specifications

DESIGN DATA DESIGN DATA
Max hook load 12 lines 483.5 sT (438.6 mT) Max hook load 14 lines 793 sT (719 mT)
Max hook load 8 lines 340 sT (308.4 mT) Max hook load 10 lines 597.5 sT (542 mT)
Weight 64,325 lbs (39,177 kg) Weight 100,200 lbs (47,718 kg)
248" x 119" x 111.5" 144.3" x 290" x 136"
Dimensions (LxWxH) Dimensions (LxWxH)
(630 cm x 302.3 cm x 283.2 cm) (366.5 cm x 736.6 cm x 345.4 cm)
Wire rope diameter 1 /" Wire rope diameter
Front elevation view Drum size 30" x 55" (76.2 cm x 139.7 cm) Drum size 36" x 71" (91.4 cm x 180.3 cm)
Front elevation view
Continuous power 1,800 Hp Continuous power 3,000 Hp
Intermittent power 2,000 Hp Intermittent power 3,600 Hp
Skid dimensions (L x W) 247" x 108" (627.4 cm x 274.3 cm) Skid dimensions (L x W) 319" x 108" (910.3 cm x 274.3 cm)
Brakes 1 x 36" Brakes 2 x 36"
Brake disc cooling method Air cooling Brake disc cooling method Air cooling
Gearbox 1 x GB-15 Gearbox 2 x GB15
DRILLING MOTOR DRILLING MOTOR

Type NOV Dm-27 Type NOV CM632UUT
Number of motors 2 Number of motors 2
HP per motor 1,150 HP HP per motor 1,500 HP
Plan view
Plan view
ADS-1500 SS ADS-2000SD

Max hook load 8 lines 286.6 sT (260 mT) Max hook load 8 lines 352 sT (319 mT)
Weight 53,000 lbs (24,040 kg) Weight 63,500 lbs (28,803 kg)
135.6" x 163" x 107.2" 250.5" x 121" x 106.8"
Dimensions (LxWxH) Dimensions (LxWxH)
(344.4 cm x 414 cm x 272.3 cm) (636.3 cm x 307.3 cm x 271.3 cm)
Wire rope diameter 1 / Wire rope diameter 1 /
Front elevation view Drum size 30" x 55" (76.2 cm x 139.7 cm) Front elevation view
Drum size 30" x 55" (76.2 cm x 139.7 cm)
Continuous power 1,500 Hp Continuous power 2,000 Hp
Intermittent power 2,000 Hp Intermittent power 2,000 Hp
Skid dimensions (L x W) 91.5" x 191.5" (232.4 cm x 486.4 cm) Skid dimensions (L x W) 247" x 108" (627.4 cm x 274.3 cm)
Brakes 1 x 36" Brakes 1 x 36"
Brake disc cooling method Air cooling Brake disc cooling method Air cooling
Gearbox 1 x GB-15 Gearbox 1 x GB-15

DRILLING MOTOR DRILLING MOTOR
Type NOV CM632UUT Type NOV Dm-27
Number of motors 1 Number of motors 2
HP per motor 1,500 HP per motor 1,150 HP
Plan view
Plan view

DSGD-375 & SSGD-250 Drawworks *For reference only, please contact your local sales contact for more information.
The DSGD-375 drawworks features a direct drive design ideal for rig mover for the drawworks. Emergency brakes (2) are spring applied, SSGD-250 drawworks is a single speed, gear driven drawworks rated at rigs. Service braking is achieved using the AC motor which is also the prime
applications where space, weight, and power are important considerations. pneumatic release calipers 1,500 HP driven by a single AC drilling motor. Because of its low weight and mover. Emergency brakes (2) are spring applied, hydraulic release calipers.
Service braking is achieved using an AC motor, which is also the prime compact size, the SSGD-250 is easy to transport, making it ideal for land The SSGD-250 is provided with a dedicated HPU for brake operation.
DSGD-375 SSGD-250

Max hook load 12 lines 375 sT (340.2 mT) Max hook load 8 lines 250 sT (226.8 mT)
Max hook load 10 lines 318.5 sT (288.9 mT) Max hook load 6 lines 191 sT (173.3 mT)
Weight 68,746 lbs (31,183 kg) 305 fpm @ 60,000 lbs
Max block speed 8 lines
1.55 m/s @ 725 kN)
282.4" x 163.1" x 105.4"
Dimensions (LxWxH) Weight 71,309 lbs (32,345 kg)
(717.3 cm x 414.3 cm x 267.7 cm)
221.0" x 137" x 117.6"
Wireline size 1 /" Dimensions (LxWxH)
(561.3 cm x 348 cm x 298.7 cm)
Wire rope diameter
Maximum ambient temperature 104°F (40°C)
Drum size 36" x 71" (91.4 cm x 180.3 cm)
Drum size 27" x 56" (68.6 cm x 142.2 cm)
Drum diameter @ root of grooving 26.5" (67.3 cm)
Drum diameter @ root of grooving 28" (71.1 cm)
Continuous power 1,500 Hp
Continuous power 1,500 Hp
Intermittent power 1,800 HP
Intermittent power 1,800 Hp
Lube pump rating 22 GPM @ 150 PSi
Oil sump capacity 100 US Gal. (379 L)
Oil slump capacity 226 US GAL. (857 L)
19 gpm @ 250 psi (72L/min @ 1,724
Lube pump rating
kPa) Document No. 10840438-MAN
Page 14 Skid dimensions (L x W) 221" x 108" (561.3 cm x 274.3 cm)
Skid dimensions (L x W) 282.4" x 130" (717.3 cm x 330.2 cm) 3.4 Hook Load Chart
TSGD-375-28-56-12L-6H (2nd layer) GEAR RATIO
GEAR RATIO
800,000
SSGD-250-1500-26.5-34-9 Overall gear ratios 9:1
2nd Layer Performance
High gear 7.99:1 600,000
700,000 BRAKES
Low gear 11.95:1
600,000 500,000 Number of brake discs 2
BRAKES
Brakes 2 x 36" (2 x 91.4 cm)
Hook Load (lbs.)
500,000 400,000
8 LINES LOW Number of brake discs 2
Hook Load (lbs.)

12 LINES LOW Brake disc cooling method Air cooling
400,000
8 LINES HIGH Brake disc cooling method Air cooling 300,000
6 LINES
8 LINES
12 LINES HIGH Brake disc diameter
300,000 Brake disc diameter 72" (182.9 cm)
200,000 DRILLING MOTOR
200,000 Brake disc thickness 4" (10.2 cm) Type NOV CM632UUT
100,000
100,000 DRILLING MOTOR Number of motors 1
Type NOV CM632UUT HP per motor 1,500
0 0
0 100 200 300 400 500 600 Number of motors 1 0 50 100 150 200 250 300 350 400
Block Speed (ft/min)
Block Speed (ft/min) HP per motor 1,500
www.nov.com

Power Generation
26. Compact Drive System

Compact Drive Systems *For reference only, please contact your local sales contact for more information.
Compact Drive Systems - Liquid Cooled

Compact Drive LC
The Compact Drive LC (Liquid Cooled) systems share
all the features with Drill Force LC systems but with a
the best reliability and seamless integration with NOV

control systems and machinery. NOV proprietary
liquid cooling design provides the best cooling
capacity and redundancy. High thermal dissipation
guarantees the continuous drilling and breaking
operations without thermal failures.
Features
• Onboard pre-charge circuitry
• 6/12/18/24 pulse configurable
• Reduced height and footprint to fit any tight space
• Reserve cooling tank
Compact Drive Liquid Cooled Specifications • Isolation between modules for easy diagnostics
DC Bus Rating Rectifier Size Output Power Rated Temperature Ex. Temp. Range In. Max Press. Range Compliance • Induction / PM switchable firmware
4000 / 8000 A 3200 A 560/1120/1600 kW 40 / 45° C 35 / 75° C 20-60 psi IEC 61439 - 1 • Modular design and configure flexibility
Peak Fault Bracing Chopper Voltage Continuous Current Output Frequency Ex. Max Flow Range In. Max Flow Range IEC 61800 -1, -2, -3 • Excellent serviceability and accessibility
220 kA 900/1000/1100V selectable 583/1143/1697 A 0-300 Hz 80-110 GPM 100-160 GPM IEEE – 45 • Proven interface with NOV control and machinery
System IP Rating Chopper Continuous Power Overload Current Cable Entry Options Ex. Cooling Water Temp. Maximum Thermal Dissipation ABS MODU 2012
IP42 / IP 20 1200/2400 kW 872/1710/2538 A Bottom/Top 5-38° C 225 kW / 765 Btu/hr DNV
Compact Drive Systems - Air Cooled

Compact Drive AC
The Compact Drive AC (Air Cooled) Systems have
reduced height and footprint to meet the most
confined switchgear room design. With reduced
size, the compact drives still keep the reliability and
integration with NOV control systems and machinery.
Dedicated VFD sections provide more configurable
products and flexibility to arrange the VFD sections
Features
• Onboard pre-charge circuitry
• Dedicated VFD sections for each drilling equipment
• Reduced height and footprint to fit any tight space
• Induction / PM switchable firmware
• Modular design and configure flexibility
• Excellent serviceability and accessibility
Compact Drive Air Cooled Specifications
• Proven interface with NOV control and machinery
DC Bus Rating Rectifier Size Output Power Rated Temperature Compliance
4000 / 8000 A 2500 A 450/900/1400 kW 40 / 45° C IEC 61439 - 1
Peak Fault Bracing Chopper Voltage Continuous Current Output Frequency IEC 61800 -1, -2, -3
220 kA 900/1000/1100V selectable 486/953/1414 A 0-300 Hz IEEE – 45
System IP Rating Chopper Continuous Power Overload Current Cable Entry Options ABS MODU 2012
IP42 / IP 20 1200/2400 kW 727/1425/2116 A Bottom/Top DNV

Drilling Controls and
Instrumentation
30. Pharos sheet 1 & 2
31. Amphion

Pharos™ - Intrinsically Safe Wireless Data Acquisition (DAQ) System - Sheet 1 of 2 *For reference only, please contact your local sales contact for more information.
Description
Radio Node Battery Pack
maintenance, and extensible wireless system. Pharos is
wireless data-acquisition (DAQ) system that monitors many
instrument regions and tools. Patent-pending technology

optimizes battery life, with every bit of capacity going
toward meaningful work and automatically entering sleep
mode when not in use. The modular system approach
separates out the power source, radio transceivers, and
sensor bus through the use of connectorized, quick-
disconnect cabling.
Features
• Wireless data acquisition
• Low power requirements
• Long battery life
• Quick start up in all temperatures
• Reliable long range signal
• Easy to incorporate new signals
• Intrinsically safe OR
• Modular
• Quick-disconnect cabling
Applications
• Encoder position
• Inclination angle
• Proximity sensing
• Vibration monitoring Power & Communications J-Box
• Shock monitoring
• Torque/bending/hookload sensing
• Load-pin monitoring
• Pressure sensing
Radio Node
Each radio node comes equipped with one unamplified
transceiver and one amplified transceiver for additional
range. If even more range is needed, flash an additional
repeaters as needed to make sure the signal is strong.

Each radio node contains internal low-power sensors,
including two 3-axis accelerometers, a 3-axis gyroscope,
a temperature sensor, a primary battery fuel gauge, and a
proximity sensor on each face of the device. It also has an
external connector with a multi-functional GPIO and the
ability to power and communicate with external sensors on
the RS485 BUS.
Sensor BUS

Pharos™ - Intrinsically Safe Wireless Data Acquisition (DAQ) System - Sheet 2 of 2 *For reference only, please contact your local sales contact for more information.
Radio Node Hazardous Location Specifications

DEVICE ENTITY PARAMETERS MARKINGS
DEVICE MIN NOMINAL MAX UNITS DESCRIPTION
RADIO NODE For all configs: U_o = 6.51 V, P_i = P_o = 1.5 W, C_i = 130.93 uF, L_i = 17.11 uH IECEx:
BATTERY PACK - - - deg C Intrinsically Safe Battery Pack, IP 67, -40 to +60 deg When powered by Battery Pack: IECEx ETL 17.0002X: Ex ia [ia] IIB T4 Ga
In Zone 0: U_i = 3.9 V, I_o = I_i = 5.046 A, C_o = 92.68 uF, L_o=18.29 uH Ex ib [ib] IIB T4 Gb
Voltage Output - 3.6 3.9 V Voltage output of battery pack In Zone 1: U_i = 3.9 V, I_o = I_i = 0.409 A, C_o = 353.18 uF, L_o=312.59 uH -40°C ≤ T_amb ≤ +60°C
When powered by Power & Comms J-Box (-001) IP67
Current Output 320 - 625 mA Current trip value of active circuit. Min trip occurs @ 3.9V, max occurs @ 2V In Zone 0: U_i = 5.497 V, I_o = I_i = 1.306 A, C_o = 193.63 uF, L_o= 27.71 uH ATEX:
In Zone 1: U_i = 5.497 V, I_o = I_i = 0.567 A, C_o = 193.63 uF, L_o= 27.71 uH ITS17ATEX201639X
Power Output 1.25 - 1.4 W Power trip value of active circuit. Min trip occurs @ 2V, max occurs at 3V When powered by Power & Comms J-Box (-002) II 1 (1) G Ex ia [ia] IIB T4 Ga
In Zone 0: U_i = 5.497 V, I_o = I_i = 1.081 A, C_o = 193.63 uF, L_o= 27.71 uH II 2 (2) G Ex ib [ib] IIB T4 Gb
Battery Pack Capacity. Max occurs @ 8 mA load, 23 degrees C.
Capacity - - 19 A-hr BATTERY PACK When used in Zone 0: North America:
Consult NOV engineering for battery life calculations
U_o = 3.9 V, I_o = 5.046 A, P_o = 1.45 W, C_o = 223.61 uF, L_o = 35.4 uH Class 1, Zone 0, AEx ia IIB T4 Ga
When used in Zone 1: Class 1, Zone 1 AEx ib IIB T4 Gb
RADIO NODE - - - deg C Transceiver/Sensor Combination, IP67, -40 to +60 U_o = 3.9 V, I_o = 0.409 A, P_o = 1.45 W, C_o = 484.11 uF, L_o = 329.7 uH Class 1, Division 1, Groups C-D, T4, Ex ia
Class 1, Division 2, Groups C-D, T4, Ex ib
Voltage Input 2 3.6 5.5 V Required input voltage to Radio Node
ENCODER U_i = 6.51 V, I_i = 5.046 A, P_i = 1.625 W, C_i = 34.45 uF, L_i = 0 uH IECEx:
Voltage Output 4.82 5 5.13 V Voltage output of TPS61222 on pin 5, used to power sensor BUS IECEx ETL 17.0002X: Ex ia IIB T4 Ga
-40°C ≤ T_amb ≤ +60°C
Current Output - - 100 mA Current output of TPS61222 on pin 5, used to power sensor BUS IP67
ADXL362 Range +/- 2 - +/- 8 g Range of ADXL362 digital MEMs 3-axis accelerometer, 12-bit resolution ATEX:
ITS17ATEX201639X
ADXL362 Data Rate 12.5 - 400 Hz Sample and data output rate of ADXL362 II 1 G Ex ia IIB T4 Ga
ADXL375 Range - +/- 200 - g Range of ADXL375 digital MEMs 3-axis accelerometer, 13-bit resolution North America:
Class 1, Zone 0, AEx ia IIB T4 Ga
Class 1, Division 1, Groups C-D, T4, Ex ia
ADXL375 Data Rate 0.1 - 3200 Hz Sample and data output rate of ADXL375
POWER & COMMUNICATIONS J-BOX For (-001) when outputting to Zone 0: IECEx:
FXAS21002C Range +/- 250 - +/- 2000 deg/s Range of FXAS2100C digital MEMs 3-axis gyroscope, 16-bit resolution U_o = 5.497 V, I_o = 1.306 A, P_o = 1.5 W, C_o = 324.56 uF, L_o = 44.82 uH IECEx ETL 17.0002X: Ex nA [ia Ga] IIB T4 Gc
For (-001) when outputting to Zone 1: Ex nA [ib Gb] IIB T4 Gc
Temperature Sensor -40 - 125 Range of temperature sensing U_o = 5.497 V, I_o = 0.567 A, P_o = 1.5 W, C_o = 324.56 uF, L_o = 44.82 uH -40°C≤T_amb≤+60°C(-002)
For (-002) when outputting to Zone 0: -20°C≤T_amb≤+55°C (-001)
Transmit Frequency 2.405 - 2.48 GHz Transmission frequencies of MRF24J40MA/D, 802.15.4, 16 channels, 5MHz BW U_o = 5.497 V, I_o = 1.081 A, P_o = 1.285 W, C_o = 324.56 uF, L_o = 44.82 uH IP67
For (-002) when outputting to Zone 1: ATEX:
Transmit Power - 0 - dBm Transmission power of MRF24J40MA U_o = 5.497 V, I_o = 0.342 A, P_o = 1.285 W, C_o = 324.56 uF, L_o = 44.82 uH ITS17ATEX201639X
II 3 (1) G Ex nA [ia Ga] IIB T4 Gc
- 19 - dBm Transmission power of MRF24J40MD II 3 (2) G Ex nA [ib Gb] IIB T4 Gc
ENCODER - - - - Low Power, Absolute, Multi-Turn Encoder North America:

Class 1, Zone 2, AEx nA [ia Ga] IIB T4 Gc
Class 1, Zone 2, AEx nA [ib Gb] IIB T4 Gc
Voltage Input 3.3 5 6.5 V Required input voltage to encoder
Class 1, Div. 2, Groups C-D, T4
Associated Equip. Class 1, Div 1, Groups C-D, T4, (Ex ia)
Current Input - 10 - mA Typical supply current Class 1, Div. 2, Groups C-D, T4
Associated Equip. Class 1, Div 2, Groups C-D, T4, (Ex ib)
Pinout Resolution - - 1024 ppr Encoder angular resolution, 10-bit
POWER BARRIER When outputting to Zone 0: IECEx:
1 Battery Return Turns Rollover - - 65,536 revs Total turns before rollover U_o = 5.497 V, I_o = 1.081 A, P_o = 1.285 W, C_o = 324.56 uF, L_o = 44.82 uH IECEx ETL 17.0002X: Ex nA [ia Ga] IIB T4 Gc
When outputting to Zone 1: Ex nA [ib Gb] IIB T4 Gc
2 GPIO POWER & -001 version contains power supply and GM International D1061 Barrier U_o = 5.497 V, I_o = 0.342 A, P_o = 1.285 W, C_o = 324.56 uF, L_o = 44.82 uH -40°C≤T_amb≤+60°C(-002)
- - - -
COMMUNICATIONS J-BOX -002 version contains only power barrier
3 RS485 BUS HI ATEX:
40 (-001) ITS17ATEX201639X
Voltage Input 20 24 V Input Voltage to Power & Communications J-Box II 3 (1) G Ex nA [ia Ga] IIB T4 Gc
4 Battery Power (+3.6V) 30 (-002)
II 3 (2) G Ex nA [ib Gb] IIB T4 Gc
5 Sensor Power (+5V) Voltage Output 4.95 5 5.491 V Output voltage of power barrier
North America:
Class 1, Zone 2, AEx nA [ia Ga] IIB T4 Gc
6 Sleep Current Input - 50 - mA Typical supply current Class 1, Zone 2, AEx nA [ib Gb] IIB T4 Gc
7 RS485 BUS LO Current Output - 342 - mA Trip current of power barrier Associated Equip. Class 1, Div 1, Groups C-D, T4, (Ex ia)
8 Shield Power Output - 1.2 - W Trip power of power barrier Associated Equip. Class 1, Div 2, Groups C-D, T4, (Ex ib)

Amphion™ *For reference only, please contact your local sales contact for more information.
Amphion is National Oilwell Varco’s modular, fully integrated, networked, and field-proven seamless operations. Configurable, expandable and with a future-looking platform, the Amphion
control system adds value to your operations.
Amphion-FE Amphion-WAW Amphion-SUW

SIDE VIEW
SIDE VIEW
SIDE VIEW
SLIPS ENABLE IBOP
CLOSE OPEN
OVERRIDE
DRAWWORKS PARKING BRAKE
ON AUTO
OFF/
PUSH TO STOP
E-STOP
EQUIPMENT
DRILL FLOOR
SIDE VIEW
SIDE VIEW
TOP VIEW FRONT VIEW
SLIPS ENABLE IBOP
CLOSE OPEN
OVERRIDE
SLIPS ENABLE IBOP
ON AUTO
OFF/
CLOSE OPEN
PUSH TO STOP
OVERRIDE
ON AUTO
OFF/
E-STOP
PUSH TO STOP EQUIPMENT
DRILL FLOOR
SLIPS ENABLE IBOP
E-STOP
EQUIPMENT
CLOSE OPEN DRILL FLOOR
OVERRIDE
ON AUTO
OFF/
PUSH TO STOP
E-STOP
EQUIPMENT
DRILL FLOOR
SLIPS ENABLE IBOP
CLOSE OPEN
OVERRIDE
ON AUTO
OFF/
PUSH TO STOP
E-STOP
EQUIPMENT
DRILL FLOOR
TOP VIEW FRONT VIEW

TOP VIEW FRONT VIEW TOP VIEW FRONT VIEW
General Features: Control Features: General Features: Control Features: General Features: Control Features:
• Integrated Talkback system • Ergonomic joystick control • Integrated CCTV system • Emergency stop button(s) • Stand up workstation for pipe handling • Ergonomic joystick control
TOP VIEW FRONT VIEW operations
• Integrated CCTV system • Integrated control buttons and knobs • Electric weight indicator • Ergonomic joystick control • Integrated control buttons and knobs
• Optional cabin control integration (HVAC, • Optional trackball for remote HMI control • Optional cabin control integration (HVAC, • Integrated control buttons and knobs • Provides driller's workstation redundancy • Emergency stop button
wipers, lighting, etc.) • Emergency stop button(s) wipers, lighting, etc.) • Multiple levels of redundancy • Integrated Talkback system • Intuitive and user-friendly graphic interface
• Integrated drilling instrumentation through • Multiple levels of redundancy • Integrated drilling instrumentation through • Intuitive and user-friendly graphic interface • Integrated CCTV system • Touchscreen with fast response time
RigSense/MSI RigSense/MSI
• Intuitive and user-friendly graphic interface • Touch screens with fast response time • Touchscreen for monitoring and control • User selectable information displays
• Up to four touchscreens for monitoring and • Up to four touchscreens for monitoring and
control • Touchscreens with fast response time control • User selectable information displays • Adjustable height • Multiple language options
• Adjustable touchscreen position • User selectable information displays • Adjustable touchscreen position • Multiple language options • Adjustable touchscreen viewing angle • Selectable units of measure
• Multiple language options • Selectable units of measure • Alarms and diagnostic screens
Chair Features: • Selectable units of measure Chair Features: • Alarms and diagnostic screens
• Durable leather material • Alarms and diagnostic screens • Durable leather material
• Removable seat cover • Removable seat cover
• Adjustable pedestal support • Pedestal support
• 7-position electric adjustments including • Swing chair for sit/stand operation
height, rotation, setback angle and lumbar • 7 position adjustments including height,
support rotation, setback angle and lumbar support

Pressure Control Equipment
34. 6012 BOP
35. LXT BOP
36. SBOP

6012 BOP *For reference only, please contact your local sales contact for more information.
The 6012 Ram Type BOP is a rugged and powerful BOP capable of operating in a wide
range of service conditions. Harsh chemical environments and extreme temperatures
Xylan coating in the through bores, ram cavities and all wellbore wetted surfaces, 625
Nickel alloy inlay is included in all ring grooves, and hard plating on dynamic sealing
surfaces.
The 6012 can also be outfitted with large bore bonnets and tandem boosters in H
conjunction with SBRs or the Model 6000 Shear Blind Rams. The unit comes standard
with manual locking screws to ensure ram position in event of hydraulic pressure loss.
• Size range from 7” to 26 ¾”

• Configurable body
• Double and Single body C
• Shearing options
F C.O.G
• 625 nickel alloy D

• Xylan coating on all wellbore wetted surfaces J
• Hard plating on dynamic sealing surfaces
E H
• Hydraulic operation
Available Bonnet Options

• Standard fixed pipe and casing rams bonnets
• Shearing bonnets
• Shearing bonnets with tandem boosters
• Shear all bonnet
Available Ram Options

• Pipe and casing rams H
• VBR
• SBR
• 6000
• SAR
F C.O.G
Hydraulic Operating Data C

G
Standard Pipe Door Large Bore Shear W/Tandem Booster Door
Working
Bore Size
Pressure
Gallons to open Gallons to close Closing ratio Gallons to open Gallons to close Closing ratio Shearing Ratio C.O.G?
13-5/8'' 3000-10000 5.5 5.8 7.0:1 10.5 17.9 10.8:1 17.8:1
F
D
SINGLE - 13-5/8'' 10M E
OTLT Size STD "A" STD "B" LBS "A" LBS "B" LBS W/TB "A" LBS W/TB "B" "C" "D" "E" "F" "H" STD "K" STD "M" LBS "K" LBS "M" LBS W/TB "K" LBS W/TB "M"
FXF 4-1/16" 10M 107.8 [2738] 150.4 [3820] 114.0 [2897] 153.4 [3897] 151.2 [3839] 191.3 [4859] 32.6 [828] 29.8 [757] 41.5 [1054] 17.5 [445] 20.9 [531] 3.2 [81] 11.3 [287] 5.3 [134] 15.1 [384] 4.0 [101] 15.1 [384]
SXF 4-1/16'' 10M 107.8 [2738] 150.4 [3820] 114.0 [2897] 153.4 [3897] 151.2 [3839] 191.3 [4859] 32.6 [828] 29.8 [757] 41.5 [1054] 17.5 [445] 20.9 [531] 3.2 [81] 11.3 [287] 5.3 [134] 15.1 [384] 4.0 [101] 15.1 [384]
DOUBLE - 13-5/8'' 10M

OTLT Size STD "A" STD "B" LBS "A" LBS "B" LBS W/TB "A" LBS W/TB "B" "C" "D" "E" "F" "G" "H" "J" STD "K" STD "M" LBS "K" LBS "M" LBS W/TB "K" LBS W/TB "M" "C.O.G" STD Weight (DRY) LBS Weight (DRY) LBS W/TB Weight (DRY)
FXF 4-1/16'' 10M 107.8 [2738] 150.4 [3820] 114.0 [2897] 153.4 [3897] 151.2 [3839] 191.3 [4859] 67.7 [1720] 46.4 [1179] 58.1 [1476] 17.5 [445] 24.1 [612] 21.8 [554] 45.9 [1166] 3.2 [81] 11.3 [287] 5.3 [134] 15.1 [384] 4.0 [101] 15.1 [384] 33.8 [859] 22446 [10181] 22978 [10423] 23546 [10680]
SXF 4-1/16'' 10M 107.8 [2738] 150.4 [3820] 114.0 [2897] 153.4 [3897] 151.2 [3839] 191.3 [4859] 58.7 [1491] 29.8 [757] 41.5 [1054] 17.5 [445] 24.1 [612] 21.8 [554] 45.9 [1166] 3.2 [81] 11.3 [287] 5.3 [134] 15.1 [384] 4.0 [101] 15.1 [384] 32.8 [833] 22082 [10016] 22614 [10257] 23182 [10515]
13'' Shown, All other sizes (7'', 11'' 16'', 20'', 21'', 26'') available upon request.

LXT BOP(s) *For reference only, please contact your local sales contact for more information.
11-3M LXT
7-5M LXT 11-5M LXT 13-10M LXT

Special Features:
Benefits:
• Boltless BOP doors: The LXT incorporates the boltless BOP door
• 7'' bore and 3,000/5,000 psi WP • Smaller dimension (length and height)
locking system design, which enables opening and closing of the
• 11'' bore and 3,000/5,000 psi WP • Lighter weight
• Improved safety (no hammering bolts in confined areas) BOP door.
• 13-5/8'' bore and 3,000/5,000 psi WP • Improved Safety: Less manpower is needed to service the BOP and
• 13-5/8'' bore and 10,000 psi WP • Quicker ram changes
risks of injuries related to BOP ram access are reduced.
• 21-1/4'' bore and 5,000 psi WP • Easy ram access for faster and easier ram servicing
• Reduced Time for Ram Changes: Simple extraction of the two lock
• Standard H2S service
rods is accomplished without special tools, in significantly less time
• Most models compatible with Low Force Shears
than it takes to break out and re-torque conventional door bolts.
7'' 3/5K LXT Ram BOP Specifications 11'' 3/5K LXT Ram BOP Specifications 13-5/8'' 3/5K & 10K LXT Ram BOP Specifications
Technical Specifications Single Double Technical Specifications Single Double Technical Specifications Single Double Single Double
Bore Size 7'' 7'' Bore Size 11'' 11'' Bore Size 13-5/8'' 13-5/8'' 13-5/8'' 13-4/8''
Working Pressure 5,000 psi 5,000 psi Working Pressure 5,000 psi 5,000 psi Working Pressure 5,000 psi 5,000 psi 10,000 psi 10,000 psi
Piston Size 5'' 5'' Piston Size 8.5'' 8.5'' Piston Size 10'' 10'' 15.25'' 15.25''
Height Height Height

34.625'' 44'' 50.25'' 68.25''
FXF 25.125'' 34.875'' FXF 34.12'' 44.87'' FXF
26.25'' 39'' 39.625'' 57.625''
SXF 18.25'' 27.750'' SXF 25.38'' 36.13'' SXF
18'' 29'' 29'' 47''
SXS 11.5'' 20.750'' SXS 16.63 27.38'' SXS
Width 17.50'' 17.5'' Width 26.88'' 26.38' Width 42'' 42'' 44.43'' 44.43''
Length (handle to handle) 71.58'' 71.58'' Length (handle to handle) 80.38'' 80.38'' Length (handle to handle) 128.25'' 128.25'' 115.83'' 115.83''
Gallons to Open (1 set) .64 gallons .64 gallons Gallons to Open (1 set) 2.46 gallons 2.46 gallons Gallons to Open (1 set) 4.86 gallons 4.86 gallons 12.63 gallons 12.63 gallons
Gallons to Close (1 set) .63 gallons .63 gallons Gallons to Close (1 set) 2.80 gallons 2.80 gallons Gallons to Close (1 set) 5.12 gallons 5.14 gallons 12.88 gallons 12.88 gallons
Maximum Hydraulic Opening Pressure 3,000 psi 3,000 psi Maximum Hydraulic Opening Pressure 3,000 psi 3,000 psi Maximum Hydraulic Opening
3,000 psi 3,000 psi 3,000 psi 3,000 psi
Pressure
Closing Ratio 8.45 8.45 Closing Ratio 5.86 5.86
Closing Ratio 6.47 6.47 10.69 10.69
Maximum Pipe Size 5-1/2 '' 5-1/2'' Maximum Pipe Size 10.75'' 10.75''
Maximum Pipe Size 10.75'' 10.75'' 10.75'' 10.75''
Weights (lbs.)
5,300 14,185 17,000 26,700
FXF
4,7000 13,600 15,700 25,400
SXF
4,100 13,000 14,400 24,100
SXS

Spherical BOP *For reference only, please contact your local sales contact for more information.
wedge cover.
Nut
• Rugged, reliable sealing element provides positive Nut
Stud
Stud
• Strong, simple construction — only five major
parts. Shackle Locking Ring
• Compact body saves space. Height is 15 to 20%
less than height of some other annular BOPs.
• Simple hydraulic system. Only two hydraulic connections 13 - 5/8'' 5M SXF
are needed. Upper Housing Locking Segment
Connections
• Wear rings on moving parts prevent metal-to-metal
Size (in.) Bore (in.) W.P. (PSI) RG. GRV.
contact. This feature prolongs preventer life. Screw
• Suitable for H2S service. Standard models are Top 13 - 5/8'' 12 - 5/8'' 5,000 BX - 160
Key
suitable for internal H2S service, and simple bolt Bottom 13 - 5/8'' 13 - 5/8'' 5,000 BX - 160
Upper Housing
H2S service. Outlet As required As required As required As required
• Servicing is easy. Element can be changed without

getting mud or grit into the hydraulic system. Packing Element
Estimated Weight W/ Element
• Steel segments reinforce sealing element but do
not protrude into well bore when element is open. Configuration Weight
Packing Element
• Element design provides long stripping life. Seal Adapter Top Stud X Flange 17,518 Lbs (7,946 kg)
Seal Adapter OD
Seal Adapter OD
Adapter Ring
Seal Adapter Top
Wellbore Characteristics
Working Pressure 5,000 PSI (345 Bar) Adapter Ring
Test Pressure 7,5000 PSI (518 Bar)
Seal Adapter Upper ID
Seal Adapter Lower ID
Hydraulic Operator Characteristics
Piston Working Pressure 1,500 PSI (103 Bar) Piston
Test Pressure 2,250 PSI (155 Bar) Wear Ring
Volume to open 14.59 Gallons (55.2 Lts) Seal Piston OD
Wear Ring Volume to close 25.56 Gallons (96.8 Lts) Wear Ring
Seal Piston OD Hydraulic Connections (2) 1 - 1/2'' Female NPT Seal Piston Upper ID
Wear Ring Seal Piston Lower ID
Screw
Upper Housing Upper Housing
Seal Piston Upper ID
Upper Housing Upper Housing
Element
Seal Piston Lower ID Shackle
Element
Wear Ring Element
Element
Adapter Ring Adapter Ring
Lower Housing
Adapter Ring Adapter Ring
Piston
Piston Hydraulic Ports Lower Housing
Piston
Piston
Hydraulic Ports
Lower Housing Lower Housing
Lower Housing Lower Housing
Bolted Cover Configuration Wedge Cover Configuration
Working Pressure (psi) 4 1/16 7 1/16 9 11 13 5/8 16 3/4 18 3/4 20 3/4 21 3/4 30 (notAPI) Working Pressure (psi) 4 1/16 7 1/16 9 11 13 5/8 16 3/4 18 3/4 20 3/4 21 3/4 30 (notAPI)
10,000 X X 10,000 X X XX
5,000 X X X X 5,000 X XX XX XX
3,000 X X X X
XX - Wedge and Dual Wedge Configurations Available
2,000 X
1,000 X

Pumping and Circulation
38. 12-P160 Triplex Mud Pump
39. Brandt Centrifuges
40. Brandt Shakers
41. Brandt Shaker screens
42. Brandt Agitators

12-P-160 Triplex Mud Pump *For reference only, please contact your local sales contact for more information.
National Oilwell Varco's 12-P-160 Mud Pump provides smooth performance. The mud pumps advanced fluid end design gives exceptionally smooth Performance Data
It's construction is robust and durable for use in most environments. The triplex performance. In addition, this unique design facilitates fast
7" 6" 5"
12-P-160 is rated @ 1,600 input horsepower (1,193 kW) at 120 strokes per inspection and easy servicing. Compact engineering provides higher Liner Size, inches (mm)
(184.2) (177.8) (171.5) (165.1) (158.8) (152.4) (146.1) (139.7) (127) (114.3)
minute with a 12 inch (304 mm) stroke. Multiple liner sizes allow pressure
3,200 3,430 3,690 3,980 4,305 4,670 5,085 5,555 6,720 7,500
and volume to handle circulation in deep drilling applications. it easily adaptable to varied rig configurations. This provides flexibility as Max. Discharge pressure psi (kg/cm )
(225) (241.1) (259.4) (279.8) (302.7) (328.3) (357.5) (390.5) (472.4) (527.2)
drilling requirements and consditions change.
Speed Input Hyd.* Input GPM* GPM GPM GPM GPM GPM GPM GPM GPM
spm HP HP HP (LPM*) (LPM) (LPM) (LPM) (LPM) (LPM) (LPM) (LPM) (LPM)
772 720 669 621 574 529 486 444 367 297
120 † 1,600 † 1,440
(2,922) (2,724) (2,533) (2,349) (2,172) (2,002) (1,839) (1,682) (1,389) (1,124)
643 600 558 517 478 441 405 370 306 248
100 1,333 1,200
(2,435) (2,270) (2,111) (1,958) (1,810) (1,668) (1,533) (1,401) (1,158) (938)
515 480 446 414 383 353 324 296 245 198
80 1,067 960
(1,948) (1,816) (1,689) (1,566) (1,448) (1,334) (1,226) (1,121) (927) (750)
388 360 335 310 287 264 243 222 184 149
60 800 720
(1,461) (1,362) (1,267) (1,175) (1,086) (1,001) (920) (841) (697) (564)
257 240 223 207 191 176 162 148 122 99

40 533 480
(974) (908) (844) (783) (724) (667) (613.1) (561) (462) (375)
6.433 5.997 5.576 5.171 4.781 4.406 4.046 3.702 3.060 2.479
Volume/Stroke, gal. (Liters)
(24.35) (22.70) (21.11) (19.58) (18.10) (16.68) (15.32) (14.02) (11.58) (9.38)
L.H. Side of pump **Pressures shown are for optional 7,500 psi fluid end configuration. standard 12-P-160 mud pump is rated for 5,000 psi (351.5 kg/cm ), and considered
† Rated maximum input horsepower and speed
AC drive motor* Technical specifications

Motor type Standard DM27 Drill Force AC Cage induction motor Height, floor to center of front inlet suction, inches (mm)
Electrical rating Continuous duty Height, floor to center of discharge, inches (mm) 45 ¼ (1149)
-40°C to 45°C Overall length over skids, inches (mm) 209 (5309)
-40°C to 45°C Width over frame, inches (mm)
-40°C to 55°C 113 ¾ (2889)
-40°C to 55°C Height, floor to top of gear case, inches (mm) 75 (1905)
Insulation Class H, VPI form wound Height over fluid cylinders, inches (mm)
External cooling requirements 2,800 SCFM at motor inlet Maximum input horsepower (kW) 1600 (1193)
Classification ATEX, increased safety IECEx Rated pump speed, spm 120
Optional certification ABS, DNV, CSA Maximum fluid cylinder liner bore, inches (mm)
Standard stator and Bearing RTD's Stroke, inches (mm) 12 (304.8)
*Optional GEB-22 AC Cage Induction Motor Hydrostatic test pressure of fluid cylinders, psi (kg/cm2) 10,000 (703)
Gear ratio 3.439
Fluid End Modules Suction connection ASA-150 lb. R.J. flange, inches 10"
Discharge connection, cross w/ API-10,000 psi. R.J. flange, inches 6"
Plan view of pump pump model to select the fluid end module that exactly matches the Valve pot, API number MOD. 7
Plan view of pump

drilling requirements. The 12-P-160 can be equipped with either the Weight-complete, less sheave, lbs. (kg) 54,700 (24,810)
standard or premium forged, two-piece interchangeable fluid modules.
Power End Optional Accessories
• Fabricated steel frame construction • HydrA-LIGN™ piston rod • Cold worked for longer life - The internal bores of the standard modules
Performance 12-P-160
are shot peened. The premium modules have auto-frettage bores.
• • Blak-JAK™ liner retention system Liner size
The benefits of these processes are increased module fattigue life and
• Blak-JAK™ Torque master quick change valve cover retention system 4.5" 5.0" 6.0 " 6.5" 7.0" 7.25"
greater resistance to stress corrosion cracking
• Adaptability to a variety of drive arrangements on either sides or on both • Pneumatic pump rotation tool 7500
sides • High pressure modules
6750
• Warranties
Fluid End key features 6000
• Pressurized lubrication system • The standard module carries a three-year, 100% warranty against
cracking • Two-piece modular cylinder design is completely interchangeable 5250
between modules
Pressure (psi)
Belt Drive • The premium module has a four-year, 100% warranty against cracking 4500
• Belt life in excess of • Fast Change™ screw-type valve covers, which facilitate quick removal
• and installation are currently standard 3750
lowest cost of ownership in the industry
• Suction manifold can be equipped with front or side inlet connections 3000
• No requirement for lube oil filter, cables, cable trays, MCC cubicles, Quiet Blower
starters • 3000 scfm Quiet Blower emits approximately 82 dba • Discharge piping connects from either side 2250
*7500 psi
*6720 psi
4670 psi
3980 psi
3430 psi
3200 psi
• Piston and liner chambers are easily accessible and fully open 1550
Condition Monitoring
• Two-piece piston rod construction allows removal of piston without 750
• • Local display graphs the pump power end vibrations and temperatures
disturbing liner 0
• Naturally balanced for smooth running • Trending of pump data to identify and predict maintenance needs
• Easy-to-operate clamps give positive locking for liners and piston rod 297 367 529 621 720 772
• No casting • Can also be used to record pumping data (strokes pressure), which can assemblies Gallons Per Minute (GPM)
• No welding be exported via flash card to rig computer • Spray system cools and lubricates piston and liner surfaces *Both 5,000 psi or 7,500 psi are available

BRANDT™ Centrifuges *For reference only, please contact your local sales contact for more information.
HS-2172 HS-1960 HS-2000 HS-3400 VFD Control Cabinet
Description Description Description Description Description

The HS-2172 series centrifuge uses high G-forces to The HS-1960 series centrifuge uses high G-forces to The HS-2000 series centrifuge uses high G-forces The HS-3400 series centrifuge uses high G-forces to All variable frequency drive (VFD) enclosures are
separate fine solids from liquid. The HS-2172 centrifuge separate fine solids from liquid. The HS-1960 centrifuge to separate fine solids from liquid The HS-2000M is separate fine solids from liquid. Three models are designed the same for all centrifuges. VFD’s are rated
is able to exert up to 2,684 G’s on the drilling fluid. is able to exert up to 2,480 G’s on the drilling fluid. able to exert up to 2,617 G’s on the drilling fluid. The available: HS-3400FS, HS-3400VSD and HS-3400FVS. to match motor and load requirements and are
It is equipped with a variable frequency drive (VFD) It is equipped with a variable frequency drive (VFD) HS-2000M is equipped with a variable frequency drive The HS-3400FVS is able to exert up to 3,180 G's on the recognized by the American Bureau of Shipping & DNV
control which provides a controlled application of control which provides a controlled application of (VFD) control which provides a controlled application drilling fluid. With a process capacity up to 200 gal/ for hazardous area use. Designed for arctic, desert and
motor drive power to the centrifuge components. motor drive power to the centrifuge components. of motor drive power to the centrifuge components. min (757 l/min), the HS-3400 series centrifuge offer hazardous area service, where power disconnect is
With a process capacity up to 550 gal/min (2,082 lit/ With a process capacity up to 350 gal/min (1,325 lit/ With a process capacity up to 250 gal/min (946 lit/ outstanding performance over a wide range of drilling required for hazardous area duty.
min), the HS-2172 centrifuge is able to quickly process min), the HS 1960 centrifuge is able to quickly process min), the HS-2000M series centrifuge offers outstanding applications.
high volumes of mud while allowing prescribed mud high volumes of mud while allowing prescribed mud performance over a wide range of drilling applications
weights and separation efficiencies to be maintained. weights and separation efficiencies to be maintained. and conditions.
This enables the HS2172 centrifuge to produce fine cut This enables the HS-1960 centrifuge to produce fine cut
points at higher flow rates, making it ideal for high-flow points at higher flow rates, making it ideal for high-flow
applications and critical-conditions solids control. applications and critical-conditions solids control.
Technical Specifications Technical Specifications Technical Specifications Technical Specifications Technical Specifications
Part number 16680 Part number 20000 Part number 15670 Part number 10849 Weight 2646 lbs (1200 kg)
Water capacity 550 gpm (2082 lpm) Water capacity 350 gpm (1325 lpm) Water capacity 250 gpm (946 lpm) Water capacity 200 gpm (757 lpm) 95 in x 38 in x 93 in
Dimensions
(2413 mm x 965 mm x 2362 mm)
Weight 15500 lbs (7031 kg) Weight 11600 lbs (5262 kg) Weight 8800 lbs (7031 kg) Weight 4800 lbs (2177 kg)
Bowl diameter 21 in (533 mm) Bowl diameter 19.4 in (493 mm) Bowl diameter 18 in (457 mm) Bowl diameter 14 in (2177 mm)
Bowl length 72 in (1829 mm) Bowl length 60 in (1524 mm) Bowl length 60 in (1524 mm) Bowl length 49.5 in (1257 mm)
Bowl speed 3000 max; 2400 typical Bowl speed 3000 max; 2400 typical Bowl speed 3200 max; 2600 typical Bowl speed 3200 max; 2200 typical
Drive VFD Drive VFD Drive VFD Drive Fixed
G-Force 2684 G-Force 2480 G-Force 2617 G-Force 2036
174 in x 84 in x 47 in 180 in x 83 in x 44 in 172 in x 40 in x 48 in 98 in x 69 in x 44 in
Dimensions Dimensions Dimensions Dimensions
(4400 mm x 2134 mm x 1168 mm) (4572 mm x 2108 mm x 1118 mm) (4369 mm x 1016 mm x 1219 mm) (2489 mm x 1753 mm x 1118 mm)
Main drive (bowl) 150 hp Main drive (bowl) 125 hp Main drive (bowl) 75 hp Main drive (bowl) 40 hp
Back drive (conveyor) 40 hp Back drive (conveyor) 40 hp Back drive (conveyor) 30 hp Back drive (conveyor) N/A
Beach angle 5 Beach angle 5 Beach angle 5 Beach angle 10

Page 39 brandt@nov.com nov.com
BRANDT™ Shakers *For reference only, please contact your local sales contact for more information.
VSM 300™ KING COBRA™ VENOM™ MINI COBRA™ 3-Panel KING COBRA™ HYBRID
Description Description Description Description

The VSM 300 is a balanced elliptical motion, fine screen shaker which The KING COBRA VENOM shaker is a fine screen shaker with several The Mini COBRA 3-Panel Shaker is a fine screen shaker with several The KING COBRA HYBRID shaker combines the reliable KING COBRA
utilizes three screen decks, an integrated scalping deck, a primary motor/ starter options producing linear or tuned elliptical motion. The motor/ starter options producing linear motion. The Mini COBRA skid, back tank, and screen angle adjustment features with the
fine screen deck and a drying deck. This unit is ideal for offshore and KING COBRA VENOM is provides a lower profile than the KC Hybrid 3-Panel shaker is a smaller footprint and weir height design shaker for rugged KING COBRA VENOM shaker basket. The basket’s patented
clay/gumbo formations, it is an extremely simple machine to operate shaker. The VENOM utilizes CONSTANT-G CONTROL technology which smaller land and workover rigs. The shaker is almost always located at CONTOUR PLUS™ design reduces the liquid pool depth to provide
requiring little maintenance. The primary screen deck employs a increases the shakers G-Force during drilling operations to optimize the flow line unless it is preceded by a “scalping” or gumbo separator. better conveyance of drilled solids across the screens. Configured for
PNEUMOSEAL™ bladder system for securing the screens. The screen capacity and finer screening. The shaker is almost always located at The shaker removes a large percentage of drill cuttings before the mud 0° at the feed panel and +5° on the remaining panels, the CONTOUR
changes can be carried out in 2-3 minutes by one operator. This unit the flow line unless it is preceded by a “scalping” or gumbo shaker. The is circulated through the surface mud system, leading to improved PLUS design minimizes basket angle elevation and achieves drier solids
has a fixed deck angle of 0° in the feed zone and 7° on the incline screen KING COBRA VENOM shaker removes a large percentage of drill cuttings performance of downstream solids control equipment. and increased screen life by decreasing the mud pool weight over the
ramp. No adjustments are required. before the mud is circulated through the surface mud system leading to screens.
improved performance of downstream solids control equipment.

Vibration Balanced Elliptical Vibration Linear and tuned elliptical Vibration Linear Vibration Linear or Dual
(3) Screens Scalping Dec (0°) Screens and Deck Type (4) Screens Contour Plus (0°, +5°, +5°, +5°) Screens and Deck Type (2) Screens (0°, +5°, +5°) Screens and Deck Type (4) Screens (0°, +5°, +5°, +5°)
Screens and Deck Type (4) Screens Primary Deck (+7°) Basket Angle Adjustable (0° to 3°) Basket Angle Adjustable -5° to +3°)
(2) Screens Drying Deck (+7°) Basket Angle Adjustable (-2° to +2°)
Special Features Pneumatic Basket Adjustment Special Features N/A Special Features N/A
Basket Angle Fixed
Screen Type Pretension Repairable Screen Type Pretension Repairable Screen Type Pretension Repairable
Special Features Pneumatic Screen Clamping
8.3 Nominal G's with CONSTANT-G-CONTROL™ 7.3-8.3G's 9 - in loaded G-Force 6.6 Nominal G's Fixed nominal
Screen Type Pretension Repairable G-Force • 6.1 G’s - 2.5 hp
drilling conditions Deck Area 25.4 ft2 (2.4m2)
Automatically adjusts to drilling conditions with CONSTANT-G-CONTROL™ • 7.4 G’s- 2.5 hp “High-G” option
G-Force Deck Area 33.4 ft2 (3.1 m2) Motor Data (2) 2.5 hp (1.9 kw) • 8.0 G’s - 3.5 hp
5.3-6.3-7.3 G's G-Force
Motor Data (2) 3.5 hp (2.6 kw) With CONSTANT-G CONTROL - patented worldwide:
20.5 ft (1.9 m )
2 2 Weir Height 24 in. (610 mm)
• Automatically - sustained settings as loading increases or decreases
Deck Area 26.3 ft2 (2.4 m2) Weir Height 34.5 in. (867 mm) 105 in x 66 in x 53 in • 6.3 G optimal - 2.5 hp
3 ft2 (0.3 m2) Dimensions
121 in x 67 in x 63 in (2657 mm x 1680 mm x 1346 mm) • 7.3 -8.3 G optimal - 3.5 hp
Motor Data (2) 4.0 hp (3.0 kw) Dimensions
(3077 mm x 1711 mm x 1600 mm) Weight 3800 lbs (1724 kg) Deck Area 33.4 ft2 (3.1m2)
Weir Height 39 in. (991 mm) Weight 4500 lbs (2043 kg) 2.5 hp (1.9 kW) each - Standard
Motor Data
108 in x 74 in x 59 in 3.5 hp (2.6 kW) each - Optional
Dimensions
(2754 mm x 1870 mm x 1505 mm) Weir Height 24 in. (610 mm)
Weight 5370 lbs (2436 kg) 105 in x 66 in x 53 in
Dimensions
(2657 mm x 1680 mm x 1346 mm)
Weight 5300 lbs (2404 kg)
ATEX Zone 1, CE Ex II 2 G c IIB T4 Gb; Ta -20°C to +40/55°C
Optional Certifications • No CGC: Ta -20°C to +55°C
• CGC: Ta -20°C to +40°C

BRANDT™ Shale Shaker Screens *For reference only, please contact your local sales contact for more information.
VENOM™ Screens VSM-300™ Screens VSM™ Multi-Sizer Screens
Description Description Description

The VENOM series shale shaker screens utilize an advanced frame design and unique mesh The VSM 300 series shale shaker screens utilize an advanced frame design and unique mesh The VSM Multi-Sizer series shale shaker screens utilize an advanced frame design and unique mesh
combinations to effectively and efficiently separate detrimental drilled solids from drilling fluid. combinations to effectively and efficiently separate detrimental drilled solids from drilling fluid. All VSM combinations to effectively and efficiently separate detrimental drilled solids from drilling fluid. All
VENOM series screens are designed to fit all COBRA™, KING COBRA™, and LCM-3D series shale 300 Series Screens are API RP 13c Compliant. VSM Multi-Sizer Series Screens are API RP 13c Compliant.
shakers. All VENOM Series Screens are API RP 13c Compliant.
Technical Specifications Technical Specifications Technical Specifications

VENOM SCREENS VSM 300 PRIMARY SCREENS VSM MULTI-SIZER PRIMARY SCREENS
Available Mesh MG, XF, RHD, PXL Available Mesh XF, RHD, PXL Available Mesh XF, RHD, PXL
MG API Availability 20, 30, 40 XF API Availability 60, 70, 100, 120, 140, 170, 200, 230, 270, 325, 400 XF API Availability 270, 325, 400, 425
MG Cut Point Range 900µ– 426µ(Depending on API Size Selected) XF Cut Point Range 261µ – 38.8µ (Depending on API Size Selected) XF Cut Point Range 51.3µ – 32.5µ (Depending on API Size Selected)
MG NBOA 0.50 m² XF NBOA 0.33 m² XF NBOA 0.32 m²
XF API Availability 60, 70, 80, 100, 120, 140, 170, 200, 230, 270, 400 RHD API Availability 50, 60, 70, 80, 100, 120, 140, 170, 200 RHD API Availability 45, 60, 70, 80, 100, 120, 140, 170, 200
XF Cut Point Range 267µ – 39.2µ (Depending on API Size Selected) RHD Cut Point Range 323µ – 81.6µ (Depending on API Size Selected) RHD Cut Point Range 334µ – 78.3µ (Depending on API Size Selected)
XF NBOA 0.50 m² RHD NBOA 0.33 m² RHD NBOA 0.32 m²
RHD API Availability 45, 50, 60, 70, 80, 100, 120, 140, 170, 200 PXL API Availability 80, 100, 120, 140, 170, 200, 230, 270, 325 PXL API Availability 80, 100, 120, 140, 170, 200, 230, 270, 325
RHD Cut Point Range 334µ – 69.9µ (Depending on API Size Selected) PXL Cut Point Range 192µ – 47.5µ (Depending on API Size Selected) PXL Cut Point Range 192µ – 47.5µ (Depending on API Size Selected)
RHD NBOA 0.50 m² PXL NBOA 0.33 m² PXL NBOA 0.40 m²
PXL API Availability 80, 100, 120, 140, 170, 200, 230, 270, 325 Dimensions (LxWxH) 35.5 in x 27 in x 1 5/8 in Dimensions (LxWxH) 36.8 in x 26.9 in x 1.0 in (935 mm x 683 mm x 25 mm)
PXL Cut Point Range 192µ – 47.5µ (Depending on API Size Selected) Weight 22 lbs (9 kg) Weight 30 lbs (13 kg)
PXL NBOA 0.47 m² VSM 300 SCALPER SCREENS VSM MULTI-SIZER SCALPING SCREENS
Dimensions 49 in x 25 in x 1 in (1250 mm x 635 mm x 25 mm) Available Mesh MG Available Mesh MG
Weight 32 lbs (14.5 kg) Scalper API Availability 10, 12, 20, 30, 45, 50, 60, 80, 100 Scalper API Availability 10, 12, 14, 18, 25, 30, 40, 45, 60
Scalper Cut Point Range 2027µ – 150µ (Depending on API Size Selected) Scalper Cut Point Range 60µ – 10µ
Scalper NBOA 0.36 m2 Scalper NBOA 0.39 m2
Scalper Weight 34 lbs (15 kg) Scalper Weight 18 lbs (8 kg)
Scalper Dimensions (LxWxH) 35.9 in x 26.6 in x 1.5 in (937 mm x 676 mm x 38 mm) Scalper Dimensions LxWxH) 36.9 in x 26.5 in x 1.1 in (937 mm x 673 mm x 27 mm)

BRANDT™ Agitators *For reference only, please contact your local sales contact for more information.
MA-20RG MA-10RG MA-RGC
Description Description Description

The MA-RG series mud agitators are horizontally mounted motor with a The MA-RG series mud agitators are horizontally mounted motor with a The MA-RG-C horizontal agitator uses a triple reduction helical bevel gearbox driven by a C-face motor with a close coupling
helical-bevel gearbox. They are heavy duty mechanical mixers used for helical-bevel gearbox. They are heavy duty mechanical mixers used for style. This variation also features a base plate instead of a mounting skid, reducing the overall height.
viscous fluids such as drilling fluids. The gearbox utilizes a helical-bevel viscous fluids such as drilling fluids. The gearbox utilizes a helical-bevel
gear drive system that reduces the rotational speed of the motor to gear drive system that reduces the rotational speed of the motor to Impellers
drive the impeller(s). MA-RG series agitators are very compact. Their drive the impeller(s). MA-RG series agitators are very compact. Their Impellers are available with flat blades (radial flow), contour blades (axial flow) and canted blades (radial/axial flow). The
low profile reduces headroom requirements and provides more layout low profile reduces headroom requirements and provides more layout impellers are sized according to tank volume and expected duty. Active mud system compartments such as solids removal
space on top of the tanks. The 1:1 height to width ratio results in a lower space on top of the tanks. The 1:1 height to width ratio results in a lower sections, mud mixing sections, and slug pits which need a higher shear force to produce immediate mixing, are another
center of gravity, providing stability and safety should the impeller center of gravity, providing stability and safety should the impeller consideration in impeller sizing.
encounter a sudden shock load. MA-RG agitators use a mounting encounter a sudden shock load. MA-RG agitators use a mounting
skid for robust installation. They also utilize the same impellers as skid for robust installation. They also utilize the same impellers as Shafts
the VMAI Agitators, the main difference being the size and mounting the VMAI Agitators, the main difference being the size and mounting Several types of shafts are offered. Mild steel shafts are cut to length and joined to the gearbox output shaft with a rigid
configuration. Multiple sizes and locations of impeller configurations configuration. Multiple sizes and locations of impeller configurations coupling. Solid shafts are keyed at the bottom for adjustment of impeller height. Hollow pipe shafts are available on select
are available. MA-RG agitators are sized to meet all drilling rigs needs are available. MA-RG agitators are sized to meet all drilling rigs needs models for use in deep tanks. They are supplied in flanged sections and bolted together making them ideal when lifting
and have a large and successful install base worldwide. and have a large and successful install base worldwide. height is limited.
Technical Specifications Technical Specifications Features

Length: NEMA: 59 in (1499 mm) IEC: 65 ¾ in (1670 mm) Length: NEMA: 46 ⅜ in (1177 mm) IEC: 46 ⅜ in (1177 mm)
• Explosion proof motors & starters (optional)
Dimensions Dimensions
(less shaft and impeller)
Width: NEMA: 27 ¾ in (704 mm) IEC: 23 in (582 mm)
(less shaft and impeller)
Width: NEMA: 26 in (660 mm) IEC: 26 in (660 mm) • Provides optimal mixing
Height: NEMA: 26 ⅛ in (663.6 mm)IEC: 30 in (760 mm) Height: NEMA: 20 ¼ in (512 mm) IEC: 20 ½ in (521 mm) • Triple reduction helical gearbox
Weight 1300 lb (590 kg) Weight 750 lb (340 kg) • Baseplate mounted & motor direct mounted
Gearbox Helical-Bevil Gearbox Helical-Bevel
Nominal Gearbox Ratio 31:28:1 Nominal Gearbox Ratio 34:39:1 Benefits
Maximum Torque 42,480 in-lb (4,799.6 Nm) Maximum Torque 24,780 in-lb (2,799.76 Nm) • Can be used in a variety of locations
Impeller Shaft Diameter 3.25 in (82.6 mm) Impeller Shaft Diameter 3 in (76.2m) • Lowers mud cost
Impeller Shaft Weight 28.2 lb/ft (35.7 kg/m) Impeller Shaft Weight 24 lb/ft (35.7 kg/m) • Quiet, efficient, low operational temperature
• Small footprint
• Requires less headroom
Model hp/kW Length Width Height Weight
MA-3RG-C 3 hp (2.2kW) NEMA: 34 1/2 in. (876mm) NEMA: 17 in (432 mm) NEMA: 11 1/8 in (283 mm) 340 lb (154.2 kg)
MA-5RG-C 5 hp (3.7 kW) NEMA: 37 ½ in (952 mm) NEMA: 17 in (432 mm) NEMA: 11 ¼ in (286 mm) 351 lb (159.2 kg)
MA-7.5RG-C 7.5 hp (5.6 kW) IEC: 40 ⅛ in (1019 mm) IEC: 16 in (407 mm IEC: 12 ⅝ in (321 mm) 481 lb (218.2 kg)
MA-10RG-C 10 hp (7.5 kW) NEMA: 45 ½ in (1156 mm) NEMA: 21 in (533 mm) NEMA: 13 ⅜ in (341 mm) 685 lb (311 kg)
MA-15RG-C 15 hp (11.2 kW) NEMA: 50 ½ in (1283 mm) NEMA: 22 in (559 mm) NEMA: 14 ¾ in (375 mm) 839 lb (381 kg)

Engineering Tables *For reference only, please contact your local sales contact for more information.
Multiply By To Obtain Multiply By To Obtain Other Calculations

Acre Feet 7758 Barrels Horsepower 745.7 Watts HP = T x N
Acres 0.4047 Hectares Horsepower 550 Foot Pounds Per Second 5252
Acres 43560 Square Feet Inches 2.54 Centimeters For Rotating Objects
Atmospheres 1.00323 Kilograms Per Sq Centimeter Inches 0.0254 Meters N = Speed (rpm)
Atmospheres 14.696 Pounds Per Square Inch Inches Mercury (60 Degrees F) 1.1308 Feet Water (60 Degrees F) HP = F x V
Barrels 5.614 Cubic Feet Kilograms 35.2739 Ounces 33000
Barrels 0.15898 Cubic Meters
Objects in Linear Motion
Kilograms 2.20462 Pounds (ADVP)
F = Force (lbs)
Barrels 42 Gallons Kilograms 0.001102 Short Tons
Barrels Per Day 0.15898 Kiloliter a Day Kilograms Per Cubic Meter 0.0624 Pounds Per Cubic Foot HP = GPM x Head x Specific Gravity
Barrels Per Day 0.15625 Metric Tons a Day Kilograms Per SQ Centimeter 14.223 Pounds Per Square Inch
HP= GPM x PSI
Bars 14.503 Pounds Per Square Inch Kilometers 3280.8 Feet
Centimeters 0.032808 Feet Kilometers 0.6214 Miles (Statute)
GPM = Gallons Per Minute
Centimeters 0.3937 Inches Kilowatts 1.3405 Horsepower
For Pumps
Centimeters 0.010936 Yards Liters Per Hour 0.0044 Gallons Per Minute
PSI = Pounds per Inch
Cubic Centimeters 0.06102 Cubic Inches Liters 0.2642 Gallons
Cubic Centimeters 0.03381 Fluid Ounces Liters 0.03531 Cubic Feet Specific Gravity of Water = 1.0
1 CuFt per SEc. = 448 GPM
Cubic Feet 0.02832 Cubic Meters Liters 61.025 Cubic Inches
Cubic Feet 7.48 Gallons Liters Per Second 2.1189 Cubic Feet Per Minute 62.36 lbs per CuFt at 62F
Cubic Feet 28.316 Liters Liters Per Second 15.8507 Gallons Per Minute HP= CFM x PSF
Cubic Feet Per Minute 0.04719 Liters Per Second Meters 3.2808 Feet HP = CFM x PIW
Cubic Feet Per Minute 0.028317 Cubic Meters Per Minute Meters 39.37 Inches
Cubic Feet-Water (60 Degrees F) 62.366 Pounds (AVDP) HP= CFM x PSI
Meters 1.0936 Yards
Cubic Inches 16.387 Cubic Centimeters Miles (Statute) 1.6093 Kilometers
For Fans and Blowers
Cubic Inches 0.01639 Liters Millimeters 0.03937 Inches
CFM = Cubic Feet per Minute
PSF = Pounds per Square Foot
Cubic Meters 6.289 Barrels Pounds (AVDP) 0.4536 Kilograms PIW = Inches of Water Gauge
Cubic Meters 35.3146 Cubic Feet Pounds Per Square Inch 70.069 Grams Per Sq Centimeters PSI = Pounds per Square Inch
Cubic Meters 1.30795 Cubic Yards Pounds Per Square Inch 0.07031 Kilograms Per SQ Centimeter
Cubic Meters 264.172 Gallons SQ Centimeters 0.155 Square Inches Note: Gallons are US gallons unless otherwise specified. Barrels are 42 US gallons.
Cubic Meters Per Hour 4.4028 Gallons Per Minute Square Feet 0.0929 Square Meters
Feet 30.48 Centimeters Square Inches 6.4516 SQ Centimeters
Feet 0.3048 Meters Square Inches 645.16 Square Millimeters
Gallons 0.02381 Barrels SQ Kilometers 0.3861 Square Miles
Gallons 0.003785 Cubic Meters Square Meters 10.7639 Square Feet
Gallons 231 Cubic Inches Square Meters 1.959 Square Yards
Gallons 3.785 Liters Square Miles 640 Acres
Gallons Per Minute 34.296 Barrels Per Day SQ Millimeters 0.00155 Square Inches
Gallons Per Minute 227.1 Liters Per Hour Square Yards 0.8361 Square Meters
Gallons Per Minute 0.00105 Liters Per Second Tons (Short) 907.184 Kilograms
Gallons (IMP) 1.201 Gallons Tons (Short) 0.907184 Tons (Metric)
Gallons Water (60 Degrees F) 8.337 Pounds (AVDP) Tons (Metric) 2204.622 Pounds (AVDP)
Grams 0.0353 Ounces Tons (Metric) 1.1023 Tons (Short)
Grams Per Square Centimeter 0.0142 Pounds Per Square Inch Watts 0.00134 Horsepower
Grams Per Cubic Centimeter 0.0361 Pounds Per Cubic Inch Yards 91.44 Centimeters
Horsepower 0.7457 Kilowatts Yards 0.9144 Meters

National Oilwell Varco has produced this brochure for general Corporate Headquarters Rig Technologies Headquarters
information only, and it is not intended for design purposes. Although 7909 Parkwood Circle Drive 10353 Richmond Avenue
its contents, National Oilwell Varco in no way assumes responsibility Houston, Texas 77036 Houston, Texas 77042
for liability for any loss, damage or injury resulting from the use USA USA
of information and data herein. All applications for the material
described are at the user’s risk and are the user’s responsibility.
© 2018 National Oilwell Varco All Rights Reserved
rig@nov.com nov.com Rigdoc 100622415

Onshore Product Reference Guide PDF

Uploaded by

Copyright:

Available Formats

Onshore Product Reference Guide PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Onshore Product Reference Guide PDF

Uploaded by

Copyright:

Available Formats

Product Reference Guide

rig@nov.com | www.nov.com | pg. 3

The Ideal™ Series

Conventional Substructures and Drilling Masts — Ideal™ Series

*Fastline and Deadline sheaves not included

©National Oilwell Varco - All rights reserved - RigDoc 100496778

The Signature Series

• Racking board height can be adjusted within a range of dimension F so as to

Conventional Substructures and Drilling Masts — Signature Series

*Fastline and Deadline sheaves not included

©National Oilwell Varco - All rights reserved - RigDoc 100496778

Custom Terrain Series

Conventional Substructures and Drilling Masts — Terrain Series

Cellar/Clearance Height 19'-0" to 38'-0" 25'-6" 22'-0" Up to 20'-4"

*Fastline and Deadline sheaves not included

©National Oilwell Varco - All rights reserved - RigDoc 100496778

The Velocity™ Series

Conventional Substructures and Drilling Masts — Velocity Series

*Fastline and Deadline sheaves not included

Rapid Rig Slant Rig

©National Oilwell Varco - All rights reserved - RigDoc 100496778

the substructure and system controls. The integrated cable management

Value Added Benefits

• Reduced release-to-spud and required crane time

• Steel Toe 1000 walking feet

Clearance under substructure* 3 inches

Clearance under foot** 3 inches Ideal™ Rig Application

Maximum walking distance 120 feet

*when fully extended and includes substructure deflection

©National Oilwell Varco - All rights reserved - RigDoc 100498739

rig@nov.com | www.nov.com | pg. 9

TDS-11SA TDS-11SH TDS-10SH IDS-350PE

RATING CAPACITIES enhancements: Static Lock Brake enhancements: RATING CAPACITIES

Connection OD 4 in – 8½ in (101.6 mm – 215.9 mm)

©National Oilwell Varco - All rights reserved - RigDoc 100496733

BX3™ BX4-35™ BX4-50™

Technical specifications Technical specifications Technical specifications

©National Oilwell Varco - All rights reserved - RigDoc 100467188

SMX SLX SX SLX-DD

• 8C qualified • 8C qualified • 8C qualified • 8C qualified

Technical Specfications Technical Specifications Technical Specifications Technical Specifications

250 / 227 18 - 24.1/2 (457.2-622.3) 902 (409) 2.1/4(57) 3.1/2(89)

©National Oilwell Varco - All rights reserved - RigDoc 100464431 Rev. 1

SJH SJL SPL DSJX Heavy Duty SJX

The SJH horizontal pick up elevator is designed to pick

the tubulars prior to closing the elevator. The elevator is

and casing. It will handle single joints of pipe straight from

The SJX single joint elevator is designed for running single

Load Rating Max.

©National Oilwell Varco - All rights reserved - RigDoc 100463982 Rev. 1

BJ-250 BJ-350 FMS275 FMS375 Varco-500 14"

Description Description Description Description Description Description

©National Oilwell Varco - All rights reserved - RigDoc 100466354 Rev. 1

PS-15 PS-16 PSF PS-21

*Model shown above is the PS-16 with air cylinders on the

Technical Specifications Technical Specifications Technical Specifications Technical Specifications

Rotary size Rotary size Rotary size Rotary size

©National Oilwell Varco - All rights reserved - RigDoc 100464940 Rev. 1

Actuation Hydraulic Manpower interfering No