AUTOMATED

POWER
CATWALK

“ H E L P I N G O U R C U S T O M E R S A C H I E V E S U P E R I O R R E S U L T S ”
The Automated
Power Catwalk is
simple to use and
extremely robust. It
combines innovative
engineering and
proven manufacturing
techniques to deliver
a product that is
designed for the
optimum in personnel
safety, virtually
eliminating the need
for manual handling of
tubulars.
The Automated Power Catwalk from Canrig
is designed to individually index racked drill
collars, drill pipe and casing into a center carrier
where they can be lifted to the drill floor. It can
safely and efficiently raise tubulars and other
equipment such as subs, casing, logging tools or
utility baskets. It eliminates the need for pickup
and lay down services when running casing.
With its remote controlled capability, the unit can
be operated from the drill floor or from ground
level. Models are available to accommodate any
tubular from pickup subs and survey tools to
30-inch casing, and for almost every rig size and
configuration.
SPECIFICATIONS
MODEL 8000

65 ft - Range 2 doubles
TUBULAR LENGTH MAXIMUM
19,812mm – Range 2 doubles
30 in
TUBULAR OD MAXIMUM
762 mm
16,000 lbs
TUBULAR WEIGHT MAXIMUM
7,257 kg

CYCLE TIME 30 sec. carrier up (16,000 lb. tubular at 46 ft sub-height)

38 ft. to 50 ft
DRILL FLOOR HEIGHT RANGE
11,582mm to 15,240mm
42 in.
CATWALK DECK HEIGHT
1067mm
42ft H x 28ft-7in W X 92ft-8in L
WORKING DIMENSIONS
1,067mm H X 8,712mm W X 28,245mm L
Main skid: 13 ft-2 in H x 10 ft-2 in. W x 60 ft L
4,013mm H X 3,099mm W X 18,288mm L
TRANSPORT DIMENSIONS
Support skid: 9 ft-7 in H x 10 ft-2 in. W x 35 ft L
2,921mm H X 3,099mm W X 10,688mm L
137,000 lbs
WEIGHT TOTAL
62,142 kg

STANDARD HPU DRIVE SYSTEM Electric

SUPPLY POWER REQUIRED 600V/300 AMP, 60 Hz

MODEL* 2000 3000 4000

45 ft - Range 3 Single 45 ft - Range 3 Single 50 ft - Range 3 Single
TUBULAR LENGTH MAXIMUM OPTION 1
13,716 mm - Range 3 Single 13,716 mm - Range 3 Single 15,240 mm - Range 3 Single
65 ft - Range 2 Double
TUBULAR LENGTH MAXIMUM OPTION 2 N/A N/A
19,812 mm - Range 2 Double
13.375 in 20 in 24 in
TUBULAR OD MAXIMUM
340 mm 508 mm 610 mm
6,000 lbs 10,000 lbs 10,000 lbs
TUBULAR WEIGHT MAXIMUM
2,721 Kg 4,535 Kg 4,535 Kg

CYCLE TIME 18 seconds 20 – 50 seconds 30 – 50 seconds

12 ft to 18 ft 18 ft to 35 ft 22 ft to 40 ft
DRILL FLOOR HEIGHT RANGE
3,658 mm to 5,486 mm 5,486 mm to 10,688 mm 6,706 mm to 12,192 mm
42 in 26 in (*H) 42 in
CATWALK DECK HEIGHT OPTION 1
1,067 mm 660 mm 1,067 mm
42 in H x 28 ft 6 in W x 65 ft (R2D 74ft) L
42 in H x 30 ft 6 in W x 60 ft L 26 in H X 28ft 2 in W X 68 ft 2in L
WORKING DIMENSIONS 1,067 mm x 8,687 mm x 19,812 mm
1,067 mm x 9,296 mm x 18,288 mm 660mm X 8,687 mm X 20,777 mm
(R2D 22,555 mm)
7 ft 6 in H x 11 ft 6 in W x 60 ft L 9 ft 9 in H x 9 ft 7 in W x 61 ft 5 in L 9 ft 6 in H x 10 ft W x 60 ft L
TRANSPORT DIMENSIONS
2,286 mm x 3,505 mm x 18,288 mm 2,972 mm x 2,921 mm x 18,720 mm 2,896 mm x 3,048 mm x 18,288 mm
35,000 lbs 60,000 lbs 76,000 lbs
WEIGHT TOTAL
15,875 Kg 27,515 Kg 34,473 Kg

STANDARD HPU DRIVE SYSTEM Electric Electric Electric

SUPPLY POWER REQUIRED OPTION 1 480V / 85 AMP 480V / 85 AMP 480V / 111 AMP

SUPPLY POWER REQUIRED OPTION 2 600V / 68 AMP 600V / 68 AMP 600V / 90 AMP

* Additional models are available for work over rigs

PADWALKER™ AND
HYDRAULIC RAMP PIVOT

Pad drilling solutions continue to evolve speed of 60 feet per hour, it keeps pace
and improve, walking rigs with crane-less with existing rig walking systems and moves
rig-up are quickly becoming a typical feature in forward, backward, sideways or diagonal
on location. Canrig Drilling Technology’s directions. Control of both the PadWalker™
PadWalker™ was created as a result of this and the Hydraulic Ramp Pivot is accomplished
revolution. through the wireless remote control.

In the past, the catwalk ramp was typically These product enhancements are available
erected into the working position by using on a stand-alone basis, however, pairing the
a crane and the catwalk itself was moved PadWalker™ module with the hydraulic pivot
around location with a truck. By integrating feature eliminates the need for trucks and
hydraulic cylinders into the base and utilizing cranes to move the catwalk on the drilling
a unique pivot design, the catwalk is able pad. The catwalk is ready to be “walked”
to raise and lower the ramp to and from by disengaging the ramp from the rig
the working position once connected to rig substructure. Not only does this promote
power. cost efficiencies while pad drilling, but it
also allows convenient and ready access for
The PadWalker™ module is simple in design, substructure or BOP maintenance.
easy to maintain, affordable and may be
retrofitted to existing catwalks. At a walking

DESCRIPTION IMPERIAL METRIC

LIFT (PER PAD) 25,000 lb 11, 340 kg

WEIGHT (PER PAD) 600 lb 272 kg

WORKING PRESSURE 2,500 psi 172 bar

MAX GROUND CLEARANCE 5 7/16 in 13.8 cm

HORIZONTAL STROKE 12 in 30.5 cm

ORIENTATION Eight 45º vectors from 0º through 360º

WORKING SPEED* 12 in/minute 30.5 cm/minute

* Takes into account arranging of pad orientations to facilitate directional movement of the catwalk during normal operations,
Cyclic speed is higher.
Canrig is committed to continually delivering increased value to our customers. In most cases,
product enhancements can be retrofitted to existing catwalks, this keeps them working at peak
performance and brings our customers new levels of drilling efficiency and economy.

F E AT U R E S A N D B E N E F I T S PRODUCT ENHANCEMENTS & UPGRADES

FEATURES BENEFITS PRODUCT ENHANCEMENTS & UPGRADES

DUEL WINCHES Provides redundancy in the event of cable failure. The Hydraulic Ramp pivot eliminates need for a crane
HYDRAULIC RAMP PIVOT to position ramp on drill floor. The system is operated
with wireless remote control.
Seamless rig integration allowing for the catwalk to be
ON-BOARD HPU operated away from the rig to facilitate pad walking
and raising of hydraulic ramp pivot.

The Canrig Pad Walker allows the catwalk to move

PLC CONTROLS Enables multiple safety and control features. PAD WALKER™ KIT around location without the need to use a truck or
loader.

Distances personnel from associated hazards to ensure

WIRELESS REMOTE
safe operation, enabling single person operation. By adding a wheel mobility system, the catwalk can
be connected either directly to the rig or maneuvered
Automatically shuts down catwalk operations using WHEEL MOBILITY SYSTEM around the lease with a front end loader. This reduces
INFRARED SENSING the cost and time involved in a rig move while pad
motion detection sensors when activated by personnel
TECHNOLOGY drilling.
entering restricted area.

Users of the model 3000 catwalk can now take

AUXILIARY WINCH &
advantage of adding an auxiliary winch and light stand
LIGHT STAND KIT
to the rear section of the catwalk.

The kit uses the same reinforced urethane that is used

on the drill floor while racking pipe. It is durable, visible
PIPE PROTECTION KIT and easy to install on existing catwalks. The pads
protect the surface of high-priced chrome pipe normally
used in sour gas areas.
 1704

S A L E S I N F O R M AT I O N
info@canrig.com

RIGLINE 24/7™ SUPPORT

US & Canada: 866 433 4345
International: +1 281 774 5649
support@rigline247.com

C O R P O R AT E H E A D Q U A R T E R S
515 West Greens Road
Houston, TX 77067
USA
Main: +1 281 774 5600

www.canrig.com