Az-103 2 PDF

Microsoft AZ-103 Exam
Exam Microsoft AZ-103 Exam
Title Microsoft Azure Administrator Exam
Version 6.0
Product
247 Q&A with explanations
Type
“Best Material, Great Results”. www.certkingdom.com 1 of 1

Questions & Answers PDF P-2
Product Questions: 247

Version: 6.0
Mix Questions
Question: 1
You have an Azure subscription that contains 10 virtual machines.

You need to ensure that you receive an email message when any virtual machines are powered off,
restarted, or deallocated.
What is the minimum number of rules and action groups that you require?
A. three rules and three action groups

B. one rule and one action group
C. three rules and one action group
D. one rule and three action groups
Answer: C
Explanation:
An action group is a collection of notification preferences defined by the user. Azure Monitor and
Service
Health alerts are configured to use a specific action group when the alert is triggered. Various alerts
may use the same action group or different action groups depending on the user's requirements.
References: https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/monitoring-action-
groups
Question: 2
You have an Azure subscription that contains two resource groups named RG1 and RG2. RG2 does
not contain any resources. RG1 contains the resources in the following table.
https://certkingdom.com
https://www.dumpsschool.com/
Which resource can you move to RG2?
A. W10_OsDisk
B. VNet1
C. VNet3
D. W10
Answer: B
Explanation:
When moving a virtual network, you must also move its dependent resources. For example, you must
move gateways with the virtual network. VM W10, which is in Vnet1, is not a dependent resource.
Incorrect Answers:
A: Managed disks don't support move.
C: Virtual networks (classic) can't be moved.
D: Virtual machines with the managed disks cannot be moved.
References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-move-
resources#virtual-machines-limitations
Question: 3
You have 100 Azure subscriptions. All the subscriptions are associated to the same Azure Active
Directory (Azure AD) tenant named contoso.com.
You are a global administrator.
You plan to create a report that lists all the resources across all the subscriptions.
You need to ensure that you can view all the resources in all the subscriptions.
What should you do?
A. From the Azure portal, modify the profile settings of your account.
B. From Windows PowerShell, run the Add-AzureADAdministrativeUnitMember cmdlet.
C. From Windows PowerShell, run the New-AzureADUserAppRoleAssignment cmdlet.
D. From the Azure portal, modify the properties of the Azure AD tenant.
Answer: C
Explanation:
The New-AzureADUserAppRoleAssignment cmdlet assigns a user to an application role in Azure
Active Directory (AD). Use it for the application report.
References: https://docs.microsoft.com/en-us/powershell/module/azuread/new-
azureaduserapproleassignment?view=azureadps-2.0
Question: 4
Note: This question is part of a series of questions that present the same scenario. Each
question in the series contains a unique solution that might meet the stated goals. Some
question sets might have more than one correct solution, while others might not have a
correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result,
these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group
named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then click Programmatic
deployment.
Does this meet the goal?
A. Yes
B. No
Answer: B
Question: 5
correct solution.
Solution: From the RG1 blade, you click Deployments.
A. Yes
B. No
Answer: A
Question: 6
correct solution.

Solution: From the Subscriptions blade, you select the subscription, and then click Resource
providers.
A. Yes
B. No
Answer: B
Question: 7
DRAG DROP
You have an Azure subscription that contains a storage account.
You have an on-premises server named Server1 that runs Window Server 2016. Server1 has 2 TB of
dat
a.
You need to transfer the data to the storage account by using the Azure Import/Export service.
In which order should you perform the actions? To answer, move all actions from the list of actions to
the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct
orders you select.
Answer:
Question: 8
HOTSPOT
You have an Azure subscription named Subscription1.
In Subscription1, you create an Azure file share named share1.
You create a shared access signature (SAS) named SAS1 as shown in the following exhibit.
To answer, select the appropriate options in the answer are

a.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Box 1: Will be prompted for credentials
Azure Storage Explorer is a standalone app that enables you to easily work with Azure Storage data
on Windows, macOS, and Linux. It is used for connecting to and managing your Azure storage
accounts.
Box 2: Will have read, write, and list access
The net use command is used to connect to file shares.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-dotnet-shared-access-signature-
part-1
https://docs.microsoft.com/en-us/azure/vs-azure-tools-storage-manage-with-storage-
explorer?tabs=windows
Question: 9
You have the Azure virtual machines shown in the following table.
You have a Recovery Services vault that protects VM1 and VM2.
You need to protect VM3 and VM4 by using Recovery Services.
What should you do first?
A. Configure the extensions for VM3 and VM4.

B. Create a new Recovery Services vault.
C. Create a storage account.
D. Create a new backup policy.
Answer: B
Explanation:
A Recovery Services vault is a storage entity in Azure that houses data. The data is typically copies
of data, or configuration information for virtual machines (VMs), workloads, servers, or workstations.
You can use Recovery Services vaults to hold backup data for various Azure services
References: https://docs.microsoft.com/en-us/azure/site-recovery/azure-to-azure-tutorial-enable-
replication
Question: 10
DRAG DROP
You have an on-premises file server named Server1 that runs Windows Server 2016.
You have an Azure subscription that contains an Azure file share.
You deploy an Azure File Sync Storage Sync Service, and you create a sync group.
You need to synchronize files from Server1 to Azure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from
the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Install the Azure File Sync agent on Server1
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced
with an Azure file share
Step 2: Register Server1.
Register Windows Server with Storage Sync Service
Registering your Windows Server with a Storage Sync Service establishes a trust relationship
between your server (or cluster) and the Storage Sync Service.
Step 3: Add a server endpoint
Create a sync group and a cloud endpoint.
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in
sync with each other. A sync group must contain one cloud endpoint, which represents an Azure file
share and one or more server endpoints. A server endpoint represents a path on registered server.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide
Question: 11
You have an Azure subscription that contains the resources in the following table.
Store1 contains a file share named Dat

a. Data contains 5,000 files.
You need to synchronize the files in Data to an on-premises server named Server1.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Download an automation script.
B. Create a container instance.
C. Create a sync group.
D. Register Server1.
E. Install the Azure File Sync agent on Server1.
Answer: CDE
Explanation:
Step 1 (E): Install the Azure File Sync agent on Server1
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced
with an Azure file share
Step 2 (D): Register Server1.
Register Windows Server with Storage Sync Service
between your server (or cluster) and the Storage Sync Service.
Step 3 (C): Create a sync group and a cloud endpoint.
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in
sync with each other. A sync group must contain one cloud endpoint, which represents an Azure file
share and one or more server endpoints. A server endpoint represents a path on registered server.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide
Question: 12
HOTSPOT
You plan to create an Azure Storage account in the Azure region of East US 2.
You need to create a storage account that meets the following requirements:
 Replicates synchronously
 Remains available if a single data center in the region fails
How should you configure the storage account? To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
Box 1: Zone-redundant storage (ZRS)
Zone-redundant storage (ZRS) replicates your data synchronously across three storage clusters in a
single region.
LRS would not remain available if a data center in the region fails
GRS and RA GRS use asynchronous replication.
Box 2: StorageV2 (general purpose V2)
ZRS only support GPv2.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-zrs
Question: 13
You plan to use the Azure Import/Export service to copy files to a storage account.
Which two files should you create before you prepare the drives for the import job? Each correct
answer presents part of the solution.
A. an XML manifest file

B. a driveset CSV file
C. a dataset CSV file
D. a PowerShell PS1 file
E. a JSON configuration file
Answer: BC
Explanation:
B: Modify the driveset.csv file in the root folder where the tool resides.
C: Modify the dataset.csv file in the root folder where the tool resides. Depending on whether you
want to import a file or folder or both, add entries in the dataset.csv file
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-data-to-
files
Question: 14
You have a Recovery Service vault that you use to test backups. The test backups contain two
protected virtual machines.
You need to delete the Recovery Services vault.
A. From the Recovery Service vault, stop the backup of each backup item.
B. From the Recovery Service vault, delete the backup data.
C. Modify the disaster recovery properties of each virtual machine.
D. Modify the locks of each virtual machine.
Answer: A
Explanation:
You can't delete a Recovery Services vault if it is registered to a server and holds backup data. If you
try to delete a vault, but can't, the vault is still configured to receive backup data.
Remove vault dependencies and delete vault
In the vault dashboard menu, scroll down to the Protected Items section, and click Backup Items. In
this menu, you can stop and delete Azure File Servers, SQL Servers in Azure VM, and Azure virtual
machines.
References: https://docs.microsoft.com/en-us/azure/backup/backup-azure-delete-vault
Question: 15
DRAG DROP
You create an Azure Storage account named contosostorage, and then you create a file share named
dat
a.
Which UNC path should you include in a script that references files from the data file share? To
answer, drag the appropriate values to the correct targets. Each value may be used once, more than
once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
Box 1: contosostorage
The name of account
Box 2: file.core.windows.net
Box 3: data
The name of the file share is data.
Example:
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
Question: 16
HOTSPOT
You have an Azure Storage accounts as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the
information presented in the graphic.
Answer:
Explanation:
Box 1: storageaccount1 and storageaccount2 only
Box 2: All the storage accounts
Note: The three different storage account options are: General-purpose v2 (GPv2) accounts,
General-purpose v1 (GPv1) accounts, and Blob storage accounts.
 General-purpose v2 (GPv2) accounts are storage accounts that support all of the latest
features for blobs, files, queues, and tables.
 Blob storage accounts support all the same block blob features as GPv2, but are limited to
supporting only block blobs.
 General-purpose v1 (GPv1) accounts provide access to all Azure Storage services, but may
not have the latest features or the lowest per gigabyte pricing.
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-account-options
Question: 17
You have an Azure subscription that contains 100 virtual machines.
You regularly create and delete virtual machines.

You need to identify unused disks that can be deleted.
What should you do?
A. From Microsoft Azure Storage Explorer, view the Account Management properties.
B. From the Azure portal, configure the Advisor recommendations.
C. From Cloudyn, open the Optimizer tab and create a report.
D. From Cloudyn, create a Cost Management report.
Answer: C
Explanation:
The Unattached Disks report lists storage that is not attached to any active VM. To open the report,
click in the Optimizer tab. Select Inefficiencies and the click Unattached Disks.
Rreferences:
https://social.msdn.microsoft.com/Forums/en-US/0e4b3c28-a7f3-416b-84b7-3753f534e1b9/faq-how-
to-save-money-with-cloudyn-8211-10-steps?forum=Cloudyn
https://docs.microsoft.com/en-us/azure/cost-management/overview
Question: 18
DRAG DROP
You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs
Windows Server 2016 and is part of an availability set.
VM1 has virtual machine-level backup enabled.
VM1 is deleted.
You need to restore VM1 from the backup. VM1 must be part of the availability set.
Answer:
Question: 19
You deploy a Linux virtual machine named VM1 to Subscription1.

You need to monitor the metrics and the logs of VM1.
What should you use?
A. LAD 3.0
B. Azure Analysis Services
C. the AzurePerformanceDiagnostics extension
D. Azure HDInsight
Answer: C
Explanation:
You can use extensions to configure diagnostics on your VMs to collect additional metric data.
The basic host metrics are available, but to see more granular and VM-specific metrics, you need to
install the Azure diagnostics extension on the VM. The Azure diagnostics extension allows additional
monitoring and diagnostics data to be retrieved from the VM.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/tutorial-monitoring
Question: 20
HOTSPOT
You plan to deploy an Ubuntu Server virtual machine named VM1 to Subscription1.
You need to perform a custom deployment of the virtual machine. A specific trusted root certification
authority (CA) must be added during the deployment.
What should you do? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
Box 1: Unattend.xml
In preparation to deploy shielded VMs, you may need to create an operating system specialization
answer file. On Windows, this is commonly known as the "unattend.xml" file. The New-
ShieldingDataAnswerFile Windows PowerShell function helps you do this. Starting with Windows
Server version 1709, you can run certain Linux guest OSes in shielded VMs. If you are using the
System Center Virtual Machine Manager Linux agent to specialize those VMs, the New-
ShieldingDataAnswerFile cmdlet can create compatible answer files for it.
Box 2: The Azure Portal
You can use the Azure portal to deploy a Linux virtual machine (VM) in Azure that runs Ubuntu.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/quick-create-portal
Question: 21
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine
named VM1.
You have a computer named Computer1 that runs Windows 10. Computer1 is connected to the
Internet.
You add a network interface named Interface1 to VM1 as shown in the exhibit (Click the Exhibit
button.)
From Computer1, you attempt to connect to VM1 by using Remote Desktop, but the connection fails.
You need to establish a Remote Desktop connection to VM1.
A. Start VM1.
B. Attach a network interface.
C. Delete the DenyAllOutBound outbound port rule.
D. Delete the DenyAllInBound inbound port rule.
Answer: A
Incorrect Answers:
B: The network interface has already been added to VM.
C: The Outbound rules are fine.
D: The inbound rules are fine. Port 3389 is used for Remote Desktop.
Note: Rules are processed in priority order, with lower numbers processed before higher numbers,
because lower numbers have higher priority. Once traffic matches a rule, processing stops. As a
result, any rules that exist with lower priorities (higher numbers) that have the same attributes as rules
with higher priorities are not processed.
References: https://docs.microsoft.com/en-us/azure/virtual-network/security-overview
Question: 22
You plan to automate the deployment of a virtual machine scale set that uses the Windows Server
2016 Datacenter image.
You need to ensure that when the scale set virtual machines are provisioned, they have web server
components installed.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE Each correct selection is worth one point.
A. Modify the extensionProfile section of the Azure Resource Manager template.

B. Create a new virtual machine scale set in the Azure portal.
C. Create an Azure policy.
D. Create an automation account.
E. Upload a configuration script.
Answer: AB
Explanation:
Virtual Machine Scale Sets can be used with the Azure Desired State Configuration (DSC) extension
handler. Virtual machine scale sets provide a way to deploy and manage large numbers of virtual
machines, and can elastically scale in and out in response to load. DSC is used to configure the VMs
as they come online so they are running the production software.
References: https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-
sets-dsc
Question: 23
You have an Azure subscription that contains a virtual machine named VM1. VM1 hosts a line-of-
business application that is available 24 hours a day. VM1 has one network interface and one
managed disk. VM1 uses the D4s v3 size.
You plan to make the following changes to VM1:
 Change the size to D8s v3.
 Add a 500-GB managed disk.
 Add the Puppet Agent extension.
 Attach an additional network interface.
Which change will cause downtime for VM1?
A. Add a 500-GB managed disk.

B. Attach an additional network interface.
C. Add the Puppet Agent extension.
D. Change the size to D8s v3.
Answer: D
Explanation:
While resizing the VM it must be in a stopped state.
References: https://azure.microsoft.com/en-us/blog/resize-virtual-machines/
Question: 24
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains two Azure virtual
machines named VM1 and VM2. VM1 and VM2 run Windows Server 2016.
VM1 is backed up daily by Azure Backup without using the Azure Backup agent.
VM1 is affected by ransomware that encrypts dat
a.
You need to restore the latest backup of VM1.
To which location can you restore the backup? To answer, select the appropriate options in the
answer area.
Answer:
Explanation:
Box 1: VM1 only
To restore files or folders from the recovery point, go to the virtual machine and choose the desired
recovery point.
Box 2: A new Azure virtual machine only
On the Restore configuration blade, you have two choices:
 Create virtual machine
 Restore disks
References:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-files-from-vm
https://docs.microsoft.com/en-us/azure/backup/backup-azure-arm-restore-vms
Question: 25
HOTSPOT
You purchase a new Azure subscription named Subscription1.
You create a virtual machine named VM1 in Subscription1. VM1 is not protected by Azure Backup.
You need to protect VM1 by using Azure Backup. Backups must be created at 01:00 and stored for
30 days.
a.
Answer:
Explanation:
Box 1: A Recovery Services vault
A Recovery Services vault is an entity that stores all the backups and recovery points you create over
time.
Box 2: A backup policy
What happens when I change my backup policy?
When a new policy is applied, schedule and retention of the new policy is followed.
References:
https://docs.microsoft.com/en-us/azure/backup/backup-configure-vault
https://docs.microsoft.com/en-us/azure/backup/backup-azure-backup-faq
Question: 26
DRAG DROP
You have an availability set named AS1 that contains three virtual machines named VM1, VM2, and
VM3.
You attempt to reconfigure VM1 to use a larger size. The operation fails and you receive an allocation
failure message.
You need to ensure that the resize operation succeeds.
Answer:
Question: 27
Note: This question is part of a series of questions that present the same scenario. Each question in the
series contains a unique solution that might meet the stated goals. Some question sets might have more
than one correct solution, while others might not have a correct solution.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure
Resource Manager template named ARM1.json.
You receive a notification that VM1 will be affected by maintenance.
You need to move VM1 to a different host immediately.
Solution: From the Redeploy blade, you click Redeploy.
A. Yes
B. No
Answer: A
Explanation:
When you redeploy a VM, it moves the VM to a new node within the Azure infrastructure and then
powers it back on, retaining all your configuration options and associated resources.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node
Question: 28
correct solution.
Solution: From the Overview blade, you move the virtual machine to a different resource group.
A. Yes
B. No
Answer: B
Explanation:
You should redeploy the VM.
Question: 29
DRAG DROP
You have an Azure subscription. The subscription includes a virtual network named VNet1. Currently,
VNet1 does not contain any subnets.
You plan to create subnets on VNet1 and to use application security groups to restrict the traffic
between the subnets. You need to create the application security groups and to assign them to the
subnets.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the
list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: New-AzureRmNetworkSecurityRuleConfig
Step 2: New-AzureRmNetworkSecurityGroup
Step 3: New-AzureRmVirtualNetworkSubnetConfig
Step 4: New-AzureRmVirtualNetwork
Example: Create a virtual network with a subnet referencing a network security group
New-AzureRmResourceGroup -Name TestResourceGroup -Location centralus
$rdpRule = New-AzureRmNetworkSecurityRuleConfig -Name rdp-rule -Description "Allow RDP" -
Access Allow -Protocol Tcp -Direction Inbound -Priority 100 -SourceAddressPrefix Internet -
SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 3389
$networkSecurityGroup = New-AzureRmNetworkSecurityGroup -ResourceGroupName
TestResourceGroup -Location centralus -Name "NSG-FrontEnd" -SecurityRules $rdpRule
$frontendSubnet = New-AzureRmVirtualNetworkSubnetConfig -Name frontendSubnet -
AddressPrefix "10.0.1.0/24" -NetworkSecurityGroup $networkSecurityGroup
$backendSubnet = New-AzureRmVirtualNetworkSubnetConfig -Name backendSubnet -
AddressPrefix "10.0.2.0/24" -NetworkSecurityGroup $networkSecurityGroup
New-AzureRmVirtualNetwork -Name MyVirtualNetwork -ResourceGroupName TestResourceGroup -
Location centralus -AddressPrefix "10.0.0.0/16" -Subnet $frontendSubnet,$backendSubnet
References: https://docs.microsoft.com/en-us/powershell/module/azurerm.network/new-
azurermvirtualnetwork?view=azurermps-6.7.0
Question: 30
Subnet1 is associated to VNet1. NIC1 attaches VM1 to Subnet1.

You need to apply ASG1 to VM1.
What should you do?
A. Modify the properties of NSG1.

B. Modify the properties of ASG1.
C. Associate NIC1 to ASG1.
Answer: B
Explanation:
When you deploy VMs, make them members of the appropriate ASGs.
You associate the ASG with a subnet.
References: https://azure.microsoft.com/en-us/blog/applicationsecuritygroups/
Question: 31
HOTSPOT
Subscription1 contains the virtual machines in the following table.
Subscription1 contains a virtual network named VNet1 that has the subnets in the following table.
VM3 has a network adapter named NIC3. IP forwarding is enabled on NIC3. Routing is enabled on
VM3.
You create a route table named RT1. RT1 is associated to Subnet1 and Subnet2 and contains the
routes in the following table.
You apply RT1 to Subnet1.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Box 1: Yes
Traffic from VM1 and VM2 can reach VM3 thanks to the routing table, and as IP forwarding is
enabled on VM3, traffic from VM3 can reach VM1.
Box 2: No
VM3, which has IP forwarding, must be turned on, in order for traffic from VM2 to reach VM1.
Box 3: Yes
The traffic from VM1 will reach VM3, which thanks to IP forwarding, will send the traffic to VM2.
References: https://www.quor
a.com/What-is-IP-forwarding
Question: 32
HOTSPOT
You plan to deploy five virtual machines to a virtual network subnet.

Each virtual machine will have a public IP address and a private IP address.
Each virtual machine requires the same inbound and outbound security rules.
What is the minimum number of network interfaces and network security groups that you require? To
answer, select the appropriate options in the answer area.
Answer:
Explanation:
Box 1: 10
One public and one private network interface for each of the five VMs.
Box 2: 1
You can associate zero, or one, network security group to each virtual network subnet and network
interface in a virtual machine. The same network security group can be associated to as many
subnets and network interfaces as you choose.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview
Question: 33
You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated
to a different Azure AD tenant.
Subscription1 contains a virtual network named VNet1.VNet1 contains an Azure virtual machine
named VM1 and has an IP address space of 10.0.0.0/16.
Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine
named VM2 and has an IP address space of 10.10.0.0/24.
You need to connect VNet1 to VNet2.
A. Move VNet1 to Subscription2.

B. Modify the IP address space of VNet2.
C. Provision virtual network gateways.
D. Move VM1 to Subscription2.
Answer: C
Explanation:
The virtual networks can be in the same or different regions, and from the same or different
subscriptions. When connecting VNets from different subscriptions, the subscriptions do not need to
be associated with the same Active Directory tenant.
Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual
network to another virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to
creating a Site-to-Site IPsec connection to an on-premises location. Both connectivity types use a
VPN gateway to provide a secure tunnel using IPsec/IKE, and both function the same way when
communicating.
The local network gateway for each VNet treats the other VNet as a local site. This lets you specify
additional address space for the local network gateway in order to route traffic.
References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet-
resource-manager-portal
Question: 34
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains the resources in the
following table.
In Azure, you create a private DNS zone named adatum.com. You set the registration virtual network
to VNet2. The adatum.com zone is configured as shown in the following exhibit.
Answer:
Explanation:
Box 1: No
Azure DNS provides automatic registration of virtual machines from a single virtual network that's
linked to a private zone as a registration virtual network. VM5 does not belong to the registration
virtual network though.
Box 2: No
Forward DNS resolution is supported across virtual networks that are linked to the private zone as
resolution virtual networks. VM5 does belong to a resolution virtual network.
Box 3: Yes
VM6 belongs to registration virtual network, and an A (Host) record exists for VM9 in the DNS zone.
By default, registration virtual networks also act as resolution virtual networks, in the sense that DNS
resolution against the zone works from any of the virtual machines within the registration virtual
network.
References: https://docs.microsoft.com/en-us/azure/dns/private-dns-overview
Question: 35
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine
named VM1.
You install and configure a web server and a DNS server on VM1.
VM1 has the effective network security rules shown in the following exhibit.
Answer:
Question: 36
Your company has an Azure subscription named Subscription1.
The company also has two on-premises servers named Server1 and Server2 that run Windows
Server 2016. Server1 is configured as a DNS server that has a primary DNS zone named
adatum.com. Adatum.com contains 1,000 DNS records.
You manage Server1 and Subscription1 from Server2. Server2 has the following tools installed:
 The DNS Manager console
 Azure PowerShell
 Azure CLI 2.0
You need to move the adatum.com zone to Subscription1. The solution must minimize administrative
effort.
A. Azure PowerShell
B. Azure CLI
C. the Azure portal
D. the DNS Manager console
Answer: B
Explanation:
Azure DNS supports importing and exporting zone files by using the Azure command-line interface
(CLI). Zone file import is not currently supported via Azure PowerShell or the Azure portal.
References: https://docs.microsoft.com/en-us/azure/dns/dns-import-export
Question: 37
VM1 and VM2 are deployed from the same template and host line-of-business applications accessed
by using Remote Desktop. You configure the network security group (NSG) shown in the exhibit.
(Click the Exhibit button.)
You need to prevent users of VM1 and VM2 from accessing websites on the Internet.
What should you do?
A. Associate the NSG to Subnet1.

B. Disassociate the NSG from a network interface.
C. Change the DenyWebSites outbound security rule.
D. Change the Port_80 inbound security rule.
Answer: A
Explanation:
You can associate or dissociate a network security group from a network interface or subnet.
The NSG has the appropriate rule to block users from accessing the Internet. We just need to
associate it with Subnet1.
References: https://docs.microsoft.com/en-us/azure/virtual-network/manage-network-security-group
Question: 38
HOTSPOT
You have peering configured as shown in the following exhibit.
Answer:
Explanation:
Box 1: vNET6 only

Box 2: Modify the address space
The virtual networks you peer must have non-overlapping IP address spaces.
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-
peering#requirements-and-constraints
Question: 39
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains the virtual networks in
the following table.
Subscription1 contains the virtual machines in the following table:
The firewalls on all the virtual machines are configured to allow all ICMP traffic.
You add the peerings in the following table.
For each of the following statements, select Yest if the statement is true. Otherwise, select No.
Answer:
Explanation:
Box 1: Yes
Vnet1 and Vnet3 are peers.
Box 2: Yes
Vnet2 and Vnet3 are peers.
Box 3: No
Peering connections are non-transitive.
References: https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-
networking/hub-spoke
Question: 40
To which subnets can you apply NSG1?
A. the subnets on VNet2 only

B. the subnets on VNet1 only
C. the subnets on VNet2 and VNet3 only
D. the subnets on VNet1, VNet2, and VNet3
E. the subnets on VNet3 only
Answer: E
Explanation:
All Azure resources are created in an Azure region and subscription. A resource can only be created
in a virtual network that exists in the same region and subscription as the resource.
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-vnet-plan-design-
arm
Question: 41
You create an Azure Storage account named contosostorage.
You plan to create a file share named dat

a.
Users need to map a drive to the data file share from home computers that run Windows 10.
Which port should be open between the home computers and the data file share?
A. 80
B. 443
C. 445
D. 3389
Answer: C
Explanation:
Ensure port 445 is open: The SMB protocol requires TCP port 445 to be open; connections will fail if
port 445 is blocked.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
Question: 42
You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com.
Your company has a public DNS zone for contoso.com.
You add contoso.com as a custom domain name to Azure AD.
You need to ensure that Azure can verify the domain name.
Which type of DNS record should you create?
A. RRSIG
B. PTR
C. DNSKEY
D. TXT
Answer: D
Explanation:
Create the TXT record. App Services uses this record only at configuration time to verify that you own
the custom domain. You can delete this TXT record after your custom domain is validated and
configured in App Service.
References: https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain
Question: 43
DRAG DROP
You have an Azure Active Directory (Azure AD) tenant that has the initial domain name.
You have a domain name of contoso.com registered at a third-party registrar.
You need to ensure that you can create Azure AD users that have names containing a suffix of
@contoso.com.
Which three actions should you perform in sequence? To answer, move the appropriate cmdlets from
the list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation:
The process is simple:
1. Add the custom domain name to your directory
2. Add a DNS entry for the domain name at the domain name registrar
3. Verify the custom domain name in Azure AD
References: https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain
Question: 44
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains the resources in the
following table.
VNet1 is in RG1. VNet2 is in RG2. There is no connectivity between VNet1 and Vnet2.
An administrator named Admin1 creates an Azure virtual machine named VM1 in RG1. VM1 uses a
disk named Disk1 and connects to VNet1. Admin1 then installs a custom application in VM1.
You need to move the custom application to Vnet2. The solution must minimize administrative effort.
Which two actions should you perform? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
You can move a VM and its associated resources to another resource group using the portal.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/move-vm
Question: 45
correct solution.

You have an Azure subscription that contains 10 virtual networks. The virtual networks are hosted in
separate resource groups.
Another administrator plans to create several network security groups (NSGs) in the subscription.
You need to ensure that when an NSG is created, it automatically blocks TCP port 8080 between the
virtual networks.
Solution: From the Resource providers blade, you unregister the Microsoft.ClassicNetwork provider.
A. Yes
B. No
Answer: B
Question: 46
correct solution.
virtual networks.
Solution: You configure a custom policy definition, and then you assign the policy to the subscription.
A. Yes
B. No
Answer: A
Explanation:
Resource policy definition used by Azure Policy enables you to establish conventions for resources in
your organization by describing when the policy is enforced and what effect to take. By defining
conventions, you can control costs and more easily manage your resources.
References: https://docs.microsoft.com/en-us/azure/azure-policy/policy-definition
Question: 47
correct solution.

virtual networks.
Solution: You create a resource lock, and then you assign the lock to the subscription.
A. Yes
B. No
Answer: B
Explanation:
How can I freeze or lock my production/critical Azure resources from accidental deletion? There is
way to do this with both ASM and ARM resources using Azure resource lock.
References: https://blogs.msdn.microsoft.com/azureedu/2016/04/27/using-azure-resource-manager-
policy-and-azure-lock-to-control-your-azure-resources/
Question: 48
You have an Azure Active Directory (Azure AD) domain that contains 5,000 user accounts. You
create a new user account named AdminUser1.
You need to assign the User administrator administrative role to AdminUser1.
What should you do from the user account properties?
A. From the Directory role blade, modify the directory role.

B. From the Groups blade, invite the user account to a new group.
C. From the Licenses blade, assign a new license.
Answer: A
Explanation:
Assign a role to a user
1. Sign in to the Azure portal with an account that's a global admin or privileged role admin for the
directory.
2. Select Azure Active Directory, select Users, and then select a specific user from the list.
3. For the selected user, select Directory role, select Add role, and then pick the appropriate admin
roles from the Directory roles list, such as Conditional access administrator.
4. Press Select to save.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/active-directory-
users-assign-role-azure-portal
Question: 49
HOTSPOT
You have an Azure Active Directory (Azure AD) tenant named adatum.com. Adatum.com contains the
groups in the following table.
You create two user accounts that are configured as shown in the following table.
To which groups do User1 and User2 belong? To answer. select the appropriate options in the answer
are
a.
Answer:
Explanation:
Box 1: Group 1 only
First rule applies
Box 2: Group1 and Group2 only
Both membership rules apply.
References: https://docs.microsoft.com/en-us/sccm/core/clients/manage/collections/create-collections
Question: 50
You have an Active Directory forest named contoso.com.

You install and configure Azure AD Connect to use password hash synchronization as the single sign-
on (SSO) method. Staging mode is enabled.
You review the synchronization results and discover that the Synchronization Service Manager does
not display any sync jobs.
You need to ensure that the synchronization completes successfully.
What should you do?
A. From Synchronization Service Manager, run a full import.

B. Run Azure AD Connect and set the SSO method to Pass-through Authentication.
C. From Azure PowerShell, run Start-AdSyncSyncCycle -PolicyType Initial.
D. Run Azure AD Connect and disable staging mode.
Answer: D
Explanation:
Staging mode must be disabled. If the Azure AD Connect server is in staging mode, password hash
synchronization is temporarily disabled.
References: https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-
aadconnectsync-troubleshoot-password-hash-synchronization#no-passwords-are-synchronized-
troubleshoot-by-using-the-troubleshooting-task
Question: 51
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com that contains
100 user accounts.
You purchase 10 Azure AD Premium P2 licenses for the tenant.
You need to ensure that 10 users can use all the Azure AD Premium features.
What should you do?
A. From the Groups blade of each user, invite the users to a group.
B. From the Licenses blade of Azure AD, assign a license.
C. From the Directory role blade of each user, modify the directory role.
D. From the Azure AD domain, add an enterprise application.
Answer: B
Explanation:
To assign a license, under Azure Active Directory > Licenses > All Products, select one or more
products, and then select Assign on the command bar.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/license-users-
groups
Question: 52
HOTSPOT
Your network contains an Active Directory domain named adatum.com and an Azure Active Directory
(Azure AD) tenant named adatum.onmicrosoft.com.
Adatum.com contains the user accounts in the following table.
Adatum.onmicrosoft.com contains the user accounts in the following table.
You need to implement Azure AD Connect. The solution must follow the principle of least privilege.
Which user accounts should you use? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
Box 1: User5
In Express settings, the installation wizard asks for the following:
AD DS Enterprise Administrator credentials
Azure AD Global Administrator credentials
The AD DS Enterprise Admin account is used to configure your on-premises Active Directory. These
credentials are only used during the installation and are not used after the installation has completed.
The Enterprise Admin, not the Domain Admin should make sure the permissions in Active Directory
can be set in all domains.
Box 2: UserA
Azure AD Global Admin credentials credentials are only used during the installation and are not used
after the installation has completed. It is used to create the Azure AD Connector account used for
synchronizing changes to Azure AD. The account also enables sync as a feature in Azure AD.
aadconnect-accounts-permissions
Question: 53
You download an Azure Resource Manager template based on an existing virtual machine. The
template will be used to deploy 100 virtual machines.
You need to modify the template to reference an administrative password. You must prevent the
password from being stored in plain text.
What should you create to store the password?
A. Azure Active Directory (AD) Identity Protection and an Azure policy

B. a Recovery Services vault and a backup policy
C. an Azure Key Vault and an access policy
D. an Azure Storage account and an access policy
Answer: C
Explanation:
You can use a template that allows you to deploy a simple Windows VM by retrieving the password
that is stored in a Key Vault. Therefore the password is never put in plain text in the template
parameter file.
References: https://azure.microsoft.com/en-us/resources/templates/101-vm-secure-password/
Question: 54
Your company registers a domain name of contoso.com.

You create an Azure DNS named contoso.com and then you add an A record to the zone for a host
named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP
address.
You need to resolve the name resolution issue.
Solution: You modify the name server at the domain registrar.
A. Yes
B. No
Answer: B
Explanation:
Modify the Name Server (NS) record.
References: https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns
Question: 55

address.
Solution: You add an NS record to the contoso.com zone.
A. Yes
B. No
Answer: A
Explanation:
Before you can delegate your DNS zone to Azure DNS, you need to know the name servers for your
zone. The NS record set contains the names of the Azure DNS name servers assigned to the zone.
Question: 56

address.
Solution: You modify the SOA record in the contoso.com zone
A. Yes
B. No
Answer: B
Explanation:
Modify the NS record, not the SOA record.
Note: The SOA record stores information about the name of the server that supplied the data for the
zone; the administrator of the zone; the current version of the data file; the number of seconds a
secondary name server should wait before checking for updates; the number of seconds a secondary
name server should wait before retrying a failed zone transfer; the maximum number of seconds that
a secondary name server can use data before it must either be refreshed or expire; and a default
number of seconds for the time-to-live file on resource records.
References: https://searchnetworking.techtarget.com/definition/start-of-authority-record
Question: 57
correct solution.
Solution: From the RG1 blade, you click Automation script.
A. Yes
B. No
Answer: B
Question: 58
correct solution.
Solution: Solution: From the Overview blade, you move the virtual machine to a different subscription.
A. Yes
B. No
Answer: B
Explanation:
You would need to Redeploy the VM.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node
Question: 59
correct solution.

Solution: From the Update management blade, you click enable.
A. Yes
B. No
Answer: B
Explanation:
You would need to Redeploy the VM.
Question: 60
HOTSPOT
You have an Azure subscription.
You need to implement a custom policy that meet the following requirements:
*Ensures that each new resource group in the subscription has a tag named organization set to a
value of Contoso.
*Ensures that resource group can be created from the Azure portal.
*Ensures that compliance reports in the Azure portal are accurate.
How should you complete the policy? To answer, select the appropriate options in the answers are
a.
Answer:
References: https://docs.microsoft.com/en-us/azure/governance/policy/concepts/definition-structure
Question: 61
You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com.
Your company has a public DNS zone for contoso.com.
You add contoso.com as a custom domain name to Azure AD.
You need to ensure that Azure can verify the domain name.
Which type of DNS record should you create?
A. PTR
B. MX
C. NSEC3
D. RRSIG
Answer: B
Question: 62
You have an Azure subscription named Subscription1 that is used be several departments at your
company. Subscription1 contains the resources in the following table:
Another administrator deploys a virtual machine named VM1 and an Azure Storage account named
Storage2 by using a single Azure Resource Manager template.
You need to view the template used for the deployment.
From which blade can you view the template that was used for the deployment?
A. RG1
B. VM1
C. Storage1
D. Container1
Answer: A
Explanation:
1. View template from deployment history
Go to the resource group for your new resource group. Notice that the portal shows the result of the
last deployment. Select this link.
2. You see a history of deployments for the group. In your case, the portal probably lists only one
deployment. Select this deployment.
The portal displays a summary of the deployment. The summary includes the status of the
deployment and its operations and the values that you provided for parameters. To see the template
that you used for the deployment, select View template.
References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-manager-
export-template
Question: 63
DRAG DROP
You have two Azure virtual machines named VM1 and VM2. VM1 has a single data disk named
Disk1. You need to attach Disk1 to VM2. The solution must minimize downtime for both virtual
machines.
Which four actions should you perform in sequence? To answer, move the appropriate actions from
Answer:
Explanation:
Step 1: Stop VM1.
Step 2: Detach Disk1 from VM1.
Step 3: Start VM1.
Detach a data disk using the portal
1. In the left menu, select Virtual Machines.
2. Select the virtual machine that has the data disk you want to detach and click Stop to deallocate
the VM.
3. In the virtual machine pane, select Disks.
4. At the top of the Disks pane, select Edit.
5. In the Disks pane, to the far right of the data disk that you would like to detach, click the Detach
button image detach button.
6. After the disk has been removed, click Save on the top of the pane.
7. In the virtual machine pane, click Overview and then click the Start button at the top of the pane to
restart the VM.
8. The disk stays in storage but is no longer attached to a virtual machine.

Step 4: Attach Disk1 to VM2
Attach an existing disk
Follow these steps to reattach an existing available data disk to a running VM.
9. Select a running VM for which you want to reattach a data disk.
10. From the menu on the left, select Disks.
11. Select Attach existing to attach an available data disk to the VM.
12. From the Attach existing disk pane, select OK.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/detach-disk
https://docs.microsoft.com/en-us/azure/lab-services/devtest-lab-attach-detach-data-disk
Question: 64
You plan to use Azure Resource Manager templates to deploy 50 Azure virtual machines that will be
part of the same availability set.
You need to ensure that as many virtual machines as possible are available if the fabric fails or during
servicing.
How should you configure the template? To answer, select the appropriate options in the answer are
a.
Select two alternatives below.
A. platformFaultDomainCount: 0
B. platformFaultDomainCount: 1
C. platformFaultDomainCount: 2
D. platformFaultDomainCount: 3
E. platformFaultDomainCount: 4
F. platformUpdateDomainCount: 10
G. platformUpdateDomainCount: 20
H. platformUpdateDomainCount: 25
I. platformUpdateDomainCount: 30
J. platformUpdateDomainCount: 40
K. platformUpdateDomainCount: 50
Answer: CG
Explanation:
Use two fault domains.
2 or 3 is max, depending on which region you are in.
Use 20 for platformUpdateDomainCount
Increasing the update domain (platformUpdateDomainCount) helps with capacity and availability
planning when the platform reboots nodes. A higher number for the pool (20 is max) means that
fewer of their nodes in any given availability set would be rebooted at once.
References:
https://www.itprotoday.com/microsoft-azure/check-if-azure-region-supports-2-or-3-fault-domains-
managed-disks
https://github.com/Azure/acs-engine/issues/1030
Question: 65
You have an Azure subscription named Subscription1. Subscription1 contains the resource groups in
the following table.
RG1 has a web app named WebApp1. WebApp1 is located in West Europe.
You move WebApp1 to RG2. What is the effect of the move?
A. The App Service plan to WebApp1 moves to North Europe. Policy2 applies to WebApp1.
B. The App Service plan to WebApp1 moves to North Europe. Policy1 applies to WebApp1.
C. The App Service plan to WebApp1 remains to West Europe. Policy2 applies to WebApp1.
D. The App Service plan to WebApp1 remains to West Europe. Policy1 applies to WebApp1.
Answer: C
Explanation:
You can move an app to another App Service plan, as long as the source plan and the target plan are
in the same resource group and geographical region.
The region in which your app runs is the region of the App Service plan it's in. However, you cannot
change an App Service plan's region.
References: https://docs.microsoft.com/en-us/azure/app-service/app-service-plan-manage
Question: 66
DRAG DROP
You have an Azure subscription that is used by four departments in your company. The subscription
contains 10 resource groups. Each department uses resources in several resource groups.
You need to send a report to the finance department. The report must detail the costs for each
department. Which three actions should you perform in sequence? To answer, move the appropriate
actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Box 1: Assign a tag to each resource.
You apply tags to your Azure resources giving metadata to logically organize them into a taxonomy.
After you apply tags, you can retrieve all the resources in your subscription with that tag name and
value. Each resource or resource group can have a maximum of 15 tag name/value pairs. Tags
applied to the resource group are not inherited by the resources in that resource group.
Box 2: From the Cost analysis blade, filter the view by tag
After you get your services running, regularly check how much they're costing you. You can see the
current spend and burn rate in Azure portal.
1. Visit the Subscriptions blade in Azure portal and select a subscription.

2. You should see the cost breakdown and burn rate in the popup blade.
3. Click Cost analysis in the list to the left to see the cost breakdown by resource. Wait 24 hours after
you add a service for the data to populate.
4. You can filter by different properties like tags, resource group, and timespan. Click Apply to
confirm the filters and Download if you want to export the view to a Comma-Separated Values
(.csv) file.
Box 3: Download the usage report
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags
https://docs.microsoft.com/en-us/azure/billing/billing-getting-started
Question: 67
You have a resource group named RG1. RG1 contains an Azure Storage account named
storageaccount1 and a virtual machine named VM1 that runs Windows Server 2016.
Storageaccount1 contains the disk files for VM1. You apply a ReadOnly lock to RG1.
What can you do from the Azure portal?
A. Generate an automation script for RG1.

B. View the keys of storageaccount1.
C. Upload a blob to storageaccount1.
D. Start VM1.
Answer: B
Explanation:
ReadOnly means authorized users can read a resource, but they can't delete or update the resource.
Applying this lock is similar to restricting all authorized users to the permissions granted by the
Reader role.
References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lock-
resources
Question: 68
You configure Azure AD Connect for Azure Active Directory Seamless Single Sign-On (Azure AD
Seamless SSO) for an on-premises network. Users report that when they attempt to access
myapps.microsoft.com, they are prompted multiple times to sign in and are forced to use an account
name that ends with onmicrosoft.com.
You discover that there is a UPN mismatch between Azure AD and the on-premises Active Directory.
You need to ensure that the users can use single-sign on (SSO) to access Azure resources.
A. From the on-premises network, deploy Active Directory Federation Services (AD FS).
B. From Azure AD, add and verify a custom domain name.
C. From the on-premises network, request a new certificate that contains the Active Directory domain
name.
D. From the server that runs Azure AD Connect, modify the filtering options.
Answer: B
Explanation:
Azure AD Connect lists the UPN suffixes that are defined for the domains and tries to match them
with a
custom domain in Azure AD. Then it helps you with the appropriate action that needs to be taken. The
Azure
AD sign-in page lists the UPN suffixes that are defined for on-premises Active Directory and displays
the
corresponding status against each suffix. The status values can be one of the following:
State: Verified
Azure AD Connect found a matching verified domain in Azure AD. All users for this domain can sign
in by
using their on-premises credentials.
State: Not verified
Azure AD Connect found a matching custom domain in Azure AD, but it isn't verified. The UPN suffix
of the
users of this domain will be changed to the default .onmicrosoft.com suffix after synchronization if the
domain isn't verified.
Action Required: Verify the custom domain in Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/hybrid/plan-connect-user-signin
Question: 69
You have two Azure Active Directory (Azure AD) tenants named contoso.com and fabrikam.com.
You have a Microsoft account that you use to sign in to both tenants.
You need to configure the default sign-in tenant for the Azure portal.
What should you do?
A. From the Azure portal, configure the portal settings.

B. From the Azure portal, change the directory.
C. From Azure Cloud Shell, run Set-AzureRmContext.
D. From Azure Cloud Shell, run Set-AzureRmSubscription.
Answer: B
Explanation:
Change the subscription directory in the Azure portal.
The classic portal feature Edit Directory, that allows you to associate an existing subscription to your
Azure Active Directory (AAD), is now available in Azure portal. It used to be available only to Service
Admins with Microsoft accounts, but now it's available to users with AAD accounts as well.
To get started:
1. Go to Subscriptions.
2. Select a subscription.
3. Select Change directory.
Incorrect Answers:
C: The Set-AzureRmContext cmdlet sets authentication information for cmdlets that you run in the
current session. The context includes tenant, subscription, and environment information.
References: https://azure.microsoft.com/en-us/updates/edit-directory-now-in-new-portal/
Question: 70
You sign up for Azure Active Directory (Azure AD) Premium.

You need to add a user named admin1@contoso.com as an administrator on all the computers that
will be joined to the Azure AD domain.
What should you configure in Azure AD?
A. Device settings from the Devices blade.

B. General settings from the Groups blade.
C. User settings from the Users blade.
D. Providers from the MFA Server blade.
Answer: C
When you connect a Windows device with Azure AD using an Azure AD join, Azure AD adds the
following
security principles to the local administrators group on the device:
The Azure AD global administrator role
The Azure AD device administrator role
The user performing the Azure AD join
In the Azure portal, you can manage the device administrator role on the Devices page. To open the
Devices
page:
1. Sign in to your Azure portal as a global administrator or device administrator.
2. On the left navbar, click Azure Active Directory.
3. In the Manage section, click Devices.
4. On the Devices page, click Device settings.
5. To modify the device administrator role, configure Additional local administrators on Azure AD
joined
devices.
References: https://docs.microsoft.com/en-us/azure/active-directory/devices/assign-local-admin
Question: 71
correct solution.
You create an Azure DNS zone named contoso.com, and then you add an A record to the zone for a
host named www that has an IP address of 131.107.1.10.
address.
Solution: You create a PTR record for www in the contoso.com zone.
A. Yes
B. No
Answer: B
Explanation:
Modify the Name Server (NS) record.
Question: 72
correct solution.
virtual networks.
Solution: You assign a built-in policy definition to the subscription.
A. Yes
B. No
Answer: B
Question: 73
HOTSPOT
You have a virtual network named VNet1 that has the configuration shown in the following exhibit.

Answer:
Explanation:
Box 1: add a subnet
Your IaaS virtual machines (VMs) and PaaS role instances in a virtual network automatically receive a
private IP address from a range that you specify, based on the subnet they are connected to. We
need to add the 192.168.1.0/24 subnet.
Box 2: add a network interface
The 10.2.1.0/24 network exists. We need to add a network interface.
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-static-private-ip-
arm-pportal
Question: 74
You have an Azure DNS zone named adatum.com. You need to delegate a subdomain named
research.adatum.com to a different DNS server in Azure. What should you do?
A. Create an PTR record named research in the adatum.com zone.

B. Create an NS record named research in the adatum.com zone.
C. Modify the SOA record of adatum.com.
D. Create an A record named “.research in the adatum.com zone.
Answer: D
Explanation:
Configure A records for the domains and sub domains.
References: http://www.stefanjohansson.org/2012/12/how-to-configure-custom-dns-names-for-
multiple-subdomain-based-azure-web-sites/
Question: 75
HOTSPOT
You have an Azure subscription named Subscrption1 that is associated to an Azure Active Directory
(Azure AD) tenant named AAD1.
Subscription1 contains the objects in the following table:
You plan to create a single backup policy for Vault1. To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
Box 1: RG1 only
Box 2: 99 years
With the latest update to Azure Backup, customers can retain their data for up to 99 years in Azure.
Note: A backup policy defines a matrix of when the data snapshots are taken, and how long those
snapshots are retained.
The backup policy interface looks like this:
References: https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-
arm#defining-a-backup-policy
https://blogs.microsoft.com/firehose/2015/02/16/february-update-to-azure-backup-includes-data-
retention-up-to-99-years-offline-backup-and-more/
Question: 76
DRAG DROP
You have an Azure Linux virtual machine that is protected by Azure Backup.
One week ago, two files were deleted from the virtual machine.
You need to restore the deleted files to an on-premises computer as quickly as possible.
Answer:
Explanation:
To restore files or folders from the recovery point, go to the virtual machine and choose the desired
recovery point.
Step 0. In the virtual machine's menu, click Backup to open the Backup dashboard.
Step 1. In the Backup dashboard menu, click File Recovery.
Step 2. From the Select recovery point drop-down menu, select the recovery point that holds the files
you want. By default, the latest recovery point is already selected.
Step 3: To download the software used to copy files from the recovery point, click Download
Executable (for Windows Azure VM) or Download Script (for Linux Azure VM, a python script is
generated).
Step 4: Copy the files by using AzCopy
AzCopy is a command-line utility designed for copying data to/from Microsoft Azure Blob, File, and
Table storage, using simple commands designed for optimal performance. You can copy data
between a file system and a storage account, or between storage accounts.
References:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-files-from-vm
https://docs.microsoft.com/en-us/azure/storage/common/storage-use-azcopy
Question: 77
You have an Azure subscription that contains a storage account named account1.
You plan to upload the disk files of a virtual machine to account1 from your on-premises network. The
on-premises network uses a public IP address space of 131.107.1.0/24.
You plan to use the disk files to provision an Azure virtual machine named VM1. VM1 will be attached
to a virtual network named VNet1. VNet1 uses an IP address space of 192.168.0.0/24.
You need to configure account1 to meet the following requirements:
 Ensure that you can upload the disk files to account1.
 Ensure that you can attach the disks to VM1.
 Prevent all other access to account1.
Which two actions should you perform? Each correct selection presents part of the solution.
A. From the Firewalls and virtual networks blade of account1, add the 131.107.1.0/24 IP address
range.
B. From the Firewalls and virtual networks blade of account1, select Selected networks.
C. From the Firewalls and virtual networks blade of acount1, add VNet1.
D. From the Firewalls and virtual networks blade of account1, select Allow trusted Microsoft
services to
access this storage account.
E. From the Service endpoints blade of VNet1, add a service endpoint.
Answer: BE
Explanation:
B: By default, storage accounts accept connections from clients on any network. To limit access to
selected networks, you must first change the default action.
Azure portal
1. Navigate to the storage account you want to secure.
2. Click on the settings menu called Firewalls and virtual networks.
3. To deny access by default, choose to allow access from 'Selected networks'. To allow traffic from
all networks, choose to allow access from 'All networks'.
4. Click Save to apply your changes.
E: Grant access from a Virtual Network
Storage accounts can be configured to allow access only from specific Azure Virtual Networks.
By enabling a Service Endpoint for Azure Storage within the Virtual Network, traffic is ensured an
optimal route to the Azure Storage service. The identities of the virtual network and the subnet are
also transmitted with each request.
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-network-security
Question: 78
Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the
browser address bar.
When you are finished performing all the tasks, click the ‘Next’ button.
Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the
background while you complete the rest of the exam.
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live
environment. While most functionality will be available to you as it would be in a live environment,
some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible
by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words,
it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for
that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete.
You can use as much time as you would like to complete each lab. But, you should manage your time
appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in
the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be
able to return to the lab.
To start the lab
You may start the lab by clicking the Next button.
Your on-premises network uses an IP address range of 131.107.2.0 to 131.107.2.255.
You need to ensure that only devices from the on-premises network can connect to the
rg1lod7523691n1 storage account.
What should you do from the Azure portal?
Answer: See
solution below.
Explanation:
Step 1: Navigate to the rg1lod7523691n1 storage account.
Step 2: Click on the settings menu called Firewalls and virtual networks.
Step 3: Ensure that you have elected to allow access from 'Selected networks'.
Step 4: To grant access to an internet IP range, enter the address range of 131.107.2.0 to
131.107.2.255 (in CIDR format) under Firewall, Address Ranges.
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-network-security
Question: 79
Overview
by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t
matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
the time provided.
To start the lab
You plan to store media files in the rg1lod7523691n1 storage account.
You need to configure the storage account to store the media files. The solution must ensure that only
users who have access keys can download the media files and that the files are accessible only over
HTTPS.
What should you do from Azure portal?
Answer: See
solution below.
Explanation:
We should create an Azure file share.
Step 1: In the Azure portal, select All services. In the list of resources, type Storage Accounts. As you
begin typing, the list filters based on your input. Select Storage Accounts.
On the Storage Accounts window that appears.
Step 2: Locate the rg1lod7523691n1 storage account.
Step 3: On the storage account page, in the Services section, select Files.
Step 4: On the menu at the top of the File service page, click + File share. The New file share page
drops down.
Step 5: In Name type myshare. Click OK to create the Azure file share.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-portal
Question: 80
Overview
that task.
the time provided.
To start the lab
You plan to protect on-premises virtual machines and Azure virtual machines by using Azure Backup.
You need to prepare the backup infrastructure in Azure. The solution must minimize the cost of
storing the backups in Azure.
Answer: See
solution below.
Explanation:
First, create Recovery Services vault.

Step 1: On the left-hand menu, select All services and in the services list, type Recovery Services. As
you type, the list of resources filters. When you see Recovery Services vaults in the list, select it to
open the Recovery Services vaults menu.
Step 2: In the Recovery Services vaults menu, click Add to open the Recovery Services vault menu.
Step 3: In the Recovery Services vault menu, for example,

Type myRecoveryServicesVault in Name.
The current subscription ID appears in Subscription. If you have additional subscriptions, you could
choose another subscription for the new vault.
For Resource group select Use existing and choose myResourceGroup. If myResourceGroup doesn't
exist, select Create new and type myResourceGroup.
From the Location drop-down menu, choose West Europe.
Click Create to create your Recovery Services vault.

References: https://docs.microsoft.com/en-us/azure/backup/tutorial-backup-vm-at-scale
Question: 81
Overview
that task.
the time provided.
To start the lab
Another administrator attempts to establish connectivity between two virtual networks named VNET1
and VNET2.
The administrator reports that connections across the virtual networks fail.
You need to ensure that network connections can be established successfully between VNET1 and
VNET2 as quickly as possible.
Answer: See
solution below.
Explanation:
You can connect one VNet to another VNet using either a Virtual network peering, or an Azure VPN
Gateway.
To create a virtual network gateway
Step1 : In the portal, on the left side, click +Create a resource and type 'virtual network gateway' in
search. Locate Virtual network gateway in the search return and click the entry. On the Virtual
network gateway page, click Create at the bottom of the page to open the Create virtual network
gateway page.
Step 2: On the Create virtual network gateway page, fill in the values for your virtual network gateway.
Name: Name your gateway. This is not the same as naming a gateway subnet. It's the name of the
gateway object you are creating.
Gateway type: Select VPN. VPN gateways use the virtual network gateway type VPN.
Virtual network: Choose the virtual network to which you want to add this gateway. Click Virtual
network to open the 'Choose a virtual network' page. Select the VNet. If you don't see your VNet,
make sure the Location field is pointing to the region in which your virtual network is located.
Gateway subnet address range: You will only see this setting if you did not previously create a
gateway subnet for your virtual network. If you previously created a valid gateway subnet, this setting
will not appear.
Step 4: Select Create New to create a Gateway subnet.
Step 5: Click Create to begin creating the VPN gateway. The settings are validated and you'll see the
"Deploying Virtual network gateway" tile on the dashboard. Creating a gateway can take up to 45
minutes. You may need to refresh your portal page to see the completed status.
References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet-
resource-manager-portal?
Question: 82
Overview
that task.
the time provided.
To start the lab
You plan to configure VM1 to be accessible from the Internet.
You need to add a public IP address to the network interface used by VM1.
What should you do from Azure portal?
Answer: See
solution below.
Explanation:
You can add private and public IP addresses to an Azure network interface by completing the steps
that follow.
Step 1: In Azure portal, click More services > type virtual machines in the filter box, and then click
Virtual machines.
Step 2: In the Virtual machines pane, click the VM you want to add IP addresses to. Click Network
interfaces in the virtual machine pane that appears, and then select the network interface you want to
add the IP addresses to. In the example shown in the following picture, the NIC named myNIC from
the VM named myVM is selected:
Step 3: In the pane that appears for the NIC you selected, click IP configurations.
Step 4: Click Create public IP address.
Step 5: In the Create public IP address pane that appears, enter a Name, select an IP address
assignment type, a Subscription, a Resource group, and a Location, then click Create, as shown in
the following picture:
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-multiple-ip-
addresses-portal
Question: 83
Overview
that task.
the time provided.
To start the lab
You need to allow RDP connections over TCP port 3389 to VM1 from the internet. The solution must
prevent connections from the Internet over all other TCP ports.
Answer: See
solution below.
Explanation:
Step 1: Create a new network security group
Step 2: Select your new network security group.
Step 3: Select Inbound security rules, . Under Add inbound security rule, enter the following
Destination: Select Network security group, and then select the security group you created previously.
Destination port ranges: 3389
Protocol: Select TCP
References: https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-filter-network-traffic
Question: 84
Overview
that task.
the time provided.

To start the lab
You plan to migrate a large amount of corporate data to Azure Storage and to back up files stored on
old hardware to Azure Storage.
You need to create a storage account named corpdata7523690n1 in the corpdatalog7523690
resource group. The solution must meet the following requirements:
Corpdata7523690n1 must be able to host the virtual disk files for Azure virtual machines.
The cost of accessing the files must be minimized.
Replication costs must be minimized.
Answer: See
solution below.
Explanation:
Step 1: In the Azure portal, click All services. In the list of resources, type Storage Accounts. As you
Step 2: On the Storage Accounts window that appears, choose Add.
Step 3: Select the subscription in which to create the storage account.
Step 4: Under the Resource group field, select corpdatalog7523690.
Step 5: Enter a name for your storage account: corpdata7523690n1

Step 6: For Account kind select: General-purpose v2 accounts (recommended for most scenarios)
General-purpose v2 accounts is recommended for most scenarios. . General-purpose v2 accounts
deliver the lowest per-gigabyte capacity prices for Azure Storage, as well as industry-competitive
transaction prices.
Step 7: For replication select: Read-access geo-redundant storage (RA-GRS)
Read-access geo-redundant storage (RA-GRS) maximizes availability for your storage account. RA-
GRS provides read-only access to the data in the secondary location, in addition to geo-replication
across two regions.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-quickstart-create-account
https://docs.microsoft.com/en-us/azure/storage/common/storage-account-overview
Question: 85
Overview
that task.
the time provided.
To start the lab

You plan to move backup files and documents from an on-premises Windows file server to Azure
Storage. The backup files will be stored as blobs.
You need to create a storage account named corpdata7523690n2. The solution must meet the
following requirements:
 Ensure that the documents are accessible via drive mappings from Azure virtual machines
that run Windows Server 2016.
 Provide the highest possible redundancy for the documents.
 Minimize storage access costs.
Answer: See
solution below.
Explanation:
Step 1: In the Azure portal, click All services. In the list of resources, type Storage Accounts. As you
Step 2: On the Storage Accounts window that appears, choose Add.
Step 3: Select the subscription in which to create the storage account.
Step 4: Under the Resource group field, select Create New. Create a new Resource
Step 5: Enter a name for your storage account: corpdata7523690n2

Step 6: For Account kind select: General-purpose v2 accounts (recommended for most scenarios)
General-purpose v2 accounts is recommended for most scenarios. . General-purpose v2 accounts
deliver the lowest per-gigabyte capacity prices for Azure Storage, as well as industry-competitive
transaction prices.
Step 7: For replication select: Read-access geo-redundant storage (RA-GRS)
Read-access geo-redundant storage (RA-GRS) maximizes availability for your storage account. RA-
GRS provides read-only access to the data in the secondary location, in addition to geo-replication
across two regions.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-quickstart-create-account
https://docs.microsoft.com/en-us/azure/storage/common/storage-account-overview
Question: 86
Overview
that task.
the time provided.
To start the lab
You need to deploy two Azure virtual machines named VM1003a and VM1003b based on the Ubuntu
Server 17.10 image. The deployment must meet the following requirements:
 Provide a Service Level Agreement (SLA) of 99.95 percent availability.
 Use managed disks.
Answer: See
solution below.
Explanation:
1. Open the Azure portal.
2. On the left menu, select All resources. You can sort the resources by Type to easily find your
images.
3. Select the image you want to use from the list. The image Overview page opens.
4. Select Create VM from the menu.
5. Enter the virtual machine information.
Select VM1003a as the name for the first Virtual machine.
The user name and password entered here will be used to log in to the virtual machine. When
complete, select OK. You can create the new VM in an existing resource group, or choose Create
new to create a new resource group to store the VM.
6. Select a size for the VM. To see more sizes, select View all or change the Supported disk type
filter.
7. Under Settings, make changes as necessary and select OK.
8. On the summary page, you should see your image name listed as a Private image. Select Ok to
start the virtual machine deployment.
Repeat the procedure for the second VM and name it VM1003b.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/create-vm-
generalized-managed
Question: 87
Overview
that task.
the time provided.
To start the lab

You need to deploy an Azure virtual machine named VM1004a based on the Ubuntu Server 17.10
image, and then to configure VM1004a to meet the following requirements:
 The virtual machine must contain data disks that can store at least 15 TB of dat
 a.
 The data disks must be able to provide at least 2,000 IOPS.
 Storage costs must be minimized.
Answer: See
solution below.
Explanation:
1. Open the Azure portal.
2. On the left menu, select All resources. You can sort the resources by Type to easily find your
images.
3. Select the image you want to use from the list. The image Overview page opens.
4. Select Create VM from the menu.
5. Enter the virtual machine information.
Select VM1004a as the name for the first Virtual machine.
The user name and password entered here will be used to log in to the virtual machine. When
complete, select OK. You can create the new VM in an existing resource group, or choose Create
new to create a new resource group to store the VM.
6. Select a size for the VM. To see more sizes, select View all or change the Supported disk type
filter.
To support 15 TB of data you would need a Premium disk.
7. Under Settings, make changes as necessary and select OK.
8. On the summary page, you should see your image name listed as a Private image. Select Ok to
start the virtual machine deployment.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/create-vm-
generalized-managed
Question: 88
Overview
that task.
the time provided.

To start the lab
You plan to create 100 Azure virtual machines on each of the following three virtual networks:
 VNET1005a
 VNET1005b
 VNET1005c
All the network traffic between the three virtual networks will be routed through VNET1005
a.
You need to create the virtual networks, and then to ensure that all the Azure virtual machines can
connect to other virtual machines by using their private IP address. The solution must NOT require
any virtual network gateways and must minimize costs.
What should you do from the Azure portal before you configure IP routing?
Answer: See
solution below.
Explanation:
Step 1: Click Create a resource in the portal.
Step 2: Enter Virtual network in the Search the Marketplace box at the top of the New pane that
appears. Click Virtual network when it appears in the search results.
Step 3: Select Classic in the Select a deployment model box in the Virtual Network pane that
appears, then click Create.
Step 4: Enter the following values on the Create virtual network (classic) pane and then click Create:
Name: VNET1005a
Address space: 10.0.0.0/16
Subnet name: subnet0
Resource group: Create new
Subnet address range: 10.0.0.0/24
Subscription and location: Select your subscription and location.
Step 5: Repeat steps 3-5 for VNET1005b (10.1.0.0/16, 10.1.0.0/24), and for VNET1005c 10.2.0.0/16,
10.2.0.0/24).
References: https://docs.microsoft.com/en-us/azure/virtual-network/create-virtual-network-classic
Question: 89
Overview
that task.
the time provided.
To start the lab

You plan to create several virtual machines in different availability zones, and then to configure the
virtual machines for load balanced connections from the Internet.
You need to create an IP address resource named ip1006 to support the planned load balancing
solution. The solution must minimize costs.
Answer: See
solution below.
Explanation:
We should create a public IP address.
1. At the top, left corner of the portal, select + Create a resource.
2. Enter public ip address in the Search the Marketplace box. When Public IP address appears in the
search results, select it.
3. Under Public IP address, select Create.
4. Enter, or select values for the following settings, under Create public IP address, then select
Create:
Name: ip1006
SKU: Basic SKU
IP Version: IPv6
IP address assignment: Dynamic
Subscription: Select appropriate
Resource group: Select appropriate
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-public-ip-address
Question: 90
Overview
that task.
the time provided.

To start the lab
You plan to deploy several Azure virtual machines and to connect them to a virtual network named
VNET1007.
You need to ensure that future virtual machines in VNET1007 can register their name in an internal
DNS zone named corp7523690.com. The zone must NOT be hosted on a virtual machine.
What should you do from Azure Cloud Shell?
To complete this task, start Azure Cloud Shell and select PowerShell(Linux). Click Show
Advanced Settings, and then enter corp7523690n1 in the Storage account text box and File1
in the File share text box. Click Create storage, and then complete the task.
Answer: See
solution below.
Explanation:
Step 1: New-AzureRMResourceGroup -name MyResourceGroup
Before you create the DNS zone, create a resource group to contain the DNS zone.
Step 2: New-AzureRmDnsZone -Name corp7523690.com -ResourceGroupName MyResourceGroup
A DNS zone is created by using the New-AzureRmDnsZone cmdlet. This creates a DNS zone called
corp7523690.com in the resource group called MyResourceGroup.
References: https://docs.microsoft.com/en-us/azure/dns/dns-getstarted-powershell
Question: 91
Overview
that task.
the time provided.
To start the lab

You need to create a virtual network named VNET1008 that contains three subnets named subnet0,
subnet1, and subnet2. The solution must meet the following requirements:
 Connections from any of the subnets to the Internet must be blocked.
 Connections from the Internet to any of the subnets must be blocked.
 The number of network security groups (NSGs) and NSG rules must be minimized.
Answer: See
solution below.
Explanation:
Step 1: Click Create a resource in the portal.
Step 2: Enter Virtual network in the Search the Marketplace box at the top of the New pane that
appears. Click Virtual network when it appears in the search results.
Step 3: Select Classic in the Select a deployment model box in the Virtual Network pane that
appears, then click Create.
Step 4: Enter the following values on the Create virtual network (classic) pane and then click Create:
Name: VNET1008
Address space: 10.0.0.0/16
Subnet name: subnet0
Resource group: Create new
Subnet address range: 10.0.0.0/24
Subscription and location: Select your subscription and location.
Step 5: In the portal, you can create only one subnet when you create a virtual network. Click
Subnets (in the SETTINGS section) on the Create virtual network (classic) pane that appears.
Click +Add on the VNET1008 - Subnets pane that appears.
Step 6: Enter subnet1 for Name on the Add subnet pane. Enter 10.0.1.0/24 for Address range. Click
OK.
Step 7: Create the third subnet: Click +Add on the VNET1008 - Subnets pane that appears. Enter
subnet2 for Name on the Add subnet pane. Enter 10.0.2.0/24 for Address range. Click OK.
References: https://docs.microsoft.com/en-us/azure/virtual-network/create-virtual-network-classic
Question: 92
You have an Azure tenant that contains two subscriptions named Subscription1 and Subscription2.
In Subscription1, you deploy a virtual machine named Server1 that runs Windows Server 2016.
Server1 uses managed disks.
You need to move Server1 to Subscription2. The solution must minimize administration effort.
A. In Subscription2, create a copy of the virtual disk.

B. From Azure PowerShell, run the Move-AzureRmResource cmdlet.
C. Create a snapshot of the virtual disk.
D. Create a new virtual machine in Subscription2.
Answer: B
Explanation:
To move existing resources to another resource group or subscription, use the Move-
AzureRmResource
cmdlet.
References:
https://docs.microsoft.com/en-in/azure/azure-resource-manager/resource-group-move-
resources#moveresources
Question: 93
You have an Azure subscription that contains a resource group named RG1. RG1 contains 100 virtual
machines.
Your company has three cost centers named Manufacturing, Sales, and Finance.
You need to associate each virtual machine to a specific cost center.
What should you do?
A. Add an extension to the virtual machines.

B. Modify the inventory settings of the virtual machine.
C. Assign tags to the virtual machines.
D. Configure locks for the virtual machine.
Answer: C
References:
https://docs.microsoft.com/en-us/azure/billing/billing-getting-started
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags
Question: 94
You have an Azure policy as shown in the following exhibit.
Which of the following statements are true?

Which of the following statements are true?
A. You can create Azure SQL servers in ContosoRG1.

B. You are prevented from creating Azure SQL servers anywhere in Subscription 1.
C. You are prevented from creating Azure SQL Servers in ContosoRG1 only.
D. You can create Azure SQL servers in any resource group within Subscription 1.
Answer: A
Explanation:
You are prevented from creating Azure SQL servers anywhere in Subscription 1 with the exception of
ContosoRG1
Question: 95
Overview
by design.
the time provided.
To start the lab
You plan to connect several virtual machines to the VNET01-USEA2 virtual network.
In the Web-RGlod8095859 resource group, you need to create a virtual machine that uses the
Standard_B2ms size named Web01 that runs Windows Server 2016. Web01 must be added to an
availability set.
Answer: See
explanation
below.
Explanation:
Step 1. Choose Create a resource in the upper left-hand corner of the Azure portal.
Step 2. In the Basics tab, under Project details, make sure the correct subscription is selected and
then choose Web-RGlod8095859 resource group
Step 3. Under Instance details type/select:

Virtual machine name: Web01
Image: Windows Server 2016

Size: Standard_B2ms size
Leave the other defaults.
Step 4. Finish the Wizard
Question: 96
You have 5 TB of data that you need to transfer to Subscription.

You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?
A. Azure SQL Database

B. Azure Data Factory
C. A virtual machine
D. Azure Blob storage
Answer: D
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service
Question: 97
Overview
by design.
the time provided.
To start the lab
You plan to prevent users from accidentally deleting blob data from Azure.
You need to ensure that administrators can recover any blob data that is deleted accidentally from the
storagelod8095859 storage account for 14 days after the deletion occurred.
Answer: See
explanation
below.
Explanation:
Task A: Create a Recovery Services vault (if a vault already exists skip this task, go to Task B below)
A1. From Azure Portal, On the Hub menu, click All services and in the list of resources, type
Recovery Services and click Recovery Services vaults.
If there are recovery services vaults in the subscription, the vaults are listed.
A2. On the Recovery Services vaults menu, click Add.
A3. The Recovery Services vault blade opens, prompting you to provide a Name, Subscription,
Resource group, and Location
Task B. Create a backup goal
B1. On the Recovery Services vault blade (for the vault you just created), in the Getting Started
section, click Backup, then on the Getting Started with Backup blade, select Backup goal.
The Backup Goal blade opens. If the Recovery Services vault has been previously configured, then
the Backup Goal blades opens when you click Backup on the Recovery Services vault blade.
B2. From the Where is your workload running? drop-down menu, select Azure.
B3. From the What do you want to backup? menu, select Blob Storage, and click OK.
B4. Finish the Wizard.
Task C. create a backup schedule
C1. Open the Microsoft Azure Backup agent. You can find it by searching your machine for Microsoft
Azure Backup.
C2. In the Backup agent's Actions pane, click Schedule Backup to launch the Schedule Backup
Wizard.
C3. On the Getting started page of the Schedule Backup Wizard, click Next.
C4. On the Select Items to Backup page, click Add Items.
The Select Items dialog opens.
C5. Select Blob Storage you want to protect, and then click OK.
C6.In the Select Items to Backup page, click Next.
On the Specify Backup Schedule page, specify Schedule a backup every day, and click Next.
C7. On the Select Retention Policy page, set it to 14 days, and click Next.
C8. Finish the Wizard.

References:
Question: 98
Overview
by design.
the time provided.
To start the lab
Your company plans to store several documents on a public website.
You need to create a container named bios that will host the documents in the storagelod8095859
storage account. The solution must ensure anonymous access and must ensure that users can
browse folders in the container.
Answer: See
explanation
below.
Explanation:
Azure portal create public container
To create a container in the Azure portal, follow these steps:
Step 1. Navigate to your new storage account in the Azure portal.
Step 2. In the left menu for the storage account, scroll to the lob service section, then select Blobs.
Select the + Container button.
Type a name for your new container: bios
Set the level of public access to the container: Select anonymous access.
Step 3. Select OK to create the container.

References:
https://docs.microsoft.com/en-us/azure/storage/blobs/storage-quickstart-blobs-portal
Question: 99
Overview
by design.
the time provided.
To start the lab
Your company plans to host in Azure the source files of several line-of-business applications.
You need to create an Azure file share named corpsoftware in the storagelod8095859 storage
account. The solution must ensure the corpsoftware can store only up to 250 GB of dat
a.
Answer: See
explanation
below.
Explanation:
Step 1. Go to the Storage Account blade on the Azure portal:
Step 2. Click on add File Share button:
Step 3. Provide Name (storagelod8095859) and Quota (250 GB).
References:
https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-create-file-share
Question: 100
You plan to back up an Azure virtual machine named VM1.

You discover that the Backup Pre-Check status displays a status of Warning.
What is a possible cause of the Warning status?
A. VM1 does not have the latest version of WaAppAgent.exe installed.

B. VM1 has an unmanaged disk.
C. VM1 is stopped.
D. A Recovery Services vault is unavailable.
Answer: A
Explanation:
The Warning state indicates one or more issues in VM’s configuration that might lead to backup
failures and provides recommended steps to ensure successful backups. Not having the latest VM
Agent installed, for example, can cause backups to fail intermittently and falls in this class of issues.
References:
https://azure.microsoft.com/en-us/blog/azure-vm-backup-pre-checks/
Question: 101
You have two Azure virtual machines named VM1 and VM2. You have two Recovery Services vaults
named RSV1 and RSV2.
VM2 is protected by RSV1.
You need to use RSV2 to protect VM2.
A. From the RSV1 blade, click Backup items and stop the VM2 backup.
B. From the RSV1 blade, click Backup Jobs and export the VM2 backup.
C. From the RSV1 blade, click Backup. From the Backup blade, select the backup for the virtual
machine, and then click Backup.
D. From the VM2 blade, click Disaster recovery, click Replication settings, and then select RSV2 as
the Recovery Services vault.
Answer: D
References:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-arm
Question: 102
You have an Azure virtual machine named VM1 that you use for testing. VM1 is protected by Azure
Backup.
You delete VM1.

You need to remove the backup data stored for VM1.
A. Modify the backup policy.

B. Delete the Recovery Services vault.
C. Stop the backup.
D. Delete the storage account.
Answer: A
Explanation:
Azure Backup provides backup for virtual machines — created through both the classic deployment
model and the Azure Resource Manager deployment model — by using custom-defined backup
policies in a Recovery Services vault.
With the release of backup policy management, customers can manage backup policies and model
them to meet their changing requirements from a single window. Customers can edit a policy,
associate more virtual machines to a policy, and delete unnecessary policies to meet their compliance
requirements.
Question: 103
HOTSPOT
You plan to deploy 20 Azure virtual machines by using an Azure Resource Manager template. The
virtual machines will run the latest version of Windows Server 2016 Datacenter by using an Azure
Marketplace image.
You need to complete the storageProfile section of the template.
How should you complete the storageProfile section? To answer, select the appropriate options
in the answer are
a.
Answer:
Explanation:
…
"storageProfile": {
"imageReference": {
"publisher": "MicrosoftWindowsServer",
"offer": "WindowsServer",
"sku": "2016-Datacenter",
"version": "latest"
},
…
References:
https://docs.microsoft.com/en-us/rest/api/compute/virtualmachines/createorupdate
Question: 104

You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit.
(Click the Exhibit button.)
You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual
machines.
What should you modify on VM1?
A. Integration Services
B. the network adapters
C. the memory
D. the hard drive
E. the processor
Answer: D
Explanation:
From the exhibit we see that the disk is in the VHDX format.
Before you upload a Windows virtual machines (VM) from on-premises to Microsoft Azure, you must
prepare the virtual hard disk (VHD or VHDX). Azure supports only generation 1 VMs that are in the
VHD file format and have a fixed sized disk. The maximum size allowed for the VHD is 1,023 GB. You
can convert a generation 1 VM from the VHDX file system to VHD and from a dynamically expanding
disk to fixed-sized.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/prepare-for-upload-vhd-
image?toc=%2fazure%2fvirtual-machines%2fwindows%2ftoc.json
Question: 105
HOTSPOT
You create a virtual machine scale set named Scale1. Scale1 is configured as shown in the following
exhibit.
Answer:
Explanation:
Box 1:
The Autoscale scale out rule increases the number of VMs by 2 if the CPU threshold is 80% or
higher. The initial instance count is 4 and rises to 6 when the 2 extra instances of VMs are added.
Box 2:
The Autoscale scale in rule decreases the number of VMs by 4 if the CPU threshold is 30% or lower.
The initial instance count is 4 and thus cannot be reduced to 0 as the minimum instances is set to 2.
Instances are only added when the CPU threshold reaches 80%.
References:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-overview
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-best-practices
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-common-scale-patterns
Question: 106
Overview
by design.
the time provided.
To start the lab
You plan to back up all the Azure virtual machines in your Azure subscription at 02:00 Coordinated
Universal Time (UTC) daily.
You need to prepare the Azure environment to ensure that any new virtual machines can be
configured quickly for backup. The solution must ensure that all the daily backups performed at 02:00
UTC are stored for only 90 days.
Answer: See
explanation
below.
Explanation:
Task A: Create a Recovery Services vault (if a vault already exists skip this task, go to Task B below)
A1. From Azure Portal, On the Hub menu, click All services and in the list of resources, type
Recovery Services and click Recovery Services vaults.
If there are recovery services vaults in the subscription, the vaults are listed.
A2. On the Recovery Services vaults menu, click Add.
A3. The Recovery Services vault blade opens, prompting you to provide a Name, Subscription,
Resource group, and Location
Task B.
B1. On the Recovery Services vault blade (for the vault you just created), in the Getting Started
section, click Backup, then on the Getting Started with Backup blade, select Backup goal.
The Backup Goal blade opens. If the Recovery Services vault has been previously configured, then
the Backup Goal blades opens when you click Backup on the Recovery Services vault blade.
B2. From the Where is your workload running? drop-down menu, select Azure.
B3. From the What do you want to backup? menu, select Virtual Machine, and click OK.
B4. Finish the Wizard.

Task C. create a backup schedule
C1. Open the Microsoft Azure Backup agent. You can find it by searching your machine for Microsoft
Azure Backup.
C2. In the Backup agent's Actions pane, click Schedule Backup to launch the Schedule Backup
Wizard.
C3. On the Getting started page of the Schedule Backup Wizard, click Next.
C4. On the Select Items to Backup page, click Add Items.

The Select Items dialog opens.
C5. Select Blob Storage you want to protect, and then click OK.
C6.In the Select Items to Backup page, click Next.
On the Specify Backup Schedule page, specify
Schedule a backup every: day
At the following times: 2.00 AM
C7. On the Select Retention Policy page, set it to 90 days, and click Next.
C8. Finish the Wizard.

References:
Question: 107
Overview
by design.
the time provided.
To start the lab
You recently created a virtual machine named Web01.
You need to attach a new 80-GB standard data disk named Web01-Disk1 to Web01.
Answer: See
explanation
below.
Explanation:
Add a data disk
Step 1. In the Azure portal, from the menu on the left, select Virtual machines.
Step 2. Select the Web01 virtual machine from the list.
Step 3. On the Virtual machine page, , in Essentials, select Disks.
Step 4. On the Disks page, select the Web01-Disk1 from the list of existing disks.

Step 5. In the Disks pane, click + Add data disk.
Step 6. Click the drop-down menu for Name to view a list of existing managed disks accessible to
your Azure subscription. Select the managed disk Web01-Disk1 to attach:
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/linux/attach-disk-portal
Question: 108
You have a virtual network named VNet1 as shown in the exhibit. (Click the Exhibit tab.)
No devices are connected to VNet1.

You plan to peer VNet1 to another virtual network named VNet2 in the same region. VNet2 has an
address space of 10.2.0.0/16.
You need to create the peering.
A. Configure a service endpoint on VNet2.

B. Modify the address space of VNet1.
C. Add a gateway subnet to VNet1.
D. Create a subnet on VNet1 and VNet2.
Answer: B
Explanation:
The virtual networks you peer must have non-overlapping IP address spaces. The exhibit indicates
that VNet1 has an address space of 10.2.0.0/16, which is the same as VNet2, and thus overlaps. We
need to change the address space for VNet1.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-
Question: 109
Overview
by design.
the time provided.
To start the lab
You plan to allow connections between the VNET01-USEA2 and VNET01-USWE2 virtual networks.
You need to ensure that virtual machines can communicate across both virtual networks by using
their private IP address. The solution must NOT require any virtual network gateways.
Answer: See
explanation
below.
Explanation:
Virtual network peering enables you to seamlessly connect two Azure virtual networks. Once peered,
the virtual networks appear as one, for connectivity purposes.
Peer virtual networks
Step 1. In the Search box at the top of the Azure portal, begin typing VNET01-USEA2. When
VNET01-USEA2 appears in the search results, select it.
Step 2. Select Peerings, under SETTINGS, and then select + Add, as shown in the following picture:
Step 3. Enter, or select, the following information, accept the defaults for the remaining settings, and
then select OK.
Name: myVirtualNetwork1-myVirtualNetwork2 (for example)
Subscription: elect your subscription.
Virtual network: VNET01-USWE2 - To select the VNET01-USWE2 virtual network, select Virtual
network, then select VNET01-USWE2. You can select a virtual network in the same region or in a
different region.
Now we need to repeat steps 1-3 for the other network VNET01-USWE2:
Step 4. In the Search box at the top of the Azure portal, begin typing VNET01- USEA2. When
VNET01- USEA2 appears in the search results, select it.
Step 5. Select Peerings, under SETTINGS, and then select + Add.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-connect-virtual-networks-portal
Question: 110
Overview
by design.
the time provided.
To start the lab
You plan to host several secured websites on Web01.
You need to allow HTTPS over TCP port 443 to Web01 and to prevent HTTP over TCP port 80 to
Web01.
Answer: See
explanation
below.
Explanation:
You can filter network traffic to and from Azure resources in an Azure virtual network with a network
security group. A network security group contains security rules that allow or deny inbound network
traffic to, or outbound network traffic from, several types of Azure resources.
A network security group contains security rules that allow or deny inbound network traffic to, or
outbound network traffic from, several types of Azure resources.
Step A: Create a network security group
A1. Search for and select the resource group for the VM, choose Add, then search for and select
Network security group.
A2. Select Create.
The Create network security group window opens.

A3. Create a network security group
Enter a name for your network security group.
Select or create a resource group, then select a location.
A4. Select Create to create the network security group.
Step B: Create an inbound security rule to allows HTTPS over TCP port 443
B1. Select your new network security group.
B2. Select Inbound security rules, then select Add.
B3. Add inbound rule
B4. Select Advanced.
From the drop-down menu, select HTTPS.
You can also verify by clicking Custom and selecting TCP port, and 443.
B5. Select Add to create the rule.
Repeat step B2-B5 to deny TCP port 80
B6. Select Inbound security rules, then select Add.
B7. Add inbound rule
B8. Select Advanced.
Clicking Custom and selecting TCP port, and 80.
B9. Select Deny.
Step C: Associate your network security group with a subnet
Your final step is to associate your network security group with a subnet or a specific network
interface.
C1. In the Search resources, services, and docs box at the top of the portal, begin typing Web01.
When the Web01 VM appears in the search results, select it.
C2. Under SETTINGS, select Networking. Select Configure the application security groups, select the
Security Group you created in Step A, and then select Save, as shown in the following picture:
References:
https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-filter-network-traffic
Question: 111
HOTSPOT
You are evaluating the connectivity between the virtual machines after the planned implementation of
the Azure networking infrastructure.
Answer:
Explanation:
Box 1: Yes
All client computers in the Paris office will be joined to an Azure AD domain.
A virtual network named Paris-VNet that will contain two subnets named Subnet1 and Subnet2
Box 2: Yes
A virtual network named ClientResources-VNet that will contain one subnet named ClientSubnet
You plan to create a private DNS zone named humongousinsurance.local and set the registration
network to the ClientResources-VNet virtual network.
Box 3: No
Only VMs in the registration network, here the ClientResources-VNet, will be able to register
hostname records.
References:
https://docs.microsoft.com/en-us/azure/dns/private-dns-overview
Question: 112
HOTSPOT
You have an Azure Active Directory (Azure AD) tenant.

You need to create a conditional access policy that requires all users to use multi-factor
authentication when they access the Azure portal.
Which three settings should you configure? To answer, select the appropriate settings in the answer
are
a.
Answer:
Box 1: Assignments, Users and Groups

When you configure the sign-in risk policy, you need to set:
The users and groups the policy applies to: Select Individuals and Groups
Box 2:
When you configure the sign-in risk policy, you need to set the type of access you want to be
enforced.
Box 3:
When you configure the sign-in risk policy, you need to set:
The type of access you want to be enforced when your sign-in risk level has been met:
References:
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/howto-user-risk-policy
Question: 113

You have 100 Azure virtual machines.
You need to quickly identify underutilized virtual machines that can have their service tier
changed to a less expensive offering.
Which blade should you use?
A. Metrics
B. Customer insights
C. Monitor
D. Advisor
Answer: D
References:
https://docs.microsoft.com/en-us/azure/advisor/advisor-cost-recommendations
https://docs.microsoft.com/bs-latn-ba/azure/cost-management/tutorial-acm-opt-
recommendations
Question: 114
HOTSPOT
You have an Azure subscription named Subscroption1.
In Subscription1, you create an alert rule named Alert1.
The Alert1 action group is configured as shown in the following exhibit.
Alert1 alert criteria is triggered every minute.

Answer:
Box 1: 60
One alert per minute will trigger one email per minute.
Box 2: 12
No more than 1 SMS every 5 minutes can be send, which equals 12 per hour.
Note: Rate limiting is a suspension of notifications that occurs when too many are sent to a particular
phone number, email address or device. Rate limiting ensures that alerts are manageable and
actionable.
The rate limit thresholds are:
SMS: No more than 1 SMS every 5 minutes.
Voice: No more than 1 Voice call every 5 minutes.
Email: No more than 100 emails in an hour.
Other actions are not rate limited.
References:
https://github.com/MicrosoftDocs/azure-docs/blob/master/articles/monitoring-and-
diagnostics/monitoring-overview-alerts.md
Question: 115
HOTSPOT
You have an Azure subscription that contains several virtual machines and an Azure Log
Analytics workspace named Workspace1. You create a log search query as shown in the
following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on
the information presented in the graphic.
Answer:
Explanation:
Box 1: 14 days
Two weeks will be covered.
Note: Startofweek returns the start of the week containing the date, shifted by an offset, if provided.
Start of the week is considered to be a Sunday.
Endofweek returns the end of the week containing the date, shifted by an offset, if provided.
Last day of the week is considered to be a Saturday.
Box 2:
The render operator renders results in as graphical output. Timechart is a Line graph, where the first
column is x-axis, and should be datetime. Other columns are y-axes. In this case the Y axis has
avg(CounterValue) Values.
References:
https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/log-query-overview
https://docs-analytics-eus.azurewebsites.net/queryLanguage/query_language_renderoperator.html
Question: 116
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
You hire a temporary vendor. The vendor uses a Microsoft account that has a sign-in of
user1@outlook.com.
You need to ensure that the vendor can authenticate to the tenant by using user1@outlook.com.
What should you do?
A. From Windows PowerShell, run the New-AzureADUser cmdlet and specify the –
UserPrincipalName
user1@outlook.com parameter.
B. From the Azure portal, add a custom domain name, create a new Azure AD user, and then specify
user1@outlook.com as the username.
C. From Azure Cloud Shell, run the New-AzureADUser cmdlet and specify the –UserPrincipalName
user1@outlook.com parameter.
D. From the Azure portal, add a new guest user, and then specify user1@outlook.com as the email
address.
Answer: A
Explanation:
UserPrincipalName - contains the UserPrincipalName (UPN) of this user. The UPN is what the user
will use when they sign in into Azure AD. The common structure is @, so for Abby Brown in
Contoso.com, the UPN would be AbbyB@contoso.com
Example:
To create the user, call the New-AzureADUser cmdlet with the parameter values:
powershell New-AzureADUser -AccountEnabled $True -DisplayName "Abby Brown" -PasswordProfile
$PasswordProfile -MailNickName "AbbyB" -UserPrincipalName "AbbyB@contoso.com"
References:
https://docs.microsoft.com/bs-cyrl-ba/powershell/azure/active-directory/new-user-
sample?view=azureadps-2.0
Question: 117
HOTSPOT
You enable password reset for contoso.onmicrosoft.com as shown in the Password Reset exhibit
(Click the Password Reset tab.)
You configure the authentication methods for password reset as shown in the Authentication
Methods exhibit. (Click the Authentication Methods tab.)
You enable password reset for contoso.onmicrosoft.com as shown in the Password Reset exhibit
(Click the Password Reset tab.)
You configure the authentication methods for password reset as shown in the Authentication
Methods exhibit. (Click the Authentication Methods tab.)
Answer:
Explanation:
Box 1: No
Two methods are required.
Box 2: No
Self-service password reset is only enabled for Group2, and User1 is not a member of Group2.
Box 3: Yes
As a User Administrator User3 can add security questions to the reset process.
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/quickstart-sspr
https://docs.microsoft.com/en-us/azure/active-directory/authentication/active-directory-passwords-faq
Question: 118
You have an Azure subscription that contains three virtual networks named VNet1, VNet2, VNet3.
VNet2
contains a virtual appliance named VM2 that operates as a router.

You are configuring the virtual networks in a hub and spoke topology that uses VNet2 as the hub
network.
You plan to configure peering between VNet1 and VNet2 and between VNet2 and VNet3.
You need to provide connectivity between VNet1 and VNet3 through VNet2.
Which two configurations should you perform? Each correct answer presents part of the solution.
A. On the peering connections, allow forwarded traffic.

B. On the peering connections, allow gateway transit.
C. Create route tables and assign the table to subnets.
D. Create a route filter.
E. On the peering connections, use remote gateways.
Answer: BE
Explanation:
Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual
network and want to allow traffic from the peered virtual network to flow through the gateway.
The peered virtual network must have the Use remote gateways checkbox checked when setting up
the peering from the other virtual network to this virtual network.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-
Question: 119
DRAG DROP
You have an Azure subscription that contains an Azure file share.
You have an on-premises server named Server1 that runs Windows Server 2016.
You plan to set up Azure File Sync between Server1 and the Azure file share.
You need to prepare the subscription for the planned Azure File Sync.
Which two actions should you perform in the Azure subscription? To answer, drag the appropriate
actions to the correct targets. Each action may be used once, more than once, or not at all. You may
need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
First action: Create a Storage Sync Service
The deployment of Azure File Sync starts with placing a Storage Sync Service resource into a
resource group of your selected subscription.
Second action: Run Server Registration
between your server (or cluster) and the Storage Sync Service. A server can only be registered to
one Storage Sync Service and can sync with other servers and Azure file shares associated with the
same Storage Sync Service.
The Server Registration UI should open automatically after installation of the Azure File Sync agent.
Incorrect Answers:
Not Install the Azure File Sync agent: The Azure File Sync agent is a downloadable package that
enables Windows Server to be synced with an Azure file share.
Question: 120
HOTSPOT
You need to create an Azure Storage account that meets the following requirements:
• Minimizes costs
• Supports hot, cool, and archive blob tiers
• Provides fault tolerance if a disaster affects the Azure region where the account resides
How should you complete the command? To answer, select the appropriate options in the
answer are
a. NOTE: Each correct selection is worth one point
Answer:
Explanation:
Box 1: StorageV2
You may only tier your object storage data to hot, cool, or archive in Blob storage and General
Purpose v2 (GPv2) accounts. General Purpose v1 (GPv1) accounts do not support tiering.
General-purpose v2 accounts deliver the lowest per-gigabyte capacity prices for Azure Storage, as
well as industry-competitive transaction prices.
Box 2: Standard_GRS
Geo-redundant storage (GRS): Cross-regional replication to protect against region-wide unavailability.
Incorrect Answers:
Locally-redundant storage (LRS): A simple, low-cost replication strategy. Data is replicated within a
single storage scale unit.
Read-access geo-redundant storage (RA-GRS): Cross-regional replication with read access to the
replica. RA-GRS provides read-only access to the data in the secondary location, in addition to geo-
replication across two regions, but is more expensive compared to GRS.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-grs
https://docs.microsoft.com/en-us/azure/storage/blobs/storage-blob-storage-tiers
Question: 121
HOTSPOT
You have an Azure subscription named Subscrption1 that is associated to an Azure Active Directory
(Azure AD) tenant named AAD1.
Subscription1 contains the objects in the following table:
You plan to create a single backup policy for Vault1. To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
Box 1: RG1 only
Box 2: 99 years
With the latest update to Azure Backup, customers can retain their data for up to 99 years in Azure.
Note: A backup policy defines a matrix of when the data snapshots are taken, and how long those
snapshots are retained.
The backup policy interface looks like this:
References: https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-
arm#defining-a-backup-policy
https://blogs.microsoft.com/firehose/2015/02/16/february-update-to-azure-backup-includes-data-
retention-up-to-99-years-offline-backup-and-more/
Question: 122
HOTSPOT
You have an Azure subscription that contains a virtual network named VNet1. VNet1 uses an IP
address space of 10.0.0.0/16 and contains the subnets in the following table.
Subnet1 contains a virtual appliance named VM1 that operates as a router.

You create a routing table named RT1.
You need to route all inbound traffic to VNet1 through VM1.
How should you configure RT1? To answer, select the appropriate options in the answer are
a.
Answer:
Question: 123
HOTSPOT
You have several Azure virtual machines on a virtual network named VNet1.
You configure an Azure Storage account as shown in the following exhibit.
Answer:
Explanation:
Box 1: always
Endpoint status is enabled.
Box 2: Never
After you configure firewall and virtual network settings for your storage account, select Allow trusted
Microsoft services to access this storage account as an exception to enable Azure Backup service to
access the network restricted storage account.
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
https://azure.microsoft.com/en-us/blog/azure-backup-now-supports-storage-accounts-secured-with-
azure-storage-firewalls-and-virtual-networks/
Question: 124
You have 5 TB of data that you need to transfer to Subscription1.

You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?
A. Azure SQL Database

B. Azure File Storage
C. An Azure Cosmos DB database
D. The Azure File Sync Storage Sync Service
E. Azure Data Factory
F. A virtual machine
Answer: B
Explanation:
Azure Import/Export service is used to securely import large amounts of data to Azure Blob storage
and Azure Files by shipping disk drives to an Azure datacenter.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service
Question: 125
HOTSPOT
You have an Azure subscription1 that contains the resource shown in the following table.
The status of VM1 is Running.

You assign an Azure policy as shown in the exhibit. (Click the Exhibit tab.)
You assign the policy by using the following parameters.
For each of the following statements, select YES if the statements is true. Otherwise, select No.
Note: Each correct selection is worth one point.
Answer:
Question: 126
You have an Azure subscription that contains the resources shown in the following table.
The Not allowed resources types Azure policy is assigned to RG1 and uses the following parameters:
In RG1, you need to create a new virtual named VM2, and then connected VM2 to VNET1.
A. Add a subnet to VNET1.

B. Remove Microsft.Network/virtualsNetwork from the policy.
C. Creata an Azure resource Manager template.
D. Remove Microsoft. Compute/virtualmachine from the policy
Answer: B
Question: 127
You have an azure subscription named Subscription that contains the resource groups shown in the
following table.
In RG1, you create a virtual machine named VM1 in the East Asia location.
You plan to create a virtual network named VNET1.
You need to create VNET, and then connect VM1 to VNET1.
What are two possible ways to achieve this goal? Each correct answer presents a complete a
solution.
A. Create VNET1 in RG2, and then set East Asia as the location.
B. Create VNET1 in a new resource group in the West US location, and then set West US as the
location.
C. Create VNET1 in RG1, and then set East Asia as the location
D. Create VNET1 in RG1, and then set East US as the location.
E. Create VNET1 in RG2, and then set East US as the location.
Answer: AC
Question: 128
Note: This question is part of a series of questions that present the same scenario.
Each question in the series contains a unique solution that might meet the stated
goals. Some question sets might have more than one correct solution, while others
might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a
result, these questions will not appear in the review screen.
You have an Azure web app named Appl. App1 runs in an Azure App Service plan
named Plan1. Plan1 is associated to the Free pricing tier.
You discover that App1 stops each day after running continuously for 60 minutes.
You need to ensure that App1 can run continuously for the entire day.
Solution: You change the pricing tier of Plan1 to Basic. Does this meet the goal?
A. Yes
B. No
Answer: A
Explanation:
The Free Tier provides 60 CPU minutes / day. This explains why App1 is stops. The Basic tier has no
such cap.
References:
https://azure.microsoft.com/en-us/pricing/details/app-service/windows/
Question: 129
Note: This question is part of a series of questions that present the same scenario
ion in the series contains a unique solution that might meet the stated not have a
correct solution.
You have an Azure web app named Appl. App1 runs in an Azure App Service plan
Solution: You add a triggered WebJob to App1.
A. Yes
B. No
Answer: B
Explanation:
You need to change to Basic pricing Tier.
Note: The Free Tier provides 60 CPU minutes / day. This explains why App1 is stops. The Basic tier
has no such cap.
References:
Question: 130
After you answer a question in this section, you will NOT be able to return to it As a
result these questions will not appear in the review screen.
You have an Azure wet) app named Appl. App1 runs in an Azure App Service plan
Solution: You change the pricing tier of Plan1 to Shared.
A. Yes
B. No
Answer: B
Explanation:
You should switch to the Basic Tier.
The Free Tier provides 60 CPU minutes / day. This explains why App1 is stops. The Shared Tier
provides 240 CPU minutes / day. The Basic tier has no such cap.
References:
Question: 131
After you answer
a question in this section, you will NOT be able to return to it As a result, these
questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure
Subscript contains a resource group named Dev.
d Subscription1. Adatum contains a group named Developers. Subscription!
You need to provide the Developers group with the ability to create Azure logic apps
in the; Dev, resource group.
Solution: On Dev, you assign the Logic App Contributor role to the Developers
group.
A. Yes
B. No
Answer: A
Explanation:
The Logic App Contributor role lets you manage logic app, but not access to them. It provides access
to view, edit, and update a logic app.
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles
https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-securing-a-logic-app
Question: 132
correct solution.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription
named Subscription1. Adatum contains a group named Developers. Subscription1 contains a
resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev
resource group.
Solution: On Subscription1, you assign the Logic App Operator role to the Developers group.
A. Yes
B. No
Answer: B
Explanation:
The Logic App Operator role only lets you read, enable and disable logic app. With it you can view the
logic app and run history, and enable/disable. Cannot edit or update the definition.
You would need the Logic App Contributor role.
References:
Question: 133
correct solution.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription
named Subscription1. Adatum contains a group named Developers. Subscription1 contains a
resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev
resource group.
Solution: On Subscription1, you assign the DevTest Labs User role to the Developers group.
A. Yes
B. No
Answer: B
Explanation:
DevTest Labs User role only lets you connect, start, restart, and shutdown virtual machines in your
Azure DevTest Labs.
You would need the Logic App Contributor role.
References:
Question: 134
Note This question is part of a series of questions that present the same seer Some
question sets might have more than one correct solution, while others might not
have a correct solution.
You manage a virtual network named VNet1 that is hosted in the West US Azure
region.
VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three
hours.
Solution: From Performance Monitor, you create a Data Collector Set (DCS)
A. Yes
B. No
Answer: B
Explanation:
You should use Azure Network Watcher.
References:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-monitoring-overview
Question: 135
goals.
Some question sets might have more than one correct solution, while others might
not have a correct solution.
After you answer a question in this section, you will NOT be able to return to these
questions will not appear m the review screen.
You manage a virtual network named VNetl1 that is hosted in the West US Azure
region.
VNetl1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three
hours.
Solution: From Azure Network Watcher, you create a packet capture.

A. Yes
B. No
Answer: A
Explanation:
Azure Network Watcher provides tools to monitor, diagnose, view metrics, and enable or disable logs
for resources in an Azure virtual network.
Capture packets to and from a VM
Advanced filtering options and fine-tuned controls, such as the ability to set time and size limitations,
provide versatility. The capture can be stored in Azure Storage, on the VM's disk, or both. You can
then analyze the capture file using several standard network capture analysis tools.
Network Watcher variable packet capture allows you to create packet capture sessions to track traffic
to and from a virtual machine. Packet capture helps to diagnose network anomalies both reactively
and proactivity.
References:
Question: 136
correct solution.
You manage a virtual network named VNet1 that is hosted in the West US Azure region.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Azure Monitor, you create a metric on Network In and Network Out.
A. Yes
B. No
Answer: B
Explanation:
You should use Azure Network Watcher.
References:
Question: 137
HOTSPOT
You create an Azure web app named WebApp1. WebApp1 has the autoscale settings shown in the
following exhibit.
The scale out and scale in rules are configured to have a duration of 10 minutes and a cool down time
of five minutes.
Answer:
Question: 138
DRAG DROP
You have an Azure subscription that contains an Azure Service Bus named Bus1.
Your company plans to deploy two Azure web apps named App1 and App2. The web apps will create
messages that have the following requirements:
 Each message created by App1 must be consumed by only a single consumer
 Each message created by App2 will be consumed by multiple consumers.
Which resource should you create for each web app? To answer, drag the appropriate resources to
the correct web apps. Each resource may be used once, more than once, or not at all. You may need
to drag the split bar between panes or scroll to view content.
Answer:
Question: 139
DRAG DROP
You are developing an Azure web app named WebApp1. WebApp1 uses an Azure App Service plan
named Plan1 that uses the B1 pricing tier.
You need to configure WebApp1 to add additional instances of the app when CPU usage exceeds 70
percent for 10 minutes.
Answer:
Explanation:
Box 1: From the Scale out (App Service Plan) settings blade, change the pricing tier
The B1 pricing tier only allows for 1 core. We must choose another pricing tier.
Box 2: From the Scale out (App Service Plan) settings blade, enable autoscale
1. Log in to the Azure portal at http://portal.azure.com
2. Navigate to the App Service you would like to autoscale.
3. Select Scale out (App Service plan) from the menu
4. Click on Enable autoscale. This activates the editor for scaling rules.
Box 3: From the Scale mode to Scale based on metric, add a rule, and set the instance limits.
Click on Add a rule. This shows a form where you can create a rule and specify details of the scaling.
References:
https://blogs.msdn.microsoft.com/hsirtl/2017/07/03/autoscaling-azure-web-apps/
Question: 140
A web developer creates a web application that you plan to deploy as an Azure web
app.
Users must enter credentials to access the web application.
You create a new web app named WebAppl1 and deploy the web application to
WebApp1.
You need to disable anonymous access to WebApp1.

What should you configure?
A. Advanced Tools
B. Authentication/ Authorization
C. Access control (IAM)
D. Deployment credentials
Answer: B
Explanation:
Anonymous access is an authentication method. It allows users to establish an anonymous
connection.
References:
https://docs.microsoft.com/en-us/biztalk/core/guidelines-for-resolving-iis-permissions-problems
Question: 141
You are building a custom Azure function app to connect to Azure Event Grid.
You need to ensure that resources are allocated dynamically to the function app.
Billing must be based on the executions of the app.
What should you configure when you create the function app?
A. the Windows operating system and the Consumption plan hosting plan
B. the Windows operating system and the App Service plan hosting plan
C. the Docker container and an App Service plan that uses the Bl1 pricing tier
D. the Docker container and an App Service plan that uses the SI pricing
Answer: A
Explanation:
Azure Functions runs in two different modes: Consumption plan and Azure App Service plan. The
Consumption plan automatically allocates compute power when your code is running. Your app is
scaled out when needed to handle load, and scaled down when code is not running.
Incorrect Answers:
B: When you run in an App Service plan, you must manage the scaling of your function app.
References:
https://docs.microsoft.com/en-us/azure/azure-functions/functions-create-first-azure-function
Question: 142
You have an Azure App Service plan named AdatumASP1 that uses the P2v2
pricing tier. AdatumASP1 hosts Ml Azure web app named adatumwebapp1. You
need to delegate the management of adatumwebapp1 to a group named Devs.
Devs must be able to perform the following tasks:
• Add deployment slots.
• View the configuration of AdatumASP1.
• Modify the role assignment for adatumwebapp1.
Which role should you assign to the Devs group?
A. Owner
B. Contributor
C. Web Plan Contributor
D. Website Contributor
Answer: B
Explanation:
The Contributor role lets you manage everything except access to resources.
Incorrect Answers:
A: The Owner role lets you manage everything, including access to resources.
C: The Web Plan Contributor role lets you manage the web plans for websites, but not access to
them.
D: The Website Contributor role lets you manage websites (not web plans), but not access to them.
References:
Question: 143
HOTSPOT
You have an Azure web app named WebApp1 that runs in an Azure App Service plan named ASP1.
ASP1 is based on the D1 pricing tier.
You need to ensure that WebApp1 can be accessed only from computers on your on-premises
network. The solution must minimize costs.
What should you configure? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
Box 1: B1
B1 (Basic) would minimize cost compared P1v2 (premium) and S1 (standard).
Box 2: Cross Origin Resource Sharing (CORS)
Once you set the CORS rules for the service, then a properly authenticated request made against the
service from a different domain will be evaluated to determine whether it is allowed according to the
rules you have specified.
Note: CORS (Cross Origin Resource Sharing) is an HTTP feature that enables a web application
running under one domain to access resources in another domain. In order to reduce the possibility of
cross-site scripting attacks, all modern web browsers implement a security restriction known as
same-origin policy. This prevents a web page from calling APIs in a different domain. CORS provides
a secure way to allow one origin (the origin domain) to call APIs in another origin.
References:
https://docs.microsoft.com/en-us/azure/cdn/cdn-cors
Question: 144
HOTSPOT
You have an Azure web app named WebApp1.
You need to provide developers with a copy of WebApp1 that they can modify without affecting the
production WebApp1. When the developers finish testing their changes, you must be able to switch
the current line version of WebApp1 to the new version.
Which command should you run prepare the environment? To answer, select the appropriate options
in the answer are
a.
Answer:
Explanation:
Box 1: New-AzureRmWebAppSlot
The New-AzureRmWebAppSlot cmdlet creates an Azure Web App Slot in a given a resource group
that uses the specified App Service plan and data center.
Box 2: -SourceWebApp
References:
https://docs.microsoft.com/en-us/powershell/module/azurerm.websites/new-azurermwebappslot
Question: 145
You have an Azure App Service plan that hosts an Azure App Service named App1.
You configure one production slot and four staging slots for App1.
You need to allocate 10 percent of the traffic to each staging slot and 60 percent of
the traffic to the production slot.
What should you add to Appl1?
A. slots to the Testing in production blade

B. a performance test
C. a WebJob
D. templates to the Automation script blade
Answer: A
Explanation:
Besides swapping, deployment slots offer another killer feature: testing in production. Just like the
name suggests, using this, you can actually test in production. This means that you can route a
specific percentage of user traffic to one or more of your deployment slots.
Example:
References:
https://stackify.com/azure-deployment-slots/
Question: 146
You have an Azure Service Bus.

You need to implement a Service Bus queue that guarantees first in first-out (FIFO)
delivery of messages.
What should you do?
A. Set the Lock Duration setting to 10 seconds.

B. Enable duplicate detection.
C. Set the Max Size setting of the queue to 5 GB.
D. Enable partitioning.
E. Enable sessions.
Answer: E
Explanation:
Through the use of messaging sessions you can guarantee ordering of messages, that is first-in-first-
out (FIFO) delivery of messages.
References:
https://docs.microsoft.com/en-us/azure/service-bus-messaging/service-bus-azure-and-service-bus-
queues-compared-contrasted
Question: 147
You have a Microsoft SQL Server Always On availability group on Azure virtual
machines. You need to configure an Azure internal load balancer as a listener for
the availability group. What should you do?
A. Enable Floating IP.

B. Set Session persistence to Client IP and protocol.
C. Set Session persistence to Client IP.
D. Create an HTTP health probe on port 1433.
Answer: A
Explanation:
Incorrect Answers:
D: The Health probe is created with the TCP protocol, not with the HTTP protocol.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/sql/virtual-machines-windows-
portal-sql-alwayson-int-listener
Question: 148
correct solution.
You manage a virtual network named VNet1 that is hosted in the West US Azure region.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Azure Network Watcher, you create a connection monitor.
A. Yes
B. No
Answer: A
Explanation:
Azure Network Watcher provides tools to monitor, diagnose, view metrics, and enable or disable logs
for resources in an Azure virtual network.
The connection monitor capability monitors communication at a regular interval and informs you of
reachability, latency, and network topology changes between the VM and the endpoint.
References:
Question: 149

Users access the resources in the subscription from either home or from customer sites. From home,
users must establish a point-to-site VPN to access the Azure resources. The users on the customer
sites access the Azure resources by using site-to-site VPNs.
You have a line-of-business app named App1 that runs on several Azure virtual machine. The virtual
machines run Windows Server 2016.
You need to ensure that the connections to App1 are spread across all the virtual machines.
What are two possible Azure services that you can use? Each correct answer presents a complete
solution.
A. a public load balancer

B. Traffic Manager
C. an Azure Content Delivery Network (CDN)
D. an internal load balancer
E. an Azure Application Gateway
Answer: DE
Question: 150
DRAG DROP
You have an on-premises network that you plan to connect to Azure by using a site-to-site VPN.
In Azure, you have an Azure virtual network named VNet1 that uses an address space of 10.0.0.0/16.
VNet1 contains a subnet named Subnet1 that uses an address space of 10.0.0.0/24.
You need to create a site-to-site VPN to Azure.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct
orders you select.
Answer:
Explanation:
Note: More than one order of answer choices is correct.
Creating a local gateway (a logical object that represents the on-premise router) can be done at step
1, step 2 or step 3. The other three steps must be done in order: create gateway subnet then create
VPN gateway then create the VPN connection. The VPN connection is a connection between the
VPN gateway and the Local gateway.
Question: 151
DRAG DROP
You have an Azure subscription that contains the following resources:
• a virtual network named VNet1
• a replication policy named ReplPolicy1
• a Recovery Services vault named Vault1
• an Azure Storage account named Storage1
You have an Amazon Web Services (AWS) EC2 virtual machine named VM1 that
runs Windows Server
You need to migrate VM1 to VNet1 by using Azure Site Recovery.
Which three actions should you perform in sequence? To answer, move the
appropriate actions from the list of actions to the answer area and arrange them in
the correct order.
Answer:
Explanation:
Step 1: Deploy an EC2 virtual machine as a configuration server
Prepare source include:
1. Use an EC2 instance that's running Windows Server 2012 R2 to create a configuration server and
register it with your recovery vault.
2. Configure the proxy on the EC2 instance VM you're using as the configuration server so that it can
access the service URLs.
Step 2: Install Azure Site Recovery Unified Setup.
Download Microsoft Azure Site Recovery Unified Setup. You can download it to your local machine
and then copy it to the VM you're using as the configuration server.
Step 3: Enable replication for VM1.
Enable replication for each VM that you want to migrate. When replication is enabled, Site Recovery
automatically installs the Mobility service.
References:
https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-aws-azure
Question: 152
You have an on-premises network that contains a Hyper-V host named Host1. Host1
runs Windows Server 2016 and hosts 10 virtual machines that run Windows Server
2016.
You plan to replicate the virtual machines to Azure by using Azure Site Recovery.
You create a Recovery Services vault named ASR1 and a Hyper-V site named
Site1.
You need to add Host1 to ASR1.
What should you do?
A. Download the installation file for the Azure Site Recovery Provider.
Download the vault registration key.
Install the Azure Site Recovery Provider on Host1 and register the server.
B. Download the installation file for the Azure Site Recovery Provider.
Download the storage account key.
Install the Azure Site Recovery Provider on Host1 and register the server.
C. Download the installation file for the Azure Site Recovery Provider.
Download the vault registration key.
Install the Azure Site Recovery Provider on each virtual machine and register the virtual machines.
D. Download the installation file for the Azure Site Recovery Provider.
Download the storage account key.
Install the Azure Site Recovery Provider on each virtual machine and register the virtual machines.
Answer: A
Explanation:
Download the Vault registration key. You need this when you install the Provider. The key is valid for
five days after you generate it.
Install the Provider on each VMM server. You don't need to explicitly install anything on Hyper-V
hosts.
Incorrect Answers:
B, D: Use the Vault Registration Key, not the storage account key.
References:
https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-premises-azure
Question: 153
You plan to move services from your on-premises network to Azure.

You identify several virtual machines that you believe can be hosted in Azure. The virtual machines
are shown in the following table.
Which two virtual machines can you access by using Azure migrate? Each correct answer presents a
complete solution.
A. Sea-CA0l
B. Hou-NW01
C. NYC-FS01
D. Sea-DC01
E. BOS-DB01
Answer: CE
Question: 154
DRAG DROP
You create an Azure Migrate project named TestMig in a resource group named
test-migration.
You need to discover which on-premises virtual machines to assess for migration.
Which three actions should you perform in sequence? To answer, move the
appropriate actions from the list of actions to the answer area and arrange them in
the correct order.
Answer:
Explanation:
Step 1: Download the OVA file for the collection appliance
Azure Migrate uses an on-premises VM called the collector appliance, to discover information about
your on-premises machines. To create the appliance, you download a setup file in Open Virtualization
Appliance (.ova) format, and import it as a VM on your on-premises vCenter Server.
Step 2: Create a migration group in the project
For the purposes of assessment, you gather the discovered VMs into groups. For example, you might
group VMs that run the same application. For more precise grouping, you can use dependency
visualization to view dependencies of a specific machine, or for all machines in a group and refine the
group.
Step 3: Create an assessment in the project
After a group is defined, you create an assessment for it.
References:
https://docs.microsoft.com/en-us/azure/migrate/migrate-overview
Question: 155
HOTSPOT

You have a virtualization environment that contains the virtualization servers in the following table.
The virtual machines are configured as shown in the following table.
All the virtual machines use basic disks. VM1 is protected by using BitLocker Drive Encryption
(BitLocker).
You plan to use Azure Site Recovery to migrate the virtual machines to Azure.
Which virtual machines can you migrate? To answer, select the appropriate options in the answer are
a.
Answer:
References:
https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-support-matrix#azure-vm-
requirements
Question: 156
HOTSPOT
Your company has offices in New York and Los Angeles.
You have an Azure subscription that contains an Azure virtual network named VNet1. Each office has
a site-to-site VPN connection to VNet1.
Each network uses the address spaces shown in the following table.
You need to ensure that all Internet-bound traffic from VNet1 is routed through the New York office.
a.
Answer:
Explanation:
Box 1: Set-AzureRmVirtualNetworkGatewayDefaultSite
The Set-AzureRmVirtualNetworkGatewayDefaultSite cmdlet assigns a forced tunneling default site to
a virtual network gateway. Forced tunneling provides a way for you to redirect Internet-bound traffic
from Azure virtual machines to your on-premises network; this enables you to inspect and audit traffic
before releasing it. Forced tunneling is carried out by using a virtual private network (VPN) tunnel; this
tunnel requires a default site, a local gateway where all the Azure Internet-bound traffic is redirected.
Set-AzureRmVirtualNetworkGatewayDefaultSite provides a way to change the default site assigned
to a gateway.
Incorrect Answers:
Not: New-AzureRmVirtualNetworkGatewayConnection
This command creates the Site-to-Site VPN connection between the virtual network gateway and the
on-prem VPN device. We already have Site-to-Site VPN connections.
Box 2: 192.168.0.0/20
Specify the VNET1 address.
Explanation:
Incorrect Answers:
Not: New-AzureRmVirtualNetworkGatewayConnection
This command creates the Site-to-Site VPN connection between the virtual network gateway and the
on-prem VPN device. We already have Site-to-Site VPN connections.
Box 2: 192.168.0.0/20
Specify the VNET1 address.
References:
https://docs.microsoft.com/en-us/powershell/module/azurerm.network/set-
azurermvirtualnetworkgatewaydefaultsite
Question: 157
You have an Azure subscription that contains a virtual network named VNet1. VNet 1 has two
subnets named Subnet1 and Subnet2. VNet1 is in the West Europe Azure region.
The subscription contains the virtual machines in the following table.
You need to deploy an application gateway named AppGW1 to VNet1.

A. Add a service endpoint.
B. Add a virtual network.
C. Move VM3 to Subnet1.
D. Stop VM1 and VM2.
Answer: D
Explanation:
If you have an existing virtual network, either select an existing empty subnet or create a new subnet
in your existing virtual network solely for use by the application gateway.
Verify that you have a working virtual network with a valid subnet. Make sure that no virtual machines
or cloud deployments are using the subnet. The application gateway must be by itself in a virtual
network subnet.
References:
https://social.msdn.microsoft.com/Forums/azure/en-US/b09367f9-5d01-4cda-9127-
b7a506a0a151/cant-create-application-gateway?forum=WAVirtualMachinesVirtualNetwork
https://docs.microsoft.com/en-us/azure/application-gateway/application-gateway-create-gateway
Question: 158
HOTSPOT
You have an Azure virtual network named VNet1 that connects to your on-premises network by using
a site-to-site VPN. VMet1 contains one subnet named Subnet1.
Subnet1 is associated to a network security group (NSG) named NSG1. Subnet1 contains a basic
internal load balancer named ILB1. ILB1 has three Azure virtual machines in the backend pool.
You need to collect data about the IP addresses that connects to ILB1. You must be able to run
interactive queries from the Azure portal against the collected dat
a.
What should you do? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
Box 1: An Azure Log Analytics workspace
In the Azure portal you can set up a Log Analytics workspace, which is a unique Log Analytics
environment with its own data repository, data sources, and solutions
Box 2: ILB1
References:
https://docs.microsoft.com/en-us/azure/log-analytics/log-analytics-quick-create-workspace
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-diagnostics
Question: 159
HOTSPOT
You have an Azure subscription named Subscription1 that contains the resources in the following
table.
VM1 and VM2 run the websites in the following table.
AppGW1 has the backend pools in the following table.
DNS resolves site1.contoso.com, site2.contoso.com, and site3.contoso.com to the IP address of

AppGW1.
AppGW1 has the listeners in the following table.
AppGW1 has the rules in the following table.
Answer:
Explanation:
Vm1 is in Pool1. Rule2 applies to Pool1, Listener 2, and site2.contoso.com
Question: 160
HOTSPOT
You have an on-premises data center and an Azure subscription. The data center contains two VPN
devices. The subscription contains an Azure virtual network named VNet1. VNet1 contains a gateway
subnet.
You need to create a site-to-site VPN. The solution must ensure that is a single instance of an Azure
VPN gateway fails, or a single on-premises VPN device fails, the failure will not cause an interruption
that is longer than two minutes.
What is the minimum number of public IP addresses, virtual network gateways, and local network
gateways required in Azure? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
Box 1: 4
Two public IP addresses in the on-premises data center, and two public IP addresses in the VNET.
The most reliable option is to combine the active-active gateways on both your network and Azure, as
shown in the diagram below.
Box 2: 2
Every Azure VPN gateway consists of two instances in an active-standby configuration. For any
planned maintenance or unplanned disruption that happens to the active instance, the standby
instance would take over (failover) automatically, and resume the S2S VPN or VNet-to-VNet
connections.
Box 3: 2
Dual-redundancy: active-active VPN gateways for both Azure and on-premises networks
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-highlyavailable
Question: 161
You have an Azure virtual network named VNet1 that contains a subnet named
Subnet1. Subnet1 contains three Azure virtual machines. Each virtual machine has
a public IP address.
The virtual machines host several applications that are accessible over port 443 to
user on the Internet.
Your on-premises network has a site-to-site VPN connection to VNet1.
You discover that the virtual machines can be accessed by using the Remote
Desktop Protocol (RDP) from the Internet and from the on-premises network.
You need to prevent RDP access to the virtual machines from the Internet, unless
the RDP connection is established from the on-premises network. The solution must
ensure that all the applications can still be accesses by the Internet users.
What should you do?
A. Modify the address space of the local network gateway.
B. Remove the public IP addresses from the virtual machines.
C. Modify the address space of Subnet1.
D. Create a deny rule in a network security group (NSG) that is linked to Subnet1.
Answer: D
Explanation:
You can filter network traffic to and from Azure resources in an Azure virtual network with a network
security group. A network security group contains security rules that allow or deny inbound network
traffic to, or outbound network traffic from, several types of Azure resources.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview
Question: 162
You have a public load balancer that balancer ports 80 and 443 across three virtual
machines.
You need to direct all the Remote Desktop protocol (RDP) to VM3 only.
A. an inbound NAT rule
B. a load public balancing rule
C. a new public load balancer for VM3
D. a new IP configuration
Answer: A
Explanation:
To port forward traffic to a specific port on specific VMs use an inbound network address translation
(NAT) rule.
Incorrect Answers:
B: Load-balancing rule to distribute traffic that arrives at frontend to backend pool instances.
References:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview
Question: 163
You have an azure subscription that contain a virtual named VNet1. VNet1. contains
four subnets named Gatesway, perimeter, NVA, and production.
The NVA contain two network virtual appliance (NVAs) that will network traffic
inspection between the perimeter subnet and the production subnet.
You need o implement an Azure load balancer for the NVAs. The solution must meet
the following requirements:
The NVAs must run in an active-active configuration that uses automatic failover.
The NVA must load balance traffic to two services on the Production subnet. The
services have different IP addresses
Which three actions should you perform? Each correct answer presents parts of the
solution.
A. Add two load balancing rules that have HA Ports enabled and Floating IP
disabled.
B. Deploy a standard load balancer.
C. Add a frontend IP configuration, two backend pools, and a health prob.
D. Add a frontend IP configuration, a backend pool, and a health probe.
E. Add two load balancing rules that have HA Ports and Floating IP enabled.
F. Deploy a basic load balancer.
Answer: BCE
Explanation:
A standard load balancer is required for the HA ports.
-Two backend pools are needed as there are two services with different IP addresses.
-Floating IP rule is used where backend ports are reused.
Incorrect Answers:
F: HA Ports are not available for the basic load balancer.
References:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-overview
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-multivip-overview
Question: 164
You have five Azure virtual machines that run Windows Server 2016.
You have an Azure load balancer named LB1 that provides load balancing se
You need to ensure that visitors are serviced by the same web server for each
request.
A. Floating IP (direct server return) to Disable
B. Session persistence to Client IP
C. a health probe
D. Session persistence to None
Answer: B
Explanation:
You can set the sticky session in load balancer rules with setting the session persistence as the client
IP.
References:
https://cloudopszone.com/configure-azure-load-balancer-for-sticky-sessions/
Question: 165
You have an Azure subscription that contains a policy-based virtual network gateway
named GW1 and a virtual network named VNet1. You need to ensure that you can
configure a point-to-site connection from VNet1 to an on-premises computer. Which
two actions should you perform? Each correct answer presents part of the solution.
A. Reset GW1.
B. Add a service endpoint to VNet1.
C. Add a connection to GW1.
D. Add a public IP address space to VNet1.
E. Delete GWL
F. Create a route-based virtual network gateway.
Answer: EF
Explanation:
E: Policy-based VPN devices use the combinations of prefixes from both networks to define how
traffic is encrypted/decrypted through IPsec tunnels. It is typically built on firewall devices that perform
packet filtering. IPsec tunnel encryption and decryption are added to the packet filtering and
processing engine.
F: A VPN gateway is used when creating a VPN connection to your on-premises network.
Route-based VPN devices use any-to-any (wildcard) traffic selectors, and let routing/forwarding tables
direct traffic to different IPsec tunnels. It is typically built on router platforms where each IPsec tunnel
is modeled as a network interface or VTI (virtual tunnel interface).
Incorrect Answers:
D: Point-to-Site connections do not require a VPN device or a public-facing IP address.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/create-routebased-vpn-gateway-portal
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-connect-multiple-policybased-rm-
ps
Question: 166
correct solution.
You have an Azure web app named App1. App1 runs in an Azure App Service plan named Plan1.
Plan1 is associated to the Free pricing tier.
Solution: You add a continuous WebJob to App1.
A. Yes
B. No
Answer: B
Question: 167
You have an Azure Logic App named App1. App1 provides a response when an HTTP POST request
or an HTTP GET request is received.
During peak periods, App1 is expected to receive up to 200,000 requests in a five-minute period.
You need to ensure that App1 can handle the expected load.
A. Access control (IAM)

B. API connections
C. Workflow settings
D. Access keys
Answer: C
References:
https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-limits-and-config#throughput-limits
Question: 168
DRAG DROP
You have an on-premises network that includes a Microsoft SQL Server instance named SQL1.
You create an Azure Logic App named App1.
You need to ensure that App1 can query a database on SQL1.
Answer:
To access data sources on premises from your logic apps, you can create a data gateway resource in
Azure so that your logic apps can use the on-premises connectors.
Box 1: From an on-premises computer, install an on-premises data gateway.
Before you can connect to on-premises data sources from Azure Logic Apps, download and install
the on-premises data gateway on a local computer.
Box 2: From the Azure portal, create an on-premises data gateway
Create Azure resource for gateway
After you install the gateway on a local computer, you can then create an Azure resource for your
gateway. This step also associates your gateway resource with your Azure subscription.
1. Sign in to the Azure portal. Make sure you use the same Azure work or school email address used
to install the gateway.
2. On the main Azure menu, select Create a resource > Integration > On-premises data gateway.
3. On the Create connection gateway page, provide this information for your gateway resource.
4. To add the gateway resource to your Azure dashboard, select Pin to dashboard. When you're
done, choose Create.
Box 3: From the Logic Apps Designer in the Azure portal, add a connector
After you create your gateway resource and associate your Azure subscription with this resource, you
can now create a connection between your logic app and your on-premises data source by using the
gateway.
5. In the Azure portal, create or open your logic app in the Logic App Designer.
6. Add a connector that supports on-premises connections, for example, SQL Server.
7. Set up your connection.
References:
https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-gateway-connection
Question: 169
You have a Basic App Service plan named ASP1 that hosts an Azure App Service named App1.
You need to configure a custom domain and enable backups for App1.
A. Configure a WebJob for App1.

B. Scale up ASP1.
C. Scale out ASP1.

D. Configure the application settings for App1.
Answer: D
Question: 170
You have an Azure App Service plan named AdatumASP1 that hosts several Azure web apps.
You discover that the web apps respond slowly.
You need to provide additional memory and CPU resources to each instance of the web app.
What should you do?
A. Scale out AdatumASP1.

B. Add continuous WebJobs that use the multi-instance scale.
C. Scale up AdatumASP1.
D. Add a virtual machine scale set.
Answer: C
References:
https://github.com/MicrosoftDocs/azure-docs/blob/master/articles/app-service/web-sites-scale.md
Question: 171
HOTSPOT
You have an Azure web app named App1 that has two deployment slots named Production and
Staging. Each slot has the unique settings shown in the following table.
You perform a slot swap.

What are the configurations of the Production slot after the swap? To answer, select the appropriate
options in the answer are
a.
NOTE: Each correction is worth one point.
Answer:
Explanation:
Swapping the slots means the destination slot website URL will run source slot code with destination
slot settings.
Question: 172
HOTSPOT
In Subscription1, you create an Azure web app named WebApp1. WebApp1 will access an external
service that requires certificate authentication.
You plan to require the use of HTTPS to access WebApp1.
You need to upload certificates to WebApp1.
In which formats should you upload the certificate? To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
A PFX file contains the public key file (SSL Certificate) and its unique private key file. This is required
for HTTPS access. The web app will distribute the public key (in a CER file) to clients that connect to
the web app.
The CER file is an SSL Certificate which has the public key of the external service. The external
service will have the private key associated with the public key contained in the CER file.
Question: 173
You have an Azure web app named App1 that streams video content to users. App1 is located in the
East US Azure region.
Users in North America stream the video content without any interruption.
Users in Asia and Europe report that the video buffer often and do not play back smoothly.
You need to recommend a solution to improve video streaming to the European and Asian users.
What should you recommend?
A. Scale out the App Service plan.

B. Scale up the App Service plan.
C. Configure an Azure Content Delivery Network (CDN) endpoint.
D. Configure Azure File Sync.
Answer: C
Question: 174
You have an Azure subscription named Subscription1 that contains an Azure virtual network named
VNet1. VNet1 connects to your on-premises network by using Azure ExpressRoute.
You need to connect VNet1 to the on-premises network by using a site-to-site VPN. The solution
must minimize cost.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Create a local site VPN gateway.

B. Create a VPN gateway that uses the VpnGwl SKU.
C. Create a VPN gateway that uses the Basic SKU.
D. Create a gateway subnet.
E. Create a connection.
Answer: ABE
Explanation:
For a site to site VPN, you need a local gateway, a gateway subnet, a VPN gateway, and a
connection to connect the local gateway and the VPN gateway. That would be four answers in this
question. However, the question states that VNet1 connects to your on-premises network by using
Azure ExpressRoute. For an ExpressRoute connection, VNET1 must already be configured with a
gateway subnet so we don’t need another one.
Question: 175
You have an Azure subscription named Subscription1 that contains two Azure virtual networks named
VNet1 and VNet2. VNet1 contains a VPN gateway named VPNGW1 that uses static routing. There is
a site-to-site VPN connection between your on-premises network and VNet1.
On a computer named Client1 that runs Windows10, you configure a point-to-site VPN connection to
VNet1.
You configure virtual network peering between VNet1 and VNet2. You verify that you can connect to
VNet2 from the on-premises network. Client1 is unable to connect to VNet2.
You need to ensure that you can connect Client1 to VNet2.
What should you do?
A. Select Allow gateway transit on VNet2.

B. Enable BGP on VPNGW1.
C. Select Allow gateway transit on VNet1.
D. Download and re-install the VPN client configuration package on Client1.
Answer: D
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-point-to-site-routing
Question: 176
You are troubleshooting a performance issue for an Azure Application Gateway.

You need to compare the total requests to the failed requests during the past six hours.
A. Metrics in Application Gateway

B. Diagnostics logs in Application Gateway
C. NSG flow logs in Azure Network Watcher
D. Connection monitor in Azure Network Watcher
Answer: A
Explanation:
Application Gateway currently has seven metrics to view performance counters.
Metrics are a feature for certain Azure resources where you can view performance counters in the
portal. For
Application Gateway, the following metrics are available:
 Total Requests
 Failed Requests
 Current Connections
 Healthy Host Count
 Response Status
 Throughput
 Unhealthy Host count
You can filter on a per backend pool basis to show healthy/unhealthy hosts in a specific backend pool
References: https://docs.microsoft.com/en-us/azure/application-gateway/application-
gatewaydiagnostics#
Metrics
Question: 177
HOTSPOT
You are creating an Azure load balancer.
You need to add an IPv6 load balancing rule to the load balancer.
How should you complete the Azure PowerShell script? To answer, select the appropriate options in
the answer are
a.
Answer:
References:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-ipv6-internet-ps
Question: 178
You have two Azure virtual networks named VNet1 and VNet2. VNet1 contains an Azure virtual
machine named VM1. VNet2 contains an Azure virtual machine named VM2.
VM1 hosts a frontend application that connects to VM2 to retrieve dat
a.
Users report that the frontend application is slower than usual.
You need to view the average round-trip time (RTT) of the packets from VM1 to VM2.
Which Azure Network Watcher feature should you use?
A. NSG flow logs
B. Connection troubleshoot
C. IP flow verify
D. Connection monitor
Answer: D
Explanation:
The Connection Monitor feature in Azure Network Watcher is now generally available in all public
regions. Connection Monitor provides you RTT values on a per-minute granularity. You can monitor a
direct TCP connection from a virtual machine to a virtual machine, FQDN, URI, or IPv4 address.
References:
https://azure.microsoft.com/en-us/updates/general-availability-azure-network-watcher-connection-
monitor-in-all-public-regions/
Question: 179
HOTSPOT
You have an Azure virtual machine named VM1 that connects to a virtual network named VNet1.
VM1 has the following configurations:
 Subnet: 10.0.0.0/24
 Availability set: AVSet
 Network security group (NSG): None
 Private IP address: 10.0.0.4 (dynamic)
 Public IP address: 40.90.219.6 (dynamic)
You deploy a standard, Internet-facing load balancer named slb1.
You need to configure slb1 to allow connectivity to VM1.
Which changes should you apply to VM1 as you configure slb1? To answer, select the appropriate
options in the answer are
a.
Answer:
Question: 180
You deploy an Azure Application Gateway.

You need to ensure that all the traffic requesting https://adatum.com/internal resources is directed to
an internal server pool and all the traffic requesting https://adatum.com/external resources is directed
to an external server pool.
What should you configure on the Application Gateway?
A. URL path-based routing

B. multi-site listeners
C. basic routing
D. SSL termination
Answer: A
Question: 181
From the MFA Server blade, you open the Block/unblock users blade as shown in the exhibit.
What caused AlexW to be blocked?
A. An administrator manually blocked the user.
B. The user reports a fraud alert when prompted for additional authentication.
C. The user account password expired.
D. The user entered an incorrect PIN four times within 10 minutes.
Answer: B
Question: 182
You are the global administrator for an Azure Active Directory (Azure AD) tenant named
adatum.com. From the Azure Active Directory blade, you assign the Conditional Access Administrator
role to a user You need to ensure that Admin1 has just-in-time access as a conditional access
administrator.
What should you do next?
A. Enable Azure AD Multi-Factor Authentication (MFA).
B. Set Admin1 as Eligible for the Privileged Role Administrator role.
C. Admin1 as Eligible for the Conditional Access Administrator role.
D. Enable Azure AD Identity Protection.
Answer: A
Explanation:
Require MFA for admins is a baseline policy that requires MFA for the following directory roles:
 Global administrator 
 SharePoint administrator 
 Exchange administrator 
 Conditional access administrator 
 Security administrator 
References:
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/baseline-protection
Question: 183
You are the global administrator for an Azure Active Directory (Azure AD) tenet named adatum.com.
You need to enable two-step verification for Azure users.
What should you do?
A. Create a sign-in risk policy in Azure AD Identity Protection
B. Enable Azure AD Privileged Identity Management.
C. Create and configure the Identity Hub.
D. Configure a security policy in Azure Security Center.
Answer: A
Explanation:
With Azure Active Directory Identity Protection, you can:
 require users to register for multi-factor authentication
 handle risky sign-ins and compromised users
References:
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/flows
Question: 184
HOTSPOT
You have an Azure subscription named Subscription1 that contains a virtual network named VNet1.
You add the users in the following table.
Which user can perform each configuration? To answer, select the appropriate options in the answer
are
a.
Answer:
Explanation:
Box 1: User1 and User3 only.
The Owner Role lets you manage everything, including access to resources.
The Network Contributor role lets you manage networks, but not access to them.
Box 2: User1 and User2 only
The Security Admin role: In Security Center only: Can view security policies, view security states, edit
security policies, view alerts and recommendations, dismiss alerts and recommendations.
References:
Question: 185
You have an Azure subscription named Subscnption1 that contains an Azure virtual machine named
VM1. VM1 is in a resource group named RG1.
VM1 runs services that will be used to deploy resources to RG1.
You need to ensure that a service running on VM1 can manage the resources in RG1 by using the
identity of VM1. What should you do fit -
A. From the Azure portal modify the Access control (1AM) settings of VM1.
B. From the Azure portal, modify the Policies settings of RG1.
C. From the Azure portal, modify the value of the Managed Service Identity option for VM1.
D. From the Azure portal, modify the Access control (IAM) settings of RG1.
Answer: C
Explanation:
A managed identity from Azure Active Directory allows your app to easily access other AAD-protected
resources such as Azure Key Vault. The identity is managed by the Azure platform and does not
require you to provision or rotate any secrets.
User assigned managed identities can be used on Virtual Machines and Virtual Machine Scale Sets.
References:
https://docs.microsoft.com/en-us/azure/app-service/app-service-managed-service-identity
Question: 186
You are configuring Azure Active Directory (AD) Privileged Identity Management.
You need to provide a user named Admm1 with read access to a resource group named RG1 for only
one month.
The user role must be assigned immediately.
What should you do?
A. Assign an active role.
B. Assign an eligible role.
C. Assign a permanently active role.
D. Create a custom role and a conditional access policy.
Answer: B
Explanation:
Azure AD Privileged Identity Management introduces the concept of an eligible admin. Eligible admins
should be users that need privileged access now and then, but not all-day, every day. The role is
inactive until the user needs access, then they complete an activation process and become an active
admin for a predetermined amount of time.
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-configure
Question: 187
HOTSPOT
You plan to create a new Azure Active Directory (Azure AD) role.
You need to ensure that the new role can view all the resources in the Azure subscription and issue
support requests to Microsoft. The solution must use the principle of least privilege.
How should you complete the JSON definition? To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
Box 1: "*/read",
*/read lets you view everything, but not make any changes.
Box 2: " Microsoft.Support/*"
The action Microsoft.Support/* enables creating and management of support tickets.
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/tutorial-custom-role-powershell
Question: 188
You have an Azure Active Directory (Azure AD) tenant named Tenant1 and an Azure subscription
named You enable Azure AD Privileged Identity Management.
You need to secure the members of the Lab Creator role. The solution must ensure that the lab
creators request access when they create labs.
A. From Azure AD Privileged Identity Management, edit the role settings for Lab Creator.
B. From Subscription1 edit the members of the Lab Creator role.
C. From Azure AD Identity Protection, creates a user risk policy.
D. From Azure AD Privileged Identity Management, discover the Azure resources of Conscription.
Answer: A
Explanation:
As a Privileged Role Administrator you can:
 Enable approval for specific roles
 Specify approver users and/or groups to approve requests
 View request and approval history for all privileged roles
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-configure
Question: 189
You create an Azure subscription that is associated to a basic Azure Active Directory (Azure AD)
tenant. You need to receive an email notification when any user activates an administrative role.
What should you do?
A. Purchase Azure AD Premium 92 and configure Azure AD Privileged Identity Management,
B. Purchase Enterprise Mobility + Security E3 and configure conditional access policies.
C. Purchase Enterprise Mobility + Security E5 and create a custom alert rule in Azure Security Center.
D. Purchase Azure AD Premium PI and enable Azure AD Identity Protection.
Answer: A
Explanation:
When key events occur in Azure AD Privileged Identity Management (PIM), email notifications are
sent. For example, PIM sends emails for the following events:
 When a privileged role activation is pending approval

 When a privileged role activation request is completed
 When a privileged role is activated
 When a privileged role is assigned
 When Azure AD PIM is enabled
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-
email-notifications
Question: 190
HOTSPOT
You have an Azure Active Directory (Azure AD) tenant that contains three global administrators
named Admin1, Admin2, and Admin3.
The tenant is associated to an Azure subscription. Access control for the subscription is configured as
shown in the Access control exhibit. (Click the Exhibit tab.)
You sign in to the Azure portal as Admin1 and configure the tenant as shown in the Tenant exhibit.
(Click the Exhibit tab.)
Answer:
Question: 191
You have an Azure Active Directory (Azure AD) tenant.
You have an existing Azure AD conditional access policy named Policy1. Policy1 enforces the use of
Azure AD-joined devices when members of the Global Administrators group authenticate to Azure
AD from untrusted locations.
You need to ensure that members of the Global Administrators group will also be forced to use multi-
factor authentication when authenticating from untrusted locations.
What should you do?
A. From the multi-factor authentication page, modify the service settings.
B. From the multi-factor authentication page, modify the user settings.
C. From the Azure portal, modify grant control of Policy1.
D. From the Azure portal, modify session control of Policy1.
Answer: C
Explanation:
There are two types of controls:
 Grant controls – To gate access
 Session controls – To restrict access to a session
Grant controls oversee whether a user can complete authentication and reach the resource that
they’re attempting to sign-in to. If you have multiple controls selected, you can configure whether all
of them are required when your policy is processed. The current implementation of Azure Active
Directory enables you to set the following grant control requirements:
References:
https://blog.lumen21.com/2017/12/15/conditional-access-in-azure-active-directory/
Question: 192
You enable multi-factor authentication for all users.
Some users report that the email applications on their mobile device cannot co browser and from
Microsoft Outlook 2016 on their computer.
You need to ensure that the users can use the email applications on their mobile device.
What should you instruct the users to do?
The users can access Exchange Online by using a web
A. Enable self-service password reset.
B. Create an app password.
C. Reset the Azure Active Directory (Azure AD) password.
D. Reinstall the Microsoft Authenticator app.
Answer: A
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/concept-sspr-howitworks
Question: 193
You have an Azure subscription named Subscription1 and two Azure Active Directory (Azure AD)
tenants named Tenant1 and Tenant2.
Subscnption1 is associated to Tenant1 Multi-factor authentication (MFA) is enabled for all the users
in Tenant1.
You need to enable MFA for the users in Tenant2. The solution must maintain MFA forTenant1.
A. Transfer the administration of Subscription1 to a global administrator of Tenants.
B. Configure the MFA Server setting in Tenant1.
C. Create and link a subscription to Tenant2.
D. Change the directory for Subscription1.
Answer: C
Question: 194
You have an Azure Active Directory (Azure AD) tenant that has Azure AD Privileged Identity
Management configured.
You have 10 users who are assigned the Security Administrator role for the tenant.
You need the users to verify whether they still require the Security Administrator role.
What should you do?
A. From Azure AD Identity Protection, configure a user risk policy.

B. From Azure AD Privileged Identity Management, create an access review.
C. From Azure AD Identity Protection, configure the Weekly Digest.
D. From Azure AD Privileged Identity Management, create a conditional access policy.
Answer: B
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-how-to-
start-security-review
Question: 195
You are the global administrator for an Azure Active Directory (Azure AD) tenant named adatum.com.
You need to enable two-step verification for Azure users.
What should you do?
A. Configure a playbook in Azure AD conditional access policy.

B. Create an Azure AD conditional access policy.
C. Create and configure the Identify Hub.
D. Install and configure Azure AD Connect.
Answer: B
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-mfasettings
Question: 196
You have an Azure subscription named Subcription1 that contains a virtual network named VNet1.
VNet1 is in a resource group named RG1.
Subscription1 has a user named User1. User1 has the following roles:
 Reader
 Security Admin
 Security Reader
You need to ensure that User1 can assign the Reader role for VNet1 to other users.
What should you do?
A. Remove Used from the Security Reader and Reader roles for Subscription"). Assign User1 the
Contributor role for Subcription1.
B. Assign User1 the Owner role for VNet1
C. Remove User1 from the Security Reader and Reader roles for Subscription.
D. Assign User1 the Network Contributor role for VNet1.
Answer: B
References:
Question: 197
HOTSPOT
You enable Azure Active Directory (AD) Privileged Identity Management.
From Azure AD Privileged Identity Management, you configure the Global Administrator role for the
Azure Active Directory (Azure AD) tenant as shown in the Role settings exhibit. (Click the Exhibit
tab.)
From Azure AD Privileged Identity Management, you configure the global administrators as shown in
the Members exhibit. (Click the Exhibit tab.)
User2 activates the Global Administrator role on July 16, 2018, at 10:00, as shown in the Activation
exhibit. (Click the Exhibit tab.)
Answer:
Question: 198
HOTSPOT
You configure the multi-factor authentication status for three users as shown in the following table.
You create a group named Group1 and add Admin1, Admin2, and Admin3 to the group.
For all cloud apps, you create a conditional access policy that includes Group1. The policy requires
multi-factor authentication.
Answer:
Box 1: No
Disabled is the default state for a new user not enrolled in Azure MF
A.
Box 2: Yes
Enforced: The user has been enrolled and has completed the registration process for Azure MFA.
Web browser apps require login in this case.
Box 3: Yes
Enabled: The user has been enrolled in Azure MFA, but has not registered. They receive a prompt to
register the next time they sign in.
Web browser apps require login in this case.
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-userstates
Question: 199
You create an Azure subscription named Subscription1 and an associated Azure Active Directory
(Azure AD) tenant named Tenant1. Tenant1 contains the users in the following table.
You need to add an Azure AD Privileged Identity Management application to Tenant1.

Which account can you use?
A. Admin3@contoso.onmicrosoft.com
B. Admin1@contoso.onmicrosoft.com
C. Admin2@contoso.onmicrosoft.com
D. ContosoAdmin1@hotmail.com
Answer: B
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-getting-
started
Question: 200
HOTSPOT
You have an Azure Migrate project that has the following assessment properties:
 Target location: East US
 Storage redundancy: Locally redundant
 Comfort factor: 2.0
 Performance history: 1 month
 Percentile utilization: 95th
 Pricing tier: Standard
 Offer: Pay as you go
You discover the following two virtual machines:
 A virtual machine named VM1 that runs Windows Server 2016 and has 10 CPU cores at 20
percent utilization
 A virtual machine named VM2 that runs Windows Server 2012 and has four CPU cores at 50
percent utilization
How many CPU cores will Azure Migrate recommend for each virtual machine? To answer, select the
appropriate options in the answer are
a.
Answer:
Explanation:
The equation is: ‘core usage x comfort factor’. The comfort factor is 2.0.
So VM 1 is 10 cores at 20% utilization which equals 2 cores. Multiply that the comfort factor and you
get 4 cores.
VM 2 is 4 cores at 50% utilization which equals 2 cores. Multiply that the comfort factor and you get 4
cores.
Case Study: 1
ADatum Corporation
Overview
ADatum Corporation is a financial company that has two main offices in New York and Los Angeles.
ADatum has a subsidiary named Fabrikam, Inc. that shares the Los Angeles office.
ADatum is conducting an initial deployment of Azure services to host new line-of-business
applications and is preparing to migrate its existing on-premises workloads to Azure.
ADatum uses Microsoft Exchange Online for email.
On-Premises Environment
The on-premises workloads run on virtual machines hosted in a VMware vSphere 6 infrastructure. All
the virtual machines are members of an Active Directory forest named adatum.com and run Windows
Server 2016.
The New York office an IP address of 10.0.0.0/16. The Los Angeles office uses an IP address space
of 10.10.0.0/16.
The offices connect by using a VPN provided by an ISP. Each office has one Azure ExpressRoute
circuit that provides access to Azure services and Microsoft Online Services. Routing is implemented
by using Microsoft peering.
The New York office has a virtual machine named VM1 that has the vSphere console installed.
Azure Environment
You provision the Azure infrastructure by using the Azure portal. The infrastructure contains the
resources shown in the following table.
AG1 has two backend pools named Pool11 and Pool12. AG2 has two backend pools named Pool21
and Pool22.
Planned Changes
ADatum plans to migrate the virtual machines from the New York office to the East US Azure region
by using Azure Site Recovery.
Infrastructure Requirements
ADatum identifies the following infrastructure requirements:
 A new web app named App1 that will access third-parties for credit card processing must be
deployed.
 A newly developed API must be implemented as an Azure function named App2. App2 will
use a blob storage trigger. App2 must process new blobs immediately.
 The Azure infrastructure and the on-premises infrastructure and the on-premises
infrastructure must be prepared for the migration of the VMware virtual machines to Azure.
 The sizes of the Azure virtual machines that will be used to migrate the on-premises
workloads must be identified.
 All migrated and newly deployed Azure virtual machines must be joined to the adatum.com
domain.
 AG1 must load balance incoming traffic in the following manner:
1. http://corporate.adatum.com/video/* will be load balanced across Pool11.
2. http://corporate.adatum.com/images/* will be load balanced across Pool12.
1. http://www.adatum.com will be load balanced across Pool21.
2. http://www.fabrikam.com will be load balanced across Pool22.
 ER1 must route traffic between the New York office and the platform as a service (PaaS)
services in the East US Azure region, as long as ER1 is available.
 ER2 must route traffic between the Los Angeles office and the PaaS sevices in the West US
region, as long as ER2 is available.
 ER1 and ER2 must be configured to fail over automatically.
Application Requirements
App2 must be able to connect directly to the private IP addresses of the Azure virtual machines. App2
will be deployed directly to an Azure virtual network.
Inbound and outbound communications to App1 must be controlled by using NSGs.
Pricing Requirements
ADatum identifies the following pricing requirements:
 The cost of App1 and App2 must be minimized.
 The transactional charges of Azure Storage account must be minimized.
Question: 201
DRAG DROP
You need to prepare the New York office infrastructure for the migration of the on-premises virtual
machines to Azure.
Which four actions you perform in sequence? To answer, move the appropriate actions from the list of
actions to the answer area and arrange them in the correct order.
Answer:
Box 1:
1. From the Azure portal, download the OVF file.
2. In the vCenter Server, import the Collector appliance as a virtual machine using the Deploy OVF
Template wizard.
3. In vSphere Client console, click File > Deploy OVF Template.
4. In the Deploy OVF Template Wizard > Source, specify the location for the .ovf file.
Box 2: From VM1, connect to the collector virtual machine
After you've created the Collector virtual machine, connect to it and run the Collector.
Box 3: From the ASRV1 blade in the Azure portal, select a protection goal.
Box 4: From VM1, register the configuration server.
Register the configuration server in the vault
Scenario: The Azure infrastructure and the on-premises infrastructure and the on-premises
infrastructure must be prepared for the migration of the VMware virtual machines to Azure.
References:
Migrate Your Virtual Machines to Microsoft Azure, Includes guidance for optional data migration,
Proof of Concept guide, September 2017
https://azuremigrate.blob.core.windows.net/publicpreview/Azure%20Migrate%20-
%20Preview%20User%20Guide.pdf
Question: 202
HOTSPOT
You need to provision the resources in Azure to support the virtual machine that will be migrated from
the New York office.
What should you include in the solution? To answer, select the appropriate options in the answer are
a.
Answer:
Box 1: 10.20.0.0/16
Scenario: The New York office an IP address of 10.0.0.0/16. The Los Angeles office uses an IP
address space of 10.10.0.0/16.
Box 2: Storage (general purpose v1)
Scenario: The New York office has a virtual machine named VM1 that has the vSphere console
installed.
Question: 203
HOTSPOT
You need to implement App2 to meet the application? To answer, select the appropriate options in the
answer are
a.
Answer:
Box 1: Standard
Not Shared: A Shared plan does not support Always on.
Box 2: Always on
If your function app is on the Consumption plan, there can be up to a 10-minute delay in processing
new blobs if a function app has gone idle. To avoid this cold-start delay, you can switch to an App
Service plan with Always On enabled, or use a different trigger type.
Scenario: A newly developed API must be implemented as an Azure function named App2. App2 will
App2 must be able to connect directly to the private IP addresses of the Azure virtual machines. App2
will be deployed directly to an Azure virtual network.

The cost of App1 and App2 must be minimized.
References:
https://docs.microsoft.com/en-us/azure/azure-functions/functions-bindings-storage-blob
https://azure.microsoft.com/en-us/pricing/details/app-service/plans/
Question: 204
DRAG DROP
You need to identify the appropriate sizes for the Azure virtual machines.
Which five actions should you perform in sequence? To answer, move the appropriate actions from
Answer:
References:
https://docs.microsoft.com/en-us/azure/migrate/tutorial-assessment-vmware
Question: 205
You need to recommend an environment for the deployment of App1.
A. a new App Service plan that uses the P3v2 pricing tier
B. ASE1 and an App Service plan that uses the I1 pricing tier
C. ASE1 and an App Service plan that uses the I3 pricing tier
D. a new App Service plan that uses the S1 pricing tier
Answer: B
References:
https://docs.microsoft.com/en-us/azure/app-service/environment/app-service-app-service-
environment-control-inbound-traffic
Question: 206
HOTSPOT
You need to implement App2 to meet the application requirements.
What should you include in the implementation? To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
 A newly developed API must be implemented as an Azure function named App2. App2 will
 This requires “Always On”.
 The cost of App1 and App2 must be minimized
 The Standard pricing tier is the cheapest tier that supports Always On.
Question: 207
You need to configure AG1.

What should you create?
A. a multi-site listener
B. a URL path-based routing rule
C. a basic listener
D. a basic routing rule
Answer: B
References:
https://docs.microsoft.com/en-us/azure/application-gateway/application-gateway-create-url-route-
portal
Question: 208
DRAG DROP
You need to configure the Azure ExpressRoute circuits.
How should you configure Azure ExpressRoute routing? To answer, drag the appropriate
configurations to the correct locations. Each configuration may be used once, more than once, or not
at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Question: 209
What should you create to configure AG2?
A. multi-site listeners
B. basic listeners
C. URL path-based routing rules
D. basic routing rules
E. an additional public IP address
Answer: A
Explanation:
- http://www.adatum.com will be load balanced across Pool21.
- http://fabrikam.com will be load balanced across Pool22.
You need to configure an Azure Application Gateway with multi-site listeners to direct different URLs
to different pools.
References:
https://docs.microsoft.com/en-us/azure/application-gateway/multiple-site-overview
Case Study: 2
Lab 2
Overview
This is a lab or performance-based testing (PBT) section.
The following section of the exam is a lab. In this section, you will perform a set of
tasks m a live environment. While most liable to you as it would be m a live
environment, some functionality (e g, copy and paste, ability to having sites) will not
be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other
words, it doesn't matter how you accomplish the lab9s0 and all other sections of the
exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab.
you will NOT be able to return to the tab.
To connect to Azure portal, type https://portal.azure.com in te browser address bar.
Question: 210
You need to create a function app named corp7509086nl that supports sticky
sessions. The solution must minimize the Azure-related costs of the App Service
plan.
Answer: See
explanation
below.
Explanation:
Step 1:
Select the New button found on the upper left-hand corner of the Azure portal, then select Compute >
Function App.
Step 2:
Use the function app settings as listed below.
App name: corp7509086n1
Hosting plan: Azure App Service plan
(need this for the sticky sessions)
Pricing tier of the the App Service plan: Shared compute: Free
Step 3:
Select Create to provision and deploy the function app.
References:
https://docs.microsoft.com/en-us/azure/azure-functions/functions-create-function-app-portal
Question: 211
You need to create a web app named corp7509086n2 that can be scaled
horizontally. The solution must use the lowest possible pricing tier for the App
Service plan.
Answer: See
explanation
below.
Explanation:
Step 1:
In the Azure Portal, click Create a resource > Web + Mobile > Web App.
Step 2:
Use the Webb app settings as listed below.
Web App name: corp7509086n2
Hosting plan: Azure App Service plan
Pricing tier of the Pricing Tier: Standard
Change your hosting plan to Standard, you can't setup auto-scaling below standard tier.
Step 3:
Select Create to provision and deploy the Web app.
References:
https://docs.microsoft.com/en-us/azure/app-service/environment/app-service-web-how-to-create-a-
web-app-in-an-ase
https://azure.microsoft.com/en-us/pricing/details/app-service/plans/
Question: 212
Another administrator reports that she is unable to configure a web app named
corplod7509086n3 to prevent all connections from an IP address of 11.0.0.11.
You need to modify corplod7509086n3 to successfully prevent the connections from
the IP address. The solution must minimize Azure-related costs.
Answer: See
explanation
below.
Explanation:
Step 1:
Find and select application corplod7509086n3:
1. In the Azure portal, on the left navigation panel, click Azure Active Directory.
2. In the Azure Active Directory blade, click Enterprise applications.
Step 2:
To add an IP restriction rule to your app, use the menu to open Network>IP Restrictions and click on
Configure IP Restrictions
Step 3:
Click Add rule
You can click on [+] Add to add a new IP restriction rule. Once you add a rule, it will become effective
immediately.
Step 4:
Add name, IP address of 11.0.0.11, select Deny, and click Add Rule
References:
https://docs.microsoft.com/en-us/azure/app-service/app-service-ip-restrictions
Question: 213
You need to add a deployment slot named staging to an Azure web app named
corplod@lab.LabInstance.Idn4. The solution must meet the following requirements:
When new code is deployed to staging, the code must be swapped automatically to
the production slot. Azure-related costs must be minimized.
Answer: See
explanation
below.
Explanation:
Step 1:
Locate and open the corplod@lab.LabInstance.Idn4 web app.
1. In the Azure portal, on the left navigation panel, click Azure Active Directory.
2. In the Azure Active Directory blade, click Enterprise applications.
Step 2:
Open your app's resource blade and Choose the Deployment slots option, then click Add Slot.
Step 3:
In the Add a slot blade, give the slot a name, and select whether to clone app configuration from
another existing deployment slot. Click the check mark to continue.
The first time you add a slot, you only have two choices: clone configuration from the default slot in
production or not at all.
References:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-staged-publishing
Question: 214
You plan to deploy an application getaway named appgw1015 to load balance IP traffic to the Azure virtual machines
connected to subnet0.
You need to configure a virtual network named VNET1015 to support the planned application
gateway.

Answer: See
explanation
below.
Explanation:
Step 1:
Click Networking, Virtual Network, and select VNET1015.
Step 2:
Click Subnets, and Click +Add on the VNET1015 - Subnets pane that appears.
Step 3:
On the Subnets page, click +Gateway subnet at the top to open the Add subnet page.
Step 4:
Locate subnet0 and add it.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resource-
manager-portal
Question: 215
You need to deploy an application gateway named appgwl015 to meet the following requirements:
Load balance internal IP traffic to the Azure virtual machines connected to subnet0.
Provide a Service Level Agreement (SLA) of 99.99 percent availability for the Azure virtual machines.
Answer: See
explanation
below.
Explanation:
Step 1:
Click New found on the upper left-hand corner of the Azure portal.
Step 2:
Select Networking and then select Application Gateway in the Featured list.
Step 3:
Enter these values for the application gateway:
appgw1015 - for the name of the application gateway.
SKU Size: Standard_V2
The new SKU [Standard_V2] offers autoscaling and other critical performance enhancements.
Step 4:
Accept the default values for the other settings and then click OK.
Step 5:
Click Choose a virtual network, and select subnet0.
References:
https://docs.microsoft.com/en-us/azure/application-gateway/application-gateway-create-gateway-
portal
Question: 216
You need to deploy an Azure load balancer named Ib 1015 to your Azure subscription. The solution must meet the
following requirements:
-Support the load balancing of IP traffic from the Internet to Azure virtual machines connected to
VNET1016 \subnet0.
-Prov.de 4 Service level Agreement (SWJ of 99.99 percent ability for the Azure virtual machines.
-Minimize Azure-related costs.
To complete this task, you do NOT need to wait for the deployment to complete. Once the
deployment start in Azure, you can move to the next task.
Answer: See
explanation
below.
Explanation:
Step 1:
On the top left-hand side of the screen, click Create a resource > Networking > Load Balancer.
Step 2:
In the Create a load balancer page enter these values for the load balancer:
myLoadBalancer - for the name of the load balancer.
Internal - for the type of the load balancer.
Basic - for SKU version.
Microsoft guarantees that apps running in a customer subscription will be available 99.99% of the
time.
VNET1016\subnet0 - for subnet that you choose from the list of existing subnets.
Step 3: Accept the default values for the other settings and click Create to create the load balancer.
Question: 217
You plan to connect a virtual network named VNET1017 to your on-premises network by using both an Azure
ExpressRoute and a site-to-site VPN connection.
You need to prepare the Azure environment for the planned deployment. The solution must
maximize the IP address space available to Azure virtual machines.
What should you do from the Azure portal before you create the ExpressRoute are the VPN gateway?
Answer: See
explanation
below.
Explanation:
We need to create a Gateway subnet
Step 1:
Go to More Services > Virtual Networks
Step 2:
Then click on the VNET1017, and click on subnets. Then click on gateway subnet.
Step 3:
In the next window define the subnet for the gateway and click OK
It is recommended to use /28 or /27 for gateway subnet.

As we want to maximize the IP address space we should use /27.
References:
https://blogs.technet.microsoft.com/canitpro/2017/06/28/step-by-step-configuring-a-site-to-site-vpn-
gateway-between-azure-and-on-premise/
Question: 218
You plan to grant the member of a new Azure AD group named crop 75099086 the right to delegate administrative access
to any resource in the resource group named 7509086.
You need to create the Azure AD group and then to assign the correct to e to the group. The solution
must use the principle of least privilege and minimize the number of role assignments.
Answer: See
explanation
below.
Explanation:
Step 1:
Click Resource groups from the menu of services to access the Resource Groups blade
Step 2:
Click Add (+) to create a new resource group. The Create Resource Group blade appears. Enter
corp7509086 as the Resource group name, and click the Create button.
Step 3:
Select Create.
Your group is created and ready for you to add members.
Now we need to assign a role to this resource group scope.
Step 4:
Choose the newly created Resource group, and Access control (IAM) to see the current list of role
assignments at the resource group scope. Click +Add to open the Add permissions pane.
Step 5:
In the Role drop-down list, select a role Delegate administration, and select Assign access to:
resource group corp7509086
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/role-assignments-portal
https://www.juniper.net/documentation/en_US/vsrx/topics/task/multi-task/security-vsrx-azure-
marketplace-resource-group.html
Case Study: 3
Contoso Case Study
Overview
Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in
Seattle and New York.
The Montreal office has 2,000 employees. The Seattle office has 1,000 employees. The New York
office has 200 employees.
All the resources used by Contoso are hosted on-premises.
Contoso creates a new Azure subscription. The Azure Active Directory (Azure AD) tenant uses a
domain named contoso.onmicrosoft.com. The tenant uses the P1 pricing tier.
Existing Environment
The network contains an Active Directory forest named contoso.com. All domain controllers are
configured as DNS servers and host the contoso.com DNS zone.
Contoso has finance, human resources, sales, research, and information technology departments.
Each department has an organizational unit (OU) that contains all the accounts of that respective
department. All the user accounts have the department attribute set to their respective department.
New users are added frequently.
Contoso.com contains a user named User1.
All the offices connect by using private links.
Contoso has data centers in the Montreal and Seattle offices. Each data center has a firewall that can
be configured as a VPN device.
All infrastructure servers are virtualized. The virtualization environment contains the servers in the
following table.
Contoso uses two web applications named App1 and App2. Each instance on each web application
requires 1GB of memory.
The Azure subscription contains the resources in the following table.
The network security team implements several network security groups (NSGs).
Planned Changes
Contoso plans to implement the following changes:
• Deploy Azure ExpressRoute to the Montreal office.
• Migrate the virtual machines hosted on Server1 and Server2 to Azure.
• Synchronize on-premises Active Directory to Azure Active Directory (Azure AD).
• Migrate App1 and App2 to two Azure web apps named webApp1 and WebApp2.
Technical requirements
Contoso must meet the following technical requirements:
• Ensure that WebApp1 can adjust the number of instances automatically based on
the load and can scale up to five instance*.
• Ensure that VM3 can establish outbound connections over TCP port 8080 to the
applications servers in the Montreal office.
• Ensure that routing information is exchanged automatically between Azure and

the routers in the Montreal office.
• Enable Azure Multi-Factor Authentication (MFA) for the users in the finance
department only.
• Ensure that webapp2.azurewebsites.net can be accessed by using the name

app2.contoso.com.
• Connect the New Your office to VNet1 over the Internet by using an encrypted
connection.
• Create a workflow to send an email message when the settings of VM4 are
modified.
• Cre3te a custom Azure role named Role1 that is based on the Reader role.
• Minimize costs whenever possible.
Question: 219
You discover that VM3 does NOT meet the technical requirements.
You need to verify whether the issue relates to the NSGs.
A. Diagram in VNet1
B. the security recommendations in Azure Advisor
C. Diagnostic settings in Azure Monitor
D. Diagnose and solve problems in Traffic Manager Profiles
E. IP flow verify in Azure Network Watcher
Answer: E
Explanation:
Scenario: Contoso must meet technical requirements including:
Ensure that VM3 can establish outbound connections over TCP port 8080 to the applications servers
in the Montreal office.
IP flow verify checks if a packet is allowed or denied to or from a virtual machine. The information
consists of direction, protocol, local IP, remote IP, local port, and remote port. If the packet is denied
by a security group, the name of the rule that denied the packet is returned. While any source or
destination IP can be chosen, IP flow verify helps administrators quickly diagnose connectivity issues
from or to the internet and from or to the on-premises environment.
References:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-ip-flow-verify-overview
Question: 220
You need to meet the technical requirement for VM4.
What should you create and configure?
A. an Azure Notification Hub
B. an Azure Event Hub
C. an Azure Logic App
D. an Azure services Bus
Answer: B
Explanation:
Scenario: Create a workflow to send an email message when the settings of VM4 are modified.
You can start an automated logic app workflow when specific events happen in Azure resources or
third-party resources. These resources can publish those events to an Azure event grid. In turn, the
event grid pushes those events to subscribers that have queues, webhooks, or event hubs as
endpoints. As a subscriber, your logic app can wait for those events from the event grid before
running automated workflows to perform tasks - without you writing any code.
References:
https://docs.microsoft.com/en-us/azure/event-grid/monitor-virtual-machine-changes-event-grid-logic-
app
Question: 221
You need to recommend a solution to automate the configuration for the finance
department users. The solution must meet the technical requirements.
What should you include in the recommended?
A. Azure AP B2C
B. Azure AD Identity Protection
C. an Azure logic app and the Microsoft Identity Management (MIM) client
D. dynamic groups and conditional access policies
Answer: D
Explanation:
Scenario: Ensure Azure Multi-Factor Authentication (MFA) for the users in the finance department
only.
The recommendation is to use conditional access policies that can then be targeted to groups of
users, specific applications, or other conditions.
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-userstates
Question: 222
HOTSPOT
You need to the appropriate sizes for the Azure virtual for Server2.
a.
Answer:
Explanation:
Box 1: Create a Recovery Services vault
Create a Recovery Services vault on the Azure Portal.
Box 2: Install the Azure Site Recovery Provider
Azure Site Recovery can be used to manage migration of on-premises machines to Azure.
Scenario: Migrate the virtual machines hosted on Server1 and Server2 to Azure.
Server2 has the Hyper-V host role.
References:
https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-premises-azure
Case Study: 4
Lab 1
SIMULATION
by design.
the time provided.
Please, note that once you submit your work by clicking the Next button within a lab, you will NOT be
To start the lab
You may start lab by clicking the Next button
Tasks
Click to expand each objective
To connect to the Azure portal, type https:/portal.azure.com in the browser address bar.
Instructions
Performance Based Lab
This type of question asks you to perform tasks in a virtual environment.
The screen for this type of question includes a virtual machine window and a tasks pane.
The window is a remotely connected live environment where you perform tasks on real software and
applications.
On the right is a Tasks pane that lists the tasks you need to perform in the lab. Each task can be
expanded or collapsed using the “+” or “-” symbols. A checkbox is provided for each task. This is
provided for convenience, so you can mark each task as you complete it.
Tasks
Click to expand each objective
-Configure servers
Add the “Print and Document Services” role to server LON-SVR1, installing any required
management features and enabling both Print and LPD Services.
+Configure file and share access
Comments
Once the exam completes, the comment period will begin and you will have the opportunity to provide
comments to Microsoft about the exam questions. To launch the comment period, click the “Finish”
and then “Comment” buttons. To skip the comment period and the exam, click Exit.
You can navigate to a question from the Review screen to provide a comment. Please, see the
Review Screen tab in the Review Screen help Menu (which can be accessed from the Review
Screen) for details on accessing questions from the Review Screen.
To comment on a question, navigate to that question and click the Give Feedback icon. When you
have entered your comment in the comment window, click Submit to close the window. To navigate to
the Review screen again, click the Review button. You may navigate through all questions using the
Next and Previous buttons. To skip commenting, go to the Review Screen by selecting the Review
Screen button in the upper left-hand corner and from the Review Screen, select “Finished”.
Controls Available
For any question, one or more of the following controls might be available.
Keyboard Shortcuts Available

Exam features may be accessed using keyboard shortcuts. The following table describes the
keyboard shortcuts that are available during this exam.
Some keyboard shortcuts require that you press two or more keys at the same time. These keys are
separated by a plus sign (+) in the table below.
Question: 223
You need to prevent remote users from publishing via FTP to a function app named
FunctionApplod7509087f
a. Remote users must be able to publish via FTPS.
Answer: See
explanation
below.
Explanation:
Step 1:
Locate and select the function app FunctionApplod7509087fa.
Step 2:
Select Application Settings > FTP Access, change FTP access to FTPS Only, and click Save.
References:
https://blogs.msdn.microsoft.com/appserviceteam/2018/05/08/web-apps-making-changes-to-ftp-
deployments/
Question: 224
You plan to support many connections to your company's automatically uses up to

five instances when CPU utilization on the instances exceeds 70 percent for 10
minutes. When CPU utilization decreases, the solution must automatically reduce
the number of instances.

Answer: See
explanation
below.
Explanation:
Step 1:
Locate the Homepage App Service plan
Step 2:
Click Add a rule, and enter the appropriate fields, such as below, and the click Add.
Time aggregation: average
Metric Name: Percentage CPU
Operator: Greater than
Threshold 70
Duration: 10 minutes
Operation: Increase count by
Instance count: 4
Step 3:
We must add a scale in rule as well. Click Add a rule, and enter the appropriate fields, such as below,
then click Add.
Operator: Less than
Threshold 70
Duration: 10 minutes
Operation: Decrease count by
Instance count: 4
References:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-
autoscale-portal
https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/insights-autoscale-best-practices
Question: 225
You recently deployed a web app named homepagelod7509087.
You need to back up the code used for the web app and to store the code in the
homepagelod7509Q87 storage account. The solution must ensure that a new
backup is created daily.
Answer: See
explanation
below.
Explanation:
Step 1:
Locate and select the web app homepagelod7509087, select Backups. The Backups page is
displayed.
Step 2:
In the Backup page, Click Configure.
Step 3:
In the Backup Configuration page, click Storage: Not configured to configure a storage account.
Step 4:
Choose your backup destination by selecting a Storage Account and Container. Select the
homepagelod7509087 storage account.
Step 5:
In the Backup Configuration page that is still left open, select Scheduled backup On, and configure
daily backups.
Step 6:
In the Backup Configuration page, click Save.
Step 7:
In the Backups page, click Backup.
References:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-backup
Question: 226
Your company recently hired a user named janet-7509087@ExamUsers.com.
You need to ensure that janet-7509087@ ExamUsers.com can connect to load
balancer named Web-LAB. The solution must ensure that janet-7509087@

ExamUsers.com can modify the backend pools.
Answer: See
explanation
below.
Explanation:
Step 1:
In the navigation list, choose Load Balancer.
Step 2:
Locate the load balancer named Web-ALB, and click the Access icon.
Step3:
In the Users blade, click Roles. In the Roles blade, click Add to add permissions for the user Janet-
7509087@ExamUsers.com.
Step 4:
Add permission to modify backend pools
References:
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-manage-permissions
Question: 227
Your marketing team creates a new website that you must load balance for 99.99
percent availability.
You need to deploy and configure a solution for both machines in the Web-AS
availability set to load balance the website over HTTP. The solution must use the
load balancer your resource group.
Answer: See
explanation
below.
Explanation:
To distribute traffic to the VMs in the availability set, a back-end address pool contains the IP
addresses of the virtual NICs that are connected to the load balancer. Create the back-end address
pool to include the VMs in the availability set.
Step 1:
Select All resources on the left menu, and then select LoadBalancer from the resource list.
Step 2:
Under Settings, select Backend pools, and then select Add.
Step 3:
On the Add a backend pool page, select the Web-AS availability set, and then select OK:
References:
https://docs.microsoft.com/en-us/azure/load-balancer/quickstart-create-basic-load-balancer-portal
Question: 228
Your Azure environment contains an application gateway and custom apps.

Another administrator modifies the application gateway and the apps to use HTTP
over TCP port 8080.
Users report that they can no longer connect to the apps.
You suspect that the cause of the issue is a change in the configuration of the
application gateway.
You need to modify the application gateway to resolve the issue.
Answer: See
explanation
below.
Explanation:
Step 1:
Select Networking and then select Application Gateway in the Featured list, and select the application
gateway, and select the settings.
Step 2:
Click HTTP for the protocol of the listener and make sure that the port is defined as 443.
References:
https://docs.microsoft.com/en-us/azure/application-gateway/create-ssl-portal
Question: 229
You plan to deploy a site-to-site VPN connection from on-premises network to your
Azure environment. The VPN connection will be established to the VNET01-USEA2
virtual network.
You need to create the required resources in Azure for the planned site-to-site VPN.
The solution must minimize costs.
NOTE: This task may a very long time to complete. You do NOT need to wait for the
deployment to complete this task successfully.
Answer: See
explanation
below.
Explanation:
We create a VPN gateway.
Step 1:
On the left side of the portal page, click + and type 'Virtual Network Gateway' in search. In Results,
locate and click Virtual network gateway.
Step 2:
At the bottom of the 'Virtual network gateway' page, click Create. This opens the Create virtual
network gateway page.
Step 3:
On the Create virtual network gateway page, specify the values for your virtual network gateway.
Gateway type: Select VPN. VPN gateways use the virtual network gateway type VPN.
Virtual network: Choose the existing virtual network VNET01-USEA2
Gateway subnet address range: You will only see this setting if you did not previously create a
gateway subnet for your virtual network.
Step 4:
Select the default values for the other setting, and click create.
The settings are validated and you'll see the "Deploying Virtual network gateway" tile on the
dashboard. Creating a gateway can take up to 45 minutes.
Note: This task may take a very long time to complete. You do NOT need to wait for the deployment
to complete this task successfully.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resource-
manager-portal
Case Study: 5
Humongous Insurance
Overview
Active Directory Environment
Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com.
The functional level of the forest is Windows Server 2012.
You recently provisioned an Azure Active Directory (Azure AD) tenant.
Network Infrastructure
Each office has a local data center that contains all the servers for that office. Each office has a
dedicated connection to the Internet.
Each office has several link load balancers that provide access to the servers.
Active Directory Issue
Several users in humongousinsurance.com have UPNs that contain special characters.
You suspect that some of the characters are unsupported in Azure AD.
Licensing Issue
You attempt to assign a license in Azure to several users and receive the following error message:
"Licenses not assigned. License agreement failed for one user."

You verify that the Azure subscription has the available licenses.
Requirements
Planned Changes
Humongous Insurance plans to open a new office in Paris. The Paris office will contain 1,000 users
who will be hired during the next 12 months. All the resources used by the Paris office users will be
hosted in Azure.
Planned Azure AD Infrastructure
The on-premises Active Directory domain will be synchronized to Azure AD.
All client computers in the Paris office will be joined to an Azure AD domain.
Planned Azure Networking Infrastructure
You plan to create the following networking resources in a resource group named All_Resources:
 Default Azure system routes that will be the only routes used to route traffic
 A virtual network named Paris-VNet that will contain two subnets named Subnet1 and
Subnet2
 A virtual network named ClientResources-VNet that will contain one subnet named
ClientSubnet
 A virtual network named AllOffices-VNet that will contain two subnets named Subnet3 and
Subnet4
You plan to enable peering between Paris-VNet and AllOffices-VNet. You will enable the Use remote
gateways setting for the Paris-VNet peerings.
You plan to create a private DNS zone named humongousinsurance.local and set the registration
network to the ClientResources-VNet virtual network.
Planned Azure Computer Infrastructure
Each subnet will contain several virtual machines that will run either Windows Server 2012 R2,
Windows Server 2016, or Red Hat Linux.
Department Requirements
Humongous Insurance identifies the following requirements for the company's departments:
 Web administrators will deploy Azure web apps for the marketing department. Each web app
will be added to a separate resource group. The initial configuration of the web apps will be
identical. The web administrators have permission to deploy web apps to resource groups.
 During the testing phase, auditors in the finance department must be able to review all Azure
costs from the past week.
Authentication Requirements
Users in the Miami office must use Azure Active Directory Seamless Single Sign-on (Azure AD
Seamless SSO) when accessing resources in Azure.
Question: 230
DRAG DROP
You need to prepare the environment to ensure that the web administrators can deploy the web apps
as quickly as possible.
Answer:
Explanation:
Step 1:
First you create a storage account using the Azure portal.
Step 2:
Select Automation options at the bottom of the screen. The portal shows the template on the
Template tab.
Deploy: Deploy the Azure storage account to Azure.
Step 3:
Share the template.
Scenario: Web administrators will deploy Azure web apps for the marketing department. Each web
app will be added to a separate resource group. The initial configuration of the web apps will be
identical. The web administrators have permission to deploy web apps to resource groups.
References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-manager-
quickstart-create-templates-use-the-portal
Question: 231
Which blade should you instruct the finance department auditors to use?
A. Partner information
B. Overview
C. Payment methods
D. Invoices
Answer: D
Explanation:
You can opt in and configure additional recipients to receive your Azure invoice in an email. This
feature may not be available for certain subscriptions such as support offers, Enterprise Agreements,
or Azure in Open.
1. Select your subscription from the Subscriptions page. Opt-in for each subscription you own. Click
Invoices then Email my invoice.
2. Click Opt in and accept the terms.

Scenario: During the testing phase, auditors in the finance department must be able to review all
Azure costs from the past week.
References: https://docs.microsoft.com/en-us/azure/billing/billing-download-azure-invoice-daily-
usage-date
Question: 232
You need to prepare the environment to meet the authentication requirements.

NOTE Each correct selection is worth one point.
A. Azure Active Directory (AD) Identity Protection and an Azure policy

B. a Recovery Services vault and a backup policy
C. an Azure Key Vault and an access policy
D. an Azure Storage account and an access policy
Answer: BD
Explanation:
D: Seamless SSO works with any method of cloud authentication - Password Hash Synchronization
or Pass-through Authentication, and can be enabled via Azure AD Connect.
B: You can gradually roll out Seamless SSO to your users. You start by adding the following Azure
AD URL to all or selected users' Intranet zone settings by using Group Policy in Active Directory:
https://autologon.microsoftazuread-sso.com
Incorrect Answers:
A: Seamless SSO needs the user's device to be domain-joined, but doesn't need for the device to be
Azure AD Joined.
C: Azure AD connect does not port 8080. It uses port 443.
E: Seamless SSO is not applicable to Active Directory Federation Services (ADFS).
Scenario: Users in the Miami office must use Azure Active Directory Seamless Single Sign-on (Azure
AD Seamless SSO) when accessing resources in Azure.
Planned Azure AD Infrastructure include: The on-premises Active Directory domain will be
synchronized to Azure AD.
aadconnect-sso-quick-start
Question: 233
You need to define a custom domain name for Azure AD to support the planned infrastructure.
Which domain name should you use?
A. Join the client computers in the Miami office to Azure AD.

B. Add http://autologon.microsoftazuread-sso.com to the intranet zone of each client computer in the
Miami office.
C. Allow inbound TCP port 8080 to the domain controllers in the Miami office.
D. Install Azure AD Connect on a server in the Miami office and enable Pass-through Authentication
E. Install the Active Directory Federation Services (AD FS) role on a domain controller in the Miami
office.
Answer: BD
Explanation:
Every Azure AD directory comes with an initial domain name in the form of
domainname.onmicrosoft.com. The initial domain name cannot be changed or deleted, but you can
add your corporate domain name to Azure AD as well. For example, your organization probably has
other domain names used to do business and users who sign in using your corporate domain name.
Adding custom domain names to Azure AD allows you to assign user names in the directory that are
familiar to your users, such as ‘alice@contoso.com.’ instead of 'alice@domain
name.onmicrosoft.com'.
Scenario:
Network Infrastructure: Each office has a local data center that contains all the servers for that
office. Each office has a dedicated connection to the Internet.
Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com
Planned Azure AD Infrastructure: The on-premises Active Directory domain will be synchronized to
Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-
domain
Question: 234
You need to resolve the Active Directory issue.

What should you do?
A. From Active Directory Users and Computers, select the user accounts, and then modify the User
Principal
Name value.
B. Run idfix.exe, and then use the Edit action.
C. From Active Directory Domains and Trusts, modify the list of UPN suffixes.
D. From Azure AD Connect, modify the outbound synchronization rule.
Answer: B
IdFix is used to perform discovery and remediation of identity objects and their attributes in an on-
premises Active Directory environment in preparation for migration to Azure Active Directory. IdFix is
intended for the Active Directory administrators responsible for directory synchronization with Azure
Active Directory.
Scenario: Active Directory Issue
Several users in humongousinsurance.com have UPNs that contain special characters.
You suspect that some of the characters are unsupported in Azure AD.
References: https://www.microsoft.com/en-us/download/details.aspx?id=36832
Question: 235
Which blade should you instruct the finance department auditors to use?
A. invoices
B. partner information
C. cost analysis
D. External services
Answer: A
Question: 236
You need to define a custom domain name for Azure AD to support the planned infrastructure.
Which domain name should you use?
A. ad.humongousinsurance.com
B. humongousinsurance.onmicrosoft.com
C. humongousinsurance.local
D. humongousinsurance.com
Answer: D
Explanation:
Every Azure AD directory comes with an initial domain name in the form of
domainname.onmicrosoft.com. The initial domain name cannot be changed or deleted, but you can
add your corporate domain name to Azure AD as well. For example, your organization probably has
other domain names used to do business and users who sign in using your corporate domain name.
Adding custom domain names to Azure AD allows you to assign user names in the directory that are
familiar to your users, such as ‘alice@contoso.com.’ instead of 'alice@domain
name.onmicrosoft.com'.
Scenario:
Network Infrastructure: Each office has a local data center that contains all the servers for that
office. Each office has a dedicated connection to the Internet.
Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com
Planned Azure AD Infrastructure: The on-premises Active Directory domain will be synchronized to
Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-
domain
Question: 237
You need to prepare the environment to meet the authentication requirements.

A. Allow inbound TCP port 8080 to the domain controllers in the Miami office.
B. Add http://autogon.microsoftazuread-sso.com to the intranet zone of each client computer in the
Miami
office.
C. Join the client computers in the Miami office to Azure AD.
D. Install the Active Directory Federation Services (AD FS) role on a domain controller in the Miami
office.
E. Install Azure AD Connect on a server in the Miami office and enable Pass-through Authentication.
Answer: BE
Explanation:
B: You can gradually roll out Seamless SSO to your users. You start by adding the following Azure
AD URL to all or selected users' Intranet zone settings by using Group Policy in Active Directory:
https://autologon.microsoftazuread-sso.com
E: Seamless SSO works with any method of cloud authentication - Password Hash Synchronization
or Pass-through Authentication, and can be enabled via Azure AD Connect.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-sso-quick-start
Question: 238
DRAG DROP
You have an Azure subscription that contains two virtual networks named VNet1 and VNet2. Virtual
machines connect to the virtual networks.
The virtual networks have the address spaces and the subnets configured as shown in the following
table.
You need to add the address space of 10.33.0.0/16 to VNet1. The solution must ensure that the hosts
on VNet1 and VNet2 can communicate.
Answer:
Explanation:
Step 1: Remove peering between Vnet1 and VNet2.
You can't add address ranges to, or delete address ranges from a virtual network's address space
once a virtual network is peered with another virtual network. To add or remove address ranges,
delete the peering, add or remove the address ranges, then re-create the peering.
Step 2: Add the 10.44.0.0/16 address space to VNet1.
Step 3: Recreate peering between VNet1 and VNet2
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-peering
Question: 239
You need to resolve the licensing issue before you attempt to assign the license again.
What should you do?
A. From the Groups blade, invite the user accounts to a new group.
B. From the Profile blade, modify the usage location.
C. From the Directory role blade, modify the directory role.
Answer: B
Explanation:
License cannot be assigned to a user without a usage location specified.
Scenario: Licensing Issue
You attempt to assign a license in Azure to several users and receive the following error message:
"Licenses
not assigned. License agreement failed for one user."
You verify that the Azure subscription has the available licenses.
Case Study: 6
Contoso Ltd
Overview
Contoso, Ltd. is a manufacturing company that has offices worldwide. Contoso works with partner
organizations to bring products to market.
Contoso products are manufactured by using blueprint files that the company authors and maintains.
Currently, Contoso uses multiple types of servers for business operations, including the following:
 File servers
 Domain controllers
 Microsoft SQL Server servers
Your network contains an Active Directory forest named contoso.com. All servers and client
computers are joined to Active Directory.
You have a public-facing application named App1. App1 is comprised of the following three tiers:
 A SQL database
 A web front end
 A processing middle tier
Each tier is comprised of five virtual machines. Users access the web front end by using HTTPS only.
Requirements
Planned Changes
Contoso plans to implement the following changes to the infrastructure:
Move all the tiers of App1 to Azure.
Move the existing product blueprint files to Azure Blob storage.
Create a hybrid directory to support an upcoming Microsoft Office 365 migration project.
Technical Requirements
Contoso must meet the following technical requirements:
 Move all the virtual machines for App1 to Azure.

 Minimize the number of open ports between the App1 tiers.
 Ensure that all the virtual machines for App1 are protected by backups.
 Copy the blueprint files to Azure over the Internet.
 Ensure that the blueprint files are stored in the archive storage tier.
 Ensure that partner access to the blueprint files is secured and temporary.
 Prevent user passwords or hashes of passwords from being stored in Azure.
 Use unmanaged standard storage for the hard disks of the virtual machines.
 Ensure that when users join devices to Azure Active Directory (Azure AD), the users use a
mobile phone to verify their identity.
Minimize administrative effort whenever possible.
User Requirements
Contoso identifies the following requirements for users:
Ensure that only users who are part of a group named Pilot can join devices to Azure AD.
Designate a new user named Admin1 as the service administrator of the Azure subscription.
Ensure that a new user named User3 can create network objects for the Azure subscription.
Question: 240
You need to meet the user requirement for Admin1.

What should you do?
A. From the Subscriptions blade, select the subscription, and then modify the Properties.
B. From the Subscriptions blade, select the subscription, and then modify the Access control (IAM)
settings.
C. From the Azure Active Directory blade, modify the Properties.
D. From the Azure Active Directory blade, modify the Groups.
Answer: A
Explanation:
Change the Service administrator for an Azure subscription
1. Sign in to Account Center as the Account administrator.
2. Select a subscription.
3. On the right side, select Edit subscription details.
Scenario: Designate a new user named Admin1 as the service administrator of the Azure
subscription.
References: https://docs.microsoft.com/en-us/azure/billing/billing-add-change-azure-subscription-
administrator
Question: 241
You need to move the blueprint files to Azure.

What should you do?
A. Generate a shared access signature (SAS). Map a drive, and then copy the files by using File
Explorer.
B. Use the Azure Import/Export service.
C. Generate an access key. Map a drive, and then copy the files by using File Explorer.
D. Use Azure Storage Explorer to copy the files.
Answer: D
Explanation:
Azure Storage Explorer is a free tool from Microsoft that allows you to work with Azure Storage data
on Windows, macOS, and Linux. You can use it to upload and download data from Azure blob
storage.
Scenario:
Planned Changes include: move the existing product blueprint files to Azure Blob storage.
Technical Requirements include: Copy the blueprint files to Azure over the Internet.
References: https://docs.microsoft.com/en-us/azure/machine-learning/team-data-science-
process/move-data-to-azure-blob-using-azure-storage-explorer
Question: 242
You need to implement a backup solution for App1 after the application is moved.
What should you create first?
A. a recovery plan
B. an Azure Backup Server
C. a backup policy
D. a Recovery Services vault
Answer: D
Explanation:
A Recovery Services vault is a logical container that stores the backup data for each protected
resource, such as Azure VMs. When the backup job for a protected resource runs, it creates a
recovery point inside the Recovery Services vault.
Scenario:
There are three application tiers, each with five virtual machines.
Move all the virtual machines for App1 to Azure.
Ensure that all the virtual machines for App1 are protected by backups.
References: https://docs.microsoft.com/en-us/azure/backup/quick-backup-vm-portal
Question: 243
HOTSPOT
You need to recommend a solution for App1. The solution must meet the technical requirements.
What should you include in the recommendation? To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
This reference architecture shows how to deploy VMs and a virtual network configured for an N-tier
application, using SQL Server on Windows for the data tier.
Scenario: You have a public-facing application named App1. App1 is comprised of the following three
tiers:
 A SQL database
 A web front end
 A processing middle tier
 Technical requirements include:
 Move all the virtual machines for App1 to Azure.
 Minimize the number of open ports between the App1 tiers.
References: https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/n-tier/n-tier-
sql-server
Question: 244
HOTSPOT
You need to configure the Device settings to meet the technical requirements and the user
requirements.
Which two settings should you modify? To answer, select the appropriate settings in the answer are
a.
Answer:
Explanation:
Box 1: Selected
Only selected users should be able to join devices
Box 2: Yes
Require Multi-Factor Auth to join devices.
From scenario:
 Ensure that only users who are part of a group named Pilot can join devices to Azure AD
 Ensure that when users join devices to Azure Active Directory (Azure AD), the users use a
mobile phone to verify their identity.
Question: 245
You need to recommend an identify solution that meets the technical requirements.
A. federated single-on (SSO) and Active Directory Federation Services (AD FS)
B. password hash synchronization and single sign-on (SSO)
C. cloud-only user accounts
D. Pass-through Authentication and single sign-on (SSO)
Answer: A
Explanation:
Active Directory Federation Services is a feature and web service in the Windows Server Operating
System that allows sharing of identity information outside a company’s network.
Scenario: Technical Requirements include:
Prevent user passwords or hashes of passwords from being stored in Azure.
References: https://www.sherweb.com/blog/active-directory-federation-services/
Question: 246
You are planning the move of App1 to Azure.

You create a network security group (NSG).
You need to recommend a solution to provide users with access to App1.
A. Create an outgoing security rule for port 443 from the Internet. Associate the NSG to all the
subnets.
B. Create an incoming security rule for port 443 from the Internet. Associate the NSG to all the
subnets.
C. Create an incoming security rule for port 443 from the Internet. Associate the NSG to the subnet
that
contains the web servers.
D. Create an outgoing security rule for port 443 from the Internet. Associate the NSG to the subnet
that
contains the web servers.
Answer: C
Explanation:
As App1 is public-facing we need an incoming security rule, related to the access of the web servers.
Scenario: You have a public-facing application named App1. App1 is comprised of the following three
tiers: a SQL database, a web front end, and a processing middle tier.
Question: 247
HOTSPOT
You need to identify the storage requirements for Contoso.
Answer:
Explanation:
Box 1: Yes
Contoso is moving the existing product blueprint files to Azure Blob storage.
Use unmanaged standard storage for the hard disks of the virtual machines. We use Page Blobs for
these.
Box 2: No
Box 3: No

Az-103 2 PDF

Uploaded by

Copyright:

Available Formats

Az-103 2 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Az-103 2 PDF

Uploaded by

Copyright:

Available Formats

You need to recommend an identify solution that meets the technical requirements.

You need to recommend an identify solution that meets the technical requirements.

What should you do?

What should you do?

Microsoft AZ-103 Exam

Exam Microsoft AZ-103 Exam

Title Microsoft Azure Administrator Exam

“Best Material, Great Results”. www.certkingdom.com 1 of 1

Product Questions: 247

You have an Azure subscription that contains 10 virtual machines.

A. three rules and three action groups

Which resource can you move to RG2?

these questions will not appear in the review screen.

To answer, select the appropriate options in the answer are

A. Configure the extensions for VM3 and VM4.

Store1 contains a file share named Dat

A. an XML manifest file

You regularly create and delete virtual machines.

You deploy a Linux virtual machine named VM1 to Subscription1.

A. Modify the extensionProfile section of the Azure Resource Manager template.

A. Add a 500-GB managed disk.

Subnet1 is associated to VNet1. NIC1 attaches VM1 to Subnet1.

A. Modify the properties of NSG1.

You apply RT1 to Subnet1.

You plan to deploy five virtual machines to a virtual network subnet.

A. Move VNet1 to Subscription2.

A. Associate the NSG to Subnet1.

Box 1: vNET6 only

Subscription1 contains the virtual machines in the following table:

To which subnets can you apply NSG1?

A. the subnets on VNet2 only

You create an Azure Storage account named contosostorage.

You plan to create a file share named dat

these questions will not appear in the review screen.

separate resource groups.

A. From the Directory role blade, modify the directory role.

You have an Active Directory forest named contoso.com.

A. From Synchronization Service Manager, run a full import.

Adatum.onmicrosoft.com contains the user accounts in the following table.

A. Azure Active Directory (AD) Identity Protection and an Azure policy

Your company registers a domain name of contoso.com.

Your company registers a domain name of contoso.com.

Your company registers a domain name of contoso.com.

these questions will not appear in the review screen.

You have an Azure subscription.

*Ensures that compliance reports in the Azure portal are accurate.

8. The disk stays in storage but is no longer attached to a virtual machine.

Select two alternatives below.

1. Visit the Subscriptions blade in Azure portal and select a subscription.

What can you do from the Azure portal?

A. Generate an automation script for RG1.

A. From the Azure portal, configure the portal settings.

You sign up for Azure Active Directory (Azure AD) Premium.

A. Device settings from the Devices blade.

information presented in the graphic.

A. Create an PTR record named research in the adatum.com zone.

D. Create an A record named “.research in the adatum.com zone.

First, create Recovery Services vault.

Step 3: In the Recovery Services vault menu, for example,