CCNA 1 v6 Chapter 3

CCNA 1 v6.
0 Chapter 3 Exam Answers 2018 (100%)

By CCNA5.NET | February 6, 2017
0 Comment
Rate this post
Cisco CCNA 1 v6.0 Chapter 3 Exam Answers

Score 100%
1. What method can be used by two computers to ensure
that packets are not dropped because too much data is
being sent too quickly?
encapsulation
flow control*
access method
response timeout
2. What type of communication will send a message to all

devices on a local area network?
broadcast*
multicast
unicast
allcast
3. What process is used to place one message inside

another message for transfer from the source to the
destination?
access control
decoding
encapsulation*
flow control

4. A web client is sending a request for a webpage to a

web server. From the perspective of the client, what is
the correct order of the protocol stack that is used to
prepare the request for transmission?
HTTP, IP, TCP, Ethernet
HTTP, TCP, IP, Ethernet*

Ethernet, TCP, IP, HTTP
Ethernet, IP, TCP, HTTP
5. Which statement is correct about network protocols?

Network protocols define the type of hardware that is used and how it is mounted in
racks.
They define how messages are exchanged between the source and the
destination.*
They all function in the network access layer of TCP/IP.
They are only required for exchange of messages between devices on remote
networks.
6. Which statement is true about the TCP/IP and OSI

models?
The TCP/IP transport layer and OSI Layer 4 provide similar services and
functions.*
The TCP/IP network access layer has similar functions to the OSI network layer.
The OSI Layer 7 and the TCP/IP application layer provide identical functions.
The first three OSI layers describe general services that are also provided by the
TCP/IP internet layer.
7. What is an advantage of using standards to develop

and implement protocols?
A particular protocol can only be implemented by one manufacturer.
Products from different manufacturers can interoperate successfully.*

Different manufacturers are free to apply different requirements when implementing
a protocol.
Standards provide flexibility for manufacturers to create devices that comply with
unique requirements.
8. What three application layer protocols are part of the

TCP/IP protocol suite? (Choose three.)
ARP
DHCP*
DNS*
FTP*
NAT
PPP
9. What are proprietary protocols?

protocols developed by private organizations to operate on any vendor hardware
protocols that can be freely used by any organization or vendor
protocols developed by organizations who have control over their definition

and operation*
a collection of protocols known as the TCP/IP protocol suite
10. What is an advantage of network devices using open

standard protocols?
Network communications is confined to data transfers between devices from the
same vendor.
A client host and a server running different operating systems can

successfully exchange data.*
Internet access can be controlled by a single ISP in each market.
Competition and innovation are limited to specific types of products.

11. Refer to the exhibit. If Host1 were to transfer a file to

the server, what layers of the TCP/IP model would be
used?
only application and Internet layers
only Internet and network access layers
only application, Internet, and network access layers
application, transport, Internet, and network access layers*

only application, transport, network, data link, and physical layers
application, session, transport, network, data link, and physical layers
12. Which three layers of the OSI model are comparable

in function to the application layer of the TCP/IP model?
(Choose three.)
application*
presentation*
session*
transport
data link
physical
network
13. At which layer of the OSI model would a logical

address be encapsulated?
physical layer
data link layer
network layer*
transport layer

14. Which PDU format is used when bits are received

from the network medium by the NIC of a host?
file
frame*
packet
segment
15. Which PDU is processed when a host computer is de-

encapsulating a message at the transport layer of the
TCP/IP model?
bits
frame
packet
segment*

16. Refer to the exhibit. HostA is attempting to contact

ServerB. Which two statements correctly describe the
addressing that HostA will generate in the process?
(Choose two.)
A packet with the destination IP address of RouterB.
A frame with the destination MAC address of SwitchA.
A packet with the destination IP address of RouterA.
A frame with the destination MAC address of RouterA.*

A packet with the destination IP address of ServerB.*
A frame with the destination MAC address of ServerB.
17. Which address does a NIC use when deciding

whether to accept a frame?
source IP address
source MAC address
destination IP address
destination MAC address*

source Ethernet address

18. What will happen if the default gateway address is
incorrectly configured on a host?
The host cannot communicate with other hosts in the local network.
The switch will not forward packets initiated by the host.
The host will have to use ARP to determine the correct address of the default
gateway.
The host cannot communicate with hosts in other networks.*

A ping from the host to 127.0.0.1 would not be successful.
19. Which characteristic describes the default gateway of

a host computer?
the logical address of the router interface on the same network as the host
computer*
the physical address of the switch interface connected to the host computer
the physical address of the router interface on the same network as the host
computer
the logical address assigned to the switch interface connected to the router
20. Match each description to its corresponding term.

(Not all options are used.)
message encoding -> the process of converting information from one format
into another acceptable for transmission
message encapsulation -> the process of placing one message format inside
another message format
message sizing -> the process of breaking up a long message into individual
pieces before being sent over the network

21. Match the protocol function to the description while

taking into consideration that a network client is visiting
a web site. (Not all options are used.)
governing the way a web server and a web client interact -> application
protocol
talking the segments from the transport protocol, encapsulating them into
packets, and assigning them with appropriate addresses -> internet protocol
preparing packets to be transmitted over the network media -> network access
protocol
– not scored –
managing the individual conversation between web servers and web clients ->
transport protocol

22. Match the description to the organization. (Not all

options are used.)

CCNA 1 v6 Chapter 3

Uploaded by

Copyright:

Available Formats

CCNA 1 v6 Chapter 3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CCNA 1 v6 Chapter 3

Uploaded by

Copyright:

Available Formats

CCNA 1 v6.

0 Chapter 3 Exam Answers 2018 (100%)

Cisco CCNA 1 v6.0 Chapter 3 Exam Answers

2. What type of communication will send a message to all

3. What process is used to place one message inside

4. A web client is sending a request for a webpage to a

HTTP, TCP, IP, Ethernet*

Ethernet, IP, TCP, HTTP

5. Which statement is correct about network protocols?

6. Which statement is true about the TCP/IP and OSI

7. What is an advantage of using standards to develop

Products from different manufacturers can interoperate successfully.*

8. What three application layer protocols are part of the

9. What are proprietary protocols?

protocols that can be freely used by any organization or vendor

protocols developed by organizations who have control over their definition

10. What is an advantage of network devices using open

A client host and a server running different operating systems can

Competition and innovation are limited to specific types of products.

11. Refer to the exhibit. If Host1 were to transfer a file to

only application and Internet layers

only Internet and network access layers

only application, Internet, and network access layers

application, transport, Internet, and network access layers*

application, session, transport, network, data link, and physical layers

12. Which three layers of the OSI model are comparable

13. At which layer of the OSI model would a logical

data link layer

14. Which PDU format is used when bits are received

15. Which PDU is processed when a host computer is de-

16. Refer to the exhibit. HostA is attempting to contact

A frame with the destination MAC address of SwitchA.

A packet with the destination IP address of RouterA.

A frame with the destination MAC address of RouterA.*

17. Which address does a NIC use when deciding

source MAC address

destination MAC address*

The switch will not forward packets initiated by the host.

The host cannot communicate with hosts in other networks.*

19. Which characteristic describes the default gateway of

20. Match each description to its corresponding term.

21. Match the protocol function to the description while

22. Match the description to the organization. (Not all

You might also like