Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Unit 17 12 PDF

    Uploaded by

    Debarshi Sahoo
    This document summarizes the design of a beam between columns C1 and C2. It calculates the effective width of the isolated T-beam as 4.703 meters. It assumes the section is balanced. It then determines the depth d as 1062 mm. The area of steel reinforcement (As1) required for the critical bending moment in the span is calculated as 10452 mm2 and will be provided in two layers of bars. It checks the development length and finds that all 13432 mm2 of steel bars have been extended to the edge of the footing and can be bent at 90 degrees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Unit 17 12 PDF

    Uploaded by

    Debarshi Sahoo
    36 views1 page
    This document summarizes the design of a beam between columns C1 and C2. It calculates the effective width of the isolated T-beam as 4.703 meters. It assumes the section is balanced. It then determines the depth d as 1062 mm. The area of steel reinforcement (As1) required for the critical bending moment in the span is calculated as 10452 mm2 and will be provided in two layers of bars. It checks the development length and finds that all 13432 mm2 of steel bars have been extended to the edge of the footing and can be bent at 90 degrees.

    Original Description:

    Original Title

    Unit-17-12.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a beam between columns C1 and C2. It calculates the effective width of the isolated T-beam as 4.703 meters. It assumes the section is balanced. It then determines the depth d as 1062 mm. The area of steel reinforcement (As1) required for the critical bending moment in the span is calculated as 10452 mm2 and will be provided in two layers of bars. It checks the development length and finds that all 13432 mm2 of steel bars have been extended to the edge of the footing and can be bent at 90 degrees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    Unit 17 12 PDF

    Uploaded by

    Debarshi Sahoo
    This document summarizes the design of a beam between columns C1 and C2. It calculates the effective width of the isolated T-beam as 4.703 meters. It assumes the section is balanced. It then determines the depth d as 1062 mm. The area of steel reinforcement (As1) required for the critical bending moment in the span is calculated as 10452 mm2 and will be provided in two layers of bars. It checks the development length and finds that all 13432 mm2 of steel bars have been extended to the edge of the footing and can be bent at 90 degrees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    KCC Structures-1 Design of'beam I ~ e t w e eC~l ~& C2

    I,, lor ell'cci~vcw~dlhcalculation of rsolattld 'I'-beam = 5 - (0.024 + 0.273) = 4.703 m

    1:or balanced scction


    j , = 0.0
    rlssuini~~g

    or d = 1058.4 1n1n
    llence provided 1) = 1150 inin

    32
    .. d = 1150 - 40 - 32 - - = 1062 (Assuming $32 rcinSorccmc.nt in two layers)
    2

    Areas of steel (A,,)

    i) For critical 1I.M. in the span

    M = crSl x A,l x la

    1, O.9d = 0.9 x 1062 = 955.8 inln

    M - 1275.24 x 1 0 ~
    :. A,[ = --- - = 10263.17 mm"
    o,,,l,? 130 x 955.8

    Hence provided.13432 in two layers ( A , = 10452 mm2)


    Clieck for L)eveiopt?~enrLength

    A$,jB d
    wberc Mi = a,,
    = 140 x 11 x 804 x 0.9 x 1062

    =n x 107.58 x lo6 Ninm


    V = 1085.86 kN
    L, = greater of 124 (= 12x32=384) or d = 1062
    Subscibutirrg al! values in the abovc equation

    Hence all 13432 have bee11 extended upto the edge of footing on H.H.S. and an
    L.H.S. all the bars may be bent at 90' to make up I.,, at the edge.

    You might also like