Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    Memoria Samet Doble

    Uploaded by

    Juan Emanuel Venturelli
    This document contains analysis of the cross-sectional properties and structural capacities of a steel profile called PC-03-D-G. It lists the section properties, material properties, design strengths, and verifies that the required internal flexural strengths are less than the design flexural capacities. It concludes that the cross-section is adequate for the applied loads.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Memoria Samet Doble

    Uploaded by

    Juan Emanuel Venturelli
    20 views2 pages
    This document contains analysis of the cross-sectional properties and structural capacities of a steel profile called PC-03-D-G. It lists the section properties, material properties, design strengths, and verifies that the required internal flexural strengths are less than the design flexural capacities. It concludes that the cross-section is adequate for the applied loads.

    Original Description:

    Calculo

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains analysis of the cross-sectional properties and structural capacities of a steel profile called PC-03-D-G. It lists the section properties, material properties, design strengths, and verifies that the required internal flexural strengths are less than the design flexural capacities. It concludes that the cross-section is adequate for the applied loads.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views2 pages

    Memoria Samet Doble

    Uploaded by

    Juan Emanuel Venturelli
    This document contains analysis of the cross-sectional properties and structural capacities of a steel profile called PC-03-D-G. It lists the section properties, material properties, design strengths, and verifies that the required internal flexural strengths are less than the design flexural capacities. It concludes that the cross-section is adequate for the applied loads.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Autodesk Robot Structural Analysis Professional 2017

    Author: Juan Emanuel Venturelli File: Samet Doble.rtd


    Address: Project: Perfil "C" Doble Samet PC-03-D-G

    Symbol Values Unit Symbol description Section

    MEMBER: PC-03-D-G

    Cross-section properties: PC-03-D-G 44x88x2.5

    Ax 754.847 mm2 Cross-section area


    Ay 266.677 mm2 Shear area - Y-axis
    Az 443.228 mm2 Shear area - Z-axis
    J 2770.722 mm4 Torsional constant
    Iy 484386.807 mm4 Moment of inertia of a section about the Y-axis
    Iz 234121.764 mm4 Moment of inertia of a section about the Z-axis
    Zy 15117.045 mm3 Plastic section modulus about the Y (major) axis
    Sy 11008.791 mm3 Elastic section modulus about the Y-axis
    Zz 12594.936 mm3 Plastic section modulus about the Z (minor) axis
    Sz 10641.898 mm3 Elastic section modulus about the Z-axis
    d 88.00 mm Height of cross-section
    bf 44.00 mm Width of cross-section
    tf 0.00 mm Flange thickness
    tw 0.00 mm Web thickness
    ry 25.33 mm Radius of gyration - Y-axis
    rz 17.61 mm Radius of gyration - Z-axis

    Material:

    Name STEEL
    Fy 180.00 MPa Specified minimum yield strength of material
    Fu 300.90 MPa Specified minimum tensile strength
    E 199948.02 MPa Longitudinal elasticity coefficient

    Partial factor method LRFD

    Fib 0.90 Resistance factor for flexure [F1.(1)]

    Local buckling

    Lamf 0.00 Width-To-Thickness ratio for a flange [Table B4.1a,b]


    Lamw 0.00 Width-To-Thickness ratio for a web [Table B4.1a,b]
    Section class for simple bending (My moment)
    Lamf_p_My 12.67 Limiting slenderness for compact flange [Table B4.1b]
    Lamf_r_My 32.99 Limiting slenderness for noncompact flange [Table B4.1b]
    ClassF_My Compact Flange class [Table B4.1b]
    Lamw_p_My 125.32 Limiting slenderness for compact web [Table B4.1b]
    Lamw_r_My 189.98 Limiting slenderness for noncompact web [Table B4.1b]
    ClassW_My Compact Web class [Table B4.1b]
    Section class for simple bending (Mz moment)
    Lamf_p_Mz 12.67 Limiting slenderness for compact flange [Table B4.1b]
    Lamf_r_Mz 32.99 Limiting slenderness for noncompact flange [Table B4.1b]
    ClassF_Mz Compact Flange class [Table B4.1b]
    Lamw_p_Mz 125.32 Limiting slenderness for compact web [Table B4.1b]
    Lamw_r_Mz 189.98 Limiting slenderness for noncompact web [Table B4.1b]
    ClassW_Mz Compact Web class [Table B4.1b]

    Date : 24/06/20 Page : 1


    Autodesk Robot Structural Analysis Professional 2017
    Author: Juan Emanuel Venturelli File: Samet Doble.rtd
    Address: Project: Perfil "C" Doble Samet PC-03-D-G

    Symbol Values Unit Symbol description Section

    Parameters of lateral buckling analysis:

    Rm 1.00 Cross-section monosymmetry parameter [Comm.F1]


    Cb 1.00 Lateral-torsional buckling modification factor [F1.(3)]
    Lb 2000.00 mm Laterally unbraced length of a member (lateral-torsional [F]
    buckling)
    Other:

    Internal forces

    Mry 10.00 N*m Required flexural strength


    Mrz 10.00 N*m Required flexural strength

    Nominal strengths:

    About the Y axis of cross-section


    Mpy 2721.07 N*m Nominal plastic bending moment [F]
    Mny 2721.07 N*m Nominal flexural strength [F]
    About the Z axis of cross-section
    Mpz 2267.09 N*m Nominal plastic bending moment [F]
    Mnz 2267.09 N*m Nominal flexural strength [F]

    Design strengths:

    About the Y axis of cross-section


    Fib*Mpy 2448.96 N*m Design plastic bending moment [F]
    Fib*Mny 2448.96 N*m Design flexural strength [F]
    About the Z axis of cross-section
    Fib*Mpz 2040.38 N*m Design plastic bending moment [F]
    Fib*Mnz 2040.38 N*m Design flexural strength [F]

    Verification formulas:

    UF(H1_1b) 0.01 Mry/(Fib*Mny) + Mrz/(Fib*Mnz) Verified

    Ratio:

    RAT 0.01 Efficiency ratio Section OK

    Date : 24/06/20 Page : 2

    You might also like