Vertical Machining Center

Vertical Machining Center

VX400/500/650

MT VX400/500/650 Ⓔ-10. 02. 1,000

 World Top Class Quality
4 0 0 HYUNDAI WIA Machine Tools

VX 500
High Speed & Productivity Vertical Machining Center

X
V 650
VX VX400

VX400/500/650 VX650
Vertical Machining Center
Advanced Technology, Compact Design -
Next-Generation Vertical Machining Center
The HYUNDAI-KIA Vertical Machining Center series was developed by applying the
company’s accumulated know-how and cutting-edge technology.
VX500
The series uses an angular contact ball bearing, a high-precision main spindle with
heavy duty cutting power and minimal heat distortion, and achieves high accuracy,
high rigidity and high precision.

2 3
VX400 Vertical Machining Center VX400/500/650

That boasts the largest working area, The Strongest Machine

and the highest speed and power Performance, The Fastest Speed
High-Quality Machining Center Increased Reliability with High-Speed,
•Gearless and beltless direct drive spindle (8,000 rpm) can perform
High-Accuracy Feed Drive System
heavy-duty cutting even during high-speed machining. •S table, high-accuracy operation through
• The largest working area (800x600x520mm) in its class minimization of thermal displacement and
backlash by the use of a double-anchored ball
• Energy saving type, easy to service and maintain
screw support method in each axis
•A chieves high-accuracy feed even during
lengthy operation by the use of an LM guide
VX400 ways
Table Size
1,000×460mm (39.4″×18.1″) Wide Table for Machining Work
Travel (X/Y/Z) •A wide working area of 1,000 x 460 mm can
800×460×520mm (31.5″×18.1″×20.5″) accommodate installation of devices and
work-pieces of a variety of sizes.
Ultra-Precision High- •The X-axis and Y-axis have almost no over-
Speed Spindle Structure hang, enabling the same precision machining
even for work-pieces installed at the corner 600kg
•Shortens acceleration and deceleration times
by the use of a direct drive motor, main-
of the table.
(1,323lb)
•A front-opening door with a wide opening is
tenance free
installed, providing more accessibility during
•Standard spindle speed of 8,000 rpm crane operation.
(12,000 rpm Optional)
•A c h i e v e s h i g h s p e e d w i t h s p i n d l e Superior Chip Disposal
acceleration and deceleration time of 1.26
Minimization of material process distortion and flawless chip disposal mechanism
sec (0 → 8,000 rpm)
through a cover coolant chip disposal using a side flood coolant pump and work
High-Rigidity Bed and Column washing
Ensures high-quality machining and high-speed high-accuracy machining
with its rational distribution structure and minimization of displacement
Spindle Torque Diagram
divergence due to heat and machining error. Rib forms were symmetrically
placed, greatly increasing the structural rigidity with a box structure.
8,000rpm 12,000rpm

■ Tool Changing Time T-T : 18.5sec C-C : 5.9sec

■ Rapid Traverse Speed X/Y/Z : 32m/min (1,260ipm)
■ Spindle RPM 8,000[12,000]rpm
■ Spindle Motor Output 15/11kW(20/15HP)
(30min/Cont.)

4 5
VX500 Vertical Machining Center VX400/500/650

Super power Vertical Machining Center Super powerful machining center by

High Speed, High Accuracy, super precision mechanism
High Rigidity Mechanism High Power, High Precision Spindle
Accomplishment of powerful spindle with speed of 8,000RPM and motor output
15kW, and torque 286Nm
VX 500, VX500/50
Table Size Accomplishment of Advanced Productivity
1,200×500mm (47.2″×19.7″)
•Accomplishment of advanced productivity by minimizing non-cutting time during
Travel (X/Y/Z) Spindle Torque Diagram
axis’ movement, feed rate of X and Y axis are 36m/min.
1,060×510×635mm (41.7″×20.1″×25″) VX500 (8,000rpm)
•Long X-axis (1,060mm), Y-axis (510mm), and Z-axis (635mm) travels accomplished
286Nm (15min, S3 15%)
economical efficiency and excellent productivity.
143Nm (cont)

TORQUE(Nm)
Automatic Tool The Biggest Max.Work-

POWER(kW)
Changer Piece Size in its Class

SPINDLE SPEED (rpm) 800kg

VX500 (10,000rpm)
(1,764 lb)
117.6Nm (30min, S3 60%)

95.3Nm (cont)

TORQUE(Nm)
POWER(kW)
18.5kW
(30min, S3 60%)

15kW(cont)
High precision, multi CAM type ATC
High Accuracy, Highly Rigid

CHANGe SPeeD
VOLUMe LINe
bASe SPeeD
Machine Structure
The most optimized design bed, column, saddle, and head
Double Anchors Supported Ball-Screw
35 1500 4000 10000
maintain high rigidity at any circumstance, so distortion is SPINDLE SPEED (rpm)
extremely minimized even during heavy duty cutting. Precisely pretension ball-screw minimizes
VX500/50 (6,000rpm)
heat growth, also double anchors support
357.7Nm (15min, S3 15%)

system adds more rigidity.

178.3Nm (cont)

■ Tool Changing Time NT #40 : T-T : 2.6 sec, C-C : 6.6 sec

TORQUE(Nm)
POWER(kW)
NT #50 : T-T : 4 sec, C-C : 8 sec
■ Rapid Traverse Speed X, Y-axis : 36m/min(1,417ipm)

Z-axis : 30m/min(1,181ipm)
■ Spindle RPM NT #40 : 8,000(10,000)rpm
NT #50 : 6,000rpm
■ Spindle Motor Output 15/11kW(20/15HP) 35 400 600 4800 6000
SPINDLE SPEED (rpm)
(30min/Cont.) [18.5/15kW(25/20HP] - Option

6 7
VX650 Vertical Machining Center VX400/500/650

High Accuracy, Highly rigid machine structure,

Accomplishment of wide range machining of high
quality, high performance and high productivity
High class Vertical Machining Center
High Precision/Speed Spindle Structure
•Accomplishment of wide range machining by maximum 8,000RPM spindle
VX 650, VX650/50
•Super precision, high speed angular ball bearing spindle was adopted for high speed
Table Size
spindle
1,600×650mm(63″×25.6″)
•Properly applied bearing pretension strengthened rigidity, and reduced heat growth
Travel(X/Y/Z) during spindle rotates, and extended life time of bearing.
1,400×660×635mm
Spindle Torque Diagram
(55.1″×26″×25″)
VX650 (8,000rpm) Rigid Tapping (Std.)
286Nm (15min, S3 15%) Precisive and fast rigid tap function maximizes
143Nm (cont) productivity, allows high machining accuracy and extends
life time of tap tool.

TORQUE(Nm)
POWER(kW)
Table For Wide Range Machining
1,600x650 wide maximum work-piece size, and 1,300kg heavy load capability makes
this machine better than any other in its class.

650 )
6″
(25.
SPINDLE SPEED (rpm) 1,300kg
635
VX650 (10,000rpm) (2866lb) (25″)

150
(5.9″)
117.6Nm (30min, S3 60%)

95.3Nm (cont)
100 (3.9 650

TORQUE(Nm)
High Accuracy, Highly

POWER(kW)
″) (25.6″
18.5kW
)
(30min, S3 60%) 1600 (6
3″)
rigid machine structure 15kW(cont)
100

CHANGe SPeeD
The most optimized design bed, column, saddle, and (3.9″)

VOLUMe LINe
bASe SPeeD
head maintain high rigidity at any circumstance, so
distortion is extremely minimized even during heavy
duty cutting. 35

SPINDLE SPEED (rpm)

1500 4000 10000
4 Slide Ways
VX650/50 (6,000rpm) Wide four Y-axis slide ways were adopted
357.7Nm (15min, S3 15%)
to eliminate accuracy deviation due to
178.3Nm (cont)
overhang, so high precision machining is
possible even during heavy duty cutting.
■ Tool Changing Time Tool to Tool : 2.6 sec Chip to Chip : 6.6 sec

TORQUE(Nm)
POWER(kW)
highly rigid linear guide
■ Rapid Traverse Speed X, Y-axis : 36m/min (1,417ipm)
Z-axis : 30m/min (1,181ipm)
■ Spindle RPM #40 : 8,000 [10,000]rpm #50 : 6,000rpm 45。

■ Spindle Motor Output 15/11kW (20/15HP) [18.5/15 (25/20HP)] 45。

(30min/Cont.)
35 400 600 4800 6000 4-way equal load rating type
SPINDLE SPEED (rpm)

8 9
<774;0)63*<LMO
Specification
<774;0)63*<LMO Vertical Machining Center VX400/500/650
<774;0)63*<LMO  


Tool <774;0)63*<LMO


!

Shank & Pull Stud Bolt External Dimensions

!
    Unit : mm(in)
 Unit : mm(in)



!









!



!


 
 

!!



!


!


 




MAS 403 BT #40




 

VX400


 
 

!!


!
0
 

    



!
   ! 
  2,030(79.9)


!


!

  980(38.6) 1,325(52.2) 1,325(52.2) 870(34.3) 1,160(45.7)
0


!

! 

!


   
    



!





   !   







 




   ! ! 
 

881(3.5)

 

!!



!
 

!!

! 

!
 

2,917.5(114.9)
 

 
    ! 83(3.3)
!  712.5(28.1) 267.5 682 1,120(44.1) 765(30.1)
(10.5) (26.9)
0
0

    

   !  
   
   !  



2,833(111.5)
!  
!  
 
 
   !
 
 ! 

2,020(79.5)
PULL STUD

1,952(76.9)
  !

<774;0)63+)<LMO
!  

<774;0)63+)<LMO

1,522(59.9)


875(34.4)



  CAT/ANSI B5.50 No.40

<774;0)63+)<LMO 267.5
(10.5)
1,325(52.2) 1,325(52.2)
170 340 544(21.4)
2,800(110.2) (6.7) (13.4)

<774;0)63+)<LMO  

3,630(134)

!
!
 
 
 
 
 













VX500




!
!


1,065(41.9) 1,025(40.4) 710(28)

!
  


604(23.8)
!

   



!

!!   

755(29.7)
  


!!   




!
  
!  
!

 !   

 
  


  


 !   ! 



 
PULL STUD
!



  
!   !  
!!   
!

2,800(110.2)

3,160(124.4)
2,656(104.6)

2,556(100.6)
   
!  

2,045(80.5)

2,373(93.4)
 

 
!

!   !  

!!   
  

MAS 403 BT #40

!  

950(37.4)

 

 
!   !

  
1,400(55.1) 1,400(55.1)
1,505(59.3)
115 2,800(110.2) 2,800(110.2)
280(11) 2,073(81.6)
(4.5) 2,915(114.8) 3,100(122)
604(23.8) 2,361(93)

VX650
2,876(113.2) 3,500(137.8)

PULL STUD
1,050(41.3) 1,400(55.1) 1,050(41.3)
DOOROPEN

(13.2)
335
CAT/ANSI B5.50 No.40

2,960(116.5)
2,810(110.6)

2,659(104.7)
1,265(49.8)

785(30.9)
2,475(97.4)

2,045(80.5)

950(37.4)
(13.4) (17.3)
340 440
3,500(137.8)
320 550 1,828(72)
(12.6) (21.7)
PULL STUD

10 11
Specification Vertical Machining Center VX400/500/650

Table Dimensions Specification

Unit : mm(in)

ITEM VX400 VX500 VX500/50 VX650 VX650/50

Table Size mm(in) 1,000×460 (39.4×18.1) 1,200×500 (47.2×19.7) 1,600×650 (63×25.6)
Table Maximum Load Capacity kg(lb) 600 (1,323) 800 (1,764) 1,300 (2,866)
X Axis mm(in) 800 (31.5) 1,060 (41.7) 1,400 (55.1)
  
٦! Y Axis mm(in) 460 (18.1) 510 (20.1) 660 (26)
٦ 
 Feed Z Axis mm(in) 520 (20.5) 635 (25)
٦ Distance from table surface to Sp. nose mm(in) 130~650 (5.1~25.6) 150~785 (5.9~30.9)
٦  
٦ 
 
٦ VX400 Distance column to SP. center mm(in) 475 (18.7) 615 (24.2) 765 (30.1)



٦ 0
٦ Spindle Taper - NT #40 NT #50 NT #40 NT #50



Spindle RPM rpm 8,000 [12,000] 8,000 [10,000] 6,000 8,000 [10,000] 6,000
! ! !
  


 
kW 15/11[11/7.5] 15/11[18.5/15] 20/15 15/11[18.5/15] 20/15
Spindle Power Output (Max./Cont.)
Spindle HP 20/15[15/10] 20/15[25/20] 25/20 20/15[25/20] 25/20


 kgf.m 9.7/7.14[7.1/4.8] 29.2[12] 36.5/26.8 29.2[12] 36.5/26.8
 Torque
lbf-ft 70.4/51.4[51.4/34.7] 211.2[86.8] 264/193.8 211.2[86.8] 264/193.8



   Detail T-Slot

! ! ! Spindle Driving Method - Direct Driven Belt Driven
Cutting Feed Rate (X/Y/Z) m/min(ipm) 10/10/10 (394) 15/15/15 (591)
Feed Rate Rapid Feed Rate (X/Y/Z) m/min(ipm) 32 (1,260) 36/36/30 (1,417/1,417/1,181)

٦ 
٦  Number of Tools EA 24 [30] 24 24 [30] 24


  Tool Type - MAS403 BT#40 BT40 (CAT40) BT50 (CAT50) BT40 (CAT40) BT50 (CAT50)
٦   
٦ ! ٦ (W/T Adjacent Tool) mm(in) Ø90 (Ø3.5) Ø110 (Ø4.3) Ø90 (Ø3.5) Ø110 (Ø4.3)
  
 ٦  ٦  Max. Tool Dia.

 ٦
 (W/O Adjacent Tool) mm(in) Ø150 (Ø5.9) Ø200 (Ø7.9) Ø150 (Ø5.9) Ø200 (Ø7.9)
٦
٦ ٦ 
ATC Max. Tool Length mm(in) 300 (11.8)
٦
٦ 
٦  ٦
٦  8 (17.6) 15 (33.1) 8 (17.6) 15 (33.1)


Max. Tool Weight kg(lb)



!





Random


Tool Selection Method -

     

 ! ! ! ! 
     
 ! ! ! ! 
 


Tool Change Time (T-T/C-C) sec 1.8/5.9 2.6/6.6 4/8 2.6/6.6 4/8
Coolant Tank Capacity ℓ(Gal) 320 (84.5) 350 (92.5)

!
!

٦ 0
٦
Hydraulic Tank Capacity ℓ(Gal) 20 (5.3) 15 (4)
Power
Air Consumption (5kgf/cm2) ℓ/min (gal/min) 110 (29) 125 (33) 110 (29)
Source


Required Power Capacity (220V/60Hz) KVA 30


mm 3,050×2,100 2,800×2,860 3,500×2,960 4,710×2,960





      Floor Plan (L×W)



         Machine (in) (120.1×8.3) (114.6×110.2) (137.8×116.5) (185.4×116.5)

Size Machine Height mm(in) 2,833 (111.5) 2,815 (110.8) 3,040 (119.7) 2,800 (110.2) 2,871 (113)
Detail T-Slot
Machine Weight kg(lb) 5,100 (11,244) 7,700 (16,975) 9,500 (20,944)
Memory Capacity m 1,280
Controller
CNC - FANUC 0i-MD
!
   ❖ For quality and performance improvement, these specifications are subject to change without notice [ ] : Option
   

VX400

٦ 
 

Standard Option
 

٦ VX650


 ! ! ! ! ! ! 



       

٦

٦ 0 •Splash Guard •Cooling System •Chip Box •Work Measuring Device



٦


•Rigid Tapping •Spindle Through Coolant (20, 30, 70 bar) •Bed Flushing Coolant •NC Rotary Table
٦


 

•Door Interlock •Total Splash Guard •Gun Coolant •Load Meter



•Coolant System •External ATC (30EA) •Jet Coolant



•Std. Tool Kit & Box •Chip Conveyor (Rear) •Tool Broken Detection Device



 


VX500 / VX650
Detail T-Slot
Standard Option
    •Splash Guard •Spindle 10,000 rpm •External ATC (30EA) •Tool Broken Detection Device
! !
 •Rigid Tapping •Cooling System •Chip Conveyor (Side or Rear) •Work Measuring Device
•Door Interlock •Spindle Through Coolant (20, 30, 70 bar) •Chip Box •NC Rotary Table
•Coolant System •Auto Door •Gun Coolant •Load Meter
•Std. Tool Kit & Box •Total Splash Guard •Jet Coolant
•Bed Flushing Coolant •High Column (300 mm) •Oil Skimmer

12 13
Specification Vertical Machining Center VX400/500/650

Controller

FANUC 0i-MD
Controller

Axis control / Display unit Program input & Interpolation functions Auxiliary / Spindle functions
Controlled axes 3 (X/Y/Z) axes Label Skip Miscellaneous function M2 digits
Simultaneous controllable axes 3 axes (G00 & G01:3 axes, G02 & G03:2 axes) Control in/out Miscellaneous function lock
X axis:0.001mm (0.0001") Interpolation functions Positioning/Linear/Circular (G00/G01/G02/G03) Spindle speed command S5 digits, binary output
Least input increment Y axis:0.001mm (0.0001") Exact stop mode/Exact stop G61 / G09 Spindle speed override 50%~120% (10% unit)
Namsan Plant Jungdong Plant Banwol Plant Gwangju Plant
Z axis:0.001mm (0.0001") Dwell G04, 0~9999.9999sec Spindle orientation
X axis:0.001mm (0.0001") Helical interpolation Rigid tapping
Least command increment Y axis:0.001mm (0.0001") Threading/synchronous feed Tool functions / Tool compensation
Z axis:0.001mm (0.0001") Manual reference point return Tool function Max. T8 digits
Inch/Metric conversion G20 / G21 Reference point return G28 Cutter compensation C G40˜G42
Interlock Each axis / All axes Reference point return check G27 Tool length measurement
Head Office FA Plant Posung Plant Seosan Plant China Plant
Machine lock All axis 2nd Reference point return G30 Tool length compensation G43, G44, G49
Emergency stop 3rd, 4th Reference point return Tool offset amount +/- 6 digits Head Office & Factory Seoul Office
Stored stroke check1,2,3 Program stop/end M00, M01 / M02, M30 Tool offset pairs 400 pairs
391-8 Kaumjung-Dong, Changwon, Gyeongnam, Korea 10th Floor Landmark Tower 837-36, Yeoksam Dong,
TEL : +82 55 280 9114, FAX : +82 55 282 9680 Gangnam-Gu, Seoul, Korea
Mirror image Tape code EIA RS-244/ISO 840 (Automatic recognition) Tool life management
http : //www.hyundai-wia.com, E-mail : trade@hyundai-wia.com TEL : +82 2 2112 8451, FAX : +82 2 2112 8400
Follow-up Optional block skip 1 ea Data input / Output & Editing functions
Servo off Max. programmable dimensions +/- 9999.9999 (+/- 8digits) Reader/Puncher interface RS232C HYUNDAI-KIA AMERICA CORP. CHINA Beiging Office
Backlash compensation +/- 0~9999 pulse (rapid traverse & cutting feed) Program number O4 digit Memory card input/output 30 Murray Hill Parkway, Suite 300. East Ruthergord, NJ 07073 U.S.A. Room 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing China 100027
Position switch Absolute/incremental command G90 / G91 Part program storage length 1280m (512Kbyte) TEL : +1 201 489 2887 FAX : +1 201 489 2723 TEL : +86 10 8453 9850~2 FAX : +86 10 8453 9853
Stored pitch error compensation Decimal point input Registered programs 400 ea http ://www.hyundai-kiamachine.com E-mail : sangho@hyundai-wia.com
LCD/MDI 8.4" color LCD Plane selection G17,G18,G19 Memory lock E-mail : sales@hyundai-kiamachine.com Sanghai Office
Operation Work coordinate system setting G52~G59 Back ground editing Chicago Office Room 501 Ocular B/D, No.1366 Wu Zhong Road, 201103 Shanghai, Chian
Automatic operation (memory) Work coordinate preset Extended part program editing Copy, move, change of NC program 751 Landmeier Rd. Elk Grove Village, IL 60007 U.S.A. TEL : +86 21 3431 0370~2 FAX : +86 21 3431 0376
MDI operation Additional work coordinate system 48 pairs Setting, display, diagnosis TEL : +1 847 640 8870(#201) FAX : +1 847 640 8701 E-mail : ymlee@hyundai-wia.com
Search function sequence, program Manual absolute "On" fixed Self-diagnosis function http ://www.hyundai-kiamachine.com Guangzhou Office
Program restart Programmable data input G10 History display Alarm & operator message E-mail : sales@hyundai-kiamachine.com Room 906, International Finance Place, No.8 Huaxia Road, Pearl River New
Dry run Sub program call 4 levels of nesting Help function L.A Office Town, Tianhe District, Guangzhou, China, 510623
Single block Custom macro Run hour/Parts count display 11155 Knott Ave, Suit F, Cypress, CA 90630 U.S.A TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597
Buffer register Addition to custom macro common variables #100~#199, #500~#999 Actual cutting feedrate display
TEL : +1 714 373 5480 FAX : +1 714 373 5485 E-mail : iclee@hyundai-wia.com
Handle interrupt Circular interpolation Spindle/Servo setting screen
http ://www.hyundai-kiamachine.com Chengdu Office
E-mail : sales@hyundai-kiamachine.com Room 2103, Block A, Times Plaza, Zongfu Road, Chengdu, China 610016
Feed functions Canned cycle G73, G74, G76, G80~G89 Multi-language display
Argentina Office TEL : +86 28 8665 5550 FAX : +86 28 8665 2985
Manual jog feed Rapid, Jog, handle Optional chamfering/corner R Erase LCD screen display Screen saver
AV, Alicia Moreau de Justo 1848 of 4-6 Puerto Madero(C1107AFL). E-mail : nlee@hyundai-wia.com
Manual handle feed-rate x1, x10, x100 Skip function G31 Option
Buenos Aires, Argentina Wuhan Office
Feed command F code feedrate direct command Automatic coordinate system setting Additional 1 Axis
TEL : +54 11 4313 1917 FAX : +54 11 4313 1929 Room 43-05, New World International Trade Building(Wuhan) No.568 Jianshe
Feedrate override 0~200% (10% Unit) Coordinate system rotation Manual Guide i With 10.4" color LCD
http ://www.hyundai-kiamachine.com Avenue, Jianghan District, Hankou, Wuhan, Hubei 430022
Jog feed 0~5,000 mm/min (197 ipm) Programmable mirror image Dynamic graphic display
E-mail : sales@hyundai-kiamachine.com TEL : +86 - 27 - 5952- 3256~7 FAX : +86 - 27 - 5952 - 3258
Rapid traverse override F0, F25%, F50%, F100% Single direction positioning G60 Optional block skip add 9 ea (Application can be limited)
HYUNDAI-KIA EUROPE GmbH E-mail : bhyun@hyundai-wia.com
Override cancel External data input Tool offset/message/machine zero point shift AI contour control (AICC)
Kaiserleipromenade 5, D-63067 Offenbach,Germany Qingdao Office
Rapid traverse bell-shaped Cylindrical interpolation Data server
TEL : +49 69 271 472700 FAX : +49 69 271 472719 Room 1207, Zhaoyin Building, 36 Hongkong Middle Road, Qungdao,
acceleration/deceleration AI advanced preview control G5.1 FAST Ethernet
http ://www.hyundai-kia.de shandong 266071, China
Auto corner override Polar coordinate command DNC operation
E-mail : sales@hyundai-kia.de TEL : +86 - 532 - 8667-9333~5 FAX : +86 - 532 - 8667-9338
• Figures in inch are converted from metric values. Raunheim Service Center E-mail : parkpal@hyundai-wia.com
• Design and specifications subject to change without notice. Kelsterbacher Str. 38-46 D-65479 Raunheim, Germany INDIA India Office
TEL : +49 6142 834 0 FAX : +49 6142 834 100 6B, EGA Trade Center, 809 Poonamallee High Load, Kilpauk,
http ://www.hyundai-kia.de Chennai - 600 010. Tamilnadu, India
E-mail : service@hyundai-kia.de TEL : +91 44 4305 7112 FAX : +91 44 4305 7116
E-mail : bikehyk@hyundai-wia.com
※ Specifications are subject to change for improvement without notice.

14 15