Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
0% found this document useful (0 votes)
125 views

PIle Capacity Alpha Beta Method

The document provides calculations to determine the bearing capacity of a pile foundation. It includes soil properties from SPT tests with depth, calculations of unit side resistance and end bearing values, and summation of these values to determine the total and allowable bearing capacities. The pile has a diameter of 20 inches, length of 70 feet, and factor of safety of 3. Calculations are shown in a table with depth and soil parameters, as well as the resulting resistance and bearing capacity values.

Uploaded by

masud parveg
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
125 views

PIle Capacity Alpha Beta Method

The document provides calculations to determine the bearing capacity of a pile foundation. It includes soil properties from SPT tests with depth, calculations of unit side resistance and end bearing values, and summation of these values to determine the total and allowable bearing capacities. The pile has a diameter of 20 inches, length of 70 feet, and factor of safety of 3. Calculations are shown in a table with depth and soil parameters, as well as the resulting resistance and bearing capacity values.

Uploaded by

masud parveg
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

AASHTO (O' Neill & Hasan Modified Beta method)

dia 20 inch
Length 70 Feet
F.S. 3

Ultimat Allowa
SPT Corrected Unit side Side e lble
Depth Value SPT Value sigma resistance Resistance Capaci Capaci
ft N Nc Beta (ton) fs(TSF) Qs(ton) Qs(cumilitQp ty(ton) ty (ton)
5 2 2 1.2 0.1 0.0 0.3 0.3 2.6 2.9 1.0
10 2 2 1.1 0.2 0.0 0.9 1.2 2.6 3.8 1.3
15 3 3 1.0 0.4 0.1 2.0 3.2 3.9 7.1 2.4
20 4 4 0.9 0.5 0.1 3.4 6.6 5.2 11.9 4.0
25 4 4 0.8 0.7 0.2 4.0 10.7 5.2 15.9 5.3
30 6 6 0.8 0.9 0.3 6.8 17.5 7.9 25.4 8.5
35 10 10 0.7 1.0 0.5 12.4 30.0 13.1 43.0 14.3
40 11 11 0.6 1.2 0.6 14.5 44.5 14.4 58.9 19.6
45 12 12 0.6 1.3 0.6 16.5 61.0 15.7 76.7 25.6
50 18 16.5 0.5 1.5 0.8 21.2 82.2 21.6 103.8 34.6
55 21 18 0.5 1.6 0.8 21.4 103.6 23.6 127.2 42.4
60 24 19.5 0.5 1.8 0.8 21.4 125.0 25.5 150.5 50.2
65 26 20.5 0.4 2.0 0.8 21.0 146.1 26.8 172.9 57.6
70 28 21.5 0.4 2.1 0.8 20.5 166.5 28.1 194.7 64.9
75 28 21.5 0.33 2.27 0.75 19.62 186.14 28.14 214.28 71.43
80 28 21.5 0.29 2.42 0.71 18.55 204.69 28.14 232.82 77.61
85 28 21.5 0.26 2.58 0.66 17.24 221.92 28.14 250.06 83.35
90 28 21.5 0.25 2.73 0.68 17.90 239.82 28.14 267.96 89.32
95 26 20.5 0.25 2.89 0.72 18.92 258.74 26.83 285.57 95.19
100 30 22.5 0.25 3.05 0.76 19.94 278.68 29.45 308.12 102.71
105 28 21.5 0.25 3.20 0.80 20.96 299.64 28.14 327.78 109.26
110 33 24 0.25 3.36 0.84 21.99 321.63 31.41 353.04 117.68
115 35 25 0.25 3.52 0.88 23.01 344.64 32.72 377.36 125.79
120 30 22.5 0.25 3.67 0.92 24.03 368.67 29.45 398.12 132.71
Pile
capacity
(ton) Factor of
Point Grid No Load FZ (Kip) No of pile FS=3.0 safety Comments
1 5A WSD 285.6692 2 71.43 3.00 ok
2 5B WSD 393.825 3 71.43 3.26 ok
3 5C WSD 422.0558 4 71.43 4.06 ok
4 5D WSD 524.5502 4 71.43 3.27 ok
5 5E WSD 405.3986 4 71.43 4.23 ok
6 5F WSD 269.2503 2 71.43 3.18 ok
7 5G WSD 410.6088 2 71.43 2.09 Not Ok
8 1A WSD 247.4436 2 71.43 3.46 ok
9 2A WSD 141.2335 2 71.43 6.07 ok
10 3A WSD 245.7494 2 71.43 3.49 ok
11 3B WSD 459.0791 3 71.43 2.80 ok
12 3C WSD 502.4351 4 71.43 3.41 ok
13 3D WSD 614.7663 4 71.43 2.79 ok
14 3E WSD 572.6349 4 71.43 2.99 ok
15 3G WSD 488.3691 2 71.43 1.76 Not Ok
16 4F WSD 305.3047 3 71.43 4.21 ok
17 4G WSD 334.8704 2 71.43 2.56 OK
18 1G WSD 475.1584 3 71.43 2.71 ok
19 1E WSD 454.11 4 71.43 3.78 ok
20 1D WSD 435.9802 4 71.43 3.93 ok
21 1C WSD 491.6875 4 71.43 3.49 ok
Point FZ
1 285.6692
2 393.825
3 422.0558
4 524.5502
5 405.3986
6 269.2503
7 410.6088
8 247.4436
9 141.2335
10 245.7494
11 459.0791
12 502.4351
13 614.7663
14 572.6349
15 488.3691
16 305.3047
17 334.8704
18 475.1584
19 454.11
20 435.9802
21 491.6875
Depth of each layer(Li) 5 ft
Dia of pile 20 in
F.S 2.5

Depth Zi SPT Corrected Beta Corr. Beta qs Corr. qs Qs Cum. Qs Qe Qt=Qs+Qe Qall
ft ft SPT factor factor ksf ksf Kip Kip Kip Kip Kip
5 0 1 1 0.1 0.25 0.00 0 0 0 0 0 0
10 7.5 2 2 0.15 0.25 0.12 0.12 3.07 3.07 5.23 8.30 3.32
15 12.5 2 2 0.14 0.25 0.20 0.20 5.11 8.18 5.23 13.41 5.36
20 17.5 3 3 0.19 0.25 0.27 0.27 7.15 15.33 7.85 23.18 9.27
25 22.5 5 5 0.29 0.2865463 0.40 0.40 10.54 25.88 13.08 38.96 15.58
30 27.5 6 6 0.32 0.3168216 0.54 0.54 14.25 40.12 15.70 55.82 22.33
35 32.5 7 7 0.34 0.34 0.69 0.69 18.12 58.24 18.32 76.56 30.62
40 37.5 14 14 0.63 0.63 1.47 1.47 38.54 96.78 36.63 133.41 53.37
45 42.5 16 15.5 0.66 0.66 1.76 1.76 45.96 142.74 40.56 183.30 73.32
50 47.5 18 16.5 0.68 0.68 2.03 2.03 53.10 195.83 43.18 239.01 95.60
55 52.5 22 18.5 0.77 0.77 2.51 2.51 65.71 261.55 48.41 309.96 123.98
60 57.5 36 25.5 0.48 0.48 1.71 1.71 44.79 306.34 66.73 373.06 149.23
65 62.5 42 28.5 0.43 0.43 1.69 1.69 44.23 350.57 74.58 425.14 170.06
70 67.5 46 30.5 0.39 0.39 1.65 1.65 43.15 393.72 79.81 473.53 189.41
75 72.5 49 32 0.35 0.35 1.59 1.59 41.56 435.28 83.73 519.01 207.60
80 77.5 58 36.5 0.31 0.31 1.51 1.51 39.49 474.76 95.51 570.27 228.11
85 82.5 22 18.5 0.27 0.27 1.41 1.41 36.94 511.70 48.41 560.11 224.05
90 87.5 23 19 0.24 0.25 1.37 1.37 35.77 547.48 49.72 597.20 238.88

Zi=Midpoint depth from EGL of each layer


Beta Factor
вi=(1.5-.135√Zi) when N>15
вi=(N/15)(1.5-.135√Zi) when N<15
вi is also limited in between 0.25 to 1.2
qs(unit side resistance) =Effective Vertical stress*Bi ; but not more than 4.2ksf
Qs(Side resistance in each layer)=3.14*D*Li*Bi* бvi
Qe(End Bearing)=1.2*Nc*3.14*D^2/4
Qt(Total Bearing Capacity)=Qs+Qe
Qall(Allowable Bearing Capacity)=Qt/F.S

You might also like