Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Product Data: LAN & SCSI Interface Module - Type 7532/UA 1342

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Product Data

LAN & SCSI Interface Module — Type 7532/UA 1342


Part of Intelligent Data Acquisition System Type 3561

USES: ❍ Real-time distribution of global tacho signals


❍ High-speed LAN interconnection between frames of between multiple frames for, e.g., order tracking
Intelligent Data Acquisition (IDA) System Type 3561 ❍ 700 kbyte/s data flow rate (LAN interface, effective
❍ Gap-free data throughput to external disk with data throughput, sequential transmission) for a
optional SCSI-2 Connector UA 1342, for example single frame. Data transmission increases per
for very long time records added frame up to saturation limit
❍ Complies with industrial standard for Ethernet II,
IEEE – 802.3 10 base 2
FEATURES: ❍ Sampling clock and synchronization input/output
❍ Built-in sampling and synchronization generator to/from IDA controller modules
❍ LED indicators for transmit, receive, clock and
system synchronization

LAN & SCSI Interface Module ❍ Synchronization Input: BNT sock-


Type 7532 et, for input from Synchronization
This is a high-speed LAN interface Module Type 7530
module which provides the interface ❍ Clock Output: BNT socket, for
between Intelligent Data Acquisition clock output to the LAN Interface
(IDA) system frames and the Local Module in the next Type 3561
Area Network. The module provides frame in the system
the connection between the host com- ❍ Synchronization Output: BNT
puter or an external disk and every socket, for synchronization output
frame in the IDA system (max. cable to the LAN Interface Module in
length 185 m). An interface module is the next Type 3561 frame in the
required for each frame in the sys- system
❍ RS – 232 serial interface connector.
tem. The interface complies with the
industrial standard for ETHERNET This is a 9-pin male D-range con-
nector, conforming to the RS – 232
II, IEEE – 802.3 10, with TCP/IP pro-
standard for connection to a termi-
tocol and has an effective data flow
nal or other Data Terminal Equip-
of 700 kbytes/s for one frame*.
ment via a null-modem. Uses
When only a software trigger is include system initialization,
needed, for example with the Spatial frame configuration and start of
Transformation of Sound Fields Ap- self-test.
plication (Type 7688), synchroniza- The module has four 3 mm green
tion and sample clock are generated LEDs:
internally in Type 7532. ❍ Data Transmit
The LAN Interface Module is ❍ Data Receive and a TIM 40 module and allows
equipped with the following inputs ❍ Clock Active throughput to disk of very long time
and outputs: ❍ Synchronization Active signals (data). The kit is mounted on
❍ Clock Input: BNT socket, for clock the side of Type 7532 as shown in the
input from Synchronization Mod- SCSI Connector UA1342 photograph.
ule Type 7530 SCSI Interface UA 1342 is available The throughput rate is 2.8 Mbyte/s,
as an accessory to Type 7532. The kit corresponding to 42 channels at a
* See LAN output data rate in specifications comprises 2 wide SCSI -2 connectors sampling frequency of 32.768 kHz.

Brüel & Kjær B K


Specifications 7532
LAN OUTPUT: SAMPLING SYNCHRONIZATION INPUT: Voltage Range:
Connector: BNC connector complying with the Type: BNT socket, receives synchronization in- 0 V < Vout, low < 0.5 V
industrial standard for Ethernet II, IEEE–802.3 put from Synchronization Module Type 7530 2.4 V < Vout, high < 5 V
10 base 2 Input Range: 0 to 5 V
Protocol: TCP/IP Input Impedance: Approx. 4 kΩ INDICATORS:
Data Rate: 700 kbyte/s (effective data through- LEDs (3 mm): Receive/transmit, sync., clock ac-
put, sequential transmission, LAN interface) for SAMPLING CLOCK OUTPUT: tive
one frame. When using more than one frame, Type: BNT socket
and a host computer with a multi-tasking oper- Protection: Output is protected against short- POWER SUPPLY:
ating system, then the frames can transfer data circuit Power Supply Module Type 2823
“simultaneously”. A single LAN interface module Impedance: 75 Ω Power Consumption: Approx. 7 W (max.)
does not saturate the net. Therefore, when using Voltage Range: With UA 1342, approx. 15 W (max.)
more than one frame, the data transmission rate 0 V < Vout, low < 0.5 V
will increase, up to the point of saturation 2.4 V < Vout, high < 5 V DIMENSIONS:
System Frequency Range: Type 3561 module dimensions
SERIAL INTERFACE: 2.097152 MHz to 33.554432 MHz Height: 134.0 mm (5.28 in)
RS–232, fulfilling EIA–562 (electrical) and Sample Rate Generator: When using, e.g., 6- Length: 42.5 mm (1.67 in)
EIA–574 (mechanical). For configuration read- channel Recording Modules Types 3025, 3026, Width: 230 mm (9.06 in)
out and self-test purposes via, e.g., a VT 220 3030, the resulting sampling frequency will cover Weight: 1.1 kg (2.4 lb.)
terminal the range from 1024 to 65536 Hz
Trigger: Software controlled via application soft- COMPLIANCE WITH STANDARDS:
SAMPLING CLOCK INPUT: ware
Type: BNT socket receives clock input from Syn- When incorporated into Intelligent
chronization Module Type 7530 SAMPLING SYNCHRONIZATION OUTPUT: Data Acquisition System Type 3561,
Input Range: 0 to 5 V Type: BNT socket Type 7532 or 7532 + UA 1342
Input Impedance: Approx. 4 kΩ Protection: Output is protected against short- complies with the system standards
circuit stated in the Product Data for Type
3561 (BP 1447)
Impedance: 75 Ω

Specifications UA 1342
SCSI OUTPUT UA 1342 POWER SUPPLY: COMPLIANCE WITH STANDARDS:
Connector: 68-pole wide SCSI-2 interface to See specifications for Type 7532 See specifications for Type 7532
external disk, in accordance with ANSI X3T9.2
X3.131 Small Computer System Interface 2 DIMENSIONS:
Effective Sustained Data Rate: 2.8 Mbyte/s As specifications for Type 7532

Ordering Information
Optional Accessories: AO 0087: Screened BNC Connection Cable JJ 0152: BNT Adaptor
(1.2 m) UA 1342: SCSI Connector for throughput to
AO 1386: 9-pole to 9-pole shielded null AO 0130: Screened BNC Connection Cable disk
modem cable with 9-pole to 25- (0.6 m) WL 0235: Triaxial Cable (x m)
pole adaptor AO 0142: Screened BNC Connection Cable
AO 0451: Triaxial Cable (0.2 m) (3.0 m)
AO 0158: Triaxial Cable (3 m) JP 0069: Terminator

Brüel&Kjær reserves the right to change specifications and accessories without notice

Brüel & Kjær B K

WORLD HEADQUARTERS:
DK-2850 Naerum · Denmark · Telephone: +45 45 80 05 00 · Fax: +45 45 80 14 05 · Internet: http://www.bk.dk · e-mail: info@bk.dk
Australia (02 ) 9450-2066 · Austria 00 43-1-865 74 00 · Belgium 016/44 92 25 · Brazil (011) 246-8166 · Canada: (514) 695-8225 · China 10 6841 9625 / 10 6843 7426
Czech Republic 02-67 021100 · Finland 90-229 3021 · France (01) 69 90 69 00 · Germany 0610 3/908-5 · Holland (0)30 6039994 · Hong Kong 254 8 7486
Hungary (1) 215 83 05 · Italy (02) 57 60 4141 · Japan 03-3779-8671 · Republic of Korea (02) 3473-0605 · Norway 66 90 4410 · Poland (0-22) 40 93 92 · Portugal (1) 47114 53
Singapore (65) 275-8816 · Slovak Republic 07-37 6181 · Spain (91) 36810 00 · Sweden (08) 71127 30 · Switzerland 01/94 0 09 09 · Taiwan (02) 713 9303
United Kingdom and Ireland (0181) 954-236 6 · USA 1 - 800 - 332 - 2040
Local representatives and service organisations worldwide
BP 1630 – 11 96/03

You might also like