9.2.9 Packet Tracer - Examine The Arp Table PDF

Packet Tracer - Examine the ARP Table
Addressing Table
Device Interface MAC Address Switch Interface
Router0 Gg0/0 0001.6458.2501 G0/1
Router0
S0/0/0 N/A N/A
Router1 G0/0 00E0.F7B1.8901 G0/1
Router1
S0/0/0 N/A N/A
10.10.10.2 Wireless 0060.2F84.4AB6 F0/2
10.10.10.3 Wireless 0060.4706.572B F0/2
172.16.31.2 F0 000C.85CC.1DA7 F0/1
172.16.31.3 F0 0060.7036.2849 F0/2
172.16.31.4 G0 0002.1640.8D75 F0/3
Objectives
Part 1: Examine an ARP Request
Part 2: Examine a Switch MAC Address Table
Part 3: Examine the ARP Process in Remote Communications
Background
This activity is optimized for viewing PDUs. The devices are already configured. You will gather PDU
information in simulation mode and answer a series of questions about the data you collect.
Instructions
Part 1: Examine an ARP Request

Step 1: Generate ARP requests by pinging 172.16.31.3 from 172.16.31.2.
Open a command prompt
a. Click 172.16.31.2 and open the Command Prompt.

b. Enter the arp -d command to clear the ARP table.
Close a command prompt
c. Enter Simulation mode and enter the command ping 172.16.31.3. Two PDUs will be generated. The
ping command cannot complete the ICMP packet without knowing the MAC address of the destination.
So the computer sends an ARP broadcast frame to find the MAC address of the destination.
d. Click Capture/Forward once. The ARP PDU moves Switch1 while the ICMP PDU disappears, waiting
for the ARP reply. Open the PDU and record the destination MAC address.
Question:
Is this address listed in the table above?

Type your answers here.
© 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 3 www.netacad.com
e. Click Capture/Forward to move the PDU to the next device.

Question:
How many copies of the PDU did Switch1 make?

What is the IP address of the device that accepted the PDU?
f. Open the PDU and examine Layer 2.
Question:
What happened to the source and destination MAC addresses?

g. Click Capture/Forward until the PDU returns to 172.16.31.2.
Question:
How many copies of the PDU did the switch make during the ARP reply?
Step 2: Examine the ARP table.

a. Note that the ICMP packet reappears. Open the PDU and examine the MAC addresses.
Question:
Do the MAC addresses of the source and destination align with their IP addresses?
b. Switch back to Realtime and the ping completes.
c. Click 172.16.31.2 and enter the arp –a command.
Question:
To what IP address does the MAC address entry correspond?

In general, when does an end device issue an ARP request?
Part 2: Examine a Switch MAC Address Table

Step 1: Generate additional traffic to populate the switch MAC address table.
a. From 172.16.31.2, enter the ping 172.16.31.4 command.

b. Click 10.10.10.2 and open the Command Prompt.
c. Enter the ping 10.10.10.3 command.
Question:
How many replies were sent and received?

Step 2: Examine the MAC address table on the switches.

a. Click Switch1and then the CLI tab. Enter the show mac-address-table command.
Question:
Do the entries correspond to those in the table above?

b. Click Switch0, then the CLI tab. Enter the show mac-address-table command.
Questions:
Do the entries correspond to those in the table above?

Why are two MAC addresses associated with one port?
Part 3: Examine the ARP Process in Remote Communications

Step 1: Generate traffic to produce ARP traffic.
a. Click 172.16.31.2 and open the Command Prompt.

b. Enter the ping 10.10.10.1 command.
c. Type arp –a.
Question:
What is the IP address of the new ARP table entry?

d. Enter arp -d to clear the ARP table and switch to Simulation mode.
e. Repeat the ping to 10.10.10.1.
Question:
How many PDUs appear?

f. Click Capture/Forward. Click the PDU that is now at Switch1.

Question:
What is the target destination IP destination address of the ARP request?

g. The destination IP address is not 10.10.10.1.
Question:
Why?
Step 2: Examine the ARP table on Router1.

a. Switch to Realtime mode. Click Router1 and then the CLI tab.
b. Enter privileged EXEC mode and then the show mac-address-table command.
Question:
How many MAC addresses are in the table? Why?
c. Enter the show arp command.

Questions:
Is there an entry for 172.16.31.2?

What happens to the first ping in a situation where the router responds to the ARP request?
End of document

9.2.9 Packet Tracer - Examine The Arp Table PDF

Uploaded by

Copyright:

Available Formats

9.2.9 Packet Tracer - Examine The Arp Table PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

9.2.9 Packet Tracer - Examine The Arp Table PDF

Uploaded by

Copyright:

Available Formats

Packet Tracer - Examine the ARP Table

Router0 Gg0/0 0001.6458.2501 G0/1

Part 1: Examine an ARP Request

a. Click 172.16.31.2 and open the Command Prompt.

Is this address listed in the table above?

e. Click Capture/Forward to move the PDU to the next device.

How many copies of the PDU did Switch1 make?

What happened to the source and destination MAC addresses?

Step 2: Examine the ARP table.

To what IP address does the MAC address entry correspond?

Part 2: Examine a Switch MAC Address Table

a. From 172.16.31.2, enter the ping 172.16.31.4 command.

How many replies were sent and received?

Step 2: Examine the MAC address table on the switches.

Do the entries correspond to those in the table above?

Do the entries correspond to those in the table above?

Type your answers here.

Part 3: Examine the ARP Process in Remote Communications

a. Click 172.16.31.2 and open the Command Prompt.

What is the IP address of the new ARP table entry?

How many PDUs appear?

f. Click Capture/Forward. Click the PDU that is now at Switch1.

What is the target destination IP destination address of the ARP request?

Type your answers here.

Step 2: Examine the ARP table on Router1.

How many MAC addresses are in the table? Why?

Type your answers here.

c. Enter the show arp command.

Is there an entry for 172.16.31.2?

You might also like