BN-DS-C58 90 Degree Three Weld Long Radius

Miter Elbow
Last Updated: 01 October 2013
Overall dimensions of a three weld 90 degree long radius miter elbow

NOM. A B C (1) D (1) NOM. A B C (1) D (1)

DIA. DIA.
MIN (3) LR.ELL. MIN (3) LR.ELL.
DIM. DIM.
3” 114 114 60 84 13 74” 2391 2819 1511 2064 251
4” 152 152 83 111 16 76” 2454 2896 1553 2119 259
6” 229 229 124 167 22 78” 2515 2972 1592 2175 265
8” 305 305 165 222 29 80” 2578 3048 1634 2232 271
10” 381 381 203 279 37 82” 2642 3124 1675 2288 279
12” 457 457 244 351 43 84” 2705 3200 1715 2343 286
14” 514 533 286 391 48 86” 2769 3277 1756 2399 292
16” 603 610 327 449 54 88” 2832 3353 1797 2454 300
18” 641 686 368 502 62 90” 2892 3429 1838 2510 306
20” 705 762 410 557 68 92” 2953 3505 1878 2565 313
24” 832 914 489 670 81 94” 3016 3581 1919 2621 319
26” 895 991 530 729 89 96” 3079 3658 1961 2678 327
28” 953 1067 572 781 95 98” 3143 3734 2000 2734 333
30” 1016 1143 613 837 102 100” 3206 3810 2042 2789 340
32” 1086 1219 654 892 110 102” 3270 3886 2083 2845 348
34” 1143 1298 695 948 119 104” 3330 3962 2124 2900 354
 36” 1207 1372 737 1003 122 106” 3381 4039 2164 2956 360
38” 1270 1448 775 1060 129 108” 3429 4115 2189 3011 365
40” 1334 1524 816 1116 137 110” 3521 4191 2246 3070 375
42” 1391 1600 857 1172 143 112” 3581 4267 2288 3124 381
44” 1454 1676 898 1227 149 114” 3645 4343 2327 3180 387
46” 1518 1753 940 1283 157 116” 3708 4420 2369 3236 395
48” 1581 1829 981 1338 164 118” 3769 4496 2410 3291 402
50” 1645 1905 1022 1394 170 120” 3829 4572 2450 3346 408
52” 1768 1981 1060 1451 178 122” 3892 4648 2491 3402 416
54” 1784 2057 1102 1507 184 124” 3956 4724 2532 3457 422
56” 1829 2134 1143 1562 191 126” 4019 4801 2572 3515 429
58” 1892 2210 1184 1618 197 128” 4039 4877 2615 3570 435
60” 1956 2286 1226 1673 205 130” 4146 4953 2654 3626 443
62” 2019 2362 1267 1729 211 132” 4191 5029 2696 3682 449
64” 2083 2438 1308 1784 221 134” 4270 5105 2735 3737 457
66” 2146 2515 1346 1835 225 136” 4331 5182 2778 3795 462
68” 2210 2591 1387 1897 232 138” 4375 5258 2818 3848 470
70” 2267 2667 1429 1953 238 140” 4439 5334 2858 3905 476
72” 2330 2743 1470 2008 224
NOTES:

1. “C” AND “D” DIMENSIONS ARE APPROXIMATE. DO NOT USE FOR FABRICATION.
2. THESE MITER ELBOW ARE TO BE USED ONLY WHEN AUTHORISED BY THE PIPING SPEC’S FOR THE JOB.
3. USE “A” MINIMUM DIMENSION ONLY WHERE NECESSARY TO MEET CLOSE CLEARANCE REQUIREMENTS.
4. USE BUTT-WELD “A” ONLY WHERE NECESSARY TO CONNECT TO FLANGE OF FITTING. USE MITER WELD FOR PIPE CONNECTION.
5. MATERIAL SHALL BE AS SPECIFIED IN THE JOB PIPING MATERIALS SPECATION CLASS.
6. WELDING SHALL BE IN ACCORDANCE WITH JOB SPECIFICATIONS C-2 OR C-5.
BN-DS-C59 90 Degree Three Weld Short Radius
Miter Elbow
Last Updated: 01 October 2013
Overall dimensions of a 90 degree three weld short radius miter elbow

NOM. A B C (1) D (1) NOM. A B C (1) D (1)

DIA. DIA.
MIN (3) LR.ELL. MIN (3) LR.ELL.
DIM. DIM.
8” 203 203 108 149 29 76” 1746 1930 1035 1413 259
10” 254 254 137 156 37 78” 1791 1981 1062 1451 265
12” 305 305 165 222 43 80” 1835 2032 1089 1487 271
14” 356 356 191 260 48 82” 1880 2083 1116 1524 279
16” 406 406 219 297 54 84” 1924 2134 1143 1562 286
18” 457 457 244 338 62 86” 1969 2184 1172 1599 292
20” 508 508 273 371 68 88” 2013 2235 1199 1637 298
24” 610 610 327 446 82 90” 2057 2286 1226 1673 306
26” 648 660 356 483 89 92” 2099 2337 1253 1710 313
28” 692 711 381 521 95 94” 2146 2388 1280 1748 321
30” 737 762 410 557 102 96” 2188 2438 1307 1784 327
32” 781 813 435 595 110 98” 2235 2489 1334 1822 333
34” 826 864 464 632 116 100” 2273 2540 1362 1859 340
36” 870 914 489 670 122 102” 2321 2591 1387 1897 348
38” 914 965 518 706 129 104” 2362 2642 1416 1934 354
 40” 959 1016 546 743 137 106” 2407 2692 1443 1972 360
42” 1003 1067 572 781 143 108” 2451 2743 1470 2008 367
44” 1048 1118 600 818 149 110” 2496 2794 1497 2045 375
46” 1092 1168 625 856 157 112” 2540 2845 1524 2083 381
48” 1137 1219 654 892 164 114” 2584 2896 1553 2119 387
50” 1181 1270 679 930 170 116” 2629 2946 1580 2156 395
52” 1226 1321 708 967 178 118” 2673 2997 1607 2194 402
54” 1264 1372 737 1003 184 120” 2718 3048 1634 2230 408
56” 1308 1422 762 1041 191 122” 2762 3099 1659 2269 416
58” 1353 1473 791 1078 197 124” 2804 3150 1685 2305 422
60” 1397 1524 816 1116 205 126” 2845 3200 1715 2343 429
62” 1441 1575 845 1152 211 128” 2889 3251 1741 2380 435
64” 1486 1626 870 1191 217 130” 2937 3302 1768 2418 443
66” 1530 1676 899 1227 225 132” 2978 3353 1797 2454 449
68” 1575 1727 927 1264 232 134” 3023 3404 1822 2491 456
70” 1619 1778 953 1302 238 136” 3067 3454 1851 2529 462
72” 1664 1829 981 1338 244 138” 3112 3505 1878 2565 470
74” 1702 1880 1008 1376 251 140” 3156 3556 1992 2602 476
NOTES:

1. “C” AND “D” DIMENSIONS ARE APPROXIMATE. DO NOT USE FOR FABRICATION.
2. THESE MITER ELBOW ARE TO BE USED ONLY WHEN AUTHORISED BY THE PIPING SPEC’S FOR THE JOB.
3. USE “A” MINIMUM DIMENSION ONLY WHERE NECESSARY TO MEET CLOSE CLEARANCE REQUIREMENTS.
4. USE BUTT-WELD “A” ONLY WHERE NECESSARY TO CONNECT TO FLANGE OF FITTING. USE MITER WELD FOR PIPE CONNECTION.
5. MATERIAL SHALL BE AS SPECIFIED IN THE JOB PIPING MATERIALS SPECATION CLASS.
6. WELDING SHALL BE IN ACCORDANCE WITH JOB SPECIFICATIONS C-2 OR C-5.
BN-DS-C60 90 Degree Five Weld Long Radius
Miter Elbow
Last Updated: 01 October 2013
Overall dimensions of a five weld 90 degree long radius miter elbow

DIA. A
NOM. B C (1) D (1) NOM. A B C (1) D (1)

MIN. LR. (3)

ELL. ELL.
DIM. DIM.
3” 533 533 168 449 6 74” 2604 2819 894 2373 149
4” 508 508 160 427 8 76” 2667 2896 914 2473 152
6” 533 533 168 449 13 78” 2737 2972 941 2500 157
8” 610 610 194 513 16 80” 2800 2997 965 2565 160
10” 635 635 202 535 21 82” 2870 3124 991 2629 165
12” 610 610 194 513 25 84” 2940 3200 1013 2694 168
14” 711 711 225 598 29 86” 3010 3277 1038 2757 173
16” 813 813 257 684 32 88” 3073 3353 1062 2821 176
18” 914 914 289 770 37 90” 3143 3429 1086 2886 181
20” 762 762 241 641 40 92” 3213 3505 1110 2950 184
24” 895 914 289 770 48 94” 3277 3581 1135 3015 189
26” 865 991 314 833 52 96” 3346 3658 1159 3078 194
28” 1035 1067 338 899 56 98” 3417 3734 1183 3141 197
30” 1099 1143 362 932 60 100” 3486 3810 1207 3206 202
32” 1168 1219 386 926 65 102” 3537 3886 1230 3270 205
34” 1238 1295 410 1091 68 104” 3620 3962 1256 3335 210
36” 1314 1372 435 1154 73 106” 3689 4039 1280 3399 213
 38” 1372 1448 459 1219 76 108” 3759 4115 1303 3462 217
40” 1435 1524 483 1283 81 110” 3823 4191 1327 3527 221
42” 1511 1600 506 1346 84 112” 3892 4267 1351 3591 225
44” 1581 1676 532 1411 89 114” 3962 4343 1376 3654 229
46” 1645 1753 556 1475 92 116” 4026 4420 1400 3719 233
48” 1721 1829 579 1540 97 118” 4095 4496 1424 3783 237
50” 1784 1905 603 1603 100 120” 4166 4572 1456 3848 241
52” 1842 1981 627 1667 105 122” 4235 4648 1473 3912 244
54” 1918 2057 652 1732 108 124” 4306 4724 1499 3976 249
56” 1988 2134 676 1795 113 126” 4369 4801 1521 4041 254
58” 2057 2210 700 1861 116 128” 4439 4877 1545 4105 257
60” 2121 2286 724 1924 121 130” 4509 4953 1570 4169 262
62” 2191 2311 748 1988 125 132” 4572 5029 1594 4232 267
64” 2261 2438 773 2053 129 134” 4642 5105 1618 4296 270
66” 2330 2515 797 2116 133 136” 4712 5182 1641 4360 273
68” 2394 2591 821 2181 137 138” 4775 5258 1665 4425 278
70” 2464 2667 845 2245 141 140” 4845 5334 1689 4489 281
72” 2534 2743 868 2308 144
NOTES:

1. “C” AND “D” DIMENSIONS ARE APPROXIMATE. DO NOT USE FOR FABRICATION.
2. THESE MITER ELBOWS ARE TO BE USED ONLY WHEN AUTHORIZED BY THE PIPING SPEC’S FOR THE JOB.
3. USE “A” MINIMUM DIMENSION ONLY WHERE NECES- SARY TO MEET CLOSE CLEARANCE REQUIREMENTS.
4. USE BUTT-WELD “A” ONLY WHERE NECESSARY TO CONNECT TO FLANGE OR FITTING. USE MITER WELD FOR PIPE CONNECTION.
5. MATERIAL SHALL BE AS SPECIFIED IN THE JOB PIPING MATERIALS SPECIFICATION CLASS.
6. WELDING SHALL BE IN ACCORDANCE WITH JOB SPECIFICATIONS C-2 OR C-5.