Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 227 views

    2x10 Stereo Amp Circuit Diagram

    Uploaded by

    annel121409
    The kit 708 is a class AB stereo amplifier designed for quality hi-fi applications using a TDA2009A module. It requires an 8-24V DC power supply at 1-2A and can output over 10W per channel into 4 ohm speakers. Construction involves soldering surface mount components to the printed circuit board in the correct positions. It has a frequency response of 10Hz to 50kHz, gain of 36dB, and distortion of less than 1% for a 9W RMS output at 1kHz with a 24V supply.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    2x10 Stereo Amp Circuit Diagram

    Uploaded by

    annel121409
    227 views3 pages
    The kit 708 is a class AB stereo amplifier designed for quality hi-fi applications using a TDA2009A module. It requires an 8-24V DC power supply at 1-2A and can output over 10W per channel into 4 ohm speakers. Construction involves soldering surface mount components to the printed circuit board in the correct positions. It has a frequency response of 10Hz to 50kHz, gain of 36dB, and distortion of less than 1% for a 9W RMS output at 1kHz with a 24V supply.

    Original Description:

    amp circuit diagram

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The kit 708 is a class AB stereo amplifier designed for quality hi-fi applications using a TDA2009A module. It requires an 8-24V DC power supply at 1-2A and can output over 10W per channel into 4 ohm speakers. Construction involves soldering surface mount components to the printed circuit board in the correct positions. It has a frequency response of 10Hz to 50kHz, gain of 36dB, and distortion of less than 1% for a 9W RMS output at 1kHz with a 24V supply.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    227 views3 pages

    2x10 Stereo Amp Circuit Diagram

    Uploaded by

    annel121409
    The kit 708 is a class AB stereo amplifier designed for quality hi-fi applications using a TDA2009A module. It requires an 8-24V DC power supply at 1-2A and can output over 10W per channel into 4 ohm speakers. Construction involves soldering surface mount components to the printed circuit board in the correct positions. It has a frequency response of 10Hz to 50kHz, gain of 36dB, and distortion of less than 1% for a 9W RMS output at 1kHz with a 24V supply.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    CK708 - 10 + 10 Watt Stereo Amplifier

    K it 708 is a class AB stereo audio power


    amplifier designed for quality hi-fi
    applications using a TDA2009A module. It is
    The gain is equal to 1 +(R1/R2) = 68 or 37 dB.
    C8/R5 (and C9/R6) provide a high frequency
    load for stability where loudspeaker inductive
    easy to construct and has a minimum of reactance may become excessive. C4 and C5
    external components. The module has output provide power supply decoupling or filtering.
    current protection and thermal protection. This
    is the data book circuit which gives an The absolute maximum supply voltage for this
    excellent sound. The supply voltage required Kit is 28V. Check the power supply voltage
    for this kit is 8 - 24V DC at 1 to 2 Amps. and polarity before connecting to the board.
    Maximum output power will only be obtained We found no trouble in getting this kit to work.
    with a power supply of at least 20V and greater If yours does not work, first check all external
    than 1.5 A, and using 4 ohm speakers. wiring, make sure there are no shorts, then
    The power supply should be well filtered to check all the component positions and
    reduce mains hum, the on board capacitors orientation. Also check all solder joints and
    alone are not adequate for this purpose but are make sure there are no solder bridges.
    necessary to ensure stability. Extra filtering is
    unnecessary if operating from a battery.
    Specifications :

    Construction. D.C. Input : 8 – 24V at 1 – 2 A


    Follow the printed circuit overlay with Power output : > 10W RMS /channel, 4
    reference to the circuit diagram where ohm load, 24V DC supply.
    necessary. Add the lowest height components > 6W RMS /channel 8
    to the board first, starting with the resistors. Be ohm load 24V DC supply.
    careful to get the electrolytic capacitors in the > 4W RMS /channel, 4
    correct way around and all parts in their correct ohm load 12V DC supply.
    positions. Be careful when soldering the IC S/N ratio : > 75 dBA re. 10W output.
    not to use excessive heat. Use some heat sink Frequency response : ~ 10 Hz to 50 kHz –3 dB
    compound between the heat sink & the IC. Gain : ~ 36 dB
    Also note if you intend to drive it very hard, it Input level : ~ 100 mV for full output
    will require a bigger heatsink. Use shielded
    signal wire for the input connections, and at
    least 16/0.2 hook up wire for DC input and
    speaker outputs. Try to keep lead lengths as
    short as possible
    .

    Operation.
    The circuit is very straight forward. Most of the
    circuitry is contained within the amplifier
    module. C1 & C2 are input coupling capacitors
    and block DC, as do C10 & C11 which are the
    output coupling capacitors, and C6 & C7 which
    block DC from the feed back loop. R1/R2 (and
    R3/R4) set the level of feed back.

    Page 1 of 1
    Kit 708 - 10 x 10 Watt Stereo Amplifier

    Circuit Diagram

    +
    + Vin
    C4 C5 8 - 24V
    100 nF 100 uF 35V
    C1 9 Gnd
    3u3
    + 5 C10 2200 uF
    + 8 +
    Input 1 -
    C6 R1 +
    1k2 C8 35V
    4 + 100 nF
    R2 R5
    C2 TDA 2009 220 uF 18Ω 1Ω Speaker 1
    3u3
    + 1 C11 2200 uF
    + 10 +
    Input 2 - R3
    C7 1k2 C9 35V +
    2 + 100 nF
    3 6 220 uF R4 R6
    18Ω 1Ω Speaker 2

    C3
    22 uF

    Components

    Resistors : 1/2W, 5%.


    1K2 brown red red R1 R3 2
    1R brown black gold R5 R6 2
    18R brown grey black R2 R4 2

    Capacitors :
    3u3 50V mini C1 C2 2
    22uF 16V C3 1
    100uF 35V C5 1
    220uF 10V C6 C7 2
    2200uF 35V C10 C11 2
    100nF 104 mylar C4 C8 C9 3

    TDA2009A amp module 1


    Heat sink HS215 or HS110 1
    Nut & bolt set for HS 1
    2 pole terminal block 1
    3 pole terminal block 2
    K88 Printed Circuit Board 1

    Page 2 of 2
    Kit 708 - 10 + 10 Watt Stereo Amplifier

    Distortion @ 9W RMS Output


    1 kHz input and 24V DC
    supply:

    Page 3 of 3

    You might also like