Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 113 views

    Valve Characteristic Throttling Flange Type (As Per Ansi B 16.5)

    Uploaded by

    Pintu pajai
    The document provides specifications for two butterfly control valves with diameters of 450mm and 500mm. The valves will be used on the scrubbing system flue gas duct at a steel plant in Chandrapur, India. They will control flue gas flow and operate at temperatures up to 80 degrees Celsius. The valves will have A216 grade cast iron bodies with stainless steel discs and trim. Actuators will be pneumatic diaphragm types that fail closed on loss of air supply. Positioners will provide a 4-20 mA control signal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Valve Characteristic Throttling Flange Type (As Per Ansi B 16.5)

    Uploaded by

    Pintu pajai
    113 views6 pages
    The document provides specifications for two butterfly control valves with diameters of 450mm and 500mm. The valves will be used on the scrubbing system flue gas duct at a steel plant in Chandrapur, India. They will control flue gas flow and operate at temperatures up to 80 degrees Celsius. The valves will have A216 grade cast iron bodies with stainless steel discs and trim. Actuators will be pneumatic diaphragm types that fail closed on loss of air supply. Positioners will provide a 4-20 mA control signal.

    Original Title

    Dembla valves

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for two butterfly control valves with diameters of 450mm and 500mm. The valves will be used on the scrubbing system flue gas duct at a steel plant in Chandrapur, India. They will control flue gas flow and operate at temperatures up to 80 degrees Celsius. The valves will have A216 grade cast iron bodies with stainless steel discs and trim. Actuators will be pneumatic diaphragm types that fail closed on loss of air supply. Positioners will provide a 4-20 mA control signal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    113 views6 pages

    Valve Characteristic Throttling Flange Type (As Per Ansi B 16.5)

    Uploaded by

    Pintu pajai
    The document provides specifications for two butterfly control valves with diameters of 450mm and 500mm. The valves will be used on the scrubbing system flue gas duct at a steel plant in Chandrapur, India. They will control flue gas flow and operate at temperatures up to 80 degrees Celsius. The valves will have A216 grade cast iron bodies with stainless steel discs and trim. Actuators will be pneumatic diaphragm types that fail closed on loss of air supply. Positioners will provide a 4-20 mA control signal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    BUTTER FLY CONTROL VALVE

    DIA450 DATA SHEET

    CUSTOMER STEEL AUTORITY OF INDIA ISSUED FOR


    CONSULTANT CENTRE FOR ENGINEERING & TECHNOLOGY, RACHI.
    LOCATION CHANDRAPUR APPROVAL
    PLANT SCRUBBING SYSTEM
    TAG & LOCATION
    TAG NO 11-BFV-02,12-BFV-02
    LOCATION ON SHUNT LINE DUCT
    GENERAL
    SERVICE FLUE GASES
    OPER/MAX TEMPERATURE 60DEG / 80DEG
    BODY & TRIM
    BODY FORM BUTTERFLY OFFSET
    SIZE BODY / SIZE TRIM 450 MM/ 450 MM
    END CONNECTION/ SIZE TRIM FLANGE TYPE (AS PER ANSI B 16.5)
    VALVE CHARACTERISTIC THROTTLING
    BODY MATERIAL A 216 GR.WCB, PTFE MOLDED
    DISC MATERIAL SS 316
    TRIM MATERIAL AISI 316 SS
    TRIM FORM DOUBLE OFFSET DISC 150-90 °
    DEMBLA SERIES AS PER VENDOR
    TRIM MATERIAL
    PLUG / DISC / BALL / FACING AISI 316SS
    SEAT RING/ FACING PTFE
    FLOW DIRECTION UNIDIRECTION
    SEAT LEAKAGE CLASS IV
    BONNET TYPE STANDARD
    GLAND PACKING PTFE-V RINGS
    ACTUATOR
    ACTUATOR TYPE / ACTION DIAPHRAGM / DIRECT ACTING
    VALVE ACTION AIR TO POWER TO OPEN
    FAIL SAFE CONDITION FAIL TO CLOSE
    SPRING RANGE 1.0- 2.6 kg/cm2
    SUPPLY 3.0 kg/cm2
    ACTUATOR MODEL LDP-4-98-90°
    VALVE TRAVEL 0- 90 °
    SIZE ( INCH) / SUPPLY CONNECTION 140 / 3/8 "
    HAND WHEEL SIDE MOUNTED HAND WHEEL WITH GEAR OPERATION
    POSITIONER
    POSITIONER TYPE ELECTRO-PNEUMATIC , POSITION FEEDBACK TRANSMITTER
    ACTION SINGLE ACTING
    NO.OF GAUGE 1 NO
    INPUT SIGNAL 4 - 20 mA (INTRINSICALLY SAFE)
    SUPPLY PRESSURE 3 kg/cm2
    PNEUMATIC CONNECTION 1/4" NPT
    CABLE ENTRY 1/2" NPT
    ENCLOSURE EX-PROOF (IIA-IIB)
    MODEL V18345.10.2.1.4.2.1.0.0.1
    MAKE ABB INST.
    AIR SET
    PNEUMATIC CONNECTION 3/8" NPT
    AIR FILTER 5 MICRON
    TUBING SS / COPPER
    GAUGES 2 " DIAL- 2NOS
    BODY DISC ALUMINUM
    MAKE SHAVO
    MODEL S-20
    MAKE DEMBLA
    MODEL DEMBLE0 7400 SERIES
    VALVE QTY 2 NOS
    POSITIONER MAKE ABB INST. / YIL / EMERSON.
    ACTUATOR QTY 2 NOS
    NOTE:-
    1. INSPECTION WILL BE DONE AS PER INSPECTION TEST PLAN
    2. VENDOR HAS TO SUBMIT ALL THE QAP,TEST CERTIFICATES, O&M MANUAL, MOUNTING DETAILS FOR APPROVAL,ETC IN 2 SETS.
    KSPL DOC NO. : KSPL/1902/SS/RA/1 REV - 1 PS SMK DATE
    SAIL DOC NO. :
    SHEET 2 OF 16 PREPARED BY CHECKED BY APPROVED BY 16.01.13
    CFP/SAF-3/GSPL/DE/A/TK-1/038/004

    page 76
    page 77
    page 78
    BUTTER FLY CONTROL VALVE
    DIA500 DATA SHEET

    CUSTOMER STEEL AUTORITY OF INDIA ISSUED FOR


    CONSULTANT CENTRE FOR ENGINEERING & TECHNOLOGY, RACHI.
    LOCATION CHANDRAPUR APPROVAL
    PLANT SCRUBBING SYSTEM
    TAG & LOCATION
    TAG NO 11-BFV-04,12-BFV-04
    LOCATION DUCT
    GENERAL
    SERVICE FLUE GASES
    OPER/MAX TEMPERATURE 60DEG / 80DEG
    FLOW CHARACTERISITC THROTTLING / ON-OFF TYPE
    BODY & TRIM
    BODY FORM BUTTERFLY OFFSET
    SIZE BODY / SIZE TRIM 500 MM/ 500 MM
    END CONNECTION/ SIZE TRIM FLANGE TYPE (ANSI B 16.5 )
    VALVE CHERECTERISTIC THOTALLING
    BODY MATERIAL A 216 GR.WCB, PTFE MOLDED
    DISC SS 316
    TRIM MATERIAL AISI 316 SS
    TRIM FORM DOUBLE OFFSET DISC 150-90 °
    DEMBLA SERIES AS PER VENDOR
    TRIM MATERIAL
    PLUG / DISC / BALL / FACING AISI 316 SS
    SEAT RING/ FACING PTFE
    FLOW DIRECTION UNIDIRECTION
    SEAT LEAKAGE CLASS IV
    BONNET TYPE STANDARD
    GLAND PACKING PTFE-V RINGS
    ACTUATOR
    ACTUATOR TYPE / ACTION DIAPHRAGM / DIRECT ACTING
    VALVE ACTION AIR TO POWER TO OPEN
    FAIL SAFE CONDITION FAIL TO CLOSE
    SPRING RANGE 1.0- 2.6 kg/cm2
    SUPPLY 3.0 kg/cm2
    ACTUATOR MODEL LDP-4-98-90°
    VALVE TRAVEL 0- 90 °
    SIZE ( INCH) / SUPPLY CONNECTION 250 / 3/8 "
    HAND WHEEL SIDE MOUNTED HAND WHEEL WITH GEAR OPERATION
    POSITIONER
    POSITIONER TYPE ELECTRO-PNEUMATIC , POSITION FEEDBACK TRANSMITTER
    ACTION SINGLE ACTING
    NO.OF GAUGE 1 NO
    INPUT SIGNAL 4 - 20 mA (INTRINSICALLY SAFE)
    SUPPLY PRESSURE 3 kg/cm2
    PNEUMATIC CONNECTION 1/4" NPT
    CABLE ENTRY 1/2" NPT
    ENCLOSURE EX-PROOF (IIA-IIB)
    MODEL V18345.10.2.1.4.2.1.0.0.1
    MAKE ABB INST.
    AIR SET
    PNEUMATIC CONNECTION 3/8" NPT
    AIR FILTER & REGULATOR 5 MICRON
    TUBING SS /COPPER
    GAUGES 2 " DIAL- 2NOS
    BODY DISC ALUMINUM
    MAKE SHAVO
    MODEL S-20
    MAKE DEMBLA
    MODEL DEMBLA 7400 SERIES
    VALVE QTY 2 NOS
    POSITIONER MAKE ABB INST.
    ACTUATOR QTY 2 NOS
    NOTE:-
    1. INSPECTION WILL BE DONE AS PER INSPECTION TEST PLAN
    2. VENDOR HAS TO SUBMIT ALL THE QAP,TEST CERTIFICATES, O&M MANUAL, MOUNTING DETAILS FOR APPROVAL,ETC IN 2 SETS.
    KSPL DOC NO. : KSPL/1902/SS/RA/1 REV - 1 PS SMK DATE
    SAIL DOC NO. :
    SHEET 3 OF 16 PREPARED BY CHECKED BY APPROVED BY 16.01.13
    CFP/SAF-3/GSPL/DE/A/TK-1/038/004

    page 79
    page 80
    page 81

    You might also like