IGT-1205AT

Industrial 10/100/1000T to 2-port 100/1000X

SFP Media Converter

Physical Port
• 1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X
function
• 2-port SFP slot interface, SFP supports 1000Base-X and
100Base-FX transceiver via DIP switch configured

Fiber Port Redundancy

• Link status auto-detect and redundant on dual ports with
the same connector type
Flexible, Reliable and Industrial-grade Network Distance Extension Solution • Only Primary-Port is active at a time, the Backup-Port is
PLANET IGT-1205AT is an Industrial Gigabit Media Converter providing non-blocking blocked
wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh • When Primary-Port link failure occurs, the traffic will swap
industrial environment. It is equipped with one 10/100/1000Base-T RJ-45 copper and to Backup-Port automatically.
two 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case
• Once the Primary-Port status is back to link-up, the traffic
with redundant power system. The IGT-1205AT is well suited for applications in deploying
will swap from Backup-Port to Primary-Port
surveillance system, and securing control and wireless service in climatically demanding
environments with wide temperature range from – 40 to 75 degrees C.
Layer 2 Features
• Supports auto negotiation and 10/100Mbps half / full
Fiber-Optic Link Capability Enables Extension of Network Deployment
duplex and 1000Mbps full duplex mode
The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM
• High performance Store and Forward architecture, runt/
through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optic
CRC filtering eliminates erroneous packets to optimize the
uplink capability guarantees the throughput to all nodes hooked into the network and
network bandwidth
the Gigabit Ethernet distance can be extended from 550 meters (Multi-mode fiber cable)
• Prevents packet loss with back pressure (half-duplex) and
up to 10/20/30/40/50/70/120 kilometers (Single-mode fiber cable), and also the Fast
IEEE 802.3x pause frame flow control (full-duplex)
Ethernet distance can be extended from 2km (Multi-mode fiber cable) up to 20/40/60
kilometers (Single-mode fiber cable). They are well suited for applications within the • 9K Jumbo Frame Size support

factory data centers and distributions. • Integrated address look-up engine, support 1K absolute
MAC addresses

Extending Ethernet Distance • Automatic address learning and address aging

Outdoor Outdoor
Industrial Case / Installation
IP Camera IP Camera
• Slim IP30 metal case protection
• DIN rail and wall mount design
Ethernet up to Ethernet up to
100 meters 100 meters • Redundant Power Design
–– 12 to 48V DC, redundant power with polarity reverse
Network Video
Recorder
protect function
–– AC 24V power adapter acceptable
Gigabit Fiber Switch
• Supports EFT protection 6000 VDC for power line
IGT-1205AT IGT-1205AT
• Supports 6000 VDC Ethernet ESD protection
Fiber Optic Cable Fiber Optic Cable
up to 120km up to 120km • -40 to 75 degrees C operating temperature

Data Sheet 240km

1 1
 IGT-1205AT

Adjustable 3-Port Switch Mode or 2 Fiber Redundant Mode

Via the built-in DIP switch, the two SFP fiber interfaces of the IGT-1205AT can be configured as Ethernet switch mode or Fiber Redundant mode. With the
Ethernet switch mode, it can operate in Store-and-Forward mechanism with high performance; with the 2-port Fiber redundant mode, it provides rapid fiber
redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recovering function. If the destination port of a packet is link-
down, it will forward the packet to the other port of the backup pair.

Site to Site Fiber Link Redundancy — ISP, Bank and Enterprise

Primary Link
1000Base-X Fiber
IGT-1205AT (Forwarding) IGT-1205AT
Redundant Industrial 1000
Redundant Industrial
Converter 20Km Converter

Redundant Link
1000Base-X Fiber
(Disabled)
10/100/1000Base-T UTP
10/100/1000Base-T UTP Gigabit
Gigabit
Ethernet Switch
Ethernet Switch

Location A Location B

1000Base-T UTP
1000 1000Base-SX/LX Fiber-optic

Environmentally Hardened Design

The IGT-1205AT is equipped with the slim-type IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case
protection, the IGT-1205AT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on
plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGT-1205AT can be
placed in almost any difficult environment. The IGT-1205AT also allows either DIN rail or wall mounting for efficient use of cabinet space.

Convenient and Reliable Power System

To enhance the operation reliability and flexibility, the IGT-1205AT is equipped with two DC power input connectors for redundant power supply installation. It
also possesses an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring
dual or backup power inputs.

Applications
Hardened Environment Application
PLANET IGT-1205AT Industrial Gigabit Media Converter offers full port Gigabit speed. It provides very high reliability and security features to make sure the
continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures
can be experienced. Moreover, the IGT-1205AT is also compatible with 100Mbps and 1000Mbps SFP transceivers to provide a strong, stable and long-
distance connection and flexible industrial networking deployment.

Fiber Switch

Serial over
IGT-1205AT Ethernet Device
100

20km

1000
50km
IGT-1205AT

I/O

Control Center
1000
120km PLC

I/O

Outdoor
IP Camera IGT-1205AT I/O
Robot ROBOT ROBOT
Robot

Subway 2 Maintenance Shop

Outdoor
IP Camera

100BASE-TX UTP
100 100BASE-FX Fiber-optic
1000 1000BASE-SX/LX Fiber-optic
Subway 1 I/O DI/DO

2
 IGT-1205AT

Redundancy Application
The IGT-1205AT industrial Gigabit Media Converter provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode
supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.

Link Path Redundant to Critical Network Service

1000
Server
(ATM/
Primary Link IGT-1205AT IP Camera/
1000Base-X Fiber Redundant Industrial Security Machine)
Gigabit (Forwarding) Converter
Ethernet Switch

Data Server
Redundant Link
Gigabit 1000Base-X Fiber
(Disabled)
Ethernet Switch

1000Base-T UTP
1000 1000Base-SX/LX Fiber-optic

Product Specifications
Model IGT-1205AT
Hardware Specifications
1 x 10/100/1000Base-T RJ-45 TP
Copper Ports
Auto-MDI/MDI-X, Auto-Negotiation
2 1000Base-SX/LX/BX SFP interfaces (Port-1 and Port-2)
SFP / mini-GBIC Slots
Compatible with 100Base-FX SFP
ƒƒ DIP-1: SFP Port 1 1000Base-X (default) / 100Base-FX
DIP Switch ƒƒ DIP-2: SFP Port 2 1000Base-X (default)/ 100Base-FX
ƒƒ DIP-3: Switch mode / Fiber Redundant mode
Removable 6-pin terminal block
Connector
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Provides one relay output for power failure
Alarm
Alarm Relay current carry ability: 1A @ DC 24V
3 x LED for System and Power:
ƒƒ Green: DC Power 1
ƒƒ Green: DC Power 2
ƒƒ Green: Power Fault
LED 2 x LED for Per Copper Port:
ƒƒ Green:1000 LNK/ACT
ƒƒ Orange:100 LNK/ACT
1 x LED for Per mini-GBIC interface (Port-1 and Port-2)
ƒƒ Green: LNK/ACT
ESD Protection 6KV DC
EFT Protection 6KV DC
Enclosure IP30 type metal case
Installation DIN rail kit and wall mount ear
Dimensions (W x D x H) 135 x 87 x 32mm
Weight 505g
DC 12~48V or AC 24V
Power Requirements
Redundant power with polarity reverses protection function
Power Consumption / Dissipation 4.8 watts/16BTU

3
 IGT-1205AT

Twisted-Pair
10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters
100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters
1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters
Fiber-Optic Cable
1000Base-SX:
Cable
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m
1000Base-LX:
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (vary on SFP module)
100Base-FX:
ƒƒ 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2 kilometers
ƒƒ 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (vary on SFP module)
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 1K entries
Back pressure for half duplex
Flow Control
IEEE 802.3x pause frame for full duplex
Switch fabric 6Gbps
Throughput (packet per second) 4.46Mpps@64bytes
Maximum Transmit Unit 9216 bytes
SX/LX: 2000Mbps (full-duplex)
Speed FX: 200Mbps (full-duplex)
TP: 10/20Mbps, 100/200Mbps, 2000Mbps
Switch Specifications
IEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
Standards Compliance IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX
IEEE 802.3x Full-Duplex Flow Control
Regulation Compliance FCC Part 15 Class A, CE
IEC60068-2-32(Free fall)
Stability Testing IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)
Environment
Operating: -40~75 degrees C
Temperature
Storage: -40~75 degrees C
Operating: 5~95% (non-condensing)
Humidity
Storage: 5~95% (non-condensing)

Ordering Information
IGT-1205AT Industrial 10/100/1000T to 2-port 100/1000X SFP Media Converter

Related Products
MFB-Series Transceiver 100Base-FX SFP Transceiver
MGB-Series Transceiver 1000Base-SX/LX SFP Transceiver

PLANET Technology Corporation

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGT-1205AT
231, Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2014 PLANET Technology Corp. All rights reserved.
Email: sales@planet.com.tw www.planet.com.tw
4