Din en 857 2 SC: Compact Hydraulic Hose Construction Acc. To EN 857 2 SC
Din en 857 2 SC: Compact Hydraulic Hose Construction Acc. To EN 857 2 SC
HOSE :
Synthetic rubber, resistant against hydraulic fluids (HL, HLP, HLPD, HVLP,
Tube
HFA, HFAS, HFB, HFC)
Test Burst
Nominal Inside Braid Outside Working pressure Bend radius Weight
pressure pressure
Ø Ø Ø Ø
Please note: Before using our products with new or untested media, or for applications that are not clearly indicated in the product information, written advice must be obtained from a specialist dealer
or a Semperit application engineer. For safety reasons, all products must be inspected regularly for operational safety and r eplaced in the event of any damage (especially of the cover) or unusual
signs of wear and tear. All products must be stored, handled and maintained in accordance with all our respective instructions and DIN 7716:1982. The information in our catalogue as well as each
individual datasheet is subject to change at any time without notice since we are constantly developing and improving our products and due to constant technical developments after the latest release
date of the catalogue and/or individual datasheets. In order to always have the latest product and safety information make sure you visit our website (www.semperflex.com) regularly or contact one of
our specialist dealers or a Semperit application engineer. All contracts with Semperflex are exclusively subject to our general terms and conditions (available at www.semperitgroup.com).
Important notice: Our catalogue and any individual datasheet have been prepared with great care in order to provide you with all the
information you need. The information contained therein is based on the latest state-of-the-art industrial technology and many years of
experience and testing; whenever indicated for a certain product, we also confirm conformity with the resistance requirements of the media
indicated in the product catalogue. However, the individual conditions of storage, maintenance and use decisively affect the safe and
durable use of each product. The quality and safety of our products as indicated in the catalogue or individual datasheets are therefore
strictly subject to the continuous observance of all specifications and restrictions in our written product information, appl icable laws and
standards. We reject any liability for safety issues or other consequences due to improper product choice, maintenance or handling (e.g.
squashing, rupturing, stretching or filling with non-approved media). Our products must not be used in airplanes or other aerial vehicles
under any circumstance. Unless specified otherwise, all hoses are manufactured according to EN853, 856, 857 and SAE J 517.