Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Hoballoy 8018B2: AWS E8018-B2 H4R Elding Ositions

    Uploaded by

    Juan
    This document provides information on Hoballoy 8018B2 welding wire. It lists the wire's features such as low spatter and slag removal. It recommends using the wire for direct current electrode positive welding and provides application details like welding positions and techniques. Finally, it includes mechanical properties and chemical composition for the wire's weld metal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hoballoy 8018B2: AWS E8018-B2 H4R Elding Ositions

    Uploaded by

    Juan
    28 views2 pages
    This document provides information on Hoballoy 8018B2 welding wire. It lists the wire's features such as low spatter and slag removal. It recommends using the wire for direct current electrode positive welding and provides application details like welding positions and techniques. Finally, it includes mechanical properties and chemical composition for the wire's weld metal.

    Original Description:

    Manual Hobart

    Original Title

    Hoballoy8018B2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on Hoballoy 8018B2 welding wire. It lists the wire's features such as low spatter and slag removal. It recommends using the wire for direct current electrode positive welding and provides application details like welding positions and techniques. Finally, it includes mechanical properties and chemical composition for the wire's weld metal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views2 pages

    Hoballoy 8018B2: AWS E8018-B2 H4R Elding Ositions

    Uploaded by

    Juan
    This document provides information on Hoballoy 8018B2 welding wire. It lists the wire's features such as low spatter and slag removal. It recommends using the wire for direct current electrode positive welding and provides application details like welding positions and techniques. Finally, it includes mechanical properties and chemical composition for the wire's weld metal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    HOBALLOY8018B2

    AWS E8018-B2 H4R WELDING POSITIONS:

    FEATURES: BENEFITS:
    • Good arc characteristics • Stable, easy to control arc
    • Low spatter level • Improves weld bead appearance, higher deposition
    • Quick and easy slag removal • Reduces clean-up time
    • Low moisture reabsorption • Prevents starting porosity
    • Low smoke level • Welder safety and comfort
    • Low hydrogen less than 4 ml/100 g • Resistant to hydrogen-induced cracking
    APPLICATIONS:
    • Boiler fabrication and maintenance
    TYPE OF CURRENT: Direct Current Electrode Positive (DCEP) or AC
    RECOMMENDED WELDING TECHNIQUES:
    GENERAL: Electrode positive, work negative (DCEP) or AC
    ARC LENGTH: Very short arc
    FLAT: Angle electrode 10°-15° from 90°
    VERTICAL-UP: Use weaving techniques
    VERTICAL-DOWN: Not recommended
    OVERHEAD: Use slight weaving motion within the puddle
    STORAGE: After opening, store in holding oven (220°F to 350°F) until used.
    RECONDITIONING If exposed to atmosphere for extended periods, reconditioned for one (1) hour at 600°F.
    TYPICAL WELD METAL PROPERTIES* (Chem Pad):

    Weld Metal Analysis (%) AWS Spec


    Carbon (C) 0.08 0.12 max
    Manganese (Mn) 0.69 0.90 max
    Sulphur (S) 0.02 0.03 max
    Phosphorus (P) 0.01 0.03 max
    Silicon (Si) 0.66 0.80 max
    Chromium (Cr) 1.34 1.00 - 1.50
    Molybdenum (Mo) 0.51 0.40 - 0.65
    TYPICAL MECHANICAL PROPERTIES* (SR):

    Stress relieved 1 hour at 1275°F AWS Spec (minimum)


    Tensile Strength 105,000 psi (723 MPa) 80,000 psi (550 MPa)
    Yield Strength 92,000 psi (634 MPa) 67,000 psi (460 MPa)
    Elongation % in 2” 21% 19%
    TYPICAL CHARPY V-NOTCH IMPACT VALUES*:
    Not required
    TYPICAL DIFFUSIBLE HYDROGEN:

    Hydrogen Equipment AWS Spec


    (GAS CHROMATOGRAPHY) 2.9 ml/100 g —

    *The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Hobart Brothers Company
    expressly disclaims any liability incurred from any reliance thereon. Typical data are those obtained when welded and tested in accordance with the AWS
    A5.5 specification. Other tests and procedures may produce different results. No data is to be construed as a recommendation for any welding condition
    or technique not controlled by Hobart Brothers Company.

    Hobart Brothers Company  101 Trade Square East  Troy, OH 45373


    PH: (800) 424-1543  FX: 800-541-6607  www.hobartbrothers.com
    HOBALLOY8018B2
    Diameter Minimum Optimum* Maximum
    Inches mm Type of Power Amps Amps Amps

    3/32 2.4 DCEP or AC 70 100 110


    1/8 3.2 DCEP or AC 90 135 160
    5/32 4.0 DCEP or AC 130 170 220
    3/16 4.8 DCEP or AC 200 250 300
    *For out of position welding, reduce amperages shown by 15%.

    TYPICAL DEPOSITION DATA (at optimum):

    Diameter Deposition Rate


    Inches mm Type of Power Amps lbs/hr

    3/32 2.4 DCEP 100 2.47


    1/8 3.2 DCEP 135 2.87
    5/32 4.0 DCEP 170 3.84
    3/16 4.8 DCEP 250 5.86
    *Allowance made for 2” stub loss included.

    • Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical
    depending on the type and thickness of steel being welded.
    STANDARD DIAMETERS AND PACKAGES: For a complete list of diameters and packaging, please contact Hobart
    Brothers at (800) 424-1543 or (937) 332-5188 for International Customer Service.

    Diameter Length 10-lb 50-lb


    Inches mm Inches mm Can Can

    3/32 2.4 14 355 S125432-033 S125432-035


    1/8 3.2 14 355 S125444-033 S125444-035
    5/32 4.0 14 355 — S125451-035
    3/16 4.8 14 355 — S125458-035

    CONFORMANCES AND APPROVALS:


    • AWS A5.5, E8018-B2 H4R
    • ASME SFA 5.5, F-4, A-3, E8018-B2
    • ABS E8018-B2

    TECHNICAL QUESTIONS? For technical support of Hobart Filler Metals products, contact the Applications Engineering department by phone toll-free at
    1-800-532-2618 or by e-mail at Applications.Engineering@hobartbrothers.com
    CAUTION:
    Consumers should be thoroughly familiar with the safety precautions on the warning label posted in each shipment and in the American National Standard
    Z49.1, “Safety in Welding and Cutting,” published by the American Welding Society, 8669 NW 36th St., Miami, FL 33166 (can also be downloaded online at
    www.aws.org); OSHA Safety and Health Standards 29 CFR 1910 is available from the U.S. Department of Labor, Washington, D.C. 20210
    Material Safety Data Sheets on any Hobart Brothers Company product may be obtained from Hobart Customer Service or at www.hobartbrothers.com.
    Because Hobart Brothers Company is constantly improving products, Hobart reserves the right to change
    design and/or specifications without notice.
    Hobart and Hoballoy are registered trademarks of Hobart Brothers Company, Troy, Ohio.
    Revision Date: 160418 (Replaces 131001)
    613-B, INDEX

    You might also like