System 7550™

Electrosurgical Generator
with Argon Beam Coagulation
System 7550™ Electrosurgical Generator with Argon Beam Coagulation (ABC®) Technology
The ConMed® System 7550™ with ABC® Technology offers an exceptional level of rapid hemostasis. Argon Beam Coagulation
allows the surgeon to achieve reduction in blood loss, surgical time and surgical plume. Surgeons use this electrosurgical generator
in a number of surgical procedures, including open, laparoscopy, and gastroenterology.

Advanced Argon Beam Coagulation

• Unmatched hemostasis performance of the System 7550™ with ABC® Technology creates important clinical benefits for
the patient, hospital and physician
• Proven reductions in blood loss
• Significant reductions in surgical time
• Visible reduction of electrosurgical plume
• Immediate reduction of tissue carbonization and thermal penetration

Specialty Modes Eliminate the Guess Work

• AUTO Mode uses onboard programming to optimize Power/Gas integration for all open procedures
• ENDO Mode for use in laparoscopic and G.I. procedures
• MANUAL Mode allows the surgeon to fine-tune power and flow rates to achieve unique levels of performance and hemostasis

Ease of Use
• Intuitive control panel
• Large, easy-to-read LED displays
• 9 programmable memory settings
reduce set-up time
• Dual hand control receptacles for
simultaneous use

State-of-the-Art Electrosurgery
• Full feature ESU
• Monopolar CUT with nine levels
of increasing hemostasis provides
unmatched dissection performance
• Pulsed CUT provides slow interval
coagulation to control difficult bleeding
• Spray COAG for a wider coagulation
pattern with limited thermal penetration
• Bipolar COAG for a wide range of
applications

Remote Power Control

Surgeons can modify the electrosurgical
effect from within the sterile field by
adjusting power levels with a standard
electrosurgical pencil. It is as simple as
a double-click

Patient Safety
• ARM (Automatic Return Monitoring)
monitors the patient/pad interface and
will instantly interupt power delivery and
gas flow if a pad fault condition occurs
• Isolated technology helps reduce the
potential for alternate site burns
 CUT:
Pure
Blend

Blend Control COAG:

Spray
ABC: Pin Point
Auto
Endo
Gas Flow
Control

Automatic
Return Monitor
Program (ARM)

Argon Tank
Remote Indicator Assist
Bipolar
Power Control Resistance
Bargraph

Purge
 System 7550™ Electrosurgical Generator with Argon Beam Coagulation®

Product Specifications
Maximum Typical Open Circuit
Mode Load (Ohms)
Power (Watts) Vol. (PP V)
Pure CUT 300 1,700 500
Blend 3 200 2,000 500
Blend 6 200 2,600 500
Blend 9 200 3,400 500
Spray COAG 80 9,200 500
Pin Point COAG 120 4,800 500
ABC ®
150 12,000 500
Bipolar COAG 70 300 100

Configuration: Solid State, Isolated Output

Frequency: 461 kHz (Cut, Blend, Pin Point Coag and Bipolar),
420 kHz (Spray Coag), 570 kHz (ABC® Technology)
RF Isolation: <150mA per IEC 60601-2-2
Input: 115V (± 10% at 60Hz 12.5A), 230V (± 10% at 50Hz 6.25A),
100V (± 10% at 50/60Hz 15A)
Cooling: Convection (No fan)
Dimensions: 24”Wx25”Dx41”H, 110 lbs (60.1cmWx63.5cmDx104.1cmH,
49.9kg), without cylinders
Argon Gas Recommendations: 99.9985% purity
Gas Flow: 0.1 SLPM - 10.0 SLPM

Ordering Information
Catalog Number Product Description
60-7550-120 System 7550™ ESU and base (110V, 60Hz)

60-7550-230 System 7550™ ESU and base (230V, 50Hz/60Hz)

130146 Footswitch, Single-pedal ABC®

60-5104-001 Monopolar Footswitch (full size) for use with ABC®, 10’ cable
60-5104-003 Monopolar Footswitch (full size) for use with ABC®, 15’ cable

60-5103-001 Bipolar Footswitch, Omni-directional, 10’ cable

60-5103-002 Bipolar Footswitch, Omni-directional, 15’ cable

136050 System 7550™ ABC® Argon Gas Cylinder. Gas included

136051 System 7550™ ABC® Argon Gas Cylinder. Empty

®
Please contact your local ConMed Territory Manager for information on
our full line of Argon Beam Coagulation devices and accredited ABC®
Technology Continuing Education Programs.

© 2011, ConMed Corporation, 1/2011, printed in U.S.A., Control #9212 Rev. G MBR 9081 Rev. 2