Keystone EPI-2 electric actuators

The EPI-2 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves
with torques from 35 to 2000 Nm / 308 to 17,700 lb.in.

Features

• Low or high voltage single phase DC or AC

power supply with 3-phase option
• Multiple adjustable stroking times to suit
specific applications
• Interchangeable base plate and range of
shaft inserts enable simple connection to any
valve type
• Intelligent control unit prevents overheating
• Epicyclical gearing ensures reliable and
smooth operation
• Top-mounted position indicator
• Constantly-engaged, hand wheel-operated
manual override in case of power failure
• Bluetooth™ wireless connectivity for
non-intrusive configuration, operation and
diagnostics
• Optional local control panel for manual valve
operation with additional open/close indicator
• Simple upgrade options for modulating
control and network communication via
DeviceNet or Profibus DP protocols
• Latched-type output contacts for fully open/
fully close remote indication. Output contacts
for monitor and blinker/local selector
General application Technical data indication are also available

Power supply: Single phase from 24 to

The EPI-2 is available in six sizes and is Bluetooth™ is a trademark of Bluetooth SIG. Inc, USA
48 V DC or AC at 50/60 Hz
designed for on/off or modulating control of
Single phase from 100
butterfly, ball, rotary plug valves or dampers in
to 240 V DC or AC at
a wide range of heavy industrial, chemical and
50/60 Hz
petrochemical plants on and offshore.
3-phase from 208‑240
V AC, 380-480 V AC and
500‑575 V AC
Approvals
Voltage fluctuations: +/-10%
Waterproof: IP66/68 or NEMA 4/4X/6 Frequency: +/- 5%
(NEMA ICS6/NEMA 250) Torque output: From 35 to 2000 Nm /
CAN/CSA C22.2 No 139-10 308 to 17,700 lb.in.
UL 429-2009 Ambient temperature
Standard range: -25°C to +70°C /
Explosionproof: Ex d e IIB T5 Gb (gas) -13°F to 158°F
Ex tb IIIC T100°C Db (dust) Low temp range: -40°C to +70°C /
(prefix c for model 2000) -40°F to 158°F
NEC 500 (FM approval) Conduit entry: M25/1” NPT
Class I, Zone 1 Group IIB
Class II, III, Division 1,
Groups E, F,G

www.valves.emerson.com © 2017 Emerson. All rights reserved. VCTDS-02865-EN 16/01

Keystone EPI-2 electric actuators
Component parts - Models 063/E006-125/E013-250/E025-500/E051-1000/E091

Part Description Quantity

1 Nut UNI5588 M6 2 40
2 Nut UNI5588 M8 2
3 Eccentric 1 16
4 Planocentric gear 2
5 Spacer 1 13
6 Ball bearing type 16002 1
7 Ball bearing type 16004 2 31
8 Ball bearing type 6001 1
9 ESH screw UNI5931- M6x8 1 17

10 HSHC screw UNI5931- M6x16 4

11 HSHC screw UNI5931- M4x14 7 38
12 HSHC screw UNI5931- M6x18 2
13 HSHC screw UNI5931- M6x25 4 34

14 HSHC screw UNI5931- M8x20 4 32

15 HSSC screw UNI5933- M4x10 1
16 Cover assembly 1 47

17 Drive and control unit 1

50
18 Handwheel 1 7
19 Output drive assembly 1 8
42
20 Standard housing 1
3
21 Stopper 2
6
22 Terminal block 1 43
23 Worm shaft flange 1 19
24 Anti-loosening washer UNI 8842-J6 1 29
26
25 Base plate ISO 5211 / F05-F07 1
5
26 Cover gasket 1* 46 48 10
27 Dowel pin UNI EN 22338 1 4
27
28 Earth stud 1 21
29 Fixed anulus 1
2
30 Gasket 1*
31 Indicator 1 45
20
32 Indicator shaft 1
44 30
33 Manual worm shaft 1
34 Motor pinion 1 22
35 O-ring Di=10.77/W=2.62 1* 41 11
36 O-ring Di=18.77/W=1.78 1* 28

37 O-ring Di=52.07/W=2.62 1*
9 49
38 O-ring Di=6.07/W=1.78 1*
14 25 37
39 Plug 1
40 Position label 1
41 Power clamps protection 1 1 24
39 15 18 35 12 23 36 33
42 Ring 2
43 Ring for pins alignement 1
44 Ring RW 7 UNI7433 2
45 Seal washer 8.3 2
46 Sliding ring 1
47 Snap ring for shaft D.6 1
48 Terminal block cover 1
49 Terminal board gasket 1*
50 Wheel 1

* Indicates recommended spare parts

2
Keystone EPI-2 electric actuators
Component parts - Model 2000/E171

Part Description Quantity

1 Nut M20 ISO 4032 EN 24032 2
2 Ball bearing type 6006 1
3 Ball bearing type 16004 1
4 Ball bearing type 61908 1
5 HSHC screw UNI5931- M6x16 3
6 HSHC screw UNI5931- M12x30 4
7 HSHC screw UNI5931- M12x65 4
8 HSHC screw UNI5931- M8x25 A4-70 6
9 EPI-2 actuator 1
10 Base housing 1
11 Base plate ISO 5211 / F12-F16 1
12 Bearing support 1
13 Bushing 2
14 Bushing 1
15 Bushing 1
16 Bushing 1
17 Dowel pin UNI EN 22338 D 8x20 type B 4
18 Gasket 1*
19 Hex head screw M20x80 UNI EN 24017 2
20 Idle wheel shaft 1
21 Needle bearing type NKI 22/16 2
22 O-ring Di=82.22/W=2.62 1*
23 Position wheel 1
24 Seal washer 20.3 2
25 Selector gear 1
26 Sliding ring 1
27 Upper vover 1
28 Wheel 2

* Indicates recommended spare parts

3
Keystone EPI-2 electric actuators
Design features

Mechanical connection to the valve Local manual override

EPI-2 actuators feature a multi drilled base A constantly engaged manual override (not
plate and a range of drive inserts to allow direct rotating during motor operation) is fitted to all
mounting to almost all valve types according EPI-2 actuators.
the EN ISO 5211 and other manufacturers’
standards. Torque and sizing
The EPI-2 range comprises of six models,
Power supply for operating torques of up to 2000 Nm /
EPI-2 can simply be connected to the local 17,700 lb.in. with a configurable operation time
power supply. It accepts any single phase from 15 to 180 seconds. The nominal output
input voltages (from 24 to 48 V DC or AC and torque value is constant along the entire stroke.
100 to 240 V DC or AC). Alternatively 3 phase
voltages from 208-240 V AC, 380-480 V AC and Non-intrusive configuration
500‑575 V AC are also available With Bluetooth® wireless technology enabled on
your PDA or PC all configuration requirements
Electric motor thermostat can be undertaken without opening the unit.
A thermostat to protect the motor temperature Direct access to the EPI-2 is then available
in hot applications is included as standard in for configuration and predictive/preventative
the control circuit of the electric actuator. maintenance information, including valve
position, actuator speed, output torque, alarm
Heater and status.
A heater is standard available within the
unit and is powered from the motor power Position monitoring
supply. It is automatically activated when the The EPI-2 provides a local mechanical position
temperature drops below 10°C in order to indication. For remote indication the position
prevent condensation. is detected by a non-contact sensor. The
open and close position are configured via the
Actuator service electronic control card.
The standard actuator is suitable for open/close
and modulating applications. Electronic controls
Internal drive to reverse the actuator rotation
Compact and light design direction via remote control signals with
EPI-2 actuators are very compact and balanced internal 24 V DC or external 24 V DC/AC up to
for easy installation to small valves minimizing 120 V DC/AC power supply.
pipe work stress or loads to the valve shaft.
Output contacts
Actuator configuration 4 latched-type output contacts for fully open/
Each actuator is equipped with 2 rotary fully close remote indication; 1 output contact
switches on the logic board to configure for monitor (loss of power, torque alarm, high
each function and parameter like position, temperature alarm, travel alarm, position
torque, open/close speed and output contacts. sensor, hardware malfunction, local interface
Additionally each optional module has its malfunction, local selector in LOCAL); 1 output
own additional switches for its specific contact for blinker/local selector indication
configuration. (local selector feature only with OM3 installed).

4
Keystone EPI-2 electric actuators
Optional modules and performance

Optional modules

OM1 I/0 additional module OM13 3-wire module

Analog position INPUT 4-20 mA or 0-10 V DC 110/240 V AC
Analog position OUTPUT 4-20 mA or 0-10 V DC 3-wire control module for open/close
4 additional SPST output contacts
Optional Bluetooth interface Bus communication – network interfaces
OM9) Profibus DP V0/V1
Monitor relay OM11) DeviceNet
Information about loss of input signal and
Bluetooth failure are available on monitor relay
output contact.

OM3 local interface

Local/remote selector
OP/CL pushbuttons
2 LEDs for local indication
Available in WP version

Optional modules selection table

Order OM1 I/O OM3 local Bluetooth OM9 PDP OM11 OM13
code additional module interface component V0/V1 DeviceNet 3-wires module
P1 ✓
PA ✓ ✓ ✓
P6 ✓ ✓
P7 ✓ ✓
P3 ✓
5P ✓ ✓
6P ✓ ✓ ✓
5D ✓ ✓
6D ✓ ✓ ✓
PG ✓

Notes
1. Each optional module (OMx) will be provided with its own installation and maintenance instructions.
2. All modules except OM13 are available for both single phase and 3-phase voltage versions.
3. Bluetooth component is integrated in the OM1, OM9 and OM11 card: not available for integration by local
organizations, as a stand alone unit.
4. OM13 is not available with 3-phase supply and for LV version (single phase voltage from 24 to 48 V DC/V AC).

5
Keystone EPI-2 electric actuators
Performance and approvals

Operating times
Nominal torque Operating time (secs 90°) at selected step
Model (Nm / lb.in.) 8 6 4
063/E006 63/600 15 28 48
125/E013 125/1300 15 28 48
250/E025 250/2500 15 28 48
500/E051 500/5100 15 28 48
1000/E091 1000/9100 24 45 80
2000/E171 2000/17700 53 100 180

Times are guaranteed with a tolerance of ±10% on the 90° stroke

Approvals
Waterproof IP66/68 or NEMA 4/4X/6 (NEMA ICS6/NEMA 250)
CAN/CSA C22.2 No 139-10 and UL 429-2009
Explosionproof Ex d e IIB T5 Gb (gas)
Ex tb IIIC T100°C Db (dust)
(prefix c for model 2000)
NEC 500 (FM approval)
Class I, Zone 1 Group IIB
Class II, III, Division 1, Groups E, F,G
Painting ESPC for 1000 hrs salt spray resistance (ASTM D 2247-02 and ASTM B117-97)
Vibration and noise 1 to 500 Hz with 2 g peak acceleration
(IEC60068-2-6-appendix B)
65 dB (grade A) (EN 21680)

6
Keystone EPI-2 electric actuators
Overall dimensions - Models 063/E006-125/E013-250/E025-500/E051-1000/E091

B
b3 b2 b1

X
W

H
øv

h3

h2
W

h1
W
e e F c

Ø
d

A
c

a1

Notes
W = Nr. 4 cable entries M25x1.5 acc. to ISO 724/965-1 (others available as special versions)
X = Space for cover removal
F = ISO 5211 Standard flange (others available)

EPI-2 base unit models 063/E006 TO 1000/E091 - metric (mm / kg)

Model A B H a1 b1 b2 b3 c d e h1 h2 h3 øv x F kg
063/E006 239 272 210 114.0 85 118 69 80.0 63 32 35.5 67.0 67.5 125 175 F07 7.5
125/E013 239 272 230 114.0 85 118 69 80.0 63 32 53.5 86.0 86.5 125 175 F10 9.5
250/E025 295 332 287 129.0 109 154 69 95.0 76 32 63.5 95.0 92.0 180 230 F12 16.5
500/E051 295 332 287 129.0 109 154 69 95.0 76 32 63.5 95.0 92.0 180 230 F12 18.0
1000/E091 340 349 364 138.5 109 171 69 104.5 81 32 140.0 172.5 164.0 240 230 F16 26.0

EPI-2 base unit models 063/E006 TO 1000/E091 - imperial (in / lb)

Model A B H a1 b1 b2 b3 c d e h1 h2 h3 øv x F lb
063/E006 9.4 10.7 8.3 4.5 3.3 4.6 2.7 3.1 2.5 1.3 1.4 2.6 2.7 4.9 6.9 F07 17
125/E013 9.4 10.7 9.1 4.5 3.3 4.6 2.7 3.1 2.5 1.3 2.1 3.4 3.4 4.9 6.9 F10 21
250/E025 11.6 13.1 11.3 5.1 4.3 6.1 2.7 3.7 3.0 1.3 2.5 3.7 3.6 7.1 9.1 F12 36
500/E051 11.6 13.1 11.3 5.1 4.3 6.1 2.7 3.7 3.0 1.3 2.5 3.7 3.6 7.1 9.1 F12 40
1000/E091 13.4 13.7 14.3 5.5 4.3 6.7 2.7 4.1 3.2 1.3 5.5 6.8 6.5 9.4 9.1 F16 57

7
Keystone EPI-2 electric actuators
Overall dimensions - Model 2000/E171

B
b3 b2 b1

X
W
W
øv

H
h2
h3

h1
W

e e
c
F

*
d
A

A1
c
a1

a11

Notes
W = Nr. 4 cable entries M25x1.5 acc. to ISO 724/965-1 (others available as special versions)
X = Space for cover removal
F = ISO 5211 Standard flange (others available)

EPI-2 Model 2000/E171 - metric (mm / kg)

Model A A1 B H a1 a11 b1 b2 b3 c d e h1 h2 h3 øv x F kg
2000/E171 340 387 506 464 138.5 185.5 266 171 69 104.5 81 32 240 272.5 264 240 230 F10-F14 45.0
2000/E171 340 387 506 464 138.5 185.5 266 171 69 104.5 81 32 240 272.5 264 240 230 F12-F16 46.5

EPI-2 Model 2000/E171 - imperial (in / lb)

Model A A1 B H a1 a11 b1 b2 b3 c d e h1 h2 h3 øv x F lb
2000/E171 13.4 15.2 19.9 18.3 5.5 7.3 10.5 6.7 2.7 4.1 3.2 1.3 9.4 10.7 10.4 9.4 9.1 F10-F14 99
2000/E171 13.4 15.2 19.9 18.3 5.5 7.3 10.5 6.7 2.7 4.1 3.2 1.3 9.4 10.7 10.4 9.4 9.1 F12-F16 103

8
Keystone EPI-2 electric actuators
Overall dimensions - optional modules

X/X1
H/H1
A/A1
a1/a11

Notes
1. Dimensions a1 and A are for the standard unit.
2. Dimensions a11 and A1 are for the standard unit plus a local interface option.
3. Dimensions H and X are for the standard unit.
4. Dimensions H1 and X1 are for the standard unit plus a Beacon type indicator.
5. X / X1 indicates the space for cover removal.
6. All other dimensions are as the standard unit.

EPI-2 with optional modules - metric (mm / kg)

Model A A1 a1 a11 H H1 X X1 kg[1] kg[2]
063/E006 239 285 114.0 160.0 210 270 175 265 7.5 8.0
125/E013 239 285 114.0 160.0 230 290 175 265 9.5 10.0
250/E025 295 341 129.0 175.0 287 347 230 330 15.5 16.0
500/E051 295 341 129.0 175.0 287 347 230 330 17.0 17.5
1000/E091 340 387 138.5 185.5 364 425 230 330 23.0 26.5

EPI-2 with optional modules - imperial (in / lb)

Model A A1 a1 a11 H H1 X X1 lb[1] lb[2]
063/E006 9.4 11.2 4.5 6.3 8.3 10.6 6.9 10.4 17 18
125/E013 9.4 11.2 4.5 6.3 9.1 11.4 6.9 10.4 21 22
250/E025 11.6 13.4 5.1 6.9 11.3 13.7 9.1 13.0 34 35
500/E051 11.6 13.4 5.1 6.9 11.3 13.7 9.1 13.0 37 39
1000/E091 13.4 15.2 5.5 7.3 14.3 16.7 9.1 13.0 51 58

1. Weight with Beacon option module

2. Weight with local interface module

9
Keystone EPI-2 electric actuators
Output drive dimensions

ℓ
ødx ødx

ød7

ax
ød7

m
SQ

Notes
1. Insert bush supplied with unmachined bore.
Largest bore can be supplied with solid piece bush.
2. Fixing bolts or rods supplied only on request.
3. dx: the maximum accepted diameter described by key, square or flat machining.
4. Position of the shaft with the valve closed.

Output drive EN ISO 5211 Standard

EN ISO 5211 Output drive dimensions (mm/in) Order Output drive dimensions (mm/in) Order
Model flange Style square l* code Flat Bore diameter Key l* code
063/E006 F05-F07 17/0.66 35/1.36 D4 14xD20 / 0.55xD0.78 - - 35/1.36 E3
125/E013 F07-F10 22/0.86 54/2.11 D5 22xD30 / 0.86xD1.18 - - 54/2.10 E5
250/E025 F07-F10-F12 22/0.86 54/2.11 D5 22xD30 / 0.86xD1.18 - - 54/2.11 E5
500/E051 F10-F12 27/1.05 62/2.42 D6 - D35 / D1.37 10x8 / 0.39x0.31 62/2.42 E6
1000/E091 F10-F14 36/1.41 40/1.56 D7 - - - - -
1000/E091 F12-F16 36/1.41 40/1.56 DA - D50 / D1.96 14x9 / 0.55x0.35 80/3.12 E9
2000/E171 F10-F14 36/1.41 40/1.56 D7 - - - - -
2000/E171 F12-F16 36/1.41 40/1.56 DA - D50 / D1.96 14x9 / 0.55x0.35 80/3.12 E9

* Insert length (mm/in)

Output drive K type non-ISO flanges

Output drive dimensions (mm/in)
Model K flange Flat Bore diameter Key l* Order code
063/E006 44.45-82.55 / 1.75-3.25 12.7xD19 / 0.5xD0.74 - - 35/1.36 U4
125/E013 82.55 / 3.25 - D28.7 / D1.12 6.35x6.35 / 0.25x0.25 54/2.11 U8
250/E025 82.55-127 / 3.25-5 - D28.7 / D1.12 6.35x6.35 / 0.25x0.25 54/2.11 U8
500/E051 82.55-127 / 3.25-5 - D41.38 / D1.62 9.53x9.53 / 0.375x0.375 62/2.42 UA
1000/E091 127-165 / 5-6.5 - D47.73 / D1.87 12.7x12.7 / 0.5x0.5 108/4.21 UC
2000/E171 127-165 / 5-6.5 - D47.73 / D1.87 12.7x12.7 / 0.5x0.5 108/4.21 UC

* Insert length (mm/in)

Output drive non-standard

Output drive dimensions (mm/in)
Model Ø d7 max Ø dx max SQ max l*
063/E006 17/0.66 23/0.90 17/0.66 35/1.36
125/E013 22/0.89 29/1.13 22/0.89 54/2.11
250/E025 28/1.09 37/1.44 27/1.05 54/2.11
500/E051 28/1.09 37/1.44 27/1.05 62/2.42
1000/E091 40/1.56 49/1.91 36/1.41 108/4.21
2000/E171 40/1.56 49/1.91 36/1.41 108/4.21

* Insert length (mm/in)

10
Keystone EPI-2 electric actuators
Wiring diagram - base version

Blinker
local
Monitor selector
relay relay CLC1 CLC2 OPC1 OPC2

L1 L2 L3 35 36 32 33 34 1 2 3 4 20 21 22 23 24 25 26 27 28 29 30 31
Ground

Note 1 Remote commands Note 6 Output contacts Optional module

(Note 2, 5) (Note 3, 4) OM3

Notes
1. Power connection L1-L2 for V DC or V AC single phase motor supply from 24 V to 48 V or from 100 V to 240 V.
Power connection L1-L2-L3 for 3 phase motor supply from 208 V to 575 V (check the actuator label for the correct voltage to be applied).

2. Remote command options.

OP OP
34 35 35
OP
35 CL CL
36 36
CL
36 32 32
32
Internal supply 24 V DC External supply 24 / 120 V AC External supply 24 / 120 V DC
33

3. Contacts shown in intermediate position CLC1-CLC2 end of travel signaling in closing.

Contacts shown in intermediate position OPC1-OPC2 end of travel signaling in opening.

4. Output contact rating 240 V AC / 5 A ; 30 V DC / 5A ; 120 V DC / 0.5 A.

5. Control command rating 24 to 120 V AC or DC.

6. Blinker or local selector monitoring function (when OM3 is present) to be configured.

11
Keystone EPI-2 electric actuators
Current absorption - single phase and DC voltage

Current absorption - single phase and DC voltage

Selected Operating time Current absorption (A)
Model step (secs/90°) 24 V AC 48 V AC 90 V AC 110 V AC 230 V AC 264 V AC 24 V DC 48 V DC 90 V DC 110 V DC 230 V DC 264 V DC
063/E006 8 15 2.26 1.01 0.590 0.473 0.334 0.289 2.02 1.01 0.605 0.476 0.222 0.196
6 28 1.60 0.84 0.405 0.334 0.253 0.217 1.53 0.75 0.415 0.343 0.158 0.138
4 48 1.38 0.73 0.317 0.265 0.209 0.176 1.30 0.64 0.318 0.260 0.120 0.106
125/E013 8 15 4.20 1.70 0.980 0.810 0.430 0.420 4.50 1.81 1.040 0.820 0.390 0.340
6 28 2.60 1.28 0.780 0.630 0.370 0.340 2.65 1.27 0.810 0.640 0.300 0.260
4 48 2.04 1.00 0.680 0.560 0.340 0.290 2.10 0.96 0.720 0.570 0.270 0.220
250/E025 8 15 10.30 4.90 2.440 1.970 0.920 0.800 9.70 4.80 2.520 1.950 0.900 0.780
6 28 8.20 3.80 1.650 1.350 0.640 0.570 7.20 3.60 1.650 1.320 0.630 0.540
4 48 6.40 3.30 1.440 1.170 0.560 0.500 6.80 3.20 1.460 1.140 0.540 0.470
500/E051 8 15 14.50 6.80 3.200 2.520 1.150 1.000 14.00 7.00 3.220 2.530 1.120 0.980
6 28 9.50 4.60 1.900 1.550 0.760 0.670 9.30 4.50 1.920 1.540 0.720 0.620
4 48 7.00 3.40 1.550 1.240 0.600 0.530 7.10 3.40 1.510 1.240 0.580 0.500
1000/E091 8 24 14.50 6.80 3.200 2.520 1.150 1.000 14.00 7.00 3.220 2.530 1.120 0.980
6 45 9.50 4.60 1.900 1.550 0.760 0.670 9.30 4.50 1.920 1.540 0.720 0.620
4 80 7.00 3.40 1.550 1.240 0.600 0.530 7.10 3.40 1.510 1.240 0.580 0.500
2000/E171 8 53 14.50 6.80 3.200 2.520 1.150 1.000 14.00 7.00 3.220 2.530 1.120 0.980
6 100 9.50 4.60 1.900 1.550 0.760 0.670 9.30 4.50 1.920 1.540 0.720 0.620
4 180 7.00 3.40 1.550 1.240 0.600 0.530 7.10 3.40 1.510 1.240 0.580 0.500

Notes
1. A = absorbed current (Amp) at nominal conditions (output torque 100%)
2. Max current (Amp) at stall conditions = 1.2 x A
3. Power factor for V AC supply = 0.60
4. Peak current: max 8xIn
5. Peak current duration: less than 0.1 secs

12
Keystone EPI-2 electric actuators
Current absorption - three phase voltage

Current absorption - three phase voltage

Operating time Current absorption (A)
Model Selected step (secs/90°) 208 V AC 240 V AC 380 V AC 400 V AC 480 V AC 500 V AC 575 V AC
063/E006 8 15 0.226 0.176 0.107
6 28 0.165 0.101 0.080
4 48 0.132 0.083 0.057
125/E013 8 15 0.344 0.227 0.171
6 28 0.295 0.180 0.143
4 48 0.245 0.155 0.125
250/E025 8 15 0.800 0.73 0.52 0.49 0.37 0.340
6 28 0.590 0.56 0.41 0.35 0.29 0.280
4 48 0.530 0.50 0.37 0.30 0.27 0.250
500/E051 8 15 1.073 0.97 0.65 0.58 0.46 0.430
6 28 0.720 0.64 0.47 0.39 0.32 0.310
4 48 0.590 0.55 0.41 0.32 0.29 0.280
1000/E091 8 24 1.073 0.97 0.65 0.58 0.46 0.430
6 45 0.720 0.64 0.47 0.39 0.32 0.310
4 80 0.590 0.55 0.41 0.32 0.29 0.280
2000/E171 8 53 1.073 0.97 0.65 0.58 0.46 0.430
6 100 0.720 0.64 0.47 0.39 0.32 0.310
4 180 0.590 0.55 0.41 0.32 0.29 0.280

Notes
1. A = absorbed current (Amp) at nominal conditions (output torque 100%)
2. Max current (Amp) at stall conditions = 1.2 x A
3. Power factor for V AC supply = 0.60
4. Peak current: max 8xIn
5. Peak current duration: less than 0.1 secs

13
Keystone EPI-2 electric actuators
Ordering information

Selection guide
Example KPD 063 LV PD P1 2 D4
Product
KPD ISO 5211 with double star insert
KPE ISO 5211 with flat or key insert
KPU Non-ISO flange
KPB ISO 5211 flange - insert not machined
KPK Key non-ISO flange - insert not machined
KEU (NPT) US version ISO 5211 flange
with ISO insert, 4x 1"NPT entries
Models
063 Model 063/E006 06B Model 063/E006 with Beacon
125 Model 125/E013 12B Model 125/E013 with Beacon
250 Model 250/E025 25B Model 250/E025 with Beacon
500 Model 500/E051 50B Model 500/E051 with Beacon
1K0 Model 1000/E091 1KB Model 1000/E091 with Beacon
2K0 Model 2000/E171 2KB Model 2000/E171 with Beacon
Voltage
LV 1-phase 24-48 V AC/DC 3A 3-phases 208-240 V AC
HV 1-phase 100-240 V AC/DC 3B 3-phases 380-480 V AC
3C 3-phases 500-575 V AC
Speed/Duty
PD Standard speed range and standard duties for model 063/E006 to 500/E051
PE Standard speed range and standard duties for model 1000/E091
PF Standard speed range and standard duties for model 2000/E171
Option modules
00 No optional modules P7 OM1/Bluetooth 5D OM11/Bluetooth
P1 OM1 P3 OM3 6D OM11/OM3/Bluetooth
PA OM1/OM3/Bluetooth 5P OM9/Bluetooth PG OM13
P6 OM1/OM3 6P OM9/OM3/Bluetooth
Approvals/Protections
0 Standard protection NEMA 4/4X/6 (IP66/68M) - CSA certificate T°amb from -40°C to +60°C / -40°F to +140°F
2 Standard protection NEMA 4/4X/6 (IP66/68M) T°amb from -25°C to +70°C / -13°F to +158°F
3 Standard protection NEMA 4/4X/6 (IP66/68M) T°amb from -40°C to +70°C / -40°F to +158°F
4 Explosionproof IP66/68 (NEMA 4/4X/6) + Ex d e IIB T5 Gb - EX tb IIC T100°C Db T°amb from -20°C to +65°C / -4°F to +149°F
(prefix c for model 2000)
9 Explosionproof IP66/68 (NEMA 4/4X/6) + Ex d e IIB T5 Gb - EX tb IIIC T100°C Db T°amb from -40°C to +65°C / -40°F to +149°F
(prefix c for model 2000)
6 Explosionproof NEC 500 (FM approval) Class I, Zone 1 Group IIB , Class II, III, Division 1, Groups E, F,G
Flange/Insert
00 No flange insert
B4 Model 063/E006 flange ISO 5211/F05/F07 - insert not machined (KPB)
B5 Model 125/E013 flange ISO 5211/F07/F10 - insert not machined (KPB)
B5 Model 250/E025 flange ISO 5211/F07/F10/F12 - insert not machined (KPB)
B6 Model 500/E051 flange ISO 5211/F10/F12 - insert not machined (KPB)
B7 Models 1000/E091-2000/E171 flange ISO 5211/F10/F14 - insert not machined (KPB)
BA Models 1000/E091-2000/E171 flange ISO 5211/F12/F16 - insert not machined (KPB)
D4 Model 063/E006 ISO 5211 (KPD)
D5 Models 125/E013-250/E025 ISO 5211 (KPD)
D6 Model 500/E051 ISO 5211 (KPD)
D7 Models 1000/E091-2000/E171 F10 to F14 ISO 5211 (KPD)
DA Models 1000/E091-2000/E171 F12 to F16 ISO 5211 (KPD)
E3 Model 063/E006 ISO 5211 (KPE)
E5 Models 125/E013-250/E025 ISO 5211 (KPE)
E6 Model 500/E051 ISO 5211 (KPE)
E9 Models 1000/E091-2000/E171 F12 to 16 ISO 5211 (KPE)
K4 Model 063/E006 flange key 44.45-82.6 - insert not machined (KPK)
K8 Model 125/E025 flange key 82.6 - insert not machined (KPK)
K8 Model 250/E025 flange key 82.6-127 - insert not machined (KPK)
KA Model 500/E051 flange key 82.6-127 - insert not machined (KPK)
KC Models 1000/E091-2000/E171 flange key 127-165 - insert not machined (KPK)
U4 Model 063/E006 non-ISO (KPU)
U8 Models 125/E013-250/E025 non-ISO (KPU)
UA Model 500/E051 non-ISO (KPU)
UC Models 1000/E091-2000/E171 non-ISO (KPU)

14
Keystone EPI-2 electric actuators
Ordering information

Ordering Information - US markets only

Example E 006 A L W5 00 0
Model
E EPI-2 quarter-turn electric
Size
006 Model E006
013 Model E013
025 Model E025
051 Model E051
091 Model E091
171 Model E171
Local indicator
A Standard window
Voltage ratings
L 1-phase 24-48 V AC/DC
H 1-phase 100-240 V AC/DC
A 3-phases 208-240 V AC
B 3-phases 380-480 V AC
C 3-phases 500-575 V AC
Classification and temperature rating
W1 NEMA 4/4X/6 (IP66/68M)
Ambient temp: -13°F to 158°F (-25°C to 70°C)
W2 NEMA 4/4X/6 (IP66/68M)
Ambient temp: -40°F to 158°F (-40°C to 70°C)
W5 CSA 139 (C-US)
NEMA 4/4X/6 (IP66/68M)
AWWA
Ambient temp: -40°F to 140°F (-40°C to 60°C)
X5 NEC 500 (FM approval)
Class I, Zone 1 Group IIB , Class II, III, Division 1, Groups E, F,G
Ambient temp: -40°F to 149°F (-40°C to 65°C)
Option modules
00 NONE, standard On-Off configuration
P1 Servoamp w/retransmission (OM1)
P3 Local interface (OM3)
P6 Servoamp w/retransmission, local interface (OM1/OM3)
P7 Servoamp w/retransmission, Bluetooth® communication (OM1/Bluetooth)
PA Servoamp w/retransmission, local interface, Bluetooth® communication (OM1/OM3/Bluetooth)
3D DeviceNet™ bus communication (OM11)
5D DeviceNet™ bus communication, Bluetooth® communication (OM11/Bluetooth)
6D DeviceNet™ bus communication, local interface, Bluetooth® communication (OM11/OM3/Bluetooth)
3P PDP V0/V1 bus communication (OM9)
5P PDP V0/V1 bus communication, Bluetooth® communication (OM9/Bluetooth)
6P PDP V0/V1 bus communication, local interface, Bluetooth® communication (OM9/OM3/Bluetooth)
PG 3-wire interface card (OM13)
Special option code
0 Standard

15
© 2017 Emerson. All rights reserved. 16