W 3-Y

ar ea
ra r
nt
2220, 2220G, Multi-Channel USB and USB/GPIB y
2230, 2230G Programmable DC Power Supplies
Multi-channel programmable DC power supplies

Multi-channel programmable DC power supplies

• Dual and triple output The Models 2220, 2220G, 2230, and 2230G Multi-Channel Programmable DC Power Supplies com-
models with two 30V/1.5A bine two and three channels of output power to cost-effectively characterize and test a wide range of
(45W) channels and a 6V/5A devices, circuit boards, modules, and products that require more than one power source. The Models
(30W) channel on the triple 2220-30-1 and 2220G-30-1 s­ upplies provide two channels, with each channel capable of outputting
output supply up to 30V and up to 1.5A. The Models 2230-30-1 and 2230G-30-1 include two 30V/1.5A channels
and add a 6V channel with up to 5A output for powering digital circuits. These multi-channel power
• All channels are independently supplies offer an excellent combination of performance, versatility, and ease of use to maximize the
controlled and have isolated information from characterization or test as quickly and as easily as possible. They perform as effec-
outputs for maximum flexibility tively in automated test systems as they do in manual instrument configurations. The USB interface is
• All channels have remote standard on all models; the “G” versions add a GPIB interface.
sensing to ensure that Independent and Isolated Outputs
programmed voltage is
accurately applied to the load Since each channel in these multi-channel power supplies is completely independent and isolated
from each other, these power supplies can be used to provide power to two circuits that are optically
• Two 30V channels can be isolated or transformer-isolated from each other and have different reference points. Their isolated
combined either in series to channels eliminate the need for a second power supply to power one of the isolated circuits.
double output voltage or in
parallel to double output current Additionally, each channel can be independent-
ly controlled, so channels can be individually 2230-30-1 TRIPLE CHANNEL DC POWER SUPPLY

• 0.03% basic voltage output turned on and turned off at any time. Thus,
accuracy and 0.1% current these power supplies can be used to power up a CH1 0-30V CH2 0-30V CH3 0-5.5V

accuracy ensure quality test data circuit with multiple voltage levels (such as a dig-
ital circuit) that must be turned on in a specified
• Low noise, linear regulation with time sequence. Furthermore, the timer capability
<3mVpp ripple and noise allows you to set up unattended tests that turn
• Voltage and current outputs off the channels after a programmed time inter-
for all channels are displayed val to protect a device-under-test (DUT) from
+ – – +
simultaneously for easy potential damage due to the continuous appli-
observation of each output state cation of power beyond a recommended time
interval. Both isolated and independent chan-
• Keypad entry allows fast, precise nels provide excellent versatility and flexibility to
entry of output values address a wide range of test ­applications.
• USB interface standard on all Accurate Power Delivery to the Load
DC POWER SUPPLIES

versions for remote control; “G”

versions include USB and GPIB With basic voltage setting accuracy and voltage
interfaces readback accuracy of 0.03% for each channel, Power two isolated circuits with isolated
the exact voltage programmed for any channel output channels.
is applied at the output terminals. Plus, the
rear panel connections for each channel include remote sense terminals that compensate for voltage
drops in the power supply leads. This helps to ensure that the correct voltage is delivered accurately
to the load terminals of the DUT. Many other multi-channel power supplies do not provide remote
sensing, which reduces overall system accuracy.

1.888.KEITHLEY (U.S. only)

www.keithley.com
A Greater Measure of Confidence
 2220, 2220G, Multi-Channel USB and USB/GPIB
2230, 2230G Programmable DC Power Supplies
Great accuracy is not limited to voltage; the basic current setting and readback accuracy is 0.1%, pro-
Ordering Information viding high quality load current measurements. Also, with less than 3mV p-p noise, the power applied
2220-30-1 to the DUT’s load terminals is both accurate and of high quality.
Programmable Dual Channel Excellent accuracy, remote sensing, and a wide power output range make the Series 2200 Multi-
DC Power Supply
Channel DC Power Supplies essential test instruments both on the bench and in test systems. Their
2220G-30-1 ability to generate a wide range of output power and measure a wide range of load currents is
Programmable Dual Channel DC supported with:
Multi-channel programmable DC power supplies

Multi-channel programmable DC power supplies

Power Supply with GPIB Interface
2220J-30-1 • Maximum output power of 45W on the 30V channels
Programmable Dual Channel • Maximum output power of 30W on the 6V channel
DC Power Supply for Japan
• Voltage setting and reading resolution of 1mV
2220GJ-30-1
Programmable Dual Channel • Current setting and reading resolution of 1mA
DC Power Supply with GPIB
Interface for Japan Configure the Channels to Double Output Voltage or
2230-30-1 Current or Create Bipolar Power Supplies
Programmable Triple The two 30V channels can be combined if more than 30V or more than 1.5A is required. The two
Channel DC Power Supply 30V outputs can be wired in series to enable an output of 60V with a maximum current output of
2230G-30-1 1.5A or can be wired in parallel to get up to 3A at 30V. In series or parallel configurations, the power
Programmable Triple Channel DC supplies offer special display modes that indicate the actual voltage and current for the combined
Power Supply with GPIB Interface pair. It’s also easy to wire the outputs to make a ±30V bipolar supply and to maintain a user-defined
2230J-30-1 ratio between the two outputs when using Tracking mode. These modes of operation extend the per-
Programmable Triple Channel formance of the power supplies, while the display shows the actual outputs in these special modes to
DC Power Supply for Japan avoid any confusion or incorrect interpretation of the displayed data.
2230GJ-30-1
Programmable Triple Channel
DC Power Supply with GPIB
Interface for Japan +
Power 0-30V 0-30V 0-6V V1
Channel 1 Supply +
Accessories Supplied Channel 1
Device
Under
Device
Under
Test Test
CS-1655-15 Rear Panel Mating + –
–

V2
Connector for Models 2220 and 2230 V+ –
Multi-Channel DC Power Supplies Load
(Device, Circuit, V1 + V2
Documentation and Driver CD Module)
V–
– + 0-30V 0-30V 0-6V

Accessories Available +
Device Device
Channel 2 Power Under V1 V2 Under
CS-1655-15 Rear Panel Mating Connector for (relative to Supply –
Test Test

Series 2200 Power Supplies circuit common) Channel 2

Model Number JUMPER (example: 2230-30-1 JUMPER) I1 + I2
Shorting Jumper for CS-1655-15 Connector
4299-7 Universal Fixed Rack Mount Kit
RMU2U Fixed Rack Mount Kit
386-7598-xx RMU2U Rack Mount Cosmetic Filler Panel Use the two 30V channels to test a bipolar Combine two channels in series to output up
USB-1-1 USB Cable integrated circuit or a bipolar module over its to 60V or combine two channels in parallel
KPCI-488LPA IEEE-488.2 Interface Board for the PCI Bus specified voltage operating range. to output up to 3A. The Model 2220/2230
7007-05 Double Shielded Premium IEEE-488 Interface display will show the combined value.
Cables, 0.5m (1.6 ft)
DC POWER SUPPLIES

7007-1 Double Shielded Premium IEEE-488 Interface

Cables, 1m (3.2 ft) Convenience Features Help Get Results More Quickly
7007-2 Double Shielded Premium IEEE-488 Interface These multi-channel power supplies offer a number of features that return results quickly and easily:
Cables, 2m (6.5 ft)
7007-3 Double Shielded Premium IEEE-488 Interface • A rotary knob, with user-selectable step size, makes it easy to check circuit response to changing
Cables, 3m (10 ft) voltage or current. Alternatively, a direct-entry numeric keypad can be used to simplify setting
7007-4 Double Shielded Premium IEEE-488 Interface precise voltage and current values.
Cables, 4m (13 ft)
• Each channel has its own readout on the display. The voltage and current being delivered to each
channel are visible at a glance. A bright vacuum fluorescent display provides excellent readability
at a distance, at an angle, or under dim lighting conditions.

1.888.KEITHLEY (U.S. only)

www.keithley.com
A Greater Measure of Confidence
 2220, 2220G, Multi-Channel USB and USB/GPIB
2230, 2230G Programmable DC Power Supplies
• To save time when repeating tests, instrument Specifications
settings can be saved in one of 30 internal
2230-30-1, 2230J-30-1, 2220-30-1, 2220J-30-1,
memory locations by simply pressing the Save 2230G-30-1, 2230GJ-30-1 2220G-30-1, 2220GJ-30-1
button. To recall that setting, just push the DC Output Rating
Recall button, and choose the desired setup.
Voltage 0 to 30 V 0 to 30 V 0 to 6 V 0 to 30 V 0 to 30 V
Protection for Your Device-Under-Test Current 0 to 1.5 A 0 to 1.5 A 0 to 5 A 0 to 1.5 A 0 to 1.5 A
Maximum Power 120 W 90 W
These multi-channel power supplies include
Load Regulation
maximum voltage settings that prevent volt-
age from being accidentally adjusted above Voltage < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV
Models 2220 and 2230 specifications

Models 2220 and 2230 specifications

user-specified limits. Independent outputs allow Current < 0.01% + 3 mA < 0.01% + 3 mA < 0.01% + 3 mA < 0.01% + 3 mA < 0.01% + 3 mA
a different limit to be specified for each output Line Regulation
channel. With the numeric keypad, a current Voltage < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV
limit can be quickly and precisely specified Current < 0.1% + 3 mA < 0.1% + 3 mA < 0.1% + 3 mA < 0.1% + 3 mA < 0.1% + 3 mA
before a test is started. In addition, a user- Ripple and Noise
definable password allows the front panel Voltage (7MHz)
< 1 mV rms < 1 mV rms < 1 mV rms < 1 mV rms < 1 mV rms
to be locked to prevent unwanted adjustment < 3 mV p-p < 3 mV p-p < 3 mV p-p < 3 mV p-p < 3 mV p-p
during critical tests. Current (20MHz) < 5 mA rms < 5 mA rms < 6 mA rms < 5 mA rms < 5 mA rms
Setting Resolution
Easy Test Automation Voltage 1 mV 1 mV 1 mV 1 mV 1 mV
Two interface choices are available to enable Current 1 mA 1 mA 1 mA 1 mA 1 mA
PC control from a user-preferred programming Setting Accuracy
environment. A USB TMC-compliant device port Voltage ± 0.03% + 10 mV ± 0.03% + 10 mV ± 0.03% + 10 mV ± 0.03% + 10 mV ± 0.03% + 10 mV
is included on all versions of these power sup- Current ± 0.1% + 5 mA ± 0.1% + 5 mA ± 0.1% + 5 mA ± 0.1% + 5 mA ± 0.1% + 5 mA
plies. The “G” versions add the GPIB interface Meter Resolution
for the flexibility of either USB or GPIB control. Voltage 1 mV 1 mV 1 mV 1 mV 1 mV
LabView and IVI drivers are provided to facilitate Current 1 mA 1 mA 1 mA 1 mA 1 mA
instrument control, data logging, and analysis. Meter Accuracy
With these drivers, the power supplies can be Voltage ± 0.03% + 10 mV ± 0.03% + 10 mV ± 0.03% + 10 mV ± 0.03% + 10 mV ± 0.03% + 10 mV
controlled from most commercially-available Current ± 0.1% + 5 mA ± 0.1% + 5 mA ± 0.1% + 5 mA ± 0.1% + 5 mA ± 0.1% + 5 mA
software packages such as MatLab. Thus, these
power supplies can be controlled as a single unit Isolation Voltage, Output to Chassis: Any output Rear panel Connections: USB Device Port, Type B
or as part of an automated test system. can be floated up to 240V (DC + peak AC with AC limited to connector, USBTMC compatible. 2220G and 2230G versions
a maximum of 3Vpk-pk and a maximum frequency of 60Hz) include a GPIB interface, IEEE-488.2 compliant.
APPLICATIONS relative to earth ground terminal.
Isolation Voltage, Output to Output: Any output can Power Source
Typical applications include: be floated up to 240V (DC + peak AC with AC limited to a AC Input: Non-“J” versions: Switchable between 120VAC or
maximum of 3Vpk-pk and a maximum frequency of 60Hz)
• Circuit design relative to any other output terminal.
240VAC, nominal (different fuse required for each voltage).
“J” Versions: 100VAC, nominal.
• Electrial engineering student labs Voltage Transient Response Settling Time, Load FREQUENCY: 50/60Hz
Change (typical): <150ms to within 75mV following
• Materials research a change from 0.1A to 1A. Power Consumption:
Dual Channel Versions: 350VA.
• Automated test Voltage Transient Response Settling Time, Setting Triple Channel Versions: 450VA.
Change, Rising (typical): <150ms to within 75mV
following a change from 1V to 11V into a 10W resistor (Ch. 1,
2); from 0.4V to 4V into a 4W resistor (ch. 3.) Physical Characteristics
Services Available Protective boots and handle installed:
Voltage Transient Response Settling Time, Setting
Model Number*-EW 1 additional year of factory warranty Change, Falling (typical): <150ms to within 75mV Height: 105.3mm (4.15 in.)
Model Number-5Y-EW 2 additional years of factory warranty following a change from 11V to 1V into a 10W resistor (Ch. 1, Width: 241.8mm (9.52 in.)
beyond the standard 3-year warranty 2); from 0.4V to 4V into a 4W resistor (ch. 3.) Depth: 384.0mm (15.12 in.)
DC POWER SUPPLIES
C/Model Number-3Y-STD 3 calibrations within 3 years of purchase Display: Vacuum fluorescent display. Protective boots and handle removed:
C/Model Number-3Y-DATA 3 (ANSI-Z540-1 compliant) Memory: 30 setup memories. Height: 90.7mm (3.57 in.)
calibrations within 3 years of purchase Width: 217.2mm (8.55 in.)
Tracking and Combination Modes:
C/Model Number-5Y-STD 5 calibrations within 5 years of purchase Tracking Mode: Maintains the ratio on the two 30V output Depth: 361.6mm (14.24 in.)
C/Model Number-5Y-DATA 5 (ANSI-Z540-1 compliant) channels that is present when the control is activated. Net Weight:
calibrations within 5 years of purchase Combination V1+V2 Series Mode: Deliver up to 60 V when 2220-30-1: 8.2 kg (18 lb.)
* Replace “Model Number” with a power supply model number. CH1 and CH2 are wired in series. Meter reads back com- 2230-30-1: 8.5 kg (19 lb.)
For example: if the 2230GJ-30-1 is selected, then the part bined voltage. Shipping Weight:
number for the -EW, one year of additional warranty option, Combination I1+12 Parallel Mode: Deliver up to 3 A when 2220-30-1: 11 kg (24 lb.)
is 2230GJ-30-1-EW. CH1 and CH2 are wired in parallel. Meter reads back 2230-30-1: 11 kg (24 lb.)
NOTE: the “J” versions truncate the “A” in DATA. ­combined ­current.
Example: C/222GJ-30-1-3Y-DAT

1.888.KEITHLEY (U.S. only)

www.keithley.com
A Greater Measure of Confidence
 2220, 2220G, Multi-Channel USB and USB/GPIB
2230, 2230G Programmable DC Power Supplies
Environmental and Safety
Temperature: Operating: 0° to +40°C.
Storage: –20° to +70°C.
Relative Humidity (non-condensing):
Operating: 5% to 95% relative humidity at up to +40°C.
Storage: 5% to 95% relative humidity at up to +40°C. 5% to 60% RH above +40°C up to +70°C, non
condensing.
Altitude:
Operating: Up to 2000m.
Storage: Up to 4000m.
Models 2220 and 2230 specifications

Models 2220 and 2230 specifications

Safety:
European Union: Complies with European Union EMC Directive.
USA: Nationally recognized testing laboratory listing UL61010-1-2004.
Canada: CAN/CSA C22.2 No. 61010-1 2004.
Model 2220-30-1 rear panel. The Model 2220G-30-1 adds a GPIB
connector.
Electromagnetic Compatibility
European Union: Complies with European Union Low Voltage Directive.
Australia: EMC Framework, demonstrated per Emission Standard AS/NZS 2064 (Industrial,
Scientific, and Medical Equipment).

Model 2230G-30-1 rear panel. The Model 2230-30-1 does not have the
GPIB connector.

Specifications are subject to change without notice. All Keithley trademarks and trade names are the property of Keithley Instruments, Inc.
All other trademarks and trade names are the property of their respective companies.

A Greater Measure of Confidence

KEITHLEY INSTRUMENTS, INC. ■ 28775 AURORA RD. ■ CLEVELAND, OH 44139-1891 ■ 440-248-0400 ■ Fax: 440-248-6168 ■ 1-888-KEITHLEY ■ www.keithley.com
DC POWER SUPPLIES

BENELUX FRANCE ITALY MALAYSIA SINGAPORE

+31-40-267-5506 +33-01-69-86-83-60 +39-049-762-3950 60-4-643-9679 01-800-8255-2835
www.keithley.nl www.keithley.fr www.keithley.it www.keithley.com www.keithley.com.sg

BRAZIL GERMANY JAPAN MEXICO TAIWAN

55-11-4058-0229 +49-89-84-93-07-40 81-120-441-046 52-55-5424-7907 886-3-572-9077
www.keithley.com www.keithley.de www.keithley.jp www.keithley.com www.keithley.com.tw

CHINA INDIA KOREA RUSSIA UNITED KINGDOM

86-10-8447-5556 080-30792600 82-2-6917-5000 +7-495-664-7564 +44-1344-39-2450
www.keithley.com.cn www.keithley.in www.keithley.co.kr www.keithley.ru www.keithley.co.uk

For further information on how to purchase or to locate a sales partner please visit www.keithley.com/company/buy

© Copyright 2013 Keithley Instruments, Inc. Printed in the U.S.A No. 3187 11.15.13