Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-6270-G Blower Service Tool Set 71/92 Air Intake
J-24094 Cup Plug Driver 53/71/92 Camshaft
J-21278-A Seal Installer 53 Crankshaft
J-21983 Rear Oil Seal Installer 71/92 Crankshaft
J-22153 Crankshaft FR. Oil Seal Installer 53/Marine/Military Crankshaft
J-22425-B Rear Oil Seal Exp. 53/71 Crankshaft
J-22518 Bearing and Seal Installer 149 Crankshaft
J-22524 Crank Sleeve installer 53 Crankshaft
J-22605 Rear Seal Expander 149 Crankshaft
J-2276 O\S Oil Seal 149 Crankshaft
J-3154-04 Oil Seal Remover Set 53/71/92/149 Crankshaft
J-35686-B Frt\Rear Oil seal Installer NA Crankshaft
J-35993 Oil Seal Remover 92 Crankshaft
J-36237 Engine Barring Tool Assembly 92 Crankshaft
J-37075-A Crank Wear Sleeve Remover 71/92 Crankshaft
J-4239 Oil Seal Expander 71/92 Crankshaft
J-5356 Crankshaft Pulley Remover 71/92 Crankshaft
J-8682 Crank Oil Seal Installer 71/92 Crankshaft
J-8682 Universal Driver Handle 3/4-10 71/92 Crankshaft
J-9479 Oil Seal Installer 53 Crankshaft
J-9727-A Oil Seal Installer 53/71/92 Crankshaft
J-9769 Crankshaft Oil Seal Expander 53 Crankshaft
J-03087-A Holding Plate 71/92 Cylinder Head
J-1928-C Stud Wrench 71 Cylinder Head
J-22062-A Cylinder Head Lifting Fixture 53/71/92 Cylinder Head
J-23741-B Head Holding Fixture NA Cylinder Head
J-24232 Head Puller 149 Cylinder Head
J-24748 Guide Stud Set 92 Cylinder Head
J-25384 Cylinder Block Tap 92 Cylinder Head
J-28454 Cylinder Head Test Fixture 71/92 Cylinder Head
J-28511-C Locating Pins 149 Cylinder Head
J-9665 Guide Stud Set 53/71 Cylinder Head
J-01927-A Alignment Studs 71/92 Flywheel

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-08968-A Drive Gear Installer 53 Gear Train\Engine Timing
J-23068 Alignment Tool Set 53/71/92 Gear Train\Engine Timing
J-24730 Tach Shaft Puller 53/71/92 Gear Train\Engine Timing
J-29893 Generator Gear Dial Indicator 71/92 Gear Train\Engine Timing
J-7557 Crankshaft Time Gear Installer 53 Gear Train\Engine Timing
J-22342-D Injector Tube Reconditioning Tool Set 149 Injector
J22396-A Injector Vise 53/71/92/149 Injector
J-22515-B Injector Tube Reconditioning Set 53/71/92 Injector
J-22525-B Injetoer Tube Reconditioning Set 53/71/92 Injector
J-24517-B Injector Tube Reconditioning Set 149 Injector
J-34760-A Pop N Fix 53/71/92 Injector
J-9783 Oil Seal Installer 53/71/92 Oil
J-9790 Oil Seal Installer 53 Oil
J-9791 Oil Seal Installer 71/92 Oil
J-1736 Valve Seat Insert Intaller 71 Valve
J-21520 Valve Guide Installer 71/92 Valve
J-22082-A Valve Guide Installer 149 Valve
J-22090-A Lap Block Set 53/71/92/149 Valve
J-22512-A Valve Seat Insert Remover 149 Valve
J-22711-A Valve Seat Installer 149 Valve
J-23458-B Valve Stem Guide Remover 149 Valve
J-23479-E Valve Seat Insert Remover Set 53/71/92 Valve
J-24357 Valve Seat Installer 92 Valve
J-24519 Valve Guide Installer 53 Valve
J-24566 Valve Seat Grinder Adapter Kit 92 Valve
J-25076-B Spring Checker 53/71/92 Valve
J-26541 Valve Seat Cutting Set 53/71/92 Valve
J-267-A Valve Stem Guide Driver 71 Valve
J-28612 Valve Guide Seal Installer 53/71/92 Valve
J-29197 Seal Ring Protector 53/71/92 Valve
J-35373 Valve Guide Installer 149 Valve
J-39880-A Valve Seat Installer 149 Valve
J-41282 Seal Installer NA Valve

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-4627-02 Valve Seat Grinder Adapter Kit 149 Valve
J-5437 Valve Guide Cleaner 53/71/92 Valve
J-5585 Valve Guide Cleaner 149 Valve
J-6568 Valve Seat Insert Intaller 71 Valve
J-6569-A Valve Guide Remover 53/71/92 Valve
J-6846 Bridge Guide Remover 71 Valve
J-7091-01 Valve Bridge Guide Remover 71/92/149 Valve
J-7453 Broken Bridge Guide Remover 71/92/149 Valve
J-7455-A Valve Spring Compressor 53/71/92 Valve
J-7482 Valve Bridge Guide Installer 71/92 Valve
J-7790 Valve Seal Insert Installer 53 Valve
J-7775-A Valve Guide Remover 53 Valve
J-7793 Valve Guide Cleaner 53 Valve
J-9530 Valve Guide Installer 71 Valve
J-29003-A B Size Radiator Adapter 53/71/92/149 Radiator
J-22143 Water Pump Impeller Remover 71 Water Pump
J-24857-A Water Nozzle Installer 92 Water Pump
J-33765 Pump Wrench Adapter 71/92 Water Pump
J-39944 Coolant Flow Checker 149 Water Pump
J-22582 Engine Barring Tool 71/92/149 Block
J-24051-B Presure Test Kit 149 Block
J-24233-A Water Hole Tube Installer 149 Block
J-1903 Cam Gear Replacer 71/92 Camshaft
J-28462 Torque Wrench Adapter 149 Camshaft
J-33421-A Cam Follower Service Tool 53/71/92 Camshaft
J-6202-01 Cam Remover Adpt. Plate 71/92 Camshaft
J-7593-03 Cam Bushing remover and Installer 53 Camshaft
J-1902-B Cam Gear Puller 50/50G/60 Camshaft
J-2112-B Installer 71/92 Crankshaft
J-21277 Crank Rr. O.S. Installer 53 Crankshaft
J-22767 Installer Set 149 Crankshaft
J-22897 Torque Wrench Adapter Set 149 Crankshaft
J-22898-A Torque Wrench Adapter Set 71/92 Crankshaft

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-25002 Seal Stud Set 92 Crankshaft
J-34728 Crankshaft Cup Plug Tester 149 Crankshaft
J-34930-A Crank Pos. Timing Tool 92 Crankshaft
J-08386-A Master Ring Gauge 71/92 Block
J-24583-A Cylinder Liner remover 71/92 Block
J-1918-02 Liner Remover (Slide Hammer) 71 Block
J-21793-B Cylinder Liner Clamp 53/71 Block
J-21799 Block Alignment Tool 16v 71/92 Block
J-22486 Cylinder Block Alignment Set 149 Block
J-22490 Liner Remover (Slide Hammer) 53 Block
J-22641-A Cylinder Liner Installer 149 Block
J23019 Cylinder Block Plug Remover and Installer 71/92/149 Block
J-24533-A Block Torque Adapter 149 Block
J-24542 Cylinder Block Alignment Tool 149 Block
J-24564 Master Ring Gauge 92 Block
J-24898 Liner Depth Gauge 92 Block
J-25275 Installer and Remover 71/92 Block
J-25451-B Block Assembly Wrench Set 92 Block
J-26244 Hole Gauge 71/92 Block
J-26816-A Exhaust Man Nut Wrench 149 Block
J-28651 Block Assembly Wrench 71 Block
J-29005 Line Boring Complete Kit (Main) 71/92 Block
J-29513 Thread Repair Kit 92 Block
J-3092-01 Push Rod Remover Set 53/71/92 Block
J-33850 Engine Adapter Kit 53/71/92 Block
J-34650 Pipe Plug Driver 71/92/149 Block
J-34698 Cylinder Bore Plug Set 71 Block
J-34699 Cylinder Bore Plug Set 92 Block
J-35572 Installer 53 Block
J-36571 Surface Conditioning Set 53/71/92/149 Block
J-38359 Thread Repair Kit 149 Block
J-38895 Spacer Installer 149 Block
J-41749 Ledge Resurfacer 149 Block

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-5347-B Gauge Dial Bore 53/71/92/149 Block
J-8650 Engine Mounting Plate 71/92 Block
J-25026-A Flywheel Lifting Fixture 53/71/92/149 Flywheel
J-6361-01 Flywheel Lifting Hook 53/71 Flywheel
J-7540 Alignment Studs 53 Flywheel
J-9737-D Flywheel Checking Gauge 30/40/53/71/92/149 Flywheel
J-7632 Con Rod Holder 53/71 Piston and Con Rod
J-24107-A Piston Pin Ret. Installer 71 Piston and Con Rod
J-36211 Holding Fixture 53/71/92/149 Piston and Con Rod
J-8932-B Fuel Line Nut Wrench 53/71 Piston and Con Rod
J-22387-A Piston Ring Compressor 149 Piston and Con Rod
J-23453 Seal Ring Compressor 53/71/92/149 Piston and Con Rod
J-23987-B Piston Pin Retainer Leak Detector 53/71/92/ Piston and Con Rod
J-24227-B Piston Ring Compressor 92 Piston and Con Rod
J-24274-B Piston Pin Ret. Installer 149 Piston and Con Rod
J-24285 Piston Pin Align Tool 71 Piston and Con Rod
J-24421 Seal Ring Compressor 149 Piston and Con Rod
J-24599-A Keystone Piston Groove Gauge 71/92 Piston and Con Rod
J-24629 149 Adapter Cup 149 Piston and Con Rod
J-25397-B Piston Crown ID Gauge 71/92/149 Piston and Con Rod
J-3071-B Pin Bushing reamer Kit (Trnk Type) 71 Piston and Con Rod
J-3272-D Piston Ring Compressor 71 Piston and Con Rod
J-35619 Piston Pin Align Tool 53 Piston and Con Rod
J-38088 Installer 92 Piston and Con Rod
J-38390 Piston Pin Align Tool 92 Piston and Con Rod
J-41733 Piston Crown ID Gauge 92 Piston and Con Rod
J-41971 Piston I.D. Gauge 71 Piston and Con Rod
J-4970-02 Pin Bushing Reamer 53 Piston and Con Rod
J-6883-B Piston Ring Compressor 53 Piston and Con Rod
J-8128 Piston Ring Assembly Tool 53/71/92 Piston and Con Rod
J-21779 Lever Position Pin 71/92 Valve Lash
J-6692-B Compression Gauge 53/71/92/149 Comm Testing
J-7915-E Cylinder Comp. Gauge Adpt. 53/71/92 Comm Testing

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-22506-B Diagnosis Test Kit 53/71/92 Diagnostics
J-38477-A Marine Diagnostic Kit 53/71/92/149 Diagnostics
J-8397 Water Vac. Gauge 53/71/92/149 Diagnostics
J-9531-C Diagnosis Test Kit 52/71/92 Diagnostics
J-34680-A Diagnostic Tes Kit 149 Diagnostics
J-25558 Pin Gauge 53/71/92 Engine Timming
J-29021 Manometer 53/71/92/149 Engine Timming
J-33889-A Belt Tension Gauge 149 Engine Timming
J-34615-A Tune Up Kit 149 Engine Timming
J-39762 Timing Gauge 2.590 149 Engine Timming
J-04873-A Govenor Speed Spring Wrench 71/92 Engine Timming
J-1242 Injector Timing Gauge 1.484 53/71/92 Fuel Injector
J-1853 Inlector Timing Gauge 1.460 53/71/92 Fuel Injector
J-22412-A Injector Timing Gauge 2.175 149 Fuel Injector
J-23190 Injector Rack Gauge (.454) 53/71/92/149 Fuel Injector
J-24236 Injector Timing Gauge 1.470 53/71/92 Fuel Injector
J-24283-A Injector Timing Gauge 2.205 149 Fuel Injector
J-24872 Injector Rack Gauge (.520) 92 Fuel Injector
J-24882 Injector Rack Gauge (.385) 71/92 Fuel Injector
J-24889 Injector Rack Gauge (.345) 71 Fuel Injector
J-25454 Injector Timing Gauge 1.500 53/71/92 Fuel Injector
J-25502 Injector Timing Gauge 71/92 Fuel Injector
J-25559 Injector Rack Gauge (.570) 53/71/92 Fuel Injector
J25560 Injector Rack Gauge (.636) 92 Fuel Injector
J-26645 Injector Rack Gauge (.160) 149 Fuel Injector
J-26646 Injector Rack Gauge (.290) 53/149 Fuel Injector
J-26888 Injection Timing Gauge 1.466 71/92 Fuel Injector
J-26927 Injector Rack Gauge (.586/.686) 71 Fuel Injector
J-28779 Injector Rack Gauge (.365) 53/149 Fuel Injector
J-29062 Injector Rack Gauge (.504) 92 Fuel Injector
J-29063 Injector Rack Gauge (.594) 71/92 Fuel Injector
J-29064 Injector Rack Gauge (.660) 92 Fuel Injector
J-29065 Injector Timing Gauge 1.480 71/92 Fuel Injector

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-29116-A Injector Timing Gauge 2.185 149 Fuel Injector
J-29825 Injector Rack Gauge (.220) 149 Fuel Injector
J-33156 Injector Rack Gauge (.465) 92 Fuel Injector
J-33157 Injector Rack Gauge (.490) 92 Fuel Injector
J-34079 Injector Rack Gauge (.610) 92 Fuel Injector
J-34080 Injector Rack Gauge (.480) 71/92 Fuel Injector
J-34081 Injector Timing Gauge 1.464 92 Fuel Injector
J-34192 Injector Timing Gauge 1.515 92 Fuel Injector
J-34609 Injector Rack Gauge (.550) 71 Fuel Injector
J-34610 Injector Timing Gauge 1.458 71 Fuel Injector
J-34921 Injector Timing Gauge 1.475 71 Fuel Injector
J-35586 Injector Rack Gauge (.200) 53 Fuel Injector
J-35735 Injector Rack Gauge (.430) 71/92 Fuel Injector
J-36869 Injector Timing Gauge 2.170 149 Fuel Injector
J-38349 Injector Timing Gauge 64.1mm 149 Fuel Injector
J-8909 Injector Timing Gauge 1.508 53/71 Fuel Injector
J-9509-C Throttle Delay Mech. Gauge 53/92 Fuel Injector
J-9595 Injector Timing Gauge 1.496 53/71 Fuel Injector
J-9708-C Valve Lash Feeler Gauge Set 53/71/92/149 Fuel Injector
J-21304 Hyd. Gov. Link Gauge 71/92 Fuel Injector
J-21780 Lever Adjusting Tool 71/92 Governor
J-22195 Electronic Governor Link Gauge 71 Governor
J-23185 0.0015 Feeler Gauge 53/71/92/149 Governor
J-23478 Gov. Gap Gauge .200 71 Governor
J-28598-B Governor Adj. Tool 71/92 Governor
J-34184 Governor Link Dial Indicator 149 Governor
J-35516 Gov.Weight Wedge 71/92 Governor
J-5345-E Governor Setting Kit 53/71/92 Governor
J-5407 Gauge 53/71/92 Governor
J-5895 Gov. Spring Ret Nut Wrench 53/71 Governor
J-1241-07 Inj Service Set 53/71/92 Fuel Injector
J-21772 Bridge Adj. Tool 71/92/149 Fuel Injector
J-24790-D Tune Up Kit 53/71/92/149 Fuel Injector

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-28479 Fuel Modulator Gauge 53 Fuel Injector
J-29066 Timing Gauge 2.590 53/71/92 Fuel Injector
J-21100-E Push Rod Adjusting Wrench Set 53/71/92 Timing
J-22503-C Gauge Adapter Set 149 Timing
J-33095 Terminal Pick 71/92/149 Electronic Engine Control
J-34182 Pin Crimper 71/92/149 Electronic Engine Control
J34520-A Volt\Ohm Meter 53/71/92/149 Electronic Engine Control
J-34812-1 12 Pin Adapter 71/92 Electronic Engine Control
J-35123 Crimping Tool 71/92/149 Electronic Engine Control
J-35634 ECM Break Out Box 71/92/149 Electronic Engine Control
J-35634 Terminal Crimper 71/92/149 Electronic Engine Control
J-35751 Jumper Wire Set 71/92/149 Electronic Engine Control
J-35888-60A DDEC Repair Kit NA Electronic Engine Control
J-37164-B DDEC Sensor Tester 53/71/92/149 Electronic Engine Control
J-38125-6 Crimper (Term 1-5) 71/92/149 Electronic Engine Control
J-38384 Connector Remover 71/91/149 Electronic Engine Control
J-38582-3 Deutsch Pin Remover (Yellow) 71/92 Electronic Engine Control
J-38596-A ECM Test Harness 71/92/149 Electronic Engine Control
J-38640-B DDEC II Vehicle Interface Module 71/92149 Electronic Engine Control
J-39815 TRS Aignment Tool NA Electronic Engine Control
J-39848 Crimper, Terminal, Metric Pac 280 71/92 Electronic Engine Control
J-41005-A DDEC Vehicle Interface Module 71/92/149 Electronic Engine Control
J-36325 EEC Variable Speed Control 53/71/92/149 Electronic Engine Control
J-37050-A DDEC Injector Tester 71/92 Electronic Engine Control
J-35888-A DDEC Repair Kit 71/92/149 Electronic Engine Control
J-35889-A Prom Remover 71/92/149 Electronic Engine Control
J-25600-B Injector Spray Tip and P/B Flow Gauge 53/71/92/149 Fuel Injector
J-21545 Line Nut Wrench 149 Fuel Line
J-39108 Fuel Line Nut Wrench 149 Fuel Line
J-26617-A Fuel Line Wrench Set 149 Fuel Line
J-41787 Torque Wrench Adapter 149 Fuel Line
J-21967-A Bearing Remover 71/92/149 Governor
J-1508-E Fuel Pump Service Set 149 Fuel Pump

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-33853 Needle Bearing Remover 149 Fuel Pump
J-33854 Needle Bearing Installer 149 Fuel Pump
J-34158 Oil Seal Installer 149 Fuel Pump
J-34607-A Fuel Pump Tool Kit 149 Fuel Pump
J-4242 Wrench, Fuel and Water Pump 71/92/149 Fuel Pump
J-6355 Fuel Pressure Check Gauge 149 Fuel Pump
J-8151 Fuel Pressure Gauge 53/71/92/149 Fuel Pump
J-23176 Plug Remover and Installer 149 Governor
J-21068 Governor Cover Bearing Installer 149 Governor
J-4685 Sleeve Remover 71/149 Governor
J-21089 Inj.Body Reamer 53/71/92 Fuel Injector
J-22096-02 Inj. Nut Carbon Remover Set 149 Fuel Injector
J-22640-A Injector Tip Tester 53/71/92/149 Fuel Injector
J-22690 Reconditioning Set 53/71/92 Fuel Injector
J-22800-A Carbon Remover 149 Fuel Injector
J-22885 Spray Hole Wire .009 149 Fuel Injector
J-22964 Polishig Sticks 53/71/92 Fuel Injector
J-23038 Polishing Compound 53/71/92/149 Fuel Injector
J-23435-C Injector Service Set 53/71/92 Fuel Injector
J-23905 Concentricity Gauge 149 Fuel Injector
J-29079 Nozzle Adapter Kit 53/71/92 Fuel Injector
J-29584 Concentricity Gauge and Rack 53/71/92 Fuel Injector
J-34998 Calibration Kit 149 Fuel Injector
J-35369 Master Injector Kit 53/71/92 Fuel Injector
J-9462-02 Needle Valve Travel Gauge 53/71/92/149 Fuel Injector
J-1698-02 Blower Feeler Gauge Set 53/71/92/149 Charge Air Cooler
J-21672 Blower Tool Set 53 Charge Air Cooler
J-21834-A Clamp Set 71 Charge Air Cooler
J-22706-C Blower Service Set 149 Charge Air Cooler
J-23641 Drive Gear Hub Sockets 149 Charge Air Cooler
J-23679-A Sevice Tool Set (Except 8v-53) 53 Marine/Military Charge Air Cooler
J-33001 Blower Shaft Align Tool 71/92 Charge Air Cooler
J-35787-A Oil Seal\Wear Sleeve Installer 71/92 Charge Air Cooler

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.
 Two-Cycle Special Tool List

Tool Number Tool Discription Engine Application

J-38707-A Installer 149 Charge Air Cooler
J-4254 Rotor Remover and Installer 71 Charge Air Cooler
J-5209 Blower Drive Cam. Installer 53 Charge Air Cooler
J-8147 Blower Service Tool Set 71 Charge Air Cooler
J-26554-A Turbo Protector Shield 53/71/92/149 Turbo
J-28507 Snap Ring Pliers 53/71/92/149 Turbo
J-29086 Support Fixture 53/71/92/149 Turbo
J-29087 Drill Fixture 53/71/92/149 Turbo
J-29088 Groove Pin Installer 53/71/92/149 Turbo
J-29089-A Turbo Shaft Check 53/71/92/149 Turbo
J-29090 Plug\Sleeve Thrust Spacer 53/71/92/149 Turbo
J-29091 Sled Gauge 53/71/92/149 Turbo
J-29104 Seal Ring Installer 53/71/92/149 Turbo
J-29105 Seal Ring Installer 53/71/92/149 Turbo
J-29149 Turbocharger Tool Kit 53/71/92/149 Turbo
J-24783 Oil Filter Wrench 53/71/92/149 Oil Filter
J-29925 Filter Cutter (Fuel and Lube) 53/71/92/149 Oil Filter
J-23126 Torque Adapter 53 Oil Pump
J-9353 Cylinder Gauge Set 71/92 Oil Pump
J-36309 Hub Remover 53/71/92/149 Air Compressor
J-36311 Hub Installer 53/71/92/149 Air Compressor
J-6714-D Accumulator Charging Assembly NA Air Compressor
J-41732 Pulley Holder Assembly 92 Battery Charging

Inquiries should be sent to The user is advised to check the UNCONTROLLED COPY
regionalcenter3@mtu-online.com MTU Business Portal for the Latest Information. 12/2/2009
©1999-2009 MTU Detroit Diesel, Inc. All rights Reserved.