Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 126 views

    MVLC-Hand-Tool-02: Tool and Product Nomenclature Safety Instructions Warning

    Uploaded by

    Edgardo Ariel Rodriguez
    1. The document provides safety instructions and nomenclature for installing MVLC electrical power system accessories using the MVLC-Hand-Tool-02. 2. The installation instructions are a two-part process where the MVLC is first prepared by sliding the arrow and creepage extender underneath the brass zipper. 3. The prepared MVLC is then wrapped around the conductor using the hand tool, sliding the MVLC towards the tool until installation is complete. Proper positioning of the tool and creeping extender is emphasized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MVLC-Hand-Tool-02: Tool and Product Nomenclature Safety Instructions Warning

    Uploaded by

    Edgardo Ariel Rodriguez
    126 views6 pages
    1. The document provides safety instructions and nomenclature for installing MVLC electrical power system accessories using the MVLC-Hand-Tool-02. 2. The installation instructions are a two-part process where the MVLC is first prepared by sliding the arrow and creepage extender underneath the brass zipper. 3. The prepared MVLC is then wrapped around the conductor using the hand tool, sliding the MVLC towards the tool until installation is complete. Proper positioning of the tool and creeping extender is emphasized.

    Original Title

    mvlchandtool18-38

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides safety instructions and nomenclature for installing MVLC electrical power system accessories using the MVLC-Hand-Tool-02. 2. The installation instructions are a two-part process where the MVLC is first prepared by sliding the arrow and creepage extender underneath the brass zipper. 3. The prepared MVLC is then wrapped around the conductor using the hand tool, sliding the MVLC towards the tool until installation is complete. Proper positioning of the tool and creeping extender is emphasized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    126 views6 pages

    MVLC-Hand-Tool-02: Tool and Product Nomenclature Safety Instructions Warning

    Uploaded by

    Edgardo Ariel Rodriguez
    1. The document provides safety instructions and nomenclature for installing MVLC electrical power system accessories using the MVLC-Hand-Tool-02. 2. The installation instructions are a two-part process where the MVLC is first prepared by sliding the arrow and creepage extender underneath the brass zipper. 3. The prepared MVLC is then wrapped around the conductor using the hand tool, sliding the MVLC towards the tool until installation is complete. Proper positioning of the tool and creeping extender is emphasized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    MVLC-Hand-Tool-02

    Installation of MVLC-18 and MVLC-38 using MVLC-Hand-Tool-02

    Safety Instructions Tool and Product Nomenclature


    Warning: When installing electrical power system accessories,
    failure to follow applicable personal safety requirements and written
    installation instructions could result in fire or explosion and serious or Open, flat MVLC (As supplied)
    fatal injuries.

    Danger! The MVLC installation must be made in accordance with


    company approved safe work practices when working with an
    energized conductor. Failure to do so can result in serious injury or
    death. Receptacle

    Personal protective equipment must be utilized at all times during


    MVLC installations.
    _18
    As Tyco Electronics has no control over field conditions which Arrow
    Creepage
    influence product installation, it is understood that the user must extender
    take this into account and apply his own experience and expertise
    when installing product.

    Outfeed
    side

    Brass Receptacle
    zipper infeed
    Arrow
    infeed

    _16

    1
    PCN 476676-000
    PII 55125, Rev AB Effective Date: July 7, 2004
    Installation Instructions

    Part One: Perform Prior to Installation on Conductor

    1. Place a 6-12"(150-300mm) length of MVLC in your right Receptacle


    hand and the MVLC hand tool in your left hand. Creepage extender
    and arrow

    2. Make sure that the arrow and creepage extender are


    on the near side and the receptacle is on the far side.

    3. Use your right hand as a funnel to initiate the _9

    wrapping/closing of the product.

    4. While keeping the creepage extender above the brass


    zipper, slide the arrow and receptacle into their respective
    compartments underneath the brass zipper.

    _17

    Part Two: To Install MVLC on Conductor

    1. To install MVLC on conductor, place the hand tool under


    the conductor.

    2. Wrap the MVLC around the conductor such that the arrow
    and creepage extender are on the near side.

    3. Place the creepage extender under the conductor.


    Creepage extender
    and arrow

    Outfeed
    side

    _6

    2
    PCN 476676-000
    PII 55125, Rev AB Effective Date: July 7, 2004
    4. Continue sliding the MVLC towards the hand tool, ensuring
    that the creepage extender stays below the conductor, but
    slides on top of the brass zipper. Slide the arrow and
    receptacle into their respective compartments under the brass
    zipper.

    _5

    5. Continue pushing the product to the left and the hand tool
    to the right until the MVLC installation is complete.
    MVLC product

    Hand tool

    _4

    For Vertical Installations of MVLC on Conductor Leads:

    1. Measure the length of the conductor,"x", excluding the


    lugs. Cut the required length of MVLC.

    "X"

    fig6

    3
    PCN 476676-000
    PII 55125, Rev AB Effective Date: July 7, 2004
    2. Place the hand tool in your left hand such that the rollers
    and handle slide against the contour of the conductor and are
    approximately halfway up the conductor.

    Standing on _11
    this side
    of the _21
    conductor.

    Correct Tool Positioning Incorrect Tool Positioning


    (with contour of conductor) (against contour of conductor)

    3. Place the MVLC product in your right hand, ensuring that


    the arrow and creepage extender are on the near side. Wrap
    the MVLC product around the conductor such that the
    creepage extender is below the conductor, but on top of the
    brass zipper. While holding the tool in your left hand, slide the
    arrow and receptacle into their respective compartments.

    Creepage extender
    and arrow

    Outfeed
    side

    _6

    4
    PCN 476676-000
    PII 55125, Rev AB Effective Date: July 7, 2004
    4. While holding the tool steady, continue pushing the MVLC
    product toward the top lug.

    Slide
    product

    fig9

    5. When the MVLC reaches the top lug, grip the closed MVLC
    with your left hand and use your right hand to pull the tool
    towards the bottom lug.

    Tool

    fig9a

    5
    PCN 476676-000
    PII 55125, Rev AB Effective Date: July 7, 2004
    6. MVLC installation is complete.

    fig11

    7. Continue installation by placing a BCIC cover on the


    bushing.

    _14 _15

    6 PCN 476676-000
    DCR C59570
    PII 55125, Rev AB Effective Date: July 7, 2004

    You might also like