DOUBLE-LOCK

STRUCTURAL PANELS

DIMENSIONAL METALS, INC.

STRIATED PANEL PROFILE

(STANDARD) 1.5”

WIDTH VARIES BY SUBSTRATE

(SEE BELOW)
DOUBLE-LOCK K is a structural panel which is mech
mechanically seamed during installation. The panel is an integral interlocking system by design which installs in one
direction from a given starting point. A double male* starter panel is available (for a minimal set-up fee) and may be installed in the middle of a roof area to achieve
a symmetrical layout. DOUBLE-LOCK utilizes the traditional SMACNA standing seam "double-lock" plate. Two different clips are available: Low Floating and Fixed.

ROOF ASSEMBLIES
DOUBLE-LOCK can be applied over various roof substrates including: open framing, rigid insulation (utilizing a bearing plate under each panel clip 30” o.c., max.)
over 22 ga. steel deck, and various solid substrates including plywood sheathing and nail base insulation.

PRODUCT USES AND APPLICATIONS

Product uses include low to high slope roofing, vertical fascia, equipment screens, mansards, and wall panels. This system may also be installed on tapered and
curved roof areas.

PRODUCT OFFERINGS
24 ga. Steel, and .032 Aluminum Factory Applied
with o.c. seams Non- Curing
with o.c. seams Sealant
with 20" o.c. seams
16, 20 oz. Copper
with o.c. seams
with 20" o.c. seams
24 ga (.7mm) RHEINZINK ®
with o.c. seams PANEL CLIP
FASTENER
PERFORMANCE TESTED

SEAM CROSS SECTION DL15 EXPANSION CLIP

OPTIONAL SEAM PROFILE CROSS SECTIONS

DOUBLE-LOCK ADVANTAGES
Factory Applied Non-Curing Sealant: superior watertightness
SMACNA Seam Design: a traditional and historical aesthetic appearance
Mechanically Seamed: may be installed on low slope applications down to 1/2:12 slope
Expansion Clips: allows for thermal expansion and contraction
Continuous Rollformed Lengths : eliminates need for panel lap joints
Total System arranties Available: For total confidence
SINGLE-LOCK SINGLE-LOCK BATTEN
*Note: Metallic paint finishes are “directional” and are not recommended for “double male” panels.

For technical assistance call 800.828.1510 or visit our website at www.dmimetals.com

 DL15 SUBMITTAL DIMENSIONAL METALS, INC.

PROJECT NAME:
ARCHITECT:
INSTALLING CONTRACTOR:
GENERAL CONTRACTOR:
SPECIFICATION SECTION:
PANEL WIDTH CLIPS
12” 17” 20” 15.7“ (RHEINZINK ®
) ____ Custom Width EXPANSION FIXED

PROFILE
STRIATIONS
(STANDARD)

SMOOTH

2 HIGH BEAD

2 LOW BEAD

DynaClad ® STOCKED AT DMI SUBSTRATE

Standard Colors 24 GAGE 22 GAGE .032 ALUM. .040 ALUM. .050 ALUM. .063 ALUM. 24 GA. GALVALUME 16 OZ. COPPER
GALVALUME GALVALUME 3105 H14 3105 H14 3105 H14 3105 H14
(IN ALPHABETICAL ORDER)
.032 ALUMINUM 20 OZ. COPPER
AGED COPPER* 24 GA. (.7MM) RHEINZINK®
BEIGE
BRITE RED*
BROWN EMBOSSED
BURGUNDY YES
CHAMPAGNE* NO
CHARCOAL GREY Consult DMI for minimum quantities, upcharges, set up fees and extended lead times
CLASSIC BRONZE
COBALT BLUE STANDARD FINISHES (NA ON COPPER)
COLONIAL RED ®

DARK BRONZE
DYNACLAD PVDF:
®

DOVE GREY ACRYLIC COATED GALVALUME (ACRYLUME )

EVERGREEN MILL FINISH ALUMINUM
HARTFORD GREEN CLEAR ANODIZED ALUMINUM
HEMLOCK GREEN PRE PATINA BLUE-GREY (RHEINZINK ONLY)
®

LEAF GREEN PREPATINA GRAPHITE-GREY (RHEINZINK ® ONLY)

MATTE BLACK
METALLIC COPPER* PREMIUM FINISHES*
®
METALLIC SILVER* DYNACLAD METALLIC PVDF:
MUSKET GREY DYNACLAD BRITE RED PVDF
®

®
PATINA COPPER DYNACLAD STANDARD COLOR PVDF W/CLEARCOAT (3-COAT):
PUTTY ®
DYNACLAD METALLIC COLOR PVDF W/CLEARCOAT (3-COAT):
ROYAL BLUE
CUSTOM COLOR:
SANDSTONE
*Premium Colors subject to minimum quantities, extended lead times and upcharges. Consult DMI for details.
SEAPORT
SLATE BLUE
SLATE GREY
SPARTAN BRONZE WARRANTY
®
STONE DYNACLAD PAINT FINISH
TERRA COTTA GALVALUME 20 YEAR - 6 MONTH (SUBSTRATE)
WEATHERED ZINC* WATERTIGHTNESS
WHITE ®
DYNACLAD METAL ROOFING SYSTEM
MILL FINISHED ALUM. ®
DYNACLAD METAL ROOFING SYSTEM NDL
ACRYLUME®
CLEAR ANODIZED *Warranties not available for Rhenzink

Non-Stock colors available subject to minimum quantities, additional lead times and upcharges.
* Denotes Premium Color - subject to additional costs.

Dimensional Metals, Inc. has specialized in the manufacturing of Architectural Metal Panel Systems and Fabricated Architectural Sheet Metal for the
construction industry since 1988. We use the most technologically advanced Fixed Base Roll-Forming Equipment to deliver complete in-
house quality control over the manufacture of our products.


PROVEN · DEPENDABLE · SUSTAINABLE
11172016
Metal Envelope Systems since 1988