SERIES 7800

End-of-Line Emergency Pressure Vent

PROTECTOSEAL

Sizes 2" (DN 50) through 24" (DN 600)

Settings achieved by weight loading
Reduces costly evaporation losses
Provides emergency relief in the event of external fire
Leakage rate of less than 1 SCFH of air at 90% of set point
Patented, FEP film Air-Cushioned Seating
Low-leak pallet design - certified test reports
Conforms to the latest ATEX Directive
Factory tested / certified for leakage and correct settings
Available in Aluminum, Stainless Steel, Carbon Steel,
and Alloy C / C276

OBJECTIVE PRO-FLOW Sizing and Selection Software.

The Protectoseal Series 7800, End-of-Line Emergency Use PRO-FLOW to select the correct size unit for
Pressure Vents are designed to provide emergency relief pressure and vacuum relief calculated in accordance with
capacity beyond that furnished by the operating vents on API 2000, ISO 28300, NFPA 30 and OSHA 1910.106.
tanks, low pressure vessels and piping in the event of external
fire involvement. Vapors are relieved to atmosphere. CONSTRUCTION
A comprehensive range of materials is offered as shown in
TECHNIQUE the chart below. Non-metallic (thermoplastic resin & FRP),
Under normal operating conditions, the pallet assembly is construction available. Other materials and features can be
closed providing a vapor-tight seal. In the event of an furnished upon request.
emergency (fire involvement of the tank) the pallet lifts to vent Available Options.
excess vapors thereby protecting the tank from dangerous Alternate diaphragm materials
over-pressurization. Pallet automatically closes and reseals Material certifications for castings
when the pressure is reduced. Lower than standard minimum pressure settings
Mechanical or electronic indication of vent opening
FEP coating
Optimized Performance Vents
Protectoseals Optimized Performance Vents incorporate Kynar coating (Kynar is a Registered Trademark of Arkema, Inc.)
patented features that provide the optimum overall vent per- Special cleaning & packaging for the storage of ultrapure
formance with regard to sealing, set point, flow and resealing liquids
(blow down).
Base Flange/ Weather- Pallet
SPECIAL FEATURES Series Size Seat Hood Pallet* Diaphragm
Fast Inspection, Easy Maintenance. Design and light weight
of entire unit permits easy, convenient handling for inspection 7800 12"-12" Aluminum Aluminum Aluminum FEP Film
and maintenance. Coarse mesh screen prevents entry of 7800 16"-24" Steel/316 S.S. Steel Aluminum FEP Film
foreign matter into seating area. C7800 12"-12" Steel/316 S.S. Steel 316 S.S. FEP Film
Maintains Accurate Pressure Settings. Set points are C7800 16"-24" Steel/316 S.S. Steel 316 S.S. FEP Film
accurate to within +/- 3% based on weight per area of mean E7800 12"-12" Aluminum Aluminum 316 S.S. FEP Film
seat diameter.
F7800 12"-12" 316 S.S. 316 S.S. 316 S.S. FEP Film
Air-Cushioned Seating. A flat, smooth diaphragm of FEP film F7800 16"-24" 316 S.S. 316 S.S. 316 S.S. FEP Film
is supported on both sides of an annular channel to form a
floating air seal with the seat. An outer support rim assures M7800 12"-12" Alloy C C276 C276 FEP Film
proper seating. M7800 16"-24" C276 C276 C276 FEP Film
* On steel and aluminum vents, weights are steel or lead. On stainless steel vents,
Low-Leakage. Vent leakage is no more than 1 SCFH at 90% weights are stainless steel or lead. On C276 vents, weights are C276 or lead.
of the set pressure.
2" through 12" Aluminum vents flanged to mate with 125# ANSI and DIN PN 16 flat
Sizes Available. 2" (DN 50) through 12" (DN 300) aluminum face flanges. Steel, stainless steel and C276 units flanged to mate with 150# ANSI
units flanged to mate with 125# ANSI and DIN PN 16 flat face and DIN PN 16 raised face flanges. 16" through 24" vents flanged to mate with
applicable ANSI or API flat face flange connections.
flanges. All other materials mate with 150# ANSI and DIN PN
16 raised face flanges. 16" (DN 400) through 24" (DN600)
units flanged to mate with applicable ANSI or API flat face
flange connections.

www.protectoseal.com
Specifications Series 7800
End-of-Line Emergency Pressure Vent

DIMENSIONS & ORDERING INFORMATION

Pipe Size Ht. Width B.C. Dia. Dia. Holes
Cat. No.* K A B C D E G N
Pressure
Relief FEP
Film
7802H 12" 81 4" 181 2" 113 4" 143 4" 15 8"-11 16" Stud
Air-Cush-
ioned Pallet 7802DNH DN50 210mm 216mm 119mm 125mm M16x2 165mm Stud
Seat
7803H 13" 101 4" 121 4" 121 8" 16" 113 4" 171 2" 14
7803DNH DN80 260mm 311mm 154mm 160mm 118mm 200mm 18
7804H 14" 109 16" 121 4" 123 8" 171 2" 113 4" 19" 18
7804DNH DN100 268mm 311mm 160mm 180mm 118mm 220mm 18
7806H 16" 131 8" 141 2" 1211 16" 191 2" 117 8" 11" 18
7806DNH DN150" 333mm 362mm 168mm 240mm 122mm 285mm 18
7808H 18" 151 4" 17" 133 8" 113 4" 117 8" 131 2" 18
7808DNH DN200 387mm 432mm 186mm 295mm 122mm 340mm 12
Dimensions shown are for reference only, 7810H 10" 165 8" 223 4" 121 4" 141 4" 11" 16" 12
contact Factory for certified drawings.
7810DNH DN250 422mm 578mm 157mm 355mm 126mm 405mm 12
7812H 12" 185 8" 251 8" 123 4" 17" 11" 19" 12
7812DNH DN300 473mm 638mm 170mm 410mm 126mm 460mm 12
7816ASA 16" 20" 263 4" 165 8" 211 4" 111 8" 231 2" 16
7816DN DN400 508mm 679mm 168mm 525mm 130mm 580mm 16
7820ASA 20" 20" 32" 165 8" 25" 111 4" 271 2" 20
7820API 20" 20" 32" 165 8" 231 2" 113 4" 26" 16
7820DN DN500 508mm 813mm 168mm 650mm 133mm 715mm 20
7824ASA 24" 21" 40" 165 8" 291 2" 113 8" 32" 20
7824API 24" 21" 40" 165 8" 271 2" 113 4" 30" 20
7824DN DN600 533mm 1016mm 168mm 770mm 133mm 840mm 20
* Cat. No. designates Aluminum Housing & Pallets, see chart on the reverse for other materials of construction.

PRESSURE AND/OR VACUUM SETTINGS (Consult factory for settings outside of STANDARD range.)
STANDARD MINIMUM SETTINGS STANDARD MAXIMUM SETTINGS
PRESSURE ONLY PRESSURE VACUUM
Aluminum Other Materials All Materials All Materials
Flange Size oz./in.2 in.W.C. kPa oz./in.2 in.W.C. kPa oz./in.2 in.W.C. kPa oz./in.2 in.W.C. kPa
12 / DN 50 1.00 1.73 0.43 1.00 1.73 0.43 48.00 83.04 20.68 N/A N/A N/A
13" / DN 80 1.00 1.73 0.43 1.00 1.73 0.43 48.00 83.04 20.68 N/A N/A N/A
14" / DN 100 1.00 1.73 0.43 1.00 1.73 0.43 48.00 83.04 20.68 N/A N/A N/A
16" / DN 150 1.00 1.73 0.43 1.00 1.73 0.43 48.00 83.04 20.68 N/A N/A N/A
18" / DN 200 1.00 1.73 0.43 1.00 1.73 0.43 48.00 83.04 20.68 N/A N/A N/A
10" / DN 250 1.00 1.73 0.43 1.00 1.73 0.43 48.00 83.04 20.68 N/A N/A N/A
12" / DN 300 1.00 1.73 0.43 1.00 1.73 0.43 48.00 83.04 20.68 N/A N/A N/A
16" / DN 400 1.00 1.73 0.43 1.00 1.73 0.43 11.90 20.59 15.13 N/A N/A N/A
18" / DN 450 1.00 1.73 0.43 1.00 1.73 0.43 11.90 20.59 15.13 N/A N/A N/A
20" / DN 500 1.00 1.73 0.43 1.00 1.73 0.43 18.00 13.84 13.45 N/A N/A N/A
24" / DN 600 1.00 1.73 0.43 1.00 1.73 0.43 11.00 19.03 14.74 N/A N/A N/A

PROTECTOSEAL
Safety Without Compromise

225 Foster Ave., Bensenville, IL 60106-1690
P 630.595.0800 F 630.595.8059
info@protectoseal.com www.protectoseal.com

2016 The Protectoseal Company V-7800/6