Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    Satelit Finder PDF

    Uploaded by

    uimarin14
    This document describes the Behzad Satellite Finder project, which allows users to build their own satellite signal finder for the C and Ku bands (950-2000MHz). It details the circuit design and components used, including transistors, diodes, and coils. The project page warns that the finder is provided for educational purposes only, without any warranty, and is intended to give users experience with high frequency systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Satelit Finder PDF

    Uploaded by

    uimarin14
    48 views3 pages
    This document describes the Behzad Satellite Finder project, which allows users to build their own satellite signal finder for the C and Ku bands (950-2000MHz). It details the circuit design and components used, including transistors, diodes, and coils. The project page warns that the finder is provided for educational purposes only, without any warranty, and is intended to give users experience with high frequency systems.

    Original Title

    satelit finder.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the Behzad Satellite Finder project, which allows users to build their own satellite signal finder for the C and Ku bands (950-2000MHz). It details the circuit design and components used, including transistors, diodes, and coils. The project page warns that the finder is provided for educational purposes only, without any warranty, and is intended to give users experience with high frequency systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views3 pages

    Satelit Finder PDF

    Uploaded by

    uimarin14
    This document describes the Behzad Satellite Finder project, which allows users to build their own satellite signal finder for the C and Ku bands (950-2000MHz). It details the circuit design and components used, including transistors, diodes, and coils. The project page warns that the finder is provided for educational purposes only, without any warranty, and is intended to give users experience with high frequency systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Behzad Satelite Finder (C & KU band 950-2000MHZ) . http://www.khazama.com/project/satfinder/default-en.

    aspx

         ‫ﺑﺮای ﻣﺸﺎﻫﺪه روﻧﺪ ﺳﺎﺧﺖ ﭘﺮوژه ﻫﺎ و ﻣﺤﺼﻮﻻت ﺑﻪ ﮐﺎﻧﺎل ﺗﻠﮕﺮام ﻣﺎ ﺑﭙﯿﻮﻧﺪﯾﺪ‬

    ‫ﺗﻤﺎس ﺑﺎ ﻣﺎ‬ ‫آﻣﻮزﺷﻬﺎ و ﻣﻘﺎﻻت‬ ‫وﺑﻼگ‬ ‫ﺑﺤﺚ و ﮔﻔﺘﮕﻮ‬ ‫ﭘﺮوژه ﻫﺎ‬ ‫داﻧﻠﻮد‬ ‫ﻣﺤﺼﻮﻻت‬ ‫ﺧﺎﻧﻪ‬

    Behzad Satellite Finder (950-2000MHZ).


    ‫ﻧﺴﺨﻪ ﻓﺎرﺳﯽ‬
    I had a DVB card since long time ago . some days ago I start to Install and test it . It was a very good experience. I was saw some small devices which called Satellite Finder and now I decide to build a Finder myself
    as a small and hobby project . I start to search within the internet to find some other project of other developers but as I found there was no any other open project on the internet. any things available was some
    thing for measuring output power of a high power transmitter (PA) or SWR meter, some projects that I had experience on it (here). even in too many forums too many people have sent some questions to find this
    project schematic but nobody got their answer correctly.

    1 of 3 7/21/20, 8:18 AM
    Behzad Satelite Finder (C & KU band 950-2000MHZ) . http://www.khazama.com/project/satfinder/default-en.aspx

    2 of 3 7/21/20, 8:18 AM
    Behzad Satelite Finder (C & KU band 950-2000MHZ) . http://www.khazama.com/project/satfinder/default-en.aspx

    In real and in commercial usage (and for better stability) it is too better to use a double side copper fiber glass PCB for any projects like this. one side completely for ground and other side for components, and this
    two sides have too many junction between ground of components side and full ground side . this can decrease skin effect and improve stability. the device can stops from working if component pins length be a little
    long, thus cut the components pins as much as possible and install those very close together. I've use a 2SC3355 Hi frequence NPN transistor in the first RF stage, this stage amplify the signal level of the LNB .
    after some researching on the web I've found some small chips (like mPC2708TB from NEC) with Hi gain and very Hi bandwidth which were very useful for this project but I couldn't found those chips here (IRAN).
    I've used two ultra fast schottky diode which you can replace it with any other diode which can work in 2GHZ or even you can simply use base-emitter of two other 2SC3355 as high frequence diode. the project has
    two R.F.C coil that you can build it yourself with turning 30 turn of 0.6mm colored wire over 4mm thickness cylinder.

    Building and using this project is without any warranty . The goal of building and releasing this project was only for educational purpose and for an experience on very very hi frequence systems
    .

    Designer And Programmer : Behzad khazama


    Coded With ASP.NET
    . ‫ﺗﻤﺎﻣﻲ ﺣﻘﻮق ﻣﺎدي و ﻣﻌﻨﻮي ﻣﻄﺎﻟﺐ ﻣﺘﻌﻠﻖ ﺑﻪ اﻳﻦ ﺳﺎﻳﺖ ﻣﻴﺒﺎﺷﺪ‬
    . ‫ﻫﺮ ﮔﻮﻧﻪ اﺳﺘﻔﺎده از ﻣﻄﺎﻟﺐ اﻳﻦ ﺳﺎﻳﺖ ﺗﻨﻬﺎ ﺑﺎ ذﮐﺮ ﻣﻨﺒﻊ ﺑﻼﻣﺎﻧﻊ ﻣﻴﺒﺎﺷﺪ‬
    www.khazama.com
    Tel : 051-44641597 - 09363677001 - 09155714862
    Support SMS Center: 09363677100

    3 of 3 7/21/20, 8:18 AM

    You might also like