Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Eqe MQC

Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 3

A 45 kg machine is place at the end of a 1.

6 m cantilever beam of elastic modulus


of 200x109 N/m2 and cross-sectional Moment of Inertia of 1.6X10-5m4. The machine
produces a harmonic force of magnitude 125 N. Find the stiffness of the system is.
A. (3-4) x 106 N/m
B. (2-3) x 106 N/m
C. (5-6) x 106 N/m
D. (4-5) x 106 N/m
Answers: B

Allowable value of magnification factor in order to restrict the steady-state


amplitude to 0.2 mm is.
A. 3-4
B. 1-2
C. 4-5
D. 5-6
Answers: A

Allowable ranges of frequencies for an undamped system are


A. 110-150 rad/sec
B. 190-300 rad/sec
C. 300-400 rad/sec
D. 400-500 rad/sec
Answers: B

A 45 kg machine is placed on four parallel springs of stiffness 2x105 N/m. when the
machine operates at 32 Hz, the machines steady state amplitude is measured as
1.5mm. What is the magnitude of excitation provided to the machine at this speed?
A. 1-2 kN
B. 4-5 N
C. 7-8 N
D. 4-5 kN
Answers: A

An SDOF system is subjected to sinusoidal force. At resonance, the displacement


amplitude is 70mm. At an exciting frequency of 1/5th of the natural frequency of
the system, the displacement amplitude was measured to be 10mm. The damping ratio
of the system is
A. 6-7 %
B. 7-8 %
C. 8-9%
D. 9-10%
Answers: A

A portal frame supports a machine that exerts a sinusoidal force of 8.5 kN at a


frequency of 1.75 Hz. The mass of the machine is 4000 kg and is added to that of
the frame. The mass of the frame at the floor level is 5000 kg and lateral
stiffness of the frameis 4x106 N/m. The applied force is
A. 8500
B. 8500 sin (1.75t)
C. 8500 cos (1.75t)
D. 8500 sin (11t)
Answers: D

Natural frequency of the system is


A. 3-4 Hz
B. 4-5 Hz
C. 5-6 Hz
D. 6-7 Hz
Answers: B
Forcing frequency is
A. 0.5-1
B. 1-1.5
C. 1.5-2
D. 2-2.5
Answers: A

Maximum static deflection of the system is


A. 2-3 mm
B. 3-4 mm
C. 4-5 mm
D. 5-6 mm
Answers: A

For 4% damping, the steady state amplitude of vibration is


A. 2-2.3 mm
B. 2.3-2.6 mm
C. 2.6-2.9 mm
D. 2.9-3.2 mm

Answers: D

At Resonance, the steady state amplitude of vibration is


A. 20-30mm
B. 30-50mm
C. 50-70mm
D. 70-90mm
Answers: A

A delicate instrument weighing 0.45kN is to be mounted on a rubber pad to the floor


of a test laboratory where the vertical acceleration is 0.1g at a frequency of 10
Hz. It has been determined experimentally that the ratio of the stiffness, k, to
the damping coefficient, c, is equal to 100 (1/sec) for the type of rubber pad
material used in the isolation. If the acceleration transmitted to the instrument
is 0.01g, for 10% damping. Frequency ratio is
A. 4-5
B. 5-6
C. 3-4
D. 6-7
Answers: C

Natural frequency of the system is


A. 90-105 rad/sec
B. 15-20 rad/sec
C. 105-120 rad/sec
D. 35-40 rad/sec
Answers: B

Stiffness of the system is


A. 13500-13700 N/m
B. 13250-13500 N/m
C. 13750-14000 N/m
D. 14000-14250 N/m
Answers: A

Damping of the system is


A. 180-200 N-s/m
B. 140-160 N-s/m
C. 160-180 N-s/m
D. 130-140 N-s/m
Answers: D

You might also like