Laying It

On The Line.
Cr itical d at a at a g l a n c e .

®
AEROQUIP
 SIZE (I.D.) •

PART NUMBER • ABRASION COVER •

& SUB BRAND

AEROQUIP GH781-6
®
9.5 mm (0.38 in) EXCEED
DN10 DURA-TUFF ISO 1875

Premium layline
Introducing a new look for our rubber hydraulic
PREMIUM

hoses. Our new intelligent laylines utilize a clean

bold simplified look that incorporates easy to read
icons and provides critical hose information at a
glance. Our premium hoses will have a colored
background distinguishing it from our standard
hose lines.
 SAE BEND • • CORE FITTINGS

• AGENCY SPECS WORKING • • TEMPERATURE • MATCHMATE

PRESSURE

DS SAE 100R16S / EN857 2SC PERFORMANCE -46°C to +126°C HALF 1A

52 • MSHA IC-84/19 • ABS • DNV-GL • USCG 400 BAR (5800 PSI) -50°F to +260°F BEND 2R
 SIZE (I.D.) •

PART NUMBER •

WINNER EC215-06 EN857 2SC • ISO

®
9.5 mm (0.38 in)
DN10 MSHA IC-84/41 •

Our new standard laylines will have

STANDARD

white and colored text but no colored

background. This will make it easy to
distinguish between our standard and
premium hoses.
 • AGENCY SPECS SAE BEND • • CORE FITTINGS

WORKING • • TEMPERATURE • MATCHMATE

PRESSURE

O 18752 -40°C to +100°C HALF 1A • Z

• DNV-GL • USCG 345 BAR (5000 PSI) -40°F to +212°F BEND 2R • 2pc
 Engineering is complex.
We made it easier.
Critical data at a glance.
Transportation, manufacturing, hose laylines to make hydraulic assembly
construction—these industries depend on more intuitive than ever. Whether you
innovative, expertly-engineered systems design systems that move, turn, mold,
to get important jobs done. Designing and lift, dig or haul, Eaton has the right hose
assembling these hard-working, complex for the job—and a simple way to identify
machines requires innovative thinking— it. Our new laylines are easier to read,
combined with the tools and proven present critical information in a consistent
®

parts to turn these ideas into durable, order and include helpful graphics and
dependable solutions. pictograms which allow users around the
AEROQUIP GH781-6

world to easily identify key performance

®

For decades, Eaton has earned a strong characteristics.

®

reputation for helping engineers, OEMs

WINNER EC215-06

and end users tackle their performance Additionally, all of our rubber hydraulic
®
AEROQUIP GH493-6

and uptime challenges by delivering hoses will use a single hose & fitting
rubber hydraulic hoses that provide system and unified support names for
WINNER EC415-0

superior quality—including longer service familiar performance features—like

life, improved flexibility, lighter weight and abrasion resistance and ultra-abrasion
enhanced durability. resistance. The Winner line of standard
hoses will also adopt this MatchMate
But Eaton also remains committed to fitting system to promote seamless
simplifying the complexities associated identification across all three hose lines.
with forward-thinking, industry- Together, these changes will create a
changing systems. Consistent system more cohesive portfolio of premium
performance starts with efficient design and standard rubber hoses that equips
and assembly. And both of these tasks engineers, OEMs and end users to
rely on identifying the right parts for meet the complex and growing needs of
every application—every time. That’s tomorrow’s machines.
why we refreshed our rubber hydraulic
9.5 mm (
DN

9
 DATA AT A GLANCE

Our laylines provide vital hose data instantly

When it comes to building the platforms and systems that drive the machines of the
future, complex engineering makes it all possible. In hydraulics, specific hose capabilities
and certifications must be tailored to the unique requirements of each application to
optimize performance, maximize uptime and protect user safety. Eaton’s new laylines
distill this complex engineering down into its essential parts for easy identification and
BRAND
simple assembly. Every key piece of information is located in one place, ensuring the
right hose—with the right capabilities for the job—is easy to identify every time.
PART NUMBER
Enhanced readability: Eaton’s new laylines take the guesswork out of system
SIZE (I.D.)
assembly. Each layline is easy to read, including important information about the hose—
such as the brand, part number, size, abrasion resistance, key specifications, pressure,
ABRASION COVER
temp and qualified fitting series.
SUB-BRAND

BRAND AGENCY SPECS

PART NUMBER PRESSURE

SIZE (I.D.) TEMP.

ABRASION COVER BEND

SUB-BRAND FITTING

AGENCY SPECS

PRESSURE

QUIP TEMP.
GH493-6 9.5 mm (0.38 in)
DN10 DURA-TUFF
EXCEEDS SAE 100R12 / EN856 TYPE R12
MSHA IC-84/19 • ABS • DNV-GL 448 BAR (6500 PSI) -40°C to +126°C
-40°F to +260°F
HALF
BEND 4S
BEND

FITTING
DEFINED SIMPLE TERMINOLOGY

Understanding layline terminology

Rugged covers, high temperatures,
low temperatures: get the right hose.

• ABRASION COVER
& SUB BRAND

AEROQUIP EC600-12 DURA-TUFF

®
19.0 mm (0.75 in) EXCEEDS SAE 100R15 • ISO 18752
DN19 X-FLEX MSHA IC-84/19 • ABS • DNV-GL • USCG

The new layline design also introduces straightforward terminology. Instantly

identify enhanced features like abrasion resistance and flexibility by
checking the sub-brand section of the layline.

Our high-temp hose can withstand

AQP HIGH-TEMP temperatures up to 302 (F) /150 (C)

Our low-temp hose can withstand

LOW-TEMP temperatures as low as -70 (F)

Premium abrasion-resistant hose cover;

8x greater than the ISO 6945 industry standard

Premium abrasion-resistant hose cover;

BRUISER 700x greater than the ISO 6945 industry standard
 AGENCY INFORMATION

Agency specifications: • AGENCY

Know which hose is up for the job. SPECIFICATIONS

Hose agency specifications are clearly defined on each hose. SAE, ISO, MSHA,
DNV-GL, USCG designation are displayed clearly on each hose, taking the guess
work out of hose qualifications.

AEROQUIP GH781-6 9.5 mm (0.38 in)

DN10
In addition, many of Eaton’s premium hydraulic hoses exceed SAE and EN
DURA-TUFF EXCEEDS SAE 100R16S / EN857 2SC
ISO 18752 • MSHA IC-84/19 • ABS • DNV-GL • USCG 400
specifications to offer superior performance. We will now consistently note this and
other specification-related terms on the layline as noted in the chart below.

Product performance compared

to SAE or EN requirements Product meets the SAE or Example as shown
Term (excluding dimensions) EN dimensional specification on layline
Exceeds at least one specification
Exceeds Yes Exceeds EN857 1SC
requirement and meets the others.
Exceeds at least one specification Exceeds EN857 1SC
Exceeds… Performance No
requirement and meets the others. Performance
Meets all but does not exceed any
n/a – no listed term Yes EN857 1SC
specification requirements
Meets all but does not exceed any EN857 1SC
Performance No
specification requirements Performance
n/a – industry standard does not exist for this
Type n/a 100R16 Type
size in a series

Symbols Definition Example

If the same term applies to both standards,

/ the term will be used in front of the leading Exceeds SAE 100R16 / EN 857 2SC
standard with this symbol
If different terms apply to the two standards,
• the standards will be Exceeds SAE 100R16 • EN 857 2SC Type
separated with this symbol
EASY TO READ ICONS

Global comprehension
Icons that simplify.

PRESSURE TEMPERATURE SAE BEND

The new layline design also introduces easy-to-identify icons and

pictograms, which allow more users around the world to intuitively identify
performance characteristics associated with each of Eaton’s rubber
hydraulic hoses. Icons include temperature, bend radius, pressure, correct
fitting type and more.
 STREAMLINED BEND INFORMATION

HALF
BEND
Engineered to perform at HALF
of the bend radius required by SAE.

1/3
BEND
Engineered to perform at ONE-THIRD
of the bend radius required by SAE.

SAE 100R2: 4”
1/2 BEND: 2”

1/3 BEND: 1.3”

*Hose bend measurements based on -04 hose size

SAE bend radius

Flexibility that works.

Each SAE hose standard specifies the minimum bend radius of a hose. This is defined as For the first time, our laylines will now indicate when a hose exceeds the SAE bend
the smallest diameter the hose can be bent without kinking. However, Eaton recognizes radius requirement. This improvement in bend means easier routing, better performance
that merely meeting a standard is often not good enough for the tight routing needs of and reduced hose length requirements.
your applications. Many of our core hoses have long been engineered to perform at half
or even one-third of the bend radius required by SAE.
FITTING INFORMATION SIMPLIFIED

Simplified compatibility.
Fittings that match.

As part of this layline refresh, all of Eaton’s rubber hydraulic hoses will now utilize the
simple, intuitive MatchMate hose & fitting system. For Aeroquip users, this system is
the exact same one they have used for years.

Spiral Braided

Matchmate:
1A on fitting
pairs with layline 1A
1AA8FR8 1AA8FR8
08Z-S68 08Z-S68
Spiral: 09820 Braided: 09820 Braided:
Number of rings on
4S

Number of rings Number of rings

fitting correspond to on fitting correspond on fitting correspond
4S or 6S icons on layline to ring icons on layline to ring icons on layline

4S
4-wire spiral
6S
6-wire spiral 1-wire braided 2-wire braided

4S -46°C to +126°C
-50°F to +260°F
HALF
BEND
1A -46°C to +126°C
-50°F to +260°F
HALF
BEND
1A

FITTING FITTING FITTING

 FITTING INFORMATION SIMPLIFIED

Fittings you can trust.

Reliable fittings that last.

Dura-Kote plating technology

3X
Hose fittings that will now offer 3x
the corrosion protection on carbon
steel fittings as compared to
competitive hose fittings. Eaton‘s
Carbon Steel Dura-Kote fittings provide up to
Corrosion 1000 hours of corrosion protection.
Protection This is a huge step forward in
metal fitting corrosion protection.

Dura-Seal technology

4S/6S Fitting

Class 0 This patent-pending innovation

from Eaton eliminates hose
assembly cool-down leakage,
Cool-Down while extending hose assembly
Leakage life, reducing equipment
Protection down-time.
FITTING INFORMATION SIMPLIFIED

Fittings for every application

Braided. Spiral. Reusable.

Braided hose fittings Spiral hose fittings

Premium Features: Premium Features:

1A (TTC-series) • New Dura-Kote plating technology for up to 4S/6S spiral series • New Dura-Kote plating technology for up
1,000 hours of corrosion resistance to 1,000 hours of corrosion resistance

• Bite the wire technology for best in class • New patent pending Dura-Seal technology
to eliminate hose assembly cool-down

4SA16FJ16
connection and sealing

12820
1AA8FR8
08Z-S68
09820

leakage
• Class zero leakage SAE J1176 on approved
hose styles • Class zero leakage SAE J1176 on approved
hose styles
• Over 550 Z-Series part numbers available
• Eaton’s MatchMate spiral - hose/fitting
• Eaton’s MatchMate program provides

6S24FL24
identification system program provides

15720
identification markings on the hose, hose identification markings on the hose, hose
fittings, and crimp dies for quick and easy fittings, and crimp dies for quick and easy
assembly assembly

Standard Features:
Two-piece Winner • Non-skive, two-piece crimp fitting
• One nipple part number for both EC115 &
Reusable fittings
EC215 standard hoses
• Meets industry specifications when used
with the EC115 & EC215 standard hoses Premium Features:
• Clear silver hexavalent chromium-free Reusable • New Dura-Kote plating technology for up
plating to 1,000 hours of corrosion resistance
• Carbon steel material • Engineered to provide peak performance
with Eaton’s core
braided hose products
• Can be assembled in the field without
special tooling
• Reduced downtime
• Quick repair
 COLOR LAYLINE GUIDE

Hose layline color guide*:

Understanding color designations.

Easily identify 1 or 2 wire braid, spiral, and temperature designations with Eaton’s *These are general color guidelines there are some
exceptions to this guide. There is no color distinction
color coded laylines.
between ultra-abrasion and premium abrasion.

AEROQUIP AQP
HIGH-TEMP
SPIRAL 4SH & LOW-TEMP SPIRAL R15 SPIRAL R13 SPIRAL R12 1-WIRE BRAID 2-WIRE BRAID BRAIDED R17

®
AEROQUIP GH681-12
®
®

®
®

®
®

AEROQUIP GH493-12

AEROQUIP GH781-12
AEROQUIP FC500-12

AEROQUIP FC639-12
AEROQUIP EC850-12

AEROQUIP EC600-12
EC525-12
19.0 MM (0.75 in)
DN19

19.0 MM (0.75 in)

DN19
MSHA IC-84/1
EXCEEDS SAE

19.0 MM (0.75

19.0 MM (0.75

19.0 MM (0.
19.0 MM (
19.0 MM

19.0 MM
DN19

DN19

DN19
DN1
DN

DN
UNDERSTANDING THE LINE

Beyond the layline

Eaton hoses include information beyond the layline.

Quality Assurance: Embossed layline

The new laylines offer enhanced traceability. Ink jet-printed information on the back- Dura-Tuff hoses only
side of each hose will include date codes and the country of origin. Additionally, some • Brand name • Pressure Country of origin • • Date code
laylines will include embossed features that stand up to the toughest, dirtiest, most
abrasive use cases—ensuring proper traceability and protecting quality no matter the
job.

Consistent order of information:

As reducing costs and increasing uptime become a greater focus across industries,
operating with efficiency is key. Eaton’s new laylines offer a standardized, consistent
order of information to help speed accurate part identification. Additionally, we’ve • Part number • MSHA • Plant code

standardized key information on both product lines with embossed and ink jet laylines
that will ensure consistent placement of important information.
Inkjet layline
All hoses
• Date code • Plant code
(YYYY/MM/DD)

• Country • Lot code

of origin
 ADDITIONAL INFORMATION

Eaton PowerSource
Your information headquarters
Eaton PowerSource™ is the hub for all of Fluid
Conveyance. This informational site houses Eaton’s
product, market and technical information.

eatonpowersource.com

Putting fluid conveyance information at your fingertips

1. Searchable fluid conveyance 6. Coupling cross reference tool
product information: 7. Custom bin label tool
• Part numbers
8. 2D/3D cad models
• Sizes
9. Hose assembly configurator
• Performance and specifications
• Branding information 10. Marketplace (authenticated PowerSource only)
2. Literature and videos 11. List prices and lead times
(authenticated PowerSource only)
3. Product value propositions
4. Crimp specifications To access these tools and more, visit and log in to PowerSource from
My.Eaton.com and then select tools.
5. Competitor cross reference tool
Eaton Eaton Eaton
Hydraulics Group USA Hydraulics Group Asia Pacific Hydraulics Group Europe
14615 Lone Oak Road Eaton Building Route de la Longeraie 7
Eden Prairie, MN 55344 No. 7 Lane 280 Linhong Road 1110 Morges
USA Changning District, Switzerland
Tel: 952-937-9800 Shanghai 200335 Tel: +41 (0) 21 811 4600
Fax: 952-294-7722 China Fax: +41 (0) 21 811 4601
Tel: (+86 21) 5200 0099
Fax: (+86 21) 2230 72401

© 2020 Eaton
All Rights Reserved Eaton is a registered trademark.
Printed in USA
Document No. A-HOHP-BB002-E All other trademarks are property
October 2020 of their respective owners.