• LOW VOLTAGE DISTRIBUTION • WIRING DEVICES

• EXTERNAL LIGHTING
• POWER & CONTROL • CAR CHARGERS

1
List of contents:

1. Company Profile
2. Company Documents
3. Materials List
4. Industrial Plugs & Sockets Data Sheet
5. List of Approvals
Company Profile
 Contents

1 -General Features 3
2 - Applications 4

3 - Main Distribution Board (MDB) 5

• Technical Data 6
• Appearance 7
4 - Sub Distribution Board (SMDB)
8
• Technical Data 9

5 - Final Distribution Board (DB) 10

• Technical Data 11
6 - CERTIFICATION------------------------------------------------------------------ 12

1 -General Catalogues 13
2 - Building 14

3 - Domotics 15
4 - Power 16
5 - Electric Car Chargers 17
6 - CERTIFICATION 18

2
 1 - General Features Safety
NEI quality systems and solutions are
developed according to relevant
international standards, offering a high
degree of personal and operating safety.

Reliability and Service

Continuity
NEI products are designed to withstand the
toughest environmental conditions and offer an
extremely high level of reliability even under the
toughest conditions.

Superior temperature performance up to 50°C

without derating with ACBs and MCCBs.

Reinforced framework to guarantee increased

resistance to earthquakes as per (IEC 60068-3-
3:2013).

Our products offer a variety of protection levels

(IP40, IP42 up to IP65) for use in a variety of
applications and harsh environments such as
cement works, wet areas, iron and steel industry,
etc….

Flexible and User

Friendly
NEI products provide years of safe, reliable
operations.The mechanical structure (frame) and
the main busbar systems are designed to be
maintenance-free and accessible from the front.

By eliminating the need to access the equipment

from the rear, our equipment can be installed
virtually anywhere in a facility.

The modular design allows for easy installation,

operation and maintenance and will
accommodate most project specifications and
requirements.

3
 2 - Applications
NEI Low Voltage products are used for electrical power distribution and control and are generally
installed downstream of transformers or generators that contain the main and distribution circuit
breakers. Loads are motors, heating equipment, lighting and air-conditioning units.

Buildings, Infrastructure
and Industrial:
Airports, hospitals, factories, shopping
malls, hotels,commercial and
residential towers.

Utility:
Power generation, transmission, distribution
substations,water and waste water treatment
plants.

Oil and Gas:

Oil and gas plants, petrochemical plants and
refineries.

4
 Main Distribution BoardATS, Synch, 2 out of 3,..

SIVACON S4 power distribution boards

 Modular system for safe, end-to-end, cost-efficient power distribution up to 4,000 A

 System to create design-verified switchgear assemblies in accordance with IEC 61439-1/-2
 Flexible application, thanks to a range of installation methods and variable accessories
 Simplified installation and device connection makes assembly faster
System overview

5
6
 Technical Data
Selection criteria SIVACON S4
Busbar position Top Bottom
Rated currents 4000 A 3200 A
• Busbars up to 4000 A 3200 A
• Infeed up to 100 kA 100 kA
Short-circuit strength
• Rated short-time withstand current Icw (1 s) 220 kA 220 kA
• Rated peak withstand current Ipk ✓ 1) ✓ 1)
Mounting design ✓ ✓
• Fixed-mounted design ✓ --
• In-line design, fixed-mounted -- --
• In-line design, plugged in ✓ ✓
• Withdrawable unit design ✓ ✓
Type of installation -- --
• Free-standing/against wall -- --
• Back to back ✓ ✓
• Double-fronted -- --
Use
•
control centers
Motor
•
r distribution boards
Powe
Manufactured by SIVACON Technology
Partner
✓ Available

*For higher altitude ,ambient temperature and special colors please contact NEI.

Appearance
With its new design, NEI MDB has changed the concept of the bulky LV main distribution board and
movedthe competition to the next level, it is manufactured and tested to fulfil the ultimate
needs in all segments.

NEI’s ability to change the color of the switchgear according to customer requirements and
applicable standards( RAL and ANSI series ) fortifies the unique appearance and flexibility.

7
 5 - Sub Distribution Board (SMDB)
The SMDB Distribution Board is is a component of an electricity supply system which divides an electrical
power feed into subsidiary circuits while providing a protective fuse or CB for each circuit.
NEI Sub Main Distribution Board (SMDB)
serves as a complete solution for the
distribution of power and is available up to
630A. The design provides complete
flexibility at the time of installation,
complying with IEC 61439-1,2.

SMDB Overview
• SMDB is used in a variety of sectors
such as utilities and co-generation,
pharmaceutical factories, generator
manufacturers, critical power plants,
datacenters and in the oil and gas
industry.

• Easy interchangeability of components

• Wall mounted and free standing designs

• Available in 2/14 way (3Pole) to 6/42

way (1 Pole)outgoing MCCB’s

• Enclosure Protection Class up to IP55

• Bare Copper / tin plated / silver plated

/ PVC sleeved copper busbars

• Available in stainless steel enclosures

for outdoorapplications

• Neutral and earth busbars can be rated

up to 100%of the main busbar

• Internal separation up to Form-3a

Standards
• IEC 61439 -1 & 2 • IEC 60529 • IEC62262 • IEC 61641
• IEC60068-3-3 • IEC60068-2-57

8
 Test Certificate
• (ASTA /UL)

Technical Data
EnclosureName SMDB
Rated operating voltage Ue Up to 690 V
Rated insulation voltage Ui Up to 800V
Rated impulse withstand voltage Uimp Up to 8 kV

Rated voltages Overvoltage category Up to IV

Material group IIIa
Degree of pollution 3
Rated frequency 50/60 Hz
Pure copper bars, with
Busbar type
99.9%conductivity
Electrical Data Rated current for Distribution Busbar In Up to 630 A
Rated current
Conditional short circuit current Icc 50 kA @ 0.25PF
Rated short-time withstand current Icw 50 kA @ 1 Sec
Rated peak withstand current Ipk 105 kA
Incoming feeders Up to 630 A
Incoming and outgoing
Distribution feeders Up to 250 A
Form of separation Up to 3a
Direct contact protection
Protection against electric shock Yes
Ventilation Normal
Recommended depth 225 mm
Skid base height 50 mm
Number of ways Up to 14
External degree of protection IP Up to IP66
BLACK steel/
Sheet metal material Electrogalvanized
Steel components
Mechanical
Characteristics Sheet metal thickness Up to 2 mm
Electrostatic powder coating/
Surface protection
Epoxy
Standard colors RAL7035*
Wall mounted and free
Panel mounting
standing

Ambient temperature (°C) 40*

Installation environment Relative humidity max 50% at 40°C
Maximum altitude Up to 2000m*
General
Busbar system 3 PH, Neutral and PE
Busbar Busbar insulating material PVC sleeving
Busbar plating material Bare / tin / silver

9
 6 - Final Distribution Board (DB)
NEI final distribution board (DB) is designed to be a safe and reliable switching device for the end user
wherethe most important part in the network is human protection.

DB board provides the safest solution for the final load in residential, commercial and industrial premises.

DB Overview
• Easy interchangeability of components
• Internal separation up to form 3a
• Rated short-time withstand current (Icw) per 0.25s up
to 25 kA
• Peak withstand current Ipk 50 KA
• Ingress protection up to IP54
• Flexibility to provide up to 48 ways

Standards
• IEC 61439 -1 & 3 • IEC 60529 • IEC62262 • IEC 61641
• IEC60068-3-3 • IEC60068-2-57

Test Certificate
• (ASTA/KEMA )

13
0
 Technical Data
EnclosureName DB
Rated operating voltage Ue 415 V
Rated insulation voltage Ui 500 V
Rated impulse withstand voltage Uimp Up to 4 kV

Rated voltages Overvoltage category Up to IV

Material group IIIa
Degree of pollution 3
Rated frequency 50/60 Hz
Pure Copper Bars, with
Busbar type
99.9%conductivity
Rated current for Distribution Busbar In Up to 250 A
Electrical Data
Rated current Rated diversity factor (RFD) 1
Conditional short circuit current Icc 18 KA
Rated short-time withstand current Icw 25 kA @ 0.25 Sec
Rated peak withstand current Ipk Up to 52,5 kA
Incoming feeders Up to 250 A
Incoming and outgoing
Distribution feeders Up to 63 A
Form of separation Up to 3a
Direct contact protection
Protection against electric shock Yes
Ventilation Normal
Number of ways Up to 48

Degree of protection
External degree of protection IP Up to IP54
BLACK steel /
Sheet metal material Electrogalvanized
Steel Component
Mechanical
Characteristics Sheet metal thickness Up to 2 mm
Electrostatic powder coating/
Surface protection
Epoxy
Standard colors RAL7035*
Free standing and wall
Panel mounting
mounting
Ambient temperature (°C) 40*
Installation environment Relative humidity max 50% at 40°C
Maximum altitude Up to 2000m*
General
Busbar system 3 PH, Neutral and PE
Busbar Busbar insulating material PVC sleeving
Busbar plating material Bare / tin / Silver

*For higher altitude ,ambient temperature and special colors please contact NEI.

14
1
15
2
 1 - General Catalogues
Authorized Distributer
NEI is an authorized distributer of GEWISS Domotics, Buildings, Lighting and Power Catalogues products.

17
3
 2 - Building

18
4
 3 - Domotics

19
5
 4 - Power

20
6
 5 – Electric Car Chargers

21
7
22
8
Company Documents