1 9 10

X
A A

48 48
191
0 0
142.5
27.5 B
27

O8 DRILL X 106.5 DP.

31.5 O11.44 X 15 DEEP
O 8 X 52 DP. 42.5 (03) HOLES
62 0 MARKED AS 'A1'
A1
G 3/8 X 15 DP. O8 DRILL X 90 DP.
O10 DRILL X 45 DP. O11.44 X 15 DEEP
(01) HOLES
0 31.5

O 6 X 57 DP.

G 3/8 X 15 DP. 63 O6 DRILL X 25 DP.

A1
O10 DRILL X 45 DP. O11.44 X 15 DEEP
52.5 (01) HOLES
239 239 90
G 3/8 X 25 DP.
O12 DRILL X 40 DP.
196.5
G 1/8 X 10 DP.
93 O6 DRILL X 154 DP. 128
A1 O8 DRILL THRU
112.5 G 1/8 X 10 DP. O11.44 X 15 DEEP
O8 DRILL THRU (01) HOLES
128.5 159
O 8 X 165 DP.
18.38 169.5
G 1/2 X 10 DP.
156 O16 DRILL X 135 DP. G 1/8 X 10 DP.
O8 DRILL X 74.5 DP.

B SECTION B-B
11
13 6.5 4 4
G 1/8 X 10 DP. G 1/8 X 10 DP.
G 1/8 X 10 DP. O8 DRILL X 58 DP. O6 DRILL THRU
28.28 G 1/8 X 10 DP. O8 DRILL X 140 DP. 8
A 7.5
O6 DRILL X 70 DP.
14.14 M3 X 20 DEEP O14 X 42 DP.
(04) HOLES G 1/8 X 10 DP.
O6 DRILL THRU 48 11
30.5
14.14 48 19 2.5
28.28 37.5 59.5
12.5

3.5 70 100
110 40.5
O 22 X 165 DP. VIEW FROM 'X'
60 This Drawing is property of Forbes & Company limited & must be returned on request
O 8 X 186.5 DP. It must be not used, copied or lent for any purpose without authorization.
DETAIL A 191 All Dimensions are in mm FORBES & COMPANY LIMITED I

NOTE: CAD SYS :- Creo Signature Date

B-13, MIDC WALUJ,
FOR TAPPING CD, TOLERANCE TO BE MAINTAINED WITHIN u0.1 AURANGABAD - 431133.
ABW 03-01-2020
FOR FREE HOLE CD, TOLERANCE TO BE MAINTAINED WITHIN u0.2
Drawn :-

- -
FOR DOWEL HOLE CD, TOLERANCE TO BE MAINTAINED WITHIN u0.02 Checked :-
Project No.:- -
Approved :- - -
UNSPEFIED TOLERANCES / DEVIATION ANGULAR TOL.
Finish :- 239 X 191 X 48 Description:- MANIFOLD
OVER - 6 30 120 400 1000 2000 - 10° 50° 100°
TO 6 30 120 400 1000 2000 3000 10° 50° 100°
Machining:- ( ) Rev No.:-
J -
Drawing / Part No.:- MANIFOLD
J
Material :- TRASPERENT PVC -
DEVIATION ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2 ±1° ±30' ±20' ±10' Weight :- 8.76 KG
REMOVE BURRS, SHARP EDGES & CORNERS Scale:- NTS - Page No.:-1 OF 1
DO NOT SCALE 0.5 X 45°, UNLESS OR OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN mm Rev.No Drawn Checked Description Date Heat Treatment:- - Projection:- - Sheet:-

1 2 3 4 5 6 7 8 9 10