https://www.phoenixcontact.

com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Screw connection,
number of connections: 2, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 5.2 mm, color: red, mounting
type: NS 35/7,5, NS 35/15, NS 32

Your advantages
 Universal foot which can be used on NS 35... and NS 32... DIN rails
 The UK universal screw terminal block series has the typical features which are decisive for practical applications
 Potential distribution via fixed bridges in the terminal center or insertion bridges in the clamping space

Key Commercial Data

Packing unit 1 pc
Minimum order quantity 50 pc

GTIN

GTIN 4017918599416
Weight per Piece (excluding packing) 6.400 g
Custom tariff number 85369010
Country of origin Germany

Technical data
General
Number of levels 1
Number of connections 2
Potentials 1
Nominal cross section 2.5 mm²
Color red
Insulating material PA

06/08/2020   Page 1 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Technical data
General
Flammability rating according to UL 94 V2
Rated surge voltage 8 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 0.77 W
Maximum load current 24 A (with a 2.5 mm² conductor cross section)
Nominal current IN 24 A
Nominal voltage UN 800 V
Open side panel Yes
Ambient temperature (operation) -60 °C ... 85 °C
Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Result of surge voltage test Test passed
Surge voltage test setpoint 9.8 kV
Result of power-frequency withstand voltage test Test passed
Power frequency withstand voltage setpoint 2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
Test passed
connection)
Result of bending test Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
Tensile test result Test passed
Conductor cross section tensile test 0.2 mm²
Tractive force setpoint 10 N
Conductor cross section tensile test 2.5 mm²
Tractive force setpoint 50 N
Conductor cross section tensile test 4 mm²
Tractive force setpoint 60 N

06/08/2020   Page 2 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Technical data
General
Result of tight fit on support Test passed
Tight fit on carrier NS 32/NS 35
Setpoint 1N
Result of voltage-drop test Test passed
Requirements, voltage drop ≤ 3.2 mV
Result of temperature-rise test Test passed
Short circuit stability result Test passed
Conductor cross section short circuit testing 2.5 mm²
Short-time current 0.3 kA
Conductor cross section short circuit testing 4 mm²
Short-time current 0.48 kA
Result of thermal test Test passed
Proof of thermal characteristics (needle flame) effective duration 30 s
Relative insulation material temperature index (Elec., UL 746 B) 125 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C

Dimensions
Width 5.2 mm
End cover width 1.5 mm
Length 42.5 mm
Height NS 35/7,5 42 mm
Height NS 35/15 49.5 mm
Height NS 32 47 mm

Connection data
Connection method Screw connection
Screw thread M3
Stripping length 7 mm
Tightening torque, min 0.6 Nm
Tightening torque max 0.8 Nm
Connection in acc. with standard IEC 60947-7-1
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Min. AWG conductor cross section, flexible 24

06/08/2020   Page 3 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Technical data
Connection data
Max. AWG conductor cross section, flexible 14
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
Cross section with insertion bridge, solid max. 2.5 mm²
Cross section with insertion bridge, stranded max. 2.5 mm²
2 conductors with same cross section, solid min. 0.2 mm²
2 conductors with same cross section, solid max. 1 mm²
2 conductors with same cross section, stranded min. 0.2 mm²
2 conductors with same cross section, stranded max. 1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
0.5 mm²
with plastic sleeve, minimum
Two conductors with the same cross section, flexible, with TWIN ferrules,
1.5 mm²
with plastic sleeve, maximum
Two conductors with the same cross section stranded, with ferrule and
0.25 mm²
without plastic sleeve, minimum
Two conductors with the same cross section stranded, with ferrule and
1 mm²
without plastic sleeve, maximum
Connection in acc. with standard IEC/EN 60079-7
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Internal cylindrical gage A3

Standards and Regulations

Connection in acc. with standard CSA
IEC 60947-7-1
Flammability rating according to UL 94 V2

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”

Drawings
06/08/2020   Page 4 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Circuit diagram

Classifications
eCl@ss

eCl@ss 10.0.1 27141120

eCl@ss 4.0 27141100
eCl@ss 4.1 27141100
eCl@ss 5.0 27141100
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141120
eCl@ss 8.0 27141120
eCl@ss 9.0 27141120

ETIM

ETIM 2.0 EC000897

ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC000897
ETIM 6.0 EC000897
ETIM 7.0 EC000897

UNSPSC

UNSPSC 6.01 30211811

UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 18.0 39121410
UNSPSC 19.0 39121410
UNSPSC 20.0 39121410
UNSPSC 21.0 39121410

Approvals
Approvals

06/08/2020   Page 5 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Approvals

Approvals

DNV GL / CSA / UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / EAC / EAC / cULus Recognized

Ex Approvals

IECEx / ATEX / UL Recognized / cUL Recognized / GL / EAC Ex / DNV GL-EX / cULus Recognized

Approval details

DNV GL 
  https://approvalfinder.dnvgl.com/  TAE00001CT

CSA 
  http://www.csagroup.org/services-industries/product-listing/  13631

   
Nominal voltage UN 300 V
Nominal current IN 20 A
mm²/AWG/kcmil 28-12

UL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425

  B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 20 A 20 A 5A
mm²/AWG/kcmil 30-12 30-12 30-12

KEMA-KEUR 
  http://www.dekra-certification.com  2183462.01

   
Nominal voltage UN 800 V
mm²/AWG/kcmil 2.5

06/08/2020   Page 6 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Approvals

cUL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425

  B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 20 A 20 A 5A
mm²/AWG/kcmil 30-12 30-12 30-12

IECEE CB Scheme 
  http://www.iecee.org/  NL-26110

   
Nominal voltage UN 800 V
mm²/AWG/kcmil 2.5


 RU C-
EAC   
DE.A*30.B.01742


 RU C-
EAC   
DE.BL08.B.00534

cULus Recognized 
    

Accessories
Accessories
Bridge

Fixed bridge - FB-150 METER - 0201595

Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long
 
 

06/08/2020   Page 7 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories
DIN rail

DIN rail perforated - NS 32 PERF 2000MM - 1201002

DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015

DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
 
 

06/08/2020   Page 8 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
 
 

06/08/2020   Page 9 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

End cap - NS 35/ 7,5 CAP - 1206560

DIN rail end piece, for DIN rail NS 35/7.5

 
 

DIN rail perforated - NS 35/15 PERF 2000MM - 1201730

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
 
 

06/08/2020   Page 10 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
 
 

End cap - NS 35/15 CAP - 1206573

DIN rail end piece, for DIN rail NS 35/15

 
 

06/08/2020   Page 11 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798

DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
 
 

End block

End clamp - CLIPFIX 35 - 3022218

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
 
 

End clamp - CLIPFIX 35-5 - 3022276

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
 
 

End clamp - E/NS 35 N - 0800886

End clamp, width: 9.5 mm, color: gray

 
 

End clamp - E/UK - 1201442

End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
 
 

06/08/2020   Page 12 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

End clamp - E/UK 1 - 1201413

End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
 
 

End cover

End cover - D-UK 2,5 - 3001022

End cover, length: 42.5 mm, width: 1.5 mm, height: 30.7 mm, color: gray
 
 

Insertion bridge

Insertion bridge - EBL 3- 5 - 2303158

Insertion bridge, pitch: 5.2 mm, number of positions: 3, color: gray

 
 

Insertion bridge - EBL 2- 5 - 2303145

Insertion bridge, pitch: 5.2 mm, number of positions: 2, color: gray

 
 

Insertion bridge - EBL 10- 5 - 2303132

Insertion bridge, pitch: 5.2 mm, number of positions: 10, color: gray
 
 

06/08/2020   Page 13 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Insulating sleeve

Insulating sleeve - MPS-IH WH - 0201663

Insulating sleeve, color: white

 
 

Insulating sleeve - MPS-IH RD - 0201676

Insulating sleeve, color: red

 
 

Insulating sleeve - MPS-IH BU - 0201689

Insulating sleeve, color: blue

 
 

Insulating sleeve - MPS-IH YE - 0201692

Insulating sleeve, color: yellow

 
 

Insulating sleeve - MPS-IH GN - 0201702

Insulating sleeve, color: green

 
 

06/08/2020   Page 14 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Insulating sleeve - MPS-IH GY - 0201728

Insulating sleeve, color: gray

 
 

Insulating sleeve - MPS-IH BK - 0201731

Insulating sleeve, color: black

 
 

Labeled terminal marker

Zack marker strip - ZB 5 CUS - 0824962

Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
 
 

Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017

Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ...
500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm,
Number of individual labels: 10
 
 

Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020

Zack marker strip, white, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
 
 

06/08/2020   Page 15 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15
x 10.5 mm, Number of individual labels: 10
 
 

Zack marker strip - ZB 5,LGS:L1-N,PE - 1050415

Zack marker strip, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
 
 

Marker for terminal blocks - UC-TM 5 CUS - 0824581

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual
labels: 96
 
 

Marker for terminal blocks - UCT-TM 5 CUS - 0829595

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual
labels: 72
 
 

Mounting material

Screw - ZSR - 2303608

Screw
 
 

06/08/2020   Page 16 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories
Partition plate

Separating plate - TS-KK 3 - 2770215

Separating plate, length: 14 mm, width: 0.5 mm, height: 16 mm, color: gray
 
 

Partition plate - ATP-UK - 3003224

Partition plate, length: 56 mm, width: 1.5 mm, height: 45.7 mm, color: gray
 
 

Screw bridge

Fixed bridge - FBRI 20-5 N - 3000515

Fixed bridge, pitch: 5 mm, number of positions: 20, color: silver

 
 

Fixed bridge - FBRI 16-5 N - 3000476

Fixed bridge, number of positions: 16, color: silver

 
 

Fixed bridge - FBRI 12-5 N - 3000434

Fixed bridge, number of positions: 12, color: silver

 
 

06/08/2020   Page 17 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Fixed bridge - FBRI 2-5 N - 3000227

Fixed bridge, pitch: 5 mm, number of positions: 2, color: silver

 
 

Fixed bridge - FBRI 10-5 N - 2770642

Fixed bridge, pitch: 5.2 mm, number of positions: 10, color: silver
 
 

Fixed bridge - FBRI 40-5 N - 3006823

Fixed bridge, number of positions: 40, color: silver

 
 

Screwdriver tools

Screwdriver - SF-SL 0,6X3,5-100 S-VDE - 1212587

Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use
as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
 
 

Short-circuit connector

06/08/2020   Page 18 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Short-circuit connector - KSS 5 - 2303543

Short-circuit connector, pitch: 5 mm, number of positions: 2, color: black

 
 

Switching jumper

Switching jumper - USBR 2-7 - 2303239

Switching jumper, pitch: 7 mm, number of positions: 2, color: silver

 
 

Switching jumper - USBRJ 2-7 - 2305538

Switching jumper, number of positions: 2, color: silver

 
 

Switching jumper - SBRN 2-7 - 1413230

Switching jumper, pitch: 7 mm, number of positions: 2, color: silver

 
 

Terminal marking

Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004

Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual labels:
10
 
 

06/08/2020   Page 19 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Marker for terminal blocks - UC-TM 5 - 0818108

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96
 
 

Marker for terminal blocks - UCT-TM 5 - 0828734

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size:
4.6 x 10.5 mm, Number of individual labels: 72
 
 

Test plug terminal block

Reducing plug - RPS - 0201647

Reducing plug, color: gray

 
 

Test plugs - PS-UK 2,5 B/E - 3001132

Test plugs, color: red

 
 

Test plugs - PS-UK 2,5 B/Z-5 - 3001226

Test plugs, color: red

 
 

06/08/2020   Page 20 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Test plugs - MPS-MT - 0201744

Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
 
 

Test socket

Female test connector - PSBJ 3/13/4 - 0201304

Female test connector, color: silver

 
 

Female test connector - PSB 3/10/4 - 0601292

Female test connector, color: silver

 
 

Warning label printed

Warning label - WS 4- 5 - 0805344

Warning plate, with 2 plastic screws, across 4 terminal blocks, pitch 5 mm

 
 

Warning label - WS 3- 5 - 0805357

Warning plate, with 2 plastic screws, across 3 terminal blocks, pitch 5 mm

 
 

06/08/2020   Page 21 / 22
https://www.phoenixcontact.com/us/products/0719074

Feed-through terminal block - UK 2,5 N RD - 0719074

Accessories

Warning label - WS 5- 5 - 0805331

Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 5 mm

 
 

Phoenix Contact 2020 © - all rights reserved

http://www.phoenixcontact.com

06/08/2020   Page 22 / 22