The document is a test report for safety shoes submitted by Zhejiang Leima Shoes Ind. Co., Ltd. It tests the shoes against various standards including EN ISO 20345:2011 and ASTM F2413-17. The tests include upper/outsole bond strength, impact resistance, compression resistance, electric hazard resistance, penetration resistance, tear strength of the upper and outsole, and abrasion resistance of the outsole. All samples tested, which were size 42 brown PU/rubber injection lace up boots, passed all requirements for each test.
The document is a test report for safety shoes submitted by Zhejiang Leima Shoes Ind. Co., Ltd. It tests the shoes against various standards including EN ISO 20345:2011 and ASTM F2413-17. The tests include upper/outsole bond strength, impact resistance, compression resistance, electric hazard resistance, penetration resistance, tear strength of the upper and outsole, and abrasion resistance of the outsole. All samples tested, which were size 42 brown PU/rubber injection lace up boots, passed all requirements for each test.
The document is a test report for safety shoes submitted by Zhejiang Leima Shoes Ind. Co., Ltd. It tests the shoes against various standards including EN ISO 20345:2011 and ASTM F2413-17. The tests include upper/outsole bond strength, impact resistance, compression resistance, electric hazard resistance, penetration resistance, tear strength of the upper and outsole, and abrasion resistance of the outsole. All samples tested, which were size 42 brown PU/rubber injection lace up boots, passed all requirements for each test.
The document is a test report for safety shoes submitted by Zhejiang Leima Shoes Ind. Co., Ltd. It tests the shoes against various standards including EN ISO 20345:2011 and ASTM F2413-17. The tests include upper/outsole bond strength, impact resistance, compression resistance, electric hazard resistance, penetration resistance, tear strength of the upper and outsole, and abrasion resistance of the outsole. All samples tested, which were size 42 brown PU/rubber injection lace up boots, passed all requirements for each test.
Applicant: ZHEJIANG LEIMA SHOES IND. CO., LTD. Date: May 12, 2018 NO.188 JIXIAN ROAD, ECONOMIC DEVELOPMENT ZONE, RUIAN CITY, ZHEJIANG, CHINA Attn: ROLLA
Sample Description: Two (2) groups of submitted samples said to be: (A) Three and a half (3.5) pairs of PU/Rubber Injection lace up safety ankle boots in Brown, Style: Durango(804- 4113) (B) Two (2) pieces of Brown first layer of smooth leather used for Upper. Standard : EN ISO 20345:2011 ASTM F2413-17 Size : EUR 42 (US 9) Buyer : Bata Referring Style : Snow, Snow Antiacido Customer P.O. No. : Chile: 66782, 66786 Date Received/Date Test Started: May 07, 2018 Date Final Information Confirmed: --
Test Result Please Refer To Attached Page(S).
Should you have any query on this report, you may contact at gzfootwear@intertek.com
Authorized By: For Intertek Testing Services Shenzhen Ltd. Guangzhou Branch
4 Electric Hazard Resistance Footwear (ASTM F2412-11, 9)
ASTM F2413 (A) Leakage Current Pass/Fail Requirement Left: 0.42 mA * Pass Left: 0.32 mA * Pass Right: 0.37 mA * Pass
Remark: *= No Current Flow Or Leakage Current In Excess Of 1.0 mA Under The Application Of 18 000 V At 60 Hz AC For 1 Minute.
5 Penetration Resistance (Whole Footwear With Non-metallic Anti-Penetration Insert)(EN ISO 20344:2011(5.8.3))
Sample Size Results Requirement Pass/Fail
The Tip Of The Test Nail Did (A) 42 Left Not Penetrate Through The Min. 1100 N (*) Pass Test Piece Before 1100 N The Tip Of The Test Nail Did Right Not Penetrate Through The Min. 1100 N (*) Pass Test Piece Before 1100 N
Remark: *= The Tip Of The Test Nail Shall Not Penetrate Through The Test Piece.
6 Tear Strength (Upper) (EN ISO 20344:2011(6.3), ISO 3377-2:2002)
Sample Size Result Requirement Pass/Fail
(A) 42 Mean Value 192.5 N Min. 120 N Pass
Expanded Uncertainty: 2.77 N, With k= 2.06 At 95% Confidence Level.
10 Resistance To Fuel Oil (Outsole) (EN ISO 20344:2011(8.6.1), ISO 1817:2011(8.3), EN ISO 868:2003)
Sample Size Result Requirement Pass/Fail
(A) 42 Change In Volume: +5.61% Max. +12%(*) Pass
Remark: *= If The Test Piece Shrinks By More Than 1% In Volume Or Increase In Hardness By More Than 10 Shore A Hardness Units, Then A Further Flex Test Shall Be Performed In Accordance With The Method Described In EN ISO 20344:2011, 8.6.2. (+) Means Increase And (-) Means Shrinkage.
Expended Uncertainty: 0.16%, With k= 2.13 At 95% Confidence Level.
11 pH Value
As Per EN ISO 20344:2011, 6.9, With Reference To ISO 4045:2008, pH Value Was Measured By pH Meter.
Result Difference Figure Requirement
4.05 - *
Remark: *= Min. 3.20, If The pH Value Is Below 4.00, The Difference Figure Shall Be Less Than 0.70
Tested Component: Dark Brown Synthetic Material With Brown Leather Backing (Sample B)
Conclusion: Standard Result EN ISO 20345:2011 For pH Value Pass This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct.
