GZHT91030146 : Intertek Testing Services Shenzhen Ltd. Guangzhou Branch

TEST REPORT Number: GZHT91030146
Applicant: GOLDEN SKY FOOTWEAR LTD. Date: Apr 20, 2021

PLOT# 581-592, WARD-7, PALLI BIDYUT,
CHANDRA, KALIAKAIR,
GAZIPUR-L 75 1 BANGLADESH
Attn: ASIF
Sample Description:
Two (2) Groups Of Submitted Sample Said To Be:
(A) Outsole In Black.
(B) Testing Sheet In Black.
EVA Outsole
Test Specification : --
Season : --
Colour : Black
Order No. : --
Style No. : CW1029W(31%)
Manufacturer : --
Supplier : --
Vendor : --
Buyer : Clarks
Qty of Sample : --
End Uses : --
Category : --
Goods Exported To : --
Country Of Origin : Bangladesh
Date Received/Date Test Started : Apr 12, 2021
Authorized By:
For Intertek Testing Services Shenzhen Ltd.
Guangzhou Branch
Guiliang Dong
Senior Lab Manager
*GZHT91030146* Page 1 Of 9
/joychan
Intertek Testing Services Shenzhen Ltd. Guangzhou Branch
深圳天祥质量技术服务有限公司广州分公司
Room 02, 1-8/F. & Room 01, E101/E201/E301/E401/E501/E601/E701/E801, 3/F., Hengyun Building, 235 Kaifa Ave., Guangzhou
No.7-2, Caipin Road, Guangzhou Science City, GETDD, Guangzhou, Guangdong, China Economic & Technological Development District, Guangzhou,
广州经济技术开发区科学城彩频路 7 号之二第 1－8 层 02 房、01 房 101、 China
E201、E301、E401、E501、E601、E701、E801 中国广州经济技开发区开发大道 235 号恒运大厦 3 楼
Tel: +86 208213 9001 Fax: +86 20 82089909 Postcode: 510663 Tel: +86 20 83966868 Fax: +86 20 82228169 Postcode: 510730
Conclusion:
Index Test Item Result
1. Heavy Metals (Total Content) Pass
2. Heavy Metals (Extractable Content) Pass
3. Phthalate Content Test Pass
4. Sole Hardness (Durometer Method) Pass
5. Specific Gravity Test (Balance Method) Pass
6. Bata Belt Flexing Resistance Pass
7. Split Tear Strength Pass
8. Compression Set Test Pass
9. Abrasion Resistance Pass
10. Slip Resistance Pass
Should you have any query on this report, you may contact at gzfootwear@intertek.com
Authorized By:
For Intertek Testing Services Shenzhen Ltd.
Guangzhou Branch
Guiliang Dong
Senior Lab Manager
*GZHT91030146* Page 2 Of 9
/joychan
Tests Conducted (As Requested By The Applicant)
1 Heavy Metals (Total Content)
With Reference to ISO 17072-2:2019, BS EN 16711-1:2015 (for textiles) and/or CPSC-CH-E1002-8.3 and/or CPSC-
CH-E1003-09.1 and/or CPSC-CH-E1001-8.3, Acid Digestion Method Was Used and Total Content Was Determined
by Inductively Coupled Plasma - Optical Emission Spectrometry(ICP-OES).
Element Result (ppm) Clarks’ Requirement (ppm)
Total Lead (Pb) ND 90

Total Cadmium (Cd) ND 90
Total Mercury (Hg) ND 90
Total Arsenic (As) ND 90
Remark: ppm = Parts Per Million = mg/kg

ND = Not Detected
Detection Limit = 10ppm
Tested Components: Black Foam (Outsole Of Sample A).
/ joychan Page 3 Of 9
2 Heavy Metals (Extractable Content)
As Per Client’s Request, With Reference to BS EN71-3:2019 and Followed by Inductively Coupled Plasma Optical
Emission Spectrometry (ICP – OES), Ion Chromatography (IC)
Result (mg/kg)
Reporting Limit Limit (mg/kg)
Element
(mg/kg) (Not Leather)
Aluminium (Al) ND 300 28130

Antimony (Sb) ND 10 560
Arsenic (As) ND 10 47
Barium (Ba) ND 10 18750
Boron (B) ND 50 15000
Cadmium (Cd) ND 5 17
Chromium (III) (Cr III) ++ ND 10 460
Chromium (VI) (Cr VI) ++ ND 0.025 0.053
Cobalt (Co) ND 10 130
Copper (Cu) ND 10 7700
Lead (Pb) ND 10 23
Manganese (Mn) ND 10 15000
Mercury (Hg) ND 10 94
Nickel (Ni) ND 10 930
Selenium (Se) ND 10 460
Strontium (Sr) ND 100 56000
Tin (Sn) ND 10 180000
Organic tin++ ND 2.0 12
Zinc (Zn) ND 100 46000
Remark : mg/kg = milligram per kilogram

ND = Not detected
++ = Unless the test results were marked with "#" or "∆", Chromium (III) & Chromium (VI)
and Organic tin contents were not directly determined and were derived from migration
results of total chromium and tin respectively.
- Organic tin test result was expressed as tributyl tin.
3 Phthalate Content Test:
With Reference to BS EN ISO 14389: 2014 (for textile) or CPSC-CH-C001-09.4, Solvent Extraction Method Was
Used and Phthalates Content Was Determined by Gas Chromatography Mass - Spectrometry (GC-MS).
No. Compounds Clarks’

Result In ppm Requirement
In ppm
1 Di-(2-EthylHexyl)-Phthalte (DEHP) ND -
2 Dibutyl Phthalate (DBP) ND -
3 Benzylbutyl Phthalate (BBP) ND -
4 Di-(Iso-Nonyl) Phthalate (DINP) ND -
5 Di-Iso-Decyl Phthalate (DIDP) ND -
6 Di-(N-Octyl) Phthalate (DNOP) ND -
7 Di-isobutyl Phthalate(DIBP) ND -
8 Di-n-hexyl Phthalate(DnHP) ND -
9 1,2-Benzeniedicarboxylic acid, di-C7-11- ND -
branced and linear alkyl esters (DHNUP)
10 1,2-Benzenedicarboxylic acid, di-C6-8- ND -
branched alkyl esters, C7-rich (DIHP)
11 Bis(2-methoxyethyl) phthalate (DMEP) ND -
12 Diisopentylphthalat(DIPP) ND -
13 N-pentyl-isopentylphthalate (NPiPP) ND -
14 Dipentyl phthalate (DPP) ND -
15 1,2-Benzenedicarboxlyic acid, ND -
dipentylester, branched and linear
16 1,2- Benzenedicarboxlyic acid, ND -
dihexylester, branched and linear
17 1,2-Benzenedicarboxlyic acid, di-C6-10- ND -
alkyl esters
18 Dicyclohexyl phthalate (DCHP) ND -
19 Diisohexyl Phthalate ND -
- Sum of 19 Phthalates ND 1000
Remark: ND = Not Detected

Detection Limit = 100 ppm
ppm = Parts Per Million = mg/kg
4 Sole Hardness (Durometer Method) (Clarks Test Method No.202B, condition at 23± 2°C):
(B) Clarks’
Requirement
71 Asker C 40-85 Asker C
5 Specific Gravity Test (Balance Method) (Clarks Test Method No. 203B):
(B) Clarks’
Requirement
0.33 =>0.25
6 Belt Flex Test (Clarks Test Method, No.205, Mandrel:φ 90 mm):
(A) Clarks’
Requirement
After 2,500 Flexes:

Observation: The Initial Cut Has No Significant Increase In Length, *
And No Additional Cracks.
After 5,000 Flexes:

After 10,000 Flexes:





Observation: The Initial Cut Has No Significant Increase In Length,


Remark: *= Spontaneous Cracking =＞40,000 Flexes. Cut Growth=＞20,000 Flexes.
7 Split Tear Strength (Clarks Test Method No. 206):
(B) Clarks’
Requirement
Along: 3.5 kgf/cm Min. 2.5 kgf/cm

Across: 3.5 kgf/cm Min. 2.5 kgf/cm
8 Compression Set Test (Clarks Test Method No.208A):
(B) Clarks’
Requirement
Compression Set: 9% =< 30 %
9 Abrasion Resistance (Clarks Test Method No.218, Load: 10N):
(B) Clarks’
Requirement
Density: 0.33 g/cm3

Relative Volume Loss: 43.6 mm3 <= 250 mm3
10 Slip Resistance (SATRA TM144: 2011, Clay Tile Surface, Vertical Force: 400 N, Test Temperature: 23℃)
(A) Clarks’
Requirement
Left(Dry Then Wet) Right(Wet Then Dry)
Forepart Dry 0.40 0.39 =>0.3
Forepart Wet 0.37 0.36 =>0.3
Heelpart Dry 0.40 0.41 =>0.3
Heelpart Wet 0.37 0.37 =>0.3
Note:
It Must Be Noted That The Slip Resistance Test Carried Out In This Report Denotes An Indication Of Slip
Of This Particular Footwear/Component On The Surface Mentioned In The Test Item. It Is Important To
Note That Footwear Is Subject To Many Different Conditions Encountered In Everyday Use And That It Is
Impossible To Make Footwear Resistant To Slip In All Conditions. Nevertheless, It Is Generally Accepted
That Problems Are Minimized If The Guideline Coefficients Of Friction Are Achieved.
End of Report
This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a
recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than
the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing
Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save
as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any
liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our
gross negligence or wilful misconduct. No copy of the test report(except for full text copy) shall be made without the written approval by
Intertek.

GZHT91030146 : Intertek Testing Services Shenzhen Ltd. Guangzhou Branch

Uploaded by

Copyright:

Available Formats

GZHT91030146 : Intertek Testing Services Shenzhen Ltd. Guangzhou Branch

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GZHT91030146 : Intertek Testing Services Shenzhen Ltd. Guangzhou Branch

Uploaded by

Copyright:

Available Formats

TEST REPORT Number: GZHT91030146

Applicant: GOLDEN SKY FOOTWEAR LTD. Date: Apr 20, 2021

2. Heavy Metals (Extractable Content) Pass

3. Phthalate Content Test Pass

4. Sole Hardness (Durometer Method) Pass

5. Specific Gravity Test (Balance Method) Pass

6. Bata Belt Flexing Resistance Pass

7. Split Tear Strength Pass

8. Compression Set Test Pass

9. Abrasion Resistance Pass

10. Slip Resistance Pass

1 Heavy Metals (Total Content)

Element Result (ppm) Clarks’ Requirement (ppm)

Total Lead (Pb) ND 90

Remark: ppm = Parts Per Million = mg/kg

Tested Components: Black Foam (Outsole Of Sample A).

2 Heavy Metals (Extractable Content)

Aluminium (Al) ND 300 28130

Remark : mg/kg = milligram per kilogram

Tested Components: Black Foam (Outsole Of Sample A).

3 Phthalate Content Test:

No. Compounds Clarks’

Remark: ND = Not Detected

Tested Components: Black Foam (Outsole Of Sample A).

71 Asker C 40-85 Asker C

6 Belt Flex Test (Clarks Test Method, No.205, Mandrel:φ 90 mm):

After 2,500 Flexes:

After 5,000 Flexes:

After 10,000 Flexes:

After 15,000 Flexes:

After 20,000 Flexes:

After 25,000 Flexes:

After 30,000 Flexes:

After 35,000 Flexes:

After 40,000 Flexes:

Remark: *= Spontaneous Cracking =＞40,000 Flexes. Cut Growth=＞20,000 Flexes.

7 Split Tear Strength (Clarks Test Method No. 206):

Along: 3.5 kgf/cm Min. 2.5 kgf/cm

8 Compression Set Test (Clarks Test Method No.208A):

Compression Set: 9% =< 30 %

9 Abrasion Resistance (Clarks Test Method No.218, Load: 10N):

Density: 0.33 g/cm3

You might also like