AC5100 Advanced Central Controller: Fire & Security Products

SiPass®
AC5100 integrated
Advanced Central Controller
Support for up to 64 doors and 1,000,000 cardholders

4 x Field Level Network (FLN) channels for local device connection
An important component of any security system is the controller. As the main hardware
component in your access and security network, the primary function of the controller is to
maintain your facility’s integrity. Making countless decisions on access attempts in real-
time, it must be reliable, consistent and unfailing. The Advanced Central Controller (ACC)
provides all of these attributes.
The ACC is a high performance access control and security field panel. The ACC is in-
stalled as an essential component of a Siemens integrated access control and security so-
lution. The ACC is capable of hosting multiple access control and security applications from
a single panel, including access management for up to 64 doors and 1,000,000 cardhold-
ers.
The ACC processes all events locally, independent of the host system. This ensures sys-
tem integrity even in the unlikely event of communications failure with the host.
The ACC receives cardholder information from a connected Reader Interface Module (RIM)
when each access attempt is made. The ACC then verifies this information and if the ap-
propriate privileges have been assigned to the cardholder, the ACC permits the door to be
opened.
Fire & Security Products

Siemens Building Technologies
Features
Support for up to 64 doors

4 x Field Level Network (FLN) channels for local device connection
1,000,000 cardholder database
Multi-tasking, microprocessor-based platform
32-Bit Processor (50MIPS)
64MB RAM
Diagnostic port for real-time system maintenance
Flash memory for remote firmware updates
Ethernet port for connection to the host system using TCP/IP
Configurable RS-232 / RS-485 / RS-422 port for high-level interfaces
Real-time clock battery
Local tamper input
Local alarm output (open collector)
21 status LEDs
Description
The ACC can be programmed with up to 1,000,000 cardholders and will grant access when
a cardholder presents a valid access card at a secure door.
The ACC has been specially designed for maximum flexibility, and provides four separate
Field Level Network (FLN) channels. Each FLN is capable of hosting up to 16 local devices
for the control of access, monitoring input devices or controlling output devices.
The ACC hosts a diagnostic port that allows a direct connection to its microprocessor to facili-
tate the download of operating instructions (firmware). Firmware updates are made without
having to visit the controller cabinets.
To facilitate communications with the host system, the ACC provides a 10/100MB Ethernet
connection. This allows communications over any WAN or LAN where devices on the net-
work can be assigned a unique IP address. This type of communication ensures the fastest
possible transaction times between the host system and ACC field panels.
To ensure that the ACC always monitors the access and security of an enterprise, it provides a
port for the connection of a backup battery. During those times of power failure, the backup bat-
tery will permit the ACC to maintain the integrity of the access control and security system.
The ACC hosts a Tamper input that can be used to detect if the cabinet in which it has
been mounted has been opened. It also provides an alarm output to visually or audibly
sound an alarm when security has been breached.

Technical data
Power Supply
Operating Voltage 24 VDC +20% -10%
Consumption Max. 10W fully loaded (with no battery charg-
ing)
RTC Battery 3.0V type CR2032
Communication Interface
1 x BLN (Building Level Network) 10/100MB Ethernet (RJ-45)
1 x BLN RS-485 (not active)
4 x FLN (Field Level Network) RS-485 (16 local devices max. on each FLN)
1 x Diagnostic/ Parameterisation RS-232 (RxD, TxD, GND, RJ-12)
Inputs
1 x Tamper Input Internally supplied, unsupervised
1 x Backup Battery 24 VDC
Outputs
1 x Alarm Output Open–Collector, 12 VDC / 100 mA
Dimensions (H x W x D) 291mm x 246mm x 98mm

11.46“ x 9.69“ x 3.86“
Environmental
Temperature Operation: 0 oC to 50 oC / 32oF to 122oF
Storage: -10 oC to 70 oC / 14oF to 158oF
Humidity 5-90% (non-condensing)
Details for ordering
Type Part no Designation Weight

AC51001 6FL7820-8BA10 Advanced Central Controller, 24 VDC 2,67 kg
CBL-010 6FL7820-8FB10 Parametrization cable ACC 0,2 kg
(RJ45 –Sub-D female 9 Pin)
ACK5110 6FL7820-8FB11 Connection cable Modem - ACC 0,2 kg
(RJ45 – Sub-D male 25 Pin)
1
Former type designation: ACC-010
3

Issued by © 2004 Copyright by
Siemens Building Technologies Siemens Building Technologies AG
Fire & Security Products GmbH & Co. oHG Data and design subject to change without notice.
D-76187 Karlsruhe Supply subject to availability.
Printed in the Federal Republic of Germany
www.sbt.siemens.com on environment-friendly chlorine-free paper.
Document no. A24205-A335-B118

Edition 07.2004

AC5100 Advanced Central Controller: Fire & Security Products

Uploaded by

Copyright:

Available Formats

AC5100 Advanced Central Controller: Fire & Security Products

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AC5100 Advanced Central Controller: Fire & Security Products

Uploaded by

Copyright:

Available Formats

SiPass®

Advanced Central Controller

Support for up to 64 doors and 1,000,000 cardholders

Fire & Security Products

Support for up to 64 doors

Siemens Building Technologies

Dimensions (H x W x D) 291mm x 246mm x 98mm

Details for ordering

Type Part no Designation Weight

Siemens Building Technologies

Document no. A24205-A335-B118

You might also like